Wellfleet-APPN-MIB
646 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.14.1 | NodewfAppnNode | |||
| 1.3.6.1.4.1.18.3.5.14.1.1 | NodewfAppnNodeInfoAndCaps | |||
| 1.3.6.1.4.1.18.3.5.14.1.1.1 | ScalarwfAppnNodeDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the APPN Node. |
| 1.3.6.1.4.1.18.3.5.14.1.1.2 | ScalarwfAppnNodeDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable the APPN Node. |
| 1.3.6.1.4.1.18.3.5.14.1.1.3 | ScalarwfAppnNodeState | read-only | mandatory | The current state of the APPN CP. |
| 1.3.6.1.4.1.18.3.5.14.1.1.4 | ScalarwfAppnNodeCpName | read-write | mandatory | Administratively-assigned network name for this node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.18.3.5.14.1.1.5 | ScalarwfAppnNodeNetid | read-only | mandatory | Administratively-assigned APPN network identification, which can be from one to eight characters. This ID is used with the control point name to create a fully… |
| 1.3.6.1.4.1.18.3.5.14.1.1.6 | ScalarwfAppnNodeBlockNum | read-write | mandatory | The block number is the first three digits of the node_id. These 3 hexadecimal digits identify the product. |
| 1.3.6.1.4.1.18.3.5.14.1.1.7 | ScalarwfAppnNodeIdNum | read-write | mandatory | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number from the … |
| 1.3.6.1.4.1.18.3.5.14.1.1.8 | ScalarwfAppnNodeType | read-only | mandatory | Type of APPN node, either Network Node, End Node, or Low Entry Networking Node. This node is always a Network Node. |
| 1.3.6.1.4.1.18.3.5.14.1.1.9 | ScalarwfAppnNodeUpTime | read-only | mandatory | Time (in hundredths of a second) since this APPN node was initialized. |
| 1.3.6.1.4.1.18.3.5.14.1.1.10 | ScalarwfAppnNodeNegotLs | read-only | mandatory | Indicates whether this node supports negotiable link stations. |
| 1.3.6.1.4.1.18.3.5.14.1.1.11 | ScalarwfAppnNodeSegReasm | read-only | mandatory | Indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported. |
| 1.3.6.1.4.1.18.3.5.14.1.1.12 | ScalarwfAppnNodeBindReasm | read-only | mandatory | Indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported. |
| 1.3.6.1.4.1.18.3.5.14.1.1.13 | ScalarwfAppnNodeParallelTg | read-only | mandatory | Indicates whether this node supports parallel TGs. |
| 1.3.6.1.4.1.18.3.5.14.1.1.14 | ScalarwfAppnNodeService | read-only | mandatory | Indicates whether this node allows call-in from nodes not defined locally. |
| 1.3.6.1.4.1.18.3.5.14.1.1.15 | ScalarwfAppnNodeAdaptiveBindPacing | read-only | mandatory | Indicates whether this node supports adaptive bind pacing. |
| 1.3.6.1.4.1.18.3.5.14.1.1.16 | ScalarwfAppnNodeNnRcvRegChar | read-only | mandatory | Indicates whether this node supports receiving registered characteristics. |
| 1.3.6.1.4.1.18.3.5.14.1.1.17 | ScalarwfAppnNodeNnGateway | read-only | mandatory | Indicates whether this is a gateway node. |
| 1.3.6.1.4.1.18.3.5.14.1.1.18 | ScalarwfAppnNodeNnCentralDirectory | read-only | mandatory | Indicates whether this node supports central directory cache. |
| 1.3.6.1.4.1.18.3.5.14.1.1.19 | ScalarwfAppnNodeNnTreeCache | read-only | mandatory | Indicates whether this node supports Route Tree caching. |
| 1.3.6.1.4.1.18.3.5.14.1.1.20 | ScalarwfAppnNodeNnTreeUpdate | read-only | mandatory | Indicates whether this node supports incremental_tree_update, which is only supported when tree caching is supported. |
| 1.3.6.1.4.1.18.3.5.14.1.1.21 | ScalarwfAppnNodeNnRouteAddResist | read-write | mandatory | Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any … |
| 1.3.6.1.4.1.18.3.5.14.1.1.22 | ScalarwfAppnNodeNnIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing. |
| 1.3.6.1.4.1.18.3.5.14.1.1.23 | ScalarwfAppnNodeNnFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.18.3.5.14.1.1.24 | ScalarwfAppnNodeModeToCosDisable | read-only | mandatory | Indicates whether Mode to Cos mapping is supported |
| 1.3.6.1.4.1.18.3.5.14.1.1.25 | ScalarwfAppnNodeMdsDisable | read-write | mandatory | Enables Multiple Domain Support |
| 1.3.6.1.4.1.18.3.5.14.1.1.26 | ScalarwfAppnNodeRegWithCdsDisable | read-write | mandatory | Enable Registration of Local and Domain resources with Central Directory Server |
| 1.3.6.1.4.1.18.3.5.14.1.1.27 | ScalarwfAppnNodeAlertQSize | read-write | mandatory | Size of the MDS Send Alert Queue Size |
| 1.3.6.1.4.1.18.3.5.14.1.1.28 | ScalarwfAppnNodeCosCacheSize | read-write | mandatory | Size of the COS Database weights cache This should be set to the number of COSs defined |
| 1.3.6.1.4.1.18.3.5.14.1.1.29 | ScalarwfAppnNodeStoreEndpointRscvsDisable | read-write | mandatory | Store RSCVs for Endpoint sessions? |
| 1.3.6.1.4.1.18.3.5.14.1.1.30 | ScalarwfAppnNodeNnMaxLocates | read-write | mandatory | Maximum simultaneous Locates that this node will process |
| 1.3.6.1.4.1.18.3.5.14.1.1.31 | ScalarwfAppnNodeNnDirCacheSize | read-write | mandatory | Maximum size (entry count) of the Directory Services cache. |
| 1.3.6.1.4.1.18.3.5.14.1.1.32 | ScalarwfAppnNodeNnMaxDirEntries | read-write | mandatory | Maximum Number of entries in Directory Database. A value of zero means unlimited |
| 1.3.6.1.4.1.18.3.5.14.1.1.33 | ScalarwfAppnNodeNnLocateTimeout | read-write | mandatory | Specifies a time (in seconds) before a network search will timeout. A value of zero means no timeout |
| 1.3.6.1.4.1.18.3.5.14.1.1.34 | ScalarwfAppnNodeNnTreeCacheSize | read-write | mandatory | Size of the Topology Database routing tree cache. |
| 1.3.6.1.4.1.18.3.5.14.1.1.35 | ScalarwfAppnNodeNnTreeCacheUseLimit | read-write | mandatory | Number of times a cached Routing Tree will be used before it is recalculated |
| 1.3.6.1.4.1.18.3.5.14.1.1.36 | ScalarwfAppnNodeNnMaxTdmNodes | read-write | mandatory | Maximum number of nodes in the topology database. A value of zero means unlimited |
| 1.3.6.1.4.1.18.3.5.14.1.1.37 | ScalarwfAppnNodeNnMaxTdmTgs | read-write | mandatory | Maximum number of TGs in the topology database. A value of zero means unlimited |
| 1.3.6.1.4.1.18.3.5.14.1.1.38 | ScalarwfAppnNodeNnMaxIsrSessions | read-write | mandatory | Maximum number of Intermediate Sessions that this node will route |
| 1.3.6.1.4.1.18.3.5.14.1.1.39 | ScalarwfAppnNodeNnIsrSessionUpperThresh | read-write | mandatory | ISR Session Threshold at which the node is considered congested. This value must be less than that of wfAppnNodeNnMaxIsrSessions |
| 1.3.6.1.4.1.18.3.5.14.1.1.40 | ScalarwfAppnNodeNnIsrSessionLowerThresh | read-write | mandatory | ISR Session Threshold at which the node is no longer considered congested. This value must be less than that of wfAppnNodeNnIsrSessionUpperThresh |
| 1.3.6.1.4.1.18.3.5.14.1.1.41 | ScalarwfAppnNodeNnIsrMaxRuSize | read-write | mandatory | Maximum RU size supported for intermediate sessions |
| 1.3.6.1.4.1.18.3.5.14.1.1.42 | ScalarwfAppnNodeNnIsrRcvPacingWindow | read-write | mandatory | Receive Pacing window for intermediate sessions |
| 1.3.6.1.4.1.18.3.5.14.1.1.43 | ScalarwfAppnNodeNnStoreIsrRscvsDisable | read-write | mandatory | Store RSCVs for intermediate sessions? (for network monitoring) |
| 1.3.6.1.4.1.18.3.5.14.1.1.44 | ScalarwfAppnNodeNnStoreDlurRscvsDisable | read-write | mandatory | Store RSCVs for DLUR sessions? (for network monitoring) |
| 1.3.6.1.4.1.18.3.5.14.1.1.45 | ScalarwfAppnNodeNnDlurDisable | read-write | mandatory | This enables DLUR support for the Node |
| 1.3.6.1.4.1.18.3.5.14.1.1.46 | ScalarwfAppnNodeTotalAvailableMemory | read-only | mandatory | Total memory available to APPN |
| 1.3.6.1.4.1.18.3.5.14.1.1.47 | ScalarwfAppnNodeInUseMemory | read-only | mandatory | Memory in use by APPN |
| 1.3.6.1.4.1.18.3.5.14.1.1.48 | ScalarwfAppnNodeMemoryWarningThreshold | read-only | mandatory | Warning memory threshold |
| 1.3.6.1.4.1.18.3.5.14.1.1.49 | ScalarwfAppnNodeMemoryCriticalThreshold | read-only | mandatory | Critical memory threshold |
| 1.3.6.1.4.1.18.3.5.14.1.1.50 | ScalarwfAppnNodeHprDisable | read-write | mandatory | This enables HPR support for the Node |
| 1.3.6.1.4.1.18.3.5.14.1.1.51 | ScalarwfAppnNodeHprPathSwitchCtrlrDisable | read-write | mandatory | This enables HPR Path Switch Controller support for the Node |
| 1.3.6.1.4.1.18.3.5.14.1.1.52 | ScalarwfAppnNodeDebugIpsTraceDisable | read-write | mandatory | This enables tracing of internal messages for debugging |
| 1.3.6.1.4.1.18.3.5.14.1.1.53 | ScalarwfAppnNodeDebugIpsTraceSize | read-write | mandatory | This specifies the size of the IPS trace file for debugging |
| 1.3.6.1.4.1.18.3.5.14.1.1.54 | ScalarwfAppnNodeDefaultDlusName | read-write | mandatory | Fully-qualified name of the default primary DLUS node. |
| 1.3.6.1.4.1.18.3.5.14.1.1.55 | ScalarwfAppnNodeDefaultBackupDlusName | read-write | mandatory | Fully-qualified name of the default backup DLUS node. |
| 1.3.6.1.4.1.18.3.5.14.1.1.56 | ScalarwfAppnNodePdLogDisable | read-write | mandatory | This enables logging of problem determination messages |
| 1.3.6.1.4.1.18.3.5.14.1.1.57 | ScalarwfAppnNodeDlusRetryTimeout | read-write | mandatory | This controls the timeout between retying pipe to the DLUS |
| 1.3.6.1.4.1.18.3.5.14.1.1.58 | ScalarwfAppnNodeDlusRetryLimit | read-write | mandatory | This controls the nubmer of retries for the pipe to the DLUS; 65535 means forever |
| 1.3.6.1.4.1.18.3.5.14.1.1.59 | ScalarwfAppnNodeSoloistSlotNum | read-only | mandatory | Indicates the slot which runs the appn_cp soloist |
| 1.3.6.1.4.1.18.3.5.14.1.1.60 | ScalarwfAppnNodeBrNNSupport | read-write | mandatory | Enables the BrNN support for this node. |
| 1.3.6.1.4.1.18.3.5.14.1.1.61 | ScalarwfAppnNodeRegisterWithNN | read-write | mandatory | Used for BrNN only. Indicates whether the resources will be registered with the NNS. When register_local is selected only local LUs ( not domain-served ) will … |
| 1.3.6.1.4.1.18.3.5.14.1.1.62 | ScalarwfAppnNodeBranchAwarenessEnable | read-write | mandatory | Indicates whether the TG between the local Node and served BrNNs will appear in the topology database |
| 1.3.6.1.4.1.18.3.5.14.1.2 | TablewfAppnNodeDlcTable | not-accessible | mandatory | this table contains entries for each DLC configured for APPN use |
| 1.3.6.1.4.1.18.3.5.14.1.2.1 | RowwfAppnNodeDlcEntry | not-accessible | mandatory | An entry in wfAppnNodeDlcTable. |
| 1.3.6.1.4.1.18.3.5.14.1.2.1.1 | ColumnwfAppnNodeDlcDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLC definition. |
| 1.3.6.1.4.1.18.3.5.14.1.2.1.2 | ColumnwfAppnNodeDlcDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this DLC. |
| 1.3.6.1.4.1.18.3.5.14.1.2.1.3 | ColumnwfAppnNodeDlcName | read-only | mandatory | This is the 8-character name given to this DLC |
| 1.3.6.1.4.1.18.3.5.14.1.2.1.4 | ColumnwfAppnNodeDlcState | read-only | mandatory | Indicates the current state of this DLC. |
| 1.3.6.1.4.1.18.3.5.14.1.2.1.5 | ColumnwfAppnNodeDlcType | read-write | mandatory | This indicates the type of DLC |
| 1.3.6.1.4.1.18.3.5.14.1.2.1.6 | ColumnwfAppnNodeDlcNegLsSupportDisable | read-write | mandatory | This indicates if Link Station roles can be negotiated on this DLC |
| 1.3.6.1.4.1.18.3.5.14.1.2.1.7 | ColumnwfAppnNodeDlcCct | read-write | mandatory | This is the circuit used by this DLC |
| 1.3.6.1.4.1.18.3.5.14.1.2.1.8 | ColumnwfAppnNodeDlcData | read-write | mandatory | comment - Is this used? -P2 |
| 1.3.6.1.4.1.18.3.5.14.1.3 | TablewfAppnNodePortTable | not-accessible | mandatory | this table contains entries for each Port defined |
