Wellfleet-DLS-MIB
248 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.5.1 | NodewfDls | |||
| 1.3.6.1.4.1.18.3.5.1.5.1.1 | ScalarwfDlsDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.1.2 | ScalarwfDlsDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.1.3 | ScalarwfDlsState | read-only | mandatory | The current state of DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.1.4 | ScalarwfDlsTcpWindowSize | read-write | mandatory | The size in bytes of the windows used for the DLSw TCP connections |
| 1.3.6.1.4.1.18.3.5.1.5.1.5 | ScalarwfDlsVirtualRing | read-write | mandatory | The virtual ring number for the TCP/IP cloud. Valid values (1-4095) |
| 1.3.6.1.4.1.18.3.5.1.5.1.6 | ScalarwfDlsInternalLanId | read-write | mandatory | The source routing internal lan id. Valid Values (1-4095) |
| 1.3.6.1.4.1.18.3.5.1.5.1.7 | ScalarwfDlsBridgeId | read-write | mandatory | The source routing base bridge number. Valid Values (1-15) |
| 1.3.6.1.4.1.18.3.5.1.5.1.8 | ScalarwfDlsMaxSlotSessions | read-write | mandatory | The maximum number of LLC2 sessions to support per slot |
| 1.3.6.1.4.1.18.3.5.1.5.1.9 | ScalarwfDlsTotalCircuits | read-only | mandatory | A current count of the total number of DLSw circuits established |
| 1.3.6.1.4.1.18.3.5.1.5.1.10 | ScalarwfDlsVirtualRingMtu | read-write | mandatory | The MTU to use in explorers generated by this DLSw. It should reflect the minimum MTU size of the entire network including the remote LANs. Valid values (> 0) |
| 1.3.6.1.4.1.18.3.5.1.5.1.11 | ScalarwfDlsMacAgeTime | read-write | mandatory | The time in seconds before inactive MAC addresses will be aged out of the cache. Valid values (> 20) |
| 1.3.6.1.4.1.18.3.5.1.5.1.12 | ScalarwfDlsNbAgeTime | read-write | mandatory | The time in seconds before inactive NetBIOS names will be aged out of the cache. Valid values (> 20) |
| 1.3.6.1.4.1.18.3.5.1.5.1.13 | ScalarwfDlsUnconfPeerReject | read-write | mandatory | Allow establishment of TCP connections from peers not in the Peer Table |
| 1.3.6.1.4.1.18.3.5.1.5.1.14 | ScalarwfDlsDebugLevel1 | read-write | mandatory | First Level debug flag. Cannot be configured with Site Manager. When this flag is set to Zero, no debug messages will be logged. Each bit of this flag represen… |
| 1.3.6.1.4.1.18.3.5.1.5.1.15 | ScalarwfDlsDebugLevel2 | read-write | mandatory | Second Level debug flag. Cannot be configured with Site Manager. When this flag is set to Zero, no debug messages will be logged. Each bit of this flag represe… |
| 1.3.6.1.4.1.18.3.5.1.5.1.16 | ScalarwfDlsWanKeepaliveTime | read-write | mandatory | Keepalive packets will be sent into inactive, established TCP connections after this time interval (in seconds). A time of zero disables this keepalive feature. |
| 1.3.6.1.4.1.18.3.5.1.5.1.17 | ScalarwfDlsPPriDisable | read-write | mandatory | Protocol Prioritization Enable/Disable parameter. Default is disabled. Users perform an SNMP SET operation to enable/disable this feature. |
| 1.3.6.1.4.1.18.3.5.1.5.1.18 | ScalarwfDlsPPriDefaultNumQueues | read-write | mandatory | DLSw Prioritization Default number of Queues. The number of queues to be created when establishing a Peer connection if none have been previously defined. The … |
| 1.3.6.1.4.1.18.3.5.1.5.1.19 | ScalarwfDlsPPriDefaultQBandwidth | read-write | mandatory | DLSw Prioritization Default Queues Bandwidth. The bandwidth for each default queue. Default of: 60% queue 0, 40% queue 1 via site manager. |
| 1.3.6.1.4.1.18.3.5.1.5.1.20 | ScalarwfDlsPPriUnconfPeerDisable | read-write | mandatory | DLSw Prioritization enabled/disabled for peers not in Peer Table. |
| 1.3.6.1.4.1.18.3.5.1.5.1.21 | ScalarwfDlsPPriUnconfPeerMaxQBuf | read-write | mandatory | DLSw Prioritization enabled/disabled for peers not in Peer Table. |
| 1.3.6.1.4.1.18.3.5.1.5.1.22 | ScalarwfDlsPPriUnconfPeerMaxQSize | read-write | mandatory | DLSw Prioritization enabled/disabled for peers not in Peer Table. |
| 1.3.6.1.4.1.18.3.5.1.5.1.23 | ScalarwfDlsPkgMaxSize | read-write | mandatory | Maximum size of frame to sended over the WAN. Used when packaging multiple DLS frames into a single TCP frame. The value specified must be smaller than the wfD… |
| 1.3.6.1.4.1.18.3.5.1.5.1.24 | ScalarwfDlsPkgTO | read-write | mandatory | DLSw packaging Time-out. Number of msec to delay a package before sending to TCP. This value should be based on the WAN speed wfDlsPkgWinPercent (defined below… |
| 1.3.6.1.4.1.18.3.5.1.5.1.25 | ScalarwfDlsPkgWinPercent | read-write | mandatory | DLSw Packaging threshold. What percent of the DLS TCP window must be outstanding inorder to delay the sending of a package being built. Default: 20% of TCP win… |
| 1.3.6.1.4.1.18.3.5.1.5.1.26 | ScalarwfDlsMultislotBcasts | read-write | mandatory | Allow broadcasts inbound from the WAN to be broadcast to all active DLSw slots. |
| 1.3.6.1.4.1.18.3.5.1.5.1.27 | ScalarwfDlsInitialPacingWindow | read-write | mandatory | Initial pacing window to be advertised in Capabilities Exchange messages. Adaptive pacing will begin with this value and use the state of the network to find t… |
| 1.3.6.1.4.1.18.3.5.1.5.1.28 | ScalarwfDlsRfc | read-write | mandatory | DLSw RFC mode selection. - RFC1434 is the original implementation - RFC1795 provides improved interoperability and flow control - v20_unicast supports Canureac… |
| 1.3.6.1.4.1.18.3.5.1.5.1.29 | ScalarwfDlsNetbiosSessionAliveFilter | read-write | mandatory | Netbios session alive filter. |
