Wellfleet-PPP-MIB
224 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.2.1 | TablewfPppLineTable | not-accessible | mandatory | The Wellfleet PPP Line Configuration Table containing attributes dealing with the link layer and the Link Control Protocol (LCP) |
| 1.3.6.1.4.1.18.3.5.9.2.1.1 | RowwfPppLineEntry | not-accessible | mandatory | per Wellfleet PPP line configuration parameters and counters |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.1 | ColumnwfPppLineDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.2 | ColumnwfPppLineDisable | read-write | mandatory | Enable/Disable parameter Open/Close events to the LCP FSM |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.3 | ColumnwfPppLineState | read-only | mandatory | PPP state variable, Not Present, Init, Down, Up |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.4 | ColumnwfPppLineLineNumber | read-only | mandatory | Instance identifier. This is the line number assigned to the driver PPP is running on top of |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.5 | ColumnwfPppLineLLIndex | read-only | mandatory | Instance identifier. This is the lower layer index presented to PPP by the layer immediately below it on the protocol stack. If the lower layer is a driver, th… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.6 | ColumnwfPppLineLcpCurrentState | read-only | mandatory | the current state of the LCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.7 | ColumnwfPppLineRestartTimer | read-write | mandatory | value for Restart timer in seconds |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.8 | ColumnwfPppLineEchoRequestFreq | read-write | mandatory | value for Echo-Request frequency - number of seconds between transmission of Echo-Request packets |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.9 | ColumnwfPppLineEchoReplyLoss | read-write | mandatory | value for Echo-Reply acceptable loss - number of unacknowledged Echo-Reply packets counted before declaring the link down |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.10 | ColumnwfPppLineMaxConfReq | read-write | mandatory | value for maximum Configure-Requests - number of Configure-Request packets sent without receiving a valid Configure-Ack, Configure-Nak or Configure-Reject befo… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.11 | ColumnwfPppLineMaxTermReq | read-write | mandatory | value for maximum Terminate-Requests - number of Terminate-Request packets sent without receiving a Terminate-Ack before assuming peer is unable to respond |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.12 | ColumnwfPppLineMaxConfFail | read-write | mandatory | value for maximum configuration failure count - number of Configure-Nak packets sent without sending a Configure-Ack before assuming configuration is unable to… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.13 | ColumnwfPppLineMagicNumber | read-only | mandatory | the Magic Number being used on this line |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.14 | ColumnwfPppLineMru | read-only | mandatory | this is the MRU being used on the line (in both directions) |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.15 | ColumnwfPppLineLocalAuthProtocol | read-write | mandatory | this is the authorization protocol we require our peer to use on our side of the link |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.16 | ColumnwfPppLineRemoteAuthProtocol | read-only | mandatory | this is the authorization protocol our peer requires us to use on its side of the link |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.17 | ColumnwfPppLineLocalPapId | read-write | mandatory | our PAP id - our peer sends this to us in an Authenticate-Request message |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.18 | ColumnwfPppLineLocalPapPassword | read-write | mandatory | our PAP password - our peer sends this to us in an Authenticate-Request message |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.19 | ColumnwfPppLineRemotePapId | read-write | mandatory | our peer's PAP id - we send this to our peer in an Authenticate-Request message |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.20 | ColumnwfPppLineRemotePapPassword | read-write | mandatory | our peer's PAP password - we send this to our peer in an Authenticate-Request message |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.21 | ColumnwfPppLineLQProtocol | read-write | mandatory | the Link Quality protocol we want to use |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.22 | ColumnwfPppLineDisableRemoteLQRTimer | read-write | mandatory | enable/disable our peer's LQR timer - this allows for one side to maintain the timer while the other just responds to LQR packets |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.23 | ColumnwfPppLineCfgLQRRptPrd | read-write | mandatory | this is the value in seconds between transmission of LQR packets (Reporting-Period) - it will be the same on both sides |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.24 | ColumnwfPppLineLQRRptPrd | read-only | mandatory | this is the Reporting-Period, in seconds, agreed upon during negotiation - we allow the peer to