Wellfleet-MCT1-MIB
160 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.8.1 | TablewfMcT1ModTable | not-accessible | mandatory | MCT1 MOD record - Contains MCT1 module Configuration parameters |
| 1.3.6.1.4.1.18.3.4.8.1.1 | RowwfMcT1ModEntry | not-accessible | mandatory | An entry in the MCT1 Base table |
| 1.3.6.1.4.1.18.3.4.8.1.1.1 | ColumnwfMcT1ModDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.8.1.1.2 | ColumnwfMcT1ModDisable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.8.1.1.3 | ColumnwfMcT1ModSlot | read-only | mandatory | Instance ID slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.1.1.4 | ColumnwfMcT1ModPrimaryClock | read-write | mandatory | Specifies the primary source for T1 transmit timing. Both T1 ports use the same T1 transmit timing source. The options for T1 timing source are internal timing… |
| 1.3.6.1.4.1.18.3.4.8.1.1.5 | ColumnwfMcT1ModSecondaryClock | read-write | mandatory | Specifies the secondary source for T1 transmit timing. During normal operation T1 transmit timing is derived from the primary timing source. If the primary tim… |
| 1.3.6.1.4.1.18.3.4.8.1.1.6 | ColumnwfMcT1ModCurrentClock | read-only | mandatory | Indicates the clock source currently in use |
| 1.3.6.1.4.1.18.3.4.8.1.1.7 | ColumnwfMcT1ModExtClockOperational | read-only | mandatory | Indicates whether the External clock is operational |
| 1.3.6.1.4.1.18.3.4.8.1.1.8 | ColumnwfMcT1ModLoop0ClockOperational | read-only | mandatory | Indicates whether the timing source from port 1 is operational |
| 1.3.6.1.4.1.18.3.4.8.1.1.9 | ColumnwfMcT1ModLoop1ClockOperational | read-only | mandatory | Indicates whether the timing source from port 2 is operational |
| 1.3.6.1.4.1.18.3.4.8.1.1.10 | ColumnwfMcT1ModRestart | read-write | mandatory | Indicates Module gate should be restarted to read new configuration |
| 1.3.6.1.4.1.18.3.4.8.2 | TablewfMcT1Table | not-accessible | mandatory | MCT1 line record - Contains MUNICH32 Configuration parameters |
| 1.3.6.1.4.1.18.3.4.8.2.1 | RowwfMcT1Entry | not-accessible | mandatory | An entry in the MCT1 table |
| 1.3.6.1.4.1.18.3.4.8.2.1.1 | ColumnwfMcT1Delete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.8.2.1.2 | ColumnwfMcT1Disable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.8.2.1.3 | ColumnwfMcT1State | read-only | mandatory | Line Driver state variable |
| 1.3.6.1.4.1.18.3.4.8.2.1.4 | ColumnwfMcT1Slot | read-only | mandatory | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.2.1.5 | ColumnwfMcT1Connector | read-only | mandatory | Instance ID Connector, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.2.1.6 | ColumnwfMcT1OperationMode | read-write | mandatory | An option to generate and analyze specific test patterns is provided in BERT mode of operation. Only one T1 port can be in BERT mode at a time. This attribute … |
| 1.3.6.1.4.1.18.3.4.8.2.1.7 | ColumnwfMcT1Mtu | read-write | mandatory | MTU parameter. Specifies the largest frame size that can be received by the MCT1 link module. Any received frame which is larger than the MTU will be discarded. |
