Wellfleet-FNTS-ATM-MIB
38 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.32.1 | TablewfFntsAtmTable | not-accessible | mandatory | Fnts Atm line record |
| 1.3.6.1.4.1.18.3.4.32.1.1 | RowwfFntsAtmEntry | not-accessible | mandatory | An entry in the FntsAtm table |
| 1.3.6.1.4.1.18.3.4.32.1.1.1 | ColumnwfFntsAtmDelete | read-write | mandatory | create/delete parameter, dflt = created |
| 1.3.6.1.4.1.18.3.4.32.1.1.2 | ColumnwfFntsAtmDisable | read-write | mandatory | enable/disable parameter, dflt = enabled |
| 1.3.6.1.4.1.18.3.4.32.1.1.3 | ColumnwfFntsAtmState | read-only | mandatory | line driver state variable, Not Present, Init, Down, Up |
| 1.3.6.1.4.1.18.3.4.32.1.1.4 | ColumnwfFntsAtmSlot | read-only | mandatory | instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.32.1.1.5 | ColumnwfFntsAtmConnector | read-only | mandatory | instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined… |
| 1.3.6.1.4.1.18.3.4.32.1.1.6 | ColumnwfFntsAtmCct | read-write | mandatory | cct number for this line instance |
| 1.3.6.1.4.1.18.3.4.32.1.1.7 | ColumnwfFntsAtmMtu | read-write | mandatory | mtu parameter, fixed |
| 1.3.6.1.4.1.18.3.4.32.1.1.8 | ColumnwfFntsAtmMadr | read-only | mandatory | line MAC address, fixed - line driver fills in |
| 1.3.6.1.4.1.18.3.4.32.1.1.9 | ColumnwfFntsAtmIpAdr | read-only | mandatory | Ip Address, for the Sonet RPU |
| 1.3.6.1.4.1.18.3.4.32.1.1.10 | ColumnwfFntsAtmAtmState | read-only | mandatory | line driver state variable, Not Present, Init, Down, Up |
| 1.3.6.1.4.1.18.3.4.32.1.1.11 | ColumnwfFntsAtmSpeed | read-only | mandatory | Atm Interface speed in Meg bps. |
| 1.3.6.1.4.1.18.3.4.32.1.1.12 | ColumnwfFntsAtmRxOctets | read-only | mandatory | counts the number of bytes received from the Atm interface. |
| 1.3.6.1.4.1.18.3.4.32.1.1.13 | ColumnwfFntsAtmRxFrames | read-only | mandatory | counts the number of frames received from the Atm interface. |
| 1.3.6.1.4.1.18.3.4.32.1.1.14 | ColumnwfFntsAtmTxOctets | read-only | mandatory | counts the number of bytes sent to the Atm interface. |
| 1.3.6.1.4.1.18.3.4.32.1.1.15 | ColumnwfFntsAtmTxFrames | read-only | mandatory | counts the number of frames sent to the Atm interface. |
| 1.3.6.1.4.1.18.3.4.32.1.1.16 | ColumnwfFntsAtmLackRescErrorRx | read-only | mandatory | counts the number of requested buffers not available to the driver. |
| 1.3.6.1.4.1.18.3.4.32.1.1.17 | ColumnwfFntsAtmInErrors | read-only | mandatory | counts the number of errors on the receive side of the driver. |
| 1.3.6.1.4.1.18.3.4.32.1.1.18 | ColumnwfFntsAtmOutErrors | read-only | mandatory | counts the number of errors on the transmit side of the driver. |
| 1.3.6.1.4.1.18.3.4.32.1.1.19 | ColumnwfFntsAtmRxLongFrames | read-only | mandatory | counts the number of received frames too long. |
| 1.3.6.1.4.1.18.3.4.32.1.1.20 | ColumnwfFntsAtmTxClipFrames | read-only | mandatory | counts the number of transmit frames dropped because of no transmit queue space. |
| 1.3.6.1.4.1.18.3.4.32.1.1.21 | ColumnwfFntsAtmRxReplenMisses | read-only | mandatory | counts the number of the buffer requests without response. |
| 1.3.6.1.4.1.18.3.4.32.1.1.22 | ColumnwfFntsAtmRxOverruns | read-only | mandatory | counts the number of receiver overruns. |
| 1.3.6.1.4.1.18.3.4.32.1.1.23 | ColumnwfFntsAtmRxRingErrors | read-only | mandatory | counts the number of receiver ring errors. |
| 1.3.6.1.4.1.18.3.4.32.1.1.24 | ColumnwfFntsAtmTxRingErrors | read-only | mandatory | counts the number of transmit ring errors. |
| 1.3.6.1.4.1.18.3.4.32.1.1.25 | ColumnwfFntsAtmOpErrors | read-only | mandatory | counts the number of operational driver errors. |
| 1.3.6.1.4.1.18.3.4.32.1.1.26 | ColumnwfFntsAtmRxProcessings | read-only | mandatory | counts the number of times the receive processing has been called. |
| 1.3.6.1.4.1.18.3.4.32.1.1.27 | ColumnwfFntsAtmTxProcessings | read-only | mandatory | counts the number of times the transmit processing has been called. |
| 1.3.6.1.4.1.18.3.4.32.1.1.28 | ColumnwfFntsAtmTxCmplProcessings | read-only | mandatory | counts the number of times the transmit complete processing has been called. |
| 1.3.6.1.4.1.18.3.4.32.1.1.29 | ColumnwfFntsAtmIntrProcessings | read-only | mandatory | counts the number of times the interrupt service routine has been called |
| 1.3.6.1.4.1.18.3.4.32.1.1.30 | ColumnwfFntsAtmSintProcessings | read-only | mandatory | counts the number of times the change state interrupt has been called. |
| 1.3.6.1.4.1.18.3.4.32.1.1.31 | ColumnwfFntsAtmPintProcessings | read-only | mandatory | counts the number of times the primitive interrupt service routine has been called. |
| 1.3.6.1.4.1.18.3.4.32.1.1.32 | ColumnwfFntsAtmRxRingLength | read-write | mandatory | Atm Interface Receiver Ring Length. |
| 1.3.6.1.4.1.18.3.4.32.1.1.33 | ColumnwfFntsAtmTxRingLength | read-write | mandatory | Atm Interface Transmit Ring Length. |
| 1.3.6.1.4.1.18.3.4.32.1.1.34 | ColumnwfFntsAtmCfgRxQueueLength | read-write | mandatory | Atm Configurable receive queue length. |
| 1.3.6.1.4.1.18.3.4.32.1.1.35 | ColumnwfFntsAtmCfgTxQueueLength | read-write | mandatory | Atm Configurable transmit queue length. |
| 1.3.6.1.4.1.18.3.4.32.1.1.36 | ColumnwfFntsAtmLineNumber | read-write | mandatory | Unique number identifying this interface. |