negotiate down from our configured period, our maximum, but not… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.25 | ColumnwfPppLineCfgInboundQuality | read-write | mandatory | the percentage of packets sent by our peer that we've successfully received (over the last 5 LQR Reporting-Periods) - 100 indicates we won't tolerate any loss |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.26 | ColumnwfPppLineInboundQuality | read-only | mandatory | the current inbound quality |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.27 | ColumnwfPppLineCfgOutboundQuality | read-write | mandatory | the percentage of packets sent by us that our peer successfully received (over the last 5 LQR Reporting-Periods) - 100 indicates we won't tolerate any loss |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.28 | ColumnwfPppLineOutboundQuality | read-only | mandatory | the current inbound quality |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.29 | ColumnwfPppLineOutLQRs | read-only | mandatory | the number of Link-Quality-Report packets we've transmitted |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.30 | ColumnwfPppLineInLQRs | read-only | mandatory | the number of Link-Quality-Report packets we've received |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.31 | ColumnwfPppLineChapSecret | read-write | mandatory | this CHAP secret MUST be the same on both sides of the link if CHAP is used as the Authentication protocol |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.32 | ColumnwfPppLinePapFallbackDisable | read-write | mandatory | if an attempt to negotiate CHAP fails, enabling this allows a fallback to PAP |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.33 | ColumnwfPppLineChapLocalName | read-write | mandatory | This attribute is used to assign a local CHAP Name which is used to inform our peer of our identity, during WHOAMI processing |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.34 | ColumnwfPppLineChapRemoteName | read-only | mandatory | This attribute is used to store our peer's CHAP Name which is used to learn our peer's identity, during WHOAMI processing |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.35 | ColumnwfPppLineChapPeriodicTimer | read-write | mandatory | Timer for periodic CHAP in seconds. A time of 0 disables Periodic CHAP. This timer value should long enough to allow CHAP to complete one phase before entering… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.36 | ColumnwfPppLineBadPackets | read-only | mandatory | These are packets not in correct PPP format |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.37 | ColumnwfPppLineLastBadPacket | read-only | mandatory | This is the first 16 bytes of the last bad packet we received |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.38 | ColumnwfPppLineLevelPktsIn | read-only | mandatory | This is the count of PPP link-level packets (such as Link Control Protocol or Compression Control Protocl) which have been received. |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.39 | ColumnwfPppLineAllowPapReject | read-write | mandatory | There are some peers that don't want us asking to be a PAP authenticator, so accept the Reject and remove PAP from the LCP Configure-Request if this is enabled. |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.40 | ColumnwfPppLineActiveCct | read-only | mandatory | This is the circuit number that this PPP line belongs to For the any switched lines, this will initially be -1 |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.41 | ColumnwfPppLineCfgAsyncMap | read-write | mandatory | This is the initial seed value of Async-Control-Character-Map which will be used for LCP negotiations with the peer. |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.42 | ColumnwfPppLineActualAsyncMap | read-only | mandatory | Async-Control-Character-Map used by the link to escape control characters in the data packet. This is the result of LCP negotiations with the peer. |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.43 | ColumnwfPppLineAuthTimer | read-write | mandatory | value for Authentication timer in seconds |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.44 | ColumnwfPppLineConvergenceTimer | read-write | mandatory | value for Convergence timer in seconds |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.45 | ColumnwfPppLineMagicNumDisable | read-write | mandatory | Allows Magic Numbers to be disabled on this interface. |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.46 | ColumnwfPppLineMyLinkDiscr | read-write | mandatory | value of Link Discriminator of this endpoint |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.47 | ColumnwfPppLinePeerLinkDiscr | read-write | mandatory | value of Link Discriminator of peer's endpoint |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.48 | ColumnwfPppLineCfgMru | read-write | mandatory | this is the Configured MRU being used on the line |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.49 | ColumnwfPppLineRfc1661Compliance | read-write | mandatory | Enable/Disable parameter for RFC 1661 compliance |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.50 | ColumnwfPppLineLqmCurrentState | read-only | mandatory | Indicates whether LQM is running on the line. |
