Wellfleet-RF-MIB
95 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.1.8 | TablewfIpRfRipImportTable | not-accessible | mandatory | The list of Rip Import Route Filter Rules in IP |
| 1.3.6.1.4.1.18.3.5.3.2.1.8.1 | RowwfIpRfRipImportEntry | not-accessible | mandatory | An entry in the Rip Import Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.8.1.1 | ColumnwfIpRfRipImportCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.8.1.2 | ColumnwfIpRfRipImportEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.8.1.3 | ColumnwfIpRfRipImportAddress | read-only | mandatory | The IP address to which this filter applies |
| 1.3.6.1.4.1.18.3.5.3.2.1.8.1.4 | ColumnwfIpRfRipImportMask | read-only | mandatory | The Mask to which this filter applies. When combined with the Address, a range is specified for application of this rule |
| 1.3.6.1.4.1.18.3.5.3.2.1.8.1.5 | ColumnwfIpRfRipImportAction | read-write | mandatory | The Action of this Filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.8.1.6 | ColumnwfIpRfRipImportPreference | read-write | mandatory | The Preference associated with this filter - only valid if accept |
| 1.3.6.1.4.1.18.3.5.3.2.1.8.1.7 | ColumnwfIpRfRipImportRipGateway | read-only | mandatory | The RIP Gateway to be concerned with |
| 1.3.6.1.4.1.18.3.5.3.2.1.8.1.8 | ColumnwfIpRfRipImportRipInterface | read-only | mandatory | The IP Network Interface to be concerned with |
| 1.3.6.1.4.1.18.3.5.3.2.1.8.1.9 | ColumnwfIpRfRipImportApplyMask | read-write | mandatory | The Mask to apply to this route learned instead of the default. NULL means to apply the normal filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.9 | TablewfIpRfRipExportTable | not-accessible | mandatory | The list of Rip Export Route Filter Rules in IP |
| 1.3.6.1.4.1.18.3.5.3.2.1.9.1 | RowwfIpRfRipExportEntry | not-accessible | mandatory | An entry in the Rip Export Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.9.1.1 | ColumnwfIpRfRipExportCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.9.1.2 | ColumnwfIpRfRipExportEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.9.1.3 | ColumnwfIpRfRipExportAddress | read-only | mandatory | The IP address to which this filter applies |
| 1.3.6.1.4.1.18.3.5.3.2.1.9.1.4 | ColumnwfIpRfRipExportMask | read-only | mandatory | The Mask for the Address Above. When combined with the Address, a range is specified for application of this filter rule |
| 1.3.6.1.4.1.18.3.5.3.2.1.9.1.5 | ColumnwfIpRfRipExportFromProtocol | read-only | mandatory | The protocol from which this Information is derived |
| 1.3.6.1.4.1.18.3.5.3.2.1.9.1.6 | ColumnwfIpRfRipExportAction | read-write | mandatory | The action of this export filter; if IP_RF_RIP_EXP_ACTION_AGGREGATE action, the default route, 0.0.0.0, is advertised instead networks that match this filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.9.1.7 | ColumnwfIpRfRipExportInterface | read-only | mandatory | The optional outbound interface on which to apply this filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.9.1.8 | ColumnwfIpRfRipExportRipMetric | read-write | mandatory | The optional export RIP metric to apply to this filter. Zero means: use the route's actual cost. Only valid for propagate |
| 1.3.6.1.4.1.18.3.5.3.2.1.10 | TablewfIpRfOspfImportTable | not-accessible | mandatory | The list of OSPF Import Route Filter Rules in IP |
| 1.3.6.1.4.1.18.3.5.3.2.1.10.1 | RowwfIpRfOspfImportEntry | not-accessible | mandatory | An entry in the OSPF Import Route Filter Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.10.1.1 | ColumnwfIpRfOspfImportCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.10.1.2 | ColumnwfIpRfOspfImportEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.10.1.3 | ColumnwfIpRfOspfImportAddress | read-only | mandatory | The IP Address to which this filter applies |
| 1.3.6.1.4.1.18.3.5.3.2.1.10.1.4 | ColumnwfIpRfOspfImportMask | read-only | mandatory | The Mask to which this filter applies. When combined with the Address, a range is specified for application of this rule |
