Wellfleet-BISYNC-MIB
48 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Gauge statments IMPORTS Counter TimeTicks |
| Wellfleet-COMMON-MIB | wfBisyncGroup |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.27.1 | TablewfBisyncTable | not-accessible | mandatory | * BISYNC line record * |
| 1.3.6.1.4.1.18.3.4.27.1.1 | RowwfBisyncEntry | not-accessible | mandatory | An entry in the BISYNC table |
| 1.3.6.1.4.1.18.3.4.27.1.1.1 | ColumnwfBisyncDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.27.1.1.2 | ColumnwfBisyncDisable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.27.1.1.3 | ColumnwfBisyncCct | read-write | mandatory | CCT number for this line instance |
| 1.3.6.1.4.1.18.3.4.27.1.1.4 | ColumnwfBisyncMtu | read-write | mandatory | MTU parameter, this is buffer size for BISYNC media, fixed |
| 1.3.6.1.4.1.18.3.4.27.1.1.5 | ColumnwfBisyncMediaType | read-write | mandatory | Media type selection is provided via this parameter |
| 1.3.6.1.4.1.18.3.4.27.1.1.6 | ColumnwfBisyncCableType | read-write | mandatory | Type of Cable attached to the Bisync port - this is needed for V.25bis and Raise DTR to properly communicate with the modem |
| 1.3.6.1.4.1.18.3.4.27.1.1.7 | ColumnwfBisyncClkSource | read-write | mandatory | Tx/Rx clock source is either internally or external generated. |
| 1.3.6.1.4.1.18.3.4.27.1.1.8 | ColumnwfBisyncClkSpeed | read-write | mandatory | Tx/Rx clock speed. This speed selection is valid when either internal or external clocking is selected. In some cases, router software uses this attribute for … |
| 1.3.6.1.4.1.18.3.4.27.1.1.9 | ColumnwfBisyncService | read-write | mandatory | Service Type selection is provided via this parameter. The supported services can be selected per interface. |
| 1.3.6.1.4.1.18.3.4.27.1.1.10 | ColumnwfBisyncCfgTxQueueLength | read-write | mandatory | Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based … |
| 1.3.6.1.4.1.18.3.4.27.1.1.11 | ColumnwfBisyncCfgRxQueueLength | read-write | mandatory | Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based d… |
| 1.3.6.1.4.1.18.3.4.27.1.1.12 | ColumnwfBisyncCharMode | read-write | mandatory | Control Character Mode - ASCII/EBCDIC |
| 1.3.6.1.4.1.18.3.4.27.1.1.13 | ColumnwfBisyncLineNumber | read-write | mandatory | line number for this line instance |
| 1.3.6.1.4.1.18.3.4.27.1.1.14 | ColumnwfBisyncRtsEnable | read-write | mandatory | The RTS parameter enables/disables detection of RTS signals on the interface. Normal default mode is running without RTS enabled |
| 1.3.6.1.4.1.18.3.4.27.1.1.15 | ColumnwfBisyncExternalClkSpeed | read-write | mandatory | External Clock Speed. If external clocking is configured, this attribute should be set to the clock speed of the externally supplied clock. Depending on the pr… |
| 1.3.6.1.4.1.18.3.4.27.1.1.16 | ColumnwfBisyncModule | read-only | mandatory | Module number for ASN platform, filled in by driver. For non-ASN platforms, this attribute will not be used |
| 1.3.6.1.4.1.18.3.4.27.1.1.17 | ColumnwfBisyncActualConnector | read-only | mandatory | Actual Connector Number for ASN platform, filled in by driver. For non-ASN platforms, this attribute will not be used. |
| 1.3.6.1.4.1.18.3.4.27.1.1.18 | ColumnwfBisyncConnector | read-only | mandatory | Instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined… |
| 1.3.6.1.4.1.18.3.4.27.1.1.19 | ColumnwfBisyncSlot | read-only | mandatory | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.27.1.1.20 | ColumnwfBisyncActiveCct | read-only | mandatory | Active CCT number for this line instance |
| 1.3.6.1.4.1.18.3.4.27.1.1.21 | ColumnwfBisyncState | read-only | mandatory | Line Driver state variable, Not Present, DSR Wait, Init, Down, Up |
