Wellfleet-DS3-MIB
66 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.13.1 | TablewfDs3Config | not-accessible | mandatory | The DS3 Configuration table |
| 1.3.6.1.4.1.18.3.4.13.1.1 | RowwfDs3ConfigEntry | not-accessible | mandatory | per circuit DS3 configuration objects; wfDs3LineIndex corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.1.1.1 | ColumnwfDs3LineIndex | read-only | mandatory | this corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.1.1.2 | ColumnwfDs3TimeElapsed | read-only | mandatory | 1..900 seconds within the current 15-minute interval |
| 1.3.6.1.4.1.18.3.4.13.1.1.3 | ColumnwfDs3ValidIntervals | read-only | mandatory | 0..96 previous intervals that valid data were collected. This is 96 unless the CSU device was brought on line within the last 24 hours. |
| 1.3.6.1.4.1.18.3.4.13.1.1.4 | ColumnwfDs3LineType | read-only | mandatory | the variety of DS3 implementing this circuit |
| 1.3.6.1.4.1.18.3.4.13.1.1.5 | ColumnwfDs3ZeroCoding | read-only | mandatory | the variety of Zero Code Suppression used on the link |
| 1.3.6.1.4.1.18.3.4.13.1.1.6 | ColumnwfDs3SendCode | read-only | mandatory | the type of code being sent across the DS3 circuit by the CSU |
| 1.3.6.1.4.1.18.3.4.13.1.1.7 | ColumnwfDs3CircuitIdentifier | read-only | mandatory | the transmission vendor's circuit identifier |
| 1.3.6.1.4.1.18.3.4.13.1.1.8 | ColumnwfDs3LoopbackConfig | read-only | mandatory | the loopback state of the CSU |
| 1.3.6.1.4.1.18.3.4.13.1.1.9 | ColumnwfDs3LineStatus | read-only | mandatory | the state of the DS3 line |
| 1.3.6.1.4.1.18.3.4.13.2 | TablewfDs3Current | not-accessible | mandatory | The DS3 Current table |
| 1.3.6.1.4.1.18.3.4.13.2.1 | RowwfDs3CurrentEntry | not-accessible | mandatory | per circuit DS3 current objects - wfDs3CurrentIndex corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.2.1.1 | ColumnwfDs3CurrentIndex | read-only | mandatory | this corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.2.1.2 | ColumnwfDs3CurrentESs | read-only | mandatory | the count of errored seconds in the current interval |
| 1.3.6.1.4.1.18.3.4.13.2.1.3 | ColumnwfDs3CurrentSESs | read-only | mandatory | the count of severely errored seconds in the current interval |
| 1.3.6.1.4.1.18.3.4.13.2.1.4 | ColumnwfDs3CurrentSEFs | read-only | mandatory | the count of severely errored framing seconds in the current interval |
| 1.3.6.1.4.1.18.3.4.13.2.1.5 | ColumnwfDs3CurrentUASs | read-only | mandatory | the number of unavailable seconds in the current interval |
| 1.3.6.1.4.1.18.3.4.13.2.1.6 | ColumnwfDs3CurrentBPVs | read-only | mandatory | the count of bipolar violations in the current interval |
| 1.3.6.1.4.1.18.3.4.13.2.1.7 | ColumnwfDs3CurrentCVs | read-only | mandatory | the count of code violation error events in the current interval |
| 1.3.6.1.4.1.18.3.4.13.3 | TablewfDs3Interval | not-accessible | mandatory | The DS3 Interval table |
| 1.3.6.1.4.1.18.3.4.13.3.1 | RowwfDs3IntervalEntry | not-accessible | mandatory | per circuit DS3 interval objects - wfDs3IntervalIndex corresponds to Wellfleet circuit number, wfDs3IntervalNumber is the numbered previous 15-minute interval |
| 1.3.6.1.4.1.18.3.4.13.3.1.1 | ColumnwfDs3IntervalIndex | read-only | mandatory | this corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.3.1.2 | ColumnwfDs3IntervalNumber | read-only | mandatory | 1..96 where 1 is the most recent 15-minute interval and 96 is the least |
| 1.3.6.1.4.1.18.3.4.13.3.1.3 | ColumnwfDs3IntervalESs | read-only | mandatory | the count of errored seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.13.3.1.4 | ColumnwfDs3IntervalSESs | read-only | mandatory | the count of severely errored seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.13.3.1.5 | ColumnwfDs3IntervalSEFs | read-only | mandatory | the count of severely errored framing seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.13.3.1.6 | ColumnwfDs3IntervalUASs | read-only | mandatory | the number of unavailable seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.13.3.1.7 | ColumnwfDs3IntervalBPVs | read-only | mandatory | the count of bipolar violations in the specified interval |
| 1.3.6.1.4.1.18.3.4.13.3.1.8 | ColumnwfDs3IntervalCVs | read-only | mandatory | the count of code violation error events in the specified interval |
| 1.3.6.1.4.1.18.3.4.13.4 | TablewfDs3Total | not-accessible | mandatory | The DS3 Total table |
