Wellfleet-IPSEC-MIB
165 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.26.1 | NodewfIpsecBase | |||
| 1.3.6.1.4.1.18.3.5.3.26.1.1 | ScalarwfIpsecBaseCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IPSec. |
| 1.3.6.1.4.1.18.3.5.3.26.1.2 | ScalarwfIpsecBaseEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable IPSec. |
| 1.3.6.1.4.1.18.3.5.3.26.1.3 | ScalarwfIpsecBaseState | read-only | mandatory | The current state of IPsec. |
| 1.3.6.1.4.1.18.3.5.3.26.1.4 | ScalarwfIpsecBaseEspEncipherEnable | read-write | mandatory | Used to control the whether ESP enciphers packets or not. Set this attribute to disable for debugging purposes only. When set to disabled, packets that match a… |
| 1.3.6.1.4.1.18.3.5.3.26.1.5 | ScalarwfIpsecBaseMaxManualSpi | read-write | mandatory | The maximum SPI value that will be accepted for manually configured SAs. The SA values 0 - 255 is reserved. To enter this value add the number of SAs belonging… |
| 1.3.6.1.4.1.18.3.5.3.26.2 | TablewfIpsecSelectorInTable | not-accessible | mandatory | A table of selectors used to identify which IP security policy should be applied to a packet. |
| 1.3.6.1.4.1.18.3.5.3.26.2.1 | RowwfIpsecSelectorInEntry | not-accessible | mandatory | IP Security Selectors for a policy |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.1 | ColumnwfIpsecSelectorInCreate | read-write | mandatory | Defines the existence of the policy's selectors: created - instance exists delete - instance should be deleted. |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.2 | ColumnwfIpsecSelectorInEnable | read-write | mandatory | Defines whether or not the policy should be used: enabled - activate the policy's selectors. disabled - deactivate the policy's selectors. |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.3 | ColumnwfIpsecSelectorInStatus | read-only | mandatory | Defines the current status of the this instance: up: this instance is in use down: this instance is misconfigured inactive: this instance is disabled notpresen… |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.4 | ColumnwfIpsecSelectorInCounter | read-only | mandatory | The number of received packets that have matched the selectors. |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.5 | ColumnwfIpsecSelectorInDefinition | read-write | mandatory | The policy's selector definition. |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.6 | ColumnwfIpsecSelectorInReserved | read-only | mandatory | Reserved field. |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.7 | ColumnwfIpsecSelectorInInterface | read-only | mandatory | The network address of the IP interface to which the corresponding policy is applied. |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.8 | ColumnwfIpsecSelectorInCircuit | read-only | mandatory | The ID of the Circuit to which the corresponding policy is applied. |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.9 | ColumnwfIpsecSelectorInPolicyNumber | read-only | mandatory | ID policy's selectors. |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.10 | ColumnwfIpsecSelectorInFragment | read-only | mandatory | Fragment number - for large sets of selectors. |
| 1.3.6.1.4.1.18.3.5.3.26.2.1.11 | ColumnwfIpsecSelectorInName | read-write | mandatory | name of this instance of selectors. |
| 1.3.6.1.4.1.18.3.5.3.26.3 | TablewfIpsecSelectorOutTable | not-accessible | mandatory | A table of selectors used to identify which IP security policy should be applied to a packet. |
| 1.3.6.1.4.1.18.3.5.3.26.3.1 | RowwfIpsecSelectorOutEntry | not-accessible | mandatory | IP Security Selectors for a policy |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.1 | ColumnwfIpsecSelectorOutCreate | read-write | mandatory | Defines the existence of the policy's selectors: created - instance exists delete - instance should be deleted. |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.2 | ColumnwfIpsecSelectorOutEnable | read-write | mandatory | Defines whether or not the policy should be used: enabled - activate the policy's selectors. disabled - deactivate the policy's selectors. |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.3 | ColumnwfIpsecSelectorOutStatus | read-only | mandatory | Defines the current status of the this instance: up: this instance is in use down: this instance is misconfigured inactive: this instance is disabled notpresen… |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.4 | ColumnwfIpsecSelectorOutCounter | read-only | mandatory | The number of received