Wellfleet-ATM-MIB
945 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.23.1 | NodewfAtmCommonGroup | |||
| 1.3.6.1.4.1.18.3.4.23.1.1 | TablewfAtmInterfaceConfTable | not-accessible | mandatory | This table contains ATM local interface configuration parameters, one entry per ATM interface port, beyond those supported using the ifTable. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1 | RowwfAtmInterfaceConfEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.1 | ColumnwfAtmInterfaceConfDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.2 | ColumnwfAtmInterfaceConfIndex | read-only | mandatory | Uniquely identifies the interface (port) that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.3 | ColumnwfAtmInterfaceAdminStatus | read-write | mandatory | Specifies the desired administrative state of the Interface. The up and down states indicate that the traffic flow is enabled and disabled respectively for the… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.4 | ColumnwfAtmInterfaceOperStatus | read-only | mandatory | Indicates the current operational status of the Interface. The up and down states indicate that the Interface is currently operational, or not operational, res… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.5 | ColumnwfAtmInterfaceMaxVpcs | read-write | mandatory | The maximum number of VPCs supported at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.6 | ColumnwfAtmInterfaceMaxVccs | read-write | mandatory | The maximum number of VCCs supported at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.7 | ColumnwfAtmInterfaceConfVpcs | read-only | mandatory | The number of VPCs configured for use at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.8 | ColumnwfAtmInterfaceConfVccs | read-only | mandatory | The number of VCCs configured for use at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.9 | ColumnwfAtmInterfaceMaxActiveVpiBits | read-write | mandatory | The maximum number of active VPI bits configured for use at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.10 | ColumnwfAtmInterfaceMaxActiveVciBits | read-write | mandatory | The maximum number of active VCI bits configured for use at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.11 | ColumnwfAtmInterfaceIlmiVpi | read-write | mandatory | The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci are both equal to zero the… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.12 | ColumnwfAtmInterfaceIlmiVci | read-write | mandatory | The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci are both equal to zero the… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.13 | ColumnwfAtmInterfaceAddressType | read-only | mandatory | The type of ATM address configured for use at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.14 | ColumnwfAtmInterfaceCct | read-only | mandatory | The Wellfleet circuit number of this entry |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.15 | ColumnwfAtmInterfaceDrops | read-only | mandatory | The cumulative count of packet drops on this ATM Interface above the SSCS layer. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.16 | ColumnwfAtmInterfaceSigEnable | read-write | mandatory | Spawning of ATM Signalling by the Control gate is determined by this attr |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.17 | ColumnwfAtmInterfaceDebug | read-write | mandatory | This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging (default) 2 - enable Signalling Layer… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.18 | ColumnwfAtmInterfaceUseHwMacAddr | read-write | mandatory | If this is enabled, then the auto-generated ESI portion of the ATM address user suffix will be supplied by the hardware driver. If disabled, it will come from … |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.19 | ColumnwfAtmInterfaceHwMacOverride | read-write | mandatory | If wfAtmInterfaceUseHwMacAddr is disabled, this 48-bit Mac address will replace the hardware driver's address during auto-generation of the ESI portion of the … |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.20 | ColumnwfAtmServicePqOverride | read-write | mandatory | This value denotes whether driver level PQ is to be applied to packets or driver decides to use the priority set by service level PQ, if both service level and… |
| 1.3.6.1.4.1.18.3.4.23.1.2 | TablewfAtmServiceRecordTable | not-accessible | mandatory | This table contains ATM service record configuration parameters, one entry per ATM Wellfleet cct. |
| 1.3.6.1.4.1.18.3.4.23.1.2.1 | RowwfAtmServiceRecordEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.1 | ColumnwfAtmServiceRecordDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.2 | ColumnwfAtmServiceRecordEnable | read-write | mandatory | Enable/Disable MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.3 | ColumnwfAtmServiceRecordIndex | read-only | mandatory | Uniquely identifies the interface (port) that contains the appropriate port information. |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.4 | ColumnwfAtmServiceRecordCct | read-only | mandatory | The Wellfleet circuit number of this entry |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.5 | ColumnwfAtmServiceRecordAalEncapsType | read-write | mandatory | The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_SERVICEREC_ENCAPS_LLCENCAPS - RFC1483 … |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.6 | ColumnwfAtmServiceRecordState | read-only | mandatory | State of Service Record |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.7 | ColumnwfAtmServiceRecordVcType | read-write | mandatory | The type of VC for each encapsulation. Applicable for LLC and null type encapsulation enforced from SM - aks. 'muxedSvc' indicates SVCs that can be shared betw… |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.8 | ColumnwfAtmServiceRecordNetworkPrefix | read-write | mandatory | ATM Address Network portion |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.9 | ColumnwfAtmServiceRecordUserSuffix | read-write | mandatory | ATM Address User portion |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.10 | ColumnwfAtmServiceRecordAtmAddress | read-only | mandatory | ATM Address Complete - Inserted by Router after verification of network and user portions |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.11 | ColumnwfAtmServiceRecordFlag | read-write | mandatory | This will be used for internal purposes to have Site Manager flag specific configurations. |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.12 | ColumnwfAtmServiceRecordMtu | read-write | mandatory | The size of the largest packet to be used for send/receive on all logical interfaces defined on this service record. This attribute is an alias for 'ifMtu'. |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.13 | ColumnwfAtmServiceRecordLossPriorityPolicy | read-write | mandatory | This is relevant only for Frame Relay Switch product. This indicates the policy for translating FR DE to ATM CLP on IP truks over ATM. |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.14 | ColumnwfAtmServiceRecordDebug | read-write | mandatory | This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging (default) 2 - enable Service State Ma… |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.15 | ColumnwfAtmServiceRecordName | read-write | mandatory | User name for circuit |
| 1.3.6.1.4.1.18.3.4.23.1.2.1.16 | ColumnwfAtmServiceRecordWanSvcRoutingMode | read-write | mandatory | This applies ONLY to WAN SVC type ATM service records. It specifies the route updates mode for the WAN SVCs. |
| 1.3.6.1.4.1.18.3.4.23.1.5 | TablewfAtmVclConfTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.5.1 | RowwfAtmVclConfEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.1 | ColumnwfAtmVclConfDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.2 | ColumnwfAtmVclConfIndex | read-only | mandatory | Uniquely identifies the interface (port) that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.3 | ColumnwfAtmVclConfVpi | read-only | mandatory | The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVpiBits. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.4 | ColumnwfAtmVclConfVci | read-only | mandatory | The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVciBits. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.5 | ColumnwfAtmVclAdminStatus | read-write | mandatory | Specifies the desired administrative state of the VCL. The up and down states indicate that the traffic flow is enabled and disabled respectively for the VCL. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.6 | ColumnwfAtmVclOperStatus | read-only | mandatory | Indicates the current operational status of the VCL. The up and down states indicate that the VCL is currently operational, or not operational, respectively. T… |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.7 | ColumnwfAtmVclLastChange | read-only | mandatory | The value of MIBII's sysUpTime at the time this VCL entered its current operational state. If the current state was entered prior to the last re-initialization… |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.8 | ColumnwfAtmVclXmtPeakCellRate | read-write | mandatory | Transmit (Forward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.9 | ColumnwfAtmVclXmtSustainableCellRate | read-write | mandatory | Transmit (Forward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average ra… |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.10 | ColumnwfAtmVclXmtBurstSize | read-write | mandatory | Transmit (Forward) Burst Size in cells. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.11 | ColumnwfAtmVclXmtQosClass | read-write | mandatory | Transmit (Forward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.12 | ColumnwfAtmVclRcvPeakCellRate | read-write | mandatory | Receive (Backward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.13 | ColumnwfAtmVclRcvSustainableCellRate | read-write | mandatory | Receive (Backward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average ra… |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.14 | ColumnwfAtmVclRcvBurstSize | read-write | mandatory | Receive (Backward) Burst Size in cells. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.15 | ColumnwfAtmVclRcvQosClass | read-write | mandatory | Receive (Backward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.16 | ColumnwfAtmVclAalType | read-write | mandatory | The type of AAL used on the VCL. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.17 | ColumnwfAtmVclAalCpcsTransmitSduSize | read-write | mandatory | The maximum AAL CPCS SDU size in octets that is supported on the transmit direction of this VCC. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.18 | ColumnwfAtmVclAalCpcsReceiveSduSize | read-write | mandatory | The maximum AAL CPCS SDU size in octets that is supported on the receive direction of this VCC. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.19 | ColumnwfAtmVclAalEncapsType | read-write | mandatory | The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_VCLENCAPS_LLCENCAPS - RFC1483 ATM_VCLE… |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.20 | ColumnwfAtmVclCongestionIndication | read-write | mandatory | The desired state of the Congestion Indication (CI) bit in the payload field of each ATM cell for this VCL. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.21 | ColumnwfAtmVclCellLossPriority | read-write | mandatory | The desired state of the Cell Loss Priority (CLP) bit in the ATM header of each cell for this VCL. For 'drop-preference', the CLP bit will be set if the intern… |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.22 | ColumnwfAtmVclCct | read-write | mandatory | Identifies the object which corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.23 | ColumnwfAtmVclDirectAccessCct | read-write | mandatory | Circuit number to use for this VC for hybrid or direct access routing |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.24 | ColumnwfAtmVclMulticast | read-write | mandatory | Indicates whether this VPI/VCI is used for multicast or single destination. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.25 | ColumnwfAtmVclMode | read-write | mandatory | The mode of the given VC. GROUP - treats the VC as one of many vc's on a circuit. HYBRID - treats the VC as one of many vc's on a circuit for protocol traffic,… |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.26 | ColumnwfAtmVclDrops | read-only | mandatory | The total count of packets above the SSCS layer dropped on this VC |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.27 | ColumnwfAtmVclVcIndex | read-only | mandatory | Driver-defined VCI for quick table lookup |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.28 | ColumnwfAtmVclVcType | read-only | mandatory | Type of VC can be either permanent or switched. Only permanent VCs can be modfied. switchedMux is same as switched but is included here to be consistent with w… |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.29 | ColumnwfAtmVclXmtTagging | read-write | mandatory | Tagging forward VC messages if peak/sustainable rates exceeded |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.30 | ColumnwfAtmVclRcvTagging | read-write | mandatory | Tagging backward VC messages if peak/sustainable rates exceeded |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.31 | ColumnwfAtmVclOamLpbkEnable | read-write | mandatory | PVC OAM F5 Loopback function. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.32 | ColumnwfAtmVclOamLpbkCellInterval | read-write | mandatory | This is the time interval between two consecutive OAM loopback cells in numbers of second. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.33 | ColumnwfAtmVclOamLpbkThreshold1 | read-write | mandatory | This is the number of consecutive loopback OAM cells lost before the VC connection is declared down. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.34 | ColumnwfAtmVclOamLpbkThreshold2 | read-write | mandatory | This is the number of consecutive loopback OAM cells received before the VC connection is declared up. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.35 | ColumnwfAtmVclOamAlarmEnable | read-write | mandatory | PVC OAM F5 alarm function. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.36 | ColumnwfAtmVclVcGroup | read-write | mandatory | The group of VCs this VC is a member of. All VCs in a given group will have the same VcGroup. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.37 | ColumnwfAtmVclServiceClass | read-write | mandatory | The internal service class of the traffic this VC will carry |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.38 | ColumnwfAtmVclServiceCategory | read-write | mandatory | The service category for a connection. other cbr vbrRt vbrNRt abr ubr ubrplus Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.39 | ColumnwfAtmVclVBRType | read-write | mandatory | Type 1 VBR: CLP=0+1 cells are rescheduled by PCR or SCR according to the GCRA state. Type 2 VBR: CLP=0 cells are rescheduled by PCR or SCR according to the GCR… |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.40 | ColumnwfAtmVclXmtMinimumCellRate | read-write | mandatory | Transmit (Forward) Minimum Cell Rate in cells/second. This specifies the minimum cell rate required by an ATM connection (the source is always allowed to send … |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.41 | ColumnwfAtmVclXmtInitialCellRate | read-write | mandatory | Transmit (Forward) Initial Cell Rate in cells/second. The ICR is the rate at which the source should send initially and after an idle period. Note: May not be … |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.42 | ColumnwfAtmVclXmtRateIncreaseFactor | read-write | mandatory | Rate increase factor (RIF) controls the amount by which the cell Tx rate may increase upon receipt of an RM (Resource Management) cell. The value is a power of… |
| 1.3.6.1.4.1.18.3.4.23.1.5.1.43 | ColumnwfAtmVclXmtRateDecreaseFactor | read-write | mandatory | Rate decrease factor (RDF) controls the decrease in the cell Tx rate. The value is a power of 2 from 1/32768 to 1. Legal values are 0-15 (0==1, 15==1/32768). T… |
| 1.3.6.1.4.1.18.3.4.23.1.6 | TablewfAtmVclStatsTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.6.1 | RowwfAtmVclStatsEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.1 | ColumnwfAtmVclStatsIndex | read-only | mandatory | Uniquely identifies the interface that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.2 | ColumnwfAtmVclStatsVpi | read-only | mandatory | The Virtual Path Identifier (VPI) value of the VCL. |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.3 | ColumnwfAtmVclStatsVci | read-only | mandatory | The Virtual Channel Identifier (VCI) value of the VCL. |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.4 | ColumnwfAtmVclStatsVcIndex | read-only | mandatory | Uniquely identifies the virtual channel connection. |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.5 | ColumnwfAtmVclXmtCells | read-only | mandatory | Accumulated total of user cells transmitted for this VCL. This attribute is a 64-bit counter. Does not include OAM cells. |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.6 | ColumnwfAtmVclRcvCells | read-only | mandatory | Accumulated total of user cells received for this VCL. This attribute is a 64-bit counter. Does not include OAM cells. |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.7 | ColumnwfAtmVclRcvSequenceNumErrs | read-only | mandatory | Number of times data was being reassembled and a SAR Protocol Data Unit (PDU) was received out of order for this VCL. This count is valid only when the adaptat… |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.8 | ColumnwfAtmVclRcvInvalidLenErrs | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.9 | ColumnwfAtmVclRcvMissingEomErrs | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.10 | ColumnwfAtmVclRcvBufferOflowErrs | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.11 | ColumnwfAtmVclRcvMaxLenExceedErrs | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.12 | ColumnwfAtmVclRcvTrailerErrs | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.13 | ColumnwfAtmVclRcvAbortErrs | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.14 | ColumnwfAtmVclRcvPacketLengthErrs | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.15 | ColumnwfAtmVclRcvReassemAbortErrs | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.16 | ColumnwfAtmVclRcvCrcErrs | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.17 | ColumnwfAtmVclXmtOamCells | read-only | mandatory | Count of OAM cells transmitted successfully. |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.18 | ColumnwfAtmVclRcvOamCells | read-only | mandatory | Count of OAM cells received successfully. |
| 1.3.6.1.4.1.18.3.4.23.1.6.1.19 | ColumnwfAtmVclRcvOamCrcErrs | read-only | mandatory | Count of OAM cells received with CRC10 error. |
| 1.3.6.1.4.1.18.3.4.23.1.7 | TablewfAtmSigTable | not-accessible | mandatory | This table includes the ATM Signalling MIB record for Q.93B |