| 1.3.6.1.4.1.18.3.5.3.2.1.10.1.5 | ColumnwfIpRfOspfImportAction | read-write | mandatory | The Action of this Filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.10.1.6 | ColumnwfIpRfOspfImportPreference | read-write | mandatory | The Preference associated with this filter - only valid if accept |
| 1.3.6.1.4.1.18.3.5.3.2.1.10.1.7 | ColumnwfIpRfOspfImportType | read-only | mandatory | The OSPF route Type to be concerned with. The valid values are null (any route type), 1 (OSPF external type 1), and 2 (OSPF external type 2). |
| 1.3.6.1.4.1.18.3.5.3.2.1.10.1.8 | ColumnwfIpRfOspfImportTag | read-only | mandatory | The OSPF Tag to be concerned with |
| 1.3.6.1.4.1.18.3.5.3.2.1.11 | TablewfIpRfOspfExportTable | not-accessible | mandatory | The list of OSPF Export Route Filter Rules in IP |
| 1.3.6.1.4.1.18.3.5.3.2.1.11.1 | RowwfIpRfOspfExportEntry | not-accessible | mandatory | An entry in the OSPF Export Route Filter Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.11.1.1 | ColumnwfIpRfOspfExportCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.11.1.2 | ColumnwfIpRfOspfExportEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.11.1.3 | ColumnwfIpRfOspfExportAddress | read-only | mandatory | The IP address to which this filter applies |
| 1.3.6.1.4.1.18.3.5.3.2.1.11.1.4 | ColumnwfIpRfOspfExportMask | read-only | mandatory | The Mask for the Address Above. When combined with the Address, a range is specified for application of this filter rule |
| 1.3.6.1.4.1.18.3.5.3.2.1.11.1.5 | ColumnwfIpRfOspfExportFromProtocol | read-only | mandatory | The protocol from which this Information is derived |
| 1.3.6.1.4.1.18.3.5.3.2.1.11.1.6 | ColumnwfIpRfOspfExportAction | read-write | mandatory | The action of this export filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.11.1.7 | ColumnwfIpRfOspfExportType | read-write | mandatory | The ospf type to use when this filter matches |
| 1.3.6.1.4.1.18.3.5.3.2.1.11.1.8 | ColumnwfIpRfOspfExportTag | read-write | mandatory | The ospf tag to use when this filter matches |
| 1.3.6.1.4.1.18.3.5.3.2.1.11.1.9 | ColumnwfIpRfOspfExportAutoTag | read-write | mandatory | BGP/OSPF automatic tag generation: if enabled, a tag will be generated according to the criteria in RFC 1364. Only valid if wfIpRfOspfExportType is set. If ena… |
| 1.3.6.1.4.1.18.3.5.3.2.1.12 | TablewfIpRfEgpImportTable | not-accessible | mandatory | The list of Egp Import Route Filter Rules in IP |
| 1.3.6.1.4.1.18.3.5.3.2.1.12.1 | RowwfIpRfEgpImportEntry | not-accessible | mandatory | An entry in the Egp Import Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.12.1.1 | ColumnwfIpRfEgpImportCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.12.1.2 | ColumnwfIpRfEgpImportEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.12.1.3 | ColumnwfIpRfEgpImportAddress | read-only | mandatory | The advertised network to which this filter applies |
| 1.3.6.1.4.1.18.3.5.3.2.1.12.1.4 | ColumnwfIpRfEgpImportMask | read-only | mandatory | The Mask of the Address to which this filter applies. |
| 1.3.6.1.4.1.18.3.5.3.2.1.12.1.5 | ColumnwfIpRfEgpImportAction | read-write | mandatory | The Action of this Filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.12.1.6 | ColumnwfIpRfEgpImportPreference | read-write | mandatory | The Preference associated with this filter - only valid if accept |
| 1.3.6.1.4.1.18.3.5.3.2.1.12.1.7 | ColumnwfIpRfEgpImportPeer | read-only | mandatory | The Egp Peer to be to be concerned with |
| 1.3.6.1.4.1.18.3.5.3.2.1.12.1.8 | ColumnwfIpRfEgpImportAs | read-only | mandatory | The Autonomous System number to be concerned with |
| 1.3.6.1.4.1.18.3.5.3.2.1.12.1.9 | ColumnwfIpRfEgpImportGateway | read-only | mandatory | The EGP gateway to be concerned with |