| 1.3.6.1.4.1.18.3.5.14.1.3.1 | RowwfAppnNodePortEntry | not-accessible | mandatory | The Port Name is used as the index to this table. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.1 | ColumnwfAppnNodePortDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Port definition. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.2 | ColumnwfAppnNodePortDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Port. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.3 | ColumnwfAppnNodePortName | read-only | mandatory | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.4 | ColumnwfAppnNodePortState | read-only | mandatory | Indicates the current state of this port. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.5 | ColumnwfAppnNodePortDlcType | read-only | mandatory | Indicates the DLC type of this port. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.6 | ColumnwfAppnNodePortPortType | read-write | mandatory | Identifies the type of line used by this port. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.7 | ColumnwfAppnNodePortSIMRIM | read-only | mandatory | Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.8 | ColumnwfAppnNodePortLsRole | read-write | mandatory | Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.9 | ColumnwfAppnNodePortMaxRcvBtuSize | read-write | mandatory | Maximum Basic Transmission Size (BTU) that a link station on this port can receive. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.10 | ColumnwfAppnNodePortMaxIframeWindow | read-write | mandatory | Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.11 | ColumnwfAppnNodePortDefLsGoodXids | read-only | mandatory | The total number of successful XIDs that have occurred on all defined link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.12 | ColumnwfAppnNodePortDefLsBadXids | read-only | mandatory | The total number of unsuccessful XIDs that have occurred on all defined link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.13 | ColumnwfAppnNodePortDynLsGoodXids | read-only | mandatory | The total number of successful XIDs that have occurred on all dynamic link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.14 | ColumnwfAppnNodePortDynLsBadXids | read-only | mandatory | The total number of unsuccessful XIDs that have occurred on all dynamic link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.15 | ColumnwfAppnNodePortDlcName | read-write | mandatory | This is the 8-character name of the DLC which supports this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.16 | ColumnwfAppnNodePortNumber | read-write | mandatory | This is a unique number for this Port on the DLC |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.17 | ColumnwfAppnNodePortTotLinkActLim | read-write | mandatory | This specifies the maximum link activation limit for this Port. The maximum value depends on the LS Role and Port Type, as follows: Port Type LS Role Max Act L… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.18 | ColumnwfAppnNodePortInbLinkActLim | read-write | mandatory | This specifies the maximum inbound link activation limit for this Port. This value plus next one must total less than or equal to the total link activation lim… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.19 | ColumnwfAppnNodePortOutLinkActLim | read-write | mandatory | This specifies the maximum outbound link activation limit for this Port. This value plus previous one must total less than or equal to the total link activatio… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.20 | ColumnwfAppnNodePortActXidExchangeLimit | read-write | mandatory | This specifies the maximum number of activation XIDs which will be sent before the Port is considered inoperable |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.21 | ColumnwfAppnNodePortNonActXidExchangeLimit | read-write | mandatory | This specifies the maximum number of non-activation XIDs which will be sent before the Port is considered inoperable |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.22 | ColumnwfAppnNodePortLsXmitRcvCap | read-write | mandatory | This specifies if the Port can receive Two-Way Simultaneous or Two-Way Alternate |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.23 | ColumnwfAppnNodePortTargetPacingCount | read-write | mandatory | This specifies the target pacing count for BINDs on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.24 | ColumnwfAppnNodePortMaxSendBtuSize | read-write | mandatory | This specifies the Maximum BTU Size which can be sent out this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.25 | ColumnwfAppnNodePortImplicitCpSessions | read-write | mandatory | This specifies whether CP-CP sessions are permitted with implicit link stations on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.26 | ColumnwfAppnNodePortImplicitLimResource | read-write | mandatory | This specifies whether implicit link stations on this Port should be defined as limited resources |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.27 | ColumnwfAppnNodePortImplicitEffCap | read-write | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.28 | ColumnwfAppnNodePortImplicitConnCost | read-write | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.29 | ColumnwfAppnNodePortImplicitByteCost | read-write | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value for use with TGs to impli… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.30 | ColumnwfAppnNodePortImplicitSecurity | read-write | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.31 | ColumnwfAppnNodePortImplicitDelay | read-write | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value for use with TGs to imp… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.32 | ColumnwfAppnNodePortImplicitUsr1 | read-write | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with TGs to implicit link stations o… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.33 | ColumnwfAppnNodePortImplicitUsr2 | read-write | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with TGs to implicit link stations … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.34 | ColumnwfAppnNodePortImplicitUsr3 | read-write | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with TGs to implicit link stations o… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.35 | ColumnwfAppnNodePortImplicitHprDisable | read-write | mandatory | This specifies if HPR can be used with implicit link stations on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.36 | ColumnwfAppnNodePortImplicitHprLlErrorDisable | read-write | mandatory | This specifies if Link-Level Error recovery is to be used on implicit link stations which support HPR on this Port. NOTE: This field does not enable/disable HP… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.37 | ColumnwfAppnNodePortImplicitLinkDeactTime | read-write | mandatory | This indicates the time in seconds before implicit Link Stations on this Port will be deactivated if it is an HPR limited Resource. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.38 | ColumnwfAppnNodePortDlcData | read-write | mandatory | This specifies the local DLC address to be used by this port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.39 | ColumnwfAppnNodePortHprDlcData | read-write | mandatory | This specifies the HPR address to be used by this port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.40 | ColumnwfAppnNodePortImplicitDlurDisable | read-write | mandatory | This specifies if HPR can be used with implicit link stations on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.41 | ColumnwfAppnNodePortImplicitUplinkToEN | read-write | mandatory | For BrNN specifies whether the implicit Link Stations off this port are uplink or downlink if the adjacent node is an EN. |
| 1.3.6.1.4.1.18.3.5.14.1.4 | TablewfAppnNodeLsTable | not-accessible | mandatory | This table contains detail information about link station configuration |
| 1.3.6.1.4.1.18.3.5.14.1.4.1 | RowwfAppnNodeLsEntry | not-accessible | mandatory | An entry in wfAppnNodePortTable. This table is indexed by the link station name |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.1 | ColumnwfAppnNodeLsDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Link Station definition. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.2 | ColumnwfAppnNodeLsDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.3 | ColumnwfAppnNodeLsName | read-only | mandatory | Administratively-assigned name for the link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.4 | ColumnwfAppnNodeLsPortName | read-write | mandatory | Administratively-assigned name for the port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.5 | ColumnwfAppnNodeLsState | read-only | mandatory | State of this link station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.6 | ColumnwfAppnNodeLsCpName | read-write | mandatory | Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.7 | ColumnwfAppnNodeLsTgNum | read-write | mandatory | Number associated with the TG to this link station. Range ( 1 - 20) Predefined values for auto-activation |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.8 | ColumnwfAppnNodeLsLimResource | read-write | mandatory | Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.9 | ColumnwfAppnNodeLsMigration | read-write | mandatory | Indicates whether this link station will be used for connections to down-level or migration partners. 1 Indicates that this is a back-level node supporting XID… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.10 | ColumnwfAppnNodeLsBlockNum | read-write | mandatory | The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.11 | ColumnwfAppnNodeLsIdNum | read-write | mandatory | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the … |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.12 | ColumnwfAppnNodeLsCpCpSession | read-write | mandatory | Indicates whether CP-CP sessions are supported by this link station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.13 | ColumnwfAppnNodeLsTargetPacingCount | read-write | mandatory | Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind paci… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.14 | ColumnwfAppnNodeLsMaxSendBtuSize | read-write | mandatory | Numeric value between 0 and 4105 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an ad… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.15 | ColumnwfAppnNodeLsEffCap | read-write | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.16 | ColumnwfAppnNodeLsConnCost | read-write | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.17 | ColumnwfAppnNodeLsByteCost | read-write | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG us… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.18 | ColumnwfAppnNodeLsSecurity | read-write | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.19 | ColumnwfAppnNodeLsDelay | read-write | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with the TG … |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.20 | ColumnwfAppnNodeLsUsr1 | read-write | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stati… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.21 | ColumnwfAppnNodeLsUsr2 | read-write | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stat… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.22 | ColumnwfAppnNodeLsUsr3 | read-write | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stati… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.23 | ColumnwfAppnNodeLsCpType | read-write | mandatory | This specifies the APPN Node type of Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.24 | ColumnwfAppnNodeLsAutoActivateDisable | read-write | mandatory | This specifies if the link should be automatically activated when the Port becomes active. Should be disabled if CP-CP sessions are enabled. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.25 | ColumnwfAppnNodeLsSolicitSscpSessionsDisable | read-write | mandatory | This specifies if SSCP Sessions should be solicited from this Link Station |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.26 | ColumnwfAppnNodeLsUseDefaultTgChars | read-write | mandatory | Indicates whether the default TG characteristics specified for the Port should be used for this link station, or if explicit TG characteristics will be supplie… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.27 | ColumnwfAppnNodeLsLinkData | read-write | mandatory | this for Link Address (MAC/SAP, SDLC Address) |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.28 | ColumnwfAppnNodeLsDlurDisable | read-write | mandatory | This specifies if the adjacent Link Station is a node to be serviced by DLUR. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.29 | ColumnwfAppnNodeLsDspuName | read-write | mandatory | 8-byte name of the downstream PU supported by DLUR. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.30 | ColumnwfAppnNodeLsDlusName | read-write | mandatory | Fully-qualified name of the DLUS node which will serve this DLUR Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.31 | ColumnwfAppnNodeLsBackupDlusName | read-write | mandatory | Fully-qualified name of the backup DLUS node which may serve this DLUR Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.32 | ColumnwfAppnNodeLsHprDisable | read-write | mandatory | This specifies if HPR is supported on this Link Station |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.33 | ColumnwfAppnNodeLsHprLlErrorDisable | read-write | mandatory | This specifies if Link-Level Error recovery is to be used on this link station. NOTE: This field does not enable/disable HPRs selective retransmission algorith… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.34 | ColumnwfAppnNodeLsLinkDeactTime | read-write | mandatory | This indicates the time in seconds before this Link Station will be deactivated if it is an HPR limited Resource. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.35 | ColumnwfAppnNodeLsLinkRetryCount | read-write | mandatory | This indicates for how many times will APPN CP component retry to restart the link station before it gives up, 99 default is forever. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.36 | ColumnwfAppnNodeLsBranchLinkType | read-write | mandatory | For BrNN specifies whether the link is an uplink or a downlink |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.37 | ColumnwfAppnNodeLsAdjBrNNLinkSupp | read-write | mandatory | Specifies whether the adjacent node is required, allowed or prohibited from being a BrNN ( i.e. an BrNN showing its NN face ). |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.38 | ColumnwfAppnNodeLsDefaultNNS | read-write | mandatory | This field can be set to yes to indicate that the adjacent CP is the preferred NN server |
