WWP-OAM-MIB
84 objects
The MIB module for managing the new Ethernet OAM features introduced by the Ethernet in the First Mile task force (IEEE 802.3ah). The functionality presented here is based on IEEE 802.3ah [802.3ah], released in October, 2004. In particular, this MIB focused on the changes to Clause 30 of the draft that are not specific to any physical layer. These changes are primarily reflected in the new OAM features developed under this project, that can be applied to any Ethernet like interface. The OAM features are described in Clause 57 of [802.3ah]. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Std 802.3ah-2004: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan are networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', October 2004. [802-2001] refers to: 'IEEE Standard for LAN/MAN (Local Area Network/Metropolitan Area Network): Overview and Architecture', IEEE 802, June 2001. Copyright (c) The Internet Society (2005). This version of this MIB module is part of RFC XXXX; See the RFC itself for full legal notices.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TimeStamp |
| WWP-SMI | wwpModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.400 | IdentitywwpOamMibModule | The MIB module for managing the new Ethernet OAM features introduced by the Ethernet in the First Mile task force (IEEE 802.3ah). The functionality presented h… | ||
| 1.3.6.1.4.1.6141.2.400.1 | NodewwpOamMIB | |||
| 1.3.6.1.4.1.6141.2.400.1.1 | NodewwpOamConf | |||
| 1.3.6.1.4.1.6141.2.400.1.1.1 | NodewwpOamGroups | |||
| 1.3.6.1.4.1.6141.2.400.1.1.2 | NodewwpOamCompls | |||
| 1.3.6.1.4.1.6141.2.400.1.2 | NodewwpOamObjs | |||
| 1.3.6.1.4.1.6141.2.400.1.2.1 | TablewwpOamTable | not-accessible | current | Primary controls and status for the OAM capabilities of an Ethernet like interface. There will be one row in this table for each Ethernet like interface in the… |
| 1.3.6.1.4.1.6141.2.400.1.2.1.1 | RowwwpOamEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6141.2.400.1.2.1.1.1 | ColumnwwpOamAdminState | read-write | current | This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface. Th… |
| 1.3.6.1.4.1.6141.2.400.1.2.1.1.2 | ColumnwwpOamOperStatus | read-only | current | At initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may… |
| 1.3.6.1.4.1.6141.2.400.1.2.1.1.3 | ColumnwwpOamMode | read-write | current | This object configures the mode of OAM operation for this Ethernet like interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. These … |
| 1.3.6.1.4.1.6141.2.400.1.2.1.1.4 | ColumnwwpMaxOamPduSize | read-only | current | The largest OAMPDU that the OAM entity supports. OAM entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes be… |
| 1.3.6.1.4.1.6141.2.400.1.2.1.1.5 | ColumnwwpOamConfigRevision | read-only | current | The configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The config revision is used by OAM entities to indicate … |
| 1.3.6.1.4.1.6141.2.400.1.2.1.1.6 | ColumnwwpOamFunctionsSupported | read-only | current | The OAM functions supported on this Ethernet like interface. OAM consists of separate functional sets beyond the basic discovery process which is always requir… |
| 1.3.6.1.4.1.6141.2.400.1.2.1.1.7 | ColumnwwpOamPort | read-only | current | An Ethernet port on the switch. |
| 1.3.6.1.4.1.6141.2.400.1.2.2 | TablewwpOamPeerTable | not-accessible | current | Information about the OAM peer for a particular Ethernet like interface. OAM entities communicate with a single OAM peer entity on full-duplex Ethernet links o… |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1 | RowwwpOamPeerEntry | not-accessible | current | An entry in the table, containing information on the peer OAM entity for a single Ethernet like interface. Note that there is at most one OAM peer for each Eth… |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.1 | ColumnwwpOamPeerStatus | read-only | current | This object indicates whether the information in this row should be considered valid. When active(1), the information is valid and represents the current peer … |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.2 | ColumnwwpOamPeerMacAddress | read-only | current | The MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU. This value is initialized to all zeros (0x0000000000… |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.3 | ColumnwwpOamPeerVendorOui | read-only | current | The OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the … |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.4 | ColumnwwpOamPeerVendorInfo | read-only | current | The Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The vendor information field is within the… |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.5 | ColumnwwpOamPeerMode | read-only | current | The mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the C… |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.6 | ColumnwwpOamPeerMaxOamPduSize | read-only | current | The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this inte… |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.7 | ColumnwwpOamPeerConfigRevision | read-only | current | The configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration chang… |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.8 | ColumnwwpOamPeerFunctionsSupported | read-only | current | The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicate… |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.9 | ColumnwwpOamLocalPort | read-only | current | An Ethernet port on local switch. |