| 1.3.6.1.4.1.18.3.4.23.1.7.1 | RowwfAtmSigEntry | not-accessible | mandatory | This entry contains attributes needed for ATM Q.93B |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.1 | ColumnwfAtmSigDelete | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.2 | ColumnwfAtmSigDisable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.3 | ColumnwfAtmSigLineNumber | read-only | mandatory | Instance identifier. This value is the line number of the router. |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.4 | ColumnwfAtmSigAtmCct | read-only | mandatory | Circuit number of ATM driver associated with this Q.93B instance |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.5 | ColumnwfAtmSigState | read-only | mandatory | Indicates the state of the Q.93B entity |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.6 | ColumnwfAtmSigMaxServiceUsers | read-write | mandatory | Max number of SAPs (service access points) allowed for users to connect |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.7 | ColumnwfAtmSigMaxPtPtConnections | read-write | mandatory | Max number of simultaneous point to point connections allowed per port |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.8 | ColumnwfAtmSigMaxPtMultConnections | read-write | mandatory | Max number of simultaneous point to multipt connections allowed per port |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.9 | ColumnwfAtmSigMaxPartiesInMultConnect | read-write | mandatory | Max number of simultaneous parties in a point to multipoint connection |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.10 | ColumnwfAtmSigMaxRoutingRegistrations | read-write | mandatory | Max number of registrations / routing entries allowed per port |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.11 | ColumnwfAtmSigMinBufferThreshold | read-write | mandatory | Min percentage of buffer pool that must be free to enable new calls (sub) |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.12 | ColumnwfAtmSigTimerResolution | read-write | mandatory | Number of system ticks elapsed between successive timer events in tenths |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.13 | ColumnwfAtmSigVpi | read-write | mandatory | Virtual Path Identifier for the Signalling VC |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.14 | ColumnwfAtmSigVci | read-write | mandatory | Virtual Channel Identifier for the Signalling VC |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.15 | ColumnwfAtmSigStandard | read-write | mandatory | Sig Protocol Standard, Uni3.0, Uni3.1, or Trillium Symmetrical Uni (sub) |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.16 | ColumnwfAtmSigInterfaceType | read-write | mandatory | Network Interface type, either USER or NETWORK side (sub) |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.17 | ColumnwfAtmSigMinVciPtPt | read-write | mandatory | Minimum VCI number that can be associated with a Point to Point VC |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.18 | ColumnwfAtmSigMaxVciPtPt | read-write | mandatory | Maximum VCI number that can be associated with a Point to Point VC |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.19 | ColumnwfAtmSigMinVpiPtPt | read-write | mandatory | Minimum VPI number that can be associated with a Point to Point VC |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.20 | ColumnwfAtmSigMaxVpiPtPt | read-write | mandatory | Maximum VPI number that can be associated with a Point to Point VC |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.21 | ColumnwfAtmSigMinVciPtMltPt | read-write | mandatory | Minimum VCI number that can be associated with a Point to Multipoint VC |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.22 | ColumnwfAtmSigMaxVciPtMltPt | read-write | mandatory | Maximum VCI number that can be associated with a Point to Multipoint VC |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.23 | ColumnwfAtmSigMinVpiPtMltPt | read-write | mandatory | Minimum VPI number that can be associated with a Point to Multipoint VC |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.24 | ColumnwfAtmSigMaxVpiPtMltPt | read-write | mandatory | Maximum VPI number that can be associated with a Point to Multipoint VC |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.25 | ColumnwfAtmSigT303 | read-write | mandatory | Q.93B Setup Sent Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.26 | ColumnwfAtmSigT308 | read-write | mandatory | Q.93B Release Sent Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.27 | ColumnwfAtmSigT309 | read-write | mandatory | Q.93B - SAAL Data Link Connect Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.28 | ColumnwfAtmSigT310 | read-write | mandatory | Q.93B Call Proceeding Received Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.29 | ColumnwfAtmSigT313 | read-write | mandatory | Q.93B Connect Sent Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.30 | ColumnwfAtmSigT316 | read-write | mandatory | Q.93B Restart Request Sent on Interface Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.31 | ColumnwfAtmSigT316c | read-write | mandatory | Q.93B Restart Request Sent on Channel Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.32 | ColumnwfAtmSigT322 | read-write | mandatory | Q.93B Status Enquiry Sent Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.33 | ColumnwfAtmSigTDisc | read-write | mandatory | Q.93B SAAL Data Link Disconnect Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.34 | ColumnwfAtmSigT398 | read-write | mandatory | Q.93B Drop Party Sent Timer - Multipoint Connections only |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.35 | ColumnwfAtmSigT399 | read-write | mandatory | Q.93B Add Party Sent Timer - Multipoint Connections only |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.36 | ColumnwfAtmSigNumRst | read-write | mandatory | Number of restarts to be retransmitted before link considered down |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.37 | ColumnwfAtmSigNumStat | read-write | mandatory | Number of status enquiries to be retransmitted before link considered down |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.38 | ColumnwfAtmSigRestart | read-write | mandatory | Q.93B send restart when the link comes up. (sub) |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.39 | ColumnwfAtmSigDebug | read-write | mandatory | This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging 2 - Signalling Status events 42949672… |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.40 | ColumnwfAtmSigCallsSec | read-write | mandatory | The number of signaling messages per second allowed to flow out of the interface (call pacing). Zero turns this feature off. |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.41 | ColumnwfAtmSigT301 | read-write | mandatory | Q.93B Alert Received Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.42 | ColumnwfAtmSigT304 | read-write | mandatory | Q.93B Setup Ack Received Timer |
| 1.3.6.1.4.1.18.3.4.23.1.7.1.43 | ColumnwfAtmSigT397 | read-write | mandatory | Q.93B Alerting or Add Party Alterting Received Timer |
| 1.3.6.1.4.1.18.3.4.23.1.8 | TablewfAtmSscopTable | not-accessible | mandatory | This table includes the ATM SSCOP MIB record for Q.SAAL |
| 1.3.6.1.4.1.18.3.4.23.1.8.1 | RowwfAtmSscopEntry | not-accessible | mandatory | This entry contains attributes needed for ATM Q.SAAL |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.1 | ColumnwfAtmSscopDelete | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.2 | ColumnwfAtmSscopDisable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.3 | ColumnwfAtmSscopLineNumber | read-only | mandatory | Instance identifier. This value is the line number of the router. |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.4 | ColumnwfAtmSscopAtmCct | read-only | mandatory | Circuit number of ATM driver associated with this Q.SAAL instance |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.5 | ColumnwfAtmSscopState | read-only | mandatory | Indicates the state of the Q.SAAL entity |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.6 | ColumnwfAtmSscopLowThreshold | read-write | mandatory | Congestion is reached when % of buffer pool goes below this threshold (sub) |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.7 | ColumnwfAtmSscopUpThreshold | read-write | mandatory | Congestion is stopped when % of buffer pool goes above this threshold (sub) |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.8 | ColumnwfAtmSscopArbitration | read-write | mandatory | Determines if Q.SAAL initiates link connection or waits for connect (sub) |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.9 | ColumnwfAtmSscopPollTimer | read-write | mandatory | SSCOP Poll Timer. The Maximum time between transmission of a POLL PDU in tenths/sec |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.10 | ColumnwfAtmSscopKeepAliveTimer | read-write | mandatory | SSCOP Keep Alive Timer. If no pending SD or SDP PDU's transmit a POLL PDU in tenths/sec |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.11 | ColumnwfAtmSscopNoResponseTimer | read-write | mandatory | SSCOP No Response Timer. Max time between receipt of a STAT PDU in tenths/sec |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.12 | ColumnwfAtmSscopConnectControlTimer | read-write | mandatory | SSCOP CC Timer. Time between xmt of BGN, END as long as ACK not received in tenths/sec |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.13 | ColumnwfAtmSscopMaxCc | read-write | mandatory | SSCOP MaxCC. Maximum number of transmissions of a BGN, END or RS PDU. |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.14 | ColumnwfAtmSscopMaxPd | read-write | mandatory | SSCOP MaxPD. Maximum value of VT(PD) before transmitting POLL PDU. |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.15 | ColumnwfAtmSscopMaxStat | read-write | mandatory | SSCOP MaxSTAT. Maximum number of list elements permissible in a STAT PDU |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.16 | ColumnwfAtmSscopIdleTimer | read-write | mandatory | SSCOP Idle Timer. Timer used to determine when to enter the transient connection phase. Units in tenths/second. |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.17 | ColumnwfAtmSscopStandard | read-write | mandatory | SSCOP version switch. UNI_V30, UNI_V31 and UNI_V40 for now. Probably no more than this. |
| 1.3.6.1.4.1.18.3.4.23.1.8.1.18 | ColumnwfAtmSscopDebug | read-write | mandatory | This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging 2 - SSCOP Status events 4294967295 - … |
| 1.3.6.1.4.1.18.3.4.23.1.9 | TablewfAtmIlmiTable | not-accessible | mandatory | This table includes the ATM ILMI MIB record for UME/ILMI |
| 1.3.6.1.4.1.18.3.4.23.1.9.1 | RowwfAtmIlmiEntry | not-accessible | mandatory | This entry contains attributes needed for ATM UME/ILMI |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.1 | ColumnwfAtmIlmiDelete | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.2 | ColumnwfAtmIlmiDisable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.3 | ColumnwfAtmIlmiLineNumber | read-only | mandatory | Instance identifier. This value is the line number of the router. |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.4 | ColumnwfAtmIlmiAtmCct | read-only | mandatory | Circuit number of ATM driver associated with this UME/ILMI instance |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.5 | ColumnwfAtmIlmiState | read-only | mandatory | Indicates the state of the UME/ILMI entity |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.6 | ColumnwfAtmIlmiLowThreshold | read-write | mandatory | Congestion is reached when % of buffer pool goes below this threshold (sub) |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.7 | ColumnwfAtmIlmiUpThreshold | read-write | mandatory | Congestion is stopped when % of buffer pool goes above this threshold (sub) |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.8 | ColumnwfAtmIlmiVpi | read-write | mandatory | Virtual Path Identifier for the UME/ILMI VC |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.9 | ColumnwfAtmIlmiVci | read-write | mandatory | Virtual Channel Identifier for the UME/ILMI VC |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.10 | ColumnwfAtmIlmiInterfaceType | read-write | mandatory | Network Interface type, either USER or NETWORK side of the UME/ILMI |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.11 | ColumnwfAtmIlmiLocalPort | read-only | mandatory | AAL UME/ILMI local port identifier |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.12 | ColumnwfAtmIlmiRemotePort | read-only | mandatory | AAL UME/ILMI remote port identifier |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.13 | ColumnwfAtmIlmiGetTimer | read-write | mandatory | UME/ILMI Get request timer |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.14 | ColumnwfAtmIlmiGetRetryCnt | read-write | mandatory | Max number of retransmissions of the UME/ILMI GET request before link down |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.15 | ColumnwfAtmIlmiGetNextTimer | read-write | mandatory | UME/ILMI GetNext request timer |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.16 | ColumnwfAtmIlmiGetNextRetryCnt | read-write | mandatory | Max number of retransmits of the UME/ILMI GETNEXT request before link down |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.17 | ColumnwfAtmIlmiSetTimer | read-write | mandatory | UME/ILMI Set request timer |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.18 | ColumnwfAtmIlmiSetRetryCnt | read-write | mandatory | Max number of retransmissions of the UME/ILMI SET request before link down |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.19 | ColumnwfAtmIlmiLocalOid | read-only | mandatory | Identifies the OID of the first object in the standard DS1 or DS3 MIB corresponding to this ATM UNI port |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.20 | ColumnwfAtmIlmiDebug | read-write | mandatory | This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging 2 - ILMI Status events 4294967295 - A… |
| 1.3.6.1.4.1.18.3.4.23.1.9.1.21 | ColumnwfAtmIlmiNetPrefixTimer | read-write | mandatory | Time to wait for a Net prefix before restarting UME |
| 1.3.6.1.4.1.18.3.4.23.1.10 | TablewfAtmNetPrefixTable | not-accessible | mandatory | This table includes the ATM Network Address Prefix record |
| 1.3.6.1.4.1.18.3.4.23.1.10.1 | RowwfAtmNetPrefixEntry | not-accessible | mandatory | This entry contains attributes needed for a ATM Network Address Prefix |
| 1.3.6.1.4.1.18.3.4.23.1.10.1.1 | ColumnwfAtmNetPrefixPort | read-only | mandatory | Port which uniquely identifies the UNI (ie. InterfaceIndex or line number) |
| 1.3.6.1.4.1.18.3.4.23.1.10.1.2 | ColumnwfAtmNetPrefixPrefix | read-only | mandatory | Network Prefix used on this UNI |
| 1.3.6.1.4.1.18.3.4.23.1.10.1.3 | ColumnwfAtmNetPrefixStatus | read-only | mandatory | Status of Network Prefix (being used or not being used) |
| 1.3.6.1.4.1.18.3.4.23.1.11 | TablewfAtmTableDebugTable | not-accessible | mandatory | This is used to display the contents of internal ATM tables in the event log, for debug purposes. |
| 1.3.6.1.4.1.18.3.4.23.1.11.1 | RowwfAtmTableDebugEntry | not-accessible | mandatory | This entry contains attributes needed for debugging internal ATM tables. |
| 1.3.6.1.4.1.18.3.4.23.1.11.1.1 | ColumnwfAtmTableDebugDelete | read-write | mandatory | Create/Delete attribute. |
| 1.3.6.1.4.1.18.3.4.23.1.11.1.2 | ColumnwfAtmTableDebugSlot | read-only | mandatory | Slot that we want to dump ATM tables from. |
| 1.3.6.1.4.1.18.3.4.23.1.11.1.3 | ColumnwfAtmTableDebugType | read-write | mandatory | Slot that we want to dump ATM tables from. |
| 1.3.6.1.4.1.18.3.4.23.1.12 | TablewfAtmVcGroupTable | not-accessible | mandatory | This table contains VC grouping configuration paramters, one entry per VC group. |
| 1.3.6.1.4.1.18.3.4.23.1.12.1 | RowwfAtmVcGroupEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.1.12.1.1 | ColumnwfAtmVcGroupDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.1.12.1.2 | ColumnwfAtmVcGroupCct | read-only | mandatory | The circuit number that this VC group is configured for. |
| 1.3.6.1.4.1.18.3.4.23.1.12.1.3 | ColumnwfAtmVcGroupIndex | read-only | mandatory | Uniquely identifies the VC group on a given circuit |
| 1.3.6.1.4.1.18.3.4.23.1.12.1.4 | ColumnwfAtmVcGroupName | read-write | mandatory | The name for the VC group |
| 1.3.6.1.4.1.18.3.4.23.1.13 | TablewfAtmSVCOptionsTable | not-accessible | mandatory | This table contains ATM WAN SVC configuration parameters, one entry for each remote ATM destination for which user wishes to specify some/all of the VC config … |
| 1.3.6.1.4.1.18.3.4.23.1.13.1 | RowwfAtmSVCOptionsEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.1.13.1.1 | ColumnwfAtmSVCOptionsDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.1.13.1.2 | ColumnwfAtmSVCOptionsDisable | read-write | mandatory | Enable/Disable MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.1.13.1.3 | ColumnwfAtmSVCOptionsCct | read-only | mandatory | Circuit Number to which this SVC Options Entry belongs to. (Instance Id 1) |
| 1.3.6.1.4.1.18.3.4.23.1.13.1.4 | ColumnwfAtmSVCOptionsIndex | read-only | mandatory | Sequential index number assigned by configuration tool (Instance Id 2) |
| 1.3.6.1.4.1.18.3.4.23.1.13.1.5 | ColumnwfAtmSVCOptionsAdjHostAtmAddr | read-write | mandatory | ATM Address of the adjacent host to which these SVC config parameters apply. |
| 1.3.6.1.4.1.18.3.4.23.1.13.1.6 | ColumnwfAtmSVCOptionsXmtPeakCellRate | read-write | mandatory | Forward Peak Cell Rate (in cells/sec) of the SVC to this adjacent host |
| 1.3.6.1.4.1.18.3.4.23.1.13.1.7 | ColumnwfAtmSVCOptionsXmtSustCellRate | read-write | mandatory | Forward Sustainable Cell Rate (in cells/sec) of the SVC to this adjacent host |
| 1.3.6.1.4.1.18.3.4.23.1.13.1.8 | ColumnwfAtmSVCOptionsRcvPeakCellRate | read-write | mandatory | Backward Peak Cell Rate (in cells/sec) of the SVC to this adjacent host |
| 1.3.6.1.4.1.18.3.4.23.1.13.1.9 | ColumnwfAtmSVCOptionsRcvSustCellRate | read-write | mandatory | Backward Sustainable Cell Rate (in cells/sec) of the SVC to this adjacent host |
| 1.3.6.1.4.1.18.3.4.23.1.13.1.10 | ColumnwfAtmSVCOptionsName | read-write | mandatory | User name for SVC Options Record |
| 1.3.6.1.4.1.18.3.4.23.2 | NodewfAtmLinkModuleGroup | |||