| 1.3.6.1.4.1.18.3.5.14.1.5 | TablewfAppnNodeLsStatusTable | not-accessible | mandatory | This table contains detailed status information about link stations |
| 1.3.6.1.4.1.18.3.5.14.1.5.1 | RowwfAppnNodeLsStatusEntry | not-accessible | mandatory | An entry in wfAppnNodeLsStatusTable. This table is indexed by the link station name |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.1 | ColumnwfAppnNodeLsStatusName | read-only | mandatory | Administratively-assigned name for the link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.2 | ColumnwfAppnNodeLsStatusPortName | read-only | mandatory | Administratively-assigned name for the port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.3 | ColumnwfAppnNodeLsStatusDlcType | read-only | mandatory | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.4 | ColumnwfAppnNodeLsStatusDynamic | read-only | mandatory | Identifies whether this resource is a dynamic link station. Dynamic link stations are created when adjacent nodes that have not been locally defined establish … |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.5 | ColumnwfAppnNodeLsStatusState | read-only | mandatory | State of this link station. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.6 | ColumnwfAppnNodeLsStatusCpName | read-only | mandatory | Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.7 | ColumnwfAppnNodeLsStatusTgNum | read-only | mandatory | Number associated with the TG to this link station. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.8 | ColumnwfAppnNodeLsStatusLimResource | read-only | mandatory | Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.9 | ColumnwfAppnNodeLsStatusMigration | read-only | mandatory | Indicates whether this link station will be used for connections to down-level or migration partners. 1 Indicates that this is a back-level node supporting XID… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.10 | ColumnwfAppnNodeLsStatusBlockNum | read-only | mandatory | The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.11 | ColumnwfAppnNodeLsStatusIdNum | read-only | mandatory | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the … |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.12 | ColumnwfAppnNodeLsStatusCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported by this link station. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.13 | ColumnwfAppnNodeLsStatusTargetPacingCount | read-only | mandatory | Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind paci… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.14 | ColumnwfAppnNodeLsStatusMaxSendBtuSize | read-only | mandatory | Numeric value between 0 and 32767 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an a… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.15 | ColumnwfAppnNodeLsStatusEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.16 | ColumnwfAppnNodeLsStatusConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.17 | ColumnwfAppnNodeLsStatusByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG us… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.18 | ColumnwfAppnNodeLsStatusSecurity | read-only | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.19 | ColumnwfAppnNodeLsStatusDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with the TG … |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.20 | ColumnwfAppnNodeLsStatusUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stati… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.21 | ColumnwfAppnNodeLsStatusUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stat… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.22 | ColumnwfAppnNodeLsStatusUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stati… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.23 | ColumnwfAppnNodeLsStatusInXidBytes | read-only | mandatory | Number of XID bytes received. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.24 | ColumnwfAppnNodeLsStatusInMsgBytes | read-only | mandatory | Number of message (I-frame) bytes received. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.25 | ColumnwfAppnNodeLsStatusInXidFrames | read-only | mandatory | Number of XID frames received. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.26 | ColumnwfAppnNodeLsStatusInMsgFrames | read-only | mandatory | Number of message (I-frame) frames received. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.27 | ColumnwfAppnNodeLsStatusOutXidBytes | read-only | mandatory | Number of XID bytes sent. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.28 | ColumnwfAppnNodeLsStatusOutMsgBytes | read-only | mandatory | Number of message (I-frame) bytes sent. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.29 | ColumnwfAppnNodeLsStatusOutXidFrames | read-only | mandatory | Number of XID frames sent. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.30 | ColumnwfAppnNodeLsStatusOutMsgFrames | read-only | mandatory | Number of message (I-frame) frames sent. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.31 | ColumnwfAppnNodeLsStatusEchoRsps | read-only | mandatory | Number of responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adjacent … |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.32 | ColumnwfAppnNodeLsStatusCurrentDelay | read-only | mandatory | The time that it took for the last test signal to be sent and returned from this link station to the adjacent links station. This time is represented in millis… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.33 | ColumnwfAppnNodeLsStatusMaxDelay | read-only | mandatory | The longest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in millisecon… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.34 | ColumnwfAppnNodeLsStatusMinDelay | read-only | mandatory | The shortest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseco… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.35 | ColumnwfAppnNodeLsStatusMaxDelayTime | read-only | mandatory | The time (since system up in hundredth of seconds) when the longest delay occurred. This time can be used to identify when this high water mark occurred in rel… |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.36 | ColumnwfAppnNodeLsStatusGoodXids | read-only | mandatory | The total number of successful XIDs that have occurred on this link station since the time it was started. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.37 | ColumnwfAppnNodeLsStatusBadXids | read-only | mandatory | The total number of unsuccessful XIDs that have occurred on this link station since the time it was started. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.38 | ColumnwfAppnNodeLsStatusActiveSessions | read-only | mandatory | Number of Active Sessions (Endpoint and ISR) using this Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.39 | ColumnwfAppnNodeLsStatusInvalidSnaFrames | read-only | mandatory | Number of Invalid SNA Frames received from this Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.40 | ColumnwfAppnNodeLsStatusInScFrames | read-only | mandatory | Number of Session Control frames received from this Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.41 | ColumnwfAppnNodeLsStatusOutScFrames | read-only | mandatory | Number of Session Control frames sent to the Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.42 | ColumnwfAppnNodeLsStatusCpType | read-only | mandatory | This specifies the APPN Node type of Link Station |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.43 | ColumnwfAppnNodeLsStatusStartTime | read-only | mandatory | Time since system startup (in hundreths of seconds) when Link Station was activated. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.44 | ColumnwfAppnNodeLsStatusStopTime | read-only | mandatory | Time since system startup (in hundreths of seconds) when Link Station was deactivated. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.45 | ColumnwfAppnNodeLsStatusUpTime | read-only | mandatory | Time (in hundreths of seconds) that this Link Station has been up. |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.46 | ColumnwfAppnNodeLsStatusDeactCause | read-only | mandatory | Deactivation Cause |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.47 | ColumnwfAppnNodeLsStatusHprSupport | read-only | mandatory | Indicates if HPR is supported by this Link Station |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.48 | ColumnwfAppnNodeLsStatusHprLlErrSupport | read-only | mandatory | Indicates if HPR Link-level Error recovery is supported by this Link Station |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.49 | ColumnwfAppnNodeLsStatusAnrLabel | read-only | mandatory | ANR Label of this Link Station |
| 1.3.6.1.4.1.18.3.5.14.1.5.1.50 | ColumnwfAppnNodeLsStatusLinkData | read-only | mandatory | Link Address, e.g.Mac Address/SAP |
| 1.3.6.1.4.1.18.3.5.14.1.6 | TablewfAppnNodeCnTable | not-accessible | mandatory | This Table contains entries for each configured Connection Network |
| 1.3.6.1.4.1.18.3.5.14.1.6.1 | RowwfAppnNodeCnEntry | not-accessible | mandatory | An entry in wfAppnNodeCnTable. |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.1 | ColumnwfAppnNodeCnDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Connection Network definition. |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.2 | ColumnwfAppnNodeCnDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Connection Network. |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.3 | ColumnwfAppnNodeCnFqName | read-only | mandatory | The Fully-qualified name of the Connection Network |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.4 | ColumnwfAppnNodeCnState | read-only | mandatory | State of this connection network. |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.5 | ColumnwfAppnNodeCnEffCap | read-write | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.6 | ColumnwfAppnNodeCnConnCost | read-write | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.7 | ColumnwfAppnNodeCnByteCost | read-write | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG us… |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.8 | ColumnwfAppnNodeCnSecurity | read-write | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.9 | ColumnwfAppnNodeCnDelay | read-write | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with this co… |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.10 | ColumnwfAppnNodeCnUsr1 | read-write | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stati… |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.11 | ColumnwfAppnNodeCnUsr2 | read-write | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stat… |
| 1.3.6.1.4.1.18.3.5.14.1.6.1.12 | ColumnwfAppnNodeCnUsr3 | read-write | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stati… |
| 1.3.6.1.4.1.18.3.5.14.1.7 | TablewfAppnNodeCnPortTable | not-accessible | mandatory | Table containing an entry for every Port associated with a connection network. |
| 1.3.6.1.4.1.18.3.5.14.1.7.1 | RowwfAppnNodeCnPortEntry | not-accessible | mandatory | an entry in wfAppnNodeCnPortTable |
| 1.3.6.1.4.1.18.3.5.14.1.7.1.1 | ColumnwfAppnNodeCnPortDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Connection Network Port instance. |
| 1.3.6.1.4.1.18.3.5.14.1.7.1.2 | ColumnwfAppnNodeCnPortDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Connection Network Port. |
| 1.3.6.1.4.1.18.3.5.14.1.7.1.3 | ColumnwfAppnNodeCnPortCnName | read-only | mandatory | The name of the cn. |
| 1.3.6.1.4.1.18.3.5.14.1.7.1.4 | ColumnwfAppnNodeCnPortPortName | read-write | mandatory | The name of the port. FIX to READ_ONLY |
| 1.3.6.1.4.1.18.3.5.14.1.7.1.5 | ColumnwfAppnNodeCnPortState | read-only | mandatory | State of this connection network. |
| 1.3.6.1.4.1.18.3.5.14.1.8 | TablewfAppnNodeIsrSessionTable | not-accessible | mandatory | This table contains entries for every session that is currently being routed by this Node |