| 1.3.6.1.4.1.6141.2.400.1.2.3 | TablewwpOamLoopbackTable | not-accessible | current | This table contains methods to control the loopback state of the local link as well as indicating the status of the loopback function. Loopback can be used to … |
| 1.3.6.1.4.1.6141.2.400.1.2.3.1 | RowwwpOamLoopbackEntry | not-accessible | current | An entry in the table, containing information on the loopback status for a single Ethernet like interface. There is an entry in this table for every Ethernet l… |
| 1.3.6.1.4.1.6141.2.400.1.2.3.1.1 | ColumnwwpOamLoopbackCommand | read-write | current | This attribute initiates or terminates remote loopback with an OAM peer. Writing startRemoteLoopback(2) to this attribute cause the local OAM client to send a … |
| 1.3.6.1.4.1.6141.2.400.1.2.3.1.2 | ColumnwwpOamLoopbackStatus | read-only | current | The loopback status of the OAM entity. This status is determined by a combination of the local parser and multiplexer states, the remote parser and multiplexer… |
| 1.3.6.1.4.1.6141.2.400.1.2.3.1.3 | ColumnwwpOamLoopbackIgnoreRx | read-write | current | Since OAM loopback is a distruptive operation (user traffic does not pass), this attribute provides a mechanism to provide controls over whether received OAM l… |
| 1.3.6.1.4.1.6141.2.400.1.2.3.1.4 | ColumnwwpOamLoopbackPort | read-only | current | An Ethernet port on the switch |
| 1.3.6.1.4.1.6141.2.400.1.2.4 | TablewwpOamStatsTable | not-accessible | current | Statistics for the OAM function on a particular Ethernet like interface. |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1 | RowwwpOamStatsEntry | not-accessible | current | An entry in the table, containing statistics information on the Ethernet OAM function for a single Ethernet like interface. |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.1 | ColumnwwpOamInformationTx | read-only | current | A count of the number of Information OAMPDUs transmitted on this interface. An Information OAMPDU is indicated by a valid frame with (1) destination MAC addres… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.2 | ColumnwwpOamInformationRx | read-only | current | A count of the number of Information OAMPDUs received on this interface. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address e… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.3 | ColumnwwpOamUniqueEventNotificationTx | read-only | current | A count of the number of unique Event OAMPDUs transmitted on this interface. Event notifications may be sent in duplicate to increase the probability of succes… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.4 | ColumnwwpOamUniqueEventNotificationRx | read-only | current | A count of the number of unique Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of su… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.5 | ColumnwwpOamLoopbackControlTx | read-only | current | A count of the number of Loopback Control OAMPDUs transmitted on this interface. An Loopback Conrol OAMPDU is indicated by a valid frame with (1) destination M… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.6 | ColumnwwpOamLoopbackControlRx | read-only | current | A count of the number of Loopback Control OAMPDUs transmitted on this interface. An Loopback Control OAMPDU is indicated by a valid frame with (1) destination … |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.7 | ColumnwwpOamVariableRequestTx | read-only | current | A count of the number of Variable Request OAMPDUs transmitted on this interface. An Variable Request OAMPDU is indicated by a valid frame with (1) destination … |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.8 | ColumnwwpOamVariableRequestRx | read-only | current | A count of the number of Variable Request OAMPDUs received on this interface. An Variable Request OAMPDU is indicated by a valid frame with (1) destination MAC… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.9 | ColumnwwpOamVariableResponseTx | read-only | current | A count of the number of Variable Response OAMPDUs transmitted on this interface. An Variable Response OAMPDU is indicated by a valid frame