| 1.3.6.1.4.1.18.3.5.9.2.2 | TablewfPppCircuitTable | not-accessible | mandatory | The Wellfleet PPP Circuit Configuration Table containing attributes dealing with the network layer and each Network Control Protocol (NCP) |
| 1.3.6.1.4.1.18.3.5.9.2.2.1 | RowwfPppCircuitEntry | not-accessible | mandatory | per Wellfleet circuit PPP configuration parameters and counters |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.1 | ColumnwfPppCircuitDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.2 | ColumnwfPppCircuitState | read-only | mandatory | PPP state variable, Not Present, Init, Down, Up |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.3 | ColumnwfPppCircuitIpcpCurrentState | read-only | mandatory | the current state of the IPCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.4 | ColumnwfPppCircuitOsinlcpCurrentState | read-only | mandatory | the current state of the OSINLCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.5 | ColumnwfPppCircuitXnscpCurrentState | read-only | mandatory | the current state of the XNSCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.6 | ColumnwfPppCircuitDncpCurrentState | read-only | mandatory | the current state of the DNCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.7 | ColumnwfPppCircuitAtcpCurrentState | read-only | mandatory | the current state of the ATCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.8 | ColumnwfPppCircuitIpxcpCurrentState | read-only | mandatory | the current state of the IPXCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.9 | ColumnwfPppCircuitBncpCurrentState | read-only | mandatory | the current state of the BNCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.10 | ColumnwfPppCircuitVncpCurrentState | read-only | mandatory | the current state of the VNCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.11 | ColumnwfPppCircuitID | read-only | mandatory | cct number for this instance |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.12 | ColumnwfPppCircuitIpDisable | read-write | mandatory | enable/disable IP Protocol - disabling generates a Close event to the IPCP FSM and consequently disallows IP traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.13 | ColumnwfPppCircuitOsinlDisable | read-write | mandatory | enable/disable OSI Network Layer Protocol - disabling generates a Close event to the OSINLCP FSM and consequently disallows OSI traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.14 | ColumnwfPppCircuitXnsDisable | read-write | mandatory | enable/disable XNS Protocol - disabling generates a Close event to the XNSCP FSM and consequently disallows XNS traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.15 | ColumnwfPppCircuitDecnetDisable | read-write | mandatory | enable/disable DECnet Protocol - disabling generates a Close event to the DNCP FSM and consequently disallows DECnet traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.16 | ColumnwfPppCircuitAppletalkDisable | read-write | mandatory | enable/disable AppleTalk Protocol - disabling generates a Close event to the ATCP FSM and consequently disallows AppleTalk traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.17 | ColumnwfPppCircuitIpxDisable | read-write | mandatory | enable/disable IPX Protocol - disabling generates a Close event to the IPXCP FSM and consequently disallows IPX traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.18 | ColumnwfPppCircuitBridgeDisable | read-write | mandatory | enable/disable the Bridge - disabling generates a Close event to the BNCP FSM and consequently disallows bridge traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.19 | ColumnwfPppCircuitVinesDisable | read-write | mandatory | enable/disable Vines Protocol - disabling generates a Close event to the VNCP FSM and consequently disallows Vines traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.20 | ColumnwfPppCircuitCfgLocalIpAddr | read-write | mandatory | the IP address we're going to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.21 | ColumnwfPppCircuitLocalIpAddr | read-only | mandatory | the IP address our peer wants us to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.22 | ColumnwfPppCircuitCfgRemoteIpAddr | read-write | mandatory | the IP address we want our peer to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.23 | ColumnwfPppCircuitRemoteIpAddr | read-only | mandatory | the IP address our peer wants to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.24 | ColumnwfPppCircuitCfgIpxNetworkNumber | read-write | mandatory | the configured IPX Network Number to be used by both us and our peer |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.25 | ColumnwfPppCircuitIpxNetworkNumber | read-only | mandatory | the result of IPX Network Number negotiation |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.26 | ColumnwfPppCircuitIpxRemoteNodeNumber | read-write | mandatory | this is what we'll tell our peer to use for node number if it sends us a 0 |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.27 | ColumnwfPppCircuitCfgIpxRoutingProtocol | read-write | mandatory | the