Wellfleet-EGP-MIB
47 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.4.1 | NodewfEgp | |||
| 1.3.6.1.4.1.18.3.5.3.2.4.1.1 | ScalarwfEgpDelete | read-write | mandatory | Create/Delete parameter for determining whether or not EGP is configured on this slot. |
| 1.3.6.1.4.1.18.3.5.3.2.4.1.2 | ScalarwfEgpDisable | read-write | mandatory | Enable/Disable parameter for determining whether or not to startup EGP. |
| 1.3.6.1.4.1.18.3.5.3.2.4.1.3 | ScalarwfEgpInMsgs | read-only | mandatory | The aggregate number of EGP messages received in the box without error. This is part of the EGP group in Mib2. |
| 1.3.6.1.4.1.18.3.5.3.2.4.1.4 | ScalarwfEgpInErrors | read-only | mandatory | The total number of all EGP messages received in the box that had errors. This is part of the EGP group in Mib2. |
| 1.3.6.1.4.1.18.3.5.3.2.4.1.5 | ScalarwfEgpOutMsgs | read-only | mandatory | The total number of EGP locally generated messages from the box. This is part of the EGP group in Mib2. |
| 1.3.6.1.4.1.18.3.5.3.2.4.1.6 | ScalarwfEgpOutErrors | read-only | mandatory | The total number of locally generated EGP messages from the box that had errors. This is part of the EGP group in Mib2. |
| 1.3.6.1.4.1.18.3.5.3.2.4.1.7 | ScalarwfEgpLocalAs | read-write | mandatory | The NIC-assigned decimal number that identifies the local autonomous system. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2 | TablewfEgpNeighTable | not-accessible | mandatory | The EGP Neighbor table contains information regarding this EGP router's EGP neighbors on a particular interface. This table follows the egpNeighTable exactly a… |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1 | RowwfEgpNeighEntry | not-accessible | mandatory | An entry in the EGP Neighbor table |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.1 | ColumnwfEgpNeighState | read-only | mandatory | The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical va… |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.2 | ColumnwfEgpNeighAddr | read-only | mandatory | The IP address of this entry's EGP neighbor. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.3 | ColumnwfEgpNeighAs | read-only | mandatory | The NIC-assigned decimal number that identifies the remote autonomous system (AS) of this EGP peer. Zero should be specified if the AS number of the neighbor i… |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.4 | ColumnwfEgpNeighInMsgs | read-only | mandatory | The number of EGP messages received without error from this EGP peer. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.5 | ColumnwfEgpNeighInErrs | read-only | mandatory | The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum). |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.6 | ColumnwfEgpNeighOutMsgs | read-only | mandatory | The number of locally generated EGP messages to this EGP peer. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.7 | ColumnwfEgpNeighOutErrs | read-only | mandatory | The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.8 | ColumnwfEgpNeighInErrMsgs | read-only | mandatory | The number of EGP-defined error messages received from this EGP peer. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.9 | ColumnwfEgpNeighOutErrMsgs | read-only | mandatory | The number of EGP-defined error messages sent to this EGP peer. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.10 | ColumnwfEgpNeighStateUps | read-only | mandatory | The number of EGP state transitions to the UP state with this EGP peer. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.11 | ColumnwfEgpNeighStateDowns | read-only | mandatory | The number of EGP state transitions from the UP state to any other state with this EGP peer. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.12 | ColumnwfEgpNeighIntervalHello | read-only | mandatory | The interval between EGP Hello command retransmissions (in seconds). This represents the t1 timer as defined in RFC 904. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.13 | ColumnwfEgpNeighIntervalPoll | read-only | mandatory | The interval between EGP poll command retransmissions (in seconds). This represents the t3 timer as defined in RFC 904. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.14 | ColumnwfEgpNeighMode | read-only | mandatory | The polling mode of this EGP entity, either passive or active. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.15 | ColumnwfEgpNeighEvent | read-only | mandatory | The EGP event that occurred on the local interface with respect to this entry's EGP neighbor. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.16 | ColumnwfEgpNeighBadAsns | read-only | mandatory | The number of received EGP messages that contained an unrecognized AS number in the EGP header. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.17 | ColumnwfEgpNeighBadCodes | read-only | mandatory | The number of received EGP messages that contained an unrecognized value in the Code field in the EGP header. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.18 | ColumnwfEgpNeighBadHellos | read-only | mandatory | The number of unexpected Hello neighbor reachability messages received by EGP. A Hello message is unexpected when received from a passive peer. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.19 | ColumnwfEgpNeighBadIHUs | read-only | mandatory | The number of unexpected I Hear You neighbor reachability messages received by EGP. A I Hear You message is unexpected when received in the absence of a prior … |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.20 | ColumnwfEgpNeighBadStatuses | read-only | mandatory | The number of received EGP messages that contained an unrecognized value in the Status field in the EGP header. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.21 | ColumnwfEgpNeighBadChecksums | read-only | mandatory | The number of received EGP messages that contained a faulty checksum in the EGP header. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.22 | ColumnwfEgpNeighBadTypes | read-only | mandatory | The number of received EGP messages that contained an unrecognized value in the Type field in the EGP header. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.23 | ColumnwfEgpNeighBadVersions | read-only | mandatory | The number of received EGP messages that contained an invalid EGP Version number in the EGP header. This EGP implementation supports EGP Version 2. |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.24 | ColumnwfEgpNeighCmdOutOfSeqs | read-only | mandatory | The number of times EGP received an out-of-sequence command message. An out-of-sequence message indicates that a prior message, issued by an EGP peer, has been… |
| 1.3.6.1.4.1.18.3.5.3.2.4.2.1.25 | ColumnwfEgpNeighCmdRejects | read-only | mandatory | The number of times EGP refused to respond to a received command. Such refusal could be generated by receipt of a neighbor acquisition message from an unknown … |
| 1.3.6.1.4.1.18.3.5.3.2.4.3 | TablewfEgpCfgNeighTable | not-accessible | mandatory | This table is used to configure the parameters for a relationship with a particular local EGP neighbor. This table is proprietary and not part of the standard … |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1 | RowwfEgpCfgNeighEntry | not-accessible | mandatory | An entry in the EGP Cfg Neighbor table |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.1 | ColumnwfEgpCfgNeighDelete | read-write | mandatory | Create/Delete parameter. Users perform an SNMP SET operation on this object to create/delete an EGP neighbor relationship with the specified local IP address. |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.2 | ColumnwfEgpCfgNeighDisable | read-write | mandatory | Enable/Disable parameter. Users perforn an SNMP SET operation on this object to enable/disable an EGP Neighbor relationship with the specified local IP address… |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.3 | ColumnwfEgpCfgNeighState | read-only | mandatory | This parameter relfects the current state of the specified EGP neighbor relationship with specfied local IP address. |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.4 | ColumnwfEgpCfgNeighLocalAddr | read-only | mandatory | The IP address of the local interface that provides the EGP connection to the remote autonomous system. |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.5 | ColumnwfEgpCfgNeighRemoteAddr | read-only | mandatory | The IP address of the remote interface that provides the EGP connection to the remote autonomous system. |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.6 | ColumnwfEgpCfgNeighGatewayMode | read-write | mandatory | This parameter specifies the EGP gateway mode of this IP interface. The two modes are core and non-core. When the interface is configured in non-core mode, it … |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.7 | ColumnwfEgpCfgNeighAcqMode | read-write | mandatory | This parameter specifies which of the two neighbors will initiate EGP connections. This configures the mode for the local EGP neighbor. Note: At least one neig… |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.8 | ColumnwfEgpCfgNeighPollMode | read-write | mandatory | This parameter specifies the type of neighbor reachability algorithm this local EGP neighbor will execute. |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.9 | ColumnwfEgpCfgNeighHelloTimer | read-write | mandatory | This parameter specifies the interval between EGP Hello command retransmissions (in seconds) by the local EGP neighbor. This represents the t1 timer as defined… |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.10 | ColumnwfEgpCfgNeighPollTimer | read-write | mandatory | This parameter specifies the interval between EGP poll command retransmissions (in hundredths of a second) by the local EGP neighbor. This represents the t3 ti… |