Wellfleet-ATM-LE-MIB
153 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.5.20.1 | TablewfAtmLecConfigTable | not-accessible | mandatory | ATM LEC Interface table - One per LEC Client This table deals with configuration and operational status |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1 | RowwfAtmLecConfigEntry | not-accessible | mandatory | per LEC Client objects - wfAtmLecCct corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.1 | ColumnwflecConfDelete | read-write | mandatory | Indication to create or delete an ATM LE Client Config Entry from the MIB |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.2 | ColumnwflecRowStatus | read-write | mandatory | Indication to create or delete an ATM LE Client. This will remove the LEC from the Emulated LAN. However, the instance is not removed from the MIB |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.3 | ColumnwflecConfigCct | read-only | mandatory | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.4 | ColumnwflecOwner | read-write | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.5 | ColumnwflecConfigMode | read-write | mandatory | Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.6 | ColumnwflecConfigLanType | read-write | mandatory | C2 - LEC LAN Type The data frame format which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter i… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.7 | ColumnwflecConfigMaxDataFrameSize | read-write | mandatory | C3 Maximum Data Frame Size. The maximum data frame size which this client will use the next time it returns to the Initial State. Auto-configuring clients use … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.8 | ColumnwflecConfigLanName | read-write | mandatory | C5 ELAN Name. The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their Configure … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.9 | ColumnwflecConfigLesAtmAddress | read-write | mandatory | C9 LE Server ATM Address. The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When lecConfigMode is '… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.10 | ColumnwflecControlTimeout | read-write | mandatory | C7 Control Time-out. Time out period used for timing out most request/response control frame most request/response control frame interactions. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.11 | ColumnwflecMaxUnknownFrameCount | read-write | mandatory | C10 Maximum Unknown Frame Count. This parameter MUST be less than or equal to 10. (See parameter C11) |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.12 | ColumnwflecMaxUnknownFrameTime | read-write | mandatory | C11 Maximum Unknown Frame Time. This parameter MUST be greater than or equal to 1.0 seconds. Within the period of time defined by the Maximum Unknown Frame Tim… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.13 | ColumnwflecVccTimeoutPeriod | read-write | mandatory | C12 VCC Timeout Period. A LE Client may release any Data Direct or Multicast Send VCC that it has not used to transmit or receive any data frames for the lengt… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.14 | ColumnwflecMaxRetryCount | read-write | mandatory | C13 Maximum Retry Count. A LE CLient MUST not retry a LE-ARP for a given frame's LAN destination more than Maximum Retry Count times, after which it must disca… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.15 | ColumnwflecAgingTime | read-write | mandatory | C17 Aging Time. The maximum time that a LE Client will maintain an entry in its LE-ARP cache in the absence of a verification of that relationship. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.16 | ColumnwflecForwardDelayTime | read-write | mandatory | C18 Forward Delay Time. The maximum time that a LE Client will maintain an entry in its LE-ARP cache in the absence of a verification of that relationship, so … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.17 | ColumnwflecExpectedArpResponseTime | read-write | mandatory | C20 Expected LE_ARP Reponse Time. The maximum time (seconds) that the LEC expects an LE_ARP_REQUEST/ LE_ARP_RESPONSE cycle to take. Used for retries and verifi… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.18 | ColumnwflecFlushTimeOut | read-write | mandatory | C21 Flush Time-out. Time limit (seconds) to wait to receive a LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been sent before taking recovery action. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.19 | ColumnwflecPathSwitchingDelay | read-write | mandatory | C22 Path Switching Delay. The time (seconds) since sending a frame to the BUS after which the LE Client may assume that the frame has been either discarded or … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.20 | ColumnwflecLocalSegmentID | read-write | mandatory | C23 Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridges.' |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.21 | ColumnwflecMulticastSendType | read-write | mandatory | C24 Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. This is the method to be used … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.22 | ColumnwflecMulticastSendAvgRate | read-write | mandatory | C25 Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Sustai… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.23 | ColumnwflecMulticastSendPeakRate | read-write | mandatory | C26 Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Peak … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.24 | ColumnwflecConnectionCompleteTimer | read-write | mandatory | C28 Connection Complete Timer. Optional. In Connection Establishment this is the time period in which data or a READY_IND message is expected from a Calling Pa… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.25 | ColumnwflecFlushEnable | read-write | mandatory | Flush Protocol enable/disable - ATM_LEC_FLUSH_ENABLED - ATM LE flush protocol is used when switching VCs. If the Flush timeout (wflecFlushTimeOut) expires data… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.26 | ColumnwflecConfigRetry | read-write | mandatory | This attribute specifies how many retries should be attempted if any part of the config phase fails. The config phase starts with setting up the config direct … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.27 | ColumnwflecMulticastFwdTimeout | read-write | mandatory | The attribute specifies how many seconds to wait for the Multicast Forward VC to be set up before retrying. The retry will include closing the Multicast Send V… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.28 | ColumnwflecMulticastFwdRetry | read-write | mandatory | The attribute specifies how many retries should be made to get the Multicast Forward VC setup. The LEC will retry after wflecMulticastFwdTimeout seconds and wi… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.29 | ColumnwflecDebugLevel | read-write | mandatory | Debug Levels - The level of debug desired from the Portable LEC code LEC_DBG_OFF - 0 LEC_DBG_WARN - 1 LEC_DBG_ERR - 2 LEC_DBG_MSG - 4 LEC_DBG_DBG - 8 LEC_DBG_V… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.30 | ColumnwflecConfigLECSAtmAddress | read-write | mandatory | The LE Config Server Address to be used. If left (or set) to NULL_VAL the well-known LECS ATM address will be used. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.31 | ColumnwflecConfigV2Capable | read-write | mandatory | Indication to enable or disable LANE V2 support for this ATM LE Client. |
| 1.3.6.1.4.1.18.3.5.9.5.20.2 | TablewfAtmLecStatusTable | not-accessible | mandatory | Lan Emulation Status Group Read-only table containing identification, status, and operational information about the LAN Emulation Clients this agent manages |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1 | RowwfAtmLecStatusEntry | not-accessible | mandatory | per LEC Client objects - wfAtmLecCct corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.1 | ColumnwflecStatusCct | read-only | mandatory | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.2 | ColumnwflecPrimaryAtmAddress | read-only | mandatory | C1 - LE Client's ATM Address. |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.3 | ColumnwflecID | read-only | mandatory | C14 LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in contro… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.4 | ColumnwflecInterfaceState | read-only | mandatory | Indicates the state for the LE Client |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.5 | ColumnwflecLastFailureRespCode | read-only | mandatory | Failure response code. Status code from the last failed Configure response or Join response. Failed responses are those for which the LE_CONFIGURE_RESPONSE / L… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.6 | ColumnwflecLastFailureState | read-only | mandatory | Last failure state The state this client was in when it updated the 'lecLastFailureRespCode'. If 'lecLastFailureRespCode' is 'none', this object has the value … |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.7 | ColumnwflecProtocol | read-only | mandatory | The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.8 | ColumnwflecVersion | read-only | mandatory | The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.9 | ColumnwflecTopologyChange | read-only | mandatory | C19 Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Ageing Time C17, to age entries in its LE-ARP ca… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.10 | ColumnwflecConfigServerAtmAddress | read-only | mandatory | The ATM address