| 1.3.6.1.4.1.18.3.4.23.2.1 | TablewfAtmAlcDrvTable | not-accessible | mandatory | This table contains line record entries for each driver responsible for the management and control of an ATM/ALC interface. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1 | RowwfAtmAlcDrvEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.1 | ColumnwfAtmAlcDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.2 | ColumnwfAtmAlcDisable | read-write | mandatory | Enable/disable driver parameter. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.3 | ColumnwfAtmAlcState | read-only | mandatory | Driver state parameter. This parameter does not represent the state of the physical interface! |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.4 | ColumnwfAtmAlcSlot | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.5 | ColumnwfAtmAlcPort | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.6 | ColumnwfAtmAlcCct | read-write | mandatory | Circuit number for the driver. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.7 | ColumnwfAtmAlcLineNumber | read-write | mandatory | Index value used to uniquely identify an instance of a physical ATM port. This index is generally chosen by SiteManager and shall be used as an instance identi… |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.8 | ColumnwfAtmAlcType | read-only | mandatory | The type of interface. This attribute is an alias for 'ifType. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.9 | ColumnwfAtmAlcMtu | read-only | mandatory | The size of the largest packet which can be sent/received on the interface, specified in octets. This attribute is an alias for 'ifMtu'. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.10 | ColumnwfAtmAlcSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in bits per second. This attribute is an alias for 'ifSpeed'. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.11 | ColumnwfAtmAlcLastChange | read-only | mandatory | The time (in hundreths of a second) since the network management portion of the system was last re-initialized. This attribute is an alias for 'ifLastChange' i… |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.12 | ColumnwfAtmAlcInterfaceStatus | read-only | mandatory | MIB-II ifOperStatus |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.13 | ColumnwfAtmAlcInterfaceIndex | read-only | mandatory | MIB-II interface index |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.14 | ColumnwfAtmAlcDpNotify | read-write | mandatory | Data Path (DP) notify function. This function, when enabled, will disable the DP interface when the physical interface becomes non-operational. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.15 | ColumnwfAtmAlcDpNotifyTimeout | read-write | mandatory | Data Path (DP) notify function timeout period. This value specifies the number of seconds to wait before implementing the DP notify function. A timer will get … |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.16 | ColumnwfAtmAlcConfControlQSize | read-write | mandatory | Number of command elements in each of the two Host Interface control qs |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.17 | ColumnwfAtmAlcConfIntqSize | read-write | mandatory | Number of elements in the Host Interface interrupt queue |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.18 | ColumnwfAtmAlcConfLogqSize | read-write | mandatory | Number of elements in the Host Interface log queue |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.19 | ColumnwfAtmAlcConfNumXmtQueues | read-write | mandatory | Number of transmit queues in the Host Interface between the Host Driver and the CoP Driver |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.20 | ColumnwfAtmAlcUseDebugger | read-write | mandatory | This attribute controls a debugger which may be built into the Coprocessor image. Shipped code does not include this debugger. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.21 | ColumnwfAtmAlcConfXmtClipSlotMax | read-write | mandatory | Number of frames the slot may queue up for transmit before the Host Driver begins to clip. Setting this attribute forces the driver to use the non zero value o… |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.22 | ColumnwfAtmAlcXmtClipSlotMax | read-only | mandatory | Number of buffers per slot beyond which the driver will clip on transmit. Set by the driver. May be forced by setting wfAtmAlcConfXmtClipSlotMax != 0 |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.23 | ColumnwfAtmAlcConfXmtClipQueueMax | read-write | mandatory | Number of frames a transmit queue may queue up before the Host Driver begins to clip. Setting this attribute forces the driver to use the non zero value of the… |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.24 | ColumnwfAtmAlcXmtClipQueueMax | read-only | mandatory | Number of buffers per transmit queue beyond which the driver will clip on transmit. Set by the driver. May be forced by setting wfAtmAlcConfXmtClipQueueMax != 0 |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.25 | ColumnwfAtmAlcConfXmtClipQueueMin | read-write | mandatory | Number of frames a transmit queue will always be permitted to queue up regardless of the current value of wfAtmOutQLen relative to wfAtmXmtClipSlotMax. Setting… |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.26 | ColumnwfAtmAlcXmtClipQueueMin | read-only | mandatory | Number of buffers each transmit queue is guaranteed to get before the driver clips due to the value of wfAtmXmtClipSlotMax. Set by the driver. May be forced by… |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.27 | ColumnwfAtmAlcXmtQueueBurst | read-write | mandatory | Burst count for all transmit queues in CoP. Specifies the number of buffer(ettes) the CoP will process from a transmit queue in one service opportunity. A valu… |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.28 | ColumnwfAtmAlcXmtPackets | read-only | mandatory | Count of Service Data Units (SDUs) transmitted without error. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.29 | ColumnwfAtmAlcXmtPacketClips | read-only | mandatory | Count of packets dropped on transmit. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.30 | ColumnwfAtmAlcXmtOctets | read-only | mandatory | Count of octets transmitted without error over the link interface. These octets are associated with user data only and not overhead or padding octets. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.31 | ColumnwfAtmAlcOutQLen | read-only | mandatory | This attribute is an alias for 'ifOutQLen' in the MIBII interface group. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.32 | ColumnwfAtmAlcRcvPackets | read-only | mandatory | Count of Service Data Units (SDUs) received without error. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.33 | ColumnwfAtmAlcRcvReplenMisses | read-only | mandatory | Number of packet buffer misses while attempting to replenish driver receive ring. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.34 | ColumnwfAtmAlcConfRcvBuffersMax | read-write | mandatory | Number of buffers the driver will try to maintain on its receive queue. Setting this attribute forces the driver to use the non zero value of the attribute rat… |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.35 | ColumnwfAtmAlcRcvBuffersMax | read-only | mandatory | Number of buffers which the driver will attempt to maintain on the receive queue. Set by the driver. May be forced by setting wfAtmAlcConfRcvBuffersMax != 0 |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.36 | ColumnwfAtmAlcMadrCt | read-only | mandatory | Number of PROM-based MAC addresses. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.37 | ColumnwfAtmAlcMadr | read-only | mandatory | First MAC address in canonical format (i.e., 00-00-a2...). The number of subsequent MAC addresses is specified by wfAtmAlcMadrCt which are sequential. |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.38 | ColumnwfAtmAlcVcInactEnable | read-write | mandatory | Inactivity timeout function. When this function is enabled, all activated VCs will be polled, at an interval specified by wfAtmAlcCopVcInactTimeout, for inacti… |
| 1.3.6.1.4.1.18.3.4.23.2.1.1.39 | ColumnwfAtmAlcXmtBadVcs | read-only | mandatory | Count of packets dropped on transmit because of an invalid VPI/VCI. |
| 1.3.6.1.4.1.18.3.4.23.2.2 | TablewfAtmAlcXmtqTable | not-accessible | mandatory | Object created by the Host Driver, one for each transmit queue |
| 1.3.6.1.4.1.18.3.4.23.2.2.1 | RowwfAtmAlcXmtqEntry | not-accessible | mandatory | An entry in the ATM Transmit Queue Table |
| 1.3.6.1.4.1.18.3.4.23.2.2.1.1 | ColumnwfAtmAlcXmtqIndex | read-only | mandatory | Uniquely identifies the interface (port) that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.2.2.1.2 | ColumnwfAtmAlcXmtqNumber | read-only | mandatory | Identifies a particular instance of a transmit queue. |
| 1.3.6.1.4.1.18.3.4.23.2.2.1.3 | ColumnwfAtmAlcXmtqState | read-only | mandatory | State of the transmit queue. |
| 1.3.6.1.4.1.18.3.4.23.2.2.1.4 | ColumnwfAtmAlcXmtqStickyMask | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.2.1.5 | ColumnwfAtmAlcXmtqVcs | read-only | mandatory | Number of Virtual Connections (VCs) configured for this queue. |
| 1.3.6.1.4.1.18.3.4.23.2.2.1.6 | ColumnwfAtmAlcXmtqOutQLen | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.2.1.7 | ColumnwfAtmAlcXmtqOctets | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.2.1.8 | ColumnwfAtmAlcXmtqPackets | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.2.1.9 | ColumnwfAtmAlcXmtqPacketClips | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.3 | TablewfAtmAlcCopConfTable | not-accessible | mandatory | This table contains basic CONFIGURATION information for the ATM/ALC CoProcessor (CoP) environment. |
| 1.3.6.1.4.1.18.3.4.23.2.3.1 | RowwfAtmAlcCopConfEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.2.3.1.1 | ColumnwfAtmAlcCopConfDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.2.3.1.2 | ColumnwfAtmAlcCopConfIndex | read-only | mandatory | Uniquely identifies the interface that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.2.3.1.3 | ColumnwfAtmAlcCopBufSize | read-write | mandatory | Size in bytes of buffer(ettes). |
| 1.3.6.1.4.1.18.3.4.23.2.3.1.4 | ColumnwfAtmAlcCopConfXmtBufs | read-write | mandatory | Percentage of transmit buffers to allocate in relation to the total packet memory size. |
| 1.3.6.1.4.1.18.3.4.23.2.3.1.5 | ColumnwfAtmAlcCopConfRcvBufs | read-write | mandatory | Percentage of receive buffers to allocate in relation to the total packet memory size. |
| 1.3.6.1.4.1.18.3.4.23.2.3.1.6 | ColumnwfAtmAlcCopDmaHighWatermark | read-write | mandatory | DMA FIFO high watermark. This value determines the mark upon which the DMA controller will generate an interrupt specifying FIFO 'almost full'. |
| 1.3.6.1.4.1.18.3.4.23.2.3.1.7 | ColumnwfAtmAlcCopDmaLowWatermark | read-write | mandatory | DMA FIFO low watermark. This value determines the mark upon which the DMA controller will generate an interrupt specifying FIFO 'almost empty'. |
| 1.3.6.1.4.1.18.3.4.23.2.3.1.8 | ColumnwfAtmAlcCopCacheControl | read-write | mandatory | Determines the state of the cache control register in the CoP. |
| 1.3.6.1.4.1.18.3.4.23.2.3.1.9 | ColumnwfAtmAlcCopHwModId | read-only | mandatory | Link module hardware identifier. Includes physical interface type. |
| 1.3.6.1.4.1.18.3.4.23.2.3.1.10 | ColumnwfAtmAlcCopVcInactTimeout | read-write | mandatory | Inactivity timeout value for all VCs on this interface in seconds. If no cells have been transmitted or received on an VC over the given timeout period then th… |
| 1.3.6.1.4.1.18.3.4.23.2.4 | TablewfAtmAlcCopHwTable | not-accessible | mandatory | This table contains hardware information relating to the ATM/ALC link module. |
| 1.3.6.1.4.1.18.3.4.23.2.4.1 | RowwfAtmAlcCopHwEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.2.4.1.1 | ColumnwfAtmAlcCopHwIndex | read-only | mandatory | Uniquely identifies the interface that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.2.4.1.2 | ColumnwfAtmAlcCopType | read-only | mandatory | CoProcessor type. |
| 1.3.6.1.4.1.18.3.4.23.2.4.1.3 | ColumnwfAtmAlcCopPktMemSize | read-only | mandatory | Size, in octets, of packet memory on the link module. |
| 1.3.6.1.4.1.18.3.4.23.2.4.1.4 | ColumnwfAtmAlcCopCtlMemSize | read-only | mandatory | Size, in octets, of control memory on the link module. |
| 1.3.6.1.4.1.18.3.4.23.2.4.1.5 | ColumnwfAtmAlcCopInsMemSize | read-only | mandatory | Size, in octets, of module memory on the link module. |
| 1.3.6.1.4.1.18.3.4.23.2.4.1.6 | ColumnwfAtmAlcCopAlcClockSpeed | read-only | mandatory | Clock speed of the Adaptation Layer Controller (ALC) device. |
| 1.3.6.1.4.1.18.3.4.23.2.4.1.7 | ColumnwfAtmAlcCopAlcVersion | read-only | mandatory | Revision of the Adaptation Layer Controller (ALC) device. |
| 1.3.6.1.4.1.18.3.4.23.2.4.1.8 | ColumnwfAtmAlcCopNtcVersion | read-only | mandatory | Revision of the Network Termination Controller (NTC) device. |
| 1.3.6.1.4.1.18.3.4.23.2.4.1.9 | ColumnwfAtmAlcCopAtcVersion | read-only | mandatory | Revision of the Address Translation Controller (ATC) device. |
| 1.3.6.1.4.1.18.3.4.23.2.5 | TablewfAtmAlcCopInfoTable | not-accessible | mandatory | This table contains general CoP information. |
| 1.3.6.1.4.1.18.3.4.23.2.5.1 | RowwfAtmAlcCopInfoEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.2.5.1.1 | ColumnwfAtmAlcCopInfoIndex | read-only | mandatory | Uniquely identifies the interface that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.2.5.1.2 | ColumnwfAtmAlcCopState | read-only | mandatory | State of the CoP driver. |
| 1.3.6.1.4.1.18.3.4.23.2.5.1.3 | ColumnwfAtmAlcCopConfigState | read-only | mandatory | State of the configuration process. The CoP driver performs a series of configuration events for all the major components on the link module. This state show w… |
| 1.3.6.1.4.1.18.3.4.23.2.5.1.4 | ColumnwfAtmAlcCopTotalBufs | read-only | mandatory | Total number of buffers available for use in packet memory. |
| 1.3.6.1.4.1.18.3.4.23.2.5.1.5 | ColumnwfAtmAlcCopTotalXmtBufs | read-only | mandatory | Number of buffers allocated for transmit. |
| 1.3.6.1.4.1.18.3.4.23.2.5.1.6 | ColumnwfAtmAlcCopTotalRcvBufs | read-only | mandatory | Number of buffers allocated for receive. |
| 1.3.6.1.4.1.18.3.4.23.2.6 | TablewfAtmAlcCopDataPathTable | not-accessible | mandatory | This table contains CoP data path statistics such as the number of packets, buffers, and cells transmitted and received. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1 | RowwfAtmAlcCopDataPathEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.1 | ColumnwfAtmAlcCopDataPathIndex | read-only | mandatory | Uniquely identifies the interface that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.2 | ColumnwfAtmAlcCopXmtPackets | read-only | mandatory | Total number of packets transferred to the link module. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.3 | ColumnwfAtmAlcCopXmtBuffers | read-only | mandatory | Total number of CoP buffers used for segmentation (transmit). |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.4 | ColumnwfAtmAlcCopXmtErrBuffers | read-only | mandatory | Total number of CoP transmit buffers returned in error by SAR device. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.5 | ColumnwfAtmAlcCopXmtCells | read-only | mandatory | Total number of assigned ATM layer cells transmitted at the transceiver transmit interface (T-count). This attribute is a 64-bit counter. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.6 | ColumnwfAtmAlcCopXmtUnassCells | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.7 | ColumnwfAtmAlcCopXmtIdleCells | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.8 | ColumnwfAtmAlcCopXmtUserCells | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.9 | ColumnwfAtmAlcCopXmtOctets | read-only | mandatory | Count of octets transmitted (segmented) successfully. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.10 | ColumnwfAtmAlcCopRcvPackets | read-only | mandatory | Total number of packets completely reassembled. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.11 | ColumnwfAtmAlcCopRcvClipPackets | read-only | mandatory | Total number of packets dropped because no host buffers available to hold the incoming data. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.12 | ColumnwfAtmAlcCopRcvBuffers | read-only | mandatory | Total number of CoP buffers used for reassembly. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.13 | ColumnwfAtmAlcCopRcvErrBuffers | read-only | mandatory | Total number of CoP receive buffers returned in error by SAR device. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.14 | ColumnwfAtmAlcCopRcvClipBuffers | read-only | mandatory | Total number of CoP buffers dropped because no receive buffer space were available to hold the incoming data. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.15 | ColumnwfAtmAlcCopRcvSarDropBuffers | read-only | mandatory | Total number of CoP buffers dropped by the SAR device. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.16 | ColumnwfAtmAlcCopRcvCells | read-only | mandatory | Total number of assigned ATM layer cells received at the transciever receive interface that have not been discarded (R-count). This attribute is a 64-bit count… |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.17 | ColumnwfAtmAlcCopRcvDropCells | read-only | mandatory | Total number of cells received at the transceiver receive interface that have been discarded (D-count). The cells may have been discarded due to the following … |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.18 | ColumnwfAtmAlcCopRcvUnassCells | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.19 | ColumnwfAtmAlcCopRcvIdleCells | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.20 | ColumnwfAtmAlcCopRcvUserCells | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.21 | ColumnwfAtmAlcCopRcvSarDropCells | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.22 | ColumnwfAtmAlcCopRcvOctets | read-only | mandatory | Count of octets received (reassembled) successfully. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.23 | ColumnwfAtmAlcCopXmtOamCells | read-only | mandatory | Count of OAM cells transmitted successfully. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.24 | ColumnwfAtmAlcCopRcvOamCells | read-only | mandatory | Count of OAM cells received successfully. |
| 1.3.6.1.4.1.18.3.4.23.2.6.1.25 | ColumnwfAtmAlcCopRcvOamCrcErrs | read-only | mandatory | Count of OAM cells received with CRC10 error. |
| 1.3.6.1.4.1.18.3.4.23.2.7 | TablewfAtmAlcCopErrorTable | not-accessible | mandatory | This table contains CoP error statistics. |