| 1.3.6.1.4.1.18.3.5.1.5.1.30 | ScalarwfDlsWanKeepaliveRetryTimer | read-write | mandatory | KEEPALIVE retransmit timeout period, in seconds. This is the interval at which unacknowledged KEEPALIVE messages will be retransmitted. If the Idle Timer is se… |
| 1.3.6.1.4.1.18.3.5.1.5.1.31 | ScalarwfDlsWanKeepaliveRetries | read-write | mandatory | Number of unacknowledged KEEPALIVE messages retransmitted before the TCP session is terminated. If this count is set to zero, only one KEEPALIVE message will b… |
| 1.3.6.1.4.1.18.3.5.1.5.1.32 | ScalarwfDlsSnaFallbackAttempts | read-write | mandatory | Number of times CANUREACH_ex will be sent (for SNA based connections) before attempting to fall back. Used for peers configured as wfDlsPeerTransportType = unk… |
| 1.3.6.1.4.1.18.3.5.1.5.1.33 | ScalarwfDlsNetbiosFallbackTime | read-write | mandatory | Amount of time in sec before falling back to RFC 1795 for the peers configured with wfDlsPeerTransportType = unknown, if NETBIOS_NQ does not get answered. |
| 1.3.6.1.4.1.18.3.5.1.5.1.34 | ScalarwfDlsTcpInactTime | read-write | mandatory | Amount of time in sec after the last active DLSw circuit has terminated or there was no data transfered over TCP pipe, before bringing down TCP connection. Use… |
| 1.3.6.1.4.1.18.3.5.1.5.1.35 | ScalarwfDlsTcpInactMethod | read-write | mandatory | Determines when tcp connections may be brought down. Could be due to no DLS circuits on a peer, no data passing over the TCP link, or leave the TCP connection … |
| 1.3.6.1.4.1.18.3.5.1.5.1.36 | ScalarwfDlsMslotDLCBcasts | read-write | mandatory | Allow broadcast messages inbound from the DLC to be sent to all active DLSw slots. |
| 1.3.6.1.4.1.18.3.5.1.5.1.37 | ScalarwfDlsRsvpSupport | read-write | mandatory | Enables/Disables use of RSVP by DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.1.38 | ScalarwfDlsOutBandwidth | read-write | mandatory | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers |
| 1.3.6.1.4.1.18.3.5.1.5.1.39 | ScalarwfDlsOutBurstSize | read-write | mandatory | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers |
| 1.3.6.1.4.1.18.3.5.1.5.1.40 | ScalarwfDlsInBandwidth | read-write | mandatory | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers |
| 1.3.6.1.4.1.18.3.5.1.5.1.41 | ScalarwfDlsInBurstSize | read-write | mandatory | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers |
| 1.3.6.1.4.1.18.3.5.1.5.1.42 | ScalarwfDlsNonPeakOutBandwidth | read-write | mandatory | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.1.43 | ScalarwfDlsNonPeakOutBurstSize | read-write | mandatory | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.1.44 | ScalarwfDlsNonPeakInBandwidth | read-write | mandatory | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.1.45 | ScalarwfDlsNonPeakInBurstSize | read-write | mandatory | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.1.46 | ScalarwfDlsNonPeakStartTime | read-write | mandatory | Start time of the non-peak hours in hhmm format and 24 hour clock. If start time is greater in value than end time, non-peak hours ends the next day. |
| 1.3.6.1.4.1.18.3.5.1.5.1.47 | ScalarwfDlsNonPeakEndTime | read-write | mandatory | End time of the non-peak hours in hhmm 24 hour clock format |
| 1.3.6.1.4.1.18.3.5.1.5.1.48 | ScalarwfDlsNonPeakStartDays | read-write | mandatory | Bitmap of the starting days of the week for a non-peak reservations. The MSBit represents Sunday, the next most significant bit represents Monday, and so on...… |
| 1.3.6.1.4.1.18.3.5.1.5.1.49 | ScalarwfDlsMultislotCacheUpdate | read-write | mandatory | Allow learned MAC-IP cache resolutions to be promulgated to all other DLSw slots. |
| 1.3.6.1.4.1.18.3.5.1.5.1.50 | ScalarwfDlsMacAddrTranslation | read-write | mandatory | Enables/Disables use of Mac Address Translation by DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.1.51 | ScalarwfDlsBan2Support | read-write | mandatory | Enables/Disables BAN-2 local termination between SRB interfaces in single DLS switch configs |
| 1.3.6.1.4.1.18.3.5.1.5.1.52 | ScalarwfDlsVirtualRingBridgeCheck | read-write | mandatory | DLSw Virtual Ring ID and SRB Bridge ID will be checked. |
| 1.3.6.1.4.1.18.3.5.1.5.1.53 | ScalarwfDlsAcceptBadVendorSpecificCapex | read-write | mandatory | Accept a capex request containing a Vendor Specific Control Vector but no Vendor Context. The Control Vector will be ignored |
| 1.3.6.1.4.1.18.3.5.1.5.1.54 | ScalarwfDlsDiagSwitch | read-write | mandatory | Available MIB for diagnostic workspaces. Allows optional conditional debugging |
| 1.3.6.1.4.1.18.3.5.1.5.1.55 | ScalarwfDlsAllowSpecAddrNbDatagram | read-write | mandatory | Allows acceptance of NETBIOS Datagrams sent to other than the NETBIOS Group address as the destination MAC address. This is an override MIB. When enabled, DLS … |
| 1.3.6.1.4.1.18.3.5.1.5.2 | TablewfDlsInterfaceTable | not-accessible | mandatory | A table that contains information about every interface that is associated with DLSw inst_id[1] = wfDlsInterfaceCircuit |