| 1.3.6.1.4.1.18.3.5.14.1.8.1 | RowwfAppnNodeIsrSessionEntry | not-accessible | mandatory | The fqpcid is the index for this table. |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.1 | ColumnwfAppnNodeIsrSessionPcid | read-only | mandatory | This is the PCID of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.2 | ColumnwfAppnNodeIsrSessionFqCpName | read-only | mandatory | This is the Fully-qualified CP name of the node assigning the PCID for this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.3 | ColumnwfAppnNodeIsrSessionTransPriority | read-only | mandatory | This indicates the transmission priority being used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.4 | ColumnwfAppnNodeIsrSessionCos | read-only | mandatory | This indicates the Class-of-Service being used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.5 | ColumnwfAppnNodeIsrSessionLimResource | read-only | mandatory | This indicates if this session is traversing a Limited Resource |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.6 | ColumnwfAppnNodeIsrSessionRscv | read-only | mandatory | This is the Route Selection Control Vector in use by this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.7 | ColumnwfAppnNodeIsrSessionPriSendRuSize | read-only | mandatory | This is the send RU size used on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.8 | ColumnwfAppnNodeIsrSessionPriRcvRuSize | read-only | mandatory | This is the receive RU size used on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.9 | ColumnwfAppnNodeIsrSessionPriMaxSendBtuSize | read-only | mandatory | This is the maximum send BTU size on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.10 | ColumnwfAppnNodeIsrSessionPriMaxRcvBtuSize | read-only | mandatory | This is the maximum receive BTU size on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.11 | ColumnwfAppnNodeIsrSessionPriMaxSendPacing | read-only | mandatory | This is the maximum send pacing on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.12 | ColumnwfAppnNodeIsrSessionPriCurSendPacing | read-only | mandatory | This is the current send pacing on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.13 | ColumnwfAppnNodeIsrSessionPriMaxRcvPacing | read-only | mandatory | This is the maximum receive pacing on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.14 | ColumnwfAppnNodeIsrSessionPriCurRcvPacing | read-only | mandatory | This is the current receive pacing on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.15 | ColumnwfAppnNodeIsrSessionPriSendFrames | read-only | mandatory | This is the number of Normal-flow frames sent on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.16 | ColumnwfAppnNodeIsrSessionPriSendBytes | read-only | mandatory | This is the number of bytes sent on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.17 | ColumnwfAppnNodeIsrSessionPriSendFmdFrames | read-only | mandatory | This is the number of FMD frames sent on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.18 | ColumnwfAppnNodeIsrSessionPriRcvFrames | read-only | mandatory | This is the number of Normal-flow frames received on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.19 | ColumnwfAppnNodeIsrSessionPriRcvBytes | read-only | mandatory | This is the number of bytes received on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.20 | ColumnwfAppnNodeIsrSessionPriRcvFmdFrames | read-only | mandatory | This is the number of FMD frames received on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.21 | ColumnwfAppnNodeIsrSessionPriSidh | read-only | mandatory | This is the SIDH value used on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.22 | ColumnwfAppnNodeIsrSessionPriSidl | read-only | mandatory | This is the SIDL value used on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.23 | ColumnwfAppnNodeIsrSessionPriOdai | read-only | mandatory | This is the ODAI value used on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.24 | ColumnwfAppnNodeIsrSessionPriLsName | read-only | mandatory | This is the adjacent Link Station used on the primary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.25 | ColumnwfAppnNodeIsrSessionSecSendRuSize | read-only | mandatory | This is the send RU size used on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.26 | ColumnwfAppnNodeIsrSessionSecRcvRuSize | read-only | mandatory | This is the receive RU size used on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.27 | ColumnwfAppnNodeIsrSessionSecMaxSendBtuSize | read-only | mandatory | This is the maximum send BTU size on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.28 | ColumnwfAppnNodeIsrSessionSecMaxRcvBtuSize | read-only | mandatory | This is the maximum receive BTU size on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.29 | ColumnwfAppnNodeIsrSessionSecMaxSendPacing | read-only | mandatory | This is the maximum send pacing on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.30 | ColumnwfAppnNodeIsrSessionSecCurSendPacing | read-only | mandatory | This is the current send pacing on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.31 | ColumnwfAppnNodeIsrSessionSecMaxRcvPacing | read-only | mandatory | This is the maximum receive pacing on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.32 | ColumnwfAppnNodeIsrSessionSecCurRcvPacing | read-only | mandatory | This is the current receive pacing on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.33 | ColumnwfAppnNodeIsrSessionSecSendFrames | read-only | mandatory | This is the number of Normal-flow frames sent on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.34 | ColumnwfAppnNodeIsrSessionSecSendBytes | read-only | mandatory | This is the number of bytes sent on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.35 | ColumnwfAppnNodeIsrSessionSecSendFmdFrames | read-only | mandatory | This is the number of FMD frames sent on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.36 | ColumnwfAppnNodeIsrSessionSecRcvFrames | read-only | mandatory | This is the number of Normal-flow frames received on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.37 | ColumnwfAppnNodeIsrSessionSecRcvBytes | read-only | mandatory | This is the number of bytes received on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.38 | ColumnwfAppnNodeIsrSessionSecRcvFmdFrames | read-only | mandatory | This is the number of FMD frames received on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.39 | ColumnwfAppnNodeIsrSessionSecSidh | read-only | mandatory | This is the SIDH value used on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.40 | ColumnwfAppnNodeIsrSessionSecSidl | read-only | mandatory | This is the SIDL value used on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.41 | ColumnwfAppnNodeIsrSessionSecOdai | read-only | mandatory | This is the ODAI value used on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.42 | ColumnwfAppnNodeIsrSessionSecLsName | read-only | mandatory | This is the adjacent Link Station used on the secondary hop of this session |
| 1.3.6.1.4.1.18.3.5.14.1.8.1.43 | ColumnwfAppnNodeIsrSessionRscvText | read-only | mandatory | This is the Route Selection Control Vector in use by this session, in a DSP_STR format |
| 1.3.6.1.4.1.18.3.5.14.1.9 | TablewfAppnNodeEndptSessionTable | not-accessible | mandatory | This table contains entries for every endpoint session that is currently active on this Node |
| 1.3.6.1.4.1.18.3.5.14.1.9.1 | RowwfAppnNodeEndptSessionEntry | not-accessible | mandatory | The fqpcid is the index for this table. |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.1 | ColumnwfAppnNodeEndptSessionId | read-only | mandatory | This is the session ID of this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.2 | ColumnwfAppnNodeEndptSessionPcid | read-only | mandatory | This is the PCID of this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.3 | ColumnwfAppnNodeEndptSessionFqCpName | read-only | mandatory | This is the Fully-qualified CP name of the node assigning the PCID for this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.4 | ColumnwfAppnNodeEndptSessionFqPluName | read-only | mandatory | This is the name of the Partner LU being used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.5 | ColumnwfAppnNodeEndptSessionTransPriority | read-only | mandatory | This indicates the transmission priority being used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.6 | ColumnwfAppnNodeEndptSessionMode | read-only | mandatory | This indicates the Mode being used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.7 | ColumnwfAppnNodeEndptSessionCos | read-only | mandatory | This indicates the Class-of-Service being used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.8 | ColumnwfAppnNodeEndptSessionLimResource | read-only | mandatory | This indicates if this session is traversing a Limited Resource |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.9 | ColumnwfAppnNodeEndptSessionPolarity | read-only | mandatory | This indicates whether the local LU was the BIND sender (Primary) or if the local LU was the BIND receiver (Secondary) |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.10 | ColumnwfAppnNodeEndptSessionContention | read-only | mandatory | This indicates whether this session is a contention-winner or a contention-loser session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.11 | ColumnwfAppnNodeEndptSessionRscv | read-only | mandatory | This is the Route Selection Control Vector in use by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.12 | ColumnwfAppnNodeEndptSessionSendRuSize | read-only | mandatory | This is the maximum RU size sent on this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.13 | ColumnwfAppnNodeEndptSessionRcvRuSize | read-only | mandatory | This is the maximum RU size received this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.14 | ColumnwfAppnNodeEndptSessionMaxSendBtuSize | read-only | mandatory | This is the maximum send BTU size for this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.15 | ColumnwfAppnNodeEndptSessionMaxRcvBtuSize | read-only | mandatory | This is the maximum receive BTU size for this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.16 | ColumnwfAppnNodeEndptSessionMaxSendPacing | read-only | mandatory | This is the maximum send pacing for this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.17 | ColumnwfAppnNodeEndptSessionCurSendPacing | read-only | mandatory | This is the current send pacing used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.18 | ColumnwfAppnNodeEndptSessionMaxRcvPacing | read-only | mandatory | This is the maximum receive pacing for this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.19 | ColumnwfAppnNodeEndptSessionCurRcvPacing | read-only | mandatory | This is the current receive pacing used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.20 | ColumnwfAppnNodeEndptSessionSendFrames | read-only | mandatory | This is the number of data frames sent by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.21 | ColumnwfAppnNodeEndptSessionSendBytes | read-only | mandatory | This is the number of data bytes sent by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.22 | ColumnwfAppnNodeEndptSessionSendFmdFrames | read-only | mandatory | This is the number of FMD frames sent by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.23 | ColumnwfAppnNodeEndptSessionRcvFrames | read-only | mandatory | This is the number of data frames received by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.24 | ColumnwfAppnNodeEndptSessionRcvBytes | read-only | mandatory | This is the number of bytes received by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.25 | ColumnwfAppnNodeEndptSessionRcvFmdFrames | read-only | mandatory | This is the number of FMD frames received by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.26 | ColumnwfAppnNodeEndptSessionSidh | read-only | mandatory | This is the number of bytes received by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.27 | ColumnwfAppnNodeEndptSessionSidl | read-only | mandatory | This is the SIDL value used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.28 | ColumnwfAppnNodeEndptSessionOdai | read-only | mandatory | This is the ODAI value used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.29 | ColumnwfAppnNodeEndptSessionLsName | read-only | mandatory | This is the adjacent Link Station used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.9.1.30 | ColumnwfAppnNodeEndptSessionRscvText | read-only | mandatory | This is a text string representing the RSCV used by this session |
| 1.3.6.1.4.1.18.3.5.14.1.10 | NodewfAppnNodeTraceGroup | |||
| 1.3.6.1.4.1.18.3.5.14.1.10.1 | ScalarwfAppnNodeTraceDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Trace. |
| 1.3.6.1.4.1.18.3.5.14.1.10.2 | ScalarwfAppnNodeTraceDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Trace. |
| 1.3.6.1.4.1.18.3.5.14.1.10.3 | ScalarwfAppnNodeTraceFile | read-write | mandatory | This is the path and file name for the Trace file to be created |
| 1.3.6.1.4.1.18.3.5.14.1.11 | TablewfAppnNodeRtpConnectionTable | not-accessible | mandatory | This table contains entries for every RTP connection that is currently active on this Node |
