MIB Viewer

Wellfleet-MPLS-LDP-MIB

53 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.4.1.18.3.5.9.15.1TablewfMplsLdpSessCfgTablenot-accessiblemandatoryMPLS LDP session table - This tabulates the LDP session within an mpls protocol group. All sessions are indexed according to the physical slot and the associat…
1.3.6.1.4.1.18.3.5.9.15.1.1RowwfMplsLdpSessCfgEntrynot-accessiblemandatoryMPLS LDP session entries.
1.3.6.1.4.1.18.3.5.9.15.1.1.1ColumnwfMplsLdpSessCfgCreateread-writemandatoryCreate/Delete parameter. Default is created. Users modify this object in order to create/delete MPLS LDP sessions
1.3.6.1.4.1.18.3.5.9.15.1.1.2ColumnwfMplsLdpSessCfgEnableread-writemandatoryEnable/Disable parameter. Default is enabled.
1.3.6.1.4.1.18.3.5.9.15.1.1.3ColumnwfMplsLdpSessCfgSlotread-onlymandatoryThe slot number this LDP session is configured on.
1.3.6.1.4.1.18.3.5.9.15.1.1.4ColumnwfMplsLdpSessCfgIndexread-onlymandatoryThe Session index identifies this particular LDP session on an interface.
1.3.6.1.4.1.18.3.5.9.15.1.1.5ColumnwfMplsLdpSessCfgCircuitread-onlymandatoryThe circuit number of the circuit to which the session belongs.
1.3.6.1.4.1.18.3.5.9.15.1.1.6ColumnwfMplsLdpSessCfgLocalIpAddressread-writemandatoryThe IP address of this MPLS device for the purpose of establishing the LDP peer to peer session.
1.3.6.1.4.1.18.3.5.9.15.1.1.7ColumnwfMplsLdpSessCfgLocalTcpPortread-writemandatoryThe TCP port address of this MPLS device for the purpose of establishing the LDP peer to peer session.
1.3.6.1.4.1.18.3.5.9.15.1.1.8ColumnwfMplsLdpSessCfgRemoteIpAddressread-writemandatoryThe IP address of the remote MPLS device for the purpose of establishing the LDP peer to peer session.
1.3.6.1.4.1.18.3.5.9.15.1.1.9ColumnwfMplsLdpSessCfgRemoteTcpPortread-writemandatoryThe TCP port of the remote MPLS device for the purpose of establishing the LDP peer to peer session.
1.3.6.1.4.1.18.3.5.9.15.1.1.10ColumnwfMplsLdpSessCfgRoutesConfigModeread-writemandatoryIndicates whether network routes should be discovered by a routing protocol(auto) or should be Manually configured(manual), see wfMplsLdpCfgRouteTable.
1.3.6.1.4.1.18.3.5.9.15.1.1.11ColumnwfMplsLdpSessCfgHoldTimeread-writemandatorythe Hold Time indicates the maximum time in seconds that may elapse between the receipt of successive PDUs from the LSR peer.
1.3.6.1.4.1.18.3.5.9.15.1.1.12ColumnwfMplsLdpSessCfgProtoread-writemandatoryThe routing protocols used by MPLS.
1.3.6.1.4.1.18.3.5.9.15.1.1.13ColumnwfMplsLdpSessCfgAggregationread-writemandatoryEnable/Disable aggregation. Default is disabled.
1.3.6.1.4.1.18.3.5.9.15.1.1.14ColumnwfMplsLdpSessCfgDebugLevelread-writemandatoryDebug Levels - This attribute is used to assign the level of DEBUG message to be logged for each LDP session.
1.3.6.1.4.1.18.3.5.9.15.1.1.15ColumnwfMplsLdpSessCfgReqBindRetryTimeread-writemandatoryIt indicates the maximum time in seconds that may elapse between two consecutive request bind in case of no reply.
1.3.6.1.4.1.18.3.5.9.15.1.1.16ColumnwfMplsLdpSessCfgReqBindRetriesread-writemandatoryIt indicates the number of retry times.
1.3.6.1.4.1.18.3.5.9.15.2TablewfMplsLdpSessActualTablenot-accessiblemandatoryMPLS LDP interface actual table - read-only table containing LDP peer status, and actual LDP information.
1.3.6.1.4.1.18.3.5.9.15.2.1RowwfMplsLdpSessActualEntrynot-accessiblemandatoryMPLS LDP interface entries.
1.3.6.1.4.1.18.3.5.9.15.2.1.1ColumnwfMplsLdpSessActualIndexread-onlymandatoryThe Session index identifies this particular LDP session on the interface.
1.3.6.1.4.1.18.3.5.9.15.2.1.2ColumnwfMplsLdpSessActualCircuitread-onlymandatoryThe circuit number of the circuit to which the session belongs.
1.3.6.1.4.1.18.3.5.9.15.2.1.3ColumnwfMplsLdpSessActualStateread-onlymandatoryThe current state of the MPLS LDP session
1.3.6.1.4.1.18.3.5.9.15.2.1.4ColumnwfMplsLdpSessActualPeerStateread-onlymandatoryThe current state of MPLS LDP session with the remote MPLS device
1.3.6.1.4.1.18.3.5.9.15.2.1.5ColumnwfMplsLdpSessActualLocalIpAddressread-onlymandatoryThe actual IP address that LDP used to establish the LDP peer to peer session.