packets that have matched the selectors. |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.5 | ColumnwfIpsecSelectorOutDefinition | read-write | mandatory | The policy's selector definition. |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.6 | ColumnwfIpsecSelectorOutReserved | read-only | mandatory | Reserved field. |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.7 | ColumnwfIpsecSelectorOutInterface | read-only | mandatory | The network address of the IP interface to which the corresponding policy is applied. |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.8 | ColumnwfIpsecSelectorOutCircuit | read-only | mandatory | The ID of the Circuit to which the corresponding policy is applied. |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.9 | ColumnwfIpsecSelectorOutPolicyNumber | read-only | mandatory | ID policy's selectors. |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.10 | ColumnwfIpsecSelectorOutFragment | read-only | mandatory | Fragment number - for large sets of selectors. |
| 1.3.6.1.4.1.18.3.5.3.26.3.1.11 | ColumnwfIpsecSelectorOutName | read-write | mandatory | name of this instance of selectors. |
| 1.3.6.1.4.1.18.3.5.3.26.4 | TablewfIpsecDescriptorTable | not-accessible | mandatory | Table of IP security descriptors |
| 1.3.6.1.4.1.18.3.5.3.26.4.1 | RowwfIpsecDescriptorEntry | not-accessible | mandatory | An IP security Descriptor |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.1 | ColumnwfIpsecDescriptorCreate | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.2 | ColumnwfIpsecDescriptorStatus | read-only | mandatory | The status of this instance: up: this instance is in use down: this instance is misconfigured inactive: this instance is disabled notpresent: the IPsec code is… |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.3 | ColumnwfIpsecDescriptorPolicyNumber | read-only | mandatory | Allows instance of wfIpsecSelectorOutEntry to be matched with this instance. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.4 | ColumnwfIpsecDescriptorInterface | read-only | mandatory | The IP address of the security gateway which this descriptor belongs to. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.5 | ColumnwfIpsecDescriptorCircuit | read-only | mandatory | The ID of the Circuit to which this instance applies. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.6 | ColumnwfIpsecDescriptorManualSaList | read-write | mandatory | the octet string represents an ordered list of Security Associations (SAs). the format of each 9 byte sequence is: | protocol | Peer IP Address | | SPI | |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.7 | ColumnwfIpsecDescriptorSaMode | read-write | mandatory | Identifies mode of the SA for this policy. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.8 | ColumnwfIpsecDescriptorPfs | read-write | mandatory | Identifies whether perfect forward secrecy is required or not. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.9 | ColumnwfIpsecDescriptorProposals | read-write | mandatory | the octet string represents an ordered list of proposals. Every 2 octets in the string contains a number which corresponds to an instance I.D. of wfIpsecPropos… |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.10 | ColumnwfIpsecDescriptorSourceForDestAddr | read-write | mandatory | The source for the destination IP address value to be used in the SA. 'packet' limits use of the SA to those packets which have a matching IP addr even if the … |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.11 | ColumnwfIpsecDescriptorSourceForSrcAddr | read-write | mandatory | The source for the destination IP address value to be used in the SA. 'packet' limits use of the SA to those packets which have a matching IP addr even if the … |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.12 | ColumnwfIpsecDescriptorSourceForProtocol | read-write | mandatory | The source for the destination IP address value to be used in the SA. 'packet' limits use of the SA to those packets which have a matching IP addr even if the … |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.13 | ColumnwfIpsecDescriptorStartSourceAddr | read-write | mandatory | The start Source IP address for the dynamic SA. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.14 | ColumnwfIpsecDescriptorEndSourceAddr | read-write | mandatory | The end Source IP address for the dynamic SA. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.15 | ColumnwfIpsecDescriptorStartDestAddr | read-write | mandatory | The start Destination IP address for the dynamic SA. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.16 | ColumnwfIpsecDescriptorEndDestAddr | read-write | mandatory | The end Source IP address for the dynamic SA. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.17 | ColumnwfIpsecDescriptorSourcePort | read-write | mandatory | The source port number for the dynamic SA. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.18 | ColumnwfIpsecDescriptorProtocol | read-write | mandatory | The IP protocol for the dynamic SA. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.19 | ColumnwfIpsecDescriptorPrimarySG | read-write | mandatory | The address of the remote gateway. |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.20 | ColumnwfIpsecDescriptorInboundIdleTimer | read-write | mandatory | Inbound (Unprotect) SA inactivity timer, in minutes. If no traffic is received on an automated inbound SA for the indicated time, both SAs for this policy will… |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.21 | ColumnwfIpsecDescriptorAntiReplayWindow | read-write | mandatory | Anti-replay checking implies checking the sequence number of each encrypted packet received and determining if we have received this packet before. Anti-replay… |
| 1.3.6.1.4.1.18.3.5.3.26.4.1.22 | ColumnwfIpsecDescriptorDestPort | read-write | mandatory | The destination port number for the dynamic SA. |
| 1.3.6.1.4.1.18.3.5.3.26.5 | TablewfIpsecEspSaTable | not-accessible | mandatory | The ESP security association table |
| 1.3.6.1.4.1.18.3.5.3.26.5.1 | RowwfIpsecEspSaEntry | not-accessible | mandatory | Entry in ESP security association table |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.1 | ColumnwfIpsecEspSaCreate | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.2 | ColumnwfIpsecEspSaStatus | read-only | mandatory | The current status of this Security Association: up: this SA is in use down: this SA is misconfigured inactive: this SA is disabled notpresent: the IPsec code … |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.3 | ColumnwfIpsecEspSaSrc | read-only | mandatory | The IP address of the SA's source. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.4 | ColumnwfIpsecEspSaDest | read-only | mandatory | The IP address of the SA's destination. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.5 | ColumnwfIpsecEspSaSpi | read-only | mandatory | The security parameters index |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.6 | ColumnwfIpsecEspSaCipherAlg | read-write | mandatory | Identifies cipher algorithm for this SA. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.7 | ColumnwfIpsecEspSaManualCipherKey | read-write | mandatory | The key for a manually-keyed SA's cipher algorithm |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.8 | ColumnwfIpsecEspSaDesKeyStrength | read-write | mandatory | The strength of the cipher key. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.9 | ColumnwfIpsecEspSaIntegrityAlg | read-write | mandatory | The algorithm for ESP Auth. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.10 | ColumnwfIpsecEspSaManualIntegrityKey | read-write | mandatory | The key for a manually-keyed SA's integrity algorithm |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.11 | ColumnwfIpsecEspSaVerifyPad | read-write | mandatory | This attribute enables checking of the pad field of ESP packets making sure it is in expected numeric ascending order. Packets with bad padding are discarded. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.12 | ColumnwfIpsecEspSaReset | read-write | mandatory | Reset IPSec SA statistics indicator. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.13 | ColumnwfIpsecEspSaBadAuthen | read-only | mandatory | The number of received encrypted packets that could not be properly authenticated. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.14 | ColumnwfIpsecEspSaBadDecrypt | read-only | mandatory | The number of received packets that could not be properly decrypted. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.15 | ColumnwfIpsecEspSaBadPad | read-only | mandatory | The number of received packets that contained bad padding information. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.16 | ColumnwfIpsecEspSaProtectPkt | read-only | mandatory | The number of successfully encrypted packets. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.17 | ColumnwfIpsecEspSaUnprotectPkt | read-only | mandatory | The number of successfully decrypted packets. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.18 | ColumnwfIpsecEspSaEncryptByte | read-only | mandatory | The number of successfully encrypted bytes. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.19 | ColumnwfIpsecEspSaDecryptByte | read-only | mandatory | The number of successfully encrypted bytes. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.20 | ColumnwfIpsecEspSaMode | read-write | mandatory | Identifies mode of the SA. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.21 | ColumnwfIpsecEspSaPfs | read-write | mandatory | Identifies whether this SA has perfect forward secrecy or not. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.22 | ColumnwfIpsecEspSaExpiryType | read-write | mandatory | The units used to interpret the expiry value. The SA's keys don't expire when this is set to none. |
| 1.3.6.1.4.1.18.3.5.3.26.5.1.23 | ColumnwfIpsecEspSaExpiryValue | read-write | mandatory | The value used to determine when the keys for this SA expire. |
| 1.3.6.1.4.1.18.3.5.3.26.6 | TablewfIpsecStatsTable | not-accessible | mandatory | The interface statistics table |
| 1.3.6.1.4.1.18.3.5.3.26.6.1 | RowwfIpsecStatsEntry | not-accessible | mandatory | Entry in Interface Statistics Table |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.1 | ColumnwfIpsecStatsCreate | read-only | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.2 | ColumnwfIpsecStatsInterface | read-only | mandatory | The IP address of the security gateway which these statistics belong to. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.3 | ColumnwfIpsecStatsCircuit | read-only | mandatory | The ID of the Circuit to which this instance applies. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.4 | ColumnwfIpsecStatsReset | read-write | mandatory | Reset IPSec statistics indicator. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.5 | ColumnwfIpsecStatsUnprotectPkt | read-only | mandatory | The number of received packets successfully decrypted. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.6 | ColumnwfIpsecStatsProtectPkt | read-only | mandatory | The number of received packets successfully encrypted. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.7 | ColumnwfIpsecStatsBypassPkt | read-only | mandatory | The number of received packets that have bypassed. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.8 | ColumnwfIpsecStatsDropPkt | read-only | mandatory | The number of received packets that have been dropped. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.9 | ColumnwfIpsecStatsNoSa | read-only | mandatory | The number of received packets for which no SA was found. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.10 | ColumnwfIpsecStatsLastBadSpi | read-only | mandatory | The last security parameters index for which no SA could be found. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.11 | ColumnwfIpsecStatsNoPolicyMatch | read-only | mandatory | The number of received packets for which no policy match could be found. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.12 | ColumnwfIpsecStatsSaExpDropBytes | read-only | mandatory | The number of bytes discarded owing to SA Expiry |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.13 | ColumnwfIpsecStatsOutClips | read-only | mandatory | The number of outbound packets clipped due to buffer congestion. |
| 1.3.6.1.4.1.18.3.5.3.26.6.1.14 | ColumnwfIpsecStatsInClips | read-only | mandatory | The number of inbound packets clipped due to buffer congestion. |
| 1.3.6.1.4.1.18.3.5.3.26.7 | TablewfIpsecRemoteGatewayTable | not-accessible | mandatory | A table of known remote Security Gateways. |
| 1.3.6.1.4.1.18.3.5.3.26.7.1 | RowwfIpsecRemoteGatewayEntry | not-accessible | mandatory | A remote Security Gateway |
| 1.3.6.1.4.1.18.3.5.3.26.7.1.1 | ColumnwfIpsecRemoteGatewayCreate | read-write | mandatory | creates or deletes an instance. |
| 1.3.6.1.4.1.18.3.5.3.26.7.1.2 | ColumnwfIpsecRemoteGatewayEnable | read-write | mandatory | enables and disables this instance. |
| 1.3.6.1.4.1.18.3.5.3.26.7.1.3 | ColumnwfIpsecRemoteGatewayStatus | read-only | mandatory | Defines the current status of the instance: inactive - ? active - ? error - ? |
| 1.3.6.1.4.1.18.3.5.3.26.7.1.4 | ColumnwfIpsecRemoteGatewayInterface | read-only | mandatory | The address of the IP interface to which this instance applies. |
| 1.3.6.1.4.1.18.3.5.3.26.7.1.5 | ColumnwfIpsecRemoteGatewayCircuit | read-only | mandatory | The ID of the Circuit to which the instance applies. |
