Wellfleet-DCMMW-MIB
46 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.3.2.16.1 | NodewfDCMmw | |||
| 1.3.6.1.4.1.18.3.3.2.16.1.1 | ScalarwfDCMmwDelete | read-write | obsolete | DCMMW is dynamically loaded. This object specifies that the users can perform a set operation on this object in order to create/delete DCMMW base record. Defau… |
| 1.3.6.1.4.1.18.3.3.2.16.1.2 | ScalarwfDCMmwDisable | read-write | obsolete | Enables or Disables DCMMW Subsystem. By disabling DCMMW, can disable the DCM board. |
| 1.3.6.1.4.1.18.3.3.2.16.1.3 | ScalarwfDCMmwImageName | read-write | obsolete | A textual string to describe the name of DCM image to be download on to DCM. The image name should be a fully qualified filename. For ex: vol:filename. |
| 1.3.6.1.4.1.18.3.3.2.16.1.4 | ScalarwfDCMmwBootOption | read-write | obsolete | Specifies DCM's image load mode to DCMMW. If the option specified is local, DCMMW will not load a new image to DCM's shared memory. If the option specified is … |
| 1.3.6.1.4.1.18.3.3.2.16.1.5 | ScalarwfDCMmwImageSaveMode | read-write | obsolete | Specifies DCM's image save mode. If the mode is save, then DCMMW indicates it to DCM, to save the image on to its(DCM's) FLASH memory. This saved image will be… |
| 1.3.6.1.4.1.18.3.3.2.16.1.6 | ScalarwfDCMmwCfgMode | read-write | obsolete | Specifies whether DCMMW should let DCM use the config info from the shared memory or use the config info from DCM's FLASH memory. If the mode is local, then DC… |
| 1.3.6.1.4.1.18.3.3.2.16.1.7 | ScalarwfDCMmwWriteConfigInfo | read-write | obsolete | DCMMW uses this object to specify DCM whether it should commit the configuration information into its Flash memory or not |
| 1.3.6.1.4.1.18.3.3.2.16.1.8 | ScalarwfDCMmwRMONMaxHost | read-write | obsolete | Indicates the maximum number of hosts each RMON host control entry on DCM will store. When the table reaches this value, entries will be deleted based on an LR… |
| 1.3.6.1.4.1.18.3.3.2.16.1.9 | ScalarwfDCMmwRMONDfltHost | read-write | obsolete | DCMMW uses this to specify DCM that it should create or not create the hostControlTable. If enabled DCMMW indicates DCM to create default host entries for the … |
| 1.3.6.1.4.1.18.3.3.2.16.1.10 | ScalarwfDCMmwRMONDfltMtrix | read-write | obsolete | DCMMW uses this to specify DCM that it should create or not create the matrixControlTable. If enabled DCMMW indicates DCM to create default matrix entries for … |
| 1.3.6.1.4.1.18.3.3.2.16.1.11 | ScalarwfDCMmwRMONHost | read-only | obsolete | This specifies the configured number of hosts in each RMON host control entry on DCM |
| 1.3.6.1.4.1.18.3.3.2.16.1.12 | ScalarwfDCMRmonAgent | read-only | obsolete | The state of the RMON agent. A ready state(1) indicates that the RMON agent instrumentation is up and ready to process SNMP requests |
| 1.3.6.1.4.1.18.3.3.2.16.1.13 | ScalarwfDCMMemSize | read-only | obsolete | This specifies DCM board's memory size. |
| 1.3.6.1.4.1.18.3.3.2.16.1.14 | ScalarwfDCMHwRev | read-only | obsolete | This specifies DCM board's HW revision number |
| 1.3.6.1.4.1.18.3.3.2.16.1.15 | ScalarwfDCMFwRev | read-only | obsolete | This specifies DCM board's FW revision number |
| 1.3.6.1.4.1.18.3.3.2.16.1.16 | ScalarwfDCMAgentImageVersion | read-only | obsolete | This specifies DCM board's Agent Image version number |
| 1.3.6.1.4.1.18.3.3.2.16.1.17 | ScalarwfDCMmwNumDCM | read-only | obsolete | This specifies how many DCMs are present |
| 1.3.6.1.4.1.18.3.3.2.16.2 | TablewfDCMTable | not-accessible | mandatory | Table containing DCM records |
| 1.3.6.1.4.1.18.3.3.2.16.2.1 | RowwfDCMEntry | not-accessible | mandatory | Information concerning a specific DCM entry. Each DCM entry corresponds to a physical probe. |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.1 | ColumnwfDCMDelete | read-write | mandatory | Create/Delete flag. Default is created. User can perform a set operation on this object to create/delete a DCMEntry instance. |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.2 | ColumnwfDCMIndex | read-only | mandatory | An index that uniquely identifies an entry in the DCM table. Each such entry defines one DCM. |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.3 | ColumnwfDCMDisable | read-write | mandatory | Enables or Disables the DCM |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.4 | ColumnwfDCMOperStatus | read-only | mandatory | This object indicates the operational state of the DCM |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.5 | ColumnwfDCMStreamCount | read-only | mandatory | This object indicates the number of Streams this DCM configured to support. |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.6 | ColumnwfDCMIntfType | read-only | mandatory | This object identifies the type of interface this DCM is configured to. |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.7 | ColumnwfDCMImageName | read-write | mandatory | A textual string to describe the name of the DCM image to be download on to the DCM. The image name should be a fully qualified filename. For ex: vol:filename. |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.8 | ColumnwfDCMBootOption | read-write | mandatory | Specifies DCM's image load mode to DCMMW. If the option specified is local, DCMMW will not load a new image to DCM's shared memory. If the option specified is … |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.9 | ColumnwfDCMImageSaveMode | read-write | mandatory | Specifies DCM's image save mode. If the mode is save, then DCMMW indicates it to DCM, to save the image on to its(DCM's) FLASH memory. This saved image will be… |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.10 | ColumnwfDCMCfgMode | read-write | mandatory | Specifies whether DCMMW should let DCM use the config info from the shared memory or use the config info from DCM's FLASH memory. If the mode is local, then DC… |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.11 | ColumnwfDCMSaveConfigInfo | read-write | mandatory | DCMMW uses this object to specify DCM whether it should commit the configuration information into its Flash memory or not |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.12 | ColumnwfDCMRMONMaxHost | read-write | mandatory | Indicates the maximum number of hosts each RMON host control entry on DCM will store. When the table reaches this value, entries will be deleted based on an LR… |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.13 | ColumnwfDCMRMONDfltHost | read-write | mandatory | DCMMW uses this to specify DCM that it should create or not create the hostControlTable. If enabled DCMMW indicates DCM to create default host entries for the … |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.14 | ColumnwfDCMRMONDfltMtrix | read-write | mandatory | DCMMW uses this to specify DCM that it should create or not create the matrixControlTable. If enabled DCMMW indicates DCM to create default matrix entries for … |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.15 | ColumnwfDCMRMONHost | read-only | mandatory | This specifies the configured number of hosts in each RMON host control entry on DCM |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.16 | ColumnwfDCMmemSize | read-only | mandatory | This specifies DCM board's memory size |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.17 | ColumnwfDCMhwRev | read-only | mandatory | This specifies DCM board's HW revision number |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.18 | ColumnwfDCMfwRev | read-only | mandatory | This specifies DCM board's FW revision number |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.19 | ColumnwfDCMagentImageVersion | read-only | mandatory | This specifies DCM board's Agent Image version number |
| 1.3.6.1.4.1.18.3.3.2.16.2.1.20 | ColumnwfDCMRmonObjectSupport | read-write | mandatory | Allows a user to specify whether they want to access RMON and RMON2 stats rmon2(2), or just RMON stats rmon(1) from a specific DCM. This attribute is only used… |
| 1.3.6.1.4.1.18.3.3.2.16.3 | TablewfDCMStreamTable | not-accessible | obsolete | Table containing DCM stream records |
| 1.3.6.1.4.1.18.3.3.2.16.3.1 | RowwfDCMStreamEntry | not-accessible | obsolete | Information concerning a specific DCM stream entry. Each stream entry corresponds to the interface the DCM is associated with. |
| 1.3.6.1.4.1.18.3.3.2.16.3.1.1 | ColumnwfDCMStreamDCMIndex | read-only | obsolete | An index that identifies the DCM entry of which this stream is associated with. |
| 1.3.6.1.4.1.18.3.3.2.16.3.1.2 | ColumnwfDCMStreamIndex | read-only | obsolete | An index that uniquely identifies the particular stream this entry is associated with. |
| 1.3.6.1.4.1.18.3.3.2.16.3.1.3 | ColumnwfDCMStreamDisable | read-only | obsolete | Enables or Disables DCM stream |
| 1.3.6.1.4.1.18.3.3.2.16.3.1.4 | ColumnwfDCMStreamDataSource | read-only | obsolete | This object identifies the source of the data that this DCM stream entry is configured to analyze. This is the ifIndex value of the stream(interface). |