Wellfleet-ASYNC-MIB
40 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.3 | TablewfAsyncTable | not-accessible | mandatory | ASYNC line record |
| 1.3.6.1.4.1.18.3.4.3.1 | RowwfAsyncEntry | not-accessible | mandatory | An entry in the ASYNC table |
| 1.3.6.1.4.1.18.3.4.3.1.1 | ColumnwfAsyncDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.3.1.2 | ColumnwfAsyncDisable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.3.1.3 | ColumnwfAsyncState | read-only | mandatory | Line Driver state variable, Not Present, DSR Wait, Init, Down, Up |
| 1.3.6.1.4.1.18.3.4.3.1.4 | ColumnwfAsyncSlot | read-only | mandatory | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.3.1.5 | ColumnwfAsyncConnector | read-only | mandatory | Instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined… |
| 1.3.6.1.4.1.18.3.4.3.1.6 | ColumnwfAsyncCct | read-write | mandatory | CCT number for this line instance |
| 1.3.6.1.4.1.18.3.4.3.1.7 | ColumnwfAsyncMtu | read-write | mandatory | MTU parameter, this is buffer size for ASYNC media, fixed |
| 1.3.6.1.4.1.18.3.4.3.1.8 | ColumnwfAsyncMadr | read-only | mandatory | Line MAC address, fixed - line driver fills in from the 48 bit address stored in the serial number prom for this connector. |
| 1.3.6.1.4.1.18.3.4.3.1.9 | ColumnwfAsyncStartProtocol | read-write | mandatory | Start protocol selection is provided via this parameter. The supported protocols can be selected per interface. |
| 1.3.6.1.4.1.18.3.4.3.1.10 | ColumnwfAsyncRxOctets | read-only | mandatory | Number of octets received without error |
| 1.3.6.1.4.1.18.3.4.3.1.11 | ColumnwfAsyncTxOctets | read-only | mandatory | Number of octets transmitted without error |
| 1.3.6.1.4.1.18.3.4.3.1.12 | ColumnwfAsyncRxErrors | read-only | mandatory | Number of receive errors |
| 1.3.6.1.4.1.18.3.4.3.1.13 | ColumnwfAsyncTxErrors | read-only | mandatory | Number of transmission errors |
| 1.3.6.1.4.1.18.3.4.3.1.14 | ColumnwfAsyncRxLackRescs | read-only | mandatory | Number of Rx frames dropped due to lack of buffer resources |
| 1.3.6.1.4.1.18.3.4.3.1.15 | ColumnwfAsyncTxLackRescs | read-only | mandatory | Number of frames clipped in driver's transmit routine due to transmit congestion. |
| 1.3.6.1.4.1.18.3.4.3.1.16 | ColumnwfAsyncTxUnderFlows | read-only | mandatory | Number of transmission underflows, device FIFO went empty before next DMA request was granted. |
| 1.3.6.1.4.1.18.3.4.3.1.17 | ColumnwfAsyncTxRejects | read-only | mandatory | Number of reject frames which were transmitted |
| 1.3.6.1.4.1.18.3.4.3.1.18 | ColumnwfAsyncRxRejects | read-only | mandatory | Number of reject frames which were received |
| 1.3.6.1.4.1.18.3.4.3.1.19 | ColumnwfAsyncRxOverFlows | read-only | mandatory | Number of receive overflows, device FIFO overflowed before next DMA cycle granted. No buffer resources available. |
| 1.3.6.1.4.1.18.3.4.3.1.20 | ColumnwfAsyncRxBadOctets | read-only | mandatory | Number of bad receive frames, caused by FCS errors or non octet aligned. |
| 1.3.6.1.4.1.18.3.4.3.1.21 | ColumnwfAsyncRxRunts | read-only | mandatory | Number of runt frames received |
| 1.3.6.1.4.1.18.3.4.3.1.22 | ColumnwfAsyncTxQueueLength | read-only | mandatory | Current Transmit Queue Length. |
| 1.3.6.1.4.1.18.3.4.3.1.23 | ColumnwfAsyncRxQueueLength | read-only | mandatory | Current Receive Queue Length. |
| 1.3.6.1.4.1.18.3.4.3.1.24 | ColumnwfAsyncRxReplenMisses | read-only | mandatory | Number of packet buffer misses while attempting to replenish driver receive ring. |
| 1.3.6.1.4.1.18.3.4.3.1.25 | ColumnwfAsyncLineNumber | read-write | mandatory | line number for this line instance |
| 1.3.6.1.4.1.18.3.4.3.1.26 | ColumnwfAsyncRemoteAddress | read-write | mandatory | Remote TCP host IP address |
| 1.3.6.1.4.1.18.3.4.3.1.27 | ColumnwfAsyncRemotePort | read-write | mandatory | Remote port for TCP connection |
| 1.3.6.1.4.1.18.3.4.3.1.28 | ColumnwfAsyncLocalPort | read-write | mandatory | Local port for TCP connection |
| 1.3.6.1.4.1.18.3.4.3.1.29 | ColumnwfAsyncBaud | read-write | mandatory | Async line speed |
| 1.3.6.1.4.1.18.3.4.3.1.30 | ColumnwfAsyncIdleTimer | read-write | mandatory | Async line Idle timer |
| 1.3.6.1.4.1.18.3.4.3.1.31 | ColumnwfAsyncRxWindow | read-write | mandatory | Configured TCP receive window |
| 1.3.6.1.4.1.18.3.4.3.1.32 | ColumnwfAsyncMinRxWindows | read-only | mandatory | Low-water mark of receive window (for latest connection) |
| 1.3.6.1.4.1.18.3.4.3.1.33 | ColumnwfASyncSecTxQmaxs | read-only | mandatory | secondary TX queue hi-water mark (for this connection) |
| 1.3.6.1.4.1.18.3.4.3.1.34 | ColumnwfASyncSecTxQlens | read-only | mandatory | secondary TX queue present value |
| 1.3.6.1.4.1.18.3.4.3.1.35 | ColumnwfAsyncTCPKeepalive | read-write | mandatory | Keepalive timer. A keepalive (probe) message is sent out if there is no activity in this number of seconds. |
| 1.3.6.1.4.1.18.3.4.3.1.36 | ColumnwfAsyncTCPInactivityLimit | read-write | mandatory | Inactivity limit. Connection (eligable for) reset if no activity in this number of seconds. |
| 1.3.6.1.4.1.18.3.4.3.1.37 | ColumnwfAsyncCfgTxQueueLength | read-write | mandatory | Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based … |
| 1.3.6.1.4.1.18.3.4.3.1.38 | ColumnwfAsyncCfgRxQueueLength | read-write | mandatory | Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based d… |