| 1.3.6.1.4.1.18.3.5.1.5.2.1 | RowwfDlsInterfaceEntry | not-accessible | mandatory | An entry in wfDlsInterface |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.1 | ColumnwfDlsInterfaceDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an interface |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.2 | ColumnwfDlsInterfaceDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an interface |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.3 | ColumnwfDlsInterfaceState | read-only | mandatory | The current state of the interface |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.4 | ColumnwfDlsInterfaceCircuit | read-only | mandatory | The circuit that this interface runs over |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.5 | ColumnwfDlsInterfaceBridgeId | read-write | mandatory | The Bridge Id of the 'bridge' from the internal Lan to the TCP/IP ring. This must be a non-Wellfleet bridge number. Valid Values (1-15) |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.6 | ColumnwfDlsInterfaceLanId | read-write | mandatory | The Lan Id of the interface. Valid Values (1-4095) |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.7 | ColumnwfDlsInterfaceDlcType | read-write | mandatory | The Data Link Control Type on this interface. |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.8 | ColumnwfDlsInterfaceSdlcMode | read-write | mandatory | The SDLC Mode on this interface. |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.9 | ColumnwfDlsInterfaceNbBcastDgramReduce | read-write | mandatory | This allows the NetBios Broadcast dgram reduction code built into dls to be turned off. |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.10 | ColumnwfDlsInterfaceExplorerType | read-write | mandatory | This allows CANUREACH test frames to be sent as single-route or all-routes explorer frames. |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.11 | ColumnwfDlsInterfaceNbBcastDgramCache | read-write | mandatory | This allows Netbios Broadcast datagram frames to be cached along with allowing these same frames to utilize the netbios caching mechanism. Value 1 means featur… |
| 1.3.6.1.4.1.18.3.5.1.5.2.1.12 | ColumnwfDlsInterfaceClrCallEnable | read-write | mandatory | This allows a generic (e.g. QLLC/X25) call to be cleared when the DLS connection enters a DISCONNECTED state. |
| 1.3.6.1.4.1.18.3.5.1.5.3 | TablewfDlsSlotTable | not-accessible | mandatory | A table that contains the IP interfaces each slot must use for the TCP connections to non-Wellfleet switches. The IP interface may exist anywhere on the box. i… |
| 1.3.6.1.4.1.18.3.5.1.5.3.1 | RowwfDlsSlotEntry | not-accessible | mandatory | An entry in wfDlsSlot |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.1 | ColumnwfDlsSlotDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLSw slot IP record |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.2 | ColumnwfDlsSlotNumber | read-only | mandatory | The slot that uses this IP interface |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.3 | ColumnwfDlsSlotIpAddr | read-write | mandatory | The IP interface to use for TCP connections based on this slot |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.4 | ColumnwfDlsCurrentMemory | read-only | mandatory | Memory currently available on this slot |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.5 | ColumnwfDlsMaxAllowedMemory | read-write | mandatory | Maximum amount of memory allowed to be allocated for DLS on this slot. 4294967295 = 0xFFFFFFFF stands for infinite. (i.e. all available memory) |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.6 | ColumnwfDlsHiWaterMark | read-only | mandatory | This is the maximum amount of memory ever allocated by DLS on this slot since the last boot |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.7 | ColumnwfDlsSlotGenDestination | read-write | mandatory | This is a destination slot of the GEN tool if the value is 0. For any non-zero number, the slot is a GEN source and the value of wfDlsSlotGenDestination is its… |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.8 | ColumnwfDlsSlotGenSessions | read-write | mandatory | The maximum number of Generator sessions to support per slot |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.9 | ColumnwfDlsSlotGenUpperMAC | read-write | mandatory | The upper MAC address for this slot. |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.10 | ColumnwfDlsSlotCurrentSessions | read-only | mandatory | The number of sessions connected on this slot. |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.11 | ColumnwfDlsSlotHiWaterSessions | read-only | mandatory | The highest number of sessions connected at one time on this slot. |
| 1.3.6.1.4.1.18.3.5.1.5.3.1.12 | ColumnwfDlsSlotHiWaterReset | read-write | mandatory | Setting to 2 (reset) sets HiWaterSessions to CurrentSessions. |
| 1.3.6.1.4.1.18.3.5.1.5.4 | TablewfDlsSapTable | not-accessible | mandatory | A table that contains the SAPS to be terminated by DLSw. inst_id[1] = wfDlsSapAddr |
| 1.3.6.1.4.1.18.3.5.1.5.4.1 | RowwfDlsSapEntry | not-accessible | mandatory | An entry in wfDlsSap |
| 1.3.6.1.4.1.18.3.5.1.5.4.1.1 | ColumnwfDlsSapDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLSw SAP record |
| 1.3.6.1.4.1.18.3.5.1.5.4.1.2 | ColumnwfDlsSapAddr | read-only | mandatory | The SAP to be terminated by DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.4.1.3 | ColumnwfDlsSapCredit | read-write | mandatory | The LLC2 flow control credit size for this SAP. Flow control procedures will be invoked based on this parameter |
| 1.3.6.1.4.1.18.3.5.1.5.5 | TablewfDlsPeerTable | not-accessible | mandatory | A table that contains the IP addresses of the DLSw peers with which we will establish TCP connections. inst_id[4] = wfDlsPeerAddr |