desired IPX Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.28 | ColumnwfPppCircuitIpxRoutingProtocol | read-only | mandatory | the negotiated IPX Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.29 | ColumnwfPppCircuitLocalIpxRouterName | read-write | mandatory | our IPX Router Name |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.30 | ColumnwfPppCircuitRemoteIpxRouterName | read-only | mandatory | our peer's IPX Router Name |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.31 | ColumnwfPppCircuitIpxConfigComplete | read-only | mandatory | indicates whether or not IPXCP converged on all required options |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.32 | ColumnwfPppCircuitCfgAtNetwork | read-write | mandatory | the configured AppleTalk network number - our peer must use the same number |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.33 | ColumnwfPppCircuitAtNetwork | read-only | mandatory | the AppleTalk network number we agreed to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.34 | ColumnwfPppCircuitCfgLocalAtNode | read-write | mandatory | the AppleTalk node number we're configured to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.35 | ColumnwfPppCircuitLocalAtNode | read-only | mandatory | our AppleTalk node number after negotiation |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.36 | ColumnwfPppCircuitCfgRemoteAtNode | read-write | mandatory | the AppleTalk node number we want our peer to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.37 | ColumnwfPppCircuitRemoteAtNode | read-only | mandatory | our peer's AppleTalk node number after negotiation |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.38 | ColumnwfPppCircuitCfgAtRoutingProtocol | read-write | mandatory | the desired AppleTalk Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.39 | ColumnwfPppCircuitAtRoutingProtocol | read-only | mandatory | the negotiated AppleTalk Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.40 | ColumnwfPppCircuitCfgBridgeEnet | read-write | mandatory | allow/disallow Ethernet bridged frames |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.41 | ColumnwfPppCircuitBridgeEnet | read-only | mandatory | result of bridge MAC type negotiation for Ethernet |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.42 | ColumnwfPppCircuitCfgBridgeFddi | read-write | mandatory | allow/disallow FDDI bridged frames |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.43 | ColumnwfPppCircuitBridgeFddi | read-only | mandatory | result of bridge MAC type negotiation for FDDI |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.44 | ColumnwfPppCircuitCfgBridgeTokenRing | read-write | mandatory | allow/disallow Token Ring bridged frames |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.45 | ColumnwfPppCircuitBridgeTokenRing | read-only | mandatory | result of bridge MAC type negotiation for Token Ring |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.46 | ColumnwfPppCircuitBadPackets | read-only | mandatory | these are packets not in correct PPP format |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.47 | ColumnwfPppCircuitLastBadPacket | read-only | mandatory | this is the first 16 bytes of the last bad packet we received |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.48 | ColumnwfPppCircuitCcpCurrentState | read-only | mandatory | the current state of the CCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.49 | ColumnwfPppCircuitCcpDisable | read-write | mandatory | enable/disable compression - disabling generates a Close event to the CCP FSM and consequently disallows compression traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.50 | ColumnwfPppCircuitPppMode | read-write | mandatory | Pre 9.0 multilines can only negotiate LCP over 1 line. The exact line which LCP will occur on is unknown. So in order to handle this situation we will wait unt… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.51 | ColumnwfPppCircuitMLFragPerm | read-write | mandatory | This parameter allows interoperability with PPP Multilink implementations which do not allow fragmentation. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.52 | ColumnwfPppCircuitExamPeriod | read-write | mandatory | This indicates the interval that the Multilink bundle should be polled for possible congestion. This value is in tenths of a second |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.53 | ColumnwfPppCircuitFullThreshold | read-write | mandatory | This is the percentage of the theoretical maximum line throughput that must be reached or exceeded before the line is considered congested. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.54 | ColumnwfPppCircuitPeriodsCng | read-write | mandatory | This is the number of consecutive periods where the line throughput is above the congestion threshold required to declare the line congested and attempt correc… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.55 | ColumnwfPppCircuitPrefBwSlot | read-write | mandatory | This is the preferred bandwidth slot. When lines are requested to be added to the Multilink bundle this parameter denotes the slot which is asked first. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.56 | ColumnwfPppCircuitResvBwSlot | read-write | mandatory | This is the reserve bandwidth slot. When lines are requested to be added to the Multilink bundle this parameter denotes the slot which is asked if the preferre… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.57 | ColumnwfPppCircuitMLFragTriggerSize | read-write | mandatory | This is the minimum size of a packet of which Multilink will fragment. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.58 | ColumnwfPppCircuitMaxLinks | read-write | mandatory | This is the maximum number of links allowed in the Multilink bundle for this circuit at any one time. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.59 | ColumnwfPppCircuitRecoverThreshold | read-write | mandatory | This is the recovery threshold expressed as a percentage of the theoretical maximum bundle throughput. The actual throughput must fall below this percentage in… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.60 | ColumnwfPppCircuitPeriodsUnCng | read-write | mandatory | This parameter is used for recovery. Once a Multilink bundle has been declared as congested, this is the number of consecutive examination periods where the qu… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.61 | ColumnwfPppCircuitHistory | read-only | mandatory | DEBUG parameter - This is the BOD history buffer. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.62 | ColumnwfPppCircuitDebugFlag | read-write | mandatory | DEBUG parameter - This is the BOD Debug flag, used to control debug code for BOD. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.63 | ColumnwfPppCircuitActualMode | read-only | mandatory | This attribute is the actual ppp mode of the circuit after LCP has negotiated. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.64 | ColumnwfPppCircuitMaxBuffers | read-write | mandatory | This is the maximum number of stored buffers allowed in the Multilink Receive logic for this circuit at any one time. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.65 | ColumnwfPppCircuitLinksConfigured | read-write | mandatory | This is the current number of lines configured for this Multilink circuit. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.66 | ColumnwfPppCircuitBacpDisable | read-write | mandatory | enable/disable BACP Protocol - disabling generates a Close event to the BACP FSM and consequently disallows BAP traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.67 | ColumnwfPppCircuitBacpCurrentState | read-only | mandatory | the current state of the BACP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.68 | ColumnwfPppCircuitBacpNoPhoneNum | read-write | mandatory | enable/disable sending of the No-Phone-Number-Needed option in BACP Call Request packets |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.69 | ColumnwfPppCircuitIpv6Disable | read-write | mandatory | enable/disable IPv6 Protocol - disabling generates a Close event to the IPv6CP FSM and consequently disallows IPv6 traffic on this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.70 | ColumnwfPppCircuitIpv6CurrentState | read-only | mandatory | the current state of the Ipv6 Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.71 | ColumnwfPppCircuitCcpType | read-write | mandatory | Specifies whether to use CCP or Individual Link CCP |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.72 | ColumnwfPppCircuitCfgCcpOptions | read-write | mandatory | Specifies the compression protocol options in 1st config-request |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.73 | ColumnwfPppCircuitCcpOptions | read-only | mandatory | The negotiated compression protocol option |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.74 | ColumnwfPppCircuitStacLZSCheckMode | read-write | mandatory | Specifies the check mode for STAC LZS compression protocol. See RFC 1974 for more information. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.75 | ColumnwfPppCircuitMLFragStrict | read-write | mandatory | enable/disable strict fragmentation algorithm i.e. fragmenting a packet when its size exceeds the threshold regardless of what the average packet size is |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.76 | ColumnwfPppCircuitLampreyCompDisable | read-write | mandatory | enable/disable hardware compression, either from the compression daugther card on the Lamprey or the old compression daugther interface card on the link module… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.77 | ColumnwfPppCircuitMsgLevel | read-write | mandatory | PPP Circuit log messages level. To control level of log messages DBG_MSG_ALL 0x001f0000 - 2031616 DBG_MSG_DEBUG 0x00010000 - 65536 DBG_MSG_INFO 0x00020000 - 13… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.78 | ColumnwfPppCircuitType | read-write | mandatory | To differentiate between a Dial Up PPP circuit from L2TP and Leased Line |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.79 | ColumnwfPppCircuitWRCompatability | read-write | mandatory | Enable WebRanger compatability that allows us to accept a config-ack after receiving an invalid config-req |