| 1.3.6.1.4.1.18.3.5.3.26.7.1.6 | ColumnwfIpsecRemoteGatewayIndex | read-only | mandatory | An index used to differentiate remote gateway instances. |
| 1.3.6.1.4.1.18.3.5.3.26.7.1.7 | ColumnwfIpsecRemoteGatewayIpAddr | read-write | mandatory | The address of the remote gateway. |
| 1.3.6.1.4.1.18.3.5.3.26.7.1.8 | ColumnwfIpsecRemoteGatewayRange | read-write | mandatory | The range of destination IP addresses that the remote security gateway represents. |
| 1.3.6.1.4.1.18.3.5.3.26.7.1.9 | ColumnwfIpsecRemoteGatewayName | read-write | mandatory | name of the remote security gateway. |
| 1.3.6.1.4.1.18.3.5.3.26.8 | TablewfIpsecProposalTable | not-accessible | mandatory | Table of IP security proposals |
| 1.3.6.1.4.1.18.3.5.3.26.8.1 | RowwfIpsecProposalEntry | not-accessible | mandatory | An IP security Proposal. This is essentially a sequence of protection suites represented by wfIpsecSuiteEntry instances |
| 1.3.6.1.4.1.18.3.5.3.26.8.1.1 | ColumnwfIpsecProposalCreate | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.5.3.26.8.1.2 | ColumnwfIpsecProposalStatus | read-only | mandatory | The status of this Proposal. |
| 1.3.6.1.4.1.18.3.5.3.26.8.1.3 | ColumnwfIpsecProposalName | read-write | mandatory | Proposal name. |
| 1.3.6.1.4.1.18.3.5.3.26.8.1.4 | ColumnwfIpsecProposalNumber | read-only | mandatory | A number that identifies this proposal. |
| 1.3.6.1.4.1.18.3.5.3.26.8.1.5 | ColumnwfIpsecProposalSuites | read-write | mandatory | the octet string contains a list of ordered, 2 byte numbers that correspond to wfIpsecSuiteEntry instance ID's. The list of protection suites is a logically AN… |
| 1.3.6.1.4.1.18.3.5.3.26.9 | TablewfIpsecSuiteTable | not-accessible | mandatory | Table of IP security protection suites |
| 1.3.6.1.4.1.18.3.5.3.26.9.1 | RowwfIpsecSuiteEntry | not-accessible | mandatory | An IP security protection suite |
| 1.3.6.1.4.1.18.3.5.3.26.9.1.1 | ColumnwfIpsecSuiteCreate | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.5.3.26.9.1.2 | ColumnwfIpsecSuiteStatus | read-only | mandatory | The status of this Suite. |
| 1.3.6.1.4.1.18.3.5.3.26.9.1.3 | ColumnwfIpsecSuiteName | read-write | mandatory | Suite name. |
| 1.3.6.1.4.1.18.3.5.3.26.9.1.4 | ColumnwfIpsecSuiteNumber | read-only | mandatory | A number that identifies this protection suite. |
| 1.3.6.1.4.1.18.3.5.3.26.9.1.5 | ColumnwfIpsecSuiteEspProtocol | read-write | mandatory | The ordered sequence of wfIpsecEspTransformEntry instances that comprise this protection suite. |
| 1.3.6.1.4.1.18.3.5.3.26.9.1.6 | ColumnwfIpsecSuiteAhProtocol | read-write | mandatory | The ordered sequence of wfIpsecAhProposalEntry instances that comprise this protection suite. |
| 1.3.6.1.4.1.18.3.5.3.26.10 | TablewfIpsecEspTransformTable | not-accessible | mandatory | Table of IP security policies |
| 1.3.6.1.4.1.18.3.5.3.26.10.1 | RowwfIpsecEspTransformEntry | not-accessible | mandatory | An IP security ESP Transform |
| 1.3.6.1.4.1.18.3.5.3.26.10.1.1 | ColumnwfIpsecEspTransformCreate | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.5.3.26.10.1.2 | ColumnwfIpsecEspTransformStatus | read-only | mandatory | The status of this ESP Transform. |
| 1.3.6.1.4.1.18.3.5.3.26.10.1.3 | ColumnwfIpsecEspTransformName | read-write | mandatory | ESP Transform name. |
| 1.3.6.1.4.1.18.3.5.3.26.10.1.4 | ColumnwfIpsecEspTransformNumber | read-only | mandatory | A number that identifies this ESP proposal. |
| 1.3.6.1.4.1.18.3.5.3.26.10.1.5 | ColumnwfIpsecEspTransformCipherAlg | read-write | mandatory | The cipher algorithm for ESP. |
| 1.3.6.1.4.1.18.3.5.3.26.10.1.6 | ColumnwfIpsecEspTransformKeyLength | read-write | mandatory | The key length for the ESP cipher algorithm. |
| 1.3.6.1.4.1.18.3.5.3.26.10.1.7 | ColumnwfIpsecEspTransformIntegrityAlg | read-write | mandatory | The algorithm for ESP Auth. |
| 1.3.6.1.4.1.18.3.5.3.26.10.1.8 | ColumnwfIpsecEspTransformExpiryTime | read-write | mandatory | The value used to determine when the keys for this SA expire due to the passage of time. The units are minutes. The minium recommended value is 10 min. |
| 1.3.6.1.4.1.18.3.5.3.26.10.1.9 | ColumnwfIpsecEspTransformExpiryMBytes | read-write | mandatory | The value used to determine when the keys for this SA expire due to the number of bytes processed. The units are mega-bytes. The minium recommended value is 10… |
| 1.3.6.1.4.1.18.3.5.3.26.10.1.10 | ColumnwfIpsecEspTransformExpiryPref | read-write | mandatory | The value used to determine precedence between time/kbyte expiry |
