WWP-VOICE-GATEWAY-MIB
107 objects
This MIB module degines the managed objects for WWP voice gateway.
Imported Objects
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| WWP-SMI | wwpModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.43 | IdentitywwpVoiceGatewayMIB | This MIB module degines the managed objects for WWP voice gateway. | ||
| 1.3.6.1.4.1.6141.2.43.1 | NodewwpVoiceGatewayMIBObjects | |||
| 1.3.6.1.4.1.6141.2.43.1.1 | NodewwpVoiceGateway | |||
| 1.3.6.1.4.1.6141.2.43.1.1.1 | NodewwpVoiceGatewayMGCP | |||
| 1.3.6.1.4.1.6141.2.43.1.1.1.1 | TablewwpVoiceGatewayEndPointTable | not-accessible | current | A table of the voice gateway endpoints. |
| 1.3.6.1.4.1.6141.2.43.1.1.1.1.1 | RowwwpVoiceGatewayEndPointEntry | not-accessible | current | An entry of the voice gateway endpoint. |
| 1.3.6.1.4.1.6141.2.43.1.1.1.1.1.1 | ColumnwwpVoiceGatewayEndPointId | read-only | current | Index for the the endpoint entry. |
| 1.3.6.1.4.1.6141.2.43.1.1.1.1.1.2 | ColumnwwpVoiceGatewayEndpoint | read-write | current | The endpoint for the voice Gateway. This object should be set to a zero length string if the Management Station wish to use the Endpoint's IP Address as the En… |
| 1.3.6.1.4.1.6141.2.43.1.1.1.2 | ScalarwwpVoiceGatewayCallAgentAddr | read-write | current | This object is used to configure either the domain name or the IP address of the Call Agent in standard dot notation. The complete address of a default call ag… |
| 1.3.6.1.4.1.6141.2.43.1.1.1.3 | ScalarwwpVoiceGatewayCallAgentUDPPort | read-write | current | This object is used to configure the UDP port of the Call Agent. The UDP port is used together with wwpVoiceGatewayCallAgentAddr to specify the destination add… |
| 1.3.6.1.4.1.6141.2.43.1.1.1.4 | ScalarwwpVoiceGatewayCallAgentProtocol | read-write | current | Setting this object to 'rfc2705' will enable support of RFC 2705 for this CallAgent (Only 'L' Event Package). Setting this object to 'ncs1.0' will enable suppo… |
| 1.3.6.1.4.1.6141.2.43.1.1.1.5 | ScalarwwpVoiceGatewaySupportMessagePiggybacking | read-write | current | Setting this object to 'false' will disable message Piggybacking for this Voice Gateway. |
| 1.3.6.1.4.1.6141.2.43.1.1.1.6 | ScalarwwpVoiceGatewayRsipKeepAliveEnable | read-write | current | Setting this object to 'enable' will configure the device to send periodic RSIP x-keepalive messages. |
| 1.3.6.1.4.1.6141.2.43.1.1.1.7 | ScalarwwpVoiceGatewayRsipKeepAliveInterval | read-write | current | Configures the interval at which RSIP x-keepalive messages are transmitted |
| 1.3.6.1.4.1.6141.2.43.1.1.2 | NodewwpVoiceGatewayCountry | |||
| 1.3.6.1.4.1.6141.2.43.1.1.2.1 | ScalarwwpVoiceGatewayCountryCodes | read-write | current | This object specifies the country for different tone and ring settings. |
| 1.3.6.1.4.1.6141.2.43.1.1.3 | NodewwpVoiceGatewayCodec | |||
| 1.3.6.1.4.1.6141.2.43.1.1.3.1 | ScalarwwpVoiceGatewayComplexCodec | read-write | current | Setting this object to 'g711(0)' will only enable G711U and G711A Codec. If this object is set to 'g729(3)', then G729A and G729AB Codec will be used. |
| 1.3.6.1.4.1.6141.2.43.1.1.3.2 | ScalarwwpVoiceGatewaySilenceSuppression | read-write | current | Setting this object to 'false' will disable the silence suppression for the complex codes specified by wwpVoiceGatewayComplexCodec. |
| 1.3.6.1.4.1.6141.2.43.1.1.3.3 | ScalarwwpVoiceGatewayEchoCancellation | read-write | current | Setting this object to 'false' will disable the echo cancellation for the complex codes specified by wwpVoiceGatewayComplexCodec. |
