Wellfleet-IPPOLICY-MIB
415 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.6.1 | TablewfIpRipAcceptTable | not-accessible | mandatory | The Table of Rip Accept Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1 | RowwfIpRipAcceptEntry | not-accessible | mandatory | An entry in the Rip Accept Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.1 | ColumnwfIpRipAcceptDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.2 | ColumnwfIpRipAcceptDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.3 | ColumnwfIpRipAcceptIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.4 | ColumnwfIpRipAcceptName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.5 | ColumnwfIpRipAcceptNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.6 | ColumnwfIpRipAcceptAction | read-write | mandatory | action. 'accept' means that the route should be considered for inclusion in the routing table. 'ignore' means don't consider the route |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.7 | ColumnwfIpRipAcceptPreference | read-write | mandatory | preference. This is a metric to be used to compare the route to other routes to the same destination. A value of 16 is 'most preferred'. This parameter only ha… |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.8 | ColumnwfIpRipAcceptPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.9 | ColumnwfIpRipAcceptInject | read-only | mandatory | network injection list. this octet string should only be non-null if the action is 'accept' and if it is desired to insert networks into the routing table that… |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.10 | ColumnwfIpRipAcceptGateway | read-write | mandatory | RIP gateway list. This octet string contains the addresses of one or more routers that could send RIP updates to this router. If a router address is included i… |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.11 | ColumnwfIpRipAcceptInterface | read-write | mandatory | RIP interface list. This octet string contains the addresses of one or more interfaces on this router. If an interface address is included in this list, this f… |
| 1.3.6.1.4.1.18.3.5.3.2.6.1.1.12 | ColumnwfIpRipAcceptApplyMask | read-write | mandatory | Injection Mask: If the 'action' is accept and the actual received network will be considered, this is an optional IP address mask that will be applied to the n… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2 | TablewfIpRipAnnounceTable | not-accessible | mandatory | The Table of Rip Announce Route Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1 | RowwfIpRipAnnounceEntry | not-accessible | mandatory | An entry in the Rip Announce Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.1 | ColumnwfIpRipAnnounceDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.2 | ColumnwfIpRipAnnounceDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.3 | ColumnwfIpRipAnnounceIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.4 | ColumnwfIpRipAnnounceName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.5 | ColumnwfIpRipAnnounceNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.6 | ColumnwfIpRipAnnounceAction | read-write | mandatory | action. 'announce' means that the route should be advertised. 'ignore' means don't advertise the route. |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.7 | ColumnwfIpRipAnnouncePrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.8 | ColumnwfIpRipAnnounceRouteSource | read-write | mandatory | route source. This parameter can contain one or more route source identifiers. If the route source is in this bit map, then a route from that source that meets… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.9 | ColumnwfIpRipAnnounceExtRouteSource | read-write | mandatory | external route source. This parameter can contain one or more external route source identifiers. If the external route source is in this bit map, then a route … |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.10 | ColumnwfIpRipAnnounceAdvertise | read-write | mandatory | network advertisement list. this octet string should only be non-null if the action is 'announce' and if it is desired to advertise networks that differ from t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.11 | ColumnwfIpRipAnnounceRipGateway | read-write | mandatory | from RIP' gateway list. Only applicable for RIP sourced routes and if RIP is included as a route source. This octet string contains the addresses of one or mor… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.12 | ColumnwfIpRipAnnounceRipInterface | read-write | mandatory | from RIP' interface list. Only applicable for RIP sourced routes and if RIP is included as a route source. This octet string contains the addresses of one or m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.13 | ColumnwfIpRipAnnounceOspfRouterId | read-write | mandatory | from OSPF' Router ID list. Only applicable for OSPF sourced routes and if OSPF is included as a route source. This octet string contains the router IDs of one … |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.14 | ColumnwfIpRipAnnounceOspfType | read-write | mandatory | from OSPF' route type. Only applicable for OSPF sourced routes and if OSPF is included as a route source. This parameter describes which types of OSPF routes m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.15 | ColumnwfIpRipAnnounceOspfTag | read-write | mandatory | from OSPF' ASE tag list. Only applicable for OSPF sourced ASE routes and if OSPF is included as a route source. This octet string contains tag values that coul… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.16 | ColumnwfIpRipAnnounceEgpPeer | read-write | mandatory | from EGP' Peer list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains the IP address of one or more … |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.17 | ColumnwfIpRipAnnounceEgpPeerAs | read-write | mandatory | from EGP' Peer AS list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains Autonomous System Numbers. … |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.18 | ColumnwfIpRipAnnounceEgpGateway | read-write | mandatory | from EGP' Gateway list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains the IP address of one or mo… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.19 | ColumnwfIpRipAnnounceBgpPeer | read-write | mandatory | from BGP' Peer list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains the IP address of one or more … |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.20 | ColumnwfIpRipAnnounceBgpPeerAs | read-write | mandatory | from BGP' AS list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains Autonomous System Numbers. If an… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.21 | ColumnwfIpRipAnnounceBgpNextHop | read-write | mandatory | from BGP' NextHop list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains IP addresses. If an IP addr… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.22 | ColumnwfIpRipAnnounceInterface | read-write | mandatory | RIP outbound interface list. This is a list of outgoing RIP interfaces. If an interface appears in this list, the filter applies to RIP advertisements sent via… |
| 1.3.6.1.4.1.18.3.5.3.2.6.2.1.23 | ColumnwfIpRipAnnounceRipMetric | read-write | mandatory | RIP metric. Only valid if the action is 'propagate'. This is an optional export metric to use when advertising a route that matches this filter. If zero, the r… |
| 1.3.6.1.4.1.18.3.5.3.2.6.3 | TablewfIpOspfAcceptTable | not-accessible | mandatory | The Table of OSPF Accept Route Filter Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1 | RowwfIpOspfAcceptEntry | not-accessible | mandatory | An entry in the OSPF Accept Route Policy Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.1 | ColumnwfIpOspfAcceptDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.2 | ColumnwfIpOspfAcceptDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.3 | ColumnwfIpOspfAcceptIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.4 | ColumnwfIpOspfAcceptName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.5 | ColumnwfIpOspfAcceptNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.6 | ColumnwfIpOspfAcceptAction | read-write | mandatory | action. 'accept' means that the route should be considered for inclusion in the routing table. 'ignore' means don't consider the route |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.7 | ColumnwfIpOspfAcceptPreference | read-write | mandatory | preference. This is a metric to be used to compare the route to other routes to the same destination. A value of 16 is 'most preferred'. This parameter only ha… |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.8 | ColumnwfIpOspfAcceptPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.9 | ColumnwfIpOspfAcceptInject | read-only | mandatory | network injection list. this octet string should only be non-null if the action is 'accept' and if it is desired to insert networks into the routing table that… |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.10 | ColumnwfIpOspfAcceptType | read-write | mandatory | OSPF ASE type. This parameter describes which types of OSPF ASE routes match this filter. 'any' means 'match either ASE type 1 or 2'. 'type1' means 'match any … |