| 1.3.6.1.4.1.18.3.5.1.5.5.1 | RowwfDlsPeerEntry | not-accessible | mandatory | An entry in wfDlsPeer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.1 | ColumnwfDlsPeerDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLSw peer record |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.2 | ColumnwfDlsPeerState | read-only | mandatory | The current state of the TCP connection with this DLSw peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.3 | ColumnwfDlsPeerIpAddr | read-only | mandatory | The IP address of the DLSw peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.4 | ColumnwfDlsPeerDefinedBy | read-only | mandatory | The method by which this peer was defined |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.5 | ColumnwfDlsPeerPPriDisable | read-write | mandatory | DLSw Protocol Priority enabled/disabled for this Peer. The default is to use the value specified in the DLS Base record (wfDlsPPriDisable). Site Manager handle… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.6 | ColumnwfDlsPeerPPriMaxQBuf | read-write | mandatory | Protocol Priority Queue Maximum number of allocated buffers queued. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.7 | ColumnwfDlsPeerPPriMaxQSize | read-write | mandatory | Protocol Priority Queue Maximum number of octets queued. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.8 | ColumnwfDlsPeerPPriClearStats | read-write | mandatory | Clear Protocol Priority Statistics. If prioritization is enabled for this Peer, then modifying this attribute will cause all Statistics kept (Queue's, CC, etc)… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.9 | ColumnwfDlsPeerType | read-only | mandatory | The protocol type of this DLSw peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.10 | ColumnwfDlsPeerTransportType | read-write | mandatory | The transport type of this DLSw peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.11 | ColumnwfDlsPeerBackupConfig | read-write | mandatory | The indication of whether or not a backup peer is to be configured for the primary peer. The default is no which means that there is no backup peer configured … |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.12 | ColumnwfDlsPeerBackupIpAddr | read-write | mandatory | The IP Address of the backup DLSw peer. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.13 | ColumnwfDlsPeerBackupMaxUpTime | read-write | mandatory | The maximum amount of time (in seconds) allowed for a TCP connection to stay established to the backup DLSw peer. If set to zero, this feature is disabled. Set… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.14 | ColumnwfDlsPeerBackupHoldDownTime | read-write | mandatory | The amount of time (in seconds) to wait before starting a new TCP connection to the backup DLSw peer. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.15 | ColumnwfDlsPeerBackupStartTime | read-write | mandatory | Used in conjunction with the EndTime attribute. Together these define a time interval for when a backup peer can be active. The start time is the beginning tim… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.16 | ColumnwfDlsPeerBackupEndTime | read-write | mandatory | Used in conjunction with the StartTime attribute. Together these define a time interval for when a backup peer can be active. The end time is the end time of d… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.17 | ColumnwfDlsPeerInteroperability | read-write | mandatory | If enabled, open write to read tcp connection for 1434 and 1795 type of peers. Let the other side to open the other connection. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.18 | ColumnwfDlsPeerBackupType | read-write | mandatory | The type of this DLSw backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.19 | ColumnwfDlsPeerRsvpMode | read-write | mandatory | Defines rsvp mode of operation for the peer: - 1 use rsvp parameters configured in the peer; - 2 do NOT use rsvp for this peer; - 3 use rsvp parameters configu… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.20 | ColumnwfDlsPeerRsvpSlots | read-write | mandatory | Bit mask field representing the slots, that may make RSVP resevations for this peer. The MSBit represents slot 1, the next most significant bit represents slot… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.21 | ColumnwfDlsPeerOutBandwidth | read-write | mandatory | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for this peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.22 | ColumnwfDlsPeerOutBurstSize | read-write | mandatory | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for this peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.23 | ColumnwfDlsPeerInBandwidth | read-write | mandatory | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for this peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.24 | ColumnwfDlsPeerInBurstSize | read-write | mandatory | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for this peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.25 | ColumnwfDlsPeerNonPeakOutBandwidth | read-write | mandatory | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for this peer during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.26 | ColumnwfDlsPeerNonPeakOutBurstSize | read-write | mandatory | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for this peer during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.27 | ColumnwfDlsPeerNonPeakInBandwidth | read-write | mandatory | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for this peer during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.28 | ColumnwfDlsPeerNonPeakInBurstSize | read-write | mandatory | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for this peer during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.29 | ColumnwfDlsPeerNonPeakStartTime | read-write | mandatory | Start time of the non-peak hours in hhmm format and 24 hour clock. If start time is greater in value than end time, non-peak hours ends the next day. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.30 | ColumnwfDlsPeerNonPeakEndTime | read-write | mandatory | End time of the non-peak hours in hhmm 24 hour clock format |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.31 | ColumnwfDlsPeerNonPeakStartDays | read-write | mandatory | Bitmap of the starting days of the week for a non-peak reservations. The MSBit represents Sunday, the next most significant bit represents Monday, and so on...… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.32 | ColumnwfDlsPeerBackupOutBandwidth | read-write | mandatory | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for the backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.33 | ColumnwfDlsPeerBackupOutBurstSize | read-write | mandatory | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for the backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.34 | ColumnwfDlsPeerBackupInBandwidth | read-write | mandatory | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for the backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.35 | ColumnwfDlsPeerBackupInBurstSize | read-write | mandatory | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for the backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.6 | TablewfDlsConnectionTable | not-accessible | mandatory | A table that contains the information about the current DLSw connections in progress. inst_id[15] = wfDlsConnectionCct wfDlsConnectionSrcMac wfDlsConnectionDst… |
| 1.3.6.1.4.1.18.3.5.1.5.6.1 | RowwfDlsConnectionEntry | not-accessible | mandatory | An entry in wfDlsConnection |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.1 | ColumnwfDlsConnectionCct | read-only | mandatory | The circuit this from which this connection originated |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.2 | ColumnwfDlsConnectionDstMac | read-only | mandatory | The Destination MAC address (the LLC session target) |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.3 | ColumnwfDlsConnectionSrcMac | read-only | mandatory | The Source MAC address (the LLC session originator) |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.4 | ColumnwfDlsConnectionSaps | read-only | mandatory | The SAPs for this connection (DSAP, SSAP) |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.5 | ColumnwfDlsConnectionState | read-only | mandatory | The DLSw state of this connection. These are the steady states of the DLSw state machine. Transition states are not reflected |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.6 | ColumnwfDlsConnectionRemoteIpAddr | read-only | mandatory | The IP address of the remote DLSw peer over which this connection is established |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.7 | ColumnwfDlsConnectionRemoteRxPort | read-only | mandatory | The TCP receive port number of the remote DLSw peer over which this connection is established |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.8 | ColumnwfDlsConnectionLocalIpAddr | read-only | mandatory | The IP address of the local DLSw peer over which this connection is established |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.9 | ColumnwfDlsConnectionLocalTxPort | read-only | mandatory | The TCP transmit port number of the local DLSw peer over which this connection is established |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.10 | ColumnwfDlsConnectionTxIFrames | read-only | mandatory | The number of Information frames transmitted from this switch to the remote DLSw switch |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.11 | ColumnwfDlsConnectionRxIFrames | read-only | mandatory | The number of Information frames received at this switch from the remote DLSw switch |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.12 | ColumnwfDlsConnectionTxRnrs | read-only | mandatory | The number of RNR frames transmitted from this switch to the remote DLSw switch |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.13 | ColumnwfDlsConnectionRxRnrs | read-only | mandatory | The number of RNR frames received at this switch from the remote DLSw switch |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.14 | ColumnwfDlsConnectionLocalBlockNum | read-only | mandatory | The block number is the first 3 hexadecimal digits of node identification field of local XID |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.15 | ColumnwfDlsConnectionLocalIdNum | read-only | mandatory | The ID number is the last 5 hexadecimal digits of node identification field of local XID |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.16 | ColumnwfDlsConnectionLocalCpName | read-only | mandatory | The local CP name |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.17 | ColumnwfDlsConnectionRif | read-only | mandatory | The Rif information |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.18 | ColumnwfDlsConnectionRemoteBlockNum | read-only | mandatory | The block number is the first 3 hexadecimal digits of node identification field of remote XID |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.19 | ColumnwfDlsConnectionRemoteIdNum | read-only | mandatory | The ID number is the last 5 hexadecimal digits of node identification field of remote XID |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.20 | ColumnwfDlsConnectionRemoteCpName | read-only | mandatory | The remote CP name |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.21 | ColumnwfDlsConnectionLocalDLCorr | read-only | mandatory | The local Data Link Correlator for this DLSw circuit |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.22 | ColumnwfDlsConnectionKilled | read-write | mandatory | Set to Dead to delete a connection |