| 1.3.6.1.4.1.18.3.5.9.2.3 | TablewfPppWhoamiTable | not-accessible | mandatory | The Wellfleet PPP WHOAMI Table, containing a mapping of peer CHAP Names and the circuit numbers they map to |
| 1.3.6.1.4.1.18.3.5.9.2.3.1 | RowwfPppWhoamiEntry | not-accessible | mandatory | Map the value of this entry's CHAP Name to the value of this entry's CCT number |
| 1.3.6.1.4.1.18.3.5.9.2.3.1.1 | ColumnwfPppWhoamiDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.9.2.3.1.2 | ColumnwfPppWhoamiName | read-only | mandatory | Peer CHAP Name |
| 1.3.6.1.4.1.18.3.5.9.2.3.1.3 | ColumnwfPppWhoamiCircuit | read-write | mandatory | Circuit number to map to |
| 1.3.6.1.4.1.18.3.5.9.2.3.1.4 | ColumnwfPppWhoamiSecret | read-write | mandatory | Peer CHAP Secret |
| 1.3.6.1.4.1.18.3.5.9.2.3.1.5 | ColumnwfPppWhoamiPapPassword | read-write | mandatory | Peer Pap Password |
| 1.3.6.1.4.1.18.3.5.9.2.3.1.6 | ColumnwfPppWhoamiCctGrp | read-write | mandatory | Unnumbered circuit group to map to |
| 1.3.6.1.4.1.18.3.5.9.2.4 | TablewfPppMlStatsTable | not-accessible | mandatory | The Wellfleet PPP Multilink Stats Table, containing statistics for each Multilink Circuit |
| 1.3.6.1.4.1.18.3.5.9.2.4.1 | RowwfPppMlStatsEntry | not-accessible | mandatory | per Wellfleet circuit PPP Multilink counters |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.1 | ColumnwfPppMlStatsDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.2 | ColumnwfPppMlStatsCircuitID | read-only | mandatory | cct number for this instance |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.3 | ColumnwfPppMlStatsHomeSlot | read-only | mandatory | Slot on which this Multilink Control Subsystem exists |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.4 | ColumnwfPppMlStatsLineCnt | read-only | mandatory | Current count of lines in Multilink bundle |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.5 | ColumnwfPppMlStatsBundleSpd | read-only | mandatory | Current total bandwidth of Multilink bundle |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.6 | ColumnwfPppMlStatsMrru | read-only | mandatory | Current Maximum Receive Reconstructed Unit (MRRU) in use for Multilink bundle |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.7 | ColumnwfPppMlStatsEndptDisc | read-only | mandatory | Current Endpoint Discriminator in use for Multilink bundle |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.8 | ColumnwfPppMlStatsTxOctets | read-only | mandatory | Number of octets transmitted by Multilink |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.9 | ColumnwfPppMlStatsTxPkts | read-only | mandatory | Number of packets transmitted by Multilink |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.10 | ColumnwfPppMlStatsAvgTxListLen | read-only | mandatory | Average number of packets received in the transient list by the Multilink Transmit gate. |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.11 | ColumnwfPppMlStatsRxOctets | read-only | mandatory | Number of octets received without error |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.12 | ColumnwfPppMlStatsRxPkts | read-only | mandatory | Number of packets received by Multilink |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.13 | ColumnwfPppMlStatsReasmFails | read-only | mandatory | Number of packet reassembly failures |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.14 | ColumnwfPppMlStatsSeqNumberLost | read-only | mandatory | Number of Multilink packets considered to be lost on the wire |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.15 | ColumnwfPppMlStatsSeqNumberArrivedLate | read-only | mandatory | Number of Multilink packets which arrive containing an old Sequence Number. IE: packets with a more current Sequence Number have already been sent up to NCP |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.16 | ColumnwfPppMlStatsReSeqBufferCnt | read-only | mandatory | Number of Multilink packets currently stored in the ReSequencing buffer pool. |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.17 | ColumnwfPppMlStatsReSeqBufferMax | read-only | mandatory | The Maximum Number of Multilink packets stored in the ReSequencing buffer pool. |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.18 | ColumnwfPppMlStatsExceededBufferMax | read-only | mandatory | The number of times a buffer needed to be stored by the Multilink Receive logic when the count of buffers stored, wfPppMlStatsReSeqBufferMax,was equal to the m… |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.19 | ColumnwfPppMlStatsLinkIdleEvents | read-only | mandatory | The number of times the Multilink Receive logic detected a stored buffer received on a line which has been declared idle. |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.20 | ColumnwfPppMlStatsCalcPercent | read-write | mandatory | enable/disable collection of Rx percentage line usage |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.21 | ColumnwfPppMlStatsDebug | read-write | mandatory | DEBUG parameter - this is used to control debug code for the Multilink subsystem |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.22 | ColumnwfPppMlStatsReassmBufferCnt | read-only | mandatory | Number of Multilink packets currently stored in the Reassembling buffer