| 1.3.6.1.4.1.18.3.5.3.26.11 | TablewfIpsecAhTransformTable | not-accessible | mandatory | Table of IP security policies |
| 1.3.6.1.4.1.18.3.5.3.26.11.1 | RowwfIpsecAhTransformEntry | not-accessible | mandatory | An IP security AhTransform |
| 1.3.6.1.4.1.18.3.5.3.26.11.1.1 | ColumnwfIpsecAhTransformCreate | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.5.3.26.11.1.2 | ColumnwfIpsecAhTransformStatus | read-only | mandatory | The status of this AhTransform. |
| 1.3.6.1.4.1.18.3.5.3.26.11.1.3 | ColumnwfIpsecAhTransformName | read-write | mandatory | AhTransform name. |
| 1.3.6.1.4.1.18.3.5.3.26.11.1.4 | ColumnwfIpsecAhTransformNumber | read-only | mandatory | A number that identifies this AH proposal. |
| 1.3.6.1.4.1.18.3.5.3.26.11.1.5 | ColumnwfIpsecAhTransformIntegrityAlg | read-write | mandatory | The algorithm for AH. |
| 1.3.6.1.4.1.18.3.5.3.26.11.1.6 | ColumnwfIpsecAhTransformGroup | read-write | mandatory | The DH group |
| 1.3.6.1.4.1.18.3.5.3.26.11.1.7 | ColumnwfIpsecAhTransformExpiryType | read-write | mandatory | The units used to interpret the expiry value. The SA's keys don't expire when this is set to none. |
| 1.3.6.1.4.1.18.3.5.3.26.11.1.8 | ColumnwfIpsecAhTransformExpiryValue | read-write | mandatory | The value used to determine when the keys for this SA expire. |
| 1.3.6.1.4.1.18.3.5.3.26.12 | TablewfIpsecSaStatsTable | not-accessible | mandatory | The Ipsec automated SA table |
| 1.3.6.1.4.1.18.3.5.3.26.12.1 | RowwfIpsecSaStatsEntry | not-accessible | mandatory | Entry in Automated ESP SA table |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.1 | ColumnwfIpsecSaStatsStatus | read-only | mandatory | The current status of this Security Association: up: this SA is in use down: this SA is misconfigured ??? inactive: this SA is disabled ??? notpresent: the IPs… |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.2 | ColumnwfIpsecSaStatsSrc | read-only | mandatory | The IP address of the SA's source. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.3 | ColumnwfIpsecSaStatsDest | read-only | mandatory | The IP address of the SA's destination. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.4 | ColumnwfIpsecSaStatsSpi | read-only | mandatory | The security parameters index |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.5 | ColumnwfIpsecSaStatsProto | read-only | mandatory | The protocol used by this SA. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.6 | ColumnwfIpsecSaStatsCipherAlg | read-only | mandatory | Identifies cipher algorithm for this SA. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.7 | ColumnwfIpsecSaStatsIntegrityAlg | read-only | mandatory | The algorithm for ESP Auth. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.8 | ColumnwfIpsecSaStatsBadAuthen | read-only | mandatory | The number of received encrypted packets that could not be properly authenticated. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.9 | ColumnwfIpsecSaStatsBadDecrypt | read-only | mandatory | The number of received packets that could not be properly decrypted. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.10 | ColumnwfIpsecSaStatsBadPad | read-only | mandatory | The number of received packets that contained bad padding information. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.11 | ColumnwfIpsecSaStatsProtectPkt | read-only | mandatory | The number of successfully encrypted packets. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.12 | ColumnwfIpsecSaStatsUnprotectPkt | read-only | mandatory | The number of successfully decrypted packets. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.13 | ColumnwfIpsecSaStatsEncryptByte | read-only | mandatory | The number of successfully encrypted bytes. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.14 | ColumnwfIpsecSaStatsDecryptByte | read-only | mandatory | The number of successfully encrypted bytes. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.15 | ColumnwfIpsecSaStatsMode | read-only | mandatory | Identifies mode of the SA. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.16 | ColumnwfIpsecSaStatsPfs | read-only | mandatory | Identifies whether this SA has perfect forward secrecy or not. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.17 | ColumnwfIpsecSaStatsExpiryType | read-only | mandatory | The units used to interpret the expiry value. The SA's keys don't expire when this is set to none. |
| 1.3.6.1.4.1.18.3.5.3.26.12.1.18 | ColumnwfIpsecSaStatsExpiryValue | read-only | mandatory | The value used to determine when the keys for this SA expire. |