of the LECS for this Client |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.11 | ColumnwflecConfigSource | read-only | mandatory | Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to establish the Configuration Direct … |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.12 | ColumnwflecActualLanType | read-only | mandatory | C2 - LEC LAN Type The data frame format that this LAN Emulation Client is using right now. This may come from lecConfigLanType, the LAN Emulation Configuration… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.13 | ColumnwflecActualMaxDataFrameSize | read-only | mandatory | C3 Maximum Data Frame Size. The maximum data frame size that this LAN Emulation client is using right now. This may come from lecConfigLanType, the LAN Emulati… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.14 | ColumnwflecActualLanName | read-only | mandatory | C5 ELAN Name. The identity of the emulated LAN which this client last joined, or wishes to join. This may come from lecConfigLanType, the LAN Emulation Configu… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.15 | ColumnwflecActualLesAtmAddress | read-only | mandatory | C9 LE Server ATM Address. The LAN Emulation Server address currently in use or most recently attempted. If no LAN Emulation Server attachment has been tried, t… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.16 | ColumnwflecProxyClient | read-only | mandatory | C4 Proxy When a client joins an ATM emulated LAN, it indicates whether it wants to act as a proxy. Proxy clients are allowed to represent unregistered MAC addr… |
| 1.3.6.1.4.1.18.3.5.9.5.20.3 | TablewfAtmLecOperConfigTable | not-accessible | mandatory | ATM LEC Interface table - One per LEC Client This table deals with configuration and operational status |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1 | RowwfAtmLecOperConfigEntry | not-accessible | mandatory | per LEC Operation Config objects - wfAtmLecOperConfigCct corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.1 | ColumnwflecOperConfigCct | read-only | mandatory | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.2 | ColumnwflecOperConfigControlTimeout | read-only | mandatory | C7 Control Time-out. Time out period used for timing out most request/response control frame most request/response control frame interactions. |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.3 | ColumnwflecOperConfigMaxUnknownFrameCount | read-only | mandatory | C10 Maximum Unknown Frame Count. This parameter MUST be less than or equal to 10. (See parameter C11) |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.4 | ColumnwflecOperConfigMaxUnknownFrameTime | read-only | mandatory | C11 Maximum Unknown Frame Time. This parameter MUST be greater than or equal to 1.0 seconds. Within the period of time defined by the Maximum Unknown Frame Tim… |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.5 | ColumnwflecOperConfigVccTimeoutPeriod | read-only | mandatory | C12 VCC Timeout Period. A LE Client may release any Data Direct or Multicast Send VCC that it has not used to transmit or receive any data frames for the lengt… |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.6 | ColumnwflecOperConfigMaxRetryCount | read-only | mandatory | C13 Maximum Retry Count. A LE CLient MUST not retry a LE-ARP for a given frame's LAN destination more than Maximum Retry Count times, after which it must disca… |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.7 | ColumnwflecOperConfigAgingTime | read-only | mandatory | C17 Aging Time. The maximum time that a LE Client will maintain an entry in its LE-ARP cache in the absence of a verification of that relationship. |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.8 | ColumnwflecOperConfigForwardDelayTime | read-only | mandatory | C18 Forward Delay Time. The maximum time that a LE Client will maintain an entry in its LE-ARP cache in the absence of a verification of that relationship, so … |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.9 | ColumnwflecOperConfigTopologyChange | read-only | mandatory | C19 Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Ageing Time C17, to age entries in its LE-ARP ca… |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.10 | ColumnwflecOperConfigExpectedArpResponseTime | read-only | mandatory | C20 Expected LE_ARP Reponse Time. The maximum time (seconds) that the LEC expects an LE_ARP_REQUEST/ LE_ARP_RESPONSE cycle to take. Used for retries and verifi… |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.11 | ColumnwflecOperConfigFlushTimeOut | read-only | mandatory | C21 Flush Time-out. Time limit (seconds) to wait to receive a LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been sent before taking recovery