Wellfleet-IPV6-MIB
245 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.16.1 | NodewfIpv6RoutingGroup | |||
| 1.3.6.1.4.1.18.3.5.3.16.1.1 | NodewfIpv6RoutingGeneralGroup | |||
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1 | NodewfIpv6Base | |||
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.1 | ScalarwfIpv6BaseDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IPv6. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.2 | ScalarwfIpv6BaseDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable IPv6. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.3 | ScalarwfIpv6BaseState | read-only | mandatory | The current state of the entire IPv6. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.4 | ScalarwfIpv6BaseForwarding | read-write | mandatory | The indication of whether this entity is acting as an IPv6 router in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.5 | ScalarwfIpv6BaseDefaultHopLimit | read-write | mandatory | The default value inserted into the 'Hop Limit' field of the IPv6 header of datagrams originated at this entity, whenever a Hop-Limit value is not supplied by … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.6 | ScalarwfIpv6BaseMinLinkMTU | read-write | mandatory | This parameter indicates the minimum link MTU that is assumed for every link in the IPv6 internet. IPv6 specification defines this value to be 576 bytes, which… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.7 | ScalarwfIpv6BaseMTUDiscovery | read-write | mandatory | Whether the Path MTU discovery support for self-originated traffic is enabled/disabled |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.8 | ScalarwfIpv6BaseMTUTimeout | read-write | mandatory | Timeout period for discovered Path MTU value in minutes. 0 indicates infinite timeout period, i.e. no timeout. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.9 | ScalarwfIpv6BaseIfNumber | read-only | mandatory | The number of network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.10 | ScalarwfIpv6BaseNetworks | read-only | mandatory | The number of network layer reachability entries in the routing table |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.11 | ScalarwfIpv6BaseNodes | read-only | mandatory | This parameter indicates the number of nodes known by IPv6 |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.1.12 | ScalarwfIpv6BaseHighestFilterRule | read-write | mandatory | The highest rule number (wfIpv6FilterNumber) that can be used in a traffic filter definition. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2 | TablewfIpv6IfTable | not-accessible | mandatory | The list of IPv6 interface entries. This is the configuration table of logical IPv6 interfaces at the network layer. An IPv6 interface constitutes a logical ne… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1 | RowwfIpv6IfEntry | not-accessible | mandatory | An interface entry containing objects at the a particular IPv6 interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.1 | ColumnwfIpv6IfDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IPv6 interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.2 | ColumnwfIpv6IfDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IPv6 interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.3 | ColumnwfIpv6IfState | read-only | mandatory | The current operational state of the interface. Tokenless state indicates the no valid address token is assigned to the interface. This state usually indicates… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.4 | ColumnwfIpv6IfIndex | read-only | mandatory | A unique non-zero value for each interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.5 | ColumnwfIpv6IfDescr | read-write | mandatory | An optional textual string containing description of the interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.6 | ColumnwfIpv6IfCircuit | read-write | mandatory | The Circuit Number that this interface runs over. If Circuit Number is between 1 and 1023, it identifies a subnetwork/datalink layer interface, i.e. the layer … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.7 | ColumnwfIpv6IfCfgToken | read-write | mandatory | The desired identifier (interface token) for this interface that is (at least) unique on the link this interface is attached to. The interface token is combine… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.8 | ColumnwfIpv6IfCfgTokenLength | read-write | mandatory | The length of the configured interface token in bits. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.9 | ColumnwfIpv6IfToken | read-only | mandatory | The actual identifier (interface token) for this interface that is (at least) unique on the link this interface is attached to. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.10 | ColumnwfIpv6IfTokenLength | read-only | mandatory | The length of the interface token in bits. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.11 | ColumnwfIpv6IfCfgPhysicalAddress | read-write | mandatory | The desired link layer address set by the user |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.12 | ColumnwfIpv6IfPhysicalAddress | read-only | mandatory | The Physical Address for this Interface - actual one used |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.13 | ColumnwfIpv6IfCfgLinkMTU | read-write | mandatory | The configured link MTU. It will be only considered if it is less than the default MTU of the underlying media. A value of zero indicates that the default MTU … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.14 | ColumnwfIpv6IfFwdCacheSize | read-write | mandatory | Maximum number of entries allowed in the Forwarding (Cache) Table at one time. There is a forwarding table per interface. If this attribute is set to zero, the… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.15 | ColumnwfIpv6IfSlotMask | read-write | mandatory | Slot mask for which slots a circuit-less interface is eligible to run on. The most significant bit represents slot 1, the next most significant bit represents … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.16 | ColumnwfIpv6IfLastChange | read-only | mandatory | The time (in hundredths of a second) since the node was last re-initialized at the time the interface entered its current operational state. Usually the time s… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.17 | ColumnwfIpv6IfReasmMaxSize | read-only | mandatory | The size of the largest IPv6 datagram which this entity can re-assemble from incoming IPv6 fragmented packets received on this interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.18 | ColumnwfIpv6IfMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this port will receive or transmit (effective MTU size). |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.19 | ColumnwfIpv6IfRedirect | read-write | mandatory | Indicates whether we're sending out redirects on this Interface or not |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.20 | ColumnwfIpv6IfIcmpErrorLimit | read-write | mandatory | The maximum number of ICMP Error messages that is allowed to be transmitted within 1 second interval out of this interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.21 | ColumnwfIpv6IfTrEndStation | read-write | mandatory | Use Source Routing over token ring selection. Only applies if a token ring interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.22 | ColumnwfIpv6IfSMDSGroupAddress | read-write | mandatory | The SMDS group address |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.23 | ColumnwfIpv6IfFRBcastDlci | read-write | mandatory | Frame Relay broadcast dlci |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.24 | ColumnwfIpv6IfFRMcast1Dlci | read-write | mandatory | Frame Relay multicast dlci #1 |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.25 | ColumnwfIpv6IfFRMcast2Dlci | read-write | mandatory | Frame Relay multicast dlci #2 |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.26 | ColumnwfIpv6IfTunnelProtocol | read-write | mandatory | If wfIpv6IfCircuit is zero, this parameter specifies the tunnel protocol type: ip4st - IPv6-in-IPv4 static tunnel, ip6st - IPv6-in-Ipv6 static tunnel, ip4au - … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.27 | ColumnwfIpv6IfIPv4TunnelLocalAddress | read-write | mandatory | If wfIpv6IfCircuit is zero and the tunnel protocol type is IPv4 or ip4sa, this parameter contains the local IPv4 address of this interface's tunnel. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.28 | ColumnwfIpv6IfIPv4TunnelRemoteAddress | read-write | mandatory | If wfIpv6IfCircuit is zero and the tunnel protocol type is IPv4 or ip4sa, this parameter contains the remote IPv4 address of this interface's tunnel. If this a… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.29 | ColumnwfIpv6IfIpv6TunnelIfIndex | read-write | mandatory | If wfIpv6IfCircuit is zero and the tunnel protocol type is IPv6 or ip6sa, this parameter contains the IPv6 interface index of the local end of this interface's… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.30 | ColumnwfIpv6IfIpv6TunnelRemoteAddress | read-write | mandatory | If wfIpv6IfCircuit is zero and the tunnel protocol type is IPv6 or ip6sa, this parameter contains the remote IPv6 address of this interface's tunnel. If this a… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3 | TablewfIpv6AddrPrefixTable | not-accessible | mandatory | The list of IPv6 address prefixes of IPv6 interfaces. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1 | RowwfIpv6AddrPrefixEntry | not-accessible | mandatory | An interface entry containing objects of a particular IPv6 address prefix. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.1 | ColumnwfIpv6AddrPrefixDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete this prefix entry. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.2 | ColumnwfIpv6AddrPrefixDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable the use of a given prefix. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.3 | ColumnwfIpv6AddrPrefixIfIndex | read-only | mandatory | The index value which uniquely identifies the IPv6 interface to which this entry is applicable. The interface identified by a particular value of this index is… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.4 | ColumnwfIpv6AddrPrefixIndex | read-only | mandatory | A index value identifying this prefix on the IPv6 interface to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.5 | ColumnwfIpv6AddrPrefix | read-write | mandatory | The prefix associated with the IPv6 address of this interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.6 | ColumnwfIpv6AddrPrefixLength | read-write | mandatory | The length of the prefix (in bits) associated with the IPv6 address of this entry. A prefix can not be shorter than 3 bits. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.7 | ColumnwfIpv6AddrPrefixPreference | read-write | mandatory | The Routing Preference in 0 to 15 range. A value of 15 is `most preferred'. Default 15. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.8 | ColumnwfIpv6AddrPrefixCost | read-write | mandatory | The Cost metric associated with this entry. (Used as the RIP metric) |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.9 | ColumnwfIpv6AddrPrefixOnLinkFlag | read-write | mandatory | On-link flag. When set (1), indicates that this prefix can be used for on-link determination. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.10 | ColumnwfIpv6AddrPrefixAutonomousFlag | read-write | mandatory | Autonomous address configuration flag. When set (1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a lo… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.11 | ColumnwfIpv6AddrPrefixAdvPreferredLifetime | read-write | mandatory | The value to be placed in the Preferred Lifetime field in the Prefix Information option of Router Advertisements. It is the length of time in seconds (relative… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.12 | ColumnwfIpv6AddrPrefixAdvValidLifetime | read-write | mandatory | The value to be placed in the Valid Lifetime field in the Prefix Information option of Router Advertisements. It is the length of time in seconds (relative to … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.13 | ColumnwfIpv6AddrPrefixInvalid | read-only | mandatory | Whether this entry is valid or not: valid - usable prefix, invalid - misconfigured. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1.14 | ColumnwfIpv6AddrPrefixAnycast | read-only | mandatory | Whether this prefix is an anycast address prefix: true - anycast address prefix, false - unicast address prefix. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.4 | TablewfIpv6AddrTable | not-accessible | mandatory | The table of addressing information relevant to this node's interface addresses. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.4.1 | RowwfIpv6AddrEntry | not-accessible | mandatory | The addressing information for one of this node's interface addresses. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.4.1.1 | ColumnwfIpv6AddrIfIndex | read-only | mandatory | The index value which uniquely identifies the IPv6 interface to which this entry is applicable. The interface identified by a particular value of this index is… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.4.1.2 | ColumnwfIpv6AddrAddress | read-only | mandatory | The IPv6 address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.4.1.3 | ColumnwfIpv6AddrPfxLength | read-only | mandatory | The length of the prefix (in bits) associated with the IPv6 address of this entry. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.4.1.4 | ColumnwfIpv6AddrType | read-only | mandatory | The type of address. Note that 'stateless(2)' refers to an address that was statelessly autoconfigured; 'stateful(3)' refers to a address which was acquired by… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.4.1.5 | ColumnwfIpv6AddrAnycastFlag | read-only | mandatory | This object has the value 'true(1)', if this address is an anycast address and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.4.1.6 | ColumnwfIpv6AddrStatus | read-only | mandatory | Address status. The preferred(1) state indicates that this is a valid address that can appear as the destination or source address of a packet. The deprecated(… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5 | TablewfIpv6IfStatsTable | not-accessible | mandatory | IPv6 interface statistics |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1 | RowwfIpv6IfStatsEntry | not-accessible | mandatory | An interface statistics entry containing objects at a particular IPv6 interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.1 | ColumnwfIpv6IfStatsIfIndex | read-only | mandatory | The index value which uniquely identifies the IPv6 interface to which this entry is applicable. The interface identified by a particular value of this index is… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.2 | ColumnwfIpv6IfStatsInReceives | read-only | mandatory | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.3 | ColumnwfIpv6IfStatsInHdrErrors | read-only | mandatory | The number of input datagrams discarded due to errors in their IPv6 headers, including version number mismatch, other format errors, hop count exceeded, errors… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.4 | ColumnwfIpv6IfStatsInTooBigErrors | read-only | mandatory | The number of input datagrams that could not be forwarded because their size exceeded the link MTU of outgoing interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.5 | ColumnwfIpv6IfStatsInNoRoutes | read-only | mandatory | The number of input datagrams discarded because no route could be found to transmit them to their destination. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.6 | ColumnwfIpv6IfStatsInAddrErrors | read-only | mandatory | The number of input datagrams discarded because the IPv6 address in their IPv6 header's destination field was not a valid address to be received at this entity… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.7 | ColumnwfIpv6IfStatsInUnknownProtos | read-only | mandatory | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.8 | ColumnwfIpv6IfStatsInDiscards | read-only | mandatory | The number of input IPv6 datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of bu… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.9 | ColumnwfIpv6IfStatsInDelivers | read-only | mandatory | The total number of input datagrams successfully delivered to IPv6 user-protocols (including ICMP). |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.10 | ColumnwfIpv6IfStatsForwDatagrams | read-only | mandatory | The number of output datagrams which this entity received and forwarded to their final destinations. In entities which do not act as IPv6 