| 1.3.6.1.4.1.18.3.5.14.1.11.1 | RowwfAppnNodeRtpConnectionEntry | not-accessible | mandatory | The fqpcid is the index for this table. |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.1 | ColumnwfAppnNodeRtpConnectionName | read-only | mandatory | This is the local name of the RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.2 | ColumnwfAppnNodeRtpConnectionDestName | read-only | mandatory | This is the fully-qualified name of the node at the other end of this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.3 | ColumnwfAppnNodeRtpConnectionFirstHopLsName | read-only | mandatory | This is the LS name of the first hop for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.4 | ColumnwfAppnNodeRtpConnectionCosName | read-only | mandatory | This is the Class-of-Service name for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.5 | ColumnwfAppnNodeRtpConnectionMaxBtuSize | read-only | mandatory | This is the maximum size (in bytes) of packets which can be carried by this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.6 | ColumnwfAppnNodeRtpConnectionLivenessTimer | read-only | mandatory | This is the Liveness Timer (in seconds) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.7 | ColumnwfAppnNodeRtpConnectionLivenessTimeouts | read-only | mandatory | This is the number Liveness Timeouts for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.8 | ColumnwfAppnNodeRtpConnectionLocalTcid | read-only | mandatory | This is the Local TCID for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.9 | ColumnwfAppnNodeRtpConnectionRemoteTcid | read-only | mandatory | This is the remote TCID for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.10 | ColumnwfAppnNodeRtpConnectionActiveSessions | read-only | mandatory | This is the number of sessions currently active on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.11 | ColumnwfAppnNodeRtpConnectionSendBytes | read-only | mandatory | This is the number of bytes that have been sent on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.12 | ColumnwfAppnNodeRtpConnectionSendPackets | read-only | mandatory | This is the number of packets that have been sent on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.13 | ColumnwfAppnNodeRtpConnectionSendSessionControlFrames | read-only | mandatory | This is the number of Session Control that have been sent on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.14 | ColumnwfAppnNodeRtpConnectionSendRate | read-only | mandatory | This is the current sending rate (in Kbits per second) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.15 | ColumnwfAppnNodeRtpConnectionMaxSendRate | read-only | mandatory | This is the Maximum sending rate (in Kbits per second) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.16 | ColumnwfAppnNodeRtpConnectionMinSendRate | read-only | mandatory | This is the Minimum sending rate (in Kbits per second) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.17 | ColumnwfAppnNodeRtpConnectionRcvBytes | read-only | mandatory | This is the number of bytes that have been received on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.18 | ColumnwfAppnNodeRtpConnectionRcvPackets | read-only | mandatory | This is the number of packets that have been received on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.19 | ColumnwfAppnNodeRtpConnectionRcvSessionControlFrames | read-only | mandatory | This is the number of Session Control that have been received on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.20 | ColumnwfAppnNodeRtpConnectionRcvInvalidSnaFrames | read-only | mandatory | This is the number of invalid SNA frames that have been received on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.21 | ColumnwfAppnNodeRtpConnectionRcvRate | read-only | mandatory | This is the current receiving rate (in Kbits per second) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.22 | ColumnwfAppnNodeRtpConnectionMaxRcvRate | read-only | mandatory | This is the Maximum receive rate (in Kbits per second) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.23 | ColumnwfAppnNodeRtpConnectionMinRcvRate | read-only | mandatory | This is the Minimum receive rate (in Kbits per second) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.24 | ColumnwfAppnNodeRtpConnectionDiscardedBytes | read-only | mandatory | This is the number of bytes that have been discarded on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.25 | ColumnwfAppnNodeRtpConnectionDiscardedPackets | read-only | mandatory | This is the number of packets that have been discarded on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.26 | ColumnwfAppnNodeRtpConnectionResentBytes | read-only | mandatory | This is the number of bytes that have been retransmitted this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.27 | ColumnwfAppnNodeRtpConnectionResentPackets | read-only | mandatory | This is the number of packets that have been retransmitted this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.28 | ColumnwfAppnNodeRtpConnectionUpTime | read-only | mandatory | This is the time (in seconds) that this RTP connection has been active |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.29 | ColumnwfAppnNodeRtpConnectionRoundTripTime | read-only | mandatory | This is the last round-trip time (in milliseconds) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.30 | ColumnwfAppnNodeRtpConnectionSmoothRoundTripTime | read-only | mandatory | This is the smoothed round-trip time (in milliseconds) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.31 | ColumnwfAppnNodeRtpConnectionBurstSize | read-only | mandatory | This is the current burst size for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.32 | ColumnwfAppnNodeRtpConnectionSrtExpiries | read-only | mandatory | This is the number of times the SR Timer has expired on this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.33 | ColumnwfAppnNodeRtpConnectionShortReqTimer | read-only | mandatory | This is the SHORT_REQ timer duration (in seconds) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.34 | ColumnwfAppnNodeRtpConnectionGapsDetected | read-only | mandatory | This is the number of gaps detected for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.35 | ColumnwfAppnNodeRtpConnectionRscv | read-only | mandatory | This is the RSCV (in hex) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.1.11.1.36 | ColumnwfAppnNodeRtpConnectionRscvText | read-only | mandatory | This is the RSCV (in a human-readable format) for this RTP connection |
| 1.3.6.1.4.1.18.3.5.14.2 | NodewfAppnNn | |||
| 1.3.6.1.4.1.18.3.5.14.2.1 | NodewfAppnNnTopo | |||
| 1.3.6.1.4.1.18.3.5.14.2.1.1 | ScalarwfAppnNnTopoMaxNodes | read-only | mandatory | Maximum number of nodes allowed in the APPN topology database This administratively assigned value must be equal to or greater than the maximum total number of… |
| 1.3.6.1.4.1.18.3.5.14.2.1.2 | ScalarwfAppnNnTopoCurNumNodes | read-only | mandatory | Current number of nodes in this node's topology database. If this value exceeds the maximum number of nodes allowed (NnTopoMaxNodes), APPN alert CPDB002 is iss… |
| 1.3.6.1.4.1.18.3.5.14.2.1.3 | ScalarwfAppnNnTopoInTdus | read-only | mandatory | Total number of TDUs received from all adjacent NN since last initialization. |
| 1.3.6.1.4.1.18.3.5.14.2.1.4 | ScalarwfAppnNnTopoOutTdus | read-only | mandatory | Total number of TDUs built by this node to be sent to all adjacent NN since last initialization. |
| 1.3.6.1.4.1.18.3.5.14.2.1.5 | ScalarwfAppnNnTopoNodeLowRsns | read-only | mandatory | Total number of topology node updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs … |
| 1.3.6.1.4.1.18.3.5.14.2.1.6 | ScalarwfAppnNnTopoNodeEqualRsns | read-only | mandatory | Total number of topology node updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs a… |
| 1.3.6.1.4.1.18.3.5.14.2.1.7 | ScalarwfAppnNnTopoNodeGoodHighRsns | read-only | mandatory | Total number of topology node updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcast… |
| 1.3.6.1.4.1.18.3.5.14.2.1.8 | ScalarwfAppnNnTopoNodeBadHighRsns | read-only | mandatory | Total number of topology node updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency dete… |
| 1.3.6.1.4.1.18.3.5.14.2.1.9 | ScalarwfAppnNnTopoNodeStateUpdates | read-only | mandatory | Total number of topology Node records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via T… |
| 1.3.6.1.4.1.18.3.5.14.2.1.10 | ScalarwfAppnNnTopoNodeErrors | read-only | mandatory | Total number of topology node records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a … |
| 1.3.6.1.4.1.18.3.5.14.2.1.11 | ScalarwfAppnNnTopoNodeTimerUpdates | read-only | mandatory | Total number of topology node records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updat… |
| 1.3.6.1.4.1.18.3.5.14.2.1.12 | ScalarwfAppnNnTopoNodePurges | read-only | mandatory | Total number of topology node records purged from this node's topology database. This occurs when a node has not been updated in a specified amount of time. Th… |
| 1.3.6.1.4.1.18.3.5.14.2.1.13 | ScalarwfAppnNnTopoTgLowRsns | read-only | mandatory | Total number of topology TG updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs ar… |
| 1.3.6.1.4.1.18.3.5.14.2.1.14 | ScalarwfAppnNnTopoTgEqualRsns | read-only | mandatory | Total number of topology TG updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are… |
| 1.3.6.1.4.1.18.3.5.14.2.1.15 | ScalarwfAppnNnTopoTgGoodHighRsns | read-only | mandatory | Total number of topology TG updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcastin… |
| 1.3.6.1.4.1.18.3.5.14.2.1.16 | ScalarwfAppnNnTopoTgBadHighRsns | read-only | mandatory | Total number of topology TG updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detect… |
| 1.3.6.1.4.1.18.3.5.14.2.1.17 | ScalarwfAppnNnTopoTgStateUpdates | read-only | mandatory | Total number of topology TG records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDU… |
| 1.3.6.1.4.1.18.3.5.14.2.1.18 | ScalarwfAppnNnTopoTgErrors | read-only | mandatory | Total number of topology TG records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a da… |
| 1.3.6.1.4.1.18.3.5.14.2.1.19 | ScalarwfAppnNnTopoTgTimerUpdates | read-only | mandatory | Total number of topology TG records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates… |
| 1.3.6.1.4.1.18.3.5.14.2.1.20 | ScalarwfAppnNnTopoTgPurges | read-only | mandatory | Total number of topology TG records purged from this node's topology database. This occurs when a TG has not been updated in a specified amount of time. The ow… |
| 1.3.6.1.4.1.18.3.5.14.2.1.21 | ScalarwfAppnNnTopoTotalRouteCalcs | read-only | mandatory | Number of routes calculated for all class of services since the last initialization. |
| 1.3.6.1.4.1.18.3.5.14.2.1.22 | ScalarwfAppnNnTopoTotalRouteRejs | read-only | mandatory | Number of route requests for all class of services that could not be calculated since last initialization. |
| 1.3.6.1.4.1.18.3.5.14.2.2 | TablewfAppnNnAdjNodeTable | not-accessible | mandatory | Table containing an entry for every adjacent node. The information kept in this table is the last FRSN sent and received, the status of the CP-CP sessions, and… |
| 1.3.6.1.4.1.18.3.5.14.2.2.1 | RowwfAppnNnAdjNodeEntry | not-accessible | mandatory | The adjacent node name is the index for this table. |
| 1.3.6.1.4.1.18.3.5.14.2.2.1.1 | ColumnwfAppnNnAdjNodeAdjName | read-only | mandatory | An administratively-assigned fully-qualified name of this node's adjacent network node. |
| 1.3.6.1.4.1.18.3.5.14.2.2.1.2 | ColumnwfAppnNnAdjNodeCpCpSessStatus | read-only | mandatory | Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Inactive indicates no CP-CP sessions exists between this node and t… |
| 1.3.6.1.4.1.18.3.5.14.2.2.1.3 | ColumnwfAppnNnAdjNodeOutOfSeqTdus | read-only | mandatory | Number of out of sequence Topology Database Updates (TDUs). In a quiesced state, this value is zero. In normal operation, the value varies depending on the net… |
| 1.3.6.1.4.1.18.3.5.14.2.2.1.4 | ColumnwfAppnNnAdjNodeLastFrsnSent | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.18.3.5.14.2.2.1.5 | ColumnwfAppnNnAdjNodeLastFrsnRcvd | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.18.3.5.14.2.3 | NodewfAppnNnTopology | |||