action. |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.12 | ColumnwflecOperConfigPathSwitchingDelay | read-only | mandatory | C22 Path Switching Delay. The time (seconds) since sending a frame to the BUS after which the LE Client may assume that the frame has been either discarded or … |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.13 | ColumnwflecOperConfigLocalSegmentID | read-only | mandatory | C23 Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridges.' |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.14 | ColumnwflecOperConfigMulticastSendType | read-only | mandatory | C24 Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. This is the method to be used … |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.15 | ColumnwflecOperConfigMulticastSendAvgRate | read-only | mandatory | C25 Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Sustai… |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.16 | ColumnwflecOperConfigMulticastSendPeakRate | read-only | mandatory | C26 Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Peak … |
| 1.3.6.1.4.1.18.3.5.9.5.20.3.1.17 | ColumnwflecOperConfigConnectionCompleteTimer | read-only | mandatory | C28 Connection Complete Timer. Optional. In Connection Establishment this is the time period in which data or a READY_IND message is expected from a Calling Pa… |
| 1.3.6.1.4.1.18.3.5.9.5.20.4 | TablewfAtmLecStatisticsTable | not-accessible | mandatory | Table of statistics |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1 | RowwfAtmLecStatisticsEntry | not-accessible | mandatory | Entry contains statistics for each LEC |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.1 | ColumnwflecArpRequestsOut | read-only | mandatory | The number of MAC-to-ATM ARP requests made by this LAN Emulation client over the LUNI associated with this emulated packet interface. |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.2 | ColumnwflecArpRequestsIn | read-only | mandatory | The number of MAC-to-ATM ARP requests received by this LAN Emulation client over the LUNI associated with this emulated packet interface. Requests may arrive o… |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.3 | ColumnwflecArpRepliesOut | read-only | mandatory | The number of MAC-to-ATM ARP replies sent by this LAN Emulation client over the LUNI associated with this emulated packet interface. |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.4 | ColumnwflecArpRepliesIn | read-only | mandatory | The number of MAC-to-ATM ARP replies received by this LAN Emulation client over the LUNI associated with this emulated packet interface. This count includes al… |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.5 | ColumnwflecControlFramesOut | read-only | mandatory | The total number of control packets sent by this LAN Emulation client over the LUNI associated with this emulated packet interface. |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.6 | ColumnwflecControlFramesIn | read-only | mandatory | The total number of control packets received by this LAN Emulation client over the LUNI associated with this emulated packet interface |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.7 | ColumnwflecSvcFailures | read-only | mandatory | The number of SVCs which this client tried to, but failed to, open. |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.8 | ColumnwflecStatisticsCct | read-only | mandatory | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.9 | ColumnwflecUnknownFramesDropped | read-only | mandatory | The number of frames that have been dropped due to unknown frame pacing. |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.10 | ColumnwflecInDataFrames | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.11 | ColumnwflecInUnicastFrames | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.12 | ColumnwflecInUnicastOctets | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.13 | ColumnwflecInMulticastFrames | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.14 | ColumnwflecInMulticastOctets | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.15 | ColumnwflecInBroadcastFrames | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.16 | ColumnwflecInBroadcastOctets | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.17 | ColumnwflecOutDataFrames | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.18 | ColumnwflecOutUnknownFrames | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.19 | ColumnwflecOutUnknownOctets | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.20 | ColumnwflecOutMulticastFrames | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.21 | ColumnwflecOutMulticastOctets | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.22 | ColumnwflecOutBroadcastFrames | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.23 | ColumnwflecOutBroadcastOctets | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.24 | ColumnwflecOutUnicastFrames | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.4.1.25 | ColumnwflecOutUnicastOctets | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.9.5.20.5 | TablewfAtmLecServerVccTable | not-accessible | mandatory | Lan Emulation Client - Server VCC Table |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1 | RowwfAtmLecServerVccEntry | not-accessible | mandatory | Entry contains statistics for each LEC |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.1 | ColumnwflecConfigDirectInterface | read-only | mandatory | The interface associated with the Configuration Direct VCC. If no Configuration Direct VCC exists, this object has the value 0. Otherwise, the objects ( wflecC… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.2 | ColumnwflecConfigDirectVpi | read-only | mandatory | If the Configuration Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, thi… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.3 | ColumnwflecConfigDirectVci | read-only | mandatory | If the Configuration Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, thi… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.4 | ColumnwflecControlDirectInterface | read-only | mandatory | The interface associated with the Control Direct VCC. If no Control Direct VCC exists, this object has the value 0. Otherwise, the objects ( wflecControlDirect… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.5 | ColumnwflecControlDirectVpi | read-only | mandatory | If the Control Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.6 | ColumnwflecControlDirectVci | read-only | mandatory | If the Control Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.7 | ColumnwflecControlDistributeInterface | read-only | mandatory | The interface associated with the Control Distribute VCC. If no Control Distribute VCC exists, this object has the value 0. Otherwise, the objects ( wflecContr… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.8 | ColumnwflecControlDistributeVpi | read-only | mandatory | If the Control Distribute VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this … |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.9 | ColumnwflecControlDistributeVci | read-only | mandatory | If the Control Distribute VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this … |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.10 | ColumnwflecMulticastSendInterface | read-only | mandatory | The interface associated with the Multicast Send VCC. If no Multicast Send VCC exists, this object has the value 0. Otherwise, the objects ( wflecMulticastSend… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.11 | ColumnwflecMulticastSendVpi | read-only | mandatory | If the Multicast Send VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.12 | ColumnwflecMulticastSendVci | read-only | mandatory | If the Multicast Send VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.13 | ColumnwflecMulticastForwardInterface | read-only | mandatory | The interface associated with the Multicast Forward VCC. If no Multicast Forward VCC exists, this object has the value 0. Otherwise, the objects ( wflecMultica… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.14 | ColumnwflecMulticastForwardVpi | read-only | mandatory | If the Multicast Forward VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this o… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.15 | ColumnwflecMulticastForwardVci | read-only | mandatory | If the Multicast Forward VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this o… |
| 1.3.6.1.4.1.18.3.5.9.5.20.5.1.16 | ColumnwflecServerVccCct | read-only | mandatory | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.6 | TablewfAtmLecAtmAddressTable | not-accessible | mandatory | LAN Emulation Client - ATM Addresses table |
| 1.3.6.1.4.1.18.3.5.9.5.20.6.1 | RowwfAtmLecAtmAddressEntry | not-accessible | mandatory | Entry contains ATM address for a LE CLient |
| 1.3.6.1.4.1.18.3.5.9.5.20.6.1.1 | ColumnwflecAtmAddress | read-only | mandatory | The ATM address this row describes. This could be either a primary address or a secondary address. |
| 1.3.6.1.4.1.18.3.5.9.5.20.6.1.2 | ColumnwflecAtmAddressStatus | read-write | mandatory | Used to create and delete rows in this table. A management station cannot disable an ATM address while the client is up |
| 1.3.6.1.4.1.18.3.5.9.5.20.6.1.3 | ColumnwflecAtmAddressCct | read-only | mandatory | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.7 | TablewfAtmLecMacAddressTable | not-accessible | mandatory | LAN Emulation Client - MAC Addresses table |
| 1.3.6.1.4.1.18.3.5.9.5.20.7.1 | RowwfAtmLecMacAddressEntry | not-accessible | mandatory | Entry contains MAC address for a LE CLient |