| 1.3.6.1.4.1.6141.2.43.1.1.3.4 | ScalarwwpVoiceGatewayPacketizationMinPeriod | read-write | current | Min packet time for the complex codes specified by wwpVoiceGatewayComplexCodec. FOR G723 the packet time is fixed to be 30ms. |
| 1.3.6.1.4.1.6141.2.43.1.1.3.5 | ScalarwwpVoiceGatewayPacketizationMaxPeriod | read-write | current | Max packet time for the complex codes specified by wwpVoiceGatewayComplexCodec. FOR G723 the packet time is fixed to be 30ms. |
| 1.3.6.1.4.1.6141.2.43.1.1.4 | NodewwpVoiceGatewayAudio | |||
| 1.3.6.1.4.1.6141.2.43.1.1.4.1 | ScalarwwpVoiceGatewayPayloadType | read-write | current | The Payload Format for the telephone events. |
| 1.3.6.1.4.1.6141.2.43.1.1.4.2 | ScalarwwpVoiceGatewaySendEventsViaRFC2833 | read-write | current | Setting this object to 'true' will cause the voice gateway to send Telephone Events via RFC2833 signalling using wwpVoiceGatewayPayloadType. |
| 1.3.6.1.4.1.6141.2.43.1.1.4.3 | ScalarwwpVoiceGatewayDropVoicePktsDuringEvents | read-write | current | Setting this object to 'true' will cause the voice gateway to drop voice packets during RFC2833 Telephone Event packets. |
| 1.3.6.1.4.1.6141.2.43.1.1.4.4 | ScalarwwpVoiceGatewaySquelchInbandDtmfAudio | read-write | current | Setting this object to 'true' will cause the voice gateway to Squelch the Inband DTMF Audio. |
| 1.3.6.1.4.1.6141.2.43.1.1.5 | NodewwpVoiceGatewayStats | |||
| 1.3.6.1.4.1.6141.2.43.1.1.5.1 | ScalarwwpVoiceGatewayPktsTx | read-only | current | The total number of RTP data packets transmitted by the voice gateway since starting transmission on this connection. |
| 1.3.6.1.4.1.6141.2.43.1.1.5.2 | ScalarwwpVoiceGatewayOctetsTx | read-only | current | The total number of payload octets (i.e., not including header or padding) transmitted in RTP data packets by the voice gateway since starting transmission on … |
| 1.3.6.1.4.1.6141.2.43.1.1.5.3 | ScalarwwpVoiceGatewayPktsRx | read-only | current | The total number of RTP data packets received by the voice gateway since starting reception on this connection. |
| 1.3.6.1.4.1.6141.2.43.1.1.5.4 | ScalarwwpVoiceGatewayOctetsRx | read-only | current | The total number of payload octets (i.e., not including header or padding) transmitted in RTP data packets by the voice gateway since starting transmission on … |
| 1.3.6.1.4.1.6141.2.43.1.1.5.5 | ScalarwwpVoiceGatewayPktsLost | read-only | current | The total number of RTP data packets that have been lost since the beginning of reception. This number is defined to be the number of packets expected less the… |
| 1.3.6.1.4.1.6141.2.43.1.1.5.6 | ScalarwwpVoiceGatewayIntervalJitter | read-only | current | An estimate of the statistical variance of the RTP data packet interarrival time measured in milliseconds and expressed as an unsigned integer. The interarriva… |
| 1.3.6.1.4.1.6141.2.43.1.1.5.7 | ScalarwwpVoiceGatewayLatency | read-only | current | An estimate of the network latency, expressed in milliseconds. This is the average value of the difference between the NTP timestamp indicated by the senders o… |
| 1.3.6.1.4.1.6141.2.43.1.1.5.8 | ScalarwwpVoiceGatewayResetStatCounters | read-write | current | To reset voice statistic counters , this object should be set to 'reset'. A read on this object should return none(0). |
| 1.3.6.1.4.1.6141.2.43.1.1.6 | NodewwpVoiceReset | |||
| 1.3.6.1.4.1.6141.2.43.1.1.6.1 | ScalarwwpVoiceGatewayNumResets | read-only | current | This object defines the number of times that the voice gateway has been restarted. |