pools. |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.23 | ColumnwfPppMlStatsReassmBufferMax | read-only | mandatory | The Maximum Number of Multilink packets stored in the Reassembling buffer pools. |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.24 | ColumnwfPppMlStatsNumPktsFragmented | read-only | mandatory | The Number of Multilink packets that were fragmented. |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.25 | ColumnwfPppMlStatsPQHiXmits | read-only | mandatory | High priority transmit count. |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.26 | ColumnwfPppMlStatsPQNormalXmits | read-only | mandatory | Normal priority transmit count. |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.27 | ColumnwfPppMlStatsPQLoXmits | read-only | mandatory | Low priority transmit count |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.28 | ColumnwfPppMlStatsPQHiClippedPkts | read-only | mandatory | High priority transmit clip Count |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.29 | ColumnwfPppMlStatsPQNormalClippedPkts | read-only | mandatory | Normal priority transmit clip Count |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.30 | ColumnwfPppMlStatsPQLoClippedPkts | read-only | mandatory | Low priority transmit clip Count |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.31 | ColumnwfPppMlStatsPQIntrQHighWaterPkts | read-only | mandatory | Interrupt-priority Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.32 | ColumnwfPppMlStatsPQHiQHighWaterPkts | read-only | mandatory | High-priority Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.33 | ColumnwfPppMlStatsPQNormalQHighWaterPkts | read-only | mandatory | Normal-priority Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.34 | ColumnwfPppMlStatsPQLoQHighWaterPkts | read-only | mandatory | Low-priority Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.35 | ColumnwfPppMlStatsPQHighWaterPktsClear | read-write | mandatory | Attribute to clear the high-water marks. When the MIB changes, Priority Queueing (if ENABLED) checks to see if HighWaterPktsClear is different than the last ti… |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.36 | ColumnwfPppMlStatsPQDroppedPkts | read-only | mandatory | Packets which were filtered in Priority Queueing |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.37 | ColumnwfPppMlStatsPQLargePkts | read-only | mandatory | Large Packets which became an exception to latency rules |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.38 | ColumnwfPppMlStatsPQHiTotalOctets | read-only | mandatory | Running total of High Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.39 | ColumnwfPppMlStatsPQNormalTotalOctets | read-only | mandatory | Running total of Normal Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.40 | ColumnwfPppMlStatsPQLoTotalOctets | read-only | mandatory | Running total of Low Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
| 1.3.6.1.4.1.18.3.5.9.2.4.1.41 | ColumnwfPppMlStatsPQPktsNotQueued | read-only | mandatory | Packets that were not Queued or Dropped by Priority Queuing |
| 1.3.6.1.4.1.18.3.5.9.2.5 | TablewfPppBapStatsTable | not-accessible | mandatory | The Wellfleet PPP BAP Stats Table, containing statistics for each BACP Circuit |
| 1.3.6.1.4.1.18.3.5.9.2.5.1 | RowwfPppBapStatsEntry | not-accessible | mandatory | per Wellfleet circuit PPP BAP counters |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.1 | ColumnwfPppBapStatsDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.2 | ColumnwfPppBapStatsCircuitID | read-only | mandatory | cct number for this instance |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.3 | ColumnwfPppBapCallReqTx | read-only | mandatory | Number of Call Requests transmitted by BAP |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.4 | ColumnwfPppBapCallRespAckTx | read-only | mandatory | Number of Call Responses transmitted by BAP with a Response Code of Request_Ack |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.5 | ColumnwfPppBapCallRespNakTx | read-only | mandatory | Number of Call Responses transmitted by BAP with a Response Code of Request_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.6 | ColumnwfPppBapCallRespFullNakTx | read-only | mandatory | Number of Call Responses transmitted by BAP with a Response Code of Request_Full_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.7 | ColumnwfPppBapCallRespRejTx | read-only | mandatory | Number of Call Responses transmitted by BAP with a Response Code of Request_Rej |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.8 | ColumnwfPppBapCallbackReqTx | read-only | mandatory | Number of Callback Requests transmitted by BAP |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.9 | ColumnwfPppBapCallbackRespAckTx | read-only | mandatory | Number of Callback Responses transmitted by BAP with a Response Code of Request_Ack |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.10 | ColumnwfPppBapCallbackRespNakTx | read-only | mandatory | Number of Callback Responses transmitted by BAP with a Response Code of Request_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.11 | ColumnwfPppBapCallbackRespFullNakTx | read-only | mandatory | Number of Callback Responses transmitted by BAP with a Response Code of Request_Full_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.12 | ColumnwfPppBapCallbackRespRejTx | read-only | mandatory | Number of Callback Responses transmitted by BAP with a Response Code of Request_Rej |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.13 | ColumnwfPppBapLdQueryReqTx | read-only | mandatory | Number of LinkDrop Query Requests transmitted by BAP |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.14 | ColumnwfPppBapLdQueryRespAckTx | read-only | mandatory | Number of LinkDrop Query Responses transmitted by BAP with a Response Code of Request_Ack |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.15 | ColumnwfPppBapLdQueryRespNakTx | read-only | mandatory | Number of LinkDrop Query Responses transmitted by BAP with a Response Code of Request_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.16 | ColumnwfPppBapLdQueryRespFullNakTx | read-only | mandatory | Number of LinkDrop Query Responses transmitted by BAP with a Response Code of Request_Full_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.17 | ColumnwfPppBapCallStatusIndFailTx | read-only | mandatory | Number of Call_Status_Indications transmitted by BAP with a non-zero Call Status |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.18 | ColumnwfPppBapCallStatusIndSuccessTx | read-only | mandatory | Number of Call_Status_Indications transmitted by BAP with a zero Call Status |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.19 | ColumnwfPppBapCallStatusRespTx | read-only | mandatory | Number of Call_Status_Response transmitted by BAP |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.20 | ColumnwfPppBapCallReqRx | read-only | mandatory | Number of Call Requests received by BAP |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.21 | ColumnwfPppBapCallRespAckRx | read-only | mandatory | Number of Call Responses received by BAP with a Response Code of Request_Ack |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.22 | ColumnwfPppBapCallRespNakRx | read-only | mandatory | Number of Call Responses received by BAP with a Response Code of Request_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.23 | ColumnwfPppBapCallRespFullNakRx | read-only | mandatory | Number of Call Responses received by BAP with a Response Code of Request_Full_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.24 | ColumnwfPppBapCallRespRejRx | read-only | mandatory | Number of Call Responses received by BAP with a Response Code of Request_Rej |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.25 | ColumnwfPppBapCallbackReqRx | read-only | mandatory | Number of Callback Requests received by BAP |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.26 | ColumnwfPppBapCallbackRespAckRx | read-only | mandatory | Number of Callback Responses received by BAP with a Response Code of Request_Ack |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.27 | ColumnwfPppBapCallbackRespNakRx | read-only | mandatory | Number of Callback Responses received by BAP with a Response Code of Request_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.28 | ColumnwfPppBapCallbackRespFullNakRx | read-only | mandatory | Number of Callback Responses received by BAP with a Response Code of Request_Full_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.29 | ColumnwfPppBapCallbackRespRejRx | read-only | mandatory | Number of Callback Responses received by BAP with a Response Code of Request_Rej |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.30 | ColumnwfPppBapLdQueryReqRx | read-only | mandatory | Number of LinkDrop Query Requests received by BAP |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.31 | ColumnwfPppBapLdQueryRespAckRx | read-only | mandatory | Number of LinkDrop Query Responses received by BAP with a Response Code of Request_Ack |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.32 | ColumnwfPppBapLdQueryRespNakRx | read-only | mandatory | Number of LinkDrop Query Responses received by BAP with a Response Code of Request_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.33 | ColumnwfPppBapLdQueryRespFullNakRx | read-only | mandatory | Number of LinkDrop Query Responses received by BAP with a Response Code of Request_Full_Nak |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.34 | ColumnwfPppBapCallStatusIndFailRx | read-only | mandatory | Number of Call_Status_Indications received by BAP with a non-zero Call Status |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.35 | ColumnwfPppBapCallStatusIndSuccessRx | read-only | mandatory | Number of Call_Status_Indications received by BAP with a zero Call Status |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.36 | ColumnwfPppBapCallStatusRespRx | read-only | mandatory | Number of Call_Status_Response received by BAP |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.37 | ColumnwfPppBapCallReqRespDiscardRx | read-only | mandatory | Number of Call_Response received by BAP with an old identifier. |
| 1.3.6.1.4.1.18.3.5.9.2.5.1.38 | ColumnwfPppBapCallbackReqRespDiscardRx | read-only | mandatory | Number of Callback_Response received by BAP with an old identifier. |