| 1.3.6.1.4.1.18.3.5.14.2.3.1 | TablewfAppnNnTopologyTable | not-accessible | mandatory | Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1 | RowwfAppnNnTopologyEntry | not-accessible | mandatory | The fully-qualified node name is used to index this table. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.1 | ColumnwfAppnNnNodeName | read-only | mandatory | Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.2 | ColumnwfAppnNnNodeFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.3 | ColumnwfAppnNnNodeEntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node entry. Range is 0-31. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.4 | ColumnwfAppnNnNodeType | read-only | mandatory | Type of APPN node. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.5 | ColumnwfAppnNnNodeRsn | read-only | mandatory | Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has … |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.6 | ColumnwfAppnNnNodeRouteAddResist | read-only | mandatory | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, i… |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.7 | ColumnwfAppnNnNodeCongested | read-only | mandatory | Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.8 | ColumnwfAppnNnNodeIsrDepleted | read-only | mandatory | Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources … |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.9 | ColumnwfAppnNnNodeEndptDepleted | read-only | mandatory | Indicates whether session endpoint resources are depleted. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.10 | ColumnwfAppnNnNodeQuiescing | read-only | mandatory | Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.11 | ColumnwfAppnNnNodeGateway | read-only | mandatory | Indicates whether the node provide gateway functions. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.12 | ColumnwfAppnNnNodeCentralDirectory | read-only | mandatory | Indicates whether the node is central directory. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.13 | ColumnwfAppnNnNodeIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing (ISR). |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.14 | ColumnwfAppnNnNodeChainSupport | read-only | mandatory | Indicates whether this node supports chaining. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.15 | ColumnwfAppnNnNodeHprBase | read-only | mandatory | Indicates whether this node supports HPR base functionality. |
| 1.3.6.1.4.1.18.3.5.14.2.3.1.1.16 | ColumnwfAppnNnNodeRtpTower | read-only | mandatory | Indicates whether this node supports RTP tower functionality. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2 | TablewfAppnNnTgTopologyTable | not-accessible | mandatory | Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1 | RowwfAppnNnTgTopologyEntry | not-accessible | mandatory | This table requires three indexes to provide a unique index. The indexes are the owning or originating CPname, the destination CPname, and the TG number. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.1 | ColumnwfAppnNnTgOwner | read-only | mandatory | Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.2 | ColumnwfAppnNnTgDest | read-only | mandatory | Administratively-assigned fully-qualified network name for the destination node for this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.3 | ColumnwfAppnNnTgNum | read-only | mandatory | Number associated with this transmission group. Range is 0-255. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.4 | ColumnwfAppnNnTgFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.5 | ColumnwfAppnNnTgEntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node TG entry. Range is 0-31. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.6 | ColumnwfAppnNnTgDestVirtual | read-only | mandatory | Indicates whether the destination node is a virtual node. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.7 | ColumnwfAppnNnTgDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.8 | ColumnwfAppnNnTgRsn | read-only | mandatory | Current owning node's resource sequence number for this resource. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.9 | ColumnwfAppnNnTgOperational | read-only | mandatory | Indicates whether the transmission group is operational. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.10 | ColumnwfAppnNnTgQuiescing | read-only | mandatory | Indicates whether the transmission group is quiescing. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.11 | ColumnwfAppnNnTgCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported on this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.12 | ColumnwfAppnNnTgEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.13 | ColumnwfAppnNnTgConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.14 | ColumnwfAppnNnTgByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.15 | ColumnwfAppnNnTgSecurity | read-only | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.16 | ColumnwfAppnNnTgDelay | read-write | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with this TG… |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.17 | ColumnwfAppnNnTgModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is … |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.18 | ColumnwfAppnNnTgUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.19 | ColumnwfAppnNnTgUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.20 | ColumnwfAppnNnTgUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.21 | ColumnwfAppnNnTgHprBase | read-only | mandatory | Indicates whether HPR base functionality is supported on this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.2.1.22 | ColumnwfAppnNnTgRtpTower | read-only | mandatory | Indicates whether RTP Tower functionality is supported on this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3 | TablewfAppnNnTopologyFRTable | not-accessible | mandatory | Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1 | RowwfAppnNnTopologyFREntry | not-accessible | mandatory | The fully-qualified node name is used to index this table. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.1 | ColumnwfAppnNnNodeFRName | read-only | mandatory | Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.2 | ColumnwfAppnNnNodeFRFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.3 | ColumnwfAppnNnNodeFREntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node entry. Range is 0-31. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.4 | ColumnwfAppnNnNodeFRType | read-only | mandatory | Type of APPN node. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.5 | ColumnwfAppnNnNodeFRRsn | read-only | mandatory | Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has … |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.6 | ColumnwfAppnNnNodeFRRouteAddResist | read-only | mandatory | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, i… |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.7 | ColumnwfAppnNnNodeFRCongested | read-only | mandatory | Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.8 | ColumnwfAppnNnNodeFRIsrDepleted | read-only | mandatory | Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources … |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.9 | ColumnwfAppnNnNodeFREndptDepleted | read-only | mandatory | Indicates whether session endpoint resources are depleted. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.10 | ColumnwfAppnNnNodeFRQuiescing | read-only | mandatory | Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.11 | ColumnwfAppnNnNodeFRGateway | read-only | mandatory | Indicates whether the node provide gateway functions. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.12 | ColumnwfAppnNnNodeFRCentralDirectory | read-only | mandatory | Indicates whether the node is central directory. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.13 | ColumnwfAppnNnNodeFRIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing (ISR). |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.14 | ColumnwfAppnNnNodeFRChainSupport | read-only | mandatory | Indicates whether this node supports chaining. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.15 | ColumnwfAppnNnNodeFRHprBase | read-only | mandatory | Indicates whether this node supports HPR base functionality. |
| 1.3.6.1.4.1.18.3.5.14.2.3.3.1.16 | ColumnwfAppnNnNodeFRRtpTower | read-only | mandatory | Indicates whether this node supports RTP tower functionality. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4 | TablewfAppnNnTgTopologyFRTable | not-accessible | mandatory | This table contains entries which describes the TGs associated with the Network Nodes in the network |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1 | RowwfAppnNnTgTopologyFREntry | not-accessible | mandatory | This table requires four indexes to provide a unique index. The indexes are the FRSN, the owning or originating CPname, the destination CPname, and the TG numb… |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.1 | ColumnwfAppnNnTgFROwner | read-only | mandatory | Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.2 | ColumnwfAppnNnTgFRDest | read-only | mandatory | Administratively-assigned fully-qualified network name for the destination node for this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.3 | ColumnwfAppnNnTgFRNum | read-only | mandatory | Number associated with this transmission group. Range is 0-255. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.4 | ColumnwfAppnNnTgFRFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.5 | ColumnwfAppnNnTgFREntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node TG entry. Range is 0-31. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.6 | ColumnwfAppnNnTgFRDestVirtual | read-only | mandatory | Indicates whether the destination node is a virtual node. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.7 | ColumnwfAppnNnTgFRDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.8 | ColumnwfAppnNnTgFRRsn | read-only | mandatory | Current owning node's resource sequence number for this resource. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.9 | ColumnwfAppnNnTgFROperational | read-only | mandatory | Indicates whether the transmission group is operational. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.10 | ColumnwfAppnNnTgFRQuiescing | read-only | mandatory | Indicates whether the transmission group is quiescing. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.11 | ColumnwfAppnNnTgFRCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported on this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.12 | ColumnwfAppnNnTgFREffCap | read-only | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.13 | ColumnwfAppnNnTgFRConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.14 | ColumnwfAppnNnTgFRByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.15 | ColumnwfAppnNnTgFRSecurity | read-only | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.16 | ColumnwfAppnNnTgFRDelay | read-write | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with this TG… |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.17 | ColumnwfAppnNnTgFRModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is … |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.18 | ColumnwfAppnNnTgFRUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.19 | ColumnwfAppnNnTgFRUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.20 | ColumnwfAppnNnTgFRUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.21 | ColumnwfAppnNnTgFRHprBase | read-only | mandatory | Indicates whether HPR base functionality is supported on this TG. |
| 1.3.6.1.4.1.18.3.5.14.2.3.4.1.22 | ColumnwfAppnNnTgFRRtpTower | read-only | mandatory | Indicates whether RTP Tower functionality is supported on this TG. |
| 1.3.6.1.4.1.18.3.5.14.3 | NodewfAppnLocalTopology | |||
| 1.3.6.1.4.1.18.3.5.14.3.1 | NodewfAppnLocalThisNode | |||
| 1.3.6.1.4.1.18.3.5.14.3.1.1 | NodewfAppnLocalInfo | |||
| 1.3.6.1.4.1.18.3.5.14.3.1.1.1 | ScalarwfAppnLocalNodeName | read-only | mandatory | Administratively-assigned network name for this node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.2 | ScalarwfAppnLocalNodeType | read-only | mandatory | Type of APPN node. |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.3 | ScalarwfAppnLocalNnRsn | read-only | mandatory | Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has … |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.4 | ScalarwfAppnLocalNnRouteAddResist | read-only | mandatory | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, i… |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.5 | ScalarwfAppnLocalNnCongested | read-only | mandatory | Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.6 | ScalarwfAppnLocalNnIsrDepleted | read-only | mandatory | Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources … |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.7 | ScalarwfAppnLocalNnEndptDepleted | read-only | mandatory | Indicates whether session endpoint resources are depleted. |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.8 | ScalarwfAppnLocalNnQuiescing | read-only | mandatory | Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.9 | ScalarwfAppnLocalNnGateway | read-only | mandatory | Indicates whether the node provide gateway functions. |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.10 | ScalarwfAppnLocalNnCentralDirectory | read-only | mandatory | Indicates whether the node is central directory. |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.11 | ScalarwfAppnLocalNnIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing (ISR). |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.12 | ScalarwfAppnLocalNnChainSupport | read-only | mandatory | Indicates whether the node supports chaining. |