| 1.3.6.1.4.1.6141.2.43.1.1.6.2 | ScalarwwpVoiceGatewayReset | read-write | current | Writing one of the specified values to this field causes the specified type of reboot to occur. none is the value returned when this leaf is queried. writing t… |
| 1.3.6.1.4.1.6141.2.43.1.1.7 | NodewwpVoiceSec | |||
| 1.3.6.1.4.1.6141.2.43.1.1.7.1 | ScalarwwpVoiceAccess | read-write | current | Setting this object to 'deny' will disable access to VMI from SMI when connected via Telnet or console. |
| 1.3.6.1.4.1.6141.2.43.1.1.7.2 | ScalarwwpMgmtAccess | read-write | current | Setting this object to 'deny' will disable access to SMI from VMI when connected via Telnet or console. |
| 1.3.6.1.4.1.6141.2.43.1.1.8 | NodewwpVoiceGatewayConfigCallAgent | |||
| 1.3.6.1.4.1.6141.2.43.1.1.8.1 | ScalarwwpVoiceCallAgentOtaModes | read-write | current | Setting this object to 'ifOtaRecv' will configure the device to send OTA if and only if OTA is received from call Agent. Setting this object to 'sendOta' will … |
| 1.3.6.1.4.1.6141.2.43.1.1.8.2 | ScalarwwpVoiceCallAgentEgressEvent | read-write | current | Setting this object to 'sendIngressEgressNotif' will configure the device to send ingress and egress fax and modem tone notification. Setting this object to 's… |
| 1.3.6.1.4.1.6141.2.43.1.1.9 | NodewwpVoiceGatewayConfigPots | |||
| 1.3.6.1.4.1.6141.2.43.1.1.9.1 | ScalarwwpVoiceCallAgentPotsLine | read-write | current | Setting this object to 'enable1PotLine' will configure the device to enable Line 1 only. Setting this object to 'enable2PotLine' will configure the device to e… |
| 1.3.6.1.4.1.6141.2.43.1.1.10 | NodewwpVoiceGatewayConfigFax | |||
| 1.3.6.1.4.1.6141.2.43.1.1.10.1 | ScalarwwpVoiceAutonomousFaxState | read-write | current | Setting this object to 'enable' will configure the device to enable autonomous fax behavior. Setting this object to 'disable' will configure the device to disa… |
| 1.3.6.1.4.1.6141.2.43.1.1.11 | NodewwpVoiceGatewayConfigEndPoint | |||
| 1.3.6.1.4.1.6141.2.43.1.1.11.1 | ScalarwwpVoiceEndPointName | read-write | current | Setting this object will control how a voip endpoint name will be determined. This object cannot be set to 'unknown'. |
| 1.3.6.1.4.1.6141.2.43.1.1.12 | NodewwpVoiceGatewayConfigNotifEntityCache | |||
| 1.3.6.1.4.1.6141.2.43.1.1.12.1 | ScalarwwpVoiceNotifEntCache | read-write | current | Timeout in minutes for cached DNS lookups for MGCP RQNT Notified Entity field |
| 1.3.6.1.4.1.6141.2.43.1.1.13 | NodewwpVoiceGatewayConfigJitterBuffer | |||
| 1.3.6.1.4.1.6141.2.43.1.1.13.1 | ScalarwwpVoiceJitterOptionState | read-write | current | Setting this object to 'enable' will configure the jitter buffer to change to an adaptive jitter buffer size. Setting this object to 'disable' will configure t… |
| 1.3.6.1.4.1.6141.2.43.1.1.14 | NodewwpVoiceGatewayConfigJitterBufferMinPeriod | |||
| 1.3.6.1.4.1.6141.2.43.1.1.14.1 | ScalarwwpVoiceJitterBufferMinPeriod | read-write | current | Minimum Holding time. Setting this value will limit the jitter buffer from adapting below this value. The smallest period is fixed at 20ms. |
| 1.3.6.1.4.1.6141.2.43.1.1.15 | NodewwpVoiceGatewayConfigJitterBufferMaxPeriod | |||
| 1.3.6.1.4.1.6141.2.43.1.1.15.1 | ScalarwwpVoiceJitterBufferMaxPeriod | read-write | current | Maximum Holding time. Setting this value will limit the jitter buffer from adapting above this value. The largest period is fixed at 300ms. |
| 1.3.6.1.4.1.6141.2.43.1.1.16 | NodewwpVoiceGatewayConfigJitterBufferTargetPeriod | |||
| 1.3.6.1.4.1.6141.2.43.1.1.16.1 | ScalarwwpVoiceJitterBufferTargetPeriod | read-write | current | Target Holding time. Setting this value sets the initial jitter buffer size. |