| 1.3.6.1.4.1.18.3.5.3.2.6.3.1.11 | ColumnwfIpOspfAcceptTag | read-write | mandatory | OSPF ASE tag list. This octet string contains tag values that could be present in an OSPF ASE advertisement. If a tag value is included in this list, this filt… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4 | TablewfIpOspfAnnounceTable | not-accessible | mandatory | The Table of OSPF Announce Route Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1 | RowwfIpOspfAnnounceEntry | not-accessible | mandatory | An entry in the OSPF Announce Route Filter Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.1 | ColumnwfIpOspfAnnounceDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.2 | ColumnwfIpOspfAnnounceDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.3 | ColumnwfIpOspfAnnounceIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.4 | ColumnwfIpOspfAnnounceName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.5 | ColumnwfIpOspfAnnounceNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.6 | ColumnwfIpOspfAnnounceAction | read-write | mandatory | action. 'announce' means that the route should be advertised. 'ignore' means don't advertise the route. |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.7 | ColumnwfIpOspfAnnouncePrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.8 | ColumnwfIpOspfAnnounceRouteSource | read-write | mandatory | route source. This parameter can contain one or more route source identifiers. If the route source is in this bit map, then a route from that source that meets… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.9 | ColumnwfIpOspfAnnounceExtRouteSource | read-only | mandatory | external route source. This parameter can contain one or more external route source identifiers. If the external route source is in this bit map, then a route … |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.10 | ColumnwfIpOspfAnnounceAdvertise | read-write | mandatory | network advertisement list. this octet string should only be non-null if the action is 'announce' and if it is desired to advertise networks that differ from t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.11 | ColumnwfIpOspfAnnounceRipGateway | read-write | mandatory | from RIP' gateway list. Only applicable for RIP sourced routes and if RIP is included as a route source. This octet string contains the addresses of one or mor… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.12 | ColumnwfIpOspfAnnounceRipInterface | read-write | mandatory | from RIP' interface list. Only applicable for RIP sourced routes and if RIP is included as a route source. This octet string contains the addresses of one or m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.13 | ColumnwfIpOspfAnnounceOspfRouterId | read-write | mandatory | from OSPF' Router ID list. Only applicable for OSPF sourced routes and if OSPF is included as a route source. This octet string contains the router IDs of one … |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.14 | ColumnwfIpOspfAnnounceOspfType | read-write | mandatory | from OSPF' route type. Only applicable for OSPF sourced routes and if OSPF is included as a route source. This parameter describes which types of OSPF routes m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.15 | ColumnwfIpOspfAnnounceOspfTag | read-write | mandatory | from OSPF' ASE tag list. Only applicable for OSPF sourced ASE routes and if OSPF is included as a route source. This octet string contains tag values that coul… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.16 | ColumnwfIpOspfAnnounceEgpPeer | read-write | mandatory | from EGP' Peer list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains the IP address of one or more … |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.17 | ColumnwfIpOspfAnnounceEgpPeerAs | read-write | mandatory | from EGP' Peer AS list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains Autonomous System Numbers. … |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.18 | ColumnwfIpOspfAnnounceEgpGateway | read-write | mandatory | from EGP' Gateway list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains the IP address of one or mo… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.19 | ColumnwfIpOspfAnnounceBgpPeer | read-write | mandatory | from BGP' Peer list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains the IP address of one or more … |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.20 | ColumnwfIpOspfAnnounceBgpPeerAs | read-write | mandatory | from BGP' AS list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains Autonomous System Numbers. If an… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.21 | ColumnwfIpOspfAnnounceBgpNextHop | read-write | mandatory | from BGP' NextHop list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains IP addresses. If an IP addr… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.22 | ColumnwfIpOspfAnnounceType | read-write | mandatory | OSPF ASE type. The ASE type to use for routes that match this filter. This is only applicable if the action is 'accept'. A zero value means to use the default … |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.23 | ColumnwfIpOspfAnnounceTag | read-write | mandatory | OSPF ASE tag. The ASE tag value to use for routes that match this filter. This is only applicable if the action is 'accept' and autotag is set to 'disable'. |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.24 | ColumnwfIpOspfAnnounceAutoTag | read-write | mandatory | BGP/OSPF automatic tag generation: Only applicable if action is 'announce'. if set to 'disabled', the value in wfIpOspfAnnounceTag will be used for a tag. If s… |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.25 | ColumnwfIpOspfAnnounceMetric | read-write | mandatory | The optional metric to apply to this route. Zero means : use the route's actual cost. Only valid for propagate. |
| 1.3.6.1.4.1.18.3.5.3.2.6.4.1.26 | ColumnwfIpOspfAnnounceNssaPropagate | read-write | mandatory | Indicates whether or not the P-bit will be set in the Type-7 LSA of this route. If P-bit is set, the Type-7 LSA is translated into a Type-5 LSA and the Type-5 … |
| 1.3.6.1.4.1.18.3.5.3.2.6.5 | TablewfIpEgpAcceptTable | not-accessible | mandatory | The Table of EGP Accept Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1 | RowwfIpEgpAcceptEntry | not-accessible | mandatory | An entry in the Egp Accept Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.1 | ColumnwfIpEgpAcceptDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.2 | ColumnwfIpEgpAcceptDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.3 | ColumnwfIpEgpAcceptIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.4 | ColumnwfIpEgpAcceptName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.5 | ColumnwfIpEgpAcceptNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.6 | ColumnwfIpEgpAcceptAction | read-write | mandatory | action. 'accept' means that the route should be considered for inclusion in the routing table. 'ignore' means don't consider the route |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.7 | ColumnwfIpEgpAcceptPreference | read-write | mandatory | preference. This is a metric to be used to compare the route to other routes to the same destination. A value of 16 is 'most preferred'. This parameter only ha… |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.8 | ColumnwfIpEgpAcceptPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.9 | ColumnwfIpEgpAcceptInject | read-only | mandatory | network injection list. this octet string should only be non-null if the action is 'accept' and if it is desired to insert networks into the routing table that… |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.10 | ColumnwfIpEgpAcceptPeer | read-write | mandatory | EGP Peer list. This octet string contains the IP addresses of one or more EGP peers. If a peer address appears in this list, this filter applies to EGP adverti… |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.11 | ColumnwfIpEgpAcceptAs | read-write | mandatory | EGP Peer AS list. This octet string contains Autonomous System numbers. If an AS appears in this list, this filter applies to EGP advertisements from peers in … |
| 1.3.6.1.4.1.18.3.5.3.2.6.5.1.12 | ColumnwfIpEgpAcceptGateway | read-write | mandatory | EGP gateway list. This octet string contains the IP address of one or more EGP gateways. If an EGP gateway is included in this list, this filter applies to EGP… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6 | TablewfIpEgpAnnounceTable | not-accessible | mandatory | The Table of Egp Announce Route Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1 | RowwfIpEgpAnnounceEntry | not-accessible | mandatory | An entry in the Egp Announce Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.1 | ColumnwfIpEgpAnnounceDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.2 | ColumnwfIpEgpAnnounceDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.3 | ColumnwfIpEgpAnnounceIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.4 | ColumnwfIpEgpAnnounceName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.5 | ColumnwfIpEgpAnnounceNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.6 | ColumnwfIpEgpAnnounceAction | read-write | mandatory | action. 'announce' means that the route should be advertised. 