routers, this counter… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.11 | ColumnwfIpv6IfStatsOutRequests | read-only | mandatory | The total number of IPv6 datagrams which local IPv6 user-protocols (including ICMP) supplied to IPv6 in requests for transmission. Note that this counter does … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.12 | ColumnwfIpv6IfStatsOutDiscards | read-only | mandatory | The number of output IPv6 datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., fo… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.13 | ColumnwfIpv6IfStatsFragOKs | read-only | mandatory | The number of IPv6 datagrams that have been successfully fragmented at this output interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.14 | ColumnwfIpv6IfStatsFragFails | read-only | mandatory | The number of IPv6 datagrams that have been discarded because they needed to be fragmented at this output interface but could not be. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.15 | ColumnwfIpv6IfStatsFragCreates | read-only | mandatory | The number of output datagram fragments that have been generated as a result of fragmentation at this output interface. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.16 | ColumnwfIpv6IfStatsCacheMisses | read-only | mandatory | The number of FFT cache misses (i.e how many times did the cache gate have to do a look up in the RNP because the FFT didn't have the destination network |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.17 | ColumnwfIpv6IfStatsCacheNetworks | read-only | mandatory | The number of network entries in the forwarding cache |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.18 | ColumnwfIpv6IfStatsCacheRemoves | read-only | mandatory | The number of networks which have been flushed from the forwarding cache |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.19 | ColumnwfIpv6IfStatsReasmReqds | read-only | mandatory | The number of IPv6 fragments received which needed to be reassembled at this interface. Note that this counter is incremented at the interface to which these f… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.20 | ColumnwfIpv6IfStatsReasmOKs | read-only | mandatory | The number of IPv6 datagrams successfully reassembled. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.21 | ColumnwfIpv6IfStatsReasmFails | read-only | mandatory | The number of failures detected by the IPv6 re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.22 | ColumnwfIpv6IfStatsMcastInPkts | read-only | mandatory | The number of multicast packets received by the interface |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.23 | ColumnwfIpv6IfStatsMcastOutPkts | read-only | mandatory | The number of multicast packets transmitted by the interface |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1.24 | ColumnwfIpv6IfStatsInTruncatedPkts | read-only | mandatory | The number of input datagrams discarded because datagram frame didn't carry enough data |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6 | TablewfIpv6StaticRouteTable | not-accessible | mandatory | The list of static routes |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1 | RowwfIpv6StaticRouteEntry | not-accessible | mandatory | A static route definition |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.1 | ColumnwfIpv6StaticRouteDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete the IPv6 Static Route. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.2 | ColumnwfIpv6StaticRouteDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable this IPv6 Static Route. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.3 | ColumnwfIpv6StaticRouteIfIndex | read-only | mandatory | The index value which uniquely identifies the local IPv6 interface to be used for forwarding to this Next Hop. The interface identified by a particular value o… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.4 | ColumnwfIpv6StaticRouteId | read-only | mandatory | The Route Identifier: which numbered route this is to be |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.5 | ColumnwfIpv6StaticRoutePfx | read-write | mandatory | The destination IPv6 address prefix of this static route |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.6 | ColumnwfIpv6StaticRoutePfxLength | read-write | mandatory | The length (in bits) of the address prefix for this static route |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.7 | ColumnwfIpv6StaticRouteNextHopAddr | read-write | mandatory | The IPv6 Address of the next hop node. This parameter is ignored for black-hole static routes. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.8 | ColumnwfIpv6StaticRoutePreference | read-write | mandatory | The Routing Preference in 0 to 15 range. A value of 15 is 'most preferred'. Default 15. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.9 | ColumnwfIpv6StaticRouteCost | read-write | mandatory | The Cost of this Static Route. (Used as the RIP metric) |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.10 | ColumnwfIpv6StaticRouteInvalid | read-only | mandatory | Whether this Static Route is valid or not |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7 | TablewfIpv6AdjacentNodeTable | not-accessible | mandatory | The list of Adjacent Static Nodes (static IPv6->MAC resolutions) |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1 | RowwfIpv6AdjacentNodeEntry | not-accessible | mandatory | A description of an adjacent node |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1.1 | ColumnwfIpv6AdjNodeDelete | read-write | mandatory | Whether to Delete this Adjacent Node |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1.2 | ColumnwfIpv6AdjNodeDisable | read-write | mandatory | Whether to Disable this Adjacent Node |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1.3 | ColumnwfIpv6AdjNodeAddress | read-only | mandatory | The IPv6 address of this Adjacent Node |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1.4 | ColumnwfIpv6AdjNodeIfIndex | read-only | mandatory | The index value which uniquely identifies the local IPv6 interface through which this Adjacent Node should be reached. The interface identified by a particular… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1.5 | ColumnwfIpv6AdjNodePhysicalAddr | read-write | mandatory | The Physical Address for this Adjacent Node. For FR PVC it is a 32 bit DLCI. For ATM PVC it is a 32 bit VCID which has circuit VCI in its most significant 20 b… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1.6 | ColumnwfIpv6AdjNodeEncaps | read-write | mandatory | The link layer encapsulation type of this entry. 'Snap(2)' is to be specified only if IEEE 802.2 encapsulation is to be used over CSMACD or DS1 links. For 'pdn… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1.7 | ColumnwfIpv6AdjNodePreference | read-write | mandatory | The Routing Preference in 0 to 15 range. A value of 15 is 'most preferred'. Default 15. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1.8 | ColumnwfIpv6AdjNodeCost | read-write | mandatory | The Cost of this Adjacent Node. (Used as the RIP metric) |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1.9 | ColumnwfIpv6AdjNodeInvalid | read-only | mandatory | Whether the record passed validation or not |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1.10 | ColumnwfIpv6AdjNodeWanAddr | read-write | mandatory | WAN address (X.121, E.164, etc.) used to establish an SVC to the adjacent host. For X.25 PVC it contains LCN of the PVC encoded as a X.121 address uo to 4 octe… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8 | TablewfIpv6RouteTable | not-accessible | mandatory | IPv6 Routing table |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1 | RowwfIpv6RouteEntry | not-accessible | mandatory | A routing entry |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.1 | ColumnwfIpv6RouteDest | read-only | mandatory | The destination IPv6 address of this route. An entry with a value of ::0 is considered a default route. This object may not take a Multicast address value. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.2 | ColumnwfIpv6RoutePfxLength | read-only | mandatory | Indicates the prefix length of the destination address. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.3 | ColumnwfIpv6RouteIfIndex | read-only | mandatory | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.4 | ColumnwfIpv6RouteIndex | read-only | mandatory | The value which uniquely identifies the route among the routes to the same network layer destination |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.5 | ColumnwfIpv6RouteNextHop | read-only | mandatory | On remote routes, the address of the next system en route; Otherwise, ::0 |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.6 | ColumnwfIpv6RouteType | read-only | mandatory | The type of route. Note that 'direct(3)' refers to a route for which the next hop is the final destination; 'indirect(4)' refers to a route for which the next … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.7 | ColumnwfIpv6RouteProtocol | read-only | mandatory | The routing mechanism via which this route was learned. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.8 | ColumnwfIpv6RoutePolicy | read-only | mandatory | The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unle… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.9 | ColumnwfIpv6RouteAge | read-only | mandatory | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.10 | ColumnwfIpv6RouteNextHopRDI | read-only | mandatory | The Routing Domain ID of the Next Hop. When this is unknown or not relevant to the protocol indicated by ipv6RouteProtocol, it is an octet string of zero size. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.11 | ColumnwfIpv6RouteMetric | read-only | mandatory | The routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipv6RouteProtocol value. When t… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.12 | ColumnwfIpv6RouteWeight | read-only | mandatory | The system internal weight value for this route. The semantics of this value are determined by the implementation specific rules. Generally, within routes with… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.13 | ColumnwfIpv6RouteInfo | read-only | mandatory | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.9 | TablewfIpv6NetToMediaEntryTable | not-accessible | mandatory | The IPv6 address translation table contain the IPv6 Address to `physical' address equivalences. Some interfaces do not use translation tables for determining a… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.9.1 | RowwfIpv6NetToMediaEntry | not-accessible | mandatory | A description of a resolved node |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.9.1.1 | ColumnwfIpv6NetToMediaIfIndex | read-only | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.9.1.2 | ColumnwfIpv6NetToMediaNetAddress | read-only | mandatory | The IPv6 Address corresponding to the media-dependent `physical' address. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.9.1.3 | ColumnwfIpv6NetToMediaPhysAddress | read-only | mandatory | The media-dependent `physical' address. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.9.1.4 | ColumnwfIpv6NetToMediaType | read-only | mandatory | The type of mapping. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.9.1.5 | ColumnwfIpv6NetToMediaInvalid | read-write | mandatory | Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the wfIpv6NetToMediaTable. That is, it effectively disass… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.10 | TablewfIpv6DbgInfoTable | not-accessible | mandatory | The debug info table |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.10.1 | RowwfIpv6DbgInfoEntry | not-accessible | mandatory | A description of a IPV6_NDISC interface |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.10.1.1 | ColumnwfIpv6DbgInfoSlot | read-only | mandatory | Slot number of this information. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.10.1.2 | ColumnwfIpv6DbgInfoState | read-only | mandatory | The current state of IPv6 on this slot. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.10.1.3 | ColumnwfIpv6DbgInfoNetworks | read-only | mandatory | The number of network layer reachability entries in the routing table on this slot |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.10.1.4 | ColumnwfIpv6DbgInfoNodes | read-only | mandatory | This parameter indicates the number of nodes known by IPv6 on this slot. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.10.1.5 | ColumnwfIpv6DbgInfoActiveInterfaces | read-only | mandatory | The number of active IPv6 interface on this slot. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.10.1.6 | ColumnwfIpv6DbgInfoRtmAddr | read-only | mandatory | Memory address of IPv6 RTM Environment on this slot. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11 | TablewfIpv6FilterTable | not-accessible | mandatory | IPv6 Traffic Filters |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1 | RowwfIpv6FilterEntry | not-accessible | mandatory | A filtering rule |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.1 | ColumnwfIpv6FilterDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IPv6 filtering rule. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.2 | ColumnwfIpv6FilterDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IPv6 filtering rule. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.3 | ColumnwfIpv6FilterNumber | read-only | mandatory | Filter rule number |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.4 | ColumnwfIpv6FilterName | read-write | mandatory | Rule name - user specified name for this filter |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.5 | ColumnwfIpv6FilterPrecedence | read-write | mandatory | Precedence. This is a metric to be used to compare this policy rule to other rules that a given packet may match. A rule with a higher precedence value will be… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.6 | ColumnwfIpv6FilterPackets | read-only | mandatory | The number of packets received that have matched this rule. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.7 | ColumnwfIpv6FilterOctets | read-only | mandatory | The total number of octets in packets received that have matched this rule. |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.8 | ColumnwfIpv6FilterInIfIndex | read-write | mandatory | Interface index which uniquely identifies the incoming IPv6 interface to which this entry is applicable. An interface identified by a particular value in this … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.9 | ColumnwfIpv6FilterOutIfIndex | read-write | mandatory | Interface index which uniquely identifies the outgoing IPv6 interface to which this entry is applicable. An interface identified by a particular value in this … |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.10 | ColumnwfIpv6FilterSrcAddresses | read-write | mandatory | Source Address identification list. This identifies which packet source addresses will match this rule. If non-null, the octet string contains one or more 2-tu… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.11 | ColumnwfIpv6FilterDstAddresses | read-write | mandatory | Destination Address identification list. This identifies which packet destination addresses will match this rule. If non-null, the octet string contains one or… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.12 | ColumnwfIpv6FilterProtocols | read-write | mandatory | List of upper layer protocol types (e.g., UDP is 16, TCP is 6, ICMP is 58) of the packet payload. If non-null, the octet string contains one or more 3-tuples o… |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.13 | ColumnwfIpv6FilterAction | read-write | mandatory | action. If 'forward(1), packet is to be forwarded; if 'discard(2)', packet is to be discarded |
| 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1.14 | ColumnwfIpv6FilterLog | read-write | mandatory | Log Action. If 'true(1), a log event is generated when a packet matches this filter rule; if 'false(2)', no logging is done. |
| 1.3.6.1.4.1.18.3.5.3.16.2 | NodewfIpv6IcmpGroup | |||