| 1.3.6.1.4.1.6141.2.43.1.1.17 | NodewwpVoiceGatewayConfigCodecOverride | |||
| 1.3.6.1.4.1.6141.2.43.1.1.17.1 | ScalarwwpVoiceGatewayCodecOverride | read-write | current | Selecting data codec override forces the default data codec to the specified value, overriding the standard default data codec which is tied to country code. 1… |
| 1.3.6.1.4.1.6141.2.43.1.1.18 | NodewwpVoiceGatewayConfigTestServerConnection | |||
| 1.3.6.1.4.1.6141.2.43.1.1.18.1 | ScalarwwpVoiceGatewayTestServerConnection | read-write | current | Writing one of the specified values to this field causes mesages to be sent to voice server to test connectivity |
| 1.3.6.1.4.1.6141.2.43.1.1.19 | NodewwpVoiceGatewayConfigLastServerResponseTime | |||
| 1.3.6.1.4.1.6141.2.43.1.1.19.1 | ScalarwwpVoiceGatewayLastServerResponseTime | read-only | current | Last server response timestamp. Used as part of testing voice server connectivity |
| 1.3.6.1.4.1.6141.2.43.1.1.20 | NodewwpVoiceGatewaySIP | |||
| 1.3.6.1.4.1.6141.2.43.1.1.20.1 | ScalarwwpVoiceGatewaySipSessionTimeoutPeriod | read-write | current | Configures session expiration time in seconds. Set value to 0 to disable |
| 1.3.6.1.4.1.6141.2.43.1.1.20.2 | ScalarwwpVoiceGatewaySipRegisterTimeoutPeriod | read-write | current | Configures registration expiration time in seconds. Used only when registrar is used. Set value to 0 to disable. |
| 1.3.6.1.4.1.6141.2.43.1.1.20.3 | ScalarwwpVoiceGatewaySipForceQuotesState | read-write | current | Configuration to force display names to be embraced by double quotes. |
| 1.3.6.1.4.1.6141.2.43.1.1.20.4 | TablewwpVoiceGatewaySipPhoneLineTable | not-accessible | current | SIP Pots Line table This table confures users for each POTs line |
| 1.3.6.1.4.1.6141.2.43.1.1.20.4.1 | RowwwpVoiceGatewaySipPhoneLineEntry | not-accessible | current | table of sip line configuration |
| 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.1 | ColumnwwpVoiceGatewaySipLineId | read-only | current | Pots port Id |
| 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.2 | ColumnwwpVoiceGatewaySipPhoneNumber | read-create | current | Phone Number associated with this line. |
| 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.3 | ColumnwwpVoiceGatewaySipUserName | read-create | current | User Name associated with this line. |
| 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.4 | ColumnwwpVoiceGatewaySipUserDisplayName | read-create | current | User Display Name associated with this line. |
| 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.5 | ColumnwwpVoiceGatewaySipUserPassword | read-create | current | User Password associated with this line. |
| 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.6 | ColumnwwpVoiceGatewaySipDialPlan | read-write | current | Configuration for dial plan expression string. Note: subset of unix regular expressions supported. |
| 1.3.6.1.4.1.6141.2.43.1.1.20.5 | TablewwpVoiceGatewaySipPhoneLineTimerTable | not-accessible | current | SIP Pots Line table This table configures users for each POTs line |
| 1.3.6.1.4.1.6141.2.43.1.1.20.5.1 | RowwwpVoiceGatewaySipPhoneLineTimerEntry | not-accessible | current | Table of sip phone line configuration |
| 1.3.6.1.4.1.6141.2.43.1.1.20.5.1.1 | ColumnwwpVoiceGatewaySipTimerLineId | read-only | current | Pots port Id |
| 1.3.6.1.4.1.6141.2.43.1.1.20.5.1.2 | ColumnwwpVoiceGatewaySipDialTimerLong | read-write | current | Long Timeout for SIP dialing |
| 1.3.6.1.4.1.6141.2.43.1.1.20.6 | NodewwpVoiceGatewaySIPServers | |||
| 1.3.6.1.4.1.6141.2.43.1.1.20.6.1 | NodewwpVoiceGatewaySIPProxyServers | |||