| 1.3.6.1.4.1.18.3.4.23.2.7.1 | RowwfAtmAlcCopErrorEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.1 | ColumnwfAtmAlcCopErrorIndex | read-only | mandatory | Uniquely identifies the interface that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.2 | ColumnwfAtmAlcCopHecDetects | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.3 | ColumnwfAtmAlcCopHecCorrects | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.4 | ColumnwfAtmAlcCopB2Febes | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.5 | ColumnwfAtmAlcCopB3Febes | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.6 | ColumnwfAtmAlcCopF1Febes | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.7 | ColumnwfAtmAlcCopF3Febes | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.8 | ColumnwfAtmAlcCopG1Febes | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.9 | ColumnwfAtmAlcCopDropIntqEvents | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.10 | ColumnwfAtmAlcCopDropLogqEvents | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.11 | ColumnwfAtmAlcCopDmaFifoOverruns | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.12 | ColumnwfAtmAlcCopDmaFifoUnderruns | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.13 | ColumnwfAtmAlcCopLossSignals | read-only | mandatory | Number of occurences of when the framer device detected loss of signal (i.e., no signal detect/no light). |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.14 | ColumnwfAtmAlcCopLossFrames | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.15 | ColumnwfAtmAlcCopLossPointers | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.16 | ColumnwfAtmAlcCopOutCellDelins | read-only | mandatory | Number of occurences of when the framer device went out of cell delineation. |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.17 | ColumnwfAtmAlcCopInCellDelins | read-only | mandatory | Number of occurences of when the framer device went into cell delineation. |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.18 | ColumnwfAtmAlcCopBufOverflows | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.19 | ColumnwfAtmAlcCopXmtQueueFulls | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.20 | ColumnwfAtmAlcCopXmtAtes | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.21 | ColumnwfAtmAlcCopRcvQueueEmptys | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.22 | ColumnwfAtmAlcCopRcvWriteFails | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.23 | ColumnwfAtmAlcCopRcvQueueFulls | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.7.1.24 | ColumnwfAtmAlcCopRcvAtes | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.2.8 | TablewfAtmAlcSarConfTable | not-accessible | mandatory | This table contains configuration information for the ATM/ALC SAR device. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1 | RowwfAtmAlcSarConfEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.1 | ColumnwfAtmAlcSarConfDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.2 | ColumnwfAtmAlcSarConfIndex | read-only | mandatory | Uniquely identifies the interface that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.3 | ColumnwfAtmAlcSarDmaBurstLength | read-write | mandatory | Limits the max number of SAR DMA access cycles in a single block. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.4 | ColumnwfAtmAlcSarDmaModeBw | read-write | mandatory | SAR memory interface width. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.5 | ColumnwfAtmAlcSarDmaModeBmode | read-write | mandatory | SAR memory control signal mode. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.6 | ColumnwfAtmAlcSarDmaModeOrder | read-write | mandatory | SAR memory byte ordering convention. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.7 | ColumnwfAtmAlcSarDmaModeMmode | read-write | mandatory | SAR memory mode. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.8 | ColumnwfAtmAlcSarDmaModeCmode | read-write | mandatory | SAR memory cycle time. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.9 | ColumnwfAtmAlcSarDmaModeSync | read-write | mandatory | READY/DTACK signal treatment. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.10 | ColumnwfAtmAlcSarControlRif | read-write | mandatory | Receive buffer ready interrupt frequency. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.11 | ColumnwfAtmAlcSarControlLoop | read-write | mandatory | Loop transmit cell stream into receive cell stream interface. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.12 | ColumnwfAtmAlcSarModeRtmr | read-write | mandatory | Receive routing tag length. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.13 | ColumnwfAtmAlcSarModeRid | read-write | mandatory | Reassembly ID select. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.14 | ColumnwfAtmAlcSarModeAal | read-write | mandatory | Default receive status/descriptor type field setting. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.15 | ColumnwfAtmAlcSarModeDmask | read-write | mandatory | Disable transmit queue masking. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.16 | ColumnwfAtmAlcSarModeDchain | read-write | mandatory | Transmit cell stream daisy chain enable. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.17 | ColumnwfAtmAlcSarModeSmode | read-write | mandatory | Receive streaming mode enable. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.18 | ColumnwfAtmAlcSarModeBchain | read-write | mandatory | Receive buffer chaining mode enable. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.19 | ColumnwfAtmAlcSarModeHec | read-write | mandatory | Header error check operation. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.20 | ColumnwfAtmAlcSarModeVpf | read-write | mandatory | Virtual path filter enable. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.21 | ColumnwfAtmAlcSarModeBas | read-write | mandatory | Buffer ageing support. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.22 | ColumnwfAtmAlcSarModeAm | read-write | mandatory | Traffic rate averaging method. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.23 | ColumnwfAtmAlcSarModeTrtl | read-write | mandatory | Transmit routing tag length. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.24 | ColumnwfAtmAlcSarTimeoutCtrPeriod | read-write | mandatory | Number of DCCK clock periods required to increment the receive buffer ageing time base counter. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.25 | ColumnwfAtmAlcSarTimeoutCtrInt | read-write | mandatory | Maximum time period allowed between the arrival of an incoming packet and the host servicing the receive buffer. |
| 1.3.6.1.4.1.18.3.4.23.2.8.1.26 | ColumnwfAtmAlcSarMaxReceivePktLen | read-write | mandatory | Maximum number of bytes of incoming packet data that can be received. |
| 1.3.6.1.4.1.18.3.4.23.2.9 | TablewfAtmAlcSarTrafficMgtTable | not-accessible | mandatory | This table contains information relating to the traffic management controller in the ATM/ALC SAR device. |
| 1.3.6.1.4.1.18.3.4.23.2.9.1 | RowwfAtmAlcSarTrafficMgtEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.2.9.1.1 | ColumnwfAtmAlcSarTrafficMgtDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.2.9.1.2 | ColumnwfAtmAlcSarTrafficMgtIndex | read-only | mandatory | Uniquely identifies the interface that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.2.9.1.3 | ColumnwfAtmAlcSarPeakCellRateEna | read-write | mandatory | Enable counter for SAR peak transmission rate. |
| 1.3.6.1.4.1.18.3.4.23.2.9.1.4 | ColumnwfAtmAlcSarAvgCellRateEna | read-write | mandatory | Enable counter for SAR average trasnmission rate. |
| 1.3.6.1.4.1.18.3.4.23.2.9.1.5 | ColumnwfAtmAlcSarPeakCellRate | read-write | mandatory | Desired value for SAR total peak cell rate (cells/second). |
| 1.3.6.1.4.1.18.3.4.23.2.9.1.6 | ColumnwfAtmAlcSarAvgCellRate | read-write | mandatory | Desired value for SAR total average cell rate (cells/second). |
| 1.3.6.1.4.1.18.3.4.23.2.9.1.7 | ColumnwfAtmAlcSarMaxBurstSize | read-write | mandatory | Desired value for SAR maximum burst size (cells). |
| 1.3.6.1.4.1.18.3.4.23.2.10 | TablewfAtmAlcSarRateQueueTable | not-accessible | mandatory | This table contains information relating to the peak rate queues provided by the ATM/ALC SAR device. |
| 1.3.6.1.4.1.18.3.4.23.2.10.1 | RowwfAtmAlcSarRateQueueEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.2.10.1.1 | ColumnwfAtmAlcSarRateQueueIndex | read-only | mandatory | Uniquely identifies the interface that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.2.10.1.2 | ColumnwfAtmAlcSarRateQueueNumber | read-only | mandatory | Identifies a particular instance of a rate queue. |
| 1.3.6.1.4.1.18.3.4.23.2.10.1.3 | ColumnwfAtmAlcSarRateQueueState | read-only | mandatory | Rate queue state parameter: enabled or disabled. |
| 1.3.6.1.4.1.18.3.4.23.2.10.1.4 | ColumnwfAtmAlcSarRateQueuePcr | read-only | mandatory | Peak Cell Rate (PCR) of rate queue defined in bits per second. |
| 1.3.6.1.4.1.18.3.4.23.2.10.1.5 | ColumnwfAtmAlcSarRateQueueVcs | read-only | mandatory | Number of Virtual Connections (VCs) configured for this queue. |
| 1.3.6.1.4.1.18.3.4.23.2.10.1.6 | ColumnwfAtmAlcSarRateQueueDef | read-only | mandatory | Indicates the method by which this queue was defined: IMPLICIT means that the driver defined the queue when a VC was added; EXPLICIT means that the queue was e… |
| 1.3.6.1.4.1.18.3.4.23.2.11 | TablewfAtmAlcFrmConfTable | not-accessible | mandatory | This table contains configuration information for the ATM/ALC FRAMER device. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1 | RowwfAtmAlcFrmConfEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.1 | ColumnwfAtmAlcFrmConfDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.2 | ColumnwfAtmAlcFrmConfIndex | read-only | mandatory | Uniquely identifies the interface that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.3 | ColumnwfAtmAlcFrmGenEnable | read-write | mandatory | Rx/Tx framer enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.4 | ColumnwfAtmAlcFrmGenFramingMode | read-write | mandatory | Framing (transceiver) mode. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.5 | ColumnwfAtmAlcFrmGenScramblerEna | read-write | mandatory | 1+x(6)+x(7) frame scrambler. Only applies to framing standards such as SONET/SDH. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.6 | ColumnwfAtmAlcFrmGenDescrambleEna | read-write | mandatory | 1+x(6)+x(7) frame descrambler. Only applies to framing standards such as SONET/SDH. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.7 | ColumnwfAtmAlcFrmGenLoopback | read-write | mandatory | Transmit to receive framer loopback. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.8 | ColumnwfAtmAlcFrmGenSyncFoundCnt | read-write | mandatory | Frame sync found count. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.9 | ColumnwfAtmAlcFrmGenSyncLostCnt | read-write | mandatory | Frame sync lost count. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.10 | ColumnwfAtmAlcFrmRcvCellEnable | read-write | mandatory | Cell receiver enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.11 | ColumnwfAtmAlcFrmRcvOamCrcCheck | read-write | mandatory | OAM cell CRC check. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.12 | ColumnwfAtmAlcFrmRcvOamCrcGen | read-write | mandatory | OAM cell CRC generate. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.13 | ColumnwfAtmAlcFrmRcvCellInsPrio | read-write | mandatory | Cell insert priority. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.14 | ColumnwfAtmAlcFrmRcvInsertPcr | read-write | mandatory | Peak cell insertion rate. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.15 | ColumnwfAtmAlcFrmRcvGfcIgnore | read-write | mandatory | GFC field ignore. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.16 | ColumnwfAtmAlcFrmRcvDescrambleCtl | read-write | mandatory | Descramble control. Only applies to framing standards such as SONET/SDH. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.17 | ColumnwfAtmAlcFrmRcvHecRcvMask | read-write | mandatory | HEC receive mask. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.18 | ColumnwfAtmAlcFrmRcvErrCorrectEna | read-write | mandatory | Error correction enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.19 | ColumnwfAtmAlcFrmRcvByteAlignment | read-write | mandatory | Byte alignment. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.20 | ColumnwfAtmAlcFrmRcvCellSyncFound | read-write | mandatory | Cell sync found count. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.21 | ColumnwfAtmAlcFrmRcvCellSyncLost | read-write | mandatory | Cell sync lost count. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.22 | ColumnwfAtmAlcFrmRcvExtUserCell | read-write | mandatory | Extract user defined cell. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.23 | ColumnwfAtmAlcFrmRcvExtMetaSig | read-write | mandatory | Extract meta signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.24 | ColumnwfAtmAlcFrmRcvExtBcastSig | read-write | mandatory | Extract broadcast signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.25 | ColumnwfAtmAlcFrmRcvExtPointSig | read-write | mandatory | Extract point-point signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.26 | ColumnwfAtmAlcFrmRcvExtIlmiSig | read-write | mandatory | Extract ILMI signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.27 | ColumnwfAtmAlcFrmRcvExtF4F5PrfMan | read-write | mandatory | Extract F4/F5 performance man. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.28 | ColumnwfAtmAlcFrmRcvExtF1F3PlOam | read-write | mandatory | Extract F1/F3 PL-OAM. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.29 | ColumnwfAtmAlcFrmRcvExtF4Segment | read-write | mandatory | Extract F4 segment (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.30 | ColumnwfAtmAlcFrmRcvExtF4EndEnd | read-write | mandatory | Extract F4 end-end (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.31 | ColumnwfAtmAlcFrmRcvExtF5Segment | read-write | mandatory | Extract F5 segment (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.32 | ColumnwfAtmAlcFrmRcvExtF5EndEnd | read-write | mandatory | Extract F5 end-end (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.33 | ColumnwfAtmAlcFrmRcvDisUserCell | read-write | mandatory | Discard user defined cell. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.34 | ColumnwfAtmAlcFrmRcvDisMetaSig | read-write | mandatory | Discard meta signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.35 | ColumnwfAtmAlcFrmRcvDisBcastSig | read-write | mandatory | Discard broadcast signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.36 | ColumnwfAtmAlcFrmRcvDisPointSig | read-write | mandatory | Discard point-point signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.37 | ColumnwfAtmAlcFrmRcvDisIlmiSig | read-write | mandatory | Discard ILMI signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.38 | ColumnwfAtmAlcFrmRcvDisUnassCell | read-write | mandatory | Discard unassigned cell. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.39 | ColumnwfAtmAlcFrmRcvDisF4Segment | read-write | mandatory | Discard F4 segment (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.40 | ColumnwfAtmAlcFrmRcvDisF4EndEnd | read-write | mandatory | Discard F4 end-end (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.41 | ColumnwfAtmAlcFrmRcvDisF5Segment | read-write | mandatory | Discard F5 segment (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.42 | ColumnwfAtmAlcFrmRcvDisF5EndEnd | read-write | mandatory | Discard F5 end-end (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.43 | ColumnwfAtmAlcFrmXmtCellEnable | read-write | mandatory | Cell transmitter enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.44 | ColumnwfAtmAlcFrmXmtOamCrcCheck | read-write | mandatory | OAM cell CRC check. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.45 | ColumnwfAtmAlcFrmXmtOamCrcGen | read-write | mandatory | OAM cell CRC generate. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.46 | ColumnwfAtmAlcFrmXmtCellInsPrio | read-write | mandatory | Cell insert priority. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.47 | ColumnwfAtmAlcFrmXmtInsertPcr | read-write | mandatory | Peak cell insertion rate. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.48 | ColumnwfAtmAlcFrmXmtGfcIgnore | read-write | mandatory | GFC field ignore. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.49 | ColumnwfAtmAlcFrmXmtCellDecouple | read-write | mandatory | Cell rate decoupling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.50 | ColumnwfAtmAlcFrmXmtScrambleCtl | read-write | mandatory | Scramble control. Only applies to framing standards such as SONET/SDH. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.51 | ColumnwfAtmAlcFrmXmtHecXmtMask | read-write | mandatory | HEC transmit mask. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.52 | ColumnwfAtmAlcFrmXmtExtUserCell | read-write | mandatory | Extract user defined cell. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.53 | ColumnwfAtmAlcFrmXmtExtMetaSig | read-write | mandatory | Extract meta signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.54 | ColumnwfAtmAlcFrmXmtExtBcastSig | read-write | mandatory | Extract broadcast signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.55 | ColumnwfAtmAlcFrmXmtExtPointSig | read-write | mandatory | Extract point-point signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.56 | ColumnwfAtmAlcFrmXmtExtIlmiSig | read-write | mandatory | Extract ILMI signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.57 | ColumnwfAtmAlcFrmXmtExtF4F5PrfMan | read-write | mandatory | Extract F4/F5 performance man. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.58 | ColumnwfAtmAlcFrmXmtExtF4Segment | read-write | mandatory | Extract F4 segment (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.59 | ColumnwfAtmAlcFrmXmtExtF4EndEnd | read-write | mandatory | Extract F4 end-end (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.60 | ColumnwfAtmAlcFrmXmtExtF5Segment | read-write | mandatory | Extract F5 segment (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.61 | ColumnwfAtmAlcFrmXmtExtF5EndEnd | read-write | mandatory | Extract F5 end-end (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.62 | ColumnwfAtmAlcFrmXmtDisUserCell | read-write | mandatory | Discard user defined cell. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.63 | ColumnwfAtmAlcFrmXmtDisMetaSig | read-write | mandatory | Discard meta signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.64 | ColumnwfAtmAlcFrmXmtDisBcastSig | read-write | mandatory | Discard broadcast signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.65 | ColumnwfAtmAlcFrmXmtDisPointSig | read-write | mandatory | Discard point-point signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.66 | ColumnwfAtmAlcFrmXmtDisIlmiSig | read-write | mandatory | Discard ILMI signalling. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.67 | ColumnwfAtmAlcFrmXmtDisUnassCell | read-write | mandatory | Discard unassigned cell. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.68 | ColumnwfAtmAlcFrmXmtDisF4Segment | read-write | mandatory | Discard F4 segment (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.69 | ColumnwfAtmAlcFrmXmtDisF4EndEnd | read-write | mandatory | Discard F4 end-end (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.70 | ColumnwfAtmAlcFrmXmtDisF5Segment | read-write | mandatory | Discard F5 segment (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.71 | ColumnwfAtmAlcFrmXmtDisF5EndEnd | read-write | mandatory | Discard F5 end-end (FM and AD). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.72 | ColumnwfAtmAlcFrmOamEnable | read-write | mandatory | OAM controller enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.73 | ColumnwfAtmAlcFrmOamInvertBip | read-write | mandatory | Invert BIP. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.74 | ColumnwfAtmAlcFrmOamTxPathFerf | read-write | mandatory | Tx path FERF. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.75 | ColumnwfAtmAlcFrmOamTxSectionFerf | read-write | mandatory | Tx section FERF. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.76 | ColumnwfAtmAlcFrmOamTxPathAis | read-write | mandatory | Tx path AIS. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.77 | ColumnwfAtmAlcFrmOamTxSectionAis | read-write | mandatory | Tx section AIS. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.78 | ColumnwfAtmAlcFrmOamTxPathFebe | read-write | mandatory | Tx path FEBE (B3). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.79 | ColumnwfAtmAlcFrmOamTxSectionFebe | read-write | mandatory | Tx section FEBE (B3). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.80 | ColumnwfAtmAlcFrmStatsSwEnable | read-write | mandatory | Switch statistics handler. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.81 | ColumnwfAtmAlcFrmStatsMode | read-write | mandatory | Statistics controller mode. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.82 | ColumnwfAtmAlcFrmStatsReceive | read-write | mandatory | Receive user statistics. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.83 | ColumnwfAtmAlcFrmStatsTransmit | read-write | mandatory | Transmit statistics. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.84 | ColumnwfAtmAlcFrmStatsMask | read-write | mandatory | VP/VC filter mask. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.85 | ColumnwfAtmAlcFrmStatsTimeout | read-write | mandatory | Statistics DMA transfer timeout. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.86 | ColumnwfAtmAlcFrmStatsTimerEna | read-write | mandatory | Timer enable (DMA). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.87 | ColumnwfAtmAlcFrmStatsOflowEna | read-write | mandatory | Overflow enable (DMA). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.88 | ColumnwfAtmAlcFrmStatsForceDma | read-write | mandatory | Force DMA transfer. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.89 | ColumnwfAtmAlcFrmCsiEnable | read-write | mandatory | Cell stream enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.90 | ColumnwfAtmAlcFrmCsiLoop | read-write | mandatory | CSI rx/tx loopback. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.91 | ColumnwfAtmAlcFrmCsiRcvAtcEnable | read-write | mandatory | Receive ATC enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.92 | ColumnwfAtmAlcFrmCsiRcvAte | read-write | mandatory | Address translation error (receive). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.93 | ColumnwfAtmAlcFrmCsiRcvClpBitOpt | read-write | mandatory | CLP bit option (receive). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.94 | ColumnwfAtmAlcFrmCsiRcvCongBitOpt | read-write | mandatory | PLT congestion bit option (receive). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.95 | ColumnwfAtmAlcFrmCsiRoutingTag | read-write | mandatory | Routing tag byte size. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.96 | ColumnwfAtmAlcFrmCsiXmtAtcEnable | read-write | mandatory | Transmit ATC enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.97 | ColumnwfAtmAlcFrmCsiXmtAte | read-write | mandatory | Address translation error (transmit). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.98 | ColumnwfAtmAlcFrmCsiXmtClpBitOpt | read-write | mandatory | CLP bit option (transmit). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.99 | ColumnwfAtmAlcFrmCsiXmtCongBitOpt | read-write | mandatory | PLT congestion bit option (transmit). |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.100 | ColumnwfAtmAlcFrmCsiOmitHec | read-write | mandatory | Omit HEC byte on transmit. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.101 | ColumnwfAtmAlcFrmCsiRcvHecEnable | read-write | mandatory | HEC generator enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.102 | ColumnwfAtmAlcFrmCsiRcvHecMask | read-write | mandatory | ASCI rx path HEC mask. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.103 | ColumnwfAtmAlcFrmDmaChan0Enable | read-write | mandatory | DMA channel 0 enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.104 | ColumnwfAtmAlcFrmDmaChan1Enable | read-write | mandatory | DMA channel 1 enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.105 | ColumnwfAtmAlcFrmDmaChan2Enable | read-write | mandatory | DMA channel 2 enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.106 | ColumnwfAtmAlcFrmDmaChan3Enable | read-write | mandatory | DMA channel 3 enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.107 | ColumnwfAtmAlcFrmDmaChan4Enable | read-write | mandatory | DMA channel 4 enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.108 | ColumnwfAtmAlcFrmDmaChan5Enable | read-write | mandatory | DMA channel 5 enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.109 | ColumnwfAtmAlcFrmDmaEnable | read-write | mandatory | DMA controller enable. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.110 | ColumnwfAtmAlcFrmDmaStop | read-write | mandatory | DMA stop. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.111 | ColumnwfAtmAlcFrmDmaPrioritySel | read-write | mandatory | Priority select. |
| 1.3.6.1.4.1.18.3.4.23.2.11.1.112 | ColumnwfAtmAlcFrmDmaFastXferMode | read-write | mandatory | Fast transfer mode. |
| 1.3.6.1.4.1.18.3.4.23.3 | NodewfAtmCellSwitchGroup | |||
| 1.3.6.1.4.1.18.3.4.23.3.1 | TablewfAtmizerCfgTable | not-accessible | mandatory | ARE ATMizer Configuration Record |
| 1.3.6.1.4.1.18.3.4.23.3.1.1 | RowwfAtmizerCfgEntry | not-accessible | mandatory | Information about a Transmit/Receive pair of ATMizers |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.1 | ColumnwfAtmizerCfgSlot | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.2 | ColumnwfAtmizerCfgMaxVcl | read-only | mandatory | The maximum size of a Virtual Channel Links (VCLs) which can be supported by the ATMizers. |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.3 | ColumnwfAtmizerCfgCurrVcl | read-only | mandatory | The number of Virtual Channel Links (VCLs) currently active on the slot. |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.4 | ColumnwfAtmizerCfgRxQueueLenMax | read-write | mandatory | The maximum size of a receive buffer list which will be delivered by the RX ATMizer to the driver. |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.5 | ColumnwfAtmizerCfgRxQueueTmoMax | read-write | mandatory | The maximum amount of idle time (in microseconds) the RX ATMizer will wait before delivering its queue of receive buffers to the driver. |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.6 | ColumnwfAtmizerCfgRxBuffersMax | read-write | mandatory | The maximum number of receive buffers which the RX ATMizer can own before encountering a lack of resources. This is a configurable option and does not indicate… |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.7 | ColumnwfAtmizerCfgRxPagesMax | read-write | mandatory | The maximum number of additional physical pages which the RX ATMizer can own before encountering a lack of resources. This is a configurable option and does no… |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.8 | ColumnwfAtmizerCfgTxBuffersMax | read-write | mandatory | The maximum number of transmit buffers which the TX ATMizer can own before it begins clipping. This is a configurable option and does not indicate the true val… |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.9 | ColumnwfAtmizerCfgTxPagesMax | read-write | mandatory | The maximum number of additional physical pages which the TX ATMizer can own before encountering a lack of resources. This is a configurable option and does no… |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.10 | ColumnwfAtmizerCfgTxPercentRsrcs | read-write | mandatory | The maximum percentage of transmit buffers which the transmit driver can hold before it begins clipping. This is a configurable option and does not indicate th… |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.11 | ColumnwfAtmizerCfgHeartbeatPeriod | read-write | mandatory | The timer period, in seconds, which defines how often heartbeat messages are sent to the ATMizers. |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.12 | ColumnwfAtmizerRxBuffersMax | read-only | mandatory | The maximum number of receive buffers which the RX ATMizer can own before encountering a lack of resources. This value indicates the true value of the Rx buffe… |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.13 | ColumnwfAtmizerRxPagesMax | read-only | mandatory | The maximum number of additional physical pages which the RX ATMizer can own before encountering a lack of resources. This value indicates the true value of th… |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.14 | ColumnwfAtmizerTxBuffersMax | read-only | mandatory | The maximum number of transmit buffers which the TX ATMizer can own before it begins clipping. This value indicates the true value of the Tx buffers available. |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.15 | ColumnwfAtmizerTxPagesMax | read-only | mandatory | The maximum number of additional physical pages which the TX ATMizer can own before encountering a lack of resources. This value indicates the true value of th… |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.16 | ColumnwfAtmizerTxPercentRsrcs | read-only | mandatory | The maximum percentage of transmit buffers which the transmit driver can hold before it begins clipping. |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.17 | ColumnwfAtmizerTxPerVcClipEnable | read-write | mandatory | Enable/disable Transmit per-VC buffer clipping threshold |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.18 | ColumnwfAtmizerCfgTxVcBuffersMax | read-write | mandatory | The maximum number of buffers which the TX ATMizer can queue for a particular virtual connection before clipping. This is a configurable option and does not in… |
| 1.3.6.1.4.1.18.3.4.23.3.1.1.19 | ColumnwfAtmizerTxVcBuffersMax | read-only | mandatory | The maximum number of buffers which the TX ATMizer can queue for a particular virtual connection before clipping. |
| 1.3.6.1.4.1.18.3.4.23.3.2 | TablewfAtmizerDrvCfgTable | not-accessible | mandatory | ATMizer Line Driver Configuration Record |
| 1.3.6.1.4.1.18.3.4.23.3.2.1 | RowwfAtmizerDrvCfgEntry | not-accessible | mandatory | Information about a particular driver |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.1 | ColumnwfAtmizerDrvCfgDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.2 | ColumnwfAtmizerDrvCfgEnable | read-write | mandatory | Enable/disable driver parameter. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.3 | ColumnwfAtmizerDrvCfgState | read-only | mandatory | Driver state parameter. This parameter does not represent the state of the physical interface! |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.4 | ColumnwfAtmizerDrvCfgSlot | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.5 | ColumnwfAtmizerDrvCfgPort | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.6 | ColumnwfAtmizerDrvCfgCct | read-write | mandatory | Circuit number for the driver. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.7 | ColumnwfAtmizerDrvCfgLineNumber | read-write | mandatory | The LineNumber is an Index value used to uniquely identify an instance of a physical ATM port. This value shall be used as an instance identifier for ATM MIB o… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.8 | ColumnwfAtmizerDrvCfgType | read-only | mandatory | The type of interface. This attribute is an alias for 'ifType. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.9 | ColumnwfAtmizerDrvCfgMtu | read-write | mandatory | The size of the largest packet which can be sent/received on the interface, specified in octets. This attribute is an alias for 'ifMtu'. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.10 | ColumnwfAtmizerDrvCfgSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in bits per second. This attribute is an alias for 'ifSpeed'. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.11 | ColumnwfAtmizerDrvCfgDpNotify | read-write | mandatory | Data Path (DP) notify function. This function, when enabled, will disable the DP interface when the physical interface becomes non-operational. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.12 | ColumnwfAtmizerDrvCfgDpNotifyTimeout | read-write | mandatory | Data Path (DP) notify function timeout period. This value specifies the number of seconds to wait before implementing the DP notify function. A timer will get … |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.13 | ColumnwfAtmizerDrvCfgVcInactEnable | read-write | mandatory | Inactivity timeout value for all SVCs on this interface in seconds. If no cells have been transmitted or received on an SVC over the given timeout period then … |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.14 | ColumnwfAtmizerDrvCfgVcInactTimeout | read-write | mandatory | Inactivity timeout value for all SVCs on this interface in seconds. If no cells have been transmitted or received on an SVC over the given timeout period then … |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.15 | ColumnwfAtmizerDrvCfgMadrCt | read-only | mandatory | Number of PROM-based MAC addresses. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.16 | ColumnwfAtmizerDrvCfgMadr | read-only | mandatory | First MAC address in canonical format (i.e., 00-00-a2...). The number of subsequent MAC addresses is specified by wfAtmizerDrvCfgMadrCt which are sequential. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.17 | ColumnwfAtmizerDrvCfgFramingMode | read-write | mandatory | The framing (transceiver) mode for the physical interface |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.18 | ColumnwfAtmizerDrvCfgClkSource | read-write | mandatory | Source of the physical interface clocking signal, either internal or external. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.19 | ColumnwfAtmizerDrvCfgLogLevel | read-write | mandatory | Bit mask which controls the amount of logging done by the ATM driver. If a bit in the mask is set, it enables logging of an event class. If a bit is cleared, i… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.20 | ColumnwfAtmizerDrvCfgDsx3SendCode | read-write | mandatory | This variable indicates what type of code is being sent across DS3/E3 interface by the device. (These are optional for E3 interfaces.) The values mean: ATM_DSX… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.21 | ColumnwfAtmizerDrvCfgDsx3LoopbackConfig | read-write | mandatory | This variable represents the loopback configuration of the DS3/E3 interface. Ther values mean: ATM_DSX3_LOOPBACK_NONE : Not in the loopback state/ A device tha… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.22 | ColumnwfAtmizerDrvCfgDs3Scrambling | read-write | mandatory | This variable represents if scrambling is turned on or off |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.23 | ColumnwfAtmizerDrvCfgDs3LineBuildOut | read-write | mandatory | This variable represents the Line Build Out for the DS3 short and long cables. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.24 | ColumnwfAtmizerDrvCfgModule | read-only | mandatory | Module number for ASN type platforms. For non-ASN platforms this attribute will not be used. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.25 | ColumnwfAtmizerFramingMode | read-only | mandatory | The actual framing (transceiver) mode for the physical interface |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.26 | ColumnwfAtmizerDrvCfgIwfCct | read-write | mandatory | This variable represents the circuit number associated with FR/ATM Interworking Service record. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.27 | ColumnwfAtmizerDrvCfgCcType | read-write | mandatory | Which one is the Call Control module, ATM or MPLS? |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.28 | ColumnwfAtmizerDrvCfgMaxVcls | read-only | mandatory | The maximum number of Virtual Channel Links (VCLs) that are supported at the ATM driver interface. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.29 | ColumnwfAtmizerDrvCfgCurrVcls | read-only | mandatory | The number of Virtual Channel Links (VCLs) currently active. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.30 | ColumnwfAtmizerDrvCfgScrSum | read-only | mandatory | Total sum of all VC Sustainable Cell Rates (SCR). Used for Call Admission Control (CAC). |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.31 | ColumnwfAtmizerDrvCfgExtRate | read-write | mandatory | A user specified value for line speed which, if non-zero, will be reported as ifEntry.ifSpeed. It has no effect on operation of the interface. |
| 1.3.6.1.4.1.18.3.4.23.3.3 | TablewfAtmizerIntfStatsTable | not-accessible | mandatory | ARE Line Driver Statistics Record |
| 1.3.6.1.4.1.18.3.4.23.3.3.1 | RowwfAtmizerIntfStatsEntry | not-accessible | mandatory | Information about a particular driver |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.1 | ColumnwfAtmizerIntfSlot | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.2 | ColumnwfAtmizerIntfPort | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.3 | ColumnwfAtmizerIntfLastChange | read-only | mandatory | The time (in hundreths of a second) since the network management portion of the system was last re-initialized. This attribute is an alias for 'ifLastChange' i… |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.4 | ColumnwfAtmizerIntfOutQLen | read-only | mandatory | This attribute is an alias for 'ifOutQLen' in the MIBII interface group. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.5 | ColumnwfAtmizerIntfStatus | read-only | mandatory | MIB-II ifOperStatus |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.6 | ColumnwfAtmizerIntfIndex | read-only | mandatory | MIB-II interface index |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.7 | ColumnwfAtmizerIntfOcdEvents | read-only | mandatory | The number of times the Out of Cell Delineation (OCD) events occur. If seven consecutive ATM cells have Header Error Control (HEC) violations, an OCD event occ… |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.8 | ColumnwfAtmizerIntfTcAlarmState | read-only | mandatory | This variable indicates if there is an alarm present for the TC sublayer. The value ATM_LCD_FAILURE indicates that a Loss of Cell Delineation (LCD) failure sta… |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.9 | ColumnwfAtmizerIntfRxPacketsOkWrap | read-only | mandatory | The number of times the wfAtmizerIntfRxPacketsOk counter has wrapped. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.10 | ColumnwfAtmizerIntfRxPacketsOk | read-only | mandatory | The number of Service Data Units (SDUs) received without error. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.11 | ColumnwfAtmizerIntfRxCellsOkWrap | read-only | mandatory | The number of times the wfAtmizerIntfRxCellsOk counter has wrapped. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.12 | ColumnwfAtmizerIntfRxCellsOk | read-only | mandatory | The number of reassembled Service Data Unit (SDU) cells received without error. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.13 | ColumnwfAtmizerIntfRxOamCount | read-only | mandatory | The number of F4/F5 OAM Cells received on this interface. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.14 | ColumnwfAtmizerIntfRxFlowCtrlCount | read-only | mandatory | The number of Flow Control OAM Cells received on this interface. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.15 | ColumnwfAtmizerIntfRxInvalidHeaders | read-only | mandatory | The number of receive cells dropped because of bad header fields (invalid VPI/VCI, non-zero GFC, bad PTI field). |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.16 | ColumnwfAtmizerIntfRxOverSizedSDUs | read-only | mandatory | The number of receive packets dropped because the reassembled SDU was greater than the MTU for this interface. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.17 | ColumnwfAtmizerIntfRxCrcErrors | read-only | mandatory | The number of received cells dropped because of an invalid CRC. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.18 | ColumnwfAtmizerIntfRxCrc10Errors | read-only | mandatory | The number of OAM cells dropped because of an invalid CRC-10. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.19 | ColumnwfAtmizerIntfRxLackBufCredits | read-only | mandatory | The number of received packets lost on this interface because no receive buffer space was available to the receiver for incoming data. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.20 | ColumnwfAtmizerIntfRxLackPageCredits | read-only | mandatory | The number of received packets lost on this interface because no physical pages were available to the receiver for incoming data. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.21 | ColumnwfAtmizerIntfRxLackBufResc | read-only | mandatory | The number of received packets lost on this interface because there were no free system buffers available. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.22 | ColumnwfAtmizerIntfRxLackPageResc | read-only | mandatory | The number of received packets lost on this interface because there were no free system pages available. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.23 | ColumnwfAtmizerIntfTxPacketsOkWrap | read-only | mandatory | The number of times the wfAtmizerIntfTxPacketsOk counter has wrapped. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.24 | ColumnwfAtmizerIntfTxPacketsOk | read-only | mandatory | The number of Service Data Units (SDUs) transmitted without error. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.25 | ColumnwfAtmizerIntfTxCellsOkWrap | read-only | mandatory | The number of times the wfAtmizerIntfTxCellsOk counter has wrapped. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.26 | ColumnwfAtmizerIntfTxCellsOk | read-only | mandatory | The number of segmented Service Data Unit (SDU) cells transmitted without error. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.27 | ColumnwfAtmizerIntfTxOamCount | read-only | mandatory | The number of F4/F5 OAM Cells transmitted on this interface. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.28 | ColumnwfAtmizerIntfTxFlowCtrlCount | read-only | mandatory | The number of Flow Control OAM Cells transmitted on this interface. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.29 | ColumnwfAtmizerIntfTxBadVcs | read-only | mandatory | Count of packets dropped on transmit because of an invalid VPI/VCI. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.30 | ColumnwfAtmizerIntfTxOverSizedSDUs | read-only | mandatory | The number of transmit packets dropped because their SDU size was greater than the MTU for this interface. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.31 | ColumnwfAtmizerIntfTxLackBufCredits | read-only | mandatory | The number of transmit packets lost on this interface because no buffer space was available to the transmitter for outgoing data. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.32 | ColumnwfAtmizerIntfTxLackPageCredits | read-only | mandatory | The number of transmit packets lost on this interface because no physical pages were available to the transmitter for outgoing data. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.33 | ColumnwfAtmizerIntfTxDrvClipCount | read-only | mandatory | The number of transmit packets lost on this interface because no buffer space was available to the host transmit driver for outgoing data. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.34 | ColumnwfAtmizerIntfHecDetectedCount | read-only | mandatory | Number of uncorrectable HEC errors detected on this interface. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.35 | ColumnwfAtmizerIntfHecCorrectedCount | read-only | mandatory | Number of correctable HEC errors detected on this interface. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.36 | ColumnwfAtmizerIntfRxOctets | read-only | mandatory | Count of octets received successfully. Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.37 | ColumnwfAtmizerIntfTxOctets | read-only | mandatory | Count of octets transmitted successfully. Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.38 | ColumnwfAtmizerIntfRxUTOPIAErrors | read-only | mandatory | Count of cells dropped as a result of UTOPIA parity errors or state machine errors (short or long cells). Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.39 | ColumnwfAtmizerIntfRxLengthErrors | read-only | mandatory | Count of Rx length errors. AAL5 CPCS-PDU length violation. Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.40 | ColumnwfAtmizerIntfRxAbortMessages | read-only | mandatory | Count of abort messages received (AAL5 length field equals 0). Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.3.1.41 | ColumnwfAtmizerIntfRxSequenceNumberErrors | read-only | mandatory | Count of AAL1 sequence number errors. Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.4 | TablewfAtmizerVclStatsTable | not-accessible | mandatory | Virtual Channel Statistics Record |
| 1.3.6.1.4.1.18.3.4.23.3.4.1 | RowwfAtmizerVclStatsEntry | not-accessible | mandatory | Information about a particular virtual channel |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.1 | ColumnwfAtmizerVclIndex | read-only | mandatory | Instance id - Index number of this physical interface. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.2 | ColumnwfAtmizerVclVpi | read-only | mandatory | Instance id - Virtual Path Id for this VCL. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.3 | ColumnwfAtmizerVclVci | read-only | mandatory | Instance id - Virtual Channel Id for this VCL. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.4 | ColumnwfAtmizerVclRxPacketsOkWrap | read-only | mandatory | Number of times the wfAtmizerVclRxPacketsOk has wrapped. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.5 | ColumnwfAtmizerVclRxPacketsOk | read-only | mandatory | Number of packets received on this VCL. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.6 | ColumnwfAtmizerVclRxCellsOkWrap | read-only | mandatory | Number of times the wfAtmizerVclRxCellsOk has wrapped. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.7 | ColumnwfAtmizerVclRxCellsOk | read-only | mandatory | Number of cells received on this VCL. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.8 | ColumnwfAtmizerVclRxOamCount | read-only | mandatory | The number of OAM cells received on this VCL. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.9 | ColumnwfAtmizerVclRxFlowCtrlCount | read-only | mandatory | The number of Flow Control cells received on this VCL. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.10 | ColumnwfAtmizerVclRxInvalidHeaders | read-only | mandatory | The number of receive cells dropped because of an invalid ATM header. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.11 | ColumnwfAtmizerVclRxOverSizedSDUs | read-only | mandatory | The number of receive packets dropped on this VCL because the reassembled SDU was greater than the MTU for this interface. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.12 | ColumnwfAtmizerVclRxCrcErrors | read-only | mandatory | The number of received cells dropped on this VCL because of an invalid CRC. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.13 | ColumnwfAtmizerVclRxCrc10Errors | read-only | mandatory | The number of OAM cells dropped on this VCL because of an invalid CRC-10. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.14 | ColumnwfAtmizerVclRxLackBufCredits | read-only | mandatory | The number of received packets lost on this VCL because no receive buffer space was available to the receiver for incoming data. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.15 | ColumnwfAtmizerVclRxLackPageCredits | read-only | mandatory | The number of received packets lost on this VCL because no physical pages were available to the receiver for incoming data. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.16 | ColumnwfAtmizerVclRxLackBufResc | read-only | mandatory | The number of received packets lost on this VCL because there were no free system buffers available. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.17 | ColumnwfAtmizerVclRxLackPageResc | read-only | mandatory | The number of received packets lost on this VCL because there were no free system pages available. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.18 | ColumnwfAtmizerVclTxPacketsOkWrap | read-only | mandatory | Number of times the wfAtmizerVclTxPacketsOk has wrapped. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.19 | ColumnwfAtmizerVclTxPacketsOk | read-only | mandatory | Number of packets transmitted on this VCL. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.20 | ColumnwfAtmizerVclTxCellsOkWrap | read-only | mandatory | Number of times the wfAtmizerVclTxCellsOk has wrapped. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.21 | ColumnwfAtmizerVclTxCellsOk | read-only | mandatory | Number of cells transmitted on this VCL. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.22 | ColumnwfAtmizerVclTxOamCount | read-only | mandatory | The number of OAM cells transmitted on this VCL. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.23 | ColumnwfAtmizerVclTxFlowCtrlCount | read-only | mandatory | The number of Flow Control cells received on this VCL. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.24 | ColumnwfAtmizerVclTxOverSizedSDUs | read-only | mandatory | The number of transmit packets dropped on this VCL because their SDU size was greater than the MTU for this interface. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.25 | ColumnwfAtmizerVclTxLackBufCredits | read-only | mandatory | The number of transmit packets lost on this VCL because no buffer space was available to the transmitter for outgoing data. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.26 | ColumnwfAtmizerVclTxLackPageCredits | read-only | mandatory | The number of transmit packets lost on this VCL because no physical pages were available to the transmitter for outgoing data. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.27 | ColumnwfAtmizerVclRxOctets | read-only | mandatory | Count of octets received successfully. Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.28 | ColumnwfAtmizerVclTxOctets | read-only | mandatory | Count of octets transmitted successfully. Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.29 | ColumnwfAtmizerVclTxClipFrames | read-only | mandatory | Number of frames clipped (dropped) due to transmit congestion. Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.30 | ColumnwfAtmizerVclRxLengthErrors | read-only | mandatory | Count of Rx length errors. AAL5 CPCS-PDU length violation. Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.31 | ColumnwfAtmizerVclRxAbortMessages | read-only | mandatory | Count of abort messages received (AAL5 length field equals 0). Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.4.1.32 | ColumnwfAtmizerVclRxSequenceNumberErrors | read-only | mandatory | Count of AAL1 sequence number errors. Note: May not be supported on all ATM-based platforms. |
| 1.3.6.1.4.1.18.3.4.23.3.5 | TablewfAtmizerDebugTable | not-accessible | mandatory | ARE ATMizer Debug Record |
| 1.3.6.1.4.1.18.3.4.23.3.5.1 | RowwfAtmizerDebugEntry | not-accessible | mandatory | Information about a Transmit/Receive pair of ATMizers |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.1 | ColumnwfAtmizerDebugSlot | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.2 | ColumnwfAtmizerDebugCmd | read-write | mandatory | Debug command to be issued to ATMizers. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.3 | ColumnwfAtmizerDebugCmdSize | read-write | mandatory | Number of parameters to the debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.4 | ColumnwfAtmizerDebugParam1 | read-write | mandatory | The first parameter to the ATMizer debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.5 | ColumnwfAtmizerDebugParam2 | read-write | mandatory | The second parameter to the ATMizer debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.6 | ColumnwfAtmizerDebugParam3 | read-write | mandatory | The third parameter to the ATMizer debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.7 | ColumnwfAtmizerDebugParam4 | read-write | mandatory | The fourth parameter to the ATMizer debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.8 | ColumnwfAtmizerDebugParam5 | read-write | mandatory | The fifth parameter to the ATMizer debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.9 | ColumnwfAtmizerDebugParam6 | read-write | mandatory | The sixth parameter to the ATMizer debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.10 | ColumnwfAtmizerDebugParam7 | read-write | mandatory | The seventh parameter to the ATMizer debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.11 | ColumnwfAtmizerDebugParam8 | read-write | mandatory | The eighth parameter to the ATMizer debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.12 | ColumnwfAtmizerDebugParam9 | read-write | mandatory | The nineth parameter to the ATMizer debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.13 | ColumnwfAtmizerDebugParam10 | read-write | mandatory | The tenth parameter to the ATMizer debug command. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.14 | ColumnwfAtmizerDebugRxDone | read-write | mandatory | Completion flag indicating that the RX ATMizer has completed the debug command and the result is available in wfAtmizerDebugRxValue. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.15 | ColumnwfAtmizerDebugRxValue | read-write | mandatory | The result of the RX ATMizer debug operation. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.16 | ColumnwfAtmizerDebugTxDone | read-write | mandatory | Completion flag indicating that the TX ATMizer has completed the debug command and the result is available in wfAtmizerDebugTxValue. |
| 1.3.6.1.4.1.18.3.4.23.3.5.1.17 | ColumnwfAtmizerDebugTxValue | read-write | mandatory | The result of the TX ATMizer debug operation. |
| 1.3.6.1.4.1.18.3.4.24.1 | TablewfSonetMediumTable | not-accessible | mandatory | Statistics for the SONET medium table |
| 1.3.6.1.4.1.18.3.4.24.1.1 | RowwfSonetMediumEntry | not-accessible | mandatory | An entry in the medium table |
| 1.3.6.1.4.1.18.3.4.24.1.1.1 | ColumnwfSonetMediumIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.1.1.2 | ColumnwfSonetMediumType | read-only | mandatory | This variable identifies whether a SONET or a SDH signal is used across this interface. |
| 1.3.6.1.4.1.18.3.4.24.1.1.3 | ColumnwfSonetMediumTimeElapsed | read-only | mandatory | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.18.3.4.24.1.1.4 | ColumnwfSonetMediumValidIntervals | read-only | mandatory | The number of previous intervals for which valid data has been stored. |
| 1.3.6.1.4.1.18.3.4.24.1.1.5 | ColumnwfSonetMediumLineCoding | read-only | mandatory | This variable describes the line coding for this interface. |
| 1.3.6.1.4.1.18.3.4.24.1.1.6 | ColumnwfSonetMediumLineType | read-only | mandatory | This variable describes the line type for this interface. |
| 1.3.6.1.4.1.18.3.4.24.1.1.7 | ColumnwfSonetMediumCircuitIdentifier | read-only | mandatory | This variable contains the transmission vendor's circuit identifier. |
| 1.3.6.1.4.1.18.3.4.24.2 | TablewfSonetSectionCurrentTable | not-accessible | mandatory | Statistics for the SONET section current table |
| 1.3.6.1.4.1.18.3.4.24.2.1 | RowwfSonetSectionCurrentEntry | not-accessible | mandatory | An entry in the Section current table |
| 1.3.6.1.4.1.18.3.4.24.2.1.1 | ColumnwfSonetSectionCurrentIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.2.1.2 | ColumnwfSonetSectionCurrentStatus | read-only | mandatory | This variable is a bitmask indicating the status of the interface. |
| 1.3.6.1.4.1.18.3.4.24.2.1.3 | ColumnwfSonetSectionCurrentESs | read-only | mandatory | The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.2.1.4 | ColumnwfSonetSectionCurrentSESs | read-only | mandatory | The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.2.1.5 | ColumnwfSonetSectionCurrentSEFSs | read-only | mandatory | The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.2.1.6 | ColumnwfSonetSectionCurrentCVs | read-only | mandatory | The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.3 | TablewfSonetSectionIntervalTable | not-accessible | mandatory | Statistics for the SONET section interval table |
| 1.3.6.1.4.1.18.3.4.24.3.1 | RowwfSonetSectionIntervalEntry | not-accessible | mandatory | An entry in the Section Interval table |
| 1.3.6.1.4.1.18.3.4.24.3.1.1 | ColumnwfSonetSectionIntervalIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.3.1.2 | ColumnwfSonetSectionIntervalNumber | read-only | mandatory | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.18.3.4.24.3.1.3 | ColumnwfSonetSectionIntervalESs | read-only | mandatory | The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.3.1.4 | ColumnwfSonetSectionIntervalSESs | read-only | mandatory | The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.3.1.5 | ColumnwfSonetSectionIntervalSEFSs | read-only | mandatory | The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.3.1.6 | ColumnwfSonetSectionIntervalCVs | read-only | mandatory | The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.4 | TablewfSonetLineCurrentTable | not-accessible | mandatory | Statistics for the SONET line current table |
| 1.3.6.1.4.1.18.3.4.24.4.1 | RowwfSonetLineCurrentEntry | not-accessible | mandatory | An entry in the Line current table |
| 1.3.6.1.4.1.18.3.4.24.4.1.1 | ColumnwfSonetLineCurrentIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.4.1.2 | ColumnwfSonetLineCurrentStatus | read-only | mandatory | This variable is a bitmask indicating the status of the interface. |
| 1.3.6.1.4.1.18.3.4.24.4.1.3 | ColumnwfSonetLineCurrentESs | read-only | mandatory | The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.4.1.4 | ColumnwfSonetLineCurrentSESs | read-only | mandatory | The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.4.1.5 | ColumnwfSonetLineCurrentCVs | read-only | mandatory | The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.4.1.6 | ColumnwfSonetLineCurrentUASs | read-only | mandatory | The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.5 | TablewfSonetLineIntervalTable | not-accessible | mandatory | Statistics for the SONET line interval table |
| 1.3.6.1.4.1.18.3.4.24.5.1 | RowwfSonetLineIntervalEntry | not-accessible | mandatory | An entry in the Line Interval table |
| 1.3.6.1.4.1.18.3.4.24.5.1.1 | ColumnwfSonetLineIntervalIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.5.1.2 | ColumnwfSonetLineIntervalNumber | read-only | mandatory | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.18.3.4.24.5.1.3 | ColumnwfSonetLineIntervalESs | read-only | mandatory | The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.5.1.4 | ColumnwfSonetLineIntervalSESs | read-only | mandatory | The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.5.1.5 | ColumnwfSonetLineIntervalCVs | read-only | mandatory | The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.5.1.6 | ColumnwfSonetLineIntervalUASs | read-only | mandatory | The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.6 | TablewfSonetFarEndLineCurrentTable | not-accessible | mandatory | Statistics for the SONET far end line current table |
| 1.3.6.1.4.1.18.3.4.24.6.1 | RowwfSonetFarEndLineCurrentEntry | not-accessible | mandatory | An entry in the FarEndLine current table |
| 1.3.6.1.4.1.18.3.4.24.6.1.1 | ColumnwfSonetFarEndLineCurrentIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.6.1.2 | ColumnwfSonetFarEndLineCurrentESs | read-only | mandatory | The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.6.1.3 | ColumnwfSonetFarEndLineCurrentSESs | read-only | mandatory | The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.6.1.4 | ColumnwfSonetFarEndLineCurrentCVs | read-only | mandatory | The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.6.1.5 | ColumnwfSonetFarEndLineCurrentUASs | read-only | mandatory | The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.7 | TablewfSonetFarEndLineIntervalTable | not-accessible | mandatory | Statistics for the SONET far end line interval table |
| 1.3.6.1.4.1.18.3.4.24.7.1 | RowwfSonetFarEndLineIntervalEntry | not-accessible | mandatory | An entry in the FarEndLine Interval table |
| 1.3.6.1.4.1.18.3.4.24.7.1.1 | ColumnwfSonetFarEndLineIntervalIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.7.1.2 | ColumnwfSonetFarEndLineIntervalNumber | read-only | mandatory | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.18.3.4.24.7.1.3 | ColumnwfSonetFarEndLineIntervalESs | read-only | mandatory | The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.7.1.4 | ColumnwfSonetFarEndLineIntervalSESs | read-only | mandatory | The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.7.1.5 | ColumnwfSonetFarEndLineIntervalCVs | read-only | mandatory | The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.7.1.6 | ColumnwfSonetFarEndLineIntervalUASs | read-only | mandatory | The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.8 | TablewfSonetPathCurrentTable | not-accessible | mandatory | Statistics for the SONET path current table |