| 1.3.6.1.4.1.18.3.4.8.2.1.8 | ColumnwfMcT1MunichVersion | read-only | mandatory | Specifies version number of the MUNICH chip used |
| 1.3.6.1.4.1.18.3.4.8.2.1.9 | ColumnwfMcT1Dsx1LineType | read-write | mandatory | Selects between the two framing formats supported - D4 and ESF. The sailent differences between the two formats are the number of frames per superframe and the… |
| 1.3.6.1.4.1.18.3.4.8.2.1.10 | ColumnwfMcT1Dsx1ZeroCoding | read-write | mandatory | Selects between the two Zero Code Suppression formats used on the link. In B8ZS coding, any outgoing stream of eight consecutive zeroes is replaced with a B8ZS… |
| 1.3.6.1.4.1.18.3.4.8.2.1.11 | ColumnwfMcT1Dsx1LoopbackConfig | read-only | mandatory | Indicates the loopback configuration of the T1 interface. The interface can be in the following loopback states: Payload loopback and Line loopback or no loopb… |
| 1.3.6.1.4.1.18.3.4.8.2.1.12 | ColumnwfMcT1Dsx1LineStatus | read-only | mandatory | Indicates the line status of the T1 interface. It contains loopback state and alarm state information. The Dsx1LineStatus is a bit map therefore it can represe… |
| 1.3.6.1.4.1.18.3.4.8.2.1.13 | ColumnwfMcT1Dsx1SetupAlarmThreshold | read-write | mandatory | Specifies setup time for performance failure conditions, in seconds. When a performance defect is present for greater than the time specified by this parameter… |
| 1.3.6.1.4.1.18.3.4.8.2.1.14 | ColumnwfMcT1Dsx1ClearAlarmThreshold | read-write | mandatory | Specifies clear time for performance failure conditions, in seconds. When a performance failure condition has been cleared for greater than the time specified … |
| 1.3.6.1.4.1.18.3.4.8.2.1.15 | ColumnwfMcT1Dsx1SignalLevel | read-write | mandatory | Specifies T1 transmit power level, in terms of DB. They translate into cable length as follows: 0.0dB -> 0-133 ft 0.5dB -> 133-266 ft 0.8dB -> 266-399 ft 1.1dB… |
| 1.3.6.1.4.1.18.3.4.8.2.1.16 | ColumnwfMcT1LoopbackDisable | read-write | mandatory | The MCT1 link module is capable of detecting loop up and loop down codes received from the far end. This parameter enables or disbales loop up/down code detect… |
| 1.3.6.1.4.1.18.3.4.8.2.1.17 | ColumnwfMcT1Dsx1FDLOperationMode | read-write | mandatory | Select between the two FDL modes of operation. The AT&T mode, 54016 is based on AT&T publication 54015-1989. The ANSI mode, T1403 is based on ANSI publication … |
| 1.3.6.1.4.1.18.3.4.8.2.1.18 | ColumnwfMcT1BertTxOutputLevel | read-write | mandatory | Specifies T1 transmit power level, in terms of DB while the T1 port is in BERT mode. The power levels translate into cable length as follows: 0.0dB -> 0-133 ft… |
| 1.3.6.1.4.1.18.3.4.8.2.1.19 | ColumnwfMcT1BertTestMode | read-write | mandatory | Selects between the framing formats while in bert mode of operation. |
| 1.3.6.1.4.1.18.3.4.8.2.1.20 | ColumnwfMcT1BertLineCode | read-write | mandatory | Selects between the two Zero Code Suppression formats used on the link while in BERT mode. In B8ZS coding, any outgoing stream of eight consecutive zeroes is r… |
| 1.3.6.1.4.1.18.3.4.8.2.1.21 | ColumnwfMcT1BertTestPattern | read-write | mandatory | When a T1 port is in BERT mode, it is capable of generating a set of known patterns. This paramater selects between those patterns |