| 1.3.6.1.4.1.18.3.5.1.5.6.1.23 | ColumnwfDlsConnectionRemoteDLCorr | read-only | mandatory | The remote Data Link Correlator for this DLSw circuit |
| 1.3.6.1.4.1.18.3.5.1.5.7 | TablewfDlsNbTable | not-accessible | mandatory | The DLSw NetBIOS name cache table. inst_id[16] = wfDlsNbName |
| 1.3.6.1.4.1.18.3.5.1.5.7.1 | RowwfDlsNbEntry | not-accessible | mandatory | An entry in wfDlsNb |
| 1.3.6.1.4.1.18.3.5.1.5.7.1.1 | ColumnwfDlsNbName | read-only | mandatory | The NetBIOS name of the remote station. Names that are shorter than 16 characters are padded with ASCII spaces (0x20) |
| 1.3.6.1.4.1.18.3.5.1.5.7.1.2 | ColumnwfDlsNbPeerIpAddr | read-only | mandatory | The IP address of the DLSw peer for this NetBIOS name |
| 1.3.6.1.4.1.18.3.5.1.5.7.1.3 | ColumnwfDlsNbCapablePeerIpAddr | read-only | mandatory | The IP address of the DLSw peer for a capable NetBIOS name |
| 1.3.6.1.4.1.18.3.5.1.5.7.1.4 | ColumnwfDlsNbQueries | read-only | mandatory | The number of NETBIOS_NQ queries sent for this name |
| 1.3.6.1.4.1.18.3.5.1.5.8 | TablewfDlsMacTable | not-accessible | mandatory | The DLSw MAC address cache table. inst_id[6] = wfDlsMacAddr |
| 1.3.6.1.4.1.18.3.5.1.5.8.1 | RowwfDlsMacEntry | not-accessible | mandatory | An entry in wfDlsMac |
| 1.3.6.1.4.1.18.3.5.1.5.8.1.1 | ColumnwfDlsMacAddr | read-only | mandatory | The MAC address of the remote station |
| 1.3.6.1.4.1.18.3.5.1.5.8.1.2 | ColumnwfDlsMacPeerIpAddr | read-only | mandatory | The IP address of the DLSw peer for this MAC address |
| 1.3.6.1.4.1.18.3.5.1.5.8.1.3 | ColumnwfDlsMacCapablePeerIpAddr | read-only | mandatory | The IP address of the DLSw peer for a capable MAC address |
| 1.3.6.1.4.1.18.3.5.1.5.8.1.4 | ColumnwfDlsMacQueries | read-only | mandatory | The number of CANUREACH queries sent for this name |
| 1.3.6.1.4.1.18.3.5.1.5.9 | TablewfDlsTrafficFilterTable | not-accessible | mandatory | DLSw Traffic Filters |
| 1.3.6.1.4.1.18.3.5.1.5.9.1 | RowwfDlsTrafficFilterEntry | not-accessible | mandatory | An entry in WfDlsTrafficFilterTable |
| 1.3.6.1.4.1.18.3.5.1.5.9.1.1 | ColumnwfDlsTrafficFilterCreate | read-write | mandatory | Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted |
| 1.3.6.1.4.1.18.3.5.1.5.9.1.2 | ColumnwfDlsTrafficFilterEnable | read-write | mandatory | Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule |
| 1.3.6.1.4.1.18.3.5.1.5.9.1.3 | ColumnwfDlsTrafficFilterStatus | read-only | mandatory | Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error… |
| 1.3.6.1.4.1.18.3.5.1.5.9.1.4 | ColumnwfDlsTrafficFilterCounter | read-only | mandatory | The number of received packets that have matched this rule |
| 1.3.6.1.4.1.18.3.5.1.5.9.1.5 | ColumnwfDlsTrafficFilterDefinition | read-write | mandatory | The filter rule definition |
| 1.3.6.1.4.1.18.3.5.1.5.9.1.6 | ColumnwfDlsTrafficFilterReserved | read-only | mandatory | Reserved field |
| 1.3.6.1.4.1.18.3.5.1.5.9.1.7 | ColumnwfDlsTrafficFilterCircuit | read-only | mandatory | The ID of the Bridge Circuit to which the filter is applied |
| 1.3.6.1.4.1.18.3.5.1.5.9.1.8 | ColumnwfDlsTrafficFilterRuleNumber | read-only | mandatory | ID for the rule |
| 1.3.6.1.4.1.18.3.5.1.5.9.1.9 | ColumnwfDlsTrafficFilterFragment | read-only | mandatory | Fragment number - for large rules |
| 1.3.6.1.4.1.18.3.5.1.5.9.1.10 | ColumnwfDlsTrafficFilterName | read-write | mandatory | name of the rule number |
| 1.3.6.1.4.1.18.3.5.1.5.10 | TablewfDlsDefaultMacTable | not-accessible | mandatory | A table that contains DLSw Peer IP addresses for statically defined remote MAC addresses. The IP address in this table will always be used for CANUREACH messag… |
| 1.3.6.1.4.1.18.3.5.1.5.10.1 | RowwfDlsDefaultMacEntry | not-accessible | mandatory | An entry in wfDlsNbName |
| 1.3.6.1.4.1.18.3.5.1.5.10.1.1 | ColumnwfDlsDefaultMacDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLSw Default MAC record |
| 1.3.6.1.4.1.18.3.5.1.5.10.1.2 | ColumnwfDlsDefaultMacAddr | read-only | mandatory | The MAC address of the destination station |
| 1.3.6.1.4.1.18.3.5.1.5.10.1.3 | ColumnwfDlsDefaultMacPeerIp | read-write | mandatory | The peer IP address to use for this MAC address |
| 1.3.6.1.4.1.18.3.5.1.5.11 | TablewfDlsDefaultNbTable | not-accessible | mandatory | A table that contains DLSw Peer IP addresses for statically defined remote NetBIOS names. The IP address in this table will always be used for CANUREACH messag… |
| 1.3.6.1.4.1.18.3.5.1.5.11.1 | RowwfDlsDefaultNbEntry | not-accessible | mandatory | An entry in wfDlsDefaultNb |
| 1.3.6.1.4.1.18.3.5.1.5.11.1.1 | ColumnwfDlsDefaultNbDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLSw Default NetBIOS record |
| 1.3.6.1.4.1.18.3.5.1.5.11.1.2 | ColumnwfDlsDefaultNbName | read-only | mandatory | The NetBIOS name of the destination station |
| 1.3.6.1.4.1.18.3.5.1.5.11.1.3 | ColumnwfDlsDefaultNbPeerIp | read-write | mandatory | The peer IP address to use for this NetBIOS name |
