WWP-PING-MIB
15 objects
The MIB for WWP Ping
Imported Objects
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| WWP-SMI | wwpModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.21 | IdentitywwpPingMIB | The MIB for WWP Ping | ||
| 1.3.6.1.4.1.6141.2.21.1 | NodewwpPingMIBObjects | |||
| 1.3.6.1.4.1.6141.2.21.1.1 | ScalarwwpPingDelay | read-write | current | The object specifies the minimum amount of time to wait before sending the next packet in a sequence after receiving a response or declaring a timeout for a pr… |
| 1.3.6.1.4.1.6141.2.21.1.2 | ScalarwwpPingPacketSize | read-write | current | The size of the ping packets to send to the target. |
| 1.3.6.1.4.1.6141.2.21.1.3 | ScalarwwpPingActivate | read-write | current | Ping can be activated by setting this object to true. Once the ping operation is completed , the object is set to 'false'. This object can be set to 'false' by… |
| 1.3.6.1.4.1.6141.2.21.1.4 | ScalarwwpPingAddress | read-write | current | The address of the device to be pinged. The default value should be of the loopback address. |
| 1.3.6.1.4.1.6141.2.21.1.5 | ScalarwwpPingPacketCount | read-write | current | Specifies the number of icmp requests to send to the target. |
| 1.3.6.1.4.1.6141.2.21.1.6 | ScalarwwpPingPacketTimeout | read-write | current | Specifies the amount of time to wait for a response to a transmitted packet before declaring the packet 'dropped'. |
| 1.3.6.1.4.1.6141.2.21.1.8 | ScalarwwpPingSentPackets | read-only | current | The number of ping packets that have been sent to the target. |
| 1.3.6.1.4.1.6141.2.21.1.9 | ScalarwwpPingReceivedPackets | read-only | current | The number of ping packets that have been reveived from the target. |
| 1.3.6.1.4.1.6141.2.21.1.13 | ScalarwwpPingFailCause | read-only | current | The result of the ping. |
| 1.3.6.1.4.1.6141.2.21.1.15 | ScalarwwpPingState | read-only | current | The state of the ping process.The state be pinging, idle, complete or failed. |
| 1.3.6.1.4.1.6141.2.21.1.16 | ScalarwwpPingUntilStopped | read-write | current | setting this object to true prior to wwpPingActivate will cause the device to ping the specified host until wwpPingActivate is set to false. The object can't b… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PingFailCause | INTEGER { unknownHost(1), socketError(2), bindError(3), connectError(4), missingHost(5), asyncError(6), nonBlockError(7), mcastError(8), ttlError(9), mcastTtlError(10), outputError(11), unreachableError(12), isAlive(13), txRx(14), commandCompleted(15), noStatus(16), sendRecvMismatch(17) } | current | Description. |
| PingState | INTEGER { idle(1), pinging(2), pingComplete(3), failed(4) } | current | Description. |