| 1.3.6.1.4.1.18.3.4.8.2.1.22 | ColumnwfMcT1BertSendAlarm | read-write | mandatory | Specifies a blue or yellow alarm to be transmitted while in BERT mode. |
| 1.3.6.1.4.1.18.3.4.8.2.1.23 | ColumnwfMcT1DS2282Version | read-only | mandatory | Specifies version number of DS2282 chip |
| 1.3.6.1.4.1.18.3.4.8.2.1.24 | ColumnwfMcT1Restart | read-write | mandatory | Indicates Port gate should be restarted to read new configuration |
| 1.3.6.1.4.1.18.3.4.8.2.1.25 | ColumnwfMcT1Loopback | read-write | mandatory | Selects line or payload loopback to be activated locally |
| 1.3.6.1.4.1.18.3.4.8.2.1.26 | ColumnwfMcT1FDLTargetAddress | read-write | mandatory | Selects between the two FDL target address modes |
| 1.3.6.1.4.1.18.3.4.8.3 | TablewfMcT1ConfigTable | not-accessible | mandatory | MCT1 configuration record - Contains MUNICH32 and Framer write only Configuration parameters |
| 1.3.6.1.4.1.18.3.4.8.3.1 | RowwfMcT1ConfigEntry | not-accessible | mandatory | An entry in the MCT1 Config table |
| 1.3.6.1.4.1.18.3.4.8.3.1.1 | ColumnwfMcT1ConfigSlot | read-only | mandatory | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.3.1.2 | ColumnwfMcT1ConfigConnector | read-only | mandatory | Instance ID Connector, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.3.1.3 | ColumnwfMcT1BertRestart | read-write | mandatory | Reset counters on BERT device |
| 1.3.6.1.4.1.18.3.4.8.3.1.4 | ColumnwfMcT1BertPayldLb | read-write | mandatory | Selects a payload loopback code to be sent to the far end by the FDL while in BERT mode. It can be a payload loopback activate or deactivate code. |
| 1.3.6.1.4.1.18.3.4.8.3.1.5 | ColumnwfMcT1BertLineLb | read-write | mandatory | Selects a line loopback code to be sent to the far end while in BERT mode. It can be a line loopback activate or deactivate code using the hardware on the MCT1… |
| 1.3.6.1.4.1.18.3.4.8.3.1.6 | ColumnwfMcT1BertErrorInsert | read-write | mandatory | Indicates that an error be injected into the transmitted data stream while in BERT mode. |
| 1.3.6.1.4.1.18.3.4.8.3.1.7 | ColumnwfMcT1Dsx1SendLoopCode | read-write | mandatory | Selects a Loop Up/Down code to be sent to the remote end |
| 1.3.6.1.4.1.18.3.4.8.3.1.8 | ColumnwfMcT1Dsx1SendFDLCode | read-write | mandatory | Selects an FDL code to be sent to the remote end |
| 1.3.6.1.4.1.18.3.4.8.4 | TablewfMcT1LineTable | not-accessible | mandatory | MCT1 Channel record - Contains configuration parameters and statistics for MUNICH32 which are channel specific. |
| 1.3.6.1.4.1.18.3.4.8.4.1 | RowwfMcT1LineEntry | not-accessible | mandatory | An entry in the MCT1CHANNEL table |
| 1.3.6.1.4.1.18.3.4.8.4.1.1 | ColumnwfMcT1LineDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.8.4.1.2 | ColumnwfMcT1LineDisable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.8.4.1.3 | ColumnwfMcT1LineState | read-only | mandatory | Line Driver state variable |