| 1.3.6.1.4.1.18.3.5.9.5.20.7.1.1 | ColumnwflecMacAddress | read-only | mandatory | The MAC address this row describes. This could be either a primary address or a secondary address. |
| 1.3.6.1.4.1.18.3.5.9.5.20.7.1.2 | ColumnwflecMacAddressAtmBinding | read-only | mandatory | The ATM Address registered for wflecMacAddress |
| 1.3.6.1.4.1.18.3.5.9.5.20.7.1.3 | ColumnwflecMacAddressCct | read-only | mandatory | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.8 | TablewfAtmLeArpTable | not-accessible | mandatory | Lan Emulation Client ARP Cache Group This table provides access to an ATM LAN Emulation Client's MAC-to-ATM ARP cache. It contains entries for unicast addresse… |
| 1.3.6.1.4.1.18.3.5.9.5.20.8.1 | RowwfAtmLeArpEntry | not-accessible | mandatory | entry of MAC address to ATM address |
| 1.3.6.1.4.1.18.3.5.9.5.20.8.1.1 | ColumnwfleArpMacAddress | read-only | mandatory | The MAC address for which this cache entry provides a translation. Since ATM LAN Emulation uses an ARP protocol to locate broadcast and multicast servers, the … |
| 1.3.6.1.4.1.18.3.5.9.5.20.8.1.2 | ColumnwfleArpAtmAddress | read-only | mandatory | The ATM address of the Broadcast & Unknown Server or LAN Emulation Client whose MAC address is stored in 'leArpMacAddress'. |
| 1.3.6.1.4.1.18.3.5.9.5.20.8.1.3 | ColumnwfleArpIsRemoteAddress | read-only | mandatory | Indicates whether the 'leArpMACaddress' belongs to a remote client. true(1) The address is believed to be remote - or its local/remote status is unknown. For a… |
| 1.3.6.1.4.1.18.3.5.9.5.20.8.1.4 | ColumnwfleArpEntryType | read-only | mandatory | Indicates how this LE_ARP table entry was created and whether it is aged. |
| 1.3.6.1.4.1.18.3.5.9.5.20.8.1.5 | ColumnwfleArpRowStatus | read-write | mandatory | Row status of enable or disable |
| 1.3.6.1.4.1.18.3.5.9.5.20.8.1.6 | ColumnwfleArpCct | read-only | mandatory | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.8.1.7 | ColumnwfleArpVpi | read-only | mandatory | This is the Vpi will be used for this MAC address |
| 1.3.6.1.4.1.18.3.5.9.5.20.8.1.8 | ColumnwfleArpVci | read-only | mandatory | This is the Vci will be used for this MAC address |
| 1.3.6.1.4.1.18.3.5.9.5.20.9 | TablewfAtmLeRDArpTable | not-accessible | mandatory | Lan Emulation Client RDArp Cache Group This table provides access to an ATM LAN Emulation Client's Route Descriptor-to-ATM ARP cache. |
| 1.3.6.1.4.1.18.3.5.9.5.20.9.1 | RowwfAtmLeRDArpEntry | not-accessible | mandatory | entry of Route Descriptor to ATM address |
| 1.3.6.1.4.1.18.3.5.9.5.20.9.1.1 | ColumnwfleRDArpSegmentID | read-only | mandatory | The LAN ID portion of the Route Descriptor associated with this ARP cache entry. |
| 1.3.6.1.4.1.18.3.5.9.5.20.9.1.2 | ColumnwfleRDArpBridgeNumber | read-only | mandatory | The Bridge Number portion of the Route Descriptor associated with this ARP cache entry. |
| 1.3.6.1.4.1.18.3.5.9.5.20.9.1.3 | ColumnwfleRDArpAtmAddress | read-only | mandatory | The ATM address of the LAN Emulation Client which is associated with the route descriptor. |
| 1.3.6.1.4.1.18.3.5.9.5.20.9.1.4 | ColumnwfleRDArpEntryType | read-only | mandatory | Indicates how this RD LE_ARP table entry was created and whether it is aged. |
| 1.3.6.1.4.1.18.3.5.9.5.20.9.1.5 | ColumnwfleRDArpRowStatus | read-write | mandatory | Row status of enable or disable |
| 1.3.6.1.4.1.18.3.5.9.5.20.9.1.6 | ColumnwfleRDArpCct | read-only | mandatory | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.9.1.7 | ColumnwfleRDArpVpi | read-only | mandatory | This is the Vpi will be used for this Route Descriptor |
| 1.3.6.1.4.1.18.3.5.9.5.20.9.1.8 | ColumnwfleRDArpVci | read-only | mandatory | This is the Vci will be used for this Route Descriptor |
| 1.3.6.1.4.1.18.3.5.9.5.20.10 | TablewfAtmLecConfigLesTable | not-accessible | mandatory | Address of Configured LES per LEC |
| 1.3.6.1.4.1.18.3.5.9.5.20.10.1 | RowwfAtmLecConfigLesEntry | not-accessible | mandatory | An entry in the ATM Le Table |
| 1.3.6.1.4.1.18.3.5.9.5.20.10.1.1 | ColumnwfAtmLecConfigLesDelete | read-write | mandatory | Create or Delete this LES Atm Address from the list |
| 1.3.6.1.4.1.18.3.5.9.5.20.10.1.2 | ColumnwfAtmLecConfigLesEnable | read-write | mandatory | Enable or disable this LES Atm Address |
| 1.3.6.1.4.1.18.3.5.9.5.20.10.1.3 | ColumnwfAtmLecConfigLesCct | read-only | mandatory | CCT number for this LEC |
| 1.3.6.1.4.1.18.3.5.9.5.20.10.1.4 | ColumnwfAtmLecConfigLesIndex | read-only | mandatory | a unique one up type number to create a list |
| 1.3.6.1.4.1.18.3.5.9.5.20.10.1.5 | ColumnwfAtmLecConfigLesAddress | read-write | mandatory | Atm address of the LES |
| 1.3.6.1.4.1.18.3.5.9.5.20.10.1.6 | ColumnwfAtmLecConfigLesName | read-write | mandatory | User name for the LES |