| 1.3.6.1.4.1.18.3.4.24.8.1 | RowwfSonetPathCurrentEntry | not-accessible | mandatory | An entry in the Path current table |
| 1.3.6.1.4.1.18.3.4.24.8.1.1 | ColumnwfSonetPathCurrentIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.8.1.2 | ColumnwfSonetPathCurrentWidth | read-only | mandatory | A value that indicates the type of the SONET/SDH Path. |
| 1.3.6.1.4.1.18.3.4.24.8.1.3 | ColumnwfSonetPathCurrentStatus | read-only | mandatory | This variable is a bitmask indicating the status of the interface. |
| 1.3.6.1.4.1.18.3.4.24.8.1.4 | ColumnwfSonetPathCurrentESs | read-only | mandatory | The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.8.1.5 | ColumnwfSonetPathCurrentSESs | read-only | mandatory | The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.8.1.6 | ColumnwfSonetPathCurrentCVs | read-only | mandatory | The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.8.1.7 | ColumnwfSonetPathCurrentUASs | read-only | mandatory | The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Path in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.9 | TablewfSonetPathIntervalTable | not-accessible | mandatory | Statistics for the SONET path interval table |
| 1.3.6.1.4.1.18.3.4.24.9.1 | RowwfSonetPathIntervalEntry | not-accessible | mandatory | An entry in the Path Interval table |
| 1.3.6.1.4.1.18.3.4.24.9.1.1 | ColumnwfSonetPathIntervalIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.9.1.2 | ColumnwfSonetPathIntervalNumber | read-only | mandatory | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.18.3.4.24.9.1.3 | ColumnwfSonetPathIntervalESs | read-only | mandatory | The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.9.1.4 | ColumnwfSonetPathIntervalSESs | read-only | mandatory | The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.9.1.5 | ColumnwfSonetPathIntervalCVs | read-only | mandatory | The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.9.1.6 | ColumnwfSonetPathIntervalUASs | read-only | mandatory | The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Path in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.10 | TablewfSonetFarEndPathCurrentTable | not-accessible | mandatory | Statistics for the SONET far end path current table |
| 1.3.6.1.4.1.18.3.4.24.10.1 | RowwfSonetFarEndPathCurrentEntry | not-accessible | mandatory | An entry in the Far End Path current table |
| 1.3.6.1.4.1.18.3.4.24.10.1.1 | ColumnwfSonetFarEndPathCurrentIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.10.1.2 | ColumnwfSonetFarEndPathCurrentESs | read-only | mandatory | The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.10.1.3 | ColumnwfSonetFarEndPathCurrentSESs | read-only | mandatory | The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.10.1.4 | ColumnwfSonetFarEndPathCurrentCVs | read-only | mandatory | The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.10.1.5 | ColumnwfSonetFarEndPathCurrentUASs | read-only | mandatory | The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path in the current 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.11 | TablewfSonetFarEndPathIntervalTable | not-accessible | mandatory | Statistics for the SONET far end path interval table |
| 1.3.6.1.4.1.18.3.4.24.11.1 | RowwfSonetFarEndPathIntervalEntry | not-accessible | mandatory | An entry in the Far End Path Interval table |
| 1.3.6.1.4.1.18.3.4.24.11.1.1 | ColumnwfSonetFarEndPathIntervalIndex | read-only | mandatory | Index for this physical Sonet interface. |
| 1.3.6.1.4.1.18.3.4.24.11.1.2 | ColumnwfSonetFarEndPathIntervalNumber | read-only | mandatory | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.18.3.4.24.11.1.3 | ColumnwfSonetFarEndPathIntervalESs | read-only | mandatory | The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Path in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.11.1.4 | ColumnwfSonetFarEndPathIntervalSESs | read-only | mandatory | The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.11.1.5 | ColumnwfSonetFarEndPathIntervalCVs | read-only | mandatory | The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Path in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.4.24.11.1.6 | ColumnwfSonetFarEndPathIntervalUASs | read-only | mandatory | The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path in a particular 15 minute interval. |
| 1.3.6.1.4.1.18.3.5.9.5.1 | NodewfAtm | |||
| 1.3.6.1.4.1.18.3.5.9.5.1.1 | ScalarwfAtmDelete | read-write | mandatory | Indication to create or delete an ATM Base record. |
| 1.3.6.1.4.1.18.3.5.9.5.1.2 | ScalarwfAtmInterfaceNumber | read-only | mandatory | Number of ATM interfaces in the Wellfleet Router (entries in the wfAtmInterfaceTable), regardless of their current state, present on this system. |
| 1.3.6.1.4.1.18.3.5.9.5.1.3 | ScalarwfAtmOverallStatus | read-only | mandatory | Overall status of ATM interfaces in the Wellfleet Router(entries in the wfAtmInterfaceTable) present on this system. Healthy indicates each configured interfac… |
| 1.3.6.1.4.1.18.3.5.9.5.1.4 | ScalarwfAtmGlobalSigStkVersion | read-write | mandatory | Global signalling stack Version. This value will be used to by management entities to know the global version of signalling. The intent here is to have passive… |
| 1.3.6.1.4.1.18.3.5.9.5.2 | TablewfAtmInterfaceTable | not-accessible | mandatory | ATM Interface Table - Router Resident The statistical and configuration parameters for an ATM Interface. There is one MIB instance of this record per Sync or H… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1 | RowwfAtmInterfaceEntry | not-accessible | mandatory | The attributes for a particular ATM DXI Interface |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.1 | ColumnwfAtmInterfaceDelete | read-write | mandatory | Indication to create or delete an ATM DXI interface. This will remove ATMNET access over this interface The ATM Interface entry instance is removed from the MI… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.2 | ColumnwfAtmInterfaceDisable | read-write | mandatory | Indicates when an ATM DXI interface is to be enabled or disabled. Disabling will disable ATM Access over this interface. The ATM Interface instance is NOT remo… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.3 | ColumnwfAtmInterfaceState | read-only | mandatory | Indicates the state for this interface. The state indicates Not Present when the interface has been configured but has not been initialized. Init state indicat… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.4 | ColumnwfAtmInterfaceCircuit | read-only | mandatory | The Wellfleet circuit number of this entry |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.5 | ColumnwfAtmInterfaceMaxSupportedVCs | read-write | mandatory | Maximum number of VCs allowed on this interface. Initially set by configuration system for PVCs only |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.6 | ColumnwfAtmInterfaceVCsInUse | read-only | mandatory | The number of VCs that are currently configured on this interface |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.7 | ColumnwfAtmInterfaceDescr | read-write | mandatory | A textual string describing this ATM interface. |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.8 | ColumnwfAtmInterfaceType | read-only | mandatory | The transmission type used at the ATM interface. |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.9 | ColumnwfAtmInterfaceLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.10 | ColumnwfAtmInterfacePlcp | read-only | mandatory | Identifies the OID of the PLCP object in the MIB If no additional transmission and/or media specific information is available, this object has the value { 0 0 … |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.11 | ColumnwfAtmMpeNull | read-write | mandatory | Used to select Null, Multi-Protocol Encapsulation (RFC 1294) or Multi-Protocol Encapsulation (RFC 1483) layer for this Interface. Null is considered VC Based M… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.12 | ColumnwfAtmCsNull | read-write | mandatory | Used to configure the type of CS_PDU encapsulation supported on the ATM DXI interface based on the ATM Forum's ATM DXI specification. This configuration is on … |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.13 | ColumnwfAtmInterfaceMulticast | read-write | mandatory | This indicates whether the ATM service provider offers multicast service |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.14 | ColumnwfAtmDrops | read-only | mandatory | The cumulative count of packet drops on this ATM Interface. |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.15 | ColumnwfAtmInterfaceLmiDisable | read-write | mandatory | Indicates when an LMI entry is to be enabled or disabled. Disabling will temporarily disable the ability to report CSU/DSU traps and the ability to retrieve st… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.16 | ColumnwfAtmInterfaceLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.17 | ColumnwfAtmInterfaceLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower la… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.18 | ColumnwfAtmInterfaceDxiMode | read-write | mandatory | ATM DXI Mode. This attribute specifies the ATM DXI Mode for this interface based on the ATM Forum's ATM DXI specification. Currently supported is Modes 1a, 1b,… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.19 | ColumnwfAtmUnknownVCPkts | read-only | mandatory | The count of packets received with an unknown VC |
| 1.3.6.1.4.1.18.3.5.9.5.3 | TablewfAtmLmiTable | not-accessible | mandatory | ATM Local Management Interface Table - Router Resident The statistical and configuration parameters for an ATM DXI Local Management Interface. There is one LMI… |
| 1.3.6.1.4.1.18.3.5.9.5.3.1 | RowwfAtmLmiEntry | not-accessible | mandatory | The attributes for a particular ATM Lmi |
| 1.3.6.1.4.1.18.3.5.9.5.3.1.1 | ColumnwfAtmLmiState | read-only | mandatory | Indicates the state of the LMI for this interface The state indicates Not Present when the LMI has been configured but has not been initialized. Init state ind… |
| 1.3.6.1.4.1.18.3.5.9.5.3.1.2 | ColumnwfAtmLmiCircuit | read-only | mandatory | The circuit number of this entry |
| 1.3.6.1.4.1.18.3.5.9.5.3.1.3 | ColumnwfAtmLmiNoVCErrors | read-only | mandatory | The number of Frames dropped that couldn't be associated with the LMI VPI/VCI |
| 1.3.6.1.4.1.18.3.5.9.5.3.1.4 | ColumnwfAtmLmiProxyRequests | read-only | mandatory | The number of SNMP Proxy Requests |
| 1.3.6.1.4.1.18.3.5.9.5.3.1.5 | ColumnwfAtmLmiCsuDsuResponses | read-only | mandatory | The number of CSU/DSU SNMP Responses to Proxy Requests |
| 1.3.6.1.4.1.18.3.5.9.5.3.1.6 | ColumnwfAtmLmiCsuDsuTraps | read-only | mandatory | The number of CSU/DSU SNMP Traps Received |
| 1.3.6.1.4.1.18.3.5.9.5.3.1.7 | ColumnwfAtmLmiOtherErrors | read-only | mandatory | The number of frames dropped to format or other errors. |
| 1.3.6.1.4.1.18.3.5.9.5.3.1.8 | ColumnwfAtmLmiLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.3.1.9 | ColumnwfAtmLmiLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower la… |
| 1.3.6.1.4.1.18.3.5.9.5.4 | TablewfAtmPlcpTable | not-accessible | mandatory | The ATM PLCP Table - CSU/DSU Resident The PLCP object reflects information about either DS1 or DS3 PLCP framing status and performance. There is one instance o… |
| 1.3.6.1.4.1.18.3.5.9.5.4.1 | RowwfAtmPlcpEntry | not-accessible | mandatory | per linenumber/llindex PLCP objects |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.1 | ColumnwfAtmPlcpCct | read-only | mandatory | Identifies the DS1 or DS3 PLCP port for which this entry contains information. This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.2 | ColumnwfAtmPlcpPhysical | read-only | mandatory | Identifies the OID of the first object in the standard DS1 or DS3 MIB |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.3 | ColumnwfAtmPlcpLof | read-only | mandatory | True if Loss of Frame has been detected |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.4 | ColumnwfAtmPlcpLofCFA | read-only | mandatory | True if Loss of Frame has been detected over the CFA time period |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.5 | ColumnwfAtmPlcpYellow | read-only | mandatory | True if PLCP Yellow (Remote Alarm Indication) has been detected |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.6 | ColumnwfAtmPlcpYellowCFA | read-only | mandatory | True if PLCP Yellow (Remote Alarm Indication) has been detected over the CFA time period |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.7 | ColumnwfAtmPlcpStatus | read-only | mandatory | The value of this variable indicates the PLCP status as indicated by the three-bit PLCP LSS code received from the remote end. Connected is LSS code #0, linkUp… |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.8 | ColumnwfAtmPlcpSeconds | read-only | mandatory | The count of seconds elapsed since event counting began or since the counters were last cleared. The implementation may optionally allow this variable to be se… |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.9 | ColumnwfAtmPlcpBipErrors | read-only | mandatory | The count of PLCP Bit Interleaved Parity (BIP) errors detected. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.10 | ColumnwfAtmPlcpBipESecs | read-only | mandatory | BIP Errored Seconds. The count of seconds during which one or more BIP errors were detected. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.11 | ColumnwfAtmPlcpBipSESecs | read-only | mandatory | BIP Severely Errored Seconds. The count of seconds during which five (5) or more BIP errors were detected. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.12 | ColumnwfAtmPlcpFebes | read-only | mandatory | The count of PLCP Far End Block Errors (FEBE) detected. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.13 | ColumnwfAtmPlcpFebeESecs | read-only | mandatory | FEBE Errored Seconds. The count of seconds during which one or more FEBE errors were detected. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.14 | ColumnwfAtmPlcpFebeSESecs | read-only | mandatory | FEBE Severely Errored Seconds. The count of seconds during which five (5) or more FEBE errors were detected. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.15 | ColumnwfAtmPlcpFrameErrors | read-only | mandatory | The count of PLCP Frame bit errors detected. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.16 | ColumnwfAtmPlcpSevereFrameErrors | read-only | mandatory | The count of PLCP Severe Frame errors (aka Out Of Frame Events) detected. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.17 | ColumnwfAtmPlcpSEFS | read-only | mandatory | Severely Errored Framing Seconds. The count of seconds during which one or more PLCP Severe Frame errors were detected. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.18 | ColumnwfAtmPlcpUAS | read-only | mandatory | Unavailable Seconds. The count of seconds during which the PLCP service was declared to be unavailable. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.19 | ColumnwfAtmPlcpLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.4.1.20 | ColumnwfAtmPlcpLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may… |
| 1.3.6.1.4.1.18.3.5.9.5.5 | TablewfAtmUniTable | not-accessible | mandatory | The ATM UNI Table - CSU/DSU Resident The ATM User Network Interface (UNI) object reflects information about a particular ATM UNI. In particular it contains inf… |
| 1.3.6.1.4.1.18.3.5.9.5.5.1 | RowwfAtmUniEntry | not-accessible | mandatory | per linenumber/llindex User Network Interface (UNI) objects - wfAtmUniLineNumber and wfAtmUniLLIndex corresponds to Wellfleet linenumber/llindex number |
| 1.3.6.1.4.1.18.3.5.9.5.5.1.1 | ColumnwfAtmUniCct | read-only | mandatory | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.5.1.2 | ColumnwfAtmUniPhysical | read-only | mandatory | Identifies the OID of the first object in the standard DS1 or DS3 MIB corresponding to this ATM UNI port |
| 1.3.6.1.4.1.18.3.5.9.5.5.1.3 | ColumnwfAtmUniAal | read-only | mandatory | Identifies the AAL MIB corresponding to this ATM UNI port. There is only one AAL currently for the DXI application. |
| 1.3.6.1.4.1.18.3.5.9.5.5.1.4 | ColumnwfAtmUniSeconds | read-only | mandatory | The count of seconds elapsed since event counting began or since the counters were last cleared.The implementation may optionally allow this variable to be set… |
| 1.3.6.1.4.1.18.3.5.9.5.5.1.5 | ColumnwfAtmUniLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.5.1.6 | ColumnwfAtmUniLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may… |
| 1.3.6.1.4.1.18.3.5.9.5.6 | TablewfAtmUniAtmTable | not-accessible | mandatory | The ATM UNIATM Table CSU/DSU Resident This list contains ATM Layer parameters, one entry per ATM UNI port. The counts maintained in this table are totals for t… |
| 1.3.6.1.4.1.18.3.5.9.5.6.1 | RowwfAtmUniAtmEntry | not-accessible | mandatory | per linenumber/llindex UNI ATM Layer objects - wfAtmUniAtmLineNumber and wfAtmUniAtmLLIndex corresponds to Wellfleet linenumber/llindex number |
| 1.3.6.1.4.1.18.3.5.9.5.6.1.1 | ColumnwfAtmUniAtmCct | read-only | mandatory | The ATM UNI port for which corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.6.1.2 | ColumnwfAtmUniAtmNoBuffers | read-only | mandatory | Received ATM cells discarded due to the lack of available cell buffers |
| 1.3.6.1.4.1.18.3.5.9.5.6.1.3 | ColumnwfAtmUniAtmHECs | read-only | mandatory | Received ATM cells discarded due to an uncorrected HEC |
| 1.3.6.1.4.1.18.3.5.9.5.6.1.4 | ColumnwfAtmUniAtmCHECs | read-only | mandatory | Received ATM cells for which a HEC error was detected and corrected |
| 1.3.6.1.4.1.18.3.5.9.5.6.1.5 | ColumnwfAtmUniAtmNullCells | read-only | mandatory | Received Null (unassigned , empty) cells |
| 1.3.6.1.4.1.18.3.5.9.5.6.1.6 | ColumnwfAtmUniAtmMisdeliveredCells | read-only | mandatory | Received cells with an invalid VPI/VCI and were discarded |
| 1.3.6.1.4.1.18.3.5.9.5.6.1.7 | ColumnwfAtmUniAtmReceives | read-only | mandatory | Valid (non-null) ATM Cells received at this layer and passed up |
| 1.3.6.1.4.1.18.3.5.9.5.6.1.8 | ColumnwfAtmUniAtmTransmits | read-only | mandatory | Valid (non-null) ATM Cells transmitted at this layer and passed down to the PLCP layer |
| 1.3.6.1.4.1.18.3.5.9.5.6.1.9 | ColumnwfAtmUniAtmLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.6.1.10 | ColumnwfAtmUniAtmLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may… |
| 1.3.6.1.4.1.18.3.5.9.5.8 | TablewfAtmVbrTable | not-accessible | mandatory | The ATM VBR Table - CSU/DSU Resident The ATM Variable Bit Rate (VBR) object is one of several types of ATM Adaptation Layer (AAL) objects. The ATM VBR object r… |
| 1.3.6.1.4.1.18.3.5.9.5.8.1 | RowwfAtmVbrEntry | not-accessible | mandatory | per linenumber/llindex VBR AAL objects - wfAtmVbrLineNumber and wfAtmVbrLLIndex corresponds to Wellfleet linenumber/llindex number |
| 1.3.6.1.4.1.18.3.5.9.5.8.1.1 | ColumnwfAtmVbrCct | read-only | mandatory | Identifies the ATM VBR object which corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.8.1.2 | ColumnwfAtmVbrAtmUni | read-only | mandatory | Identifies the OID of the first object in the ATM UNI MIB corresponding to this ATM VBR-AAL |
