Wellfleet-PIM-MIB
79 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.14.1 | NodewfPim | |||
| 1.3.6.1.4.1.18.3.5.3.14.1.1 | ScalarwfPimDelete | read-write | mandatory | This is a global parameter that creates/deletes PIM in the box. Default is created. Users perform a set operation on this object in order to create/delete Pim. |
| 1.3.6.1.4.1.18.3.5.3.14.1.2 | ScalarwfPimDisable | read-write | mandatory | This is a global parameter that enables/disables PIM in the box. Default is enabled. Users perform a set operation on this object in order to enable/disable Pi… |
| 1.3.6.1.4.1.18.3.5.3.14.1.3 | ScalarwfPimState | read-only | mandatory | The current state of the entire PIM. This state is up when PIM process is up and PIM global is created and enabled. This state is down when the PIM process is … |
| 1.3.6.1.4.1.18.3.5.3.14.1.4 | ScalarwfPimInfoWarning | read-write | mandatory | Turn PIM log ON or OFF for PIM Info/Warning messages. The bit position is used to represent a PIM module: PIM_LOG_BOOTSTRAP_PROC 0x00000001 Bootstrap procedure… |
| 1.3.6.1.4.1.18.3.5.3.14.1.5 | ScalarwfPimDebug | read-write | mandatory | Turn PIM log ON or OFF for PIM debugging messages. The bit position is used to represent a PIM module: PIM_LOG_BOOTSTRAP_PROC 0x00000001 Bootstrap procedure PI… |
| 1.3.6.1.4.1.18.3.5.3.14.1.6 | ScalarwfPimTrace | read-write | mandatory | Turn PIM log ON or OFF for PIM trace messages. The bit position is used to represent a PIM module: PIM_LOG_BOOTSTRAP_PROC 0x00000001 Bootstrap procedure PIM_LO… |
| 1.3.6.1.4.1.18.3.5.3.14.1.7 | ScalarwfPimTotalCacheEntries | read-only | mandatory | The total number of cache entries in the box. These are the (S,G), (*,G) and/or (*,*,RP) entries |
| 1.3.6.1.4.1.18.3.5.3.14.1.8 | ScalarwfPimJoinPruneInterval | read-write | mandatory | The default interval at which periodic PIM-SM Join/Prune messages are to be sent |
| 1.3.6.1.4.1.18.3.5.3.14.1.9 | ScalarwfPimLastHopDataThresholdDisable | read-write | mandatory | Enable/Disable Last Hop router to switch to SPT. Default is enabled. If enabled, the data rate is monitored at the last hop router connected to the receiver. I… |
| 1.3.6.1.4.1.18.3.5.3.14.1.10 | ScalarwfPimLastHopDataThreshold | read-write | mandatory | The data rate from the source in bytes per second at which the last hop router creates (S,G) state and switches to the shortest path tree. This switch will hap… |
| 1.3.6.1.4.1.18.3.5.3.14.1.11 | ScalarwfPimRPDataThresholdDisable | read-write | mandatory | Enable/Disable RP router to switch to SPT. Default is enabled. If enabled, the data rate is monitored at the RP responsible for the group of the data. If the r… |
| 1.3.6.1.4.1.18.3.5.3.14.1.12 | ScalarwfPimRPDataThreshold | read-write | mandatory | The data rate from the source in bytes per second at which the RP router creates (S,G) state and switches to the shortest path tree. This switch will happen im… |
| 1.3.6.1.4.1.18.3.5.3.14.1.13 | ScalarwfPimThresholdSampleInterval | read-write | mandatory | This is the sample interval in seconds during which the rate of the current data flow is calculated. This sampling time is in multiples of 16. If this value en… |
| 1.3.6.1.4.1.18.3.5.3.14.1.14 | ScalarwfPimPMBREnable | read-write | mandatory | Enable/Disable the router to be a PIM Border Router. Default is disabled. |
| 1.3.6.1.4.1.18.3.5.3.14.1.15 | ScalarwfPimHelloOptionGenIdDisable | read-write | mandatory | Enable/Disable the Bay Networks Hello Neighbor Option in Hello packets to include a generation identifier. Default is enabled. By enabling this neighbor option… |
| 1.3.6.1.4.1.18.3.5.3.14.1.16 | ScalarwfPimBSRAddress | read-only | mandatory | The elected Bootstrap Router IP address for PIM domain. |
| 1.3.6.1.4.1.18.3.5.3.14.1.17 | ScalarwfPimBSRPriority | read-only | mandatory | Priority for BSR - this is the priority of the elected BSR as the result of BSR election procedure. It may change over time when the BSR address is switched to… |