with (1) destinatio… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.10 | ColumnwwpOamVariableResponseRx | read-only | current | A count of the number of Variable Response OAMPDUs received on this interface. An Variable Response OAMPDU is indicated by a valid frame with (1) destination M… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.11 | ColumnwwpOamOrgSpecificTx | read-only | current | A count of the number of Organization Specific OAMPDUs transmitted on this interface. An Organization Specific OAMPDU is indicated by a valid frame with (1) de… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.12 | ColumnwwpOamOrgSpecificRx | read-only | current | A count of the number of Organization Specific OAMPDUs received on this interface. An Organization Specific OAMPDU is indicated by a valid frame with (1) desti… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.13 | ColumnwwpOamUnsupportedCodesTx | read-only | current | A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. An unsupported opcode OAMPDU is indicated by a valid frame with (1)… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.14 | ColumnwwpOamUnsupportedCodesRx | read-only | current | A count of the number of OAMPDUs received on this interface with an unsupported op-code. An unsupported opcode OAMPDU is indicated by a valid frame with (1) de… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.15 | ColumnwwpOamframesLostDueToOam | read-only | current | A count of the number of frames that were dropped by the OAM multiplexer. Since the OAM mulitplexer has multiple inputs and a single output, there may be cases… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.16 | ColumnwwpOamStatsPort | read-only | current | An Ethernet port on the switch |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.17 | ColumnwwpOamDuplicateEventNotificationTx | read-only | current | A count of the number of duplicate Event OAMPDUs transmitted on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability… |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.18 | ColumnwwpOamDuplicateEventNotificationRx | read-only | current | A count of the number of duplicate Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of… |
| 1.3.6.1.4.1.6141.2.400.1.2.5 | ScalarwwpOamSystemEnableDisable | read-write | current | Global Enable/disable OAM on the switch |
| 1.3.6.1.4.1.6141.2.400.1.2.6 | TablewwpOamEventConfigTable | not-accessible | current | Ethernet OAM includes the ability to generate and receive event notifications to indicate various link problems. This table contains the mechanisms to configur… |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1 | RowwwpOamEventConfigEntry | not-accessible | current | Event configuration information is available for every Ethernet like interface that supports OAM and the event function of OAM as indicated in the wwpOamFuncti… |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.1 | ColumnwwpOamEventPort | read-only | current | An Ethernet port on the switch |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.2 | ColumnwwpOamErrFramePeriodWindow | read-write | current | The number of frames over which the threshold is defined. The default value of the window is the number of minimum size Ethernet frames that can be received ov… |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.3 | ColumnwwpOamErrFramePeriodThreshold | read-write | current | The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If wwpOamErrFramePeriodThreshold frame errors … |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.4 | ColumnwwpOamErrFramePeriodEvNotifEnable | read-write | current | Indicates whether the occurence of an Errored Frame Period Event should result in an Event Notification OAMPDU generated by the OAM layer. By default, this obj… |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.5 | ColumnwwpOamErrFrameWindow | read-write | current | The amount of time (in 100ms increments) over which the threshold is defined. The default value is 10 (1 second). If wwpOamErrFrameThreshold frame errors occur… |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.6 | ColumnwwpOamErrFrameThreshold | read-write | current | The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If wwpOamErrFrameThreshold frame errors occur … |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.7 | ColumnwwpOamErrFrameEvNotifEnable | read-write | current | Indicates whether the occurence of an Errored Frame Event should result in an Event Notification OAMPDU generated by the OAM layer. By default, this object sho… |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.8 | ColumnwwpOamErrFrameSecsSummaryWindow | read-write | current | The amount of time (in 100ms intervals) over which the threshold is defined. The default value is 600 (60 seconds). If