| 1.3.6.1.4.1.18.3.5.14.3.1.1.13 | ScalarwfAppnLocalNnFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.18.3.5.14.3.1.3 | TablewfAppnLocalTgTable | not-accessible | mandatory | TG Table describes all of the TGs owned by this node. The TG destination can be a virtual node, network node, len, or end node. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1 | RowwfAppnLocalTgEntry | not-accessible | mandatory | This table is indexed by the destination CPname and the TG number. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.1 | ColumnwfAppnLocalTgDest | read-only | mandatory | Administratively-assigned fully-qualified network name for the destination node for this TG. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.2 | ColumnwfAppnLocalTgNum | read-only | mandatory | Number associated with this transmission group. Range is 0-255. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.3 | ColumnwfAppnLocalTgDestVirtual | read-only | mandatory | Indicates whether the destination node is a virtual node. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.4 | ColumnwfAppnLocalTgDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.5 | ColumnwfAppnLocalTgRsn | read-only | mandatory | Current owning node's resource sequence number for this resource. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.6 | ColumnwfAppnLocalTgOperational | read-only | mandatory | Indicates whether the transmission group is operational. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.7 | ColumnwfAppnLocalTgQuiescing | read-only | mandatory | Indicates whether the transmission group is quiescing. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.8 | ColumnwfAppnLocalTgCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported on this TG. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.9 | ColumnwfAppnLocalTgEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.10 | ColumnwfAppnLocalTgConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.11 | ColumnwfAppnLocalTgByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.12 | ColumnwfAppnLocalTgSecurity | read-only | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.13 | ColumnwfAppnLocalTgDelay | read-write | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link, with a range of 0 through 255 with some of the more common values … |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.14 | ColumnwfAppnLocalTgModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is … |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.15 | ColumnwfAppnLocalTgUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.16 | ColumnwfAppnLocalTgUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.3.1.3.1.17 | ColumnwfAppnLocalTgUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.18.3.5.14.4 | NodewfAppnDirectory | |||
| 1.3.6.1.4.1.18.3.5.14.4.1 | NodewfAppnDirectoryPerformance | |||
| 1.3.6.1.4.1.18.3.5.14.4.1.1 | ScalarwfAppnDirMaxCaches | read-only | mandatory | Maximum number of cache entries allowed. This is an administratively assigned value. |
| 1.3.6.1.4.1.18.3.5.14.4.1.2 | ScalarwfAppnDirCurCaches | read-only | mandatory | Current number of cache entries. |
| 1.3.6.1.4.1.18.3.5.14.4.1.3 | ScalarwfAppnDirCurHomeEntries | read-only | mandatory | Current number of home entries. |
| 1.3.6.1.4.1.18.3.5.14.4.1.4 | ScalarwfAppnDirRegEntries | read-only | mandatory | Current number of registered entries. |
| 1.3.6.1.4.1.18.3.5.14.4.1.5 | ScalarwfAppnDirInLocates | read-only | mandatory | Number of directed locates received. |
| 1.3.6.1.4.1.18.3.5.14.4.1.6 | ScalarwfAppnDirInBcastLocates | read-only | mandatory | Number of broadcast locates received. |
| 1.3.6.1.4.1.18.3.5.14.4.1.7 | ScalarwfAppnDirOutLocates | read-only | mandatory | Number of directed locates sent. |
| 1.3.6.1.4.1.18.3.5.14.4.1.8 | ScalarwfAppnDirOutBcastLocates | read-only | mandatory | Number of broadcast locates sent. |
| 1.3.6.1.4.1.18.3.5.14.4.1.9 | ScalarwfAppnDirNotFoundLocates | read-only | mandatory | Number of directed locates returned with a 'not found'. |
| 1.3.6.1.4.1.18.3.5.14.4.1.10 | ScalarwfAppnDirNotFoundBcastLocates | read-only | mandatory | Number of broadcast locates returned with a not found. |
| 1.3.6.1.4.1.18.3.5.14.4.1.11 | ScalarwfAppnDirLocateOutstands | read-only | mandatory | Current number of outstanding locates, both directed and broadcast. This value varies. A value of zero indicates that no locates are unanswered. |
| 1.3.6.1.4.1.18.3.5.14.4.2 | TablewfAppnDirTable | not-accessible | mandatory | Table containing information about all known LUs and TPs. |
| 1.3.6.1.4.1.18.3.5.14.4.2.1 | RowwfAppnDirEntry | not-accessible | mandatory | This table is indexed by the LU name. |
| 1.3.6.1.4.1.18.3.5.14.4.2.1.1 | ColumnwfAppnDirLuName | read-only | mandatory | Fully-qualified network LU name in the domain of the serving network node. |
| 1.3.6.1.4.1.18.3.5.14.4.2.1.2 | ColumnwfAppnDirServerName | read-only | mandatory | Fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully-qualified name is returned. |
| 1.3.6.1.4.1.18.3.5.14.4.2.1.3 | ColumnwfAppnDirLuOwnerName | read-only | mandatory | Fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an una… |
| 1.3.6.1.4.1.18.3.5.14.4.2.1.4 | ColumnwfAppnDirLocation | read-only | mandatory | Specifies the location of the LU. |
| 1.3.6.1.4.1.18.3.5.14.4.2.1.5 | ColumnwfAppnDirType | read-only | mandatory | Directory types are: 1 - Home The LU is in the domain of the local network node and the LU information has been configured at the local node. 2 - Cache The LU … |
| 1.3.6.1.4.1.18.3.5.14.4.2.1.6 | ColumnwfAppnDirWildCard | read-only | mandatory | 1 - Other means unknown type of LU entry. 2 - Expliced-entry means the full LUNAME will be used for locating this LU. 3 - Partial-wildcard means only the non-b… |
| 1.3.6.1.4.1.18.3.5.14.4.3 | TablewfAppnDirDefineTable | not-accessible | mandatory | this table contains entries which define Directory entries |
| 1.3.6.1.4.1.18.3.5.14.4.3.1 | RowwfAppnDirDefineEntry | not-accessible | mandatory | An entry in wfAppnDirDefineTable. |
| 1.3.6.1.4.1.18.3.5.14.4.3.1.1 | ColumnwfAppnDirDefineDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Directory Entry instance. |
| 1.3.6.1.4.1.18.3.5.14.4.3.1.2 | ColumnwfAppnDirDefineDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Directory Entry. |
| 1.3.6.1.4.1.18.3.5.14.4.3.1.3 | ColumnwfAppnDirDefineResourceName | read-only | mandatory | This specifies the resource name in the local Directory |
| 1.3.6.1.4.1.18.3.5.14.4.3.1.4 | ColumnwfAppnDirDefineResourceType | read-write | mandatory | This specifies the resource type in the local Directory |
| 1.3.6.1.4.1.18.3.5.14.4.3.1.5 | ColumnwfAppnDirDefineParentName | read-write | mandatory | This specifies the name of the parent of the resource, if the resource is an LU |
| 1.3.6.1.4.1.18.3.5.14.4.3.1.6 | ColumnwfAppnDirDefineParentType | read-write | mandatory | This specifies the type of the parent of the resource, if the resource is an LU |
| 1.3.6.1.4.1.18.3.5.14.5 | NodewfAppnCos | |||
| 1.3.6.1.4.1.18.3.5.14.5.1 | TablewfAppnCosModeTable | not-accessible | mandatory | Table representing all of the defined mode names for this node. The table contains the matching COS name. |
| 1.3.6.1.4.1.18.3.5.14.5.1.1 | RowwfAppnCosModeEntry | not-accessible | mandatory | This table is indexed by the Mode Name. |
| 1.3.6.1.4.1.18.3.5.14.5.1.1.1 | ColumnwfAppnCosModeName | read-only | mandatory | Administratively-assigned name for this mode entry. |
| 1.3.6.1.4.1.18.3.5.14.5.1.1.2 | ColumnwfAppnCosModeCosName | read-only | mandatory | An administratively assigned name for this Class of Service. |
| 1.3.6.1.4.1.18.3.5.14.5.2 | TablewfAppnCosNameTable | not-accessible | mandatory | Table representing all of the defined class-of-service names for this node. The COS node and TG tables are accessed using the same index, which is the COS name. |
| 1.3.6.1.4.1.18.3.5.14.5.2.1 | RowwfAppnCosNameEntry | not-accessible | mandatory | The COS name is the index to this table. |
| 1.3.6.1.4.1.18.3.5.14.5.2.1.1 | ColumnwfAppnCosName | read-only | mandatory | Administratively-assigned name for this class of service. |
| 1.3.6.1.4.1.18.3.5.14.5.2.1.2 | ColumnwfAppnCosTransPriority | read-only | mandatory | Transmission priority for this class of service. Values are: Low Medium High Network |
| 1.3.6.1.4.1.18.3.5.14.5.3 | TablewfAppnCosNodeRowTable | not-accessible | mandatory | This table contains all node-row information for all class of service in this node. |
| 1.3.6.1.4.1.18.3.5.14.5.3.1 | RowwfAppnCosNodeRowEntry | not-accessible | mandatory | The COS name is the first index and a integer is the second index to insure a unique index. |
| 1.3.6.1.4.1.18.3.5.14.5.3.1.1 | ColumnwfAppnCosNodeRowName | read-only | mandatory | Administratively-assigned name for this class of service. |
| 1.3.6.1.4.1.18.3.5.14.5.3.1.2 | ColumnwfAppnCosNodeRowIndex | read-only | mandatory | Index of COS name. This same value is used to access the node and TG COS tables. Range of values is 0-255. |
| 1.3.6.1.4.1.18.3.5.14.5.3.1.3 | ColumnwfAppnCosNodeRowWgt | read-only | mandatory | Weight to be associated with the nodes that fit the criteria specified by this node row. |
| 1.3.6.1.4.1.18.3.5.14.5.3.1.4 | ColumnwfAppnCosNodeRowResistMin | read-only | mandatory | Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing. |
| 1.3.6.1.4.1.18.3.5.14.5.3.1.5 | ColumnwfAppnCosNodeRowResistMax | read-only | mandatory | Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing. |
| 1.3.6.1.4.1.18.3.5.14.5.3.1.6 | ColumnwfAppnCosNodeRowMinCongestAllow | read-only | mandatory | Indicates whether low congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to… |
| 1.3.6.1.4.1.18.3.5.14.5.3.1.7 | ColumnwfAppnCosNodeRowMaxCongestAllow | read-only | mandatory | Indicates whether high congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either t… |
| 1.3.6.1.4.1.18.3.5.14.5.4 | TablewfAppnCosTgRowTable | not-accessible | mandatory | Table containing all the Tg-row information for all class of service defined in this node. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1 | RowwfAppnCosTgRowEntry | not-accessible | mandatory | The TgRowName and the TgRowIndex are the index for this table. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.1 | ColumnwfAppnCosTgRowName | read-only | mandatory | Administratively-assigned name for this class of service. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.2 | ColumnwfAppnCosTgRowIndex | read-only | mandatory | Index of COS name. This same value is used to access the node and TG COS tables. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.3 | ColumnwfAppnCosTgRowWgt | read-only | mandatory | Weight to be associated with the nodes that fit the criteria specified by this tg-row. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.4 | ColumnwfAppnCosTgRowEffCapMin | read-only | mandatory | Minimum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived fr… |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.5 | ColumnwfAppnCosTgRowEffCapMax | read-only | mandatory | Maximum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived fr… |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.6 | ColumnwfAppnCosTgRowConnCostMin | read-only | mandatory | Minimum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the T… |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.7 | ColumnwfAppnCosTgRowConnCostMax | read-only | mandatory | Maximum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the T… |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.8 | ColumnwfAppnCosTgRowByteCostMin | read-only | mandatory | Minimum acceptable cost per byte for this Class of Service. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.9 | ColumnwfAppnCosTgRowByteCostMax | read-only | mandatory | Maximum acceptable cost per byte for this Class of Service. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.10 | ColumnwfAppnCosTgRowSecurityMin | read-only | mandatory | Minimum acceptable security for this Class of Service. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.11 | ColumnwfAppnCosTgRowSecurityMax | read-only | mandatory | Maximum acceptable security for this Class of Service. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.12 | ColumnwfAppnCosTgRowDelayMin | read-write | mandatory | Minimum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. DE… |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.13 | ColumnwfAppnCosTgRowDelayMax | read-write | mandatory | Maximum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. DE… |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.14 | ColumnwfAppnCosTgRowUsr1Min | read-only | mandatory | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.15 | ColumnwfAppnCosTgRowUsr1Max | read-only | mandatory | Maximum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.16 | ColumnwfAppnCosTgRowUsr2Min | read-only | mandatory | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.17 | ColumnwfAppnCosTgRowUsr2Max | read-only | mandatory | Maximum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.18 | ColumnwfAppnCosTgRowUsr3Min | read-only | mandatory | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.18.3.5.14.5.4.1.19 | ColumnwfAppnCosTgRowUsr3Max | read-only | mandatory | Maximum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.18.3.5.14.6 | NodewfAppnTps | |||