| 1.3.6.1.4.1.6141.2.43.1.1.20.6.1.1 | ScalarwwpVoiceGatewaySipProxyAddr | read-write | current | The complete address of a default Proxy is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayRegistrarAddr specifies address of the Proxy server … |
| 1.3.6.1.4.1.6141.2.43.1.1.20.6.1.2 | ScalarwwpVoiceGatewaySipProxyPort | read-write | current | This object is used to configure the UDP port of the SIP Proxy Server. The UDP port is used together with wwpVoiceGatewaySipProxyAddr to specify the destinatio… |
| 1.3.6.1.4.1.6141.2.43.1.1.20.6.2 | NodewwpVoiceGatewaySIPRegistrarServers | |||
| 1.3.6.1.4.1.6141.2.43.1.1.20.6.2.1 | ScalarwwpVoiceGatewaySipRegistrarAddr | read-write | current | The complete address of a default Registrar is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayRegistrarAddr specifies address of the Regsitrar… |
| 1.3.6.1.4.1.6141.2.43.1.1.20.6.2.2 | ScalarwwpVoiceGatewaySipRegistrarPort | read-write | current | This object is used to configure the UDP port of the SIP Registrar. The UDP port is used together with wwpVoiceGatewaySipRegistrarAddr to specify the destinati… |
| 1.3.6.1.4.1.6141.2.43.1.1.20.6.3 | NodewwpVoiceGatewaySIPLogServers | |||
| 1.3.6.1.4.1.6141.2.43.1.1.20.6.3.1 | ScalarwwpVoiceGatewaySipSyslogAddr | read-write | current | The complete address of a default SIP SysLog server is composed of IP address/Domain Name and UDP port. wwpVoiceGatewaySipSyslogAddr specifies address of the S… |
| 1.3.6.1.4.1.6141.2.43.1.1.20.6.3.2 | ScalarwwpVoiceGatewaySipSyslogPort | read-write | current | This object is used to configure the UDP port of the SIP Log Servert. The UDP port is used together with wwpVoiceGatewaySipSyslogAddr to specify the destinatio… |
| 1.3.6.1.4.1.6141.2.43.1.1.20.6.3.3 | ScalarwwpVoiceGatewaySipSyslogLogLevel | read-write | current | This object is used to configure the log level or verbosity of the SIP messages |
| 1.3.6.1.4.1.6141.2.43.1.1.20.7 | ScalarwwpVoiceGatewaySIPPreferredCodec | read-write | current | Configuration to set preferred codec. |
| 1.3.6.1.4.1.6141.2.43.1.1.20.8 | ScalarwwpVoiceGatewaySIPDtmfEventHandling | read-write | current | Configuration for device to send DTMF digits via SIP INFO message or in RTP RFC2833 event message in addition to the audio tone in RTP stream. The default is a… |
| 1.3.6.1.4.1.6141.2.43.1.1.20.9 | NodewwpVoiceGatewaySIPCallFeatures | |||
| 1.3.6.1.4.1.6141.2.43.1.1.20.9.1 | ScalarwwpVoiceGatewayHookFlashEnable | read-write | current | Setting this object to 'true' will configure the device to process hook flash events.. Setting this object to 'false' will configure the device to ignore hookf… |
| 1.3.6.1.4.1.6141.2.43.1.1.21 | NodewwpVoiceGatewayConfigProtocolType | |||
| 1.3.6.1.4.1.6141.2.43.1.1.21.1 | ScalarwwpVoiceGatewayProtocolType | read-write | current | Configuration to select VoIP protocol. Setting this value to 'mgcp' will allow the configuration the MGCP funtionality. Setting this value to 'sip' will allow … |
| 1.3.6.1.4.1.6141.2.43.1.1.22 | NodewwpVoiceGatewayConfigProtocolEnable | |||
| 1.3.6.1.4.1.6141.2.43.1.1.22.1 | ScalarwwpVoiceGatewayProtocolEnable | read-write | current | Configuration to enable VoIP protocol. Setting this value to 'enable' will cause VoIP stack to start at bootup |
| 1.3.6.1.4.1.6141.2.43.2 | NodewwpVoiceGatewayMIBNotificationPrefix | |||
| 1.3.6.1.4.1.6141.2.43.2.0 | NodewwpVoiceGatewayMIBNotifications | |||
| 1.3.6.1.4.1.6141.2.43.3 | NodewwpVoiceGatewayMIBConformance | |||
| 1.3.6.1.4.1.6141.2.43.3.1 | NodewwpVoiceGatewayMIBCompliances | |||
| 1.3.6.1.4.1.6141.2.43.3.2 | NodewwpVoiceGatewayMIBGroups |