| 1.3.6.1.4.1.18.3.4.13.4.1 | RowwfDs3TotalEntry | not-accessible | mandatory | per circuit DS3 total objects - wfDs3TotalIndex corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.4.1.1 | ColumnwfDs3TotalIndex | read-only | mandatory | this corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.4.1.2 | ColumnwfDs3TotalESs | read-only | mandatory | total count of errored seconds |
| 1.3.6.1.4.1.18.3.4.13.4.1.3 | ColumnwfDs3TotalSESs | read-only | mandatory | total count of severely errored seconds |
| 1.3.6.1.4.1.18.3.4.13.4.1.4 | ColumnwfDs3TotalSEFs | read-only | mandatory | total count of severely errored framing seconds |
| 1.3.6.1.4.1.18.3.4.13.4.1.5 | ColumnwfDs3TotalUASs | read-only | mandatory | total number of unavailable seconds |
| 1.3.6.1.4.1.18.3.4.13.4.1.6 | ColumnwfDs3TotalBPVs | read-only | mandatory | total count of bipolar violations |
| 1.3.6.1.4.1.18.3.4.13.4.1.7 | ColumnwfDs3TotalCVs | read-only | mandatory | total count of code violation error events |
| 1.3.6.1.4.1.18.3.4.13.5 | TablewfDs3FeConfig | not-accessible | mandatory | The DS3 Far End Configuration table |
| 1.3.6.1.4.1.18.3.4.13.5.1 | RowwfDs3FeConfigEntry | not-accessible | mandatory | per circuit DS3 far end config objects - wfDs3FeIntervalIndex corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.5.1.1 | ColumnwfDs3FeConfigIndex | read-only | mandatory | this corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.5.1.2 | ColumnwfDs3FarEndEquipCode | read-write | mandatory | equipment description code - C-bit parity only |
| 1.3.6.1.4.1.18.3.4.13.5.1.3 | ColumnwfDs3FarEndLocationIDCode | read-write | mandatory | equipment location code - C-bit parity only |
| 1.3.6.1.4.1.18.3.4.13.5.1.4 | ColumnwfDs3FarEndFrameIDCode | read-write | mandatory | code for the equipment location within a building |
| 1.3.6.1.4.1.18.3.4.13.5.1.5 | ColumnwfDs3FarEndUnitCode | read-write | mandatory | code for the equipment location within a bay |
| 1.3.6.1.4.1.18.3.4.13.5.1.6 | ColumnwfDs3FarEndFacilityIDCode | read-write | mandatory | path identification code |
| 1.3.6.1.4.1.18.3.4.13.6 | TablewfDs3FeCurrent | not-accessible | mandatory | The DS3 Far End Current table |
| 1.3.6.1.4.1.18.3.4.13.6.1 | RowwfDs3FeCurrentEntry | not-accessible | mandatory | per circuit DS3 far end current objects wfDs3FeCurrentIndex corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.6.1.1 | ColumnwfDs3FeCurrentIndex | read-only | mandatory | this corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.6.1.2 | ColumnwfDs3FeCurrentESs | read-only | mandatory | the count of errored seconds in the current interval |
| 1.3.6.1.4.1.18.3.4.13.6.1.3 | ColumnwfDs3FeCurrentSESs | read-only | mandatory | the count of severely errored seconds in the current interval |
| 1.3.6.1.4.1.18.3.4.13.6.1.4 | ColumnwfDs3FeCurrentCVs | read-only | mandatory | the count of code violation error events in the current interval |
| 1.3.6.1.4.1.18.3.4.13.7 | TablewfDs3FeInterval | not-accessible | mandatory | The DS3 Far End Interval table |
| 1.3.6.1.4.1.18.3.4.13.7.1 | RowwfDs3FeIntervalEntry | not-accessible | mandatory | per circuit DS3 far end interval objects - wfDs3FeIntervalIndex corresponds to Wellfleet circuit number, wfDs3FeIntervalNumber is the numbered previous 15-minu… |
| 1.3.6.1.4.1.18.3.4.13.7.1.1 | ColumnwfDs3FeIntervalIndex | read-only | mandatory | this corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.7.1.2 | ColumnwfDs3FeIntervalNumber | read-only | mandatory | 1..96 where 1 is the most recent 15-minute interval and 96 is the least |
| 1.3.6.1.4.1.18.3.4.13.7.1.3 | ColumnwfDs3FeIntervalESs | read-only | mandatory | the count of errored seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.13.7.1.4 | ColumnwfDs3FeIntervalSESs | read-only | mandatory | the count of severely errored seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.13.7.1.5 | ColumnwfDs3FeIntervalCVs | read-only | mandatory | the count of code violation error events in the specified interval |
| 1.3.6.1.4.1.18.3.4.13.8 | TablewfDs3FeTotal | not-accessible | mandatory | The DS3 Far End Total table |
| 1.3.6.1.4.1.18.3.4.13.8.1 | RowwfDs3FeTotalEntry | not-accessible | mandatory | per circuit far end DS3 total objects - wfDs3FeTotalIndex corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.8.1.1 | ColumnwfDs3FeTotalIndex | read-only | mandatory | this corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.13.8.1.2 | ColumnwfDs3FeTotalESs | read-only | mandatory | total count of errored seconds |
| 1.3.6.1.4.1.18.3.4.13.8.1.3 | ColumnwfDs3FeTotalSESs | read-only | mandatory | total count of severely errored seconds |
| 1.3.6.1.4.1.18.3.4.13.8.1.4 | ColumnwfDs3FeTotalCVs | read-only | mandatory | total count of code violation error events |