| 1.3.6.1.4.1.18.3.5.3.14.1.18 | ScalarwfPimBSRHoldTime | read-only | mandatory | The period at which BSR is declared down. This period is set to (2 * wfPimCBSRInterval) + 10 |
| 1.3.6.1.4.1.18.3.5.3.14.1.19 | ScalarwfPimBSRHashMaskLen | read-only | mandatory | Hash mask length for the elected BSR as the result of BSR election procedure. It may change over time when the BSR address is switched to another router. |
| 1.3.6.1.4.1.18.3.5.3.14.1.20 | ScalarwfPimCBSREnable | read-write | mandatory | Enable/Disable router to be a Candidate BSR. Default is disabled. |
| 1.3.6.1.4.1.18.3.5.3.14.1.21 | ScalarwfPimCBSRAddress | read-write | mandatory | The Candidate Bootstrap Router IP address for PIM domain. |
| 1.3.6.1.4.1.18.3.5.3.14.1.22 | ScalarwfPimCBSRPriority | read-write | mandatory | Priority for Candidate BSR - used in election mechanism with IP ADDRESS of BSR |
| 1.3.6.1.4.1.18.3.5.3.14.1.23 | ScalarwfPimCBSRInterval | read-write | mandatory | If this is the elected BSR, then this is the interval at which periodic Bootstrap (RP-Set) messages are transmitted (multicast out) on all PIM interfaces. This… |
| 1.3.6.1.4.1.18.3.5.3.14.1.24 | ScalarwfPimCBSRHashMaskLen | read-write | mandatory | The length of the hash-mask that is used to map a group to one of the C-RPs from RP-Set message |
| 1.3.6.1.4.1.18.3.5.3.14.1.25 | ScalarwfPimCRPEnable | read-write | mandatory | Enable/Disable router to be a Candidate RP. Default is disabled. |
| 1.3.6.1.4.1.18.3.5.3.14.1.26 | ScalarwfPimCRPAddress | read-write | mandatory | The Candidate RP IP address used to map the configured wfPimCRPGrPrefix. |
| 1.3.6.1.4.1.18.3.5.3.14.1.27 | ScalarwfPimCRPPriority | read-write | mandatory | Priority for Candidate RP - used in hash mechanism to determine RP for the Group |
| 1.3.6.1.4.1.18.3.5.3.14.1.28 | ScalarwfPimCRPGrPrefix | read-write | mandatory | The string of mask-len/group address for C-RP-Advs messages. If configured the router is considered to be a C-RP for the configured groups. Ex. for 238.1.1.1/2… |
| 1.3.6.1.4.1.18.3.5.3.14.1.29 | ScalarwfPimCRPAdvInterval | read-write | mandatory | The interval at which periodic PIM-SM CRP Advertize messages are transmitted (unicast to the elected BSR) from a Candidate RP router. |
| 1.3.6.1.4.1.18.3.5.3.14.1.30 | ScalarwfPimCRPHoldTime | read-only | mandatory | This is to tell the BSR how soon the RP entry should be removed from the BSR's RP set table. This is set to 2.5 * wfPimCRPAdvInterval |
| 1.3.6.1.4.1.18.3.5.3.14.1.31 | ScalarwfPimRPRcvRegisterCacheTimeout | read-write | mandatory | The timeout value for all entries whose inbound interface are created from receiving PIM Register packets in the RP router. If PIM Register packet has not been… |
| 1.3.6.1.4.1.18.3.5.3.14.1.32 | ScalarwfPimRPRegisterDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. This is used to activate a RP Register process to efficiently handle forwarding of encapsulated PIM Register pack… |
| 1.3.6.1.4.1.18.3.5.3.14.1.33 | ScalarwfPimRegisterSuppressTimeout | read-write | mandatory | The period used to suppress sending of PIM Register packets from the source DR when the RP is receiving data packets natively or the RP has no downstream recei… |
| 1.3.6.1.4.1.18.3.5.3.14.1.34 | ScalarwfPimProbeTime | read-write | mandatory | The time between sending a null Register and the Register-Suppression-Timer expiring unless it is restarted by receiving a Register-Stop. A zero will disable t… |
| 1.3.6.1.4.1.18.3.5.3.14.1.35 | ScalarwfPimCiscoCompatibilityEnable | read-write | obsolete | Enable/Disable router to be compatible with Cisco PIM routers. This is to cope with those portions of Cisco's implementation that do not comply with the PIM st… |
