Wellfleet-BRIDGE-MIB
42 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.1.1 | NodewfBrLearning | |||
| 1.3.6.1.4.1.18.3.5.1.1.1.1 | NodewfBrTp | |||
| 1.3.6.1.4.1.18.3.5.1.1.1.1.1 | ScalarwfBrTpBaseDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the bridge. |
| 1.3.6.1.4.1.18.3.5.1.1.1.1.2 | ScalarwfBrTpBaseEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable the bridge. |
| 1.3.6.1.4.1.18.3.5.1.1.1.1.3 | ScalarwfBrTpBaseState | read-only | mandatory | The current state of the entire Bridge. |
| 1.3.6.1.4.1.18.3.5.1.1.1.1.4 | ScalarwfBrTpBaseFDBEntries | read-only | mandatory | The current number of forward table entries |
| 1.3.6.1.4.1.18.3.5.1.1.1.1.5 | ScalarwfBrTpBaseFDBSize | read-write | mandatory | Size of the bridge table - only looked at at boot time |
| 1.3.6.1.4.1.18.3.5.1.1.1.1.6 | ScalarwfBrTpBaseFDBEnable | read-write | mandatory | Disable placing fdb entries on the mib. This attribute only inspected at boot time. |
| 1.3.6.1.4.1.18.3.5.1.1.1.1.7 | ScalarwfBrTpBaseFlushFwdTbl | read-write | mandatory | Flush the bridge fwd tables |
| 1.3.6.1.4.1.18.3.5.1.1.1.1.8 | ScalarwfBrTpBaseFDBPortChange | read-only | mandatory | The amount that all the stations move from one port to anotherard table entries |
| 1.3.6.1.4.1.18.3.5.1.1.1.2 | TablewfBrTpFdbTable | not-accessible | mandatory | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.18.3.5.1.1.1.2.1 | RowwfBrTpFdbEntry | not-accessible | mandatory | An entry in the wfBrTpFdbTable. |
| 1.3.6.1.4.1.18.3.5.1.1.1.2.1.1 | ColumnwfBrTpBaseFdbAddress | read-only | mandatory | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.18.3.5.1.1.1.2.1.2 | ColumnwfBrTpBaseFdbPort | read-only | mandatory | The port number on which the wfBrTpBaseFdbAddress was learned. |
| 1.3.6.1.4.1.18.3.5.1.1.1.2.1.3 | ColumnwfBrTpBaseFdbStatus | read-only | mandatory | The status of this entry. The meanings of the values are: learned(3) : the value of the corresponding instance of wfBrTpFdbPort was learned, and is being used. |
| 1.3.6.1.4.1.18.3.5.1.1.1.3 | NodewfBrTpAggrStats | |||
| 1.3.6.1.4.1.18.3.5.1.1.1.3.1 | ScalarwfBrTpAggrInPkts | read-only | mandatory | The total number of packets received by the transparent bridge |
| 1.3.6.1.4.1.18.3.5.1.1.1.3.2 | ScalarwfBrTpAggrOutPkts | read-only | mandatory | The total number of packets sent by the transparent bridge |
| 1.3.6.1.4.1.18.3.5.1.1.1.3.3 | ScalarwfBrTpAggrDiscardPkts | read-only | mandatory | The total number of packets discarded by the transparent bridge |
| 1.3.6.1.4.1.18.3.5.1.1.3 | TablewfBrTpInterfaceTable | not-accessible | mandatory | A table that contains information about every interface that is associated with this transparent bridge. inst_id[1] = wfBrTpInterfaceCircuit |
| 1.3.6.1.4.1.18.3.5.1.1.3.1 | RowwfBrTpInterfaceEntry | not-accessible | mandatory | An entry in wfBrTpInterface. |
| 1.3.6.1.4.1.18.3.5.1.1.3.1.1 | ColumnwfBrTpInterfaceDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an interface. |
| 1.3.6.1.4.1.18.3.5.1.1.3.1.2 | ColumnwfBrTpInterfaceEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an interface. |
| 1.3.6.1.4.1.18.3.5.1.1.3.1.3 | ColumnwfBrTpInterfaceState | read-only | mandatory | The current state of the interface. |
| 1.3.6.1.4.1.18.3.5.1.1.3.1.4 | ColumnwfBrTpInterfaceCircuit | read-only | mandatory | The circuit that this interface runs over. |
| 1.3.6.1.4.1.18.3.5.1.1.3.1.5 | ColumnwfBrTpInterfaceMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.4.1.18.3.5.1.1.3.1.6 | ColumnwfBrTpInterfaceInFrames | read-only | mandatory | The number of frames that have been received by this interface from its circuit. |
| 1.3.6.1.4.1.18.3.5.1.1.3.1.7 | ColumnwfBrTpInterfaceOutFrames | read-only | mandatory | The number of frames that have been transmitted by this interface to its circuit. |
| 1.3.6.1.4.1.18.3.5.1.1.3.1.8 | ColumnwfBrTpInterfaceInDiscards | read-only | mandatory | Count of valid frames received which were received on this interface but then discarded. |
| 1.3.6.1.4.1.18.3.5.1.1.3.1.9 | ColumnwfBrTpInterfaceTranslationDisable | read-write | mandatory | Enable/Disable translation bridging parameter. Default is enabled. |
| 1.3.6.1.4.1.18.3.5.1.1.4 | TablewfBrTrafficFilterTable | not-accessible | mandatory | Bridge Traffic Filters |
| 1.3.6.1.4.1.18.3.5.1.1.4.1 | RowwfBrTrafficFilterEntry | not-accessible | mandatory | An entry in WfBrTrafficFilterTable. |
| 1.3.6.1.4.1.18.3.5.1.1.4.1.1 | ColumnwfBrTrafficFilterCreate | read-write | mandatory | Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted. |
| 1.3.6.1.4.1.18.3.5.1.1.4.1.2 | ColumnwfBrTrafficFilterEnable | read-write | mandatory | Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule. |
| 1.3.6.1.4.1.18.3.5.1.1.4.1.3 | ColumnwfBrTrafficFilterStatus | read-only | mandatory | Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error… |
| 1.3.6.1.4.1.18.3.5.1.1.4.1.4 | ColumnwfBrTrafficFilterCounter | read-only | mandatory | The number of received packets that have matched this rule. |
| 1.3.6.1.4.1.18.3.5.1.1.4.1.5 | ColumnwfBrTrafficFilterDefinition | read-write | mandatory | The filter rule definition. |
| 1.3.6.1.4.1.18.3.5.1.1.4.1.6 | ColumnwfBrTrafficFilterReserved | read-only | mandatory | Reserved field. |
| 1.3.6.1.4.1.18.3.5.1.1.4.1.7 | ColumnwfBrTrafficFilterCircuit | read-only | mandatory | The ID of the Bridge Circuit to which the filter is applied. |
| 1.3.6.1.4.1.18.3.5.1.1.4.1.8 | ColumnwfBrTrafficFilterRuleNumber | read-only | mandatory | ID for the rule. |
| 1.3.6.1.4.1.18.3.5.1.1.4.1.9 | ColumnwfBrTrafficFilterFragment | read-only | mandatory | Fragment number - for large rules. |
| 1.3.6.1.4.1.18.3.5.1.1.4.1.10 | ColumnwfBrTrafficFilterName | read-write | mandatory | name of the rule number |