'ignore' means don't advertise the route. |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.7 | ColumnwfIpEgpAnnouncePrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.8 | ColumnwfIpEgpAnnounceRouteSource | read-write | mandatory | route source. This parameter can contain one or more route source identifiers. If the route source is in this bit map, then a route from that source that meets… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.9 | ColumnwfIpEgpAnnounceExtRouteSource | read-write | mandatory | external route source. This parameter can contain one or more external route source identifiers. If the external route source is in this bit map, then a route … |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.10 | ColumnwfIpEgpAnnounceAdvertise | read-write | mandatory | network advertisement list. this octet string should only be non-null if the action is 'announce' and if it is desired to advertise networks that differ from t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.11 | ColumnwfIpEgpAnnounceRipGateway | read-write | mandatory | from RIP' gateway list. Only applicable for RIP sourced routes and if RIP is included as a route source. This octet string contains the addresses of one or mor… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.12 | ColumnwfIpEgpAnnounceRipInterface | read-write | mandatory | from RIP' interface list. Only applicable for RIP sourced routes and if RIP is included as a route source. This octet string contains the addresses of one or m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.13 | ColumnwfIpEgpAnnounceOspfRouterId | read-write | mandatory | from OSPF' Router ID list. Only applicable for OSPF sourced routes and if OSPF is included as a route source. This octet string contains the router IDs of one … |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.14 | ColumnwfIpEgpAnnounceOspfType | read-write | mandatory | from OSPF' route type. Only applicable for OSPF sourced routes and if OSPF is included as a route source. This parameter describes which types of OSPF routes m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.15 | ColumnwfIpEgpAnnounceOspfTag | read-write | mandatory | from OSPF' ASE tag list. Only applicable for OSPF sourced ASE routes and if OSPF is included as a route source. This octet string contains tag values that coul… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.16 | ColumnwfIpEgpAnnounceEgpPeer | read-write | mandatory | from EGP' Peer list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains the IP address of one or more … |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.17 | ColumnwfIpEgpAnnounceEgpPeerAs | read-write | mandatory | from EGP' Peer AS list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains Autonomous System Numbers. … |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.18 | ColumnwfIpEgpAnnounceEgpGateway | read-write | mandatory | from EGP' Gateway list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains the IP address of one or mo… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.19 | ColumnwfIpEgpAnnounceBgpPeer | read-write | mandatory | from BGP' Peer list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains the IP address of one or more … |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.20 | ColumnwfIpEgpAnnounceBgpPeerAs | read-write | mandatory | from BGP' AS list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains Autonomous System Numbers. If an… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.21 | ColumnwfIpEgpAnnounceBgpNextHop | read-write | mandatory | from BGP' NextHop list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains IP addresses. If an IP addr… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.22 | ColumnwfIpEgpAnnouncePeer | read-write | mandatory | EGP outbound peer list. This is a list of IP addresses of EGP peers. If a peer appears in this list, the filter applies to EGP advertisements sent to that peer… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.23 | ColumnwfIpEgpAnnounceInterface | read-write | mandatory | EGP outbound interface list. This is a list of outgoing interfaces. If an interface appears in this list, the filter applies to EGP advertisements sent via tha… |
| 1.3.6.1.4.1.18.3.5.3.2.6.6.1.24 | ColumnwfIpEgpAnnounceMetric | read-write | mandatory | EGP metric. Only valid if the action is 'propagate'. This is an optional export metric to use when advertising a route that matches this filter. If zero, the r… |
| 1.3.6.1.4.1.18.3.5.3.2.6.7 | TablewfIpBgp3AcceptTable | not-accessible | mandatory | The table of BGP-3 Accept Route Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1 | RowwfIpBgp3AcceptEntry | not-accessible | mandatory | An entry in the BGP-3 Accept Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.1 | ColumnwfIpBgp3AcceptDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.2 | ColumnwfIpBgp3AcceptDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.3 | ColumnwfIpBgp3AcceptIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.4 | ColumnwfIpBgp3AcceptName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.5 | ColumnwfIpBgp3AcceptNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.6 | ColumnwfIpBgp3AcceptAction | read-write | mandatory | action. 'accept' means that the route should be considered for inclusion in the routing table. 'ignore' means don't consider the route |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.7 | ColumnwfIpBgp3AcceptPreference | read-write | mandatory | preference. This is a metric to be used to compare the route to other routes to the same destination. A value of 16 is 'most preferred'. This parameter only ha… |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.8 | ColumnwfIpBgp3AcceptPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.9 | ColumnwfIpBgp3AcceptInject | read-write | mandatory | network injection list. this octet string should only be non-null if the action is 'accept' and if it is desired to insert networks into the routing table that… |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.10 | ColumnwfIpBgp3AcceptPeerAs | read-write | mandatory | BGP-3 Peer AS list. This octet string contains Autonomous System numbers. If an AS appears in this list, this filter applies to BGP advertisements from peers i… |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.11 | ColumnwfIpBgp3AcceptPeerAddress | read-write | mandatory | BGP-3 Peer list. This octet string contains the IP addresses of one or more BGP peers. If a peer address appears in this list, this filter applies to BGP adver… |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.12 | ColumnwfIpBgp3AcceptOrigAs | read-write | mandatory | BGP-3 Originating AS list. This octet string contains Autonomous System numbers. If an AS appears in this list, this filter applies to BGP advertisements that … |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.13 | ColumnwfIpBgp3AcceptRouteOrigin | read-write | mandatory | BGP-3 ORIGIN path attribute. This is a bit map of the three possible origin types: IGP, EGP, and Incomplete. If the bit for a particular origin type is on, thi… |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.14 | ColumnwfIpBgp3AcceptBgp3Preference | read-write | mandatory | BGP-3 preference. For routes that match this filter, this value is used for comparison against other BGP-3 routes. A larger value is more preferred. Only valid… |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.15 | ColumnwfIpBgp3AcceptAsWeightClass | read-write | mandatory | BGP AS Weight Class. For routes that match this filter, this value indicates which weight values should be used when calculating the AS path weight (see the AS… |
| 1.3.6.1.4.1.18.3.5.3.2.6.7.1.16 | ColumnwfIpBgp3AcceptCommunityMatch | read-write | mandatory | BGP Community list. This list identifies which attributes will match this rule. The octet string is a list of communities. Each community is 4 bytes long. If t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8 | TablewfIpBgp3AnnounceTable | not-accessible | mandatory | The table of BGP-3 Announce Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1 | RowwfIpBgp3AnnounceEntry | not-accessible | mandatory | An entry in the BGP-3 Announce Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.1 | ColumnwfIpBgp3AnnounceDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.2 | ColumnwfIpBgp3AnnounceDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.3 | ColumnwfIpBgp3AnnounceIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.4 | ColumnwfIpBgp3AnnounceName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.5 | ColumnwfIpBgp3AnnounceNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.6 | ColumnwfIpBgp3AnnounceAction | read-write | mandatory | action. 'announce' means that the route should be advertised. 'ignore' means don't advertise the route. |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.7 | ColumnwfIpBgp3AnnouncePrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.8 | ColumnwfIpBgp3AnnounceRouteSource | read-write | mandatory | route source. This parameter can contain one or more route source identifiers. If the route source is in this bit map, then a route from that source that meets… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.9 | ColumnwfIpBgp3AnnounceExtRouteSource | read-write | mandatory | external route source. This parameter can contain one or more external route source identifiers. If the external route source is in this bit map, then a route … |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.10 | ColumnwfIpBgp3AnnounceAdvertise | read-write | mandatory | network advertisement list. this octet string should only be non-null if the action is 'announce' and if it is desired to advertise networks that differ from t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.11 | ColumnwfIpBgp3AnnounceRipGateway | read-write | mandatory | from RIP' gateway list. Only applicable for RIP sourced routes and if RIP is included as a route source. This octet string contains the addresses of one or mor… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.12 | ColumnwfIpBgp3AnnounceRipInterface | read-write | mandatory | from RIP' interface list. Only applicable for RIP sourced routes and if RIP is included as a route source. This octet string contains the addresses of one or m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.13 | ColumnwfIpBgp3AnnounceOspfRouterId | read-write | mandatory | from OSPF' Router ID list. Only applicable for OSPF sourced routes and if OSPF is included as a route source. This octet string contains the router IDs of one … |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.14 | ColumnwfIpBgp3AnnounceOspfType | read-write | mandatory | from OSPF' route type. Only applicable for OSPF sourced routes and if OSPF is included as a route source. This parameter describes which types of OSPF routes m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.15 | ColumnwfIpBgp3AnnounceOspfTag | read-write | mandatory | from OSPF' ASE tag list. Only applicable for OSPF sourced ASE routes and if OSPF is included as a route source. This octet string contains tag values that coul… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.16 | ColumnwfIpBgp3AnnounceEgpPeer | read-write | mandatory | from EGP' Peer list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains the IP address of one or more … |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.17 | ColumnwfIpBgp3AnnounceEgpPeerAs | read-write | mandatory | from EGP' Peer AS list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains Autonomous System Numbers. … |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.18 | ColumnwfIpBgp3AnnounceEgpGateway | read-write | mandatory | from EGP' Gateway list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains the IP address of one or mo… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.19 | ColumnwfIpBgp3AnnounceBgpPeer | read-write | mandatory | from BGP' Peer list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains the IP address of one or more … |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.20 | ColumnwfIpBgp3AnnounceBgpPeerAs | read-write | mandatory | from BGP' AS list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains Autonomous System Numbers. If an… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.21 | ColumnwfIpBgp3AnnounceBgpNextHop | read-write | mandatory | from BGP' NextHop list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains IP addresses. If an IP addr… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.22 | ColumnwfIpBgp3AnnouncePeerAs | read-write | mandatory | BGP-3 Outbound Peer AS list. This octet string contains Autonomous System Numbers. If an AS number is included in this list, this filter applies to BGP adverti… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.23 | ColumnwfIpBgp3AnnouncePeer | read-write | mandatory | BGP-3 Outbound Peer list. This octet string contains the IP address of one or more BGP peers. If a BGP peer is included in this list, this filter applies to BG… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.24 | ColumnwfIpBgp3AnnounceUseMetric | read-write | mandatory | Inter-AS Metric Selector. This parameter indicates whether or not an INTER_AS_METRIC will be advertised for a network matching this filter and, if advertised, … |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.25 | ColumnwfIpBgp3AnnounceInterAsMetric | read-write | mandatory | Specific Inter-AS Metric. If wfIpBgp3AnnounceUseMetric is set to 'specified', this is the value that will be used for the INTER_AS_METRIC. Only valid if 'actio… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.26 | ColumnwfIpBgp3AnnounceOrigin | read-write | mandatory | ORIGIN attribute override. If non-null, the ORIGIN attribute of a route matching this filter will be replaced with the indicated value. Only valid if 'action' … |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.27 | ColumnwfIpBgp3AnnounceAsPath | read-write | mandatory | AS-path override. If non-null, the AS_PATH attribute of a route matching this filter will be replaced with the indicated AS path. Each element of the AS path i… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.28 | ColumnwfIpBgp3AnnounceNextHop | read-write | mandatory | Announce Next Hop. If action is ANNOUNCE and this instance is non-zero, then overwrite Next Hop with specified value. |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.29 | ColumnwfIpBgp3AnnounceCommunity | read-write | mandatory | BGP Community list. This identifies which communities will be associated with this rule. If non-null, the octet string contains one or more 4-octet BGP Communi… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.30 | ColumnwfIpBgp3AnnounceCommunityAction | read-write | mandatory | Action 'as-is' means that existing BGP Community attribute is unchanged. 'remove' - all BGP Communities are removed from an update. 'append' - existing BGP Com… |
| 1.3.6.1.4.1.18.3.5.3.2.6.8.1.31 | ColumnwfIpBgp3AnnounceCommunityMatch | read-write | mandatory | BGP Community list. This list identifies which attributes will match this rule. The octet string is a list of communities. Each community is 4 bytes long. If t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9 | TablewfIpBgp4AcceptTable | not-accessible | mandatory | The table of BGP-4 Accept Route Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1 | RowwfIpBgp4AcceptEntry | not-accessible | mandatory | An entry in the BGP-4 Accept Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.1 | ColumnwfIpBgp4AcceptDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.2 | ColumnwfIpBgp4AcceptDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.3 | ColumnwfIpBgp4AcceptIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.4 | ColumnwfIpBgp4AcceptName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.5 | ColumnwfIpBgp4AcceptNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.6 | ColumnwfIpBgp4AcceptAction | read-write | mandatory | action. 'accept' means that the route should be considered for inclusion in the routing table. 'ignore' means don't consider the route |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.7 | ColumnwfIpBgp4AcceptPreference | read-write | mandatory | preference. This is a metric to be used to compare the route to other routes to the same destination. A value of 16 is 'most preferred'. This parameter only ha… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.8 | ColumnwfIpBgp4AcceptPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.9 | ColumnwfIpBgp4AcceptInject | read-write | mandatory | network injection list. this octet string should only be non-null if the action is 'accept' and if it is desired to insert networks into the routing table that… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.10 | ColumnwfIpBgp4AcceptPeerAs | read-write | mandatory | BGP-4 Peer AS list. This octet string contains Autonomous System numbers. If an AS appears in this list, this filter applies to BGP advertisements from peers i… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.11 | ColumnwfIpBgp4AcceptPeerAddress | read-write | mandatory | BGP-4 Peer list. This octet string contains the IP addresses of one or more BGP peers. If a peer address appears in this list, this filter applies to BGP adver… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.12 | ColumnwfIpBgp4AcceptOrigAs | read-write | mandatory | BGP-4 Originating AS list. This octet string contains Autonomous System numbers. If an AS appears in this list, this filter applies to BGP advertisements that … |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.13 | ColumnwfIpBgp4AcceptRouteOrigin | read-write | mandatory | BGP-4 ORIGIN path attribute. This is a bit map of the three possible origin types: IGP, EGP, and Incomplete. If the bit for a particular origin type is on, thi… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.14 | ColumnwfIpBgp4AcceptAggrAs | read-write | mandatory | BGP-4 Aggregator AS list. This octet string contains Autonomous System numbers. If an AS appears in this list, this filter applies to BGP advertisements that c… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.15 | ColumnwfIpBgp4AcceptAggrRouter | read-write | mandatory | BGP-4 Aggregator Router list. This octet string contains the IP addresses of one or more BGP routers. If a router address appears in this list, this filter app… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.16 | ColumnwfIpBgp4AcceptLocalPref | read-write | mandatory | BGP-4 Local Preference override. If non-null, any route matching this filter takes is assigned a local preference of the indicated value. This is used to overr… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.17 | ColumnwfIpBgp4AcceptBgp4Preference | read-write | mandatory | BGP-4 preference. For routes that match this filter, this value is used for comparison against other BGP-4 routes. A larger value is more preferred. Only valid… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.18 | ColumnwfIpBgp4AcceptAsWeightClass | read-write | mandatory | BGP AS Weight Class. For routes that match this filter, this value indicates which weight values should be used when calculating the AS path weight (see the AS… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.19 | ColumnwfIpBgp4AcceptAsPatternMatch | read-write | mandatory | BGP AS_PATH Pattern Match string. This filter applies to BGP AS_PATH attribute and only routes which as_path matches the pattern string will be accepted. A pat… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.20 | ColumnwfIpBgp4AcceptCommunityMatch | read-write | mandatory | BGP Community list. This list identifies which attributes will match this rule. The octet string is a list of communities. Each community is 4 bytes long. If t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.21 | ColumnwfIpBgp4AcceptUseMultiExitDisc | read-write | mandatory | Multi-Exit Discriminator Selector. This parameter indicates whether or not a MULTI_EXIT_DISC will be accepted for a network matching this filter and, if accept… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.22 | ColumnwfIpBgp4AcceptMultiExitDisc | read-write | mandatory | Specific Multi-Exit Discriminator. If wfIpBgp4AcceptUseMultiExitDisc is set to 'override' or 'Generate' and there is MED present, this is the value that will b… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.23 | ColumnwfIpBgp4AcceptAsPrepend | read-write | mandatory | AS Prepend. This octet string contains AS numbers to be added as a SEQUENCE to AS Path. |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.24 | ColumnwfIpBgp4AcceptCommunity | read-write | mandatory | BGP Community list. This identifies which communities will be associated with this rule. If non-null, the octet string contains one or more 4-octet BGP Communi… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.25 | ColumnwfIpBgp4AcceptCommunityAction | read-write | mandatory | Action 'as-is' means that existing BGP Community attribute is unchanged. 'remove' - all BGP Communities are removed from an update. 'append' - existing BGP Com… |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.26 | ColumnwfIpBgp4AcceptRFDampeningEnable | read-write | mandatory | Enables or disables Route Flap Dampening. Route flap dampeni ng applies only to EBGP learnt routes. |