| 1.3.6.1.4.1.18.3.5.3.2.1.13 | TablewfIpRfEgpExportTable | not-accessible | mandatory | The list of Egp Export Route Filter Rules in IP |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1 | RowwfIpRfEgpExportEntry | not-accessible | mandatory | An entry in the Egp Export Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.1 | ColumnwfIpRfEgpExportCreate | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.2 | ColumnwfIpRfEgpExportEnable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.3 | ColumnwfIpRfEgpExportAddress | read-only | mandatory | The advertised network to which this filter applies |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.4 | ColumnwfIpRfEgpExportMask | read-only | mandatory | The Mask of the Address to which this filter applies. |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.5 | ColumnwfIpRfEgpExportFromProtocol | read-only | mandatory | The protocol from which this Information is derived |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.6 | ColumnwfIpRfEgpExportAction | read-write | mandatory | The action of this export filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.7 | ColumnwfIpRfEgpExportPeer | read-only | mandatory | The Egp Peer to be to be concerned with |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.8 | ColumnwfIpRfEgpExportOspfType | read-only | mandatory | The type of route being filtered. This field is only valid if the wfIpRfEgpExportFromProtocol is OSPF. Otherwise, the field is 0. |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.9 | ColumnwfIpRfEgpExportOspfTag | read-only | mandatory | The tag of the route being filtered. This field is only valid if the wfIpRfEgpExportFromProtocol is OSPF. Otherwise, this field is 0. |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.10 | ColumnwfIpRfEgpExportInterface | read-write | mandatory | The optional outbound interface on which to apply this filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.13.1.11 | ColumnwfIpRfEgpExportMetric | read-write | mandatory | The optional export Egp metric to apply to this filter. Zero means: use the route's actual cost. Only valid for propagate |
| 1.3.6.1.4.1.18.3.5.3.2.1.14 | TablewfIpRfBgp3ImportTable | not-accessible | mandatory | The table of BGP-3 Import Route Filter Rules |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1 | RowwfIpRfBgp3ImportEntry | not-accessible | mandatory | An entry in the BGP-3 Import Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.1 | ColumnwfIpRfBgp3ImportCreate | read-write | mandatory | Create/Delete parameter. if set to delete, the rule is removed. |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.2 | ColumnwfIpRfBgp3ImportEnable | read-write | mandatory | Enable/Disable parameter. controls whether the rule is enabled or disabled. |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.3 | ColumnwfIpRfBgp3ImportAddress | read-only | mandatory | The advertised network to which this filter applies. Zero implies `all networks' or the default route, based on wfIpRfBgp3ImportMask. |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.4 | ColumnwfIpRfBgp3ImportMask | read-only | mandatory | The mask applied to wfIpRfBgp3ImportAddress. If zero, this filter applies to all networks. If the address is zero and this parameter is 255.255.255.255, this f… |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.5 | ColumnwfIpRfBgp3ImportAction | read-write | mandatory | The Action of this Filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.6 | ColumnwfIpRfBgp3ImportPreference | read-write | mandatory | The Preference associated with this filter - only valid if accept |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.7 | ColumnwfIpRfBgp3ImportPeerAs | read-only | mandatory | The BGP-3 Peer's AS number (or zero if `any AS') |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.8 | ColumnwfIpRfBgp3ImportPeerAddress | read-only | mandatory | The IP address (not the peer ID) of the peer that this advertisement was received from (zero if `any peer') |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.9 | ColumnwfIpRfBgp3ImportOrigAs | read-only | mandatory | The AS number of the BGP-3 gateway that originated the route (or zero for `any AS') |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.10 | ColumnwfIpRfBgp3ImportRouteOrigin | read-only | mandatory | A value for the ORIGIN path attribute (or zero if not applicable) |