| 1.3.6.1.4.1.18.3.4.8.4.1.4 | ColumnwfMcT1LineSlot | read-only | mandatory | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.4.1.5 | ColumnwfMcT1LineConnector | read-only | mandatory | Instance ID Connector, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.4.1.6 | ColumnwfMcT1LineLine | read-only | mandatory | Line number for this line instance, filled in by driver. The line number corresponds to the position of the circuit, from 1 to 24, on the port. |
| 1.3.6.1.4.1.18.3.4.8.4.1.7 | ColumnwfMcT1LineCct | read-write | mandatory | Circuit number for this line instance |
| 1.3.6.1.4.1.18.3.4.8.4.1.8 | ColumnwfMcT1LineBofl | read-write | mandatory | Selects Breath of Life (BOFL) parameter. If selected, a BOFL packet is sent out on the wire as often as specifies by the wfMcT1LineBoflTmo parameter |
| 1.3.6.1.4.1.18.3.4.8.4.1.9 | ColumnwfMcT1LineBoflTmo | read-write | mandatory | Indicates the time-period between BOFL packets |
| 1.3.6.1.4.1.18.3.4.8.4.1.10 | ColumnwfMcT1LineFractionalLpbk | read-write | mandatory | Any circuit on this T1 port is capable of being put into loopback, i.e. data coming into that circuit from the wire is mirrorred back onto the wire. This param… |
| 1.3.6.1.4.1.18.3.4.8.4.1.11 | ColumnwfMcT1LineChannelAssignment | read-write | mandatory | Lists the time-slots which constitute this channel. User types in a list of time-slots from 1 to 24 separated by commas |
| 1.3.6.1.4.1.18.3.4.8.4.1.12 | ColumnwfMcT1LineMadr | read-only | mandatory | Line MAC address, fixed - line driver fills in from the 48 bit address stored in the serial number prom. |
| 1.3.6.1.4.1.18.3.4.8.4.1.13 | ColumnwfMcT1LineWanProtocol | read-write | mandatory | WAN protocol selection is provided via this parameter. The supported protocols can be selected per circuit. |
| 1.3.6.1.4.1.18.3.4.8.4.1.14 | ColumnwfMcT1LineService | read-write | mandatory | Service type for this circuit. Supports raw HDLC mode. Does not support LLC1 at this time. LLC1 mode will prefix the HDLC address and control fields to the fra… |
| 1.3.6.1.4.1.18.3.4.8.4.1.15 | ColumnwfMcT1LineRateAdaption | read-write | mandatory | Determines the number of bits and their bit positions within the time-slot. 64k selection uses all 8 bits in the time-slot. The two 56k selections use 7 of the… |
| 1.3.6.1.4.1.18.3.4.8.4.1.16 | ColumnwfMcT1LineIFTF | read-write | mandatory | Determines the Interframe time fill character to be transmitted by the MUNICH. In case of IFTF_FLAGS, 0x7E is sent and in case of IFTF_IDLES 0xff is sent as th… |
| 1.3.6.1.4.1.18.3.4.8.4.1.17 | ColumnwfMcT1LineCRCSize | read-write | mandatory | Determines the CRC Size. When CRC32 is selected a 32 bit CRC is appended to the frame being transmitted and a 32 bit CRC check is performed on the received fra… |
| 1.3.6.1.4.1.18.3.4.8.4.1.18 | ColumnwfMcT1LineRxOctets | read-only | mandatory | Number of octets received without error |
| 1.3.6.1.4.1.18.3.4.8.4.1.19 | ColumnwfMcT1LineRxFrames | read-only | mandatory | Number of frames received without error |
| 1.3.6.1.4.1.18.3.4.8.4.1.20 | ColumnwfMcT1LineTxOctets | read-only | mandatory | Number of octets transmitted without error |
| 1.3.6.1.4.1.18.3.4.8.4.1.21 | ColumnwfMcT1LineTxFrames | read-only | mandatory | Number of frames transmitted without error |