| 1.3.6.1.4.1.18.3.5.3.14.1.36 | ScalarwfPimRfcComplianceDisable | read-write | mandatory | Allows router to be compatible with those portions of implementation by other vendors which do not comply with the standards specified in RFC 2362 for PIM. Tur… |
| 1.3.6.1.4.1.18.3.5.3.14.2 | TablewfPimIfTable | not-accessible | mandatory | The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1 | RowwfPimIfEntry | not-accessible | mandatory | An PIM interface description |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.1 | ColumnwfPimIfDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete a PIM interface. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.2 | ColumnwfPimIfDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a PIM interface. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.3 | ColumnwfPimIfState | read-only | mandatory | The current state of the PIM interface. This state is up when the underlying IGMP is up and PIM global is created and enabled. This state is down when the unde… |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.4 | ColumnwfPimIfCct | read-only | mandatory | The Circuit Number that this interface runs over |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.5 | ColumnwfPimIfIpAddress | read-only | mandatory | The IP Address to which this entry's addressing information pertains |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.6 | ColumnwfPimIfIpMask | read-only | mandatory | The network mask for the IP address of the PIM interface. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.7 | ColumnwfPimIfHelloInterval | read-write | mandatory | The frequency at which PIM Hello messages are transmitted on this PIM interface. Recommends a higher number for slower speed serial lines. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.8 | ColumnwfPimIfMode | read-write | mandatory | Configure this interface for Sparse Mode or Dense Mode |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.9 | ColumnwfPimIfCacheTimeOut | read-write | mandatory | How long an entry should remain in the PIM cache before being timed out and deleted |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.10 | ColumnwfPimIfDefaultGlobalJoinPruneIntervalDisable | read-write | mandatory | If enabled, the Join/Prune interval used on this interface will be the one defined in pim global wfPimJoinPruneInterval. If disabled, the interface mib wfPimIf… |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.11 | ColumnwfPimIfJoinPruneInterval | read-write | mandatory | The interval at which periodic PIM-SM Join/Prune messages are transmitted on this PIM interface. This will only be in effect if wfPimIfDefaultGlobalJoinPruneIn… |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.12 | ColumnwfPimIfDownstreamIgmpRelayEnable | read-write | mandatory | Enable/disable support for IGMP Relay as downstream router. By default, we disable this support. By enabling this support, PIM router is allowed to receive mul… |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.13 | ColumnwfPimIfLocalDRPriority | read-write | mandatory | The DR Election Priority option is used when people want to have control over which router is elected as the DR, irrespective of the address of routers on the … |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.14 | ColumnwfPimIfDR | read-only | mandatory | The Designated Router on this PIM interface. For point- to-point interfaces, this object has the value 0.0.0.0. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.15 | ColumnwfPimIfDRPriority | read-only | mandatory | The elected Designated Router priority on the LAN which connects to this PIM interface. If this is zero, it indicates the DR is elected using the highest ip ad… |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.16 | ColumnwfPimIfInHellos | read-only | mandatory | Number of Pim Hello packets recieved |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.17 | ColumnwfPimIfOutHellos | read-only | mandatory | Number of Pim Hello packets sent |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.18 | ColumnwfPimIfInPrunes | read-only | mandatory | The number of prunes this circuit has recieved |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.19 | ColumnwfPimIfOutPrunes | read-only | mandatory | The number of prunes this circuit has sent |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.20 | ColumnwfPimIfInGrafts | read-only | mandatory | The number of grafts this circuit has recieved |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.21 | ColumnwfPimIfOutGrafts | read-only | mandatory | The number of grafts this circuit has sent |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.22 | ColumnwfPimIfInCRPAdvs | read-only | mandatory | Number of C-RP-Adv packets received on this interface. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.23 | ColumnwfPimIfOutCRPAdvs | read-only | mandatory | Number of C-RP-Adv packets transmitted out of this interface |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.24 | ColumnwfPimIfInRPSets | read-only | mandatory | Number of RP-Set packets received on this interface. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.25 | ColumnwfPimIfOutRPSets | read-only | mandatory | Number of RP-Set packets send out of this interface. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.26 | ColumnwfPimIfInRegisters | read-only | mandatory | Number of Register messages received on this interface. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.27 | ColumnwfPimIfOutRegisters | read-only | mandatory | Number of Register messages sent from this interface. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.28 | ColumnwfPimIfInRegStop | read-only | mandatory | Number of Register Stop packets received on this interface. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.29 | ColumnwfPimIfOutRegStop | read-only | mandatory | Number of Register Stop packets sent from this interface. |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.30 | ColumnwfPimIfInJoinPrunes | read-only | mandatory | The number of Join/Prunes this circuit has recieved |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.31 | ColumnwfPimIfOutJoinPrunes | read-only | mandatory | The number of Join/Prunes this circuit has sent |
| 1.3.6.1.4.1.18.3.5.3.14.2.1.32 | ColumnwfPimIfBootstrapBorder | read-write | mandatory | Define whether this PIM interface is a PIM Bootstrap Border interface or not. When set to enable, it is a border interface and both incoming (from other PIM ro… |
| 1.3.6.1.4.1.18.3.5.3.14.3 | TablewfPimNeighborTable | not-accessible | mandatory | The (conceptual) table listing the router's PIM neighbors. |
| 1.3.6.1.4.1.18.3.5.3.14.3.1 | RowwfPimNeighborEntry | not-accessible | mandatory | An entry in the Pim Neighbor table |
| 1.3.6.1.4.1.18.3.5.3.14.3.1.1 | ColumnwfPimNeighborAddress | read-only | mandatory | The IP address of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.18.3.5.3.14.3.1.2 | ColumnwfPimNeighborCct | read-only | mandatory | The value of Cct for the interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.18.3.5.3.14.3.1.3 | ColumnwfPimNeighborUpTime | read-only | mandatory | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.18.3.5.3.14.3.1.4 | ColumnwfPimNeighborExpiryTime | read-only | mandatory | The minimum time remaining before this PIM neighbor will be aged out. |
| 1.3.6.1.4.1.18.3.5.3.14.3.1.5 | ColumnwfPimNeighboringRouterGenId | read-only | mandatory | The neighboring router's generation identifier. If this id is different from before, then this neighbor was just rebooted. |
| 1.3.6.1.4.1.18.3.5.3.14.3.1.6 | ColumnwfPimNeighboringRouterDRPriority | read-only | mandatory | The neighboring router's local DR Priority. The neighbor with the highest priority will be elected as the DR on the LAN. This is only true if all neighbors on … |