Wellfleet-MPLS-MLM-MIB
81 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.16.1 | NodewfMplsAtm | |||
| 1.3.6.1.4.1.18.3.5.9.16.1.1 | TablewfMplsAtmIfConfTable | not-accessible | mandatory | MPLS ATM interface configuration table - This tabulates the ATM interfaces within an mpls protocol group. All interfaces are indexed according to their line nu… |
| 1.3.6.1.4.1.18.3.5.9.16.1.1.1 | RowwfMplsAtmIfConfEntry | not-accessible | mandatory | MPLS ATM interface configuration entries. |
| 1.3.6.1.4.1.18.3.5.9.16.1.1.1.1 | ColumnwfMplsAtmIfCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users modify this object in order to create/delete MPLS ATM interfaces |
| 1.3.6.1.4.1.18.3.5.9.16.1.1.1.2 | ColumnwfMplsAtmIfAdminStatus | read-write | mandatory | Enable/Disable parameter. Default is enabled. |
| 1.3.6.1.4.1.18.3.5.9.16.1.1.1.3 | ColumnwfMplsAtmIfConfLineNumber | read-only | mandatory | The line number of the driver line to which the interface belongs. |
| 1.3.6.1.4.1.18.3.5.9.16.1.1.1.4 | ColumnwfMplsAtmIfDebugLogMask | read-write | mandatory | Log bits for debug messages. This values above can be used separately, or OR'd together for a combination of debug levels. |
| 1.3.6.1.4.1.18.3.5.9.16.1.2 | TablewfMplsAtmIfStatusTable | not-accessible | mandatory | MPLS ATM interface status table - This tabulates the ATM interfaces within an mpls protocol group. All interfaces are indexed according to their line number. T… |
| 1.3.6.1.4.1.18.3.5.9.16.1.2.1 | RowwfMplsAtmIfStatusEntry | not-accessible | mandatory | MPLS ATM interface status entries. |
| 1.3.6.1.4.1.18.3.5.9.16.1.2.1.1 | ColumnwfMplsAtmIfOperStatus | read-only | mandatory | The current state of the MPLS ATM interface |
| 1.3.6.1.4.1.18.3.5.9.16.1.2.1.2 | ColumnwfMplsAtmIfStatusLineNumber | read-only | mandatory | The line number of the driver line to which the interface belongs. |
| 1.3.6.1.4.1.18.3.5.9.16.1.2.1.3 | ColumnwfMplsAtmIfCircuit | read-only | mandatory | The circuit number of the circuit to which the interface belongs. |
| 1.3.6.1.4.1.18.3.5.9.16.1.2.1.4 | ColumnwfMplsAtmIfTotalSess | read-only | mandatory | The total number of LDPs up running. |
| 1.3.6.1.4.1.18.3.5.9.16.1.2.1.5 | ColumnwfMplsAtmIfTotalVcs | read-only | mandatory | The total number of VCs either in use, or available on this interface. |
| 1.3.6.1.4.1.18.3.5.9.16.1.2.1.6 | ColumnwfMplsAtmIfAllocVcs | read-only | mandatory | The number of VCs which are currently allocated for different LDP sessions on this interface. wfMplsAtmTotalVcs minus the value of this object results in known… |
| 1.3.6.1.4.1.18.3.5.9.16.1.3 | TablewfMplsAtmSessConfTable | not-accessible | mandatory | This is the ATM related configuration table for every LDP session. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1 | RowwfMplsAtmSessConfEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.1 | ColumnwfMplsAtmSessDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.2 | ColumnwfMplsAtmSessAdminStatus | read-write | mandatory | Specifies the desired administrative state of the VCL. The up and down states indicate that the traffic flow is enabled and disabled respectively for the VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.3 | ColumnwfMplsAtmSessConfLineNumber | read-only | mandatory | Uniquely identifies the interface (port) that contains the appropriate management information. We use line number here. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.4 | ColumnwfMplsAtmSessConfIndex | read-only | mandatory | LDP session index number. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.5 | ColumnwfMplsAtmSessConfDefVclVpi | read-write | mandatory | The VPI value of the default VC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.6 | ColumnwfMplsAtmSessConfDefVclVci | read-write | mandatory | The VCI value of the default VC. It should not in the configured VC range for any LDP session. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.7 | ColumnwfMplsAtmSessConfVcRangeVpi | read-write | mandatory | The VPI value of the VCs in this LDP session. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.8 | ColumnwfMplsAtmSessConfVcRangeMinVci | read-write | mandatory | The minimum VCI value of the configured LDP session. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.9 | ColumnwfMplsAtmSessConfVcRangeMaxVci | read-write | mandatory | The maximum VCI value of the configured LDP session. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.10 | ColumnwfMplsAtmSessDefVclXmtPeakCellRate | read-write | mandatory | Transmit (Forward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection. 0 means best effor… |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.11 | ColumnwfMplsAtmSessDefVclXmtSustainableCellRate | read-write | mandatory | Transmit (Forward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average ra… |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.12 | ColumnwfMplsAtmSessDefVclXmtBurstSize | read-write | mandatory | Transmit (Forward) Burst Size in cells. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.13 | ColumnwfMplsAtmSessDefVclXmtQosClass | read-write | mandatory | Transmit (Forward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.14 | ColumnwfMplsAtmSessDefVclRcvPeakCellRate | read-write | mandatory | Receive (Backward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection. 0 means best effor… |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.15 | ColumnwfMplsAtmSessDefVclRcvSustainableCellRate | read-write | mandatory | Receive (Backward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average ra… |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.16 | ColumnwfMplsAtmSessDefVclRcvBurstSize | read-write | mandatory | Receive (Backward) Burst Size in cells. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.17 | ColumnwfMplsAtmSessDefVclRcvQosClass | read-write | mandatory | Receive (Backward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.18 | ColumnwfMplsAtmSessDefVclAalType | read-write | mandatory | The type of AAL used on the VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.19 | ColumnwfMplsAtmSessDefVclAalCpcsTransmitSduSize | read-write | mandatory | The maximum AAL CPCS SDU size in octets that is supported on the transmit direction of this VCC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.20 | ColumnwfMplsAtmSessDefVclAalCpcsReceiveSduSize | read-write | mandatory | The maximum AAL CPCS SDU size in octets that is supported on the receive direction of this VCC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.21 | ColumnwfMplsAtmSessDefVclAalEncapsType | read-write | mandatory | The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_VCLENCAPS_LLCENCAPS - RFC1483 ATM_VCLE… |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.22 | ColumnwfMplsAtmSessDefVclCongestionIndication | read-write | mandatory | The desired state of the Congestion Indication (CI) bit in the payload field of each ATM cell for this VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.23 | ColumnwfMplsAtmSessDefVclCellLossPriority | read-write | mandatory | The desired state of the Cell Loss Priority (CLP) bit in the ATM header of each cell for this VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.24 | ColumnwfMplsAtmSessDefVclXmtTagging | read-write | mandatory | Tagging forward VC messages if peak/sustainable rates exceeded |
| 1.3.6.1.4.1.18.3.5.9.16.1.3.1.25 | ColumnwfMplsAtmSessDefVclRcvTagging | read-write | mandatory | Tagging backward VC messages if peak/sustainable rates exceeded |
| 1.3.6.1.4.1.18.3.5.9.16.1.4 | TablewfMplsAtmSessStatusTable | not-accessible | mandatory | This is the ATM related status table for every LDP session. |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1 | RowwfMplsAtmSessStatusEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.1 | ColumnwfMplsAtmSessOperStatus | read-only | mandatory | The ATM related LDP session state. |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.2 | ColumnwfMplsAtmSessStatusLineNumber | read-only | mandatory | Uniquely identifies the interface (port) that contains the appropriate management information. We use line number here. |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.3 | ColumnwfMplsAtmSessStatusIndex | read-only | mandatory | LDP session index number. |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.4 | ColumnwfMplsAtmSessActualVcRangeVpi | read-only | mandatory | The VPI value of the actually allowable VC range for this session. The maximum VPI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVpiBit… |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.5 | ColumnwfMplsAtmSessActualVcRangeMinVci | read-only | mandatory | The minimum VCI value of the actually allowable VC range for LDP session. The maximum VCI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiv… |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.6 | ColumnwfMplsAtmSessActualVcRangeMaxVci | read-only | mandatory | The maximum VCI value of the actually allowable VC range for LDP session. The maximum VCI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiv… |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.7 | ColumnwfMplsAtmSessNegotiatedVcRangeVpi | read-only | mandatory | The VPI value of the VCs negotiated with LDP peer for this LDP session. The maximum VPI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveV… |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.8 | ColumnwfMplsAtmSessNegotiatedVcRangeMinVci | read-only | mandatory | The minimum VCI value of VCs negotiated with LDP peer for this LDP session. The maximum VCI value cannot exceed the value allowable by the wfAtmInterfaceMaxAct… |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.9 | ColumnwfMplsAtmSessNegotiatedVcRangeMaxVci | read-only | mandatory | The maximum VCI value of VCs negotiated with LDP peer for this LDP session. The maximum VCI value cannot exceed the value allowable by the wfAtmInterfaceMaxAct… |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.10 | ColumnwfMplsAtmSessInboundInuseVcs | read-only | mandatory | number of VCs opened for inbound LSP. |