| 1.3.6.1.4.1.18.3.5.1.5.12 | TablewfDlsLocalDeviceTable | not-accessible | mandatory | The configuration table for devices locally terminated through DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.12.1 | RowwfDlsLocalDeviceEntry | not-accessible | mandatory | An entry in the DLSw Local Device table |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.1 | ColumnwfDlsLocalDeviceDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLSw Local Device |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.2 | ColumnwfDlsLocalDeviceDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable a DLSw Local Device |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.3 | ColumnwfDlsLocalDeviceState | read-only | mandatory | The current state of DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.4 | ColumnwfDlsLocalDeviceCct | read-only | mandatory | The circuit on which this device is configured. Valid range (1-1023) |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.5 | ColumnwfDlsLocalDeviceAddr | read-only | mandatory | The physical address for this device. Valid range is based on media |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.6 | ColumnwfDlsLocalDeviceSourceMac | read-write | mandatory | The source MAC address of an emulated Token Ring end station for this device. Values are standard MSB Token Ring MAC addresses |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.7 | ColumnwfDlsLocalDeviceSourceSap | read-write | mandatory | The source SAP of an emulated Token Ring end station for this device. Values are standard SNA SAPs |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.8 | ColumnwfDlsLocalDeviceDestMac | read-write | mandatory | The destination MAC address for this device. Values are standard MSB Token Ring MAC addresses |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.9 | ColumnwfDlsLocalDeviceDestSap | read-write | mandatory | The destination SAP for this device. Values are standard SNA SAPs |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.10 | ColumnwfDlsLocalDeviceXidValue | read-write | mandatory | The station XID value. Value must match the IDBLK and IDNUM on the host |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.11 | ColumnwfDlsLocalDeviceCanureachTimer | read-write | mandatory | The time interval in seconds that a canureach is sent to the remote DLS peer to establish a session. A minimum value of 1 means that a canureach will be transm… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.12 | ColumnwfDlsLocalDeviceCanureachRetries | read-write | mandatory | The maximum number of times a canureach is sent to the remote DLS peer to establish a session. A minimum value of 0 means that no canureach messages will be tr… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.13 | ColumnwfDlsLocalDeviceLSTimer | read-write | mandatory | The time interval in seconds that a connect request is sent to the local SDLC device to establish a session. A minimum value of 1 means that a connect request … |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.14 | ColumnwfDlsLocalDeviceLSRetries | read-write | mandatory | The maximum number of times a connect request is sent to the local SDLC device to establish a session. A minimum value of 0 means that no connect requests will… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.15 | ColumnwfDlsLocalDeviceRcvCredit | read-write | mandatory | Receive credit count. Maximum number of frames SDLC is allowed to send to DLS. A minimum value of 1 means that DLS will only accept up to 1 frame from SDLC bef… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.16 | ColumnwfDlsLocalDeviceTxCredit | read-write | mandatory | Transmit credit count. Maximum number of frames DLS is allowed to send to SDLC. A minimum value of 1 means that DLS can only send one frame to SDLC until it re… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.17 | ColumnwfDlsLocalDeviceCurTimer2 | read-write | mandatory | The time interval in seconds that a canureach is sent to the remote DLS peer to establish a session. A minimum value of 1 means that a canureach will be transm… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.18 | ColumnwfDlsLocalDeviceCurRetries2 | read-write | mandatory | The maximum number of times a canureach is sent to the remote DLS peer to establish a session. A minimum value of 0 means that no canureach messages will be tr… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.19 | ColumnwfDlsLocalDeviceEnableXidPassthru | read-write | mandatory | XID passthru Enable/Disable parameter. Default is enabled. Used for pu2.1 circuits to allow the XID to be passed thru to SDLC when host is connected to token r… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.20 | ColumnwfDlsLocalDeviceActivationSequence | read-write | mandatory | Sequence of activation for SDLC PU2.0 fixed format primary devices. LocalDeviceFirst specifies that DLS establishes a connection with the SDLC End Station firs… |
| 1.3.6.1.4.1.18.3.5.1.5.13 | TablewfDlsLocalCircuitTable | not-accessible | mandatory | communicate with each other via a virtual circuit gate |
| 1.3.6.1.4.1.18.3.5.1.5.13.1 | RowwfDlsLocalCircuitEntry | not-accessible | mandatory | An entry in the DLSw Local Circuit table |
| 1.3.6.1.4.1.18.3.5.1.5.13.1.1 | ColumnwfDlsLocalCircuitDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.1.5.13.1.2 | ColumnwfDlsLocalCircuitDisable | read-write | mandatory | Disable parameter |
| 1.3.6.1.4.1.18.3.5.1.5.13.1.3 | ColumnwfDlsLocalCircuitState | read-only | mandatory | Circuit state |
| 1.3.6.1.4.1.18.3.5.1.5.13.1.4 | ColumnwfDlsLocalCircuitCct | read-write | mandatory | Local Circuit ID |
| 1.3.6.1.4.1.18.3.5.1.5.13.1.5 | ColumnwfDlsLocalCircuitClientCount | read-only | mandatory | Number of clients registerd |
| 1.3.6.1.4.1.18.3.5.1.5.13.1.6 | ColumnwfDlsLocalCircuitFrameCount | read-only | mandatory | Total number of frames passed |
| 1.3.6.1.4.1.18.3.5.1.5.13.1.7 | ColumnwfDlsLocalCircuitSlot | read-write | mandatory | Slot on which this cct resides |
| 1.3.6.1.4.1.18.3.5.1.5.13.1.8 | ColumnwfDlsLocalCctDefaultMac | read-write | mandatory | Default Mac address associated with this circuit |