| 1.3.6.1.4.1.18.3.5.3.2.6.9.1.27 | ColumnwfIpBgp4AcceptRFDampeningTemplate | read-write | mandatory | If Route Flap Dampening enabled, it will use this value to index into the wfBgpRouteFlapTemplate table. The default value of 1, points to the Default Template |
| 1.3.6.1.4.1.18.3.5.3.2.6.10 | TablewfIpBgp4AnnounceTable | not-accessible | mandatory | The table of BGP-4 Announce Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1 | RowwfIpBgp4AnnounceEntry | not-accessible | mandatory | An entry in the BGP-4 Announce Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.1 | ColumnwfIpBgp4AnnounceDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.2 | ColumnwfIpBgp4AnnounceDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.3 | ColumnwfIpBgp4AnnounceIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.4 | ColumnwfIpBgp4AnnounceName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.5 | ColumnwfIpBgp4AnnounceNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.6 | ColumnwfIpBgp4AnnounceAction | read-write | mandatory | action. 'announce' means that the route should be advertised. 'ignore' means don't advertise the route. |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.7 | ColumnwfIpBgp4AnnouncePrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.8 | ColumnwfIpBgp4AnnounceRouteSource | read-write | mandatory | route source. This parameter can contain one or more route source identifiers. If the route source is in this bit map, then a route from that source that meets… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.9 | ColumnwfIpBgp4AnnounceExtRouteSource | read-write | mandatory | external route source. This parameter can contain one or more external route source identifiers. If the external route source is in this bit map, then a route … |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.10 | ColumnwfIpBgp4AnnounceAdvertise | read-write | mandatory | network advertisement list. this octet string should only be non-null if the action is 'announce' and if it is desired to advertise networks that differ from t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.11 | ColumnwfIpBgp4AnnounceRipGateway | read-write | mandatory | from RIP' gateway list. Only applicable for RIP sourced routes and if RIP is included as a route source. This octet string contains the addresses of one or mor… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.12 | ColumnwfIpBgp4AnnounceRipInterface | read-write | mandatory | from RIP' interface list. Only applicable for RIP sourced routes and if RIP is included as a route source. This octet string contains the addresses of one or m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.13 | ColumnwfIpBgp4AnnounceOspfRouterId | read-write | mandatory | from OSPF' Router ID list. Only applicable for OSPF sourced routes and if OSPF is included as a route source. This octet string contains the router IDs of one … |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.14 | ColumnwfIpBgp4AnnounceOspfType | read-write | mandatory | from OSPF' route type. Only applicable for OSPF sourced routes and if OSPF is included as a route source. This parameter describes which types of OSPF routes m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.15 | ColumnwfIpBgp4AnnounceOspfTag | read-write | mandatory | from OSPF' ASE tag list. Only applicable for OSPF sourced ASE routes and if OSPF is included as a route source. This octet string contains tag values that coul… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.16 | ColumnwfIpBgp4AnnounceEgpPeer | read-write | mandatory | from EGP' Peer list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains the IP address of one or more … |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.17 | ColumnwfIpBgp4AnnounceEgpPeerAs | read-write | mandatory | from EGP' Peer AS list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains Autonomous System Numbers. … |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.18 | ColumnwfIpBgp4AnnounceEgpGateway | read-write | mandatory | from EGP' Gateway list. Only applicable for EGP sourced routes and if EGP is included as a route source. This octet string contains the IP address of one or mo… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.19 | ColumnwfIpBgp4AnnounceBgpPeer | read-write | mandatory | from BGP' Peer list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains the IP address of one or more … |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.20 | ColumnwfIpBgp4AnnounceBgpPeerAs | read-write | mandatory | from BGP' AS list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains Autonomous System Numbers. If an… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.21 | ColumnwfIpBgp4AnnounceBgpNextHop | read-write | mandatory | from BGP' NextHop list. Only applicable for BGP sourced routes and if BGP is included as a route source. This octet string contains IP addresses. If an IP addr… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.22 | ColumnwfIpBgp4AnnouncePeerAs | read-write | mandatory | BGP-4 Outbound Peer AS list. This octet string contains Autonomous System Numbers. If an AS number is included in this list, this filter applies to BGP adverti… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.23 | ColumnwfIpBgp4AnnouncePeer | read-write | mandatory | BGP-4 Outbound Peer list. This octet string contains the IP address of one or more BGP peers. If a BGP peer is included in this list, this filter applies to BG… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.24 | ColumnwfIpBgp4AnnounceUseMultiExitDisc | read-write | mandatory | Multi-Exit Discriminator Selector. This parameter indicates whether or not a MULTI_EXIT_DISC will be advertised for a network matching this filter and, if adve… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.25 | ColumnwfIpBgp4AnnounceMultiExitDisc | read-write | mandatory | Specific Multi-Exit Discriminator. If wfIpBgp4AnnounceUseMultiExitDisc is set to 'specified', this is the value that will be used for the MULTI_EXIT_DISC. Only… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.26 | ColumnwfIpBgp4AnnounceOrigin | read-write | mandatory | ORIGIN attribute override. If non-null, the ORIGIN attribute of a route matching this filter will be replaced with the indicated value. Only valid if 'action' … |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.27 | ColumnwfIpBgp4AnnounceAsPath | read-write | mandatory | AS-path override. If non-null, the AS_PATH attribute of a route matching this filter will be replaced with the indicated AS path. A BGP-4 AS_PATH is composed o… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.28 | ColumnwfIpBgp4AnnounceLocalPrefOverride | read-write | mandatory | local pref override. Only valid when advertise to an IBGP peer. If this is false, the route weight value will be used to calculate the LOCAL_PREF path attribut… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.29 | ColumnwfIpBgp4AnnounceLocalPref | read-write | mandatory | local pref override value. Only valid when advertise to an IBGP peer. and if wfIpBgp4AnnounceLocalPrefOverride is set to IP_BGP4_ANNOUNCE_LOCAL_PREF_OVERRIDE_T… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.30 | ColumnwfIpBgp4AnnounceNextHop | read-write | mandatory | Announce Next Hop. If action is ANNOUNCE and this instance is non-zero, then overwrite Next Hop with specified value. |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.31 | ColumnwfIpBgp4AnnounceAtomic | read-write | mandatory | Announce Atomic aggregation |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.32 | ColumnwfIpBgp4AnnounceAsPatternMatch | read-write | mandatory | BGP AS_PATH Pattern Match string. This filter applies to BGP AS_PATH attribute and only routes which as_path matches the pattern string will be announced. A pa… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.33 | ColumnwfIpBgp4AnnounceCommunity | read-write | mandatory | BGP Community list. This identifies which communities will be associated with this rule. If non-null, the octet string contains one or more 4-octet BGP Communi… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.34 | ColumnwfIpBgp4AnnounceCommunityAction | read-write | mandatory | Action 'as-is' means that existing BGP Community attribute is unchanged. 'remove' - all BGP Communities are removed from an update. 'append' - existing BGP Com… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.35 | ColumnwfIpBgp4AnnounceCommunityMatch | read-write | mandatory | BGP Community list. This list identifies which attributes will match this rule. The octet string is a list of communities. Each community is 4 bytes long. If t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.10.1.36 | ColumnwfIpBgp4AnnounceAsPrepend | read-write | mandatory | AS numbers list.This octet string contains AS numbers to be added as a SEQUENCE to AS Path. |