| 1.3.6.1.4.1.18.3.5.9.16.1.4.1.11 | ColumnwfMplsAtmSessOutboundInuseVcs | read-only | mandatory | number of VCs opened for outbound LSP. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5 | TablewfMplsAtmVclTable | not-accessible | mandatory | Read-only per VC infomation. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1 | RowwfMplsAtmVclEntry | not-accessible | mandatory | Entry definition. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.1 | ColumnwfMplsAtmVclLineNumber | read-only | mandatory | Uniquely identifies the interface (port) that contains the appropriate management information. We use line number here. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.2 | ColumnwfMplsAtmVclVpi | read-only | mandatory | The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the wfMplsAtmInterfaceMaxActiveVpiBits. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.3 | ColumnwfMplsAtmVclVci | read-only | mandatory | The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the wfMplsAtmInterfaceMaxActiveVciBits. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.4 | ColumnwfMplsAtmVclLdpIndex | read-only | mandatory | Uniquely identifies the LDP session number in this interface. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.5 | ColumnwfMplsAtmVclDirection | read-only | mandatory | The direction of LSP |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.6 | ColumnwfMplsAtmVclState | read-only | mandatory | The VC state. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.7 | ColumnwfMplsAtmVclType | read-only | mandatory | default VC or normal LSP VC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.8 | ColumnwfMplsAtmVclLastChange | read-only | mandatory | The value of MIBII's sysUpTime at the time this VCL entered its current operational state. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.9 | ColumnwfMplsAtmVclXmtPeakCellRate | read-only | mandatory | Transmit (Forward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.10 | ColumnwfMplsAtmVclXmtSustainableCellRate | read-only | mandatory | Transmit (Forward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average ra… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.11 | ColumnwfMplsAtmVclXmtBurstSize | read-only | mandatory | Transmit (Forward) Burst Size in cells. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.12 | ColumnwfMplsAtmVclXmtQosClass | read-only | mandatory | Transmit (Forward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.13 | ColumnwfMplsAtmVclRcvPeakCellRate | read-only | mandatory | Receive (Backward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.14 | ColumnwfMplsAtmVclRcvSustainableCellRate | read-only | mandatory | Receive (Backward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average ra… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.15 | ColumnwfMplsAtmVclRcvBurstSize | read-only | mandatory | Receive (Backward) Burst Size in cells. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.16 | ColumnwfMplsAtmVclRcvQosClass | read-only | mandatory | Receive (Backward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.17 | ColumnwfMplsAtmVclAalType | read-only | mandatory | The type of AAL used on the VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.18 | ColumnwfMplsAtmVclAalCpcsTransmitSduSize | read-only | mandatory | The maximum AAL CPCS SDU size in octets that is supported on the transmit direction of this VCC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.19 | ColumnwfMplsAtmVclAalCpcsReceiveSduSize | read-only | mandatory | The maximum AAL CPCS SDU size in octets that is supported on the receive direction of this VCC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.20 | ColumnwfMplsAtmVclAalEncapsType | read-only | mandatory | The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_VCLENCAPS_LLCENCAPS - RFC1483 ATM_VCLE… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.21 | ColumnwfMplsAtmVclCongestionIndication | read-only | mandatory | The desired state of the Congestion Indication (CI) bit in the payload field of each ATM cell for this VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.22 | ColumnwfMplsAtmVclCellLossPriority | read-only | mandatory | The desired state of the Cell Loss Priority (CLP) bit in the ATM header of each cell for this VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.23 | ColumnwfMplsAtmVclXmtTagging | read-only | mandatory | Tagging forward VC messages if peak/sustainable rates exceeded |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.24 | ColumnwfMplsAtmVclRcvTagging | read-only | mandatory | Tagging backward VC messages if peak/sustainable rates exceeded |