1.3.6.1.4.1.18.3.5.9.15.2.1.6ColumnwfMplsLdpSessActualLocalTcpPortread-onlymandatoryThe actual local TCP port address that this LDP used to establish the LDP peer to peer session.
1.3.6.1.4.1.18.3.5.9.15.2.1.7ColumnwfMplsLdpSessActualRemoteIpAddressread-onlymandatoryThe actual remote IP address that LDP used to establish the LDP peer to peer session.
1.3.6.1.4.1.18.3.5.9.15.2.1.8ColumnwfMplsLdpSessActualRemoteTcpPortread-onlymandatoryThe actual TCP port that LDP used to establish the LDP peer to peer session.
1.3.6.1.4.1.18.3.5.9.15.2.1.9ColumnwfMplsLdpSessActualHoldTimeread-onlymandatorythe actual Hold Time that LDP used to indicate the maximum time in seconds that may elapse between the receipt of successive PDUs from the LSR peer.
1.3.6.1.4.1.18.3.5.9.15.2.1.10ColumnwfMplsLdpSessActualRoutesConfigModeread-onlymandatoryIndicates whether network routes are discovered by a routing protocol(auto) or are Manually configured(manual), see wfMplsLdpCfgRouteTable.
1.3.6.1.4.1.18.3.5.9.15.2.1.11ColumnwfMplsLdpSessActualTCPConnectionRoleread-onlymandatoryIndicates the TCP connection roles between the peers.
1.3.6.1.4.1.18.3.5.9.15.2.1.12ColumnwfMplsLdpSessActualSlotread-onlymandatoryIndicates the slot on which the LDP session is running.
1.3.6.1.4.1.18.3.5.9.15.3TablewfMplsLdpCfgRouteTablenot-accessiblemandatoryMPLS LDP configured route table -
1.3.6.1.4.1.18.3.5.9.15.3.1RowwfMplsLdpCfgRouteEntrynot-accessiblemandatoryMPLS LDP configured route entries.
1.3.6.1.4.1.18.3.5.9.15.3.1.1ColumnwfMplsLdpCfgRouteCreateread-writemandatoryCreate/Delete parameter. Default is created. Users modify this object in order to create/delete MPLS LSP
1.3.6.1.4.1.18.3.5.9.15.3.1.2ColumnwfMplsLdpCfgRouteEnableread-writemandatoryEnable/Disable parameter. Default is enabled.
1.3.6.1.4.1.18.3.5.9.15.3.1.3ColumnwfMplsLdpCfgRouteCctread-onlymandatoryThe circuit munber to which the route associates with.
1.3.6.1.4.1.18.3.5.9.15.3.1.4ColumnwfMplsLdpCfgRouteSessIdread-onlymandatoryThe session identification munber to which the route associates with.
1.3.6.1.4.1.18.3.5.9.15.3.1.5ColumnwfMplsLdpCfgRouteIndexread-onlymandatoryThe index number of this route.
1.3.6.1.4.1.18.3.5.9.15.3.1.6ColumnwfMplsLdpCfgRouteDestinationread-writemandatoryThe netwrok prefix of this route.
1.3.6.1.4.1.18.3.5.9.15.3.1.7ColumnwfMplsLdpCfgRouteMaskread-writemandatoryThe mask of this route.
1.3.6.1.4.1.18.3.5.9.15.3.1.8ColumnwfMplsLdpCfgRouteStateread-onlymandatoryThe current state of the MPLS LDP session.
1.3.6.1.4.1.18.3.5.9.15.4TablewfMplsLdpLibTablenot-accessiblemandatoryMPLS LDP Label Information Base table which contains LSPs that have been set up.
1.3.6.1.4.1.18.3.5.9.15.4.1RowwfMplsLdpLibEntrynot-accessiblemandatoryMPLS LDP Label Information Base.
1.3.6.1.4.1.18.3.5.9.15.4.1.1ColumnwfMplsLdpLibCctread-onlymandatoryThe circuit munber to which the route associates with.
1.3.6.1.4.1.18.3.5.9.15.4.1.2ColumnwfMplsLdpLibSessIdread-onlymandatoryThe session identification munber to which the LIB entry associates with.
1.3.6.1.4.1.18.3.5.9.15.4.1.3ColumnwfMplsLdpLibDestread-onlymandatoryThe destnation network prefix.
1.3.6.1.4.1.18.3.5.9.15.4.1.4ColumnwfMplsLdpLibMidread-onlymandatoryThe merge id.
1.3.6.1.4.1.18.3.5.9.15.4.1.5ColumnwfMplsLdpLibLabelread-onlymandatoryThe label of the lsp that this LIB entry identifies.
1.3.6.1.4.1.18.3.5.9.15.4.1.6ColumnwfMplsLdpLibEncapsread-onlymandatoryThe lsp encapsulation type.
1.3.6.1.4.1.18.3.5.9.15.4.1.7ColumnwfMplsLdpLibDirectionread-onlymandatoryMPLS VC direction.
1.3.6.1.4.1.18.3.5.9.15.4.1.8ColumnwfMplsLdpLibSlotread-onlymandatorySlot on which this LSP got created
1.3.6.1.4.1.18.3.5.9.15.4.1.9ColumnwfMplsLdpLibIndexread-onlymandatoryIndex part of instance id