| 1.3.6.1.4.1.18.3.4.27.1.1.22 | ColumnwfBisyncLastState | read-only | mandatory | The state which the driver was in prior to the most recent re-initiali- zation. |
| 1.3.6.1.4.1.18.3.4.27.1.1.23 | ColumnwfBisyncRxOctets | read-only | mandatory | Number of octets received without error |
| 1.3.6.1.4.1.18.3.4.27.1.1.24 | ColumnwfBisyncTxOctets | read-only | mandatory | Number of octets transmitted without error |
| 1.3.6.1.4.1.18.3.4.27.1.1.25 | ColumnwfBisyncRxFrames | read-only | mandatory | Number of frames received without error |
| 1.3.6.1.4.1.18.3.4.27.1.1.26 | ColumnwfBisyncTxFrames | read-only | mandatory | Number of frames transmitted without error |
| 1.3.6.1.4.1.18.3.4.27.1.1.27 | ColumnwfBisyncRxErrors | read-only | mandatory | Number of receive errors |
| 1.3.6.1.4.1.18.3.4.27.1.1.28 | ColumnwfBisyncTxErrors | read-only | mandatory | Number of transmission errors |
| 1.3.6.1.4.1.18.3.4.27.1.1.29 | ColumnwfBisyncTxLackRescs | read-only | mandatory | Number of frames clipped in driver's transmit routine due to transmit congestion. |
| 1.3.6.1.4.1.18.3.4.27.1.1.30 | ColumnwfBisyncTxUnderFlows | read-only | mandatory | Number of transmission underflows, device FIFO went empty before next DMA request was granted. |
| 1.3.6.1.4.1.18.3.4.27.1.1.31 | ColumnwfBisyncRxOverFlows | read-only | mandatory | Number of receive overflows, device FIFO overflowed before next DMA cycle granted. No buffer resources available. |
| 1.3.6.1.4.1.18.3.4.27.1.1.32 | ColumnwfBisyncRxBadFrames | read-only | mandatory | Number of bad receive frames, caused by FCS errors or non octet aligned. |
| 1.3.6.1.4.1.18.3.4.27.1.1.33 | ColumnwfBisyncRxRunts | read-only | mandatory | Number of runt frames received |
| 1.3.6.1.4.1.18.3.4.27.1.1.34 | ColumnwfBisyncTxQueueLength | read-only | mandatory | Current Transmit Queue Length. |
| 1.3.6.1.4.1.18.3.4.27.1.1.35 | ColumnwfBisyncRxQueueLength | read-only | mandatory | Current Receive Queue Length. |
| 1.3.6.1.4.1.18.3.4.27.1.1.36 | ColumnwfBisyncRxReplenMisses | read-only | mandatory | Number of packet buffer misses while attempting to replenish driver receive ring. |
| 1.3.6.1.4.1.18.3.4.27.1.1.37 | ColumnwfBisyncLastChange | read-only | mandatory | The value of the SysUptime at the time the interface entered it's current operational state (UP state). SysUpTime is defined as the time (in hundredths of a se… |
| 1.3.6.1.4.1.18.3.4.27.1.1.38 | ColumnwfBisyncOutQLen | read-only | mandatory | The instantaneous current length of the output packet queue |
| 1.3.6.1.4.1.18.3.4.27.1.1.39 | ColumnwfBisyncRxLackRescsChar | read-only | mandatory | Number of Rx characters dropped due to lack of buffer resources |
| 1.3.6.1.4.1.18.3.4.27.1.1.40 | ColumnwfBisyncIsrBCZero | read-only | mandatory | Number of interrupts with byte count zero |
| 1.3.6.1.4.1.18.3.4.27.1.1.41 | ColumnwfBisyncIsrBCSix | read-only | mandatory | Number of interrupts with byte count six or more |
| 1.3.6.1.4.1.18.3.4.27.1.1.42 | ColumnwfBisyncIsrBCInvalid | read-only | mandatory | Number of interrupts with an unexpected message byte |
| 1.3.6.1.4.1.18.3.4.27.1.1.43 | ColumnwfBisyncIsrBCErrors | read-only | mandatory | Number of interrupt errors |
| 1.3.6.1.4.1.18.3.4.27.1.1.44 | ColumnwfBisyncLocalConnectionState | read-only | mandatory | The state of the cable at the router end. |
| 1.3.6.1.4.1.18.3.4.27.1.1.45 | ColumnwfBisyncRemoteConnectionState | read-only | mandatory | The state of the cable at the controller end. |
| 1.3.6.1.4.1.18.3.4.27.1.1.46 | ColumnwfBisyncAdditionalSyncPairs | read-write | mandatory | The number of pairs of sync characters, in addition to the first pair, to send between frames. |