| 1.3.6.1.4.1.18.3.5.9.5.8.1.3 | ColumnwfAtmVbrDxi | read-only | mandatory | Identifies the DXI MIB corresponding to this ATM VBR-AAL. There is only one AAL currently for the DXI application. |
| 1.3.6.1.4.1.18.3.5.9.5.8.1.4 | ColumnwfAtmVbrSeconds | read-only | mandatory | The count of seconds elapsed since event counting began or since the counters were last cleared. The implementation may optionally allow this variable to be se… |
| 1.3.6.1.4.1.18.3.5.9.5.8.1.5 | ColumnwfAtmVbrLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.8.1.6 | ColumnwfAtmVbrLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may… |
| 1.3.6.1.4.1.18.3.5.9.5.9 | TablewfAtmVbrSarTable | not-accessible | mandatory | The ATM VBR SAR Table CSU/DSU Resident This table contains ATM VBR-AAL, SAR Layer parameters, the entry per ATM VBR-AAL object. The counts maintained in this t… |
| 1.3.6.1.4.1.18.3.5.9.5.9.1 | RowwfAtmVbrSarEntry | not-accessible | mandatory | per linenumber/llindex VBR AAL SAR sublayer objects - wfAtmSarLineNumber and wfAtmSarLLIndex corresponds to Wellfleet linenumber/llindex number |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.1 | ColumnwfAtmVbrSarCct | read-only | mandatory | identifies the VBR_SAR object which corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.2 | ColumnwfAtmVbrSarAssemblyTimer | read-only | mandatory | The maximum time period (milliseconds) allowed for CS_PDU assembly process to complete. This is the time between receipt of a BOM and receipt of an EOM SAR_PDU. |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.3 | ColumnwfAtmVbrSarCrc10Errors | read-only | mandatory | The count of received SAR_PDUs discarded due to CRC10 error |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.4 | ColumnwfAtmVbrSarCellMidErrors | read-only | mandatory | The count of received SAR_PDUs discarded due to an invalid MID field value |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.5 | ColumnwfAtmVbrSarCsPduSizeTooBigErrors | read-only | mandatory | The count of received SAR_PDUs discarded due to CS_PDU size is too big . NOTE: This attribute needs to be moved to router based CS object. |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.6 | ColumnwfAtmVbrSarNoBufferErrors | read-only | mandatory | No CS_PDU assembly buffer space |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.7 | ColumnwfAtmVbrSarComNoProcessErrors | read-only | mandatory | Received COM SAR_PDUs discarded due to lack of an active CS_PDU assembly process |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.8 | ColumnwfAtmVbrSarEomNoProcessErrors | read-only | mandatory | Received EOM SAR_PDUs discarded due to lack of an active CS_PDU assembly process |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.9 | ColumnwfAtmVbrSarCellSequenceErrors | read-only | mandatory | The count of active CS_PDU assembly processes closed (aborted, accumulation discarded) due to detecting a SAR sequence number error in a received SAR_PDU. |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.10 | ColumnwfAtmVbrSarCellLengthErrors | read-only | mandatory | The count of active CS_PDU assembly processes closed (aborted, accumulation discarded) due to detecting a length field error in a received SAR_PDU. |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.11 | ColumnwfAtmVbrSarBomBeforeEomErrors | read-only | mandatory | The count of active CS_PDU assembly processes closed (aborted, accumulation discarded) due to receiving a new BOM or SSM SAR_PDU for the same VPI/VCI (and MID)… |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.12 | ColumnwfAtmVbrSarTimeouts | read-only | mandatory | The count of active CS_PDU assembly processes closed (aborted, accumulation discarded) due to expiration of the assembly timer. |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.13 | ColumnwfAtmVbrSarLengthExceeds | read-only | mandatory | The count of active CS_PDU assembly processes closed (aborted, accumulation discarded) due to receiving more SAR_PDUs (and their payloads) than will fit in the… |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.14 | ColumnwfAtmVbrSarReceives | read-only | mandatory | The count of received SAR_PDUs (all types, i.e. BOM, COM, EOM, SSM) successfully accumulated into a CS_PDU assembly buffer. |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.15 | ColumnwfAtmVbrSarTransmits | read-only | mandatory | The count of SAR_PDUs (all types, i.e. BOM, COM, EOM, SSM) transmitted to the ATM layer from a CS_PDU segmentation process. |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.16 | ColumnwfAtmVbrSarLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.9.1.17 | ColumnwfAtmVbrSarLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may… |
| 1.3.6.1.4.1.18.3.5.9.5.11 | TablewfAtmVbrCsTable | not-accessible | mandatory | The ATM VBR CS Table - Router Resident This table contains ATM VBR-AAL, CS Layer parameters, one entry per ATM VBR-AAL object. The counts maintained in this ta… |
| 1.3.6.1.4.1.18.3.5.9.5.11.1 | RowwfAtmVbrCsEntry | not-accessible | mandatory | per linenumber/llindex VBR_CS objects - wfAtmVbrCsLineNumber and wfAtmVbrCsLLIndex corresponds to Wellfleet linenumber/llindex number |
| 1.3.6.1.4.1.18.3.5.9.5.11.1.1 | ColumnwfAtmVbrCsCct | read-only | mandatory | Identifies the VBR_CS object which corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.11.1.2 | ColumnwfAtmVbrCsBETagMismatches | read-only | mandatory | The count of received CS_PDUs discarded due to a mismatch when comparing the BETag fields in the CS_PDU header and trailer. |
| 1.3.6.1.4.1.18.3.5.9.5.11.1.3 | ColumnwfAtmVbrCsLengthMismatches | read-only | mandatory | The count of received CS_PDUs discarded due to a mismatch when comparing the CS_PDU header BASize field, the CS_PDU trailer length field and the actual length … |
| 1.3.6.1.4.1.18.3.5.9.5.11.1.4 | ColumnwfAtmVbrCsMisdeliveredPdus | read-only | mandatory | The count of received SAR_PDUs discarded due to an invalid VPI/VCI detected at this layer. |
| 1.3.6.1.4.1.18.3.5.9.5.11.1.5 | ColumnwfAtmVbrCsReceives | read-only | mandatory | The count of the valid CS_PDUs received from the SAR layer and passed on to the next upper layer for further processing. |
| 1.3.6.1.4.1.18.3.5.9.5.11.1.6 | ColumnwfAtmVbrCsTransmits | read-only | mandatory | The count of CS_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission |
| 1.3.6.1.4.1.18.3.5.9.5.11.1.7 | ColumnwfAtmVbrCsLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.11.1.8 | ColumnwfAtmVbrCsLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower la… |
| 1.3.6.1.4.1.18.3.5.9.5.12 | TablewfAtmVbrCsVciTable | not-accessible | mandatory | The ATM VBR CS_VCI Table - Router Resident This table contains ATM VBR-AAL, CS Layer parameters, one entry per ATM VPI/VCI for which information has been recor… |
| 1.3.6.1.4.1.18.3.5.9.5.12.1 | RowwfAtmVbrCsVciEntry | not-accessible | mandatory | per virtual circuit VBR_CS objects |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.1 | ColumnwfAtmVbrCsVciVbrCct | read-only | mandatory | Identifies the VBR_CS object which corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.2 | ColumnwfAtmVbrCsVciIndex | read-only | mandatory | Identifies the VPI/VCI object for which this entry contains information. |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.3 | ColumnwfAtmVbrCsVciBETagMismatches | read-only | mandatory | The count of received CSVCI_PDUs discarded due to a mismatch when comparing the BETag fields in the CSVCI_PDU header and trailer. |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.4 | ColumnwfAtmVbrCsVciLengthMismatches | read-only | mandatory | The count of received CSVCI_PDUs discarded due to a mismatch when comparing the CSVCI_PDU header BASize field, the CSVCI_PDU trailer length field and the actua… |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.5 | ColumnwfAtmVbrCsVciMisdeliveredPdus | read-only | mandatory | The count of received SAR_PDUs discarded due to an invalid VPI/VCI detected at this layer. |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.6 | ColumnwfAtmVbrCsVciReceives | read-only | mandatory | The count of the valid CSVCI_PDUs received from the SAR layer and passed on to the next upper layer for further processing. |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.7 | ColumnwfAtmVbrCsVciTransmits | read-only | mandatory | The count of CSVCI_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.8 | ColumnwfAtmVbrCsVciOctetReceives | read-only | mandatory | The octet count of the valid CSVCI_PDUs received from the SAR layer and passed on to the next upper layer for further processing. |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.9 | ColumnwfAtmVbrCsVciOctetTransmits | read-only | mandatory | The count of CSVCI_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.10 | ColumnwfAtmVbrCsVciLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.12.1.11 | ColumnwfAtmVbrCsVciLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower la… |
| 1.3.6.1.4.1.18.3.5.9.5.13 | TablewfAtmMpeTable | not-accessible | mandatory | The ATM MPE Table - Router Resident This table contains ATM DXI MPE Layer parameters, one entry per ATM Circuit.The counts maintained in this table are totals … |
| 1.3.6.1.4.1.18.3.5.9.5.13.1 | RowwfAtmMpeEntry | not-accessible | mandatory | per circuit MPE objects - wfAtmMpeIndex corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.13.1.1 | ColumnwfAtmMpeIndex | read-only | mandatory | Identifies the MPE object for which this entry contains information. This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.13.1.2 | ColumnwfAtmMpeInvalidNlpids | read-only | mandatory | The count of received MPE_PDUs discarded due to an unknown or unsupported NLPID |
| 1.3.6.1.4.1.18.3.5.9.5.13.1.3 | ColumnwfAtmMpeInvalidPids | read-only | mandatory | The count of received MPE_PDUs discarded due to an unknown or unsupported PID |
| 1.3.6.1.4.1.18.3.5.9.5.13.1.4 | ColumnwfAtmMpeInvalidOuis | read-only | mandatory | The count of received MPE_PDUs discarded due to an unknown or unsupported OUI |
| 1.3.6.1.4.1.18.3.5.9.5.13.1.5 | ColumnwfAtmMpeMisdeliveredPdus | read-only | mandatory | The count of received MPE_PDUs discarded due to an inactive SAP. |
| 1.3.6.1.4.1.18.3.5.9.5.13.1.6 | ColumnwfAtmMpeUnsupportedControlFields | read-only | mandatory | The count of received MPE_PDUs discarded due to an unknown or unsupported Control field |
| 1.3.6.1.4.1.18.3.5.9.5.13.1.7 | ColumnwfAtmMpeInvalidSAP | read-only | mandatory | The cound of received MPE_PDUs discarded due to either a bad SSAP or DSAP (RFC1483) |
| 1.3.6.1.4.1.18.3.5.9.5.14 | TablewfAtmPvcTable | not-accessible | mandatory | The ATM PVC Table - Router Resident This table contains Virtual Circuit configuration and stats parameters, one entry per ATM VPI/PVC for which information has… |
| 1.3.6.1.4.1.18.3.5.9.5.14.1 | RowwfAtmPvcEntry | not-accessible | mandatory | per virtual circuit objects |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.1 | ColumnwfAtmPvcDelete | read-write | mandatory | Used to create/delete an instance of this object. This action will result in a PVC being added or removed from service. |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.2 | ColumnwfAtmPvcCct | read-only | mandatory | Identifies the object which corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.3 | ColumnwfAtmPvcVpi | read-only | mandatory | The VPI associated with this PVC |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.4 | ColumnwfAtmPvcVci | read-only | mandatory | The VCI associated with this PVC |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.5 | ColumnwfAtmPvcReceives | read-only | mandatory | The count of the valid PVC_PDUs received from the SAR layer and passed on to the next upper layer for further processing. |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.6 | ColumnwfAtmPvcTransmits | read-only | mandatory | The count of PVC_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.7 | ColumnwfAtmPvcOctetReceives | read-only | mandatory | The octet count of the valid PVC_PDUs received from the SAR layer and passed on to the next upper layer for further processing. |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.8 | ColumnwfAtmPvcOctetTransmits | read-only | mandatory | The octet count of PVC_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.9 | ColumnwfAtmPvcMode | read-write | mandatory | The mode of the given VC. GROUP - treats the VC as one of many vc's on a circuit. HYBRID - treats the VC as one of many vc's on a circuit for protocol traffic,… |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.10 | ColumnwfAtmPvcDirectAccessCct | read-write | mandatory | Circuit number to use for this VC for hybrid or direct access routing |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.11 | ColumnwfAtmPvcState | read-only | mandatory | Indicates the state of the PVC. The state indicates Not Present when the PVC has been configured but has not been initialized. Init state indicates that the PV… |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.12 | ColumnwfAtmPvcMpeNull | read-write | mandatory | Used to select Null, Multi-Protocol Encapsulation (RFC 1294) or Multi-Protocol Encapsulation (RFC 1483) layer for this PVC. Null is considered VC Based Multipl… |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.13 | ColumnwfAtmPvcCsNull | read-write | mandatory | Used to configure the type of CS_PDU encapsulation supported on the ATM DXI PVC based on the ATM Forum's ATM DXI specification. This configuration is on a per … |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.14 | ColumnwfAtmPvcDisable | read-write | mandatory | Used to enable/disable a PVC |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.15 | ColumnwfAtmPvcDrops | read-only | mandatory | The total count of packets dropped on this VC |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.16 | ColumnwfAtmPvcMulticast | read-write | mandatory | Indicates whether this VPI/VCI is used for multicast or single destination. |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.17 | ColumnwfAtmPvcLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.14.1.18 | ColumnwfAtmPvcLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower la… |
| 1.3.6.1.4.1.18.3.5.9.5.15 | TablewfAtmDxiTable | not-accessible | mandatory | The ATM DXI Table - An entry in this table is either resident in the Wellfleet MIB or in the Digital Link MIB via the SNMP Proxy. The Component attribute deter… |
| 1.3.6.1.4.1.18.3.5.9.5.15.1 | RowwfAtmDxiEntry | not-accessible | mandatory | per linenumber/llindex ATM DXI objects - wfAtmDxiLineNumber and wfAtmDxiLLIndex corresponds to Wellfleet linenumber/llindex number |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.1 | ColumnwfAtmDxiCct | read-only | mandatory | Identifies the ATM DXI cct which corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.2 | ColumnwfAtmDxiComponent | read-only | mandatory | Identifies the component where the ATM DXI parameters are resident - either the router or CSU/DSU. |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.3 | ColumnwfAtmDxiMaxLmiPduLengthErrors | read-only | mandatory | The maximum length of an LMI PDU, measured in octets |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.4 | ColumnwfAtmDxiSeconds | read-only | mandatory | The count of seconds elapsed since event counting began or since the counters were last cleared. The implementation may optionally allow this variable to be se… |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.5 | ColumnwfAtmDxiDiscardedFrames | read-only | mandatory | The count of received frames discarded due to lack of buffer space. |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.6 | ColumnwfAtmDxiAbortedFrames | read-only | mandatory | The count of the received frames aborted (and discarded) before the closing flag |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.7 | ColumnwfAtmDxiNonOctetAlignedFrames | read-only | mandatory | The count of the received frames discarded due to not being octet aligned. |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.8 | ColumnwfAtmDxiTooLongFrames | read-only | mandatory | The count of the received frames discarded due to being longer than the maximum allowed frame length |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.9 | ColumnwfAtmDxiTooShortFrames | read-only | mandatory | The count of the received frames discarded due to being shorter than the minimum allowed frame length (less than 6 octets long) |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.10 | ColumnwfAtmDxiFrameChecksumErrors | read-only | mandatory | The count of the received frames discarded due to detected checksum error (CRC16) |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.11 | ColumnwfAtmDxiFrameHeaderErrors | read-only | mandatory | The count of the received frames discarded due to detected frame relay header errors |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.12 | ColumnwfAtmDxiValidFrameReceives | read-only | mandatory | The count of the valid frames received. |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.13 | ColumnwfAtmDxiFrameTransmits | read-only | mandatory | The count of CSVCI_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.14 | ColumnwfAtmDxiLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.15.1.15 | ColumnwfAtmDxiLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower la… |
| 1.3.6.1.4.1.18.3.5.9.5.16 | TablewfAtmDxiDxiAddrTable | not-accessible | mandatory | The ATM DXI DXIADDR Table - Router and CSU/DSU Resident This table contains ATM DXI parameters, one entry per DXI DXIADDR for which information has been record… |
| 1.3.6.1.4.1.18.3.5.9.5.16.1 | RowwfAtmDxiDxiAddrEntry | not-accessible | mandatory | per DXIADDR ATM DXI objects |
| 1.3.6.1.4.1.18.3.5.9.5.16.1.1 | ColumnwfAtmDxiDxiAddrDxiCct | read-only | mandatory | Identifies the Atm Dxi object for which this entry contains information. This attribute corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.16.1.2 | ColumnwfAtmDxiDxiAddrDxiComponent | read-only | mandatory | Identifies the component where the ATM DXI parameters are resident - either the router or CSU/DSU. |
| 1.3.6.1.4.1.18.3.5.9.5.16.1.3 | ColumnwfAtmDxiDxiAddrIndex | read-only | mandatory | Identifies the DXIADDR object for which this entry contains information. |
| 1.3.6.1.4.1.18.3.5.9.5.16.1.4 | ColumnwfAtmDxiDxiAddrAtmVbr | read-only | mandatory | The object identifier of the first object in the ATM VBR-AAL MIB which corresponds to this DXIADDR of this DXI port. If there is only one ATM VBR-AAL object as… |
| 1.3.6.1.4.1.18.3.5.9.5.16.1.5 | ColumnwfAtmDxiDxiAddrVpiVci | read-only | mandatory | The VPI/VCI of the ATM UNI of the ATM VBR-AAL object which corresponds to this DXIADDR of this DXI port. For the LMI DXIADDR there is no valid VPI/VCI value. |
| 1.3.6.1.4.1.18.3.5.9.5.16.1.6 | ColumnwfAtmDxiDxiAddrReceives | read-only | mandatory | The count of the valid frames received from the next lower layer and passed on to the next upper layer for further processing. |
| 1.3.6.1.4.1.18.3.5.9.5.16.1.7 | ColumnwfAtmDxiDxiAddrTransmits | read-only | mandatory | The count of frames received from upper layers and sent to the next lower layer for transmission |
| 1.3.6.1.4.1.18.3.5.9.5.16.1.8 | ColumnwfAtmDxiDxiAddrLineNumber | read-only | mandatory | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.16.1.9 | ColumnwfAtmDxiDxiAddrLLIndex | read-only | mandatory | Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower la… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DxiAddr | INTEGER (1..8388608) |