Wellfleet-Modem-MIB
23 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.29.1 | TablewfModemTable | not-accessible | mandatory | Modem line record. |
| 1.3.6.1.4.1.18.3.4.29.1.1 | RowwfModemEntry | not-accessible | mandatory | An entry in the MODEM table |
| 1.3.6.1.4.1.18.3.4.29.1.1.1 | ColumnwfModemDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.29.1.1.2 | ColumnwfModemSlot | read-only | mandatory | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.29.1.1.3 | ColumnwfModemConnector | read-only | mandatory | Instance ID Connector, filled in by the driver. |
| 1.3.6.1.4.1.18.3.4.29.1.1.4 | ColumnwfModemIdSwRev | read-only | mandatory | A textual description of the modem's firmware version number. |
| 1.3.6.1.4.1.18.3.4.29.1.1.5 | ColumnwfModemIdHwRev | read-only | mandatory | A textual description of the revision number of the modem daughter card. |
| 1.3.6.1.4.1.18.3.4.29.1.1.6 | ColumnwfModemLineState | read-only | mandatory | Indicates the state of the modem. |
| 1.3.6.1.4.1.18.3.4.29.1.1.7 | ColumnwfModemConnectionFailReason | read-only | mandatory | indicates the reason for the last failed connection |
| 1.3.6.1.4.1.18.3.4.29.1.1.8 | ColumnwfModemCfgFactoryDefaults | read-write | mandatory | This object indicates if factory defaults are to be loaded. If set to enabled(1), factory defaults are loaded. If set to disabled(2), the initialization string… |
| 1.3.6.1.4.1.18.3.4.29.1.1.9 | ColumnwfModemCfgInitString | read-write | mandatory | An initialization string that will be sent to the modem each time the modem is rebooted. |
| 1.3.6.1.4.1.18.3.4.29.1.1.10 | ColumnwfModemCfgDefaultString | read-only | mandatory | The string contains AT comands for initializing the modem every time the modem comes up, regardless of configuration. |
| 1.3.6.1.4.1.18.3.4.29.1.1.11 | ColumnwfModemCfgResultCodeString | read-only | mandatory | The ASCII response string returned by the modem. Response strings will be returned in response to last command to the modem and in response to activity on the … |
| 1.3.6.1.4.1.18.3.4.29.1.1.12 | ColumnwfModemCfgState | read-write | mandatory | Indicates the state of AT command processing. When a new initialization string is to be sent to the modem, the sender sets the state to cfgInProgress(2). After… |
| 1.3.6.1.4.1.18.3.4.29.1.1.13 | ColumnwfModemCfgCountry | read-write | mandatory | Identifies the country the modem is designed to operate in. This object is not read from the modem directly. It must be entered manually when configuring the m… |
| 1.3.6.1.4.1.18.3.4.29.1.1.14 | ColumnwfModemV54Lpbk | read-write | mandatory | Enables the operator to control, and examine the state of, V.54 loopbacks within the modem. This object equates to the AT&Tn command. |
| 1.3.6.1.4.1.18.3.4.29.1.1.15 | ColumnwfModemV54Timer | read-write | mandatory | Duration in seconds that a test specified in wfModemV.54Lpbk is to execute. |
| 1.3.6.1.4.1.18.3.4.29.1.1.16 | ColumnwfModemV54Errors | read-only | mandatory | Indicates the number of errors reported during the last loopback test. This count will only be updated for loopbacks with test pattern. |
| 1.3.6.1.4.1.18.3.4.29.1.1.17 | ColumnwfModemV54RemLpbkDetect | read-write | mandatory | This object controls whether or not this modem will acknowledge V.54 Remote Loop 2 requests from a remote Site. When ENABLED, this modem can be put into a digi… |
| 1.3.6.1.4.1.18.3.4.29.1.1.18 | ColumnwfModemPhoneNumber | read-write | mandatory | Contains the phone number for the modem to dial. |
| 1.3.6.1.4.1.18.3.4.29.1.1.19 | ColumnwfModemInitState | read-only | mandatory | Indictes the state of the modem initialization sequence. The state will freeze in the state that fails when a failure is detected. Otherwise, the state will be… |
| 1.3.6.1.4.1.18.3.4.29.1.1.20 | ColumnwfModemUnitReset | read-write | mandatory | Enables the operator to remotely reset the unit. Using this command will cause the unit to terminate all its connections and drop data. |
| 1.3.6.1.4.1.18.3.4.29.1.1.21 | ColumnwfModemType | read-write | mandatory | Enables a user to specify a modem type attached to the port thus enabling Site Manager to put a preconfigured modem init string in the wfModemInitString entry.… |