wwpOamErrFrameSecsSummaryThreshold frame… |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.9 | ColumnwwpOamErrFrameSecsSummaryThreshold | read-write | current | The number of errored frame seconds that must occur for this event to be triggered. The default value is one errored frame second. If wwpOamErrFrameSecsSummary… |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.10 | ColumnwwpOamErrFrameSecsEvNotifEnable | read-write | current | Indicates whether the occurence of an Errored Frame Seconds Summary Event should result in an Event Notification OAMPDU generated by the OAM layer. By default,… |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.11 | ColumnwwpOamDyingGaspEnable | read-write | current | Indicates whether the local device should attempt to indicate a dying gasp fault via the OAMPDU flags field to its peer OAM entity. If the system does not supp… |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.12 | ColumnwwpOamCriticalEventEnable | read-write | current | Indicates whether the local device should attempt to indicate a critical event fault via the OAMPDU flags field to its peer OAM entity. If the system does not … |
| 1.3.6.1.4.1.6141.2.400.1.2.7 | TablewwpOamEventLogTable | not-accessible | current | This table records a history of the events that have occurred at the Ethernet OAM level. These events can include locally detected events, which may result in … |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1 | RowwwpOamEventLogEntry | not-accessible | current | An entry in the wwpOamEventLogTable. |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.1 | ColumnwwpOamEventLogPort | read-only | current | An Ethernet port on the switch |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.2 | ColumnwwpOamEventLogIndex | read-only | current | An arbitrary integer for identifiying individual events within the event log. |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.3 | ColumnwwpOamEventLogTimestamp | read-only | current | The value of sysUpTime at the time of the logged event. For locally generated events, the time of the event can be accurately retrieved from sysUpTime. For rem… |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.4 | ColumnwwpOamEventLogOui | read-only | current | The OUI of the entity defining the object type. All IEEE 802.3 defined events (as appearing in [802.3ah] except for the Organizationally Unique Event TLVs) use… |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.5 | ColumnwwpOamEventLogType | read-only | current | The type of event that generated this entry in the event log. When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSym… |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.6 | ColumnwwpOamEventLogLocation | read-only | current | Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM. |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.7 | ColumnwwpOamEventLogWindowHi | read-only | current | If the event represents a threshold crossing event, the two objects wwpOamEventWindowHi and wwpOamEventWindowLo form an unsigned 64-bit integer yielding the wi… |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.8 | ColumnwwpOamEventLogWindowLo | read-only | current | If the event represents a threshold crossing event, the two objects wwpOamEventWindowHi and wwpOamEventWindowLo form an unsigned 64-bit integer yielding the wi… |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.9 | ColumnwwpOamEventLogThresholdHi | read-only | current | If the event represents a threshold crossing event, the two objects wwpOamEventThresholdHi and wwpOamEventThresholdLo form an unsigned 64-bit integer yielding … |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.10 | ColumnwwpOamEventLogThresholdLo | read-only | current | If the event represents a threshold crossing event, the two objects wwpOamEventThresholdHi and wwpOamEventThresholdLo form an unsigned 64-bit integer yielding … |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.11 | ColumnwwpOamEventLogValue | read-only | current | If the event represents a threshold crossing event, this value indicates the value of the parameter within the given window that generated this event (e.g. 11,… |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.12 | ColumnwwpOamEventLogRunningTotal | read-only | current | This value respresents the total number of times this occurence has happened since the last reset (e.g. 3253, when 3253 symbol errors have occurred since the l… |
| 1.3.6.1.4.1.6141.2.400.1.2.7.1.13 | ColumnwwpOamEventLogEventTotal | read-only | current | This value respresents the total number of times one or ore of these occurences have resulted in an event (e.g. 51 when 3253 symbol errors have occurred since … |
| 1.3.6.1.4.1.6141.2.400.1.3 | NodewwpOamEvents | |||
| 1.3.6.1.4.1.6141.2.400.1.3.0 | NodewwpOamEventsV2 |