| 1.3.6.1.4.1.18.3.5.3.16.2.1 | TablewfIpv6IcmpTable | not-accessible | mandatory | IPv6 ICMP statistics |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1 | RowwfIpv6IcmpEntry | not-accessible | mandatory | An ICMPv6 statistics entry containing objects at a particular IPv6 interface. Note that a receiving interface is the interface to which a given ICMPv6 message … |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.1 | ColumnwfIpv6IcmpIfIndex | read-only | mandatory | The index value which uniquely identifies the local interface to which this entry's information pertains. The interface identified by a particular value of thi… |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.2 | ColumnwfIpv6IcmpInMsgs | read-only | mandatory | The total number of ICMP messages which includes all those counted by wfIpv6IcmpInErrors. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.3 | ColumnwfIpv6IcmpInErrors | read-only | mandatory | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.4 | ColumnwfIpv6IcmpInDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.5 | ColumnwfIpv6IcmpInAdminProhibs | read-only | mandatory | Number of ICMP dest unreachable/communication administratively prohibited messages received. Note: may be sent by BFE or another system |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.6 | ColumnwfIpv6IcmpInTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.7 | ColumnwfIpv6IcmpInParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.8 | ColumnwfIpv6IcmpInPktTooBigs | read-only | mandatory | The number of ICMP Packet Too Big messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.9 | ColumnwfIpv6IcmpInEchos | read-only | mandatory | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.10 | ColumnwfIpv6IcmpInEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.11 | ColumnwfIpv6IcmpInRouterSolicits | read-only | mandatory | The number of ICMP Router Solicit messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.12 | ColumnwfIpv6IcmpInRouterAdvertisements | read-only | mandatory | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.13 | ColumnwfIpv6IcmpInNeighborSolicits | read-only | mandatory | The number of ICMP Neighbor Solicit messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.14 | ColumnwfIpv6IcmpInNeighborAdvertisements | read-only | mandatory | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.15 | ColumnwfIpv6IcmpInRedirects | read-only | mandatory | The number of Redirect messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.16 | ColumnwfIpv6IcmpInGroupMembQueries | read-only | mandatory | The number of ICMPv6 Group Membership Query messages received by the interface. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.17 | ColumnwfIpv6IcmpInGroupMembResponses | read-only | mandatory | The number of ICMPv6 Group Membership Response messages received by the interface. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.18 | ColumnwfIpv6IcmpInGroupMembReductions | read-only | mandatory | The number of ICMPv6 Group Membership Reduction messages received by the interface. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.19 | ColumnwfIpv6IcmpOutMsgs | read-only | mandatory | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.20 | ColumnwfIpv6IcmpOutErrors | read-only | mandatory | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.21 | ColumnwfIpv6IcmpOutDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.22 | ColumnwfIpv6IcmpOutAdminProhibs | read-only | mandatory | Number of ICMP dest unreachable/communication administratively prohibited messages sent. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.23 | ColumnwfIpv6IcmpOutTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.24 | ColumnwfIpv6IcmpOutParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.25 | ColumnwfIpv6IcmpOutPktTooBigs | read-only | mandatory | The number of ICMP Packet Too Big messages sent. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.26 | ColumnwfIpv6IcmpOutEchos | read-only | mandatory | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.27 | ColumnwfIpv6IcmpOutEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.28 | ColumnwfIpv6IcmpOutRouterSolicits | read-only | mandatory | The number of ICMP Router Solicitation messages sent. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.29 | ColumnwfIpv6IcmpOutRouterAdvertisements | read-only | mandatory | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.30 | ColumnwfIpv6IcmpOutNeighborSolicits | read-only | mandatory | The number of ICMP Neighbor Solicitation messages sent. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.31 | ColumnwfIpv6IcmpOutNeighborAdvertisements | read-only | mandatory | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.32 | ColumnwfIpv6IcmpOutRedirects | read-only | mandatory | The number of Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.33 | ColumnwfIpv6IcmpOutGroupMembQueries | read-only | mandatory | The number of ICMPv6 Group Membership Query messages sent |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.34 | ColumnwfIpv6IcmpOutGroupMembResponses | read-only | mandatory | The number of ICMPv6 Group Membership Response messages sent |
| 1.3.6.1.4.1.18.3.5.3.16.2.1.1.35 | ColumnwfIpv6IcmpOutGroupMembReductions | read-only | mandatory | The number of ICMPv6 Group Membership Reduction messages sent |
| 1.3.6.1.4.1.18.3.5.3.16.3 | NodewfIpv6NDiscGroup | |||
| 1.3.6.1.4.1.18.3.5.3.16.3.1 | TablewfIpv6NdiscIfTable | not-accessible | mandatory | The list of configured Neighbor Discovery (ND) interfaces |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1 | RowwfIpv6NdiscIfEntry | not-accessible | mandatory | A description of a IPV6_NDISC interface |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.1 | ColumnwfIpv6NdiscIfDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IPV6_NDISC Interface instance. |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.2 | ColumnwfIpv6NdiscIfDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a IPV6_NDISC interface. |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.3 | ColumnwfIpv6NdiscIfState | read-only | mandatory | The current state of IPV6_NDISC on this interface. |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.4 | ColumnwfIpv6NdiscIfIndex | read-only | mandatory | The index value which uniquely identifies the local interface to which this entry's information pertains. The interface identified by a particular value of thi… |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.5 | ColumnwfIpv6NdiscIfSendAdvertisements | read-write | mandatory | Indicates whether or not periodic Router Advertisements are to be sent. |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.6 | ColumnwfIpv6NdiscIfManagedFlag | read-write | mandatory | Managed Address Configuration flag. When set, hosts use the administered (stateful) protocol for address autoconfiguration in addition to any addresses autocon… |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.7 | ColumnwfIpv6NdiscIfOtherCfgFlag | read-write | mandatory | Other Stateful Configuration flag. When set, hosts use the administered (stateful) protocol for autoconfiguration of non-address information. |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.8 | ColumnwfIpv6NdiscIfReachableTime | read-write | mandatory | The time, in milliseconds, that a node assumes a neighbor is reachable after having received a reachability confirmation. A value of zero means unspecified (by… |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.9 | ColumnwfIpv6NdiscIfRetransTimer | read-write | mandatory | The time, in milliseconds, between retransmitted Neighbor Solicitation messages. A value of zero means unspecified (by this router). |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.10 | ColumnwfIpv6NdiscIfMaxHopLimit | read-write | mandatory | Maximum hop limit (network diameter) to advertise |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.11 | ColumnwfIpv6NdiscIfMinRtrAdvInterval | read-write | mandatory | The minimum time allowed between sending unsolicited multicast Router Advertisements, in seconds. |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.12 | ColumnwfIpv6NdiscIfMaxRtrAdvInterval | read-write | mandatory | The maximum time allowed between sending unsolicited multicast Router Advertisements, in seconds. |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.13 | ColumnwfIpv6NdiscIfDefaultLifetime | read-write | mandatory | The lifetime associated with the default router in units of seconds. |
| 1.3.6.1.4.1.18.3.5.3.16.3.1.1.14 | ColumnwfIpv6NdiscIfDupAddrDetectTransmits | read-write | mandatory | The number of consecutive Neighbor Solicitations messages sent while performing Duplicate Address Detection on a tentative address. A value of zero indicates t… |
| 1.3.6.1.4.1.18.3.5.3.16.4 | NodewfIpv6UdpGroup | |||
| 1.3.6.1.4.1.18.3.5.3.16.4.1 | NodewfIpv6Udp | |||
| 1.3.6.1.4.1.18.3.5.3.16.4.1.1 | ScalarwfIpv6UdpInDatagrams | read-only | mandatory | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.4.1.18.3.5.3.16.4.1.2 | ScalarwfIpv6UdpNoPorts | read-only | mandatory | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.4.1.18.3.5.3.16.4.1.3 | ScalarwfIpv6UdpInErrors | read-only | mandatory | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.4.1.18.3.5.3.16.4.1.4 | ScalarwfIpv6UdpOutDatagrams | read-only | mandatory | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.4.1.18.3.5.3.16.4.2 | TablewfIpv6UdpTable | not-accessible | mandatory | The UDP listener table contains information about this entity's UDP end-points on which a local application is currently accepting datagrams. |
| 1.3.6.1.4.1.18.3.5.3.16.4.2.1 | RowwfIpv6UdpEntry | not-accessible | mandatory | Information about a particular current UDP listener. |
| 1.3.6.1.4.1.18.3.5.3.16.4.2.1.1 | ColumnwfIpv6UdpLocalIfIndex | read-only | mandatory | The index value which uniquely identifies the local interface to which this entry's information pertains. The interface identified by a particular value of thi… |
| 1.3.6.1.4.1.18.3.5.3.16.4.2.1.2 | ColumnwfIpv6UdpLocalAddress | read-only | mandatory | The local IPv6 address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IPv6 address associated with the inter… |
| 1.3.6.1.4.1.18.3.5.3.16.4.2.1.3 | ColumnwfIpv6UdpLocalPort | read-only | mandatory | The local port value |
| 1.3.6.1.4.1.18.3.5.3.16.5 | NodewfIpv6LogGroup | |||
| 1.3.6.1.4.1.18.3.5.3.16.5.1 | NodewfIpv6Log | |||
| 1.3.6.1.4.1.18.3.5.3.16.5.1.1 | ScalarwfIpv6LogDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete wfIpv6Log mib object. |
| 1.3.6.1.4.1.18.3.5.3.16.5.1.2 | ScalarwfIpv6LogDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. |
| 1.3.6.1.4.1.18.3.5.3.16.5.1.3 | ScalarwfIpv6LogLevel | read-write | mandatory | BGP log event level. Setting log to a specific level enables logging IPv6 events of this level and higher. |
| 1.3.6.1.4.1.18.3.5.3.16.5.1.4 | ScalarwfIpv6LogEvent | read-write | mandatory | Indicates whether a log message which corresponds to the value of this attributes should be sent to the log. It affects wfIpv6LogCodes only. In order to save c… |
| 1.3.6.1.4.1.18.3.5.3.16.5.1.5 | ScalarwfIpv6LogEventDisable | read-write | mandatory | Indicates whether a log event defined in wfIpv6LogEvent is to be logged. |
| 1.3.6.1.4.1.18.3.5.3.16.5.1.6 | ScalarwfIpv6LogEvents | read-only | mandatory | Vector of enabled debug messages (to check only). Messages are identified via the string of bits contained within this attribute. The first octet contains bits… |
| 1.3.6.1.4.1.18.3.5.3.16.5.1.7 | ScalarwfIpv6LogCfgEvents | read-write | mandatory | User-defined vector of enabled debug messages at boot moment. Coded as instance above |
| 1.3.6.1.4.1.18.3.5.3.16.6 | NodewfIpv6PolicyGroup |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Ipv6Address | OCTET STRING (SIZE (16)) | ||
| Ipv6AddressPrefix | OCTET STRING (SIZE (0..16)) |