| 1.3.6.1.4.1.18.3.5.1.5.14 | TablewfDlsGenToolTable | not-accessible | mandatory | A table that contains the Gen Tool characteristics to be used on Bay Network Routers. inst_id[1] = wfDlsSlotNumber |
| 1.3.6.1.4.1.18.3.5.1.5.14.1 | RowwfDlsGenToolEntry | not-accessible | mandatory | An characteristics for wfDlsGenTool |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.1 | ColumnwfDlsGenDelete | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.2 | ColumnwfDlsGenDisable | read-write | mandatory | Enable/Disable parameter. Default is disabled. Users perform an SNMP SET operation on this object in order to enable/disable DLSw Generat or |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.3 | ColumnwfDlsGenDefaultSessions | read-write | mandatory | Number of DLSw Generator Sessions to be brought up if specific numbers are not configured per slot. |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.4 | ColumnwfDlsGenStartupTime | read-write | mandatory | Time between connection setup requests in milliseconds. |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.5 | ColumnwfDlsGenIFramePerSec | read-write | mandatory | Number of I frames to be sent per second. |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.6 | ColumnwfDlsGenMacAddrOffset | read-write | mandatory | Offset for MAC addresses to be created for GEN. |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.7 | ColumnwfDlsGenVariableDstMAC | read-write | mandatory | Allows varying destination MAC address. |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.8 | ColumnwfDlsGenDefaultUpperMAC | read-write | mandatory | Allows varying upper MAC address. |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.9 | ColumnwfDlsGenDataLength | read-write | mandatory | Gen data frame size |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.10 | ColumnwfDlsGenNumSapPerMac | read-write | mandatory | Gen number of saps for each mac |
| 1.3.6.1.4.1.18.3.5.1.5.14.1.11 | ColumnwfDlsGenSapIncrement | read-write | mandatory | Gen sap incremental value |
| 1.3.6.1.4.1.18.3.5.1.5.15 | TablewfDlsMcastIpTable | not-accessible | mandatory | A table that contains the Multicast IP addresses that will be used by DLSw ro send and receive explorer traffic. |
| 1.3.6.1.4.1.18.3.5.1.5.15.1 | RowwfDlsMcastIpEntry | not-accessible | mandatory | An entry in the wfDlsMcastIpTable |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.1 | ColumnwfDlsMcastIpDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLSw multicast IP record |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.2 | ColumnwfDlsMcastIpState | read-only | mandatory | The current state of this DLSw McastIpEntry. Active indicates that it is possible to accept or sent CURs to/from the multicast IP group address specified in th… |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.3 | ColumnwfDlsMcastIpAddr | read-only | mandatory | The Multicast IP address of this entry |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.4 | ColumnwfDlsMcastIpSlots | read-write | mandatory | Bit mask field representing the slots upon which this DlsMcastIpEntry can receive and transmit multicast data. The MSBit represents slot 1, the next most signi… |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.5 | ColumnwfDlsMcastIpBackupConfig | read-write | mandatory | The indication of whether or not a backup peer is to be configured for the primary peer. The default is no which means that there is no backup peer configured … |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.6 | ColumnwfDlsMcastIpBackupIpAddr | read-write | mandatory | The IP Address of the backup DLSw peer. |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.7 | ColumnwfDlsMcastIpBackupMaxUpTime | read-write | mandatory | The maximum amount of time (in seconds) allowed for a TCP connection to stay established to the backup DLSw peer. If set to zero, this feature is disabled. Set… |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.8 | ColumnwfDlsMcastIpBackupHoldDownTime | read-write | mandatory | The amount of time (in seconds) to wait before starting a new TCP connection to the backup DLSw peer. |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.9 | ColumnwfDlsMcastIpBackupStartTime | read-write | mandatory | Used in conjunction with the EndTime attribute. Together these define a time interval for when a backup peer can be active. The start time is the beginning tim… |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.10 | ColumnwfDlsMcastIpBackupEndTime | read-write | mandatory | Used in conjunction with the StartTime attribute. Together these define a time interval for when a backup peer can be active. The end time is the end time of d… |
| 1.3.6.1.4.1.18.3.5.1.5.15.1.11 | ColumnwfDlsMcastIpBackupType | read-write | mandatory | The type of this DLSw backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.16 | TablewfDlsTranslateMacTable | not-accessible | mandatory | A table that contains destination MAC addresses which can be replaced with another remote MAC addresses. These new MAC addresses will be used to establish SNA … |
| 1.3.6.1.4.1.18.3.5.1.5.16.1 | RowwfDlsTranslateMacEntry | not-accessible | mandatory | An entry in wfDlsTranslateMacTable |
| 1.3.6.1.4.1.18.3.5.1.5.16.1.1 | ColumnwfDlsTranslateMacDelete | read-write | mandatory | Create/Delete parameter. Translate is created. |
| 1.3.6.1.4.1.18.3.5.1.5.16.1.2 | ColumnwfDlsOriginDestMacAddr | read-only | mandatory | The originally configured MAC address of the destination station |
| 1.3.6.1.4.1.18.3.5.1.5.16.1.3 | ColumnwfDlsTranslateDestMacAddr | read-write | mandatory | The translated MAC address of the destination station |