Wellfleet-SMDS-MIB
20 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.3 | TablewfSmdsCircuitTable | not-accessible | mandatory | The Wellfleet SMDS Circuit Record |
| 1.3.6.1.4.1.18.3.5.9.3.1 | RowwfSmdsCircuitEntry | not-accessible | mandatory | per Wellfleet circuit SMDS configuration parameters and counters |
| 1.3.6.1.4.1.18.3.5.9.3.1.1 | ColumnwfSmdsCircuitDelete | read-write | mandatory | create/delete parameter, dflt = created |
| 1.3.6.1.4.1.18.3.5.9.3.1.2 | ColumnwfSmdsCircuitDisable | read-write | mandatory | enable/disable parameter, dflt = enabled |
| 1.3.6.1.4.1.18.3.5.9.3.1.3 | ColumnwfSmdsCircuitState | read-only | mandatory | SMDS state variable, Up