| 1.3.6.1.4.1.18.3.5.3.2.1.14.1.11 | ColumnwfIpRfBgp3ImportBgp3Preference | read-write | mandatory | The Preference associated with this filter for comparison to other BGP routes only - only valid if accept |
| 1.3.6.1.4.1.18.3.5.3.2.1.15 | TablewfIpRfBgp3ExportTable | not-accessible | mandatory | The table of BGP-3 Export Route Filter Rules |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1 | RowwfIpRfBgp3ExportEntry | not-accessible | mandatory | An entry in the BGP-3 Export Rule Table |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.1 | ColumnwfIpRfBgp3ExportCreate | read-write | mandatory | Create/Delete: if set to delete, the rule is removed |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.2 | ColumnwfIpRfBgp3ExportEnable | read-write | mandatory | Enable/Disable: controls whether the rule is enabled or disabled |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.3 | ColumnwfIpRfBgp3ExportAddress | read-only | mandatory | The advertised network to which this filter applies. Zero implies `all networks' or the default route, based on wfIpRfBgp3ExportMask. |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.4 | ColumnwfIpRfBgp3ExportMask | read-only | mandatory | The mask applied to wfIpRfBgp3ExportAddress. If zero, this filter applies to all networks. If the address is zero and this parameter is 255.255.255.255, this f… |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.5 | ColumnwfIpRfBgp3ExportFromProtocol | read-only | mandatory | The protocol from which this Information is derived |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.6 | ColumnwfIpRfBgp3ExportAction | read-write | mandatory | The action of this export filter; if IP_RF_BGP3_EXP_ACTION_AGGREGATE action, the default route, 0.0.0.0, is advertised instead networks that match this filter |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.7 | ColumnwfIpRfBgp3ExportPeerAs | read-only | mandatory | The AS number to which the network advertisement is going (zero if `any AS') |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.8 | ColumnwfIpRfBgp3ExportPeerAddress | read-only | mandatory | The IP address (not the peer ID) of the peer that this advertisement is going to (zero if `any peer') |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.9 | ColumnwfIpRfBgp3ExportOspfType | read-only | mandatory | The type of route being filtered. This field is only valid if the wfIpRfEgpExportFromProtocol is OSPF. Otherwise, the field is 0. |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.10 | ColumnwfIpRfBgp3ExportOspfTag | read-only | mandatory | The OSPF tag of the route being filtered. This field is only valid if the wfIpRfBgp3ExportFromProtocol is OSPF and wfIpRfBgp3ExportOspfType is external type 1 … |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.11 | ColumnwfIpRfBgp3ExportUseMetric | read-write | mandatory | Determines whether or not an INTER_AS_METRIC will be advertised for the associated network(s). none (1) indicates that no metric will be advertised. specified … |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.12 | ColumnwfIpRfBgp3ExportInterAsMetric | read-write | mandatory | If wfIpRfBgp3ExportUseMetric is set to specified (2), this is the value that will be used for the INTER_AS_METRIC. Only valid for propagate. |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.13 | ColumnwfIpRfBgp3ExportOrigin | read-write | mandatory | The value to use for the ORIGIN path attribute when advertising this route (zero means `do according to default'). Only valid for propagate action. Only valid … |
| 1.3.6.1.4.1.18.3.5.3.2.1.15.1.14 | ColumnwfIpRfBgp3ExportNeighAs | read-write | mandatory | If action is propagate, route origin is RIP or STATIC, and ExportOrigin is EGP, this AS number is used as the EGP neighbor AS number when constructing the AS-P… |