WWP-XCVR-MIB
31 objects
The MIB module for the WWP System physical transceiver devices.
Imported Objects
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| WWP-SMI | wwpModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.14 | IdentitywwpXcvrMIB | The MIB module for the WWP System physical transceiver devices. | ||
| 1.3.6.1.4.1.6141.2.14.1 | NodewwpXcvrMIBObjects | |||
| 1.3.6.1.4.1.6141.2.14.1.1 | NodewwpXcvr | |||
| 1.3.6.1.4.1.6141.2.14.1.1.1 | TablewwpXcvrTable | not-accessible | current | This table contains descriptions and settings for each of the physical transceiver devices. |
| 1.3.6.1.4.1.6141.2.14.1.1.1.1 | RowwwpXcvrEntry | not-accessible | current | The Transciever Device Entry. |
| 1.3.6.1.4.1.6141.2.14.1.1.1.1.1 | ColumnwwpXcvrPortXcvrId | read-only | current | Indicates the logical port in-which this transciever belongs to. |
| 1.3.6.1.4.1.6141.2.14.1.1.1.1.2 | ColumnwwpXcvrId | read-only | current | The id for the transceiver. |
| 1.3.6.1.4.1.6141.2.14.1.1.1.1.3 | ColumnwwpXcvrFiberType | read-only | current | The fiber type of this transceiver. Possible values: lx 1000BASE-LX fiber sx 1000BASE-SX fiber cx 1000BASE-CX fiber t 1000BASE-T unknown Unknown type |
| 1.3.6.1.4.1.6141.2.14.1.1.1.1.4 | ColumnwwpXcvrVendorName | read-only | current | String containing this transceiver's vendor name. |
| 1.3.6.1.4.1.6141.2.14.1.1.1.1.5 | ColumnwwpXcvrPartNum | read-only | current | String containing this transceiver's part number. |
| 1.3.6.1.4.1.6141.2.14.1.1.1.1.6 | ColumnwwpXcvrPartRev | read-only | current | String containing this tranceiver's part revision. |
| 1.3.6.1.4.1.6141.2.14.1.1.1.1.7 | ColumnwwpXcvrTxEnabled | read-write | current | Indicates whether this transceiver is currently set to transmit. |
| 1.3.6.1.4.1.6141.2.14.1.1.1.1.8 | ColumnwwpXcvrRxSignalStatus | read-only | current | Indicates whether this transceiver is currently detecting a Receive (RX) signal. |
| 1.3.6.1.4.1.6141.2.14.1.1.1.1.9 | ColumnwwpXcvrTxFaultStatus | read-only | current | Indicates the fault status of this transceiver. |
| 1.3.6.1.4.1.6141.2.14.1.1.2 | TablewwpXcvrPortTable | not-accessible | current | The table contains of the logical ports which have transceivers. |
| 1.3.6.1.4.1.6141.2.14.1.1.2.1 | RowwwpXcvrPortEntry | not-accessible | current | The logical Port Entry. |
| 1.3.6.1.4.1.6141.2.14.1.1.2.1.1 | ColumnwwpXcvrPortId | read-only | current | Indicates the logical port in-which this transciever belongs to. |
| 1.3.6.1.4.1.6141.2.14.1.1.2.1.2 | ColumnwwpXcvrPortHoldDownTime | read-write | deprecated | Indicates the hold-down time (in seconds) for this logical port. This value is used to help smooth out possible flapping between XCVRs of the bank when a link … |
| 1.3.6.1.4.1.6141.2.14.1.1.2.1.3 | ColumnwwpXcvrPortRedOrDiagMode | read-write | current | This object can be used to bring the Xcvr to the Manual mode. This also shows the port redundancy status for this logical port. |
| 1.3.6.1.4.1.6141.2.14.1.1.2.1.4 | ColumnwwpXcvrPortPreferredXcvr | read-write | current | Indicates which transceiver is preferred. This transceiver will be used by default, but if it goes down, the alternate will be used. |
| 1.3.6.1.4.1.6141.2.14.1.1.2.1.5 | ColumnwwpXcvrPortActiveXcvr | read-only | current | Indicates which transceiver is currently active. |
| 1.3.6.1.4.1.6141.2.14.1.2 | NodewwpXcvrNotif | |||
| 1.3.6.1.4.1.6141.2.14.1.2.1 | ScalarwwpXcvrEventType | read-only | current | Indicates if the Xcvr specified by the wwpXcvrPortId and wwpXcvrId has come up, gone down or has been selected. This object only make sense for wwpXcvrLinkStat… |
| 1.3.6.1.4.1.6141.2.14.1.2.2 | ScalarwwpXcvrErrorType | read-only | current | Indicates if the Xcvr specified by the wwpXcvrPortId and wwpXcvrId is faulted because of checksum failed or optical fault. This object only make sense if some … |
| 1.3.6.1.4.1.6141.2.14.2 | NodewwpXcvrMIBNotificationPrefix | |||
| 1.3.6.1.4.1.6141.2.14.2.0 | NodewwpXcvrMIBNotifications | |||
| 1.3.6.1.4.1.6141.2.14.2.0.4 | NotificationwwpXcvrLinkStateChangeNotification | current | A wwpXcvrLinkStateChangeNotification is sent if the Xcvr state has changed. | |
| 1.3.6.1.4.1.6141.2.14.2.0.5 | NotificationwwpXcvrErrorTypeNotification | current | A wwpXcvrErrorTypeNotification is sent if the Xcvr is detected faulted because of some reason. Reason of failure is specifed by wwpXcvrErrorType. | |
| 1.3.6.1.4.1.6141.2.14.3 | NodewwpXcvrMIBConformance | |||
| 1.3.6.1.4.1.6141.2.14.3.1 | NodewwpXcvrMIBCompliances | |||
| 1.3.6.1.4.1.6141.2.14.3.2 | NodewwpXcvrMIBGroups |