| 1.3.6.1.4.1.18.3.4.8.4.1.22 | ColumnwfMcT1LineRxErrors | read-only | mandatory | Number of receive errors |
| 1.3.6.1.4.1.18.3.4.8.4.1.23 | ColumnwfMcT1LineTxErrors | read-only | mandatory | Number of transmission errors |
| 1.3.6.1.4.1.18.3.4.8.4.1.24 | ColumnwfMcT1LineLackRxResources | read-only | mandatory | Number of Rx frames dropped due to lack of buffer resources |
| 1.3.6.1.4.1.18.3.4.8.4.1.25 | ColumnwfMcT1LineLackTxResources | read-only | mandatory | Number of Tx frames dropped due to lack of buffer resources |
| 1.3.6.1.4.1.18.3.4.8.4.1.26 | ColumnwfMcT1LineTxUnderflows | read-only | mandatory | Number of Tx frames dropped due to Transmit underflow |
| 1.3.6.1.4.1.18.3.4.8.4.1.27 | ColumnwfMcT1LineRxOverflows | read-only | mandatory | Number of Rx frames dropped due to Receive overflow |
| 1.3.6.1.4.1.18.3.4.8.4.1.28 | ColumnwfMcT1LineRxNullFrames | read-only | mandatory | Number of short frames received (with no data bytes) |
| 1.3.6.1.4.1.18.3.4.8.4.1.29 | ColumnwfMcT1LineRxShortFrames | read-only | mandatory | Number of short frames received (less than or equal to two data bytes) |
| 1.3.6.1.4.1.18.3.4.8.4.1.30 | ColumnwfMcT1LineRxLossSyncs | read-only | mandatory | Loss of synchronization on receiver |
| 1.3.6.1.4.1.18.3.4.8.4.1.31 | ColumnwfMcT1LineRxCRCErrors | read-only | mandatory | CRC error received |
| 1.3.6.1.4.1.18.3.4.8.4.1.32 | ColumnwfMcT1LineRxNonOctetBits | read-only | mandatory | Non-Octet bits received in frame |
| 1.3.6.1.4.1.18.3.4.8.4.1.33 | ColumnwfMcT1LineRxLongFrames | read-only | mandatory | Frame longer than MFL received |
| 1.3.6.1.4.1.18.3.4.8.4.1.34 | ColumnwfMcT1LineRxAbortFrames | read-only | mandatory | Aborted frame received |
| 1.3.6.1.4.1.18.3.4.8.4.1.35 | ColumnwfMcT1LineRxDescOverflows | read-only | mandatory | Receive overflow on chip buffer |
| 1.3.6.1.4.1.18.3.4.8.4.1.36 | ColumnwfMcT1LineTurboBofl | read-write | mandatory | DEBUG parameter - Turbo bofl enabled or disabled |
| 1.3.6.1.4.1.18.3.4.8.4.1.37 | ColumnwfMcT1LineBoflNum | read-write | mandatory | DEBUG parameter - Number of breath of life packets per breath of life |
| 1.3.6.1.4.1.18.3.4.8.4.1.38 | ColumnwfMcT1LineBoflLen | read-write | mandatory | DEBUG parameter - breath of life packet length |
| 1.3.6.1.4.1.18.3.4.8.4.1.39 | ColumnwfMcT1LineRxIntProcs | read-only | mandatory | Receive Interrupt processing count |
| 1.3.6.1.4.1.18.3.4.8.4.1.40 | ColumnwfMcT1LineTxIntProcs | read-only | mandatory | Tx interrupt processing count |
| 1.3.6.1.4.1.18.3.4.8.4.1.41 | ColumnwfMcT1LineRxPktCorruptions | read-only | mandatory | Corruption check on receive |
| 1.3.6.1.4.1.18.3.4.8.4.1.42 | ColumnwfMcT1LineRxReplenMisses | read-only | mandatory | Count of number of packet buffer misses while attempting to replenish driver receive ring |
| 1.3.6.1.4.1.18.3.4.8.4.1.43 | ColumnwfMcT1LineRxIFCs | read-only | mandatory | Number of times the device changes its interframe time-fill |
| 1.3.6.1.4.1.18.3.4.8.4.1.44 | ColumnwfMcT1LineCfgTxQueueLength | read-write | mandatory | Configured transmit queue length |
| 1.3.6.1.4.1.18.3.4.8.4.1.45 | ColumnwfMcT1LineCfgRxQueueLength | read-write | mandatory | Configured receive queue length |