| 1.3.6.1.4.1.18.3.5.14.6.1 | TablewfAppnTpPingTable | not-accessible | mandatory | This table contains an entry for each instance of the APING application |
| 1.3.6.1.4.1.18.3.5.14.6.1.1 | RowwfAppnTpPingEntry | not-accessible | mandatory | An entry in wfAppnTpPingTable. |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.1 | ColumnwfAppnTpPingDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a APING instance. |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.2 | ColumnwfAppnTpPingDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this APING instance. |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.3 | ColumnwfAppnTpPingIndex | read-only | mandatory | This is the index of the Ping entry |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.4 | ColumnwfAppnTpPingFqPluName | read-write | mandatory | This is the Fully-Qualified name of the Partner LU running the APINGD TP |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.5 | ColumnwfAppnTpPingDataLength | read-write | mandatory | This is the length of the test data to be sent to the LU being PING-ed |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.6 | ColumnwfAppnTpPingConsecutiveSends | read-write | mandatory | This specifies the number of consecutive sends that will be issued |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.7 | ColumnwfAppnTpPingEchoDisable | read-write | mandatory | This specifies whether the Target of the PING will be requested to echo the data |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.8 | ColumnwfAppnTpPingIterations | read-write | mandatory | This specifies the number of times the PING should be repeated |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.9 | ColumnwfAppnTpPingPartnerTpName | read-write | mandatory | This specifies the partner TP name to ping. If no name is specified 'APINGD' will be used |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.10 | ColumnwfAppnTpPingMode | read-write | mandatory | This specifies the mode to be used for this PING |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.11 | ColumnwfAppnTpPingState | read-only | mandatory | This indicates the current state of the PING request |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.12 | ColumnwfAppnTpPingAllocTime | read-only | mandatory | This indicates the time (in milliseconds) it took to allocate the PING conversation |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.13 | ColumnwfAppnTpPingMinTime | read-only | mandatory | This indicates the minimum time (in milliseconds) it took to PING the partner |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.14 | ColumnwfAppnTpPingMaxTime | read-only | mandatory | This indicates the maximum time (in milliseconds) it took to PING the partner |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.15 | ColumnwfAppnTpPingAvgTime | read-only | mandatory | This indicates the average time (in milliseconds) it took to PING the partner |
| 1.3.6.1.4.1.18.3.5.14.6.1.1.16 | ColumnwfAppnTpPingPartnerVersion | read-only | mandatory | This is the version string returned by the partner |
| 1.3.6.1.4.1.18.3.5.14.6.3 | TablewfAppnTpTunnelTable | not-accessible | mandatory | This table contains entries for each APPN Tunnel |
| 1.3.6.1.4.1.18.3.5.14.6.3.1 | RowwfAppnTpTunnelEntry | not-accessible | mandatory | An entry in wfAppnTpTunnelTable. |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.1 | ColumnwfAppnTpTunnelDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an APPN Tunnel instance. |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.2 | ColumnwfAppnTpTunnelDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this APPN Tunnel instance. |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.3 | ColumnwfAppnTpTunnelState | read-only | mandatory | The current state of the Tunnel. |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.4 | ColumnwfAppnTpTunnelCct | read-only | mandatory | This is the circuit number of the circuit running over this APPN Tunnel |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.5 | ColumnwfAppnTpTunnelFqPluName | read-write | mandatory | This specifies the Partner LU for this APPN Tunnel |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.6 | ColumnwfAppnTpTunnelModeName | read-write | mandatory | This specifies the Mode for this APPN Tunnel |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.7 | ColumnwfAppnTpTunnelMedia | read-write | mandatory | This specifies the media to be emulated by this tunnel |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.8 | ColumnwfAppnTpTunnelMacAddress | read-write | mandatory | This specifies the local MAC address to be used by this tunnel |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.9 | ColumnwfAppnTpTunnelTxFrames | read-only | mandatory | This indicates the number of frames transmitted over this APPN Tunnel |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.10 | ColumnwfAppnTpTunnelRxFrames | read-only | mandatory | This indicates the number of frames received over this APPN Tunnel |
| 1.3.6.1.4.1.18.3.5.14.6.3.1.11 | ColumnwfAppnTpTunnelDropFrames | read-only | mandatory | This indicates the number of frames dropped by this APPN Tunnel |
| 1.3.6.1.4.1.18.3.5.14.7 | NodewfAppnDlu | |||
| 1.3.6.1.4.1.18.3.5.14.7.1 | TablewfAppnDlurLuTable | not-accessible | mandatory | This table contains an entry for each LU currently being serviced by DLUR |
| 1.3.6.1.4.1.18.3.5.14.7.1.1 | RowwfAppnDlurLuEntry | not-accessible | mandatory | An entry in wfAppnDlurLuTable. |
| 1.3.6.1.4.1.18.3.5.14.7.1.1.1 | ColumnwfAppnDlurLuName | read-only | mandatory | This is the name of the LU |
| 1.3.6.1.4.1.18.3.5.14.7.1.1.2 | ColumnwfAppnDlurLuPuName | read-only | mandatory | This is the name of the PU associated with the LU |
| 1.3.6.1.4.1.18.3.5.14.7.1.1.3 | ColumnwfAppnDlurLuDlusName | read-only | mandatory | This is the name of the DLUS node supporting this LU |
| 1.3.6.1.4.1.18.3.5.14.7.1.1.4 | ColumnwfAppnDlurLuNauAddress | read-only | mandatory | This is the Network Addressable Unit address of this LU |
| 1.3.6.1.4.1.18.3.5.14.7.1.1.5 | ColumnwfAppnDlurLuPluName | read-only | mandatory | This is the name of the Partner LU |
| 1.3.6.1.4.1.18.3.5.14.7.1.1.6 | ColumnwfAppnDlurLuRscv | read-only | mandatory | This is the RSCV being used by this LU session |
| 1.3.6.1.4.1.18.3.5.14.7.1.1.7 | ColumnwfAppnDlurLuRscvText | read-only | mandatory | This is the RSCV (in a human-readable format) for this DLUR connection |
| 1.3.6.1.4.1.18.3.5.14.7.2 | TablewfAppnDlurPuTable | not-accessible | mandatory | This table contains an entry for each PU currently being serviced by DLUR |
| 1.3.6.1.4.1.18.3.5.14.7.2.1 | RowwfAppnDlurPuEntry | not-accessible | mandatory | An entry in wfAppnDlurPuTable. |
| 1.3.6.1.4.1.18.3.5.14.7.2.1.1 | ColumnwfAppnDlurPuName | read-only | mandatory | This is the name of the PU |
| 1.3.6.1.4.1.18.3.5.14.7.2.1.2 | ColumnwfAppnDlurPuId | read-only | mandatory | ID of this PU |
| 1.3.6.1.4.1.18.3.5.14.7.2.1.3 | ColumnwfAppnDlurPuDefinedDlusName | read-only | mandatory | This is the name of the primary DLUS node defined this PU |
| 1.3.6.1.4.1.18.3.5.14.7.2.1.4 | ColumnwfAppnDlurPuBackupDlusName | read-only | mandatory | This is the name of the backup DLUS node defined this PU |
| 1.3.6.1.4.1.18.3.5.14.7.2.1.5 | ColumnwfAppnDlurPuActiveDlusName | read-only | mandatory | This is the name of the DLUS node currently supporting this PU |
| 1.3.6.1.4.1.18.3.5.14.7.2.1.6 | ColumnwfAppnDlurPuPcid | read-only | mandatory | This is the PCID of the DLUR 'pipe' session |
| 1.3.6.1.4.1.18.3.5.14.7.2.1.7 | ColumnwfAppnDlurPuFqCpName | read-only | mandatory | This is the Fully-qualified CP name of the node assigning the PCID for the DLUR 'pipe' session |
| 1.3.6.1.4.1.18.3.5.14.7.3 | TablewfAppnDlurDlusTable | not-accessible | mandatory | This table contains an entry for each DLUS known to this DLUR |
| 1.3.6.1.4.1.18.3.5.14.7.3.1 | RowwfAppnDlurDlusEntry | not-accessible | mandatory | An entry in wfAppnDlurDlusTable. |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.1 | ColumnwfAppnDlurDlusName | read-only | mandatory | This is the fully-qualified name of the DLUS node |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.2 | ColumnwfAppnDlurDlusIsDefault | read-only | mandatory | This indicates if the DLUS is the default DLUS |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.3 | ColumnwfAppnDlurDlusIsBackupDefault | read-only | mandatory | This indicates if the DLUS is the default backup DLUS |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.4 | ColumnwfAppnDlurDlusPipeState | read-only | mandatory | This indicates the state of the DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.5 | ColumnwfAppnDlurDlusActivePus | read-only | mandatory | This indicates the number of PUs currently using this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.6 | ColumnwfAppnDlurDlusSentReqactpus | read-only | mandatory | This indicates the number of REQACTPUs sent over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.7 | ColumnwfAppnDlurDlusRcvReqactpuRsps | read-only | mandatory | This indicates the number of REQACTPU responses received over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.8 | ColumnwfAppnDlurDlusRcvActpus | read-only | mandatory | This indicates the number of ACTPUs received over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.9 | ColumnwfAppnDlurDlusSentActpuRsps | read-only | mandatory | This indicates the number of ACTPU responses sent over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.10 | ColumnwfAppnDlurDlusSentReqdactpus | read-only | mandatory | This indicates the number of REQDACTPUs sent over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.11 | ColumnwfAppnDlurDlusRcvReqdactpuRsps | read-only | mandatory | This indicates the number of REQDACTPU responses received over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.12 | ColumnwfAppnDlurDlusRcvDactpus | read-only | mandatory | This indicates the number of DACTPUs received over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.13 | ColumnwfAppnDlurDlusSentDactpuRsps | read-only | mandatory | This indicates the number of DACTPU responses sent over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.14 | ColumnwfAppnDlurDlusRcvActlus | read-only | mandatory | This indicates the number of ACTLUs received over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.15 | ColumnwfAppnDlurDlusSentActluRsps | read-only | mandatory | This indicates the number of ACTLU responses sent over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.16 | ColumnwfAppnDlurDlusRcvDactlus | read-only | mandatory | This indicates the number of DACTLUs received over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.17 | ColumnwfAppnDlurDlusSentDactluRsps | read-only | mandatory | This indicates the number of DACTLU responses sent over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.18 | ColumnwfAppnDlurDlusRcvSscpPuMus | read-only | mandatory | This indicates the number of SSCP-PU MUs received over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.19 | ColumnwfAppnDlurDlusSentSscpPuMus | read-only | mandatory | This indicates the number of SSCP-PU MUs sent over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.20 | ColumnwfAppnDlurDlusRcvSscpLuMus | read-only | mandatory | This indicates the number of SSCP-LU MUs received over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.7.3.1.21 | ColumnwfAppnDlurDlusSentSscpLuMus | read-only | mandatory | This indicates the number of SSCP-LU MUs sent over this DLUR-DLUS pipe |
| 1.3.6.1.4.1.18.3.5.14.8 | NodewfAppnPathSwitch | |||
| 1.3.6.1.4.1.18.3.5.14.8.1 | ScalarwfAppnPathSwitchDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a path switch. |
| 1.3.6.1.4.1.18.3.5.14.8.2 | ScalarwfAppnPathSwitchDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this path switch. |
| 1.3.6.1.4.1.18.3.5.14.8.3 | ScalarwfAppnPathSwitchRtpConnName | read-write | mandatory | This is the name of the RTP connection to path switch |