| 1.3.6.1.4.1.18.3.5.3.2.6.11 | TablewfIpIgmpGroupPolicyTable | not-accessible | mandatory | The Table of IGMP Group Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1 | RowwfIpIgmpGroupPolicyEntry | not-accessible | mandatory | An entry in the IGMP Group Policy Table. |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.1 | ColumnwfIpIgmpGroupPolicyDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.2 | ColumnwfIpIgmpGroupPolicyDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.3 | ColumnwfIpIgmpGroupPolicyIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.4 | ColumnwfIpIgmpGroupPolicyName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.5 | ColumnwfIpIgmpGroupPolicySources | read-write | mandatory | Source identification list. This identifies which sources will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: first… |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.6 | ColumnwfIpIgmpGroupPolicyAction | read-write | mandatory | action. 'accept' means that the group join should be accepted. 'ignore' means to ignore the group join |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.7 | ColumnwfIpIgmpGroupPolicyPreference | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.8 | ColumnwfIpIgmpGroupPolicyPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.9 | ColumnwfIpIgmpGroupPolicyInject | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.10 | ColumnwfIpIgmpGroupPolicyGroups | read-write | mandatory | Group list. This identifies which groups will match this rule. If non-null, The octet string contains one or more 2-tuples of this form: next 4 octets: group n… |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.11 | ColumnwfIpIgmpGroupPolicyCircuits | read-write | mandatory | Circuit identification list. This identifies which circuits will match this rule. If non-null, The octet string contains one or more 2-octet, each representing… |
| 1.3.6.1.4.1.18.3.5.3.2.6.11.1.12 | ColumnwfIpIgmpGroupPolicySenders | read-write | mandatory | Sender identification list. This identifies which senders will match this rule. If non-null, The octet string contains one or more 2-tuples of this form: first… |
| 1.3.6.1.4.1.18.3.5.3.2.6.12 | TablewfMTMStaticFwdTable | not-accessible | obsolete | The Table of static forwarding entries |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1 | RowwfMTMStaticFwdEntry | not-accessible | obsolete | An entry in the static forwarding Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.1 | ColumnwfMTMStaticFwdDelete | read-write | obsolete | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.2 | ColumnwfMTMStaticFwdDisable | read-write | obsolete | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.3 | ColumnwfMTMStaticFwdIndex | read-only | obsolete | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.4 | ColumnwfMTMStaticFwdName | read-write | obsolete | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.5 | ColumnwfMTMStaticFwdGroups | read-write | obsolete | Group list. This identifies which groups will match this rule. If non-null, The octet string contains one or more 2-tuples of this form: next 4 octets: group n… |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.6 | ColumnwfMTMStaticFwdAction | read-only | obsolete | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.7 | ColumnwfMTMStaticFwdPreference | read-write | obsolete | If not 0, indicates this policy overwrites multicast protocols otherwise it can be overwritten by multicast protocols. If it overwrites protocols, then forward… |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.8 | ColumnwfMTMStaticFwdPrecedence | read-write | obsolete | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.9 | ColumnwfMTMStaticFwdInject | read-only | obsolete | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.10 | ColumnwfMTMStaticFwdSources | read-write | obsolete | Source identification list. This identifies which sources will match this rule. If non-null, The octet string contains one or more 2-tuples of this form: next … |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.11 | ColumnwfMTMStaticFwdInCircuits | read-write | obsolete | Inbound ircuit ist. This is not a selection criteria. If non-null, The octet string contains one or more 2-octet, each representing a circuit on which mulicast… |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.12 | ColumnwfMTMStaticFwdOutCircuits | read-write | obsolete | Outbound circuit list. This is not a selection criteria. If non-null, The octet string contains one or more 2-tuple, each representing a circuit out of which m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.12.1.13 | ColumnwfMTMStaticFwdMode | read-write | obsolete | static static entries overrides multicast protocol decisions statictodynamic Accept the multicast packet from a specified non-multicast and static configured i… |
| 1.3.6.1.4.1.18.3.5.3.2.6.13 | TablewfIpMospfAcceptTable | not-accessible | mandatory | The Table of Rip Accept Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1 | RowwfIpMospfAcceptEntry | not-accessible | mandatory | An entry in the Rip Accept Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.1 | ColumnwfIpMospfAcceptDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.2 | ColumnwfIpMospfAcceptDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.3 | ColumnwfIpMospfAcceptIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.4 | ColumnwfIpMospfAcceptName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.5 | ColumnwfIpMospfAcceptNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.6 | ColumnwfIpMospfAcceptAction | read-write | mandatory | action. 'accept' means that the route should be considered for inclusion in the routing table. 'ignore' means don't consider the route |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.7 | ColumnwfIpMospfAcceptPreference | read-write | mandatory | preference. This is a metric to be used to compare the route to other routes to the same destination. A value of 16 is 'most preferred'. This parameter only ha… |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.8 | ColumnwfIpMospfAcceptPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.9 | ColumnwfIpMospfAcceptInject | read-only | mandatory | network injection list. this octet string should only be non-null if the action is 'accept' and if it is desired to insert networks into the routing table that… |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.10 | ColumnwfIpMospfAcceptGateway | read-write | mandatory | RIP gateway list. This octet string contains the addresses of one or more routers that could send RIP updates to this router. If a router address is included i… |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.11 | ColumnwfIpMospfAcceptInterface | read-write | mandatory | RIP interface list. This octet string contains the addresses of one or more interfaces on this router. If an interface address is included in this list, this f… |
| 1.3.6.1.4.1.18.3.5.3.2.6.13.1.12 | ColumnwfIpMospfAcceptApplyMask | read-write | mandatory | Injection Mask: If the 'action' is accept and the actual received network will be considered, this is an optional IP address mask that will be applied to the n… |
| 1.3.6.1.4.1.18.3.5.3.2.6.14 | TablewfIpMospfAnnounceTable | not-accessible | mandatory | The Table of Mospf Announce Route Policy Rules. The rules in this table are how the mospf learns routes from DVMRP routing pool. |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1 | RowwfIpMospfAnnounceEntry | not-accessible | mandatory | An entry in the MOSPF Announce Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.1 | ColumnwfIpMospfAnnounceDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.2 | ColumnwfIpMospfAnnounceDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.3 | ColumnwfIpMospfAnnounceIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.4 | ColumnwfIpMospfAnnounceName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.5 | ColumnwfIpMospfAnnounceNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.6 | ColumnwfIpMospfAnnounceAction | read-write | mandatory | action. 'announce' means that the route should be advertised. 'ignore' means don't advertise the route. |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.7 | ColumnwfIpMospfAnnouncePrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.8 | ColumnwfIpMospfAnnounceRouteSource | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.9 | ColumnwfIpMospfAnnounceExtRouteSource | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.10 | ColumnwfIpMospfAnnounceAdvertise | read-write | mandatory | network advertisement list. this octet string should only be non-null if the action is 'announce' and if it is desired to advertise networks that differ from t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.11 | ColumnwfIpMospfAnnounceRipGateway | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.12 | ColumnwfIpMospfAnnounceRipInterface | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.13 | ColumnwfIpMospfAnnounceOspfRouterId | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.14 | ColumnwfIpMospfAnnounceOspfType | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.15 | ColumnwfIpMospfAnnounceOspfTag | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.16 | ColumnwfIpMospfAnnounceEgpPeer | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.17 | ColumnwfIpMospfAnnounceEgpPeerAs | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.18 | ColumnwfIpMospfAnnounceEgpGateway | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.19 | ColumnwfIpMospfAnnounceBgpPeer | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.20 | ColumnwfIpMospfAnnounceBgpPeerAs | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.14.1.21 | ColumnwfIpMospfAnnounceBgpNextHop | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.15 | TablewfIpDvmrpAcceptTable | not-accessible | mandatory | The Table of Rip Accept Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1 | RowwfIpDvmrpAcceptEntry | not-accessible | mandatory | An entry in the Dvmrp Accept Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.1 | ColumnwfIpDvmrpAcceptDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.2 | ColumnwfIpDvmrpAcceptDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.3 | ColumnwfIpDvmrpAcceptIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.4 | ColumnwfIpDvmrpAcceptName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.5 | ColumnwfIpDvmrpAcceptNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.6 | ColumnwfIpDvmrpAcceptAction | read-write | mandatory | action. 'accept' means that the route should be considered for inclusion in the routing table. 'ignore' means don't consider the route |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.7 | ColumnwfIpDvmrpAcceptPreference | read-only | mandatory | not used. This is here only for common internal data structures. |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.8 | ColumnwfIpDvmrpAcceptPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.9 | ColumnwfIpDvmrpAcceptInject | read-write | mandatory | Network injection list. this octet string should only be non-null if the action is 'accept' and if it is desired to insert networks into the routing table that… |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.10 | ColumnwfIpDvmrpAcceptGateway | read-write | mandatory | DVMRP gateway list. This octet string contains the addresses of one or more routers that could send DVMRP updates to this router. If a router address is includ… |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.11 | ColumnwfIpDvmrpAcceptInterface | read-write | mandatory | Dvmrp interface list. This is a list of DVMRP interfaces. If a interface appears in this list, the filter applies to DVMRP advertisements received on this inte… |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.12 | ColumnwfIpDvmrpAcceptApplyMask | read-only | mandatory | Not used in this release Injection Mask: If the 'action' is accept and the actual received network will be considered, this is an optional IP address mask that… |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.13 | ColumnwfIpDvmrpAcceptTunnels | read-write | mandatory | Dvmrp tunnel list. This is a list of DVMRP tunnels. If an tunnel interface appears in this listless filter applies to DVMRP advertisements sent via that tunnel… |
| 1.3.6.1.4.1.18.3.5.3.2.6.15.1.14 | ColumnwfIpDvmrpAcceptInjectMetric | read-write | mandatory | Inject Route Metric. This value represents the cost of the aggregated route which associates with wfIpDvmrpAcceptInject mib injects into DVMRP routing table. T… |
| 1.3.6.1.4.1.18.3.5.3.2.6.16 | TablewfIpDvmrpAnnounceTable | not-accessible | mandatory | The Table of Dvmrp Announce Route Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1 | RowwfIpDvmrpAnnounceEntry | not-accessible | mandatory | An entry in the Dvmrp Announce Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.1 | ColumnwfIpDvmrpAnnounceDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.2 | ColumnwfIpDvmrpAnnounceDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.3 | ColumnwfIpDvmrpAnnounceIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.4 | ColumnwfIpDvmrpAnnounceName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.5 | ColumnwfIpDvmrpAnnounceNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.6 | ColumnwfIpDvmrpAnnounceAction | read-write | mandatory | action. 'announce' means that the route should be advertised. 'ignore' means don't advertise the route. |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.7 | ColumnwfIpDvmrpAnnouncePrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.8 | ColumnwfIpDvmrpAnnounceRouteSource | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.9 | ColumnwfIpDvmrpAnnounceExtRouteSource | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.10 | ColumnwfIpDvmrpAnnounceAdvertise | read-write | mandatory | Network advertisement list. this octet string should only be non-null if the action is 'announce' and if it is desired to advertise networks that differ from t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.11 | ColumnwfIpDvmrpAnnounceRipGateway | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.12 | ColumnwfIpDvmrpAnnounceRipInterface | read-only | mandatory | Not used. Only here because of common internal data structures. |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.13 | ColumnwfIpDvmrpAnnounceOspfRouterId | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.14 | ColumnwfIpDvmrpAnnounceOspfType | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.15 | ColumnwfIpDvmrpAnnounceOspfTag | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.16 | ColumnwfIpDvmrpAnnounceEgpPeer | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.17 | ColumnwfIpDvmrpAnnounceEgpPeerAs | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.18 | ColumnwfIpDvmrpAnnounceEgpGateway | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.19 | ColumnwfIpDvmrpAnnounceBgpPeer | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.20 | ColumnwfIpDvmrpAnnounceBgpPeerAs | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.21 | ColumnwfIpDvmrpAnnounceBgpNextHop | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.22 | ColumnwfIpDvmrpAnnounceCircuits | read-write | obsolete | Dvmrp circuit list. This is a list of DVMRP circuits. If a circuit appears in this list, the filter applies to DVMRP advertisements sent via that circuit. If n… |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.23 | ColumnwfIpDvmrpAnnounceTunnels | read-write | mandatory | Dvmrp tunnel list. This is a list of DVMRP tunnels. If an tunnel interface appears in this list,the filter applies to DVMRP advertisements sent via that tunnel… |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.24 | ColumnwfIpDvmrpAnnounceMetric | read-write | mandatory | Route Metric. This value is announced as the metric for the routes specified in the network identification list. If non-null, then the routes for the specified… |
| 1.3.6.1.4.1.18.3.5.3.2.6.16.1.25 | ColumnwfIpDvmrpAnnounceInterface | read-write | mandatory | Dvmrp interface list. This is a list of DVMRP interfaces. If a interface appears in this list, the filter applies to DVMRP advertisements sent via that interfa… |
| 1.3.6.1.4.1.18.3.5.3.2.6.17 | TablewfIpDvmrpInjectRtTable | not-accessible | mandatory | The Table of Dvmrp Inject Unicast routes Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1 | RowwfIpDvmrpInjectRtEntry | not-accessible | mandatory | An entry in the Dvmrp Inject Route Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.1 | ColumnwfIpDvmrpInjectRtDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.2 | ColumnwfIpDvmrpInjectRtDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.3 | ColumnwfIpDvmrpInjectRtIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.4 | ColumnwfIpDvmrpInjectRtName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.5 | ColumnwfIpDvmrpInjectRtNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.6 | ColumnwfIpDvmrpInjectRtAction | read-write | mandatory | action. 'accept' means that the route should be imported from RTM to the DVMRP routing table. 'ignore' means don't consider the route |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.7 | ColumnwfIpDvmrpInjectRtPreference | read-write | mandatory | preference. This is a metric to be used to compare the preference path between inject route or the existing route in DVMRP routing table. If the injecting unic… |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.8 | ColumnwfIpDvmrpInjectRtPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.9 | ColumnwfIpDvmrpInjectRtInject | read-write | mandatory | network injection list. this octet string should only be non-null if the action is 'accept' and if it is desired to insert networks into the routing table that… |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.10 | ColumnwfIpDvmrpInjectRtInInterface | read-write | mandatory | Injected unicast routes inbound circuit list. This octet string contains one or more 4-octet IP addresses. If an interface address is included in this list, th… |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.11 | ColumnwfIpDvmrpInjectRtType | read-write | mandatory | Select the injected route type from RTM. |
| 1.3.6.1.4.1.18.3.5.3.2.6.17.1.12 | ColumnwfIpDvmrpInjectRtMetric | read-write | mandatory | Route Metric. This value represents the cost of the external routes which are OSPF or unicast best route to be injected into DVMRP routing table. The default v… |
| 1.3.6.1.4.1.18.3.5.3.2.6.18 | TablewfIpIisisAcceptTable | not-accessible | mandatory | The Table of Integrated IS-IS Accept Route Filter Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1 | RowwfIpIisisAcceptEntry | not-accessible | mandatory | An entry in the Integrated IS-IS Accept Route Policy Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1.1 | ColumnwfIpIisisAcceptDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1.2 | ColumnwfIpIisisAcceptDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1.3 | ColumnwfIpIisisAcceptIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1.4 | ColumnwfIpIisisAcceptName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1.5 | ColumnwfIpIisisAcceptNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1.6 | ColumnwfIpIisisAcceptAction | read-write | mandatory | action. 'accept' means that the route should be considered for inclusion in the routing table. 'ignore' means don't consider the route |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1.7 | ColumnwfIpIisisAcceptPreference | read-write | mandatory | preference. This is a metric to be used to compare the route to other routes to the same destination. A value of 16 is 'most preferred'. This parameter only ha… |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1.8 | ColumnwfIpIisisAcceptPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1.9 | ColumnwfIpIisisAcceptInject | read-only | mandatory | network injection list. this octet string should only be non-null if the action is 'accept' and if it is desired to insert networks into the routing table that… |
| 1.3.6.1.4.1.18.3.5.3.2.6.18.1.10 | ColumnwfIpIisisAcceptType | read-write | mandatory | Integrated IS-IS external metric type. This parameter describes which types of Integrated IS-IS routes match this filter. 'any' means 'match either internal or… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19 | TablewfIpIisisAnnounceTable | not-accessible | mandatory | The Table of Integrated IS-IS Announce Route Policy Rules |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1 | RowwfIpIisisAnnounceEntry | not-accessible | mandatory | An entry in the Announce Route Filter Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.1 | ColumnwfIpIisisAnnounceDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.2 | ColumnwfIpIisisAnnounceDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.3 | ColumnwfIpIisisAnnounceIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.4 | ColumnwfIpIisisAnnounceName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.5 | ColumnwfIpIisisAnnounceNetworks | read-write | mandatory | Network identification list. This identifies which networks will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: fir… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.6 | ColumnwfIpIisisAnnounceAction | read-write | mandatory | action. 'announce' means that the route should be advertised. 'ignore' means don't advertise the route. |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.7 | ColumnwfIpIisisAnnouncePrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.8 | ColumnwfIpIisisAnnounceRouteSource | read-write | mandatory | route source. This parameter can contain one or more route source identifiers. If the route source is in this bit map, then a route from that source that meets… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.9 | ColumnwfIpIisisAnnounceExtRouteSource | read-only | mandatory | NOT USED for Integrated IS-IS external route source. This parameter can contain one or more external route source identifiers. If the external route source is … |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.10 | ColumnwfIpIisisAnnounceAdvertise | read-write | mandatory | network advertisement list. this octet string should only be non-null if the action is 'announce' and if it is desired to advertise networks that differ from t… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.11 | ColumnwfIpIisisAnnounceRipGateway | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from RIP' gateway list. Only applicable for RIP sourced routes and if RIP is included as a route source. Thi… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.12 | ColumnwfIpIisisAnnounceRipInterface | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from RIP' interface list. Only applicable for RIP sourced routes and if RIP is included as a route source. T… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.13 | ColumnwfIpIisisAnnounceIisisRouterId | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from OSPF' Router ID list. Only applicable for OSPF sourced routes and if OSPF is included as a route source… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.14 | ColumnwfIpIisisAnnounceIisisType | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from OSPF' route type. Only applicable for OSPF sourced routes and if OSPF is included as a route source. Th… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.15 | ColumnwfIpIisisAnnounceIisisTag | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from OSPF' ASE tag list. Only applicable for OSPF sourced ASE routes and if OSPF is included as a route sour… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.16 | ColumnwfIpIisisAnnounceEgpPeer | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from EGP' Peer list. Only applicable for EGP sourced routes and if EGP is included as a route source. This o… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.17 | ColumnwfIpIisisAnnounceEgpPeerAs | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from EGP' Peer AS list. Only applicable for EGP sourced routes and if EGP is included as a route source. Thi… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.18 | ColumnwfIpIisisAnnounceEgpGateway | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from EGP' Gateway list. Only applicable for EGP sourced routes and if EGP is included as a route source. Thi… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.19 | ColumnwfIpIisisAnnounceBgpPeer | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from BGP' Peer list. Only applicable for BGP sourced routes and if BGP is included as a route source. This o… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.20 | ColumnwfIpIisisAnnounceBgpPeerAs | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from BGP' AS list. Only applicable for BGP sourced routes and if BGP is included as a route source. This oct… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.21 | ColumnwfIpIisisAnnounceBgpNextHop | read-write | mandatory | Not applicable for first phase of Integrated IS_IS from BGP' NextHop list. Only applicable for BGP sourced routes and if BGP is included as a route source. Thi… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.22 | ColumnwfIpIisisAnnounceType | read-write | mandatory | OSPF ASE type. The ASE type to use for routes that match this filter. This is only applicable if the action is 'accept'. A zero value means to use the default … |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.23 | ColumnwfIpIisisAnnounceTag | read-write | mandatory | Not applicable for Integrated IS-IS OSPF ASE tag. The ASE tag value to use for routes that match this filter. This is only applicable if the action is 'accept'… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.24 | ColumnwfIpIisisAnnounceAutoTag | read-write | mandatory | Not applicable for Integrated IS-IS BGP/OSPF automatic tag generation: Only applicable if action is 'announce'. if set to 'disabled', the value in wfIpIisisAnn… |
| 1.3.6.1.4.1.18.3.5.3.2.6.19.1.25 | ColumnwfIpIisisAnnounceMetric | read-write | mandatory | The optional metric to apply to this route. Zero means : use the route's actual cost. Only valid for propagate. |
| 1.3.6.1.4.1.18.3.5.3.2.6.20 | TablewfMTMStaticForwardTable | not-accessible | mandatory | The Table of static forwarding entries |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1 | RowwfMTMStaticForwardEntry | not-accessible | mandatory | An entry in the static forwarding Table |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.1 | ColumnwfMTMStaticForwardDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.2 | ColumnwfMTMStaticForwardDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.3 | ColumnwfMTMStaticForwardIndex | read-only | mandatory | Rule index number |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.4 | ColumnwfMTMStaticForwardName | read-write | mandatory | Rule name - user specified name for this rule |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.5 | ColumnwfMTMStaticForwardGroups | read-write | mandatory | Group list. This identifies which groups will match this rule. If non-null, The octet string contains one or more 2-tuples of this form: First octet : 0x1(exac… |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.6 | ColumnwfMTMStaticForwardAction | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.7 | ColumnwfMTMStaticForwardPreference | read-write | mandatory | note: Not used .This is here only for common internal data structures |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.8 | ColumnwfMTMStaticForwardPrecedence | read-write | mandatory | precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be … |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.9 | ColumnwfMTMStaticForwardInject | read-only | mandatory | not used. this is here only because of a common internal data structure |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.10 | ColumnwfMTMStaticForwardSources | read-write | mandatory | Source identification list. This identifies which sources will match this rule. If non-null, The octet string contains one or more 2-tuples of this form: next … |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.11 | ColumnwfMTMStaticForwardInCircuits | read-write | mandatory | Inbound ircuit ist. This is not a selection criteria. If non-null, The octet string contains one or more 2-octet, each representing a circuit on which mulicast… |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.12 | ColumnwfMTMStaticForwardOutCircuits | read-write | mandatory | Outbound circuit list. This is not a selection criteria. If non-null, The octet string contains one or more 2-tuple, each representing a circuit out of which m… |
| 1.3.6.1.4.1.18.3.5.3.2.6.20.1.13 | ColumnwfMTMStaticForwardMode | read-write | mandatory | static static entries overrides multicast protocol decisions statictodynamic Accept the multicast packet from a specified non-multicast and static configured i… |