| 1.3.6.1.4.1.18.3.4.8.4.1.46 | ColumnwfMcT1LineTxQueueLength | read-only | mandatory | Current transmit queue length |
| 1.3.6.1.4.1.18.3.4.8.4.1.47 | ColumnwfMcT1LineRxQueueLength | read-only | mandatory | Current Receive queue length |
| 1.3.6.1.4.1.18.3.4.8.4.1.48 | ColumnwfMcT1LineTxQueueEmpty | read-only | mandatory | The number of times the transmit ring is found empty when transmitting packets |
| 1.3.6.1.4.1.18.3.4.8.4.1.49 | ColumnwfMcT1LineMtu | read-only | mandatory | MTU read-only parameter. Specifies the largest frame size that can be received by the MCT1 link module. Any received frame which is larger than the MTU will be… |
| 1.3.6.1.4.1.18.3.4.8.4.1.50 | ColumnwfMcT1LineRestart | read-write | mandatory | Indicates channel gate should be restarted to read new configuration |
| 1.3.6.1.4.1.18.3.4.8.4.1.51 | ColumnwfMcT1LineLineNumber | read-write | mandatory | line number for this line instance |
| 1.3.6.1.4.1.18.3.4.8.5 | TablewfMcT1Dsx1CurrentTable | not-accessible | mandatory | The MCT1_DSX1 Current table |
| 1.3.6.1.4.1.18.3.4.8.5.1 | RowwfMcT1Dsx1CurrentEntry | not-accessible | mandatory | per circuit MCT1_DSX1 current objects - wfMcT1Dsx1CurrentIndex corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.8.5.1.1 | ColumnwfMcT1Dsx1CurrentSlot | read-only | mandatory | this corresponds to the Wellfleet Slot number |
| 1.3.6.1.4.1.18.3.4.8.5.1.2 | ColumnwfMcT1Dsx1CurrentConnector | read-only | mandatory | this corresponds to the Wellfleet Connector number |
| 1.3.6.1.4.1.18.3.4.8.5.1.3 | ColumnwfMcT1Dsx1CurrentIntervalTimer | read-only | mandatory | the number of seconds in the current 15 minute interval |
| 1.3.6.1.4.1.18.3.4.8.5.1.4 | ColumnwfMcT1Dsx1CurrentESs | read-only | mandatory | the number of errored seconds encountered by a DS1 interface in the current 15 minute interval |
| 1.3.6.1.4.1.18.3.4.8.5.1.5 | ColumnwfMcT1Dsx1CurrentSESs | read-only | mandatory | the number of severely errored seconds in the current 15 minute interval |
| 1.3.6.1.4.1.18.3.4.8.5.1.6 | ColumnwfMcT1Dsx1CurrentBESs | read-only | mandatory | the number of bursty errored seconds in the current 15 minute interval |
| 1.3.6.1.4.1.18.3.4.8.5.1.7 | ColumnwfMcT1Dsx1CurrentUASs | read-only | mandatory | the number of unavailable seconds in the current 15 minute interval |
| 1.3.6.1.4.1.18.3.4.8.5.1.8 | ColumnwfMcT1Dsx1CurrentCSSs | read-only | mandatory | the number of Controlled Slip seconds in the current 15 minute interval |
| 1.3.6.1.4.1.18.3.4.8.5.1.9 | ColumnwfMcT1Dsx1CurrentBPVs | read-only | mandatory | the number of bipolar violations in the current 15 minute interval |
| 1.3.6.1.4.1.18.3.4.8.6 | TablewfMcT1Dsx1IntervalTable | not-accessible | mandatory | The MCT1_DSX1 Interval table |
| 1.3.6.1.4.1.18.3.4.8.6.1 | RowwfMcT1Dsx1IntervalEntry | not-accessible | mandatory | per circuit MCT1_DSX1 interval objects - wfMcT1Dsx1IntervalIndex corresponds to Wellfleet circuit number, wfMcT1Dsx1IntervalNumber is the numbered previous 15-… |
| 1.3.6.1.4.1.18.3.4.8.6.1.1 | ColumnwfMcT1Dsx1IntervalSlot | read-only | mandatory | this corresponds to the Wellfleet Slot number |
| 1.3.6.1.4.1.18.3.4.8.6.1.2 | ColumnwfMcT1Dsx1IntervalConnector | read-only | mandatory | this corresponds to the Wellfleet Connector number |
| 1.3.6.1.4.1.18.3.4.8.6.1.3 | ColumnwfMcT1Dsx1IntervalNumber | read-only | mandatory | 1..96 where 1 is the most recent 15-minute interval and 96 is the least |
| 1.3.6.1.4.1.18.3.4.8.6.1.4 | ColumnwfMcT1Dsx1IntervalESs | read-only | mandatory | the number of errored seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.8.6.1.5 | ColumnwfMcT1Dsx1IntervalSESs | read-only | mandatory | the number of severely errored seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.8.6.1.6 | ColumnwfMcT1Dsx1IntervalBESs | read-only | mandatory | the number of bursty errored seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.8.6.1.7 | ColumnwfMcT1Dsx1IntervalUASs | read-only | mandatory | the number of unavailable seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.8.6.1.8 | ColumnwfMcT1Dsx1IntervalCSSs | read-only | mandatory | the number of controlled slip seconds in the specified interval |
| 1.3.6.1.4.1.18.3.4.8.6.1.9 | ColumnwfMcT1Dsx1IntervalBPVs | read-only | mandatory | the number of bipolar violations in the specified interval |
| 1.3.6.1.4.1.18.3.4.8.7 | TablewfMcT1Dsx1TotalTable | not-accessible | mandatory | The MCT1_DSX1 Total table |
| 1.3.6.1.4.1.18.3.4.8.7.1 | RowwfMcT1Dsx1TotalEntry | not-accessible | mandatory | per circuit MCT1_DSX1 total objects - wfMcT1Dsx1TotalIndex corresponds to Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.4.8.7.1.1 | ColumnwfMcT1Dsx1TotalSlot | read-only | mandatory | this corresponds to the Wellfleet Slot number |
| 1.3.6.1.4.1.18.3.4.8.7.1.2 | ColumnwfMcT1Dsx1TotalConnector | read-only | mandatory | this corresponds to the Wellfleet Connector number |
| 1.3.6.1.4.1.18.3.4.8.7.1.3 | ColumnwfMcT1Dsx1TotalVITR | read-only | mandatory | Indicates the number of valid 15 minute intervals in the previous 24 hour period |
| 1.3.6.1.4.1.18.3.4.8.7.1.4 | ColumnwfMcT1Dsx1TotalESs | read-only | mandatory | The number of errored seconds encountered by the DS1 interface in the previous 24 hour interval |
| 1.3.6.1.4.1.18.3.4.8.7.1.5 | ColumnwfMcT1Dsx1TotalSESs | read-only | mandatory | The number of severely errored seconds encountered by a DS1 interface in the previous 24 hour interval |
| 1.3.6.1.4.1.18.3.4.8.7.1.6 | ColumnwfMcT1Dsx1TotalBESs | read-only | mandatory | The number of bursty errored seconds encountered by a DS1 interface in the previous 24 hour interval |
| 1.3.6.1.4.1.18.3.4.8.7.1.7 | ColumnwfMcT1Dsx1TotalUASs | read-only | mandatory | The number of unavailable seconds encountered by by a DS1 interface in the previous 24 hour interval |
| 1.3.6.1.4.1.18.3.4.8.7.1.8 | ColumnwfMcT1Dsx1TotalCSSs | read-only | mandatory | The number of controlled slip seconds encountered by a DS1 interface in the previous 24 hour interval |
| 1.3.6.1.4.1.18.3.4.8.7.1.9 | ColumnwfMcT1Dsx1TotalBPVs | read-only | mandatory | The number of bipolar violations encountered by a DS1 interface in the previous 24 hour interval |
| 1.3.6.1.4.1.18.3.4.8.8 | TablewfMcT1AnsiTable | not-accessible | mandatory | ANSI Statistics line record - This table contains the performance parameters for the ANSI register set |
| 1.3.6.1.4.1.18.3.4.8.8.1 | RowwfMcT1AnsiEntry | not-accessible | mandatory | An entry in the MCT1 Ansi table |
| 1.3.6.1.4.1.18.3.4.8.8.1.1 | ColumnwfMcT1AnsiSlot | read-only | mandatory | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.8.1.2 | ColumnwfMcT1AnsiConnector | read-only | mandatory | Instance ID Connector, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.8.1.3 | ColumnwfMcT1AnsiCRCCounts | read-only | mandatory | Counts CRC-6 error events |
| 1.3.6.1.4.1.18.3.4.8.8.1.4 | ColumnwfMcT1AnsiBPVCounts | read-only | mandatory | Counts bipolar violations |
| 1.3.6.1.4.1.18.3.4.8.8.1.5 | ColumnwfMcT1AnsiOOFCounts | read-only | mandatory | Counts out-of-frame error events |
| 1.3.6.1.4.1.18.3.4.8.8.1.6 | ColumnwfMcT1AnsiFECounts | read-only | mandatory | Counts errors in the FPS framing pattern |
| 1.3.6.1.4.1.18.3.4.8.8.1.7 | ColumnwfMcT1AnsiESCounts | read-only | mandatory | Counts errorred seconds |
| 1.3.6.1.4.1.18.3.4.8.8.1.8 | ColumnwfMcT1AnsiSESCounts | read-only | mandatory | Counts severly errorred seconds |
| 1.3.6.1.4.1.18.3.4.8.8.1.9 | ColumnwfMcT1AnsiUASCounts | read-only | mandatory | counts unavailable seconds |
| 1.3.6.1.4.1.18.3.4.8.8.1.10 | ColumnwfMcT1AnsiPRMR0Counts | read-only | mandatory | Counts PRMs that ewre received in the FDL in the last four seconds |
| 1.3.6.1.4.1.18.3.4.8.8.1.11 | ColumnwfMcT1AnsiPRMR1Counts | read-only | mandatory | Counts PRMs that ewre received in the FDL in the last four seconds |
| 1.3.6.1.4.1.18.3.4.8.8.1.12 | ColumnwfMcT1AnsiPRMR2Counts | read-only | mandatory | Counts PRMs that ewre received in the FDL in the last four seconds |
| 1.3.6.1.4.1.18.3.4.8.8.1.13 | ColumnwfMcT1AnsiPRMR3Counts | read-only | mandatory | Counts PRMs that ewre received in the FDL in the last four seconds |
| 1.3.6.1.4.1.18.3.4.8.8.1.14 | ColumnwfMcT1AnsiPRMESCounts | read-only | mandatory | Counts errorred seconds as reported in the Performance report messages |
| 1.3.6.1.4.1.18.3.4.8.8.1.15 | ColumnwfMcT1AnsiPRMSESCounts | read-only | mandatory | Counts severely errorred seconds as reported in the Performance report messages |
| 1.3.6.1.4.1.18.3.4.8.8.1.16 | ColumnwfMcT1AnsiPRMECounts | read-only | mandatory | Counts Performance report messages that are received in error |
| 1.3.6.1.4.1.18.3.4.8.9 | TablewfMcT1BertStatsTable | not-accessible | mandatory | BERT Counter line record - This table contains the statistics for the BERT tester. |
| 1.3.6.1.4.1.18.3.4.8.9.1 | RowwfMcT1BertStatsEntry | not-accessible | mandatory | An entry in the MCT1 Bert Stats table |
| 1.3.6.1.4.1.18.3.4.8.9.1.1 | ColumnwfMcT1BertStatsSlot | read-only | mandatory | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.9.1.2 | ColumnwfMcT1BertStatsConnector | read-only | mandatory | Instance ID Connector, filled in by driver |
| 1.3.6.1.4.1.18.3.4.8.9.1.3 | ColumnwfMcT1BertStatsBitErrors | read-only | mandatory | Bit error counter |
| 1.3.6.1.4.1.18.3.4.8.9.1.4 | ColumnwfMcT1BertStatsBits | read-only | mandatory | Bit counter |