Wellfleet-IP-MIB
606 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.1.1 | NodewfIpBase | |||
| 1.3.6.1.4.1.18.3.5.3.2.1.1.1 | ScalarwfIpBaseCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IP. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.2 | ScalarwfIpBaseEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable IP. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.3 | ScalarwfIpBaseState | read-only | mandatory | The current state of the entire IP. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.4 | ScalarwfIpBaseForwarding | read-write | mandatory | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g… |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.5 | ScalarwfIpBaseDefaultTTL | read-write | mandatory | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the tra… |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.6 | ScalarwfIpBaseRipDiameter | read-write | mandatory | The Diameter of the RIP network. 1 less than 'infinity |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.7 | ScalarwfIpBaseRouteCache | read-write | mandatory | The interval at which routing entries are flushed from the forwarding tables. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.8 | ScalarwfIpBaseMibTables | read-write | mandatory | Configures which routing MIB tables are maintained by IP. Previously, only the wfIpBaseRtTable was maintained. In order to support variable length subnets, the… |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.9 | ScalarwfIpBaseNetworks | read-only | mandatory | The number of networks (including subnets) in the routing table |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.10 | ScalarwfIpBaseZeroSubnetEnable | read-write | mandatory | This parameter indicates whether or not 0 subnets are allowed. If they are not allowed, interfaces configured with a 0 subnet will not be allowed. Value 'rip1o… |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.11 | ScalarwfIpBaseEstimatedNetworks | read-write | mandatory | This parameter indicates the estimated number of networks that the router will need to keep in its routing table. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.12 | ScalarwfIpBaseHosts | read-only | mandatory | This parameter indicates the number of hosts resolved by IP. This parameter will be equal to the number of instances of wfIpNetToMediaEntry |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.13 | ScalarwfIpBaseEstimatedHosts | read-write | mandatory | This parameter indicates the estimated number of hosts that the router will need to keep in its hosts table. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.14 | ScalarwfIpBaseDefaultOverSubnetEnable | read-write | mandatory | This parameter indicates whether or not default route for subnets in subnetted network is allowed. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.15 | ScalarwfIpBaseMaxPolicyRules | read-write | mandatory | This parameter indicates the maximum number of policy rules that can be configured per type (ACCEPT or ANNOUNCE) per protocol. In order to configure more polic… |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.16 | ScalarwfIpBaseRouteFilterSupport | read-write | mandatory | This parameter indicates whether or not route filters are supported. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.17 | ScalarwfRipMaximumPath | read-write | mandatory | Maximum number of equal cost paths allowed for a network installed by RIP. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.18 | ScalarwfIpMultipathMethod | read-write | mandatory | Method to use to choose next hop when more than one is available. The round-robin method will send each packet destined for a given destination to a different … |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.19 | ScalarwfIpBaseIspMode | read-write | mandatory | This parameter indicates whether or not ISP features are supported: i.e. BGP soloist, etc. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.20 | ScalarwfIpBaseExtendedTrafficFilterSupport | read-write | mandatory | This parameter indicates whether or not extended traffic filters are supported. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.21 | ScalarwfIpOspfMaximumPath | read-write | mandatory | Maximum number of equal cost paths allowed for a network installed by OSPF. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.22 | ScalarwfIpBaseIcmpErrorLimit | read-write | mandatory | The maximum number of ICMP messages that is allowed to be transmitted within 1 second interval out of any individual interface. Disabled if set to 0. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.23 | ScalarwfIpBaseIbgpEcmp | read-write | obsolete | IBGP ECMP mode allows BGP to select route to IBGP next hop using available ECMP inter-domain routing information. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.24 | ScalarwfIpBaseRtbBalanceInterval | read-write | mandatory | Time interval (in minutes) to re-balance route pool. If this value is 0, then 'periodical re-balance' functionality is considered to be disabled. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.25 | ScalarwfIpBaseRtblP1 | read-write | mandatory | Controls the number of indexes in IP routing RTBL. If this value is 0, a value based on the number of hosts and the number of nets will be calculated. This par… |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.26 | ScalarwfIpBaseRtblP2 | read-write | mandatory | Controls the deviation of nodes per index from the average number of nodes per index. If this value is 0, a value based on the number of hosts and the number o… |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.27 | ScalarwfIpBaseArpBufLimitPrcnt | read-write | mandatory | Defines the upper limit (in percent) of buffers that can be used by ARP for saving buffers when resolving ARP request |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.28 | ScalarwfIpBaseDirectedBcastEnable | read-write | mandatory | Boxwide directed broadcast Enable/Disable parameter. Default is enabled. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.29 | ScalarwfIpBaseHostOnlyRip | read-write | mandatory | Whether or not listen RIPs in Host Only Mode. |
| 1.3.6.1.4.1.18.3.5.3.2.1.1.30 | ScalarwfIpBaseBlockSRR | read-write | mandatory | Blocks incoming IP packets that have the Loose or Strict Source Record Route ip option enabled. Default is disabled which will allow these packets through. |
| 1.3.6.1.4.1.18.3.5.3.2.1.2 | TablewfIpBaseRtEntryTable | not-accessible | mandatory | The list of elements in IP's routing table |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1 | RowwfIpBaseRtEntry | not-accessible | mandatory | A description of a route |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.1 | ColumnwfIpBaseRouteDest | read-only | mandatory | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.2 | ColumnwfIpBaseRouteIfIndex | read-only | mandatory | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.3 | ColumnwfIpBaseRouteMetric1 | read-only | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.4 | ColumnwfIpBaseRouteMetric2 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.5 | ColumnwfIpBaseRouteMetric3 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.6 | ColumnwfIpBaseRouteMetric4 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.7 | ColumnwfIpBaseRouteNextHop | read-only | mandatory | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.8 | ColumnwfIpBaseRouteType | read-only | mandatory | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.9 | ColumnwfIpBaseRouteProto | read-only | mandatory | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.10 | ColumnwfIpBaseRouteAge | read-only | mandatory | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.11 | ColumnwfIpBaseRouteMask | read-only | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.12 | ColumnwfIpBaseRouteMetric5 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.4.1.18.3.5.3.2.1.2.1.13 | ColumnwfIpBaseRouteInfo | read-only | mandatory | A user-defined string which describes this Route entry |
| 1.3.6.1.4.1.18.3.5.3.2.1.3 | TablewfIpBaseHostEntryTable | not-accessible | obsolete | The list of elements in IP's host table |
| 1.3.6.1.4.1.18.3.5.3.2.1.3.1 | RowwfIpBaseHostEntry | not-accessible | obsolete | A description of a resolved host |
| 1.3.6.1.4.1.18.3.5.3.2.1.3.1.1 | ColumnwfIpBaseNetToMediaIfIndex | read-only | obsolete | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.18.3.5.3.2.1.3.1.2 | ColumnwfIpBaseNetToMediaPhysAddress | read-only | obsolete | The media-dependent `physical' address. |
| 1.3.6.1.4.1.18.3.5.3.2.1.3.1.3 | ColumnwfIpBaseNetToMediaNetAddress | read-only | obsolete | The IpAddress corresponding to the media-dependent `physical' address. |
| 1.3.6.1.4.1.18.3.5.3.2.1.3.1.4 | ColumnwfIpBaseNetToMediaType | read-write | obsolete | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4 | TablewfIpInterfaceTable | not-accessible | obsolete | The list of configured IP interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1 | RowwfIpInterfaceEntry | not-accessible | obsolete | An IP interface description |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.1 | ColumnwfIpInterfaceCreate | read-write | obsolete | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IP interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.2 | ColumnwfIpInterfaceEnable | read-write | obsolete | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IP interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.3 | ColumnwfIpInterfaceState | read-only | obsolete | INvalid indicates an error in processing the cfg record |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.4 | ColumnwfIpInterfaceAddr | read-only | obsolete | The IP Address to which this entry's addressing information pertains |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.5 | ColumnwfIpInterfaceCircuit | read-only | obsolete | The Circuit Number that this interface runs over |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.6 | ColumnwfIpInterfaceMask | read-write | obsolete | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.7 | ColumnwfIpInterfaceCost | read-write | obsolete | The Cost metric associated with the IP Address of this entry |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.8 | ColumnwfIpInterfaceCfgBcastAddr | read-write | obsolete | The user can specifcy a broadcast address for a NWIF |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.9 | ColumnwfIpInterfaceBcastAddr | read-only | obsolete | The value of the broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. This value applies to bo… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.10 | ColumnwfIpInterfaceMTUDiscovery | read-write | obsolete | Whether MTU discovery option is on/off |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.11 | ColumnwfIpInterfaceAMR | read-write | obsolete | Whether Address Mask Reply is ON/OFF |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.12 | ColumnwfIpInterfaceASB | read-write | obsolete | Whether All-Subnet Broadcasts Are excepted and Sent out this NWIF |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.13 | ColumnwfIpInterfaceAddressResolutionType | read-write | obsolete | Indicates which Address Resolution Type to use |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.14 | ColumnwfIpInterfaceProxy | read-write | obsolete | Indicates Whether Proxy is on this Interface or not |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.15 | ColumnwfIpInterfaceHostCache | read-write | obsolete | Whether the Host Cache (Address Aging) is on or not. A Range of discrete values is specified as well as a value meaning don't age |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.16 | ColumnwfIpInterfaceUdpXsumOn | read-write | obsolete | Whether to turn UDP checksum verification on for UDP packets recieved and transmitted by this router |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.17 | ColumnwfIpInterfaceCfgMacAddress | read-write | obsolete | The desired mac set by the user |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.18 | ColumnwfIpInterfaceMacAddress | read-only | obsolete | The MAC Address for this Interface- actual one used |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.19 | ColumnwfIpInterfaceReasmMaxSize | read-only | obsolete | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.20 | ColumnwfIpInterfaceMaxInfo | read-only | obsolete | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.21 | ColumnwfIpInterfaceInReceives | read-only | obsolete | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.22 | ColumnwfIpInterfaceInHdrErrors | read-only | obsolete | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live … |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.23 | ColumnwfIpInterfaceInAddrErrors | read-only | obsolete | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.24 | ColumnwfIpInterfaceForwDatagrams | read-only | obsolete | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.25 | ColumnwfIpInterfaceInUnknownProtos | read-only | obsolete | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.26 | ColumnwfIpInterfaceInDiscards | read-only | obsolete | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.27 | ColumnwfIpInterfaceInDelivers | read-only | obsolete | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.28 | ColumnwfIpInterfaceOutRequests | read-only | obsolete | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.29 | ColumnwfIpInterfaceOutDiscards | read-only | obsolete | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for … |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.30 | ColumnwfIpInterfaceOutNoRoutes | read-only | obsolete | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.31 | ColumnwfIpInterfaceReasmTimeout | read-only | obsolete | The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.32 | ColumnwfIpInterfaceReasmReqds | read-only | obsolete | The number of IP fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.33 | ColumnwfIpInterfaceReasmOKs | read-only | obsolete | The number of IP datagrams successfully reassembled. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.34 | ColumnwfIpInterfaceReasmFails | read-only | obsolete | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.35 | ColumnwfIpInterfaceFragOKs | read-only | obsolete | The number of IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.36 | ColumnwfIpInterfaceFragFails | read-only | obsolete | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.37 | ColumnwfIpInterfaceFragCreates | read-only | obsolete | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.38 | ColumnwfIpInterfaceIcmpInMsgs | read-only | obsolete | The total number of ICMP messages which includes all those counted by wfIpInterfaceIcmpInErrors. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.39 | ColumnwfIpInterfaceIcmpInErrors | read-only | obsolete | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.40 | ColumnwfIpInterfaceIcmpInDestUnreachs | read-only | obsolete | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.41 | ColumnwfIpInterfaceIcmpInTimeExcds | read-only | obsolete | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.42 | ColumnwfIpInterfaceIcmpInParmProbs | read-only | obsolete | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.43 | ColumnwfIpInterfaceIcmpInSrcQuenchs | read-only | obsolete | The number of ICMP Source Quench messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.44 | ColumnwfIpInterfaceIcmpInRedirects | read-only | obsolete | The number of ICMP Redirect messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.45 | ColumnwfIpInterfaceIcmpInEchos | read-only | obsolete | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.46 | ColumnwfIpInterfaceIcmpInEchoReps | read-only | obsolete | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.47 | ColumnwfIpInterfaceIcmpInTimestamps | read-only | obsolete | The number of ICMP Timestamp (request) messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.48 | ColumnwfIpInterfaceIcmpInTimestampReps | read-only | obsolete | The number of ICMP Timestamp Reply messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.49 | ColumnwfIpInterfaceIcmpInAddrMasks | read-only | obsolete | The number of ICMP Address Mask Request messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.50 | ColumnwfIpInterfaceIcmpInAddrMaskReps | read-only | obsolete | The number of ICMP Address Mask Reply messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.51 | ColumnwfIpInterfaceIcmpOutMsgs | read-only | obsolete | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.52 | ColumnwfIpInterfaceIcmpOutErrors | read-only | obsolete | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.53 | ColumnwfIpInterfaceIcmpOutDestUnreachs | read-only | obsolete | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.54 | ColumnwfIpInterfaceIcmpOutTimeExcds | read-only | obsolete | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.55 | ColumnwfIpInterfaceIcmpOutParmProbs | read-only | obsolete | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.56 | ColumnwfIpInterfaceIcmpOutSrcQuenchs | read-only | obsolete | The number of ICMP Source Quench messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.57 | ColumnwfIpInterfaceIcmpOutRedirects | read-only | obsolete | The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.58 | ColumnwfIpInterfaceIcmpOutEchos | read-only | obsolete | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.59 | ColumnwfIpInterfaceIcmpOutEchoReps | read-only | obsolete | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.60 | ColumnwfIpInterfaceIcmpOutTimestamps | read-only | obsolete | The number of ICMP Timestamp (request) messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.61 | ColumnwfIpInterfaceIcmpOutTimestampReps | read-only | obsolete | The number of ICMP Timestamp Reply messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.62 | ColumnwfIpInterfaceIcmpOutAddrMasks | read-only | obsolete | The number of ICMP Address Mask Request messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.63 | ColumnwfIpInterfaceIcmpOutAddrMaskReps | read-only | obsolete | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.64 | ColumnwfIpInterfaceTrEndStation | read-write | obsolete | Use Source Routing over token ring selection. Only applies if pam type is TRING. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.65 | ColumnwfIpInterfaceSMDSGroupAddress | read-write | obsolete | The SMDS group address |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.66 | ColumnwfIpInterfaceSMDSArpReqAddress | read-write | obsolete | The SMDS arp req address |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.67 | ColumnwfIpInterfaceFRBcastDlci | read-write | obsolete | Frame Relay broadcast dlci |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.68 | ColumnwfIpInterfaceFRMcast1Dlci | read-write | obsolete | Frame Relay multicast dlci #1 |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.69 | ColumnwfIpInterfaceFRMcast2Dlci | read-write | obsolete | Frame Relay multicast dlci #2 |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.70 | ColumnwfIpInterfaceRedirect | read-write | obsolete | Indicates Whether we're sending out redirects on this Interface or not |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.71 | ColumnwfIpInterfaceEnetArpEncaps | read-write | obsolete | The data link encapsulation type to use for ARP packets if the the media is ethernet. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.72 | ColumnwfIpInterfaceCacheMisses | read-only | obsolete | The number of FFT cache misses (i.e how many times did the cache gate have to do a look up in the RNP because the FFT didn't have the destination network |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.73 | ColumnwfIpInterfaceCacheNetworks | read-only | obsolete | Between 0 and wfIpInterfaceFwdCacheSize |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.74 | ColumnwfIpInterfaceCacheRemoves | read-only | obsolete | The number of networks which have been flushed from the FFT because of aging |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.75 | ColumnwfIpInterfaceSlotMask | read-write | obsolete | Slot mask for which slots a circuit-less interface is eligible to run on. The most significant bit represents slot 1, the next most significant bit represents … |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.76 | ColumnwfIpInterfaceEnableSecurity | read-write | obsolete | Enables RIPSO on this interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.77 | ColumnwfIpInterfaceStripSecurity | read-write | obsolete | Defines which packets will have security option removed. This is a bit mask. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.78 | ColumnwfIpInterfaceRequireOutSecurity | read-write | obsolete | Defines which types of outbound packets are required to have a security option. This is a bit mask. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.79 | ColumnwfIpInterfaceRequireInSecurity | read-write | obsolete | Defines whether or not incoming packets must have security option. This is a bit mask. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.80 | ColumnwfIpInterfaceMinLevel | read-write | obsolete | Defines the minimum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL … |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.81 | ColumnwfIpInterfaceMaxLevel | read-write | obsolete | Defines the maximum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL … |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.82 | ColumnwfIpInterfaceMustOutAuthority | read-write | obsolete | Defines the authority bits that must be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the … |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.83 | ColumnwfIpInterfaceMayOutAuthority | read-write | obsolete | Defines the authority bits that may be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the f… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.84 | ColumnwfIpInterfaceMustInAuthority | read-write | obsolete | Defines the authority bits that must be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the fir… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.85 | ColumnwfIpInterfaceMayInAuthority | read-write | obsolete | Defines the authority bits that may be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the firs… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.86 | ColumnwfIpInterfaceImplicitLabelEnabled | read-write | obsolete | Should an implicit label be associated with any inbound unlabelled datagrams? |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.87 | ColumnwfIpInterfaceImplicitAuth | read-write | obsolete | Defines the authority bits in the implicit label associated with an unlabelled inbound datagram. This is a bit map. 'NONE' means that a 3-byte option label (no… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.88 | ColumnwfIpInterfaceImplicitLevel | read-write | obsolete | Defines the classification level byte in the implicit label associated with an unlabelled inbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_L… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.89 | ColumnwfIpInterfaceDefaultLabelEnabled | read-write | obsolete | Should a default label be associated with any not-yet-labelled oubound datagrams? |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.90 | ColumnwfIpInterfaceDefaultAuth | read-write | obsolete | Defines the authority bits in the default label associated with a not-yet-labelled outbound datagram. This is a bit map. 'NONE' means that a 3-byte option labe… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.91 | ColumnwfIpInterfaceDefaultLevel | read-write | obsolete | Defines the classification level byte to use in the default label associated with a not-yet-labelled outbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.92 | ColumnwfIpInterfaceErrorLabelEnabled | read-write | obsolete | Should an error label be associated with any outbound ICMP error packets? |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.93 | ColumnwfIpInterfaceErrorAuth | read-write | obsolete | Defines the authority bits in the error label associated with any outbount ICMP error packets. This is a bit map. 'NONE' means that a 3-byte option label (no a… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.94 | ColumnwfIpInterfaceDropRxAuths | read-only | obsolete | Number of received packets dropped because the authority flag(s) were not sufficient. This could mean that the 'must' flags were not all there, or that the fla… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.95 | ColumnwfIpInterfaceDropRxFormats | read-only | obsolete | Number of received packets dropped because the security option format was invalid. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.96 | ColumnwfIpInterfaceDropRxLevels | read-only | obsolete | Number of received packets dropped because the classification level was out of range. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.97 | ColumnwfIpInterfaceDropRxNoIpsos | read-only | obsolete | Number of received packets dropped because no IP security label was present. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.98 | ColumnwfIpInterfaceDropTxAuths | read-only | obsolete | Number of transmitted packets dropped because the authority flag(s) were not sufficient. This could mean that the 'must' flags were not all there, or that the … |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.99 | ColumnwfIpInterfaceDropTxLevels | read-only | obsolete | Number of transmitted packets dropped because the classification level was out of range. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.100 | ColumnwfIpInterfaceDropTxNoIpsos | read-only | obsolete | Number of packets not transmitted because no IP security label was present. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.101 | ColumnwfIpInterfaceDropTxNoIpsoRooms | read-only | obsolete | Number of packets not transmitted because there was not enough space left in the IP header to insert an IP security option. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.102 | ColumnwfIpInterfaceICMPInAdminProhib | read-only | obsolete | Number of ICMP dest unreachable/communication administratively prohibited messages received. Note: may be sent by BFE or another system |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.103 | ColumnwfIpInterfaceICMPOutAdminProhib | read-only | obsolete | Number of ICMP dest unreachable/communication administratively prohibited messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.104 | ColumnwfIpInterfaceFwdCacheSize | read-write | obsolete | Maximum number of entries allowed in the Forwarding Table at one time. There is a forwarding table per interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.105 | ColumnwfIpInterfaceTunnelInfo | read-write | obsolete | If non-null and if wfIpInterfaceCircuit is zero, this string contains encoded information for setting up this interface as a tunnel endpoint. Currently, no und… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.106 | ColumnwfIpInterfaceIcmpInRdiscSolicit | read-only | obsolete | The number of ICMP Router Discovery Solicit messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.107 | ColumnwfIpInterfaceIcmpInRdiscAdvert | read-only | obsolete | The number of ICMP Router Discovery Advertisement messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.108 | ColumnwfIpInterfaceIcmpOutRdiscAdvert | read-only | obsolete | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.109 | ColumnwfIpInterfaceRoutingDiscards | read-only | obsolete | The number of routing entries which were chosen to be discarded even though they are valid |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.110 | ColumnwfIpInterfaceUnnumAssocAddr | read-write | obsolete | The Associated IP address used by unnumbered interfaces when sourcing a packet. Rip also uses this attribute to make decisions about advertising subnets over u… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.111 | ColumnwfIpInterfaceUnnumAssocAlt | read-write | obsolete | Enable/Disable parameter. Default is disabled. Users perform a set operation on this object in order to enable/disable the option to automatically assign an al… |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.112 | ColumnwfIpInterfaceAtmArpMode | read-write | obsolete | Indicates whether ATMARP is a client or running as a server. A value of 'none' is for ATM WAN SVCs feature |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.113 | ColumnwfIpInterfaceAtmArpServerAddress | read-write | obsolete | The ATMARP server address |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.114 | ColumnwfIpInterfaceAtmArpServerVcAgingEnable | read-write | obsolete | Indicates whether the ATMARP server VC should be aged (for client operation) |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.115 | ColumnwfIpInterfaceAtmArpServerRegInterval | read-write | obsolete | For client operation, the interval between registration refreshes. For a server. this will be the duration a registration is valid. (in seconds) |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.116 | ColumnwfIpInterfaceAtmArpServerConnState | read-only | obsolete | |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.117 | ColumnwfIpInterfaceAtmArpAttemptedCalls | read-only | obsolete | Indicates the number of calls ATMARP has attempted |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.118 | ColumnwfIpInterfaceAtmArpFailRetryCalls | read-only | obsolete | Indicates the number of attempted calls that have failed, but were retried |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.119 | ColumnwfIpInterfaceAtmArpFailNoRetryCalls | read-only | obsolete | Indicates the number of attempted calls that have failed, and were not retried |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.120 | ColumnwfIpInterfaceAtmArpSuccessfulCalls | read-only | obsolete | Indicates the number of originated calls completed successfully |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.121 | ColumnwfIpInterfaceAtmArpAcceptedCalls | read-only | obsolete | Indicates the number of received calls that were accepted |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.122 | ColumnwfIpInterfaceAtmArpOpenSvcs | read-only | obsolete | Indicates the number of currently open calls |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.123 | ColumnwfIpInterfaceAtmArpMisc | read-write | obsolete | Not in use. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.124 | ColumnwfIpInterfaceAtmArpMisc2 | read-write | obsolete | Not in use. |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.125 | ColumnwfIpInterfaceMcastInPkts | read-only | obsolete | The number of multicast packets received by the interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.126 | ColumnwfIpInterfaceMcastOutPkts | read-only | obsolete | the number of multicast packets transmitted by the interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.4.1.127 | ColumnwfIpInterfaceTrEsArpType | read-write | obsolete | Token Ring End Station ARP type ARE / STE |
| 1.3.6.1.4.1.18.3.5.3.2.1.5 | TablewfIpStaticRouteTable | not-accessible | mandatory | The list of static routes |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1 | RowwfIpStaticRouteEntry | not-accessible | mandatory | A static route definition |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.1 | ColumnwfIpSrCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete the IP Static Route. |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.2 | ColumnwfIpSrEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable this IP Static Route. |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.3 | ColumnwfIpSrIpAddress | read-only | mandatory | The Address of this static route |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.4 | ColumnwfIpSrIpNetMask | read-only | mandatory | The IP Network Mask for this Static Route |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.5 | ColumnwfIpSrCost | read-write | mandatory | The Cost of this Static Route |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.6 | ColumnwfIpSrNextHopAddr | read-write | mandatory | The Next Hop IP Address |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.7 | ColumnwfIpSrNextHopMask | read-write | obsolete | The Next Hop IP Netmask |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.8 | ColumnwfIpSrPreference | read-write | mandatory | This Routes Preference |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.9 | ColumnwfIpSrIpAddressRt | read-only | mandatory | The Route Identifier Which numbered route this is to be |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.10 | ColumnwfIpSrValid | read-only | mandatory | Whether this Static Route is valid or not |
| 1.3.6.1.4.1.18.3.5.3.2.1.5.1.11 | ColumnwfIpSrUnnumCct | read-write | mandatory | static route over the Unnumbered interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.6 | TablewfIpAdjacentHostTable | not-accessible | mandatory | The list of Adjacent Hosts (static IP-Mac resolutions) |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1 | RowwfIpAdjacentHostEntry | not-accessible | mandatory | A description of an adjacent host |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.1 | ColumnwfIpAdjHostCreate | read-write | mandatory | Whether to Delete this Adjacent Host |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.2 | ColumnwfIpAdjHostEnable | read-write | mandatory | Whether to Disable this Host |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.3 | ColumnwfIpAdjHostIpAddress | read-only | mandatory | The IP address of this Adjacent Host |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.4 | ColumnwfIpAdjHostIntf | read-write | mandatory | The Interface for this Adjacent Host |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.5 | ColumnwfIpAdjHostIntfMask | read-write | mandatory | The Network Mask of this Intf |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.6 | ColumnwfIpAdjHostMacAddr | read-write | mandatory | The LAN Address for this HOST |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.7 | ColumnwfIpAdjHostEncaps | read-write | mandatory | The encapsulation type of this entry |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.8 | ColumnwfIpAdjHostValid | read-only | mandatory | Whether the record passed validation or not |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.9 | ColumnwfIpAdjHostX121Addr | read-write | mandatory | WAN address (X.121, E.164, etc.) used to establish an SVC to the adjacent host. |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.10 | ColumnwfIpAdjHostSubaddr | read-write | mandatory | The subaddress used to establish an SVC to the adjacent host. |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.11 | ColumnwfIpAdjHostTypeOfNumber | read-write | mandatory | The type of number used to establish an SVC to the adjacent host. |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.12 | ColumnwfIpAdjHostType | read-write | mandatory | The type of adjacent host. |
| 1.3.6.1.4.1.18.3.5.3.2.1.6.1.13 | ColumnwfIpAdjHostGreConnName | read-write | mandatory | The name of the remote GRE connection to which an adjacent host is configured. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7 | TablewfIpTrafficFilterTable | not-accessible | mandatory | IP Traffic Filters |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1 | RowwfIpTrafficFilterEntry | not-accessible | mandatory | A traffic filter definition |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.1 | ColumnwfIpTrafficFilterCreate | read-write | mandatory | Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.2 | ColumnwfIpTrafficFilterEnable | read-write | mandatory | Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.3 | ColumnwfIpTrafficFilterStatus | read-only | mandatory | Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error… |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.4 | ColumnwfIpTrafficFilterCounter | read-only | mandatory | The number of received packets that have matched this rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.5 | ColumnwfIpTrafficFilterDefinition | read-write | mandatory | The filter rule definition. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.6 | ColumnwfIpTrafficFilterReserved | read-only | mandatory | Reserved field. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.7 | ColumnwfIpTrafficFilterInterface | read-only | mandatory | The network address of the IP interface to which this filter is applied. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.8 | ColumnwfIpTrafficFilterCircuit | read-only | mandatory | The ID of the Circuit to which the filter is applied. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.9 | ColumnwfIpTrafficFilterRuleNumber | read-only | mandatory | ID for the rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.10 | ColumnwfIpTrafficFilterFragment | read-only | mandatory | Fragment number - for large rules. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.11 | ColumnwfIpTrafficFilterName | read-write | mandatory | name of the rule number |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.12 | ColumnwfIpTrafficFilterPrecedence | read-write | mandatory | Precedence of the filter. If 2 or more rules match the one with higher precedence will be applied. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.13 | ColumnwfIpTrafficFilterType | read-only | mandatory | Type of this filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.14 | ColumnwfIpTrafficFilterDSOopCounter | read-only | mandatory | DiffServ Police out-of-profile packet counter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.15 | ColumnwfIpTrafficFilterDSPrecedence | read-write | mandatory | Precedence of the filter. If 2 or more rules match the one with higher precedence will be applied. The lower the value of this field the higher the precedebnce. |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.16 | ColumnwfIpTrafficFilterDSBytes | read-only | mandatory | Total number of bytes this DS filter was applied to. This is the sum of lengths of all the packets that matched this filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.7.1.17 | ColumnwfIpTrafficFilterDSOopBytes | read-only | mandatory | Number of bytes counted as out-of profile. |
| 1.3.6.1.4.1.18.3.5.3.2.1.16 | TablewfIpForwardTable | not-accessible | mandatory | IP Forwarding table The IP Forwarding Table obsoletes and replaces the wfIpBaseRt Table It adds knowledge of the autonomous system of the next hop, multiple ne… |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1 | RowwfIpForwardEntry | not-accessible | mandatory | A forwarding entry |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.1 | ColumnwfIpForwardDest | read-only | mandatory | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. This object may not take a Multicast (Class D) addres… |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.2 | ColumnwfIpForwardMask | read-only | mandatory | Indicates the mask to be logical-ANDed with the destination address before being compared to the value in the wfIpForwardDest field. For those systems that do … |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.3 | ColumnwfIpForwardPolicy | read-only | mandatory | The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unle… |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.4 | ColumnwfIpForwardNextHop | read-only | mandatory | On remote routes, the address of the next system en route; Otherwise, 0.0.0.0 |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.5 | ColumnwfIpForwardIfIndex | read-only | mandatory | The ifIndex value which uniquely identifies the local interface through which the next hop of this route should be reached. |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.6 | ColumnwfIpForwardType | read-only | mandatory | The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.7 | ColumnwfIpForwardProto | read-only | mandatory | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.8 | ColumnwfIpForwardAge | read-only | mandatory | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.9 | ColumnwfIpForwardInfo | read-only | mandatory | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.10 | ColumnwfIpForwardNextHopAS | read-only | mandatory | The Autonomous System Number of the Next Hop. When this is unknown or not relevant to the protocol indicated by ipForwardProto, zero. |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.11 | ColumnwfIpForwardMetric1 | read-only | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's wfIpRouteProto value. I… |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.12 | ColumnwfIpForwardMetric2 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's wfIpRouteProto value. … |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.13 | ColumnwfIpForwardMetric3 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's wfIpRouteProto value. … |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.14 | ColumnwfIpForwardMetric4 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's wfIpRouteProto value. … |
| 1.3.6.1.4.1.18.3.5.3.2.1.16.1.15 | ColumnwfIpForwardMetric5 | read-only | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's wfIpRouteProto value. … |
| 1.3.6.1.4.1.18.3.5.3.2.1.17 | TablewfRdiscIntfTable | not-accessible | mandatory | The list of configured RDISC interfaces |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1 | RowwfRdiscIntfEntry | not-accessible | mandatory | A description of a RDISC interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.1 | ColumnwfRdiscInterfaceCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an RDISC Interface instance. |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.2 | ColumnwfRdiscInterfaceEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a RDISC interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.3 | ColumnwfRdiscInterfaceState | read-only | mandatory | The current state of RDISC on this interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.4 | ColumnwfRdiscInterfaceIndex | read-only | mandatory | The IP interface to run RDISC on. |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.5 | ColumnwfRdiscInterfaceBcast | read-write | mandatory | Type of broadcast addr to use in sending advertisements |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.6 | ColumnwfRdiscInterfaceMinIntrvl | read-write | mandatory | Min time Interval between RDisc Advertisements (seconds) |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.7 | ColumnwfRdiscInterfaceMaxIntrvl | read-write | mandatory | Max time Interval between RDisc Advertisements (seconds) |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.8 | ColumnwfRdiscInterfaceLifetime | read-write | mandatory | Max time Interval between RDisc Advertisements (seconds) |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.9 | ColumnwfRdiscInterfacePref | read-write | mandatory | Interface preference level (Higher is more prefered |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.10 | ColumnwfRdiscInterfaceUnicastAdvt | read-only | mandatory | Couter for number of unicast advertisements |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.11 | ColumnwfRdiscInterfaceMulticastAdvt | read-only | mandatory | Couter for number of multicast advertisements |
| 1.3.6.1.4.1.18.3.5.3.2.1.17.1.12 | ColumnwfRdiscInterfaceDynamicPref | read-only | obsolete | Interface dynamic preference level (Higher is more prefered |
| 1.3.6.1.4.1.18.3.5.3.2.1.18 | TablewfIpNetToMediaEntryTable | not-accessible | mandatory | The list of elements in IP's host table |
| 1.3.6.1.4.1.18.3.5.3.2.1.18.1 | RowwfIpNetToMediaEntry | not-accessible | mandatory | A description of a resolved host |
| 1.3.6.1.4.1.18.3.5.3.2.1.18.1.1 | ColumnwfIpNetToMediaIfIndex | read-only | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.18.3.5.3.2.1.18.1.2 | ColumnwfIpNetToMediaPhysAddress | read-only | mandatory | The media-dependent `physical' address. |
| 1.3.6.1.4.1.18.3.5.3.2.1.18.1.3 | ColumnwfIpNetToMediaNetAddress | read-only | mandatory | The IpAddress corresponding to the media-dependent `physical' address. |
| 1.3.6.1.4.1.18.3.5.3.2.1.18.1.4 | ColumnwfIpNetToMediaType | read-write | mandatory | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e… |
| 1.3.6.1.4.1.18.3.5.3.2.1.19 | TablewfIpAccCtrlFilterTable | not-accessible | mandatory | IP Access Control Filter Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1 | RowwfIpAccCtrlFilterEntry | not-accessible | mandatory | Each entry corresponds to one filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.1 | ColumnwfIpAccCtrlFilterCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete the IP Access Control Filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.2 | ColumnwfIpAccCtrlFilterEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable this IP Access Control Filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.3 | ColumnwfIpAccCtrlFilterIndex | read-only | mandatory | Access Control Filter index number |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.4 | ColumnwfIpAccCtrlFilterName | read-write | mandatory | Access Control Filter name - user specified name for this filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.5 | ColumnwfIpAccCtrlFilterNetwork | read-write | mandatory | The network |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.6 | ColumnwfIpAccCtrlFilterNetworkMask | read-write | mandatory | The network mask |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.7 | ColumnwfIpAccCtrlFilterAction | read-write | mandatory | Filter action. |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.8 | ColumnwfIpAccCtrlFilterServiceMask | read-write | mandatory | IP upper layer services access mask. Possible values: telnet 0x01 ftp 0x02 tftp 0x04 snmp 0x08 ntp 0x10 rcmds 0x20 http 0x40 |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.9 | ColumnwfIpAccCtrlFilterDenyLog | read-write | mandatory | Enable/Disable log parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable log message when access is denied. |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.10 | ColumnwfIpAccCtrlFilterPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this access policy filter to other filters that a given route may match. A filter with a higher precedence v… |
| 1.3.6.1.4.1.18.3.5.3.2.1.19.1.11 | ColumnwfIpAccCtrlFilterId | read-write | mandatory | Filter ID. This is an assocation of the access control filter entry with the access control network entry and the access control user/host entry. |
| 1.3.6.1.4.1.18.3.5.3.2.1.20 | TablewfIpAccCtrlNetworkTable | not-accessible | mandatory | IP Access Control Network Entry Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.20.1 | RowwfIpAccCtrlNetworkEntry | not-accessible | mandatory | An entry for the IP access control network table. |
| 1.3.6.1.4.1.18.3.5.3.2.1.20.1.1 | ColumnwfIpAccCtrlNetworkCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete the IP Access Control Network Filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.20.1.2 | ColumnwfIpAccCtrlNetworkEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable this IP Access Control Network Filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.20.1.3 | ColumnwfIpAccCtrlNetworkIndex | read-only | mandatory | Access Control Network Network Filter index number |
| 1.3.6.1.4.1.18.3.5.3.2.1.20.1.4 | ColumnwfIpAccCtrlNetworkNetwork | read-write | mandatory | The network |
| 1.3.6.1.4.1.18.3.5.3.2.1.20.1.5 | ColumnwfIpAccCtrlNetworkNetworkMask | read-write | mandatory | The network mask |
| 1.3.6.1.4.1.18.3.5.3.2.1.20.1.6 | ColumnwfIpAccCtrlNetworkId | read-write | mandatory | Filter ID. This is an assocation of the access control filter entry with the access control network entry and the access control user/host entry. |
| 1.3.6.1.4.1.18.3.5.3.2.1.21 | TablewfIpAccCtrlUserHostTable | not-accessible | mandatory | IP Access Control User Host Entry Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.21.1 | RowwfIpAccCtrlUserHostEntry | not-accessible | mandatory | An entry for the IP access control user/host Table. |
| 1.3.6.1.4.1.18.3.5.3.2.1.21.1.1 | ColumnwfIpAccCtrlUserHostCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete the IP Access Control User/Host Filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.21.1.2 | ColumnwfIpAccCtrlUserHostEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable this IP Access Control User/Host Filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.21.1.3 | ColumnwfIpAccCtrlUserHostIndex | read-only | mandatory | Access Control User/Host Filter index number |
| 1.3.6.1.4.1.18.3.5.3.2.1.21.1.4 | ColumnwfIpAccCtrlUserHostUser | read-write | mandatory | The user ID |
| 1.3.6.1.4.1.18.3.5.3.2.1.21.1.5 | ColumnwfIpAccCtrlUserHostHost | read-write | mandatory | The host ID |
| 1.3.6.1.4.1.18.3.5.3.2.1.21.1.6 | ColumnwfIpAccCtrlUserHostId | read-write | mandatory | Filter ID. This is an assocation of the access control filter entry with the access control network entry and the access control user/host entry. |
| 1.3.6.1.4.1.18.3.5.3.2.1.22 | TablewfIpAddrTable | not-accessible | mandatory | The table of addressing information relevant to this entity's IP addresses. This table is used to directly map to the ipAddrTable in rfc1213 |
| 1.3.6.1.4.1.18.3.5.3.2.1.22.1 | RowwfIpAddrEntry | not-accessible | mandatory | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.18.3.5.3.2.1.22.1.1 | ColumnwfIpAdEntAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.18.3.5.3.2.1.22.1.2 | ColumnwfIpAdEntIfIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.18.3.5.3.2.1.22.1.3 | ColumnwfIpAdEntNetMask | read-only | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.18.3.5.3.2.1.22.1.4 | ColumnwfIpAdEntBcastAddr | read-only | mandatory | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.4.1.18.3.5.3.2.1.22.1.5 | ColumnwfIpAdEntReasmMaxSize | read-only | mandatory | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.23 | TablewfIpInternalHostTable | not-accessible | mandatory | Table of internal IP hosts. Maintains counts of received, delivered and reassembled packets. |
| 1.3.6.1.4.1.18.3.5.3.2.1.23.1 | RowwfIpInternalHostEntry | not-accessible | mandatory | An internal host table entry. |
| 1.3.6.1.4.1.18.3.5.3.2.1.23.1.1 | ColumnwfIpInternHtIpAddress | read-only | mandatory | IP address of the internal host. |
| 1.3.6.1.4.1.18.3.5.3.2.1.23.1.2 | ColumnwfIpInternHtReceives | read-only | mandatory | The number of datagrams received by the internal host. |
| 1.3.6.1.4.1.18.3.5.3.2.1.23.1.3 | ColumnwfIpInternHtInDelivers | read-only | mandatory | The number of packets delivered to reassmbly clients. |
| 1.3.6.1.4.1.18.3.5.3.2.1.23.1.4 | ColumnwfIpInternHtUnknownProtos | read-only | mandatory | The number of packets for which there was no client to deliver to. |
| 1.3.6.1.4.1.18.3.5.3.2.1.23.1.5 | ColumnwfIpInternHtReasmReqds | read-only | mandatory | The number of IP fragments received which needed to be reassembled at this internal host. |
| 1.3.6.1.4.1.18.3.5.3.2.1.23.1.6 | ColumnwfIpInternHtReasmFails | read-only | mandatory | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.4.1.18.3.5.3.2.1.23.1.7 | ColumnwfIpInternHtReasmOKs | read-only | mandatory | The number of IP datagrams successfully reassembled. |
| 1.3.6.1.4.1.18.3.5.3.2.1.23.1.8 | ColumnwfIpInternHtInHdrErrors | read-only | mandatory | The number of IP datagrams with errors in IP headers. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24 | TablewfIpIntfCfgTable | not-accessible | mandatory | The list of configured IP interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1 | RowwfIpIntfCfgEntry | not-accessible | mandatory | An IP cfg interface description |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.1 | ColumnwfIpIntfCfgCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IP interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.2 | ColumnwfIpIntfCfgEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IP interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.3 | ColumnwfIpIntfCfgState | read-only | mandatory | INvalid indicates an error in processing the cfg record |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.4 | ColumnwfIpIntfCfgAddr | read-only | mandatory | The IP Address to which this entry's addressing information pertains |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.5 | ColumnwfIpIntfCfgCircuit | read-only | mandatory | The Circuit Number that this interface runs over |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.6 | ColumnwfIpIntfCfgMask | read-write | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.7 | ColumnwfIpIntfCfgCost | read-write | mandatory | The Cost metric associated with the IP Address of this entry |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.8 | ColumnwfIpIntfCfgCfgBcastAddr | read-write | mandatory | The user can specifcy a broadcast address for a NWIF |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.9 | ColumnwfIpIntfCfgBcastAddr | read-only | mandatory | The value of the broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. This value applies to bo… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.10 | ColumnwfIpIntfCfgCfgMacAddress | read-write | mandatory | The desired mac set by the user |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.11 | ColumnwfIpIntfCfgMacAddress | read-only | mandatory | The MAC Address for this Interface- actual one used |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.12 | ColumnwfIpIntfCfgMTUDiscovery | read-write | mandatory | Whether MTU discovery option is on/off |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.13 | ColumnwfIpIntfCfgAMR | read-write | mandatory | Whether Address Mask Reply is ON/OFF |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.14 | ColumnwfIpIntfCfgASB | read-write | mandatory | Whether All-Subnet Broadcasts Are excepted and Sent out this NWIF |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.15 | ColumnwfIpIntfCfgAddressResolutionType | read-write | mandatory | Indicates which Address Resolution Type to use |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.16 | ColumnwfIpIntfCfgProxy | read-write | mandatory | Indicates Whether Proxy is on this Interface or not |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.17 | ColumnwfIpIntfCfgHostCache | read-write | mandatory | Whether the Host Cache (Address Aging) is on or not. A Range of discrete values is specified as well as a value meaning don't age |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.18 | ColumnwfIpIntfCfgUdpXsumOn | read-write | mandatory | Whether to turn UDP checksum verification on for UDP packets recieved and transmitted by this router |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.19 | ColumnwfIpIntfCfgTrEndStation | read-write | mandatory | Use Source Routing over token ring selection. Only applies if pam type is TRING. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.20 | ColumnwfIpIntfCfgSMDSGroupAddress | read-write | mandatory | The SMDS group address |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.21 | ColumnwfIpIntfCfgSMDSArpReqAddress | read-write | mandatory | The SMDS arp req address |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.22 | ColumnwfIpIntfCfgFRBcastDlci | read-write | mandatory | Frame Relay broadcast dlci |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.23 | ColumnwfIpIntfCfgFRMcast1Dlci | read-write | mandatory | Frame Relay multicast dlci #1 |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.24 | ColumnwfIpIntfCfgFRMcast2Dlci | read-write | mandatory | Frame Relay multicast dlci #2 |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.25 | ColumnwfIpIntfCfgRedirect | read-write | mandatory | Indicates Whether we're sending out redirects on this Interface or not |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.26 | ColumnwfIpIntfCfgEnetArpEncaps | read-write | mandatory | The data link encapsulation type to use for ARP packets if the the media is ethernet. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.27 | ColumnwfIpIntfCfgSlotMask | read-write | mandatory | Slot mask for which slots a circuit-less interface is eligible to run on. The most significant bit represents slot 1, the next most significant bit represents … |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.28 | ColumnwfIpIntfCfgEnableSecurity | read-write | mandatory | Enables RIPSO on this interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.29 | ColumnwfIpIntfCfgStripSecurity | read-write | mandatory | Defines which packets will have security option removed. This is a bit mask. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.30 | ColumnwfIpIntfCfgRequireOutSecurity | read-write | mandatory | Defines which types of outbound packets are required to have a security option. This is a bit mask. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.31 | ColumnwfIpIntfCfgRequireInSecurity | read-write | mandatory | Defines whether or not incoming packets must have security option. This is a bit mask. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.32 | ColumnwfIpIntfCfgMinLevel | read-write | mandatory | Defines the minimum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL … |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.33 | ColumnwfIpIntfCfgMaxLevel | read-write | mandatory | Defines the maximum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL … |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.34 | ColumnwfIpIntfCfgMustOutAuthority | read-write | mandatory | Defines the authority bits that must be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the … |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.35 | ColumnwfIpIntfCfgMayOutAuthority | read-write | mandatory | Defines the authority bits that may be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the f… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.36 | ColumnwfIpIntfCfgMustInAuthority | read-write | mandatory | Defines the authority bits that must be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the fir… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.37 | ColumnwfIpIntfCfgMayInAuthority | read-write | mandatory | Defines the authority bits that may be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the firs… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.38 | ColumnwfIpIntfCfgImplicitLabelEnabled | read-write | mandatory | Should an implicit label be associated with any inbound unlabelled datagrams? |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.39 | ColumnwfIpIntfCfgImplicitAuth | read-write | mandatory | Defines the authority bits in the implicit label associated with an unlabelled inbound datagram. This is a bit map. 'NONE' means that a 3-byte option label (no… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.40 | ColumnwfIpIntfCfgImplicitLevel | read-write | mandatory | Defines the classification level byte in the implicit label associated with an unlabelled inbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_L… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.41 | ColumnwfIpIntfCfgDefaultLabelEnabled | read-write | mandatory | Should a default label be associated with any not-yet-labelled oubound datagrams? |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.42 | ColumnwfIpIntfCfgDefaultAuth | read-write | mandatory | Defines the authority bits in the default label associated with a not-yet-labelled outbound datagram. This is a bit map. 'NONE' means that a 3-byte option labe… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.43 | ColumnwfIpIntfCfgDefaultLevel | read-write | mandatory | Defines the classification level byte to use in the default label associated with a not-yet-labelled outbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.44 | ColumnwfIpIntfCfgErrorLabelEnabled | read-write | mandatory | Should an error label be associated with any outbound ICMP error packets? |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.45 | ColumnwfIpIntfCfgErrorAuth | read-write | mandatory | Defines the authority bits in the error label associated with any outbount ICMP error packets. This is a bit map. 'NONE' means that a 3-byte option label (no a… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.46 | ColumnwfIpIntfCfgFwdCacheSize | read-write | mandatory | Maximum number of entries allowed in the Forwarding Table at one time. There is a forwarding table per interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.47 | ColumnwfIpIntfCfgUnnumAsocAddr | read-write | mandatory | The Associated IP address used by unnumbered interfaces when sourcing a packet. Rip also uses this attribute to make decisions about advertising subnets over u… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.48 | ColumnwfIpIntfCfgUnnumAsocAlt | read-write | mandatory | Enable/Disable parameter. Default is disabled. Users perform a set operation on this object in order to enable/disable the option to automatically assign an al… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.49 | ColumnwfIpIntfCfgAtmArpMode | read-write | mandatory | Indicates whether ATMARP is a client or running as a server. A value of 'none' is for ATM WAN SVCs feature |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.50 | ColumnwfIpIntfCfgAtmArpSrvAddress | read-write | mandatory | The ATMARP server address |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.51 | ColumnwfIpIntfCfgAtmArpSrvVcAgingEnable | read-write | mandatory | Indicates whether the ATMARP server VC should be aged (for client operation) |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.52 | ColumnwfIpIntfCfgAtmArpSrvRegInterval | read-write | mandatory | For client operation, the interval between registration refreshes. For a server. this will be the duration a registration is valid. (in seconds) |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.53 | ColumnwfIpIntfCfgAtmArpMisc | read-write | mandatory | Not in use. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.54 | ColumnwfIpIntfCfgAtmArpMisc2 | read-write | mandatory | Not in use. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.55 | ColumnwfIpIntfCfgAtmArpSrvConnState | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.56 | ColumnwfIpIntfCfgTrEsArpType | read-write | mandatory | Token Ring End Station ARP type ARE / STE |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.57 | ColumnwfIpIntfCfgMprMode | read-write | mandatory | Multicast Packet Replicator activation mode |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.58 | ColumnwfIpIntfCfgMprState | read-only | mandatory | Invalid indicates an error in processing the MPR record |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.59 | ColumnwfIpIntfCfgIPSecEnable | read-write | mandatory | If this IP interface is enabled for IPSec, it will provide security services to IP packets forwarded through this interface as well as IPSec packets meant for … |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.60 | ColumnwfIpIntfCfgIPSecLogLevel | read-write | mandatory | 32-bit integer used to tune the level of IPSec logging. |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.61 | ColumnwfIpIntfCfgTosTemplate | read-write | obsolete | The instance ID of the ToS template (from wfIpTosTemplateTable being used by this interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.62 | ColumnwfIpIntfCfgMsgLevel | read-write | mandatory | IP Interface log messages level. To control level of log messages DBG_MSG_ALL 0x001f0000 - 2031616 DBG_MSG_DEBUG 0x00010000 - 65536 DBG_MSG_INFO 0x00020000 - 1… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.63 | ColumnwfIpIntfCfgMtu | read-write | mandatory | Allows user to configure the MTU of the interface. The actual MTU used by the interface will be the minimum value of this parameter and the underlying circuit'… |
| 1.3.6.1.4.1.18.3.5.3.2.1.24.1.64 | ColumnwfIpIntfCfgDropIpMacBroadcast | read-write | mandatory | enable /disable parameter for interface to drop IP packets which were broadcasted at the ethernet level |
| 1.3.6.1.4.1.18.3.5.3.2.1.25 | TablewfIpIntfStatsTable | not-accessible | mandatory | The list of configured IP interface stats |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1 | RowwfIpIntfStatsEntry | not-accessible | mandatory | An IP stats interface description |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.1 | ColumnwfIpIntfStatsAddr | read-only | mandatory | The IP Address to which this entry's addressing information pertains |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.2 | ColumnwfIpIntfStatsCircuit | read-only | mandatory | The Circuit Number that this interface runs over |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.3 | ColumnwfIpIntfStatsReasmMaxSize | read-only | mandatory | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.4 | ColumnwfIpIntfStatsMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.5 | ColumnwfIpIntfStatsInReceives | read-only | mandatory | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.6 | ColumnwfIpIntfStatsInHdrErrors | read-only | mandatory | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live … |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.7 | ColumnwfIpIntfStatsInAddrErrors | read-only | mandatory | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th… |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.8 | ColumnwfIpIntfStatsForwDatagrams | read-only | mandatory | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.9 | ColumnwfIpIntfStatsInUnknownProtos | read-only | mandatory | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.10 | ColumnwfIpIntfStatsInDiscards | read-only | mandatory | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff… |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.11 | ColumnwfIpIntfStatsInDelivers | read-only | mandatory | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.12 | ColumnwfIpIntfStatsOutRequests | read-only | mandatory | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in… |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.13 | ColumnwfIpIntfStatsOutDiscards | read-only | mandatory | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for … |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.14 | ColumnwfIpIntfStatsOutNoRoutes | read-only | mandatory | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted… |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.15 | ColumnwfIpIntfStatsReasmTimeout | read-only | mandatory | The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.16 | ColumnwfIpIntfStatsReasmReqds | read-only | mandatory | The number of IP fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.17 | ColumnwfIpIntfStatsReasmOKs | read-only | mandatory | The number of IP datagrams successfully reassembled. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.18 | ColumnwfIpIntfStatsReasmFails | read-only | mandatory | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.19 | ColumnwfIpIntfStatsFragOKs | read-only | mandatory | The number of IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.20 | ColumnwfIpIntfStatsFragFails | read-only | mandatory | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl… |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.21 | ColumnwfIpIntfStatsFragCreates | read-only | mandatory | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.22 | ColumnwfIpIntfStatsCacheMisses | read-only | mandatory | The number of FFT cache misses (i.e how many times did the cache gate have to do a look up in the RNP because the FFT didn't have the destination network |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.23 | ColumnwfIpIntfStatsCacheNetworks | read-only | mandatory | Between 0 and wfIpInterfaceFwdCacheSize |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.24 | ColumnwfIpIntfStatsCacheRemoves | read-only | mandatory | The number of networks which have been flushed from the FFT because of aging |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.25 | ColumnwfIpIntfStatsDropRxAuths | read-only | mandatory | Number of received packets dropped because the authority flag(s) were not sufficient. This could mean that the 'must' flags were not all there, or that the fla… |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.26 | ColumnwfIpIntfStatsDropRxFormats | read-only | mandatory | Number of received packets dropped because the security option format was invalid. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.27 | ColumnwfIpIntfStatsDropRxLevels | read-only | mandatory | Number of received packets dropped because the classification level was out of range. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.28 | ColumnwfIpIntfStatsDropRxNoIpsos | read-only | mandatory | Number of received packets dropped because no IP security label was present. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.29 | ColumnwfIpIntfStatsDropTxAuths | read-only | mandatory | Number of transmitted packets dropped because the authority flag(s) were not sufficient. This could mean that the 'must' flags were not all there, or that the … |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.30 | ColumnwfIpIntfStatsDropTxLevels | read-only | mandatory | Number of transmitted packets dropped because the classification level was out of range. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.31 | ColumnwfIpIntfStatsDropTxNoIpsos | read-only | mandatory | Number of packets not transmitted because no IP security label was present. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.32 | ColumnwfIpIntfStatsDropTxNoIpsoRooms | read-only | mandatory | Number of packets not transmitted because there was not enough space left in the IP header to insert an IP security option. |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.33 | ColumnwfIpIntfStatsRoutingDiscards | read-only | mandatory | The number of routing entries which were chosen to be discarded even though they are valid |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.34 | ColumnwfIpIntfStatsAtmArpAttemptedCalls | read-only | mandatory | Indicates the number of calls ATMARP has attempted |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.35 | ColumnwfIpIntfStatsAtmArpFailRetryCalls | read-only | mandatory | Indicates the number of attempted calls that have failed, but were retried |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.36 | ColumnwfIpIntfStatsAtmArpFailNoRetryCalls | read-only | mandatory | Indicates the number of attempted calls that have failed, and were not retried |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.37 | ColumnwfIpIntfStatsAtmArpSuccessfulCalls | read-only | mandatory | Indicates the number of originated calls completed successfully |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.38 | ColumnwfIpIntfStatsAtmArpAcceptedCalls | read-only | mandatory | Indicates the number of received calls that were accepted |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.39 | ColumnwfIpIntfStatsAtmArpOpenSvcs | read-only | mandatory | Indicates the number of currently open calls |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.40 | ColumnwfIpIntfStatsMcastInPkts | read-only | mandatory | The number of multicast packets received by the interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.41 | ColumnwfIpIntfStatsMcastOutPkts | read-only | mandatory | the number of multicast packets transmitted by the interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.42 | ColumnwfIpIntfStatsMcastInDataPkts | read-only | mandatory | The number of multicast data packets received by the interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.43 | ColumnwfIpIntfStatsControlPathInPkts | read-only | mandatory | the number of control path packets received by the interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.25.1.44 | ColumnwfIpIntfStatsControlPathOutPkts | read-only | mandatory | the number of control path packets transmitted by the interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.26 | TablewfIpIntfStatsIcmpTable | not-accessible | mandatory | The list of configured IP icmp stats interface |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1 | RowwfIpIntfStatsIcmpEntry | not-accessible | mandatory | An IP interface icmp stats description |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.1 | ColumnwfIpIntfStatsIcmpAddr | read-only | mandatory | The IP Address to which this entry's addressing information pertains |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.2 | ColumnwfIpIntfStatsIcmpCircuit | read-only | mandatory | The Circuit Number that this interface runs over |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.3 | ColumnwfIpIntfStatsIcmpInMsgs | read-only | mandatory | The total number of ICMP messages which includes all those counted by wfIpInterfaceIcmpInErrors. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.4 | ColumnwfIpIntfStatsIcmpInErrors | read-only | mandatory | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.5 | ColumnwfIpIntfStatsIcmpInDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.6 | ColumnwfIpIntfStatsIcmpInTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.7 | ColumnwfIpIntfStatsIcmpInParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.8 | ColumnwfIpIntfStatsIcmpInSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.9 | ColumnwfIpIntfStatsIcmpInRedirects | read-only | mandatory | The number of ICMP Redirect messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.10 | ColumnwfIpIntfStatsIcmpInEchos | read-only | mandatory | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.11 | ColumnwfIpIntfStatsIcmpInEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.12 | ColumnwfIpIntfStatsIcmpInTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.13 | ColumnwfIpIntfStatsIcmpInTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.14 | ColumnwfIpIntfStatsIcmpInAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.15 | ColumnwfIpIntfStatsIcmpInAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.16 | ColumnwfIpIntfStatsIcmpOutMsgs | read-only | mandatory | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.17 | ColumnwfIpIntfStatsIcmpOutErrors | read-only | mandatory | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.18 | ColumnwfIpIntfStatsIcmpOutDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.19 | ColumnwfIpIntfStatsIcmpOutTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.20 | ColumnwfIpIntfStatsIcmpOutParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.21 | ColumnwfIpIntfStatsIcmpOutSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.22 | ColumnwfIpIntfStatsIcmpOutRedirects | read-only | mandatory | The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.23 | ColumnwfIpIntfStatsIcmpOutEchos | read-only | mandatory | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.24 | ColumnwfIpIntfStatsIcmpOutEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.25 | ColumnwfIpIntfStatsIcmpOutTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.26 | ColumnwfIpIntfStatsIcmpOutTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.27 | ColumnwfIpIntfStatsIcmpOutAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.28 | ColumnwfIpIntfStatsIcmpOutAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.29 | ColumnwfIpIntfStatsIcmpInAdminProhib | read-only | mandatory | Number of ICMP dest unreachable/communication administratively prohibited messages received. Note: may be sent by BFE or another system |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.30 | ColumnwfIpIntfStatsIcmpOutAdminProhib | read-only | mandatory | Number of ICMP dest unreachable/communication administratively prohibited messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.31 | ColumnwfIpIntfStatsIcmpInRdiscSolicit | read-only | mandatory | The number of ICMP Router Discovery Solicit messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.32 | ColumnwfIpIntfStatsIcmpInRdiscAdvert | read-only | mandatory | The number of ICMP Router Discovery Advertisement messages received. |
| 1.3.6.1.4.1.18.3.5.3.2.1.26.1.33 | ColumnwfIpIntfStatsIcmpOutRdiscAdvert | read-only | mandatory | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.4.1.18.3.5.3.2.1.27 | TablewfIpGreTnlTable | not-accessible | mandatory | GRE tunnel definitions |
| 1.3.6.1.4.1.18.3.5.3.2.1.27.1 | RowwfIpGreTnlEntry | not-accessible | mandatory | A GRE tunnel definition |
| 1.3.6.1.4.1.18.3.5.3.2.1.27.1.1 | ColumnwfIpGreTnlCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete a GRE tunnel. |
| 1.3.6.1.4.1.18.3.5.3.2.1.27.1.2 | ColumnwfIpGreTnlEnable | read-write | mandatory | Enable/Disable parameter. Default is enableded. Users perform a set operation on this object in order to enable/disablea GRE tunnel. |
| 1.3.6.1.4.1.18.3.5.3.2.1.27.1.3 | ColumnwfIpGreTnlState | read-only | mandatory | State of the GRE tunnel |
| 1.3.6.1.4.1.18.3.5.3.2.1.27.1.4 | ColumnwfIpGreTnlNum | read-only | mandatory | GRE tunnel number |
| 1.3.6.1.4.1.18.3.5.3.2.1.27.1.5 | ColumnwfIpGreTnlName | read-write | mandatory | GRE tunnel name |
| 1.3.6.1.4.1.18.3.5.3.2.1.27.1.6 | ColumnwfIpGreTnlCctNum | read-write | mandatory | Circuit number associated with GRE tunnel |
| 1.3.6.1.4.1.18.3.5.3.2.1.27.1.7 | ColumnwfIpGreTnlLocIpAddr | read-write | mandatory | GRE tunnel local IP address |
| 1.3.6.1.4.1.18.3.5.3.2.1.27.1.8 | ColumnwfIpGreTnlMinMtu | read-write | mandatory | Minimum MTU for GRE tunnel |
| 1.3.6.1.4.1.18.3.5.3.2.1.28 | TablewfIpGreConnTable | not-accessible | mandatory | Definitions of GRE tunnel connections. Each point to multipoint tunnel is a group (possibly with only 1 member) of point to point connections which share local… |
| 1.3.6.1.4.1.18.3.5.3.2.1.28.1 | RowwfIpGreConnEntry | not-accessible | mandatory | A GRE tunnel connection definition |
| 1.3.6.1.4.1.18.3.5.3.2.1.28.1.1 | ColumnwfIpGreConnCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete a GRE connection. |
| 1.3.6.1.4.1.18.3.5.3.2.1.28.1.2 | ColumnwfIpGreConnEnable | read-write | mandatory | Enable/Disable parameter. Default is enableded. Users perform a set operation on this object in order to enable/disablea GRE connection. |
| 1.3.6.1.4.1.18.3.5.3.2.1.28.1.3 | ColumnwfIpGreConnTnlNum | read-only | mandatory | GRE tunnel number for this connection. This ties the connection to a local endpoint. |
| 1.3.6.1.4.1.18.3.5.3.2.1.28.1.4 | ColumnwfIpGreConnNum | read-only | mandatory | GRE tunnel connection number. |
| 1.3.6.1.4.1.18.3.5.3.2.1.28.1.5 | ColumnwfIpGreConnName | read-write | mandatory | GRE connection name |
| 1.3.6.1.4.1.18.3.5.3.2.1.28.1.6 | ColumnwfIpGreConnRemIpAddr | read-write | mandatory | GRE tunnel connection remote IP address |
| 1.3.6.1.4.1.18.3.5.3.2.1.28.1.7 | ColumnwfIpGreConnProtoMap | read-write | mandatory | CONN_PROTO_IP 1 CONN_PROTO_IPX 2 CONN_PROTO_OSI 4 |
| 1.3.6.1.4.1.18.3.5.3.2.1.29 | TablewfIpFilterRuleTable | not-accessible | mandatory | Definition of filter rules |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1 | RowwfIpFilterRuleEntry | not-accessible | mandatory | Each entry contains the definition of a traffic filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1.1 | ColumnwfIpFilterRuleCreate | read-write | mandatory | The row (object) creation/deletion attribute for this filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1.2 | ColumnwfIpFilterRuleNumber | read-only | mandatory | The rule number for this rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1.3 | ColumnwfIpFilterRuleName | read-write | mandatory | The name of this filter rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1.4 | ColumnwfIpFilterRuleDescription | read-write | mandatory | The filter rule definition. |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1.5 | ColumnwfIpFilterRuleFragment | read-only | mandatory | Fragment number for large rules. |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1.6 | ColumnwfIpFilterRuleNewTosValue | read-write | mandatory | The new TOS value to apply to packets that match the filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1.7 | ColumnwfIpFilterRuleNewTosValueMask | read-write | mandatory | The mask to apply to the new TOS value to not change other bits in the TOS field. |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1.8 | ColumnwfIpFilterRuleAction | read-write | mandatory | The action to take if the packet matches the filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1.9 | ColumnwfIpFilterRuleClassifyAction | read-write | mandatory | The action to take to classify the packet if it matches the filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.29.1.10 | ColumnwfIpFilterRuleDropPreference | read-write | mandatory | The drop preference for packets matching this rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.30 | TablewfIpFilterConfigTable | not-accessible | mandatory | Configuration information for IP Traffic Filters |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1 | RowwfIpFilterConfigEntry | not-accessible | mandatory | A traffic filter definition of configuration information |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.1 | ColumnwfIpFilterConfigCreate | read-write | mandatory | Defines the existence of the traffic filter rule: created - traffic filter exists deleted - traffic filter does not exist and can be deleted. |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.2 | ColumnwfIpFilterConfigEnable | read-write | mandatory | Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.3 | ColumnwfIpFilterConfigStatus | read-only | mandatory | Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error… |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.4 | ColumnwfIpFilterConfigRuleNumber | read-write | mandatory | The number of the rule from the table wfIpFilterRuleEntry. |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.5 | ColumnwfIpFilterConfigRulePrecedence | read-write | mandatory | The precedence of this rule in relation to other rules configured for this interface. |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.6 | ColumnwfIpFilterConfigFilterType | read-write | mandatory | The type of filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.7 | ColumnwfIpFilterConfigLogFilterInfo | read-write | mandatory | When enabled, this attribute will log a message to the log with information about the filter. |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.8 | ColumnwfIpFilterConfigReserved | read-only | mandatory | Reserved field. |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.9 | ColumnwfIpFilterConfigInterface | read-only | mandatory | The network address of the IP interface to which this filter is applied. |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.10 | ColumnwfIpFilterConfigCircuit | read-only | mandatory | The ID of the Circuit to which the filter is applied. |
| 1.3.6.1.4.1.18.3.5.3.2.1.30.1.11 | ColumnwfIpFilterConfigIndex | read-only | mandatory | Index for the rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.31 | TablewfIpFilterStatsTable | not-accessible | mandatory | Statistical information for IP Traffic Filters |
| 1.3.6.1.4.1.18.3.5.3.2.1.31.1 | RowwfIpFilterStatsEntry | not-accessible | mandatory | A traffic filter definition of statistical information |
| 1.3.6.1.4.1.18.3.5.3.2.1.31.1.1 | ColumnwfIpFilterStatsCounter | read-only | mandatory | The number of received packets that have matched this rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.31.1.2 | ColumnwfIpFilterStatsInterface | read-only | mandatory | The network address of the IP interface to which this filter is applied. |
| 1.3.6.1.4.1.18.3.5.3.2.1.31.1.3 | ColumnwfIpFilterStatsCircuit | read-only | mandatory | The ID of the Circuit to which the filter is applied. |
| 1.3.6.1.4.1.18.3.5.3.2.1.31.1.4 | ColumnwfIpFilterStatsIndex | read-only | mandatory | Index for the rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.32 | TablewfIpTosTemplateCfgTable | not-accessible | obsolete | The list of user configured ToS/DS byte interpretation/mapping templates |
| 1.3.6.1.4.1.18.3.5.3.2.1.32.1 | RowwfIpTosTemplateCfgEntry | not-accessible | obsolete | A ToS/DS byte interpretation/mapping |
| 1.3.6.1.4.1.18.3.5.3.2.1.32.1.1 | ColumnwfIpTosTemplateCfgCreate | read-write | obsolete | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete a ToS template. |
| 1.3.6.1.4.1.18.3.5.3.2.1.32.1.2 | ColumnwfIpTosTemplateCfgIndex | read-only | obsolete | The identifier of this ToS/DS byte interpretation/mapping |
| 1.3.6.1.4.1.18.3.5.3.2.1.32.1.3 | ColumnwfIpTosTemplateCfgName | read-write | obsolete | User-specified name of this ToS/DS byte interpretation/ mapping template |
| 1.3.6.1.4.1.18.3.5.3.2.1.32.1.4 | ColumnwfIpTosTemplateCfgStatus | read-only | obsolete | The status of this entry in the table. valid(1) indicates the template has been configured correctly. invalid(2) indicates there is a problem with the entry. n… |
| 1.3.6.1.4.1.18.3.5.3.2.1.32.1.5 | ColumnwfIpTosTemplateCfgRxEnable | read-write | obsolete | Indicates if the ToS/DS byte is interpreted for packets received on IP interfaces using this template. disabled - The ToS field is ignored. All received packet… |
| 1.3.6.1.4.1.18.3.5.3.2.1.32.1.6 | ColumnwfIpTosTemplateCfgRxMapping | read-write | obsolete | RxMapping controls the mapping of the ToS/DS byte to an internal service class (ISC). It consists of a list of (pattern, mask, ISC, DP) tuples. If the ToS byte… |
| 1.3.6.1.4.1.18.3.5.3.2.1.32.1.7 | ColumnwfIpTosTemplateCfgTxEnable | read-write | obsolete | TxHandling Indicates how the ToS/DS byte is handled for packets transmitted on IP interfaces using this interpretation/mapping template: disable - no changes i… |
| 1.3.6.1.4.1.18.3.5.3.2.1.32.1.8 | ColumnwfIpTosTemplateCfgTxMapping | read-write | obsolete | TxMapping controls the mapping of the Internal Service Class (ISC) to the ToS/DS byte. It consists of a list of (pattern, mask, ISC, DP) tuples stored in the s… |
| 1.3.6.1.4.1.18.3.5.3.2.1.33 | TablewfIpTosTemplateTable | not-accessible | obsolete | The list of ToS/DS byte interpretation/mapping templates |
| 1.3.6.1.4.1.18.3.5.3.2.1.33.1 | RowwfIpTosTemplateEntry | not-accessible | obsolete | A ToS/DS byte interpretation/mapping |
| 1.3.6.1.4.1.18.3.5.3.2.1.33.1.1 | ColumnwfIpTosTemplateIndex | read-only | obsolete | The identifier of this ToS/DS byte interpretation/mapping |
| 1.3.6.1.4.1.18.3.5.3.2.1.33.1.2 | ColumnwfIpTosTemplateName | read-only | obsolete | User-specified name of this ToS/DS byte interpretation/ mapping template |
| 1.3.6.1.4.1.18.3.5.3.2.1.33.1.3 | ColumnwfIpTosTemplateStatus | read-only | obsolete | The status of this entry in the table. valid(1) indicates the template has been configured correctly. invalid(2) indicates there is a problem with the entry. b… |
| 1.3.6.1.4.1.18.3.5.3.2.1.33.1.4 | ColumnwfIpTosTemplateRxEnable | read-only | obsolete | Indicates if the ToS/DS byte is interpreted for packets received on IP interfaces using this template. disabled - The ToS field is ignored. All received packet… |
| 1.3.6.1.4.1.18.3.5.3.2.1.33.1.5 | ColumnwfIpTosTemplateRxMapping | read-only | obsolete | RxMapping controls the mapping of the ToS/DS byte to an internal service class (ISC). It consists of a list of (pattern, mask, ISC, DP) tuples. If the ToS byte… |
| 1.3.6.1.4.1.18.3.5.3.2.1.33.1.6 | ColumnwfIpTosTemplateTxEnable | read-only | obsolete | TxHandling Indicates how the ToS/DS byte is handled for packets transmitted on IP interfaces using this interpretation/mapping template: disable - no changes i… |
| 1.3.6.1.4.1.18.3.5.3.2.1.33.1.7 | ColumnwfIpTosTemplateTxMapping | read-only | obsolete | TxMapping controls the mapping of the Internal Service Class (ISC) to the ToS/DS byte. It consists of a list of (pattern, mask, ISC, DP) tuples stored in the s… |
| 1.3.6.1.4.1.18.3.5.3.2.1.34 | NodewfIpBaseDbg | |||
| 1.3.6.1.4.1.18.3.5.3.2.1.34.1 | ScalarwfIpBaseDbgCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IP base debug. |
| 1.3.6.1.4.1.18.3.5.3.2.1.34.2 | ScalarwfIpBaseDbgOptions | read-write | mandatory | reserved |
| 1.3.6.1.4.1.18.3.5.3.2.1.34.3 | ScalarwfIpBaseDbgAddress | read-write | mandatory | reserved |
| 1.3.6.1.4.1.18.3.5.3.2.1.34.4 | ScalarwfIpBaseDbgAddressMask | read-write | mandatory | reserved |
| 1.3.6.1.4.1.18.3.5.3.2.1.34.5 | ScalarwfIpBaseDbgMisc | read-write | mandatory | reserved |
| 1.3.6.1.4.1.18.3.5.3.2.1.35 | TablewfIpFilterTemplateTable | not-accessible | mandatory | Defines the criteria, actions and action data of an IP Traffic Filter. An entry in this table will be pointed to by the wfIpTrafficFilterDefinition attribute o… |
| 1.3.6.1.4.1.18.3.5.3.2.1.35.1 | RowwfIpFilterTemplateEntry | not-accessible | mandatory | An IP Traffic Filter definition |
| 1.3.6.1.4.1.18.3.5.3.2.1.35.1.1 | ColumnwfIpFilterTemplateCreate | read-write | mandatory | Defines the existence of the traffic filter template; created - traffic filter template exists; deleted - traffic filter template does not exist and can be del… |
| 1.3.6.1.4.1.18.3.5.3.2.1.35.1.2 | ColumnwfIpFilterTemplateRuleNumber | read-only | mandatory | ID for the template. |
| 1.3.6.1.4.1.18.3.5.3.2.1.35.1.3 | ColumnwfIpFilterTemplateFragment | read-only | mandatory | Fragment number - for large rules. |
| 1.3.6.1.4.1.18.3.5.3.2.1.35.1.4 | ColumnwfIpFilterTemplateDefinition | read-write | mandatory | The criteria, actions and action data that defines the filter template. |
| 1.3.6.1.4.1.18.3.5.3.2.1.35.1.5 | ColumnwfIpFilterTemplateName | read-write | mandatory | The name of this filter template. |
| 1.3.6.1.4.1.18.3.5.3.2.2.1 | TablewfRipIntfTable | not-accessible | obsolete | The list of configured RIP interfaces |
| 1.3.6.1.4.1.18.3.5.3.2.2.1.1 | RowwfRipIntfEntry | not-accessible | obsolete | A description of a RIP interface |
| 1.3.6.1.4.1.18.3.5.3.2.2.1.1.1 | ColumnwfRipInterfaceCreate | read-write | obsolete | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an RIP Interface instance. |
| 1.3.6.1.4.1.18.3.5.3.2.2.1.1.2 | ColumnwfRipInterfaceEnable | read-write | obsolete | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a RIP interface. |
| 1.3.6.1.4.1.18.3.5.3.2.2.1.1.3 | ColumnwfRipInterfaceState | read-only | obsolete | The current state of RIP on this interface. |
| 1.3.6.1.4.1.18.3.5.3.2.2.1.1.4 | ColumnwfRipInterfaceIndex | read-only | obsolete | The IP interface to run RIP on. |
| 1.3.6.1.4.1.18.3.5.3.2.2.1.1.5 | ColumnwfRipInterfaceSupply | read-write | obsolete | Transmit RIP packets. |
| 1.3.6.1.4.1.18.3.5.3.2.2.1.1.6 | ColumnwfRipInterfaceListen | read-write | obsolete | Whether to listen to RIP packets |
| 1.3.6.1.4.1.18.3.5.3.2.2.1.1.7 | ColumnwfRipInterfaceDefaultRouteSupply | read-write | obsolete | Transmit the default route, 0.0.0.0, in RIP packets. |
| 1.3.6.1.4.1.18.3.5.3.2.2.1.1.8 | ColumnwfRipInterfaceDefaultRouteListen | read-write | obsolete | Receive the default route, 0.0.0.0, in RIP packets. |
| 1.3.6.1.4.1.18.3.5.3.2.2.1.1.9 | ColumnwfRipInterfacePoisonedReversed | read-write | obsolete | Specifies how the router advertises routes it has learned from a neighboring router in periodic updates subsequently sent to the neighbor. If 'Poisoned', the n… |
| 1.3.6.1.4.1.18.3.5.3.2.2.2 | TablewfRipInterfaceTable | not-accessible | mandatory | The list of configured RIP interfaces |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1 | RowwfRipInterfaceEntry | not-accessible | mandatory | A description of a RIP interface |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.1 | ColumnwfRipIntfCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an RIP Interface instance. |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.2 | ColumnwfRipIntfEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a RIP interface. |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.3 | ColumnwfRipIntfState | read-only | mandatory | The current state of RIP on this interface. |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.4 | ColumnwfRipIntfIndex | read-only | mandatory | The IP interface to run RIP on. |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.5 | ColumnwfRipIntfSupply | read-write | mandatory | Transmit RIP packets. |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.6 | ColumnwfRipIntfListen | read-write | mandatory | Whether to listen to RIP packets |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.7 | ColumnwfRipIntfDefaultRouteSupply | read-write | mandatory | Transmit the default route, 0.0.0.0, in RIP packets. |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.8 | ColumnwfRipIntfDefaultRouteListen | read-write | mandatory | Receive the default route, 0.0.0.0, in RIP packets. |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.9 | ColumnwfRipIntfPoisonedReversed | read-write | mandatory | Specifies how the router advertises routes it has learned from a neighboring router in periodic updates subsequently sent to the neighbor. If 'Poisoned', the n… |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.10 | ColumnwfRipIntfCct | read-only | mandatory | Circuit number of the IP interface |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.11 | ColumnwfRipIntfTTL | read-write | mandatory | Time To Live in the IP Header for RIP updates |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.12 | ColumnwfRipIntfBroadcastTimer | read-write | mandatory | This parameter allows the user to configure the frequency of full RIP updates. The default is per the standard. If DOR ( Dial Optimized Routing ) is not config… |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.13 | ColumnwfRipIntfTimeoutTimer | read-write | mandatory | This parameter allows the user to configure the time period which RIP will wait before timing out a route. This time is typically 3 x the broadcast timer. The … |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.14 | ColumnwfRipIntfHolddownTimer | read-write | mandatory | This parameter allows the user to configure the time period which unreachable routes will be held in the Routing Pool. This time is typically 3 x the broadcast… |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.15 | ColumnwfRipIntfCompSwitch | read-write | mandatory | This parameter allows the user to configure which mode of RIP to run. The default is to run RIP1. RIP2 mode runs RIP2. This does not do automatic aggregation o… |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.16 | ColumnwfRipIntfTriggeredUpdates | read-write | mandatory | This parameter allows the user to configure triggered updates. By default this parameter is disabled to conform with previous release action. |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.17 | ColumnwfRipIntfAuthType | read-write | mandatory | Specifies the type of Authentication to be used with RIP. This is only valid when running RIP2 |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.18 | ColumnwfRipIntfAuthentication | read-write | mandatory | Contains the authentication if the Authentication Type is set to simple password. This field contains up to 16 characters. |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.19 | ColumnwfRipIntfInitStabilizationTimer | read-write | mandatory | This parameter allows the user to cofigure the time period which RIP will use as its initial stabilization time length. It allows RIP to learn all routes from … |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.20 | ColumnwfRipIntfSVCBroadcast | read-write | mandatory | Defines whether Frame Relay SVCs should be established for all adjacent hosts before sending an update. |
| 1.3.6.1.4.1.18.3.5.3.2.2.2.1.21 | ColumnwfRipIntfDefaultRouteCost | read-write | mandatory | Defines the default route cost when the route is being generated. The cost is added in case the default route supply is set to enable. |
| 1.3.6.1.4.1.18.3.5.3.4.1 | NodewfUdp | |||
| 1.3.6.1.4.1.18.3.5.3.4.1.1 | ScalarwfUdpInDatagrams | read-only | mandatory | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.4.1.18.3.5.3.4.1.2 | ScalarwfUdpNoPorts | read-only | mandatory | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.4.1.18.3.5.3.4.1.3 | ScalarwfUdpInErrors | read-only | mandatory | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.4.1.18.3.5.3.4.1.4 | ScalarwfUdpOutDatagrams | read-only | mandatory | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.4.1.18.3.5.3.4.2 | TablewfUdpTable | not-accessible | mandatory | The UDP listener table contains information about this entity's UDP end-points on which a local application is currently accepting datagrams. |
| 1.3.6.1.4.1.18.3.5.3.4.2.1 | RowwfUdpEntry | not-accessible | mandatory | A particular entry |
| 1.3.6.1.4.1.18.3.5.3.4.2.1.1 | ColumnwfUdpLocalAddress | read-only | mandatory | The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface asociated with the node, th… |
| 1.3.6.1.4.1.18.3.5.3.4.2.1.2 | ColumnwfUdpLocalPort | read-only | mandatory | The port value |
| 1.3.6.1.4.1.18.3.5.3.4.3 | NodewfUdpMpr | |||
| 1.3.6.1.4.1.18.3.5.3.4.3.1 | ScalarwfUdpMprCreate | read-write | mandatory | Create/Delete parameter for SIAC MPR. The default is created. |
| 1.3.6.1.4.1.18.3.5.3.4.3.2 | ScalarwfUdpMprEnable | read-write | mandatory | Enables/Disables router wide MPR functionality. |
| 1.3.6.1.4.1.18.3.5.3.4.3.3 | ScalarwfUdpMprStartPort | read-write | mandatory | Starting UDP port number for MPR address resolution. |
| 1.3.6.1.4.1.18.3.5.3.4.3.4 | ScalarwfUdpMprNumberOfPorts | read-write | mandatory | Max number of UDP ports in mapping table. |
| 1.3.6.1.4.1.18.3.5.3.4.3.5 | ScalarwfUdpMprStatisticsEnable | read-write | mandatory | Enable/Disable parameter for global MPR statistics collection. |
| 1.3.6.1.4.1.18.3.5.3.4.3.6 | ScalarwfUdpMprInPkts | read-only | mandatory | Total number of packets received by MPR |
| 1.3.6.1.4.1.18.3.5.3.4.3.7 | ScalarwfUdpMprOutPkts | read-only | mandatory | Total number of packets sent by MPR |
| 1.3.6.1.4.1.18.3.5.3.4.3.8 | ScalarwfUdpMprGenPkts | read-only | mandatory | Total number of packets generated by MPR. |
| 1.3.6.1.4.1.18.3.5.3.4.3.9 | ScalarwfUdpMprLookupDrops | read-only | mandatory | Total number of packets dropped due to mcast address lokup failure. |
| 1.3.6.1.4.1.18.3.5.3.4.3.10 | ScalarwfUdpMprDisableDrops | read-only | mandatory | Total number of packets dropped due to mapping entry being disabled. |
| 1.3.6.1.4.1.18.3.5.3.4.4 | TablewfUdpMprMappingTable | not-accessible | mandatory | The MPR Mapping table contains information regarding UDP port to IP multicast address resolution. |
| 1.3.6.1.4.1.18.3.5.3.4.4.1 | RowwfUdpMprMappingEntry | not-accessible | mandatory | A particular entry |
| 1.3.6.1.4.1.18.3.5.3.4.4.1.1 | ColumnwfUdpMprMapCreate | read-write | mandatory | Mapping entry create/delete attribute. |
| 1.3.6.1.4.1.18.3.5.3.4.4.1.2 | ColumnwfUdpMprMapEnable | read-write | mandatory | Mapping entry enable/disable attribute. |
| 1.3.6.1.4.1.18.3.5.3.4.4.1.3 | ColumnwfUdpMprMapPort | read-only | mandatory | The relative (relative to start port) port number of the MPR mapping entry. |
| 1.3.6.1.4.1.18.3.5.3.4.4.1.4 | ColumnwfUdpMprMapMcastAddr | read-write | mandatory | IP multicast address associated with this port. |
| 1.3.6.1.4.1.18.3.5.3.4.4.1.5 | ColumnwfUdpMprMapStatisticsEnable | read-write | mandatory | MPR mapping entry specific statistics collection enable/disable attribute. |
| 1.3.6.1.4.1.18.3.5.3.4.4.1.6 | ColumnwfUdpMprMapInPkts | read-only | mandatory | Total number of MPR packets received for this port. |
| 1.3.6.1.4.1.18.3.5.3.4.4.1.7 | ColumnwfUdpMprMapOutPkts | read-only | mandatory | Total number of MPR packets sent with this port number. |
| 1.3.6.1.4.1.18.3.5.3.4.4.1.8 | ColumnwfUdpMprMapGenPkts | read-only | mandatory | Total number of MPR packets generated by MPR with this port number. |
| 1.3.6.1.4.1.18.3.5.3.4.4.1.9 | ColumnwfUdpMprMapLookupDrops | read-only | mandatory | Total number of MPR packets dropped for this port because mcast address lookups failed. |
| 1.3.6.1.4.1.18.3.5.3.4.4.1.10 | ColumnwfUdpMprMapDisableDrops | read-only | mandatory | Total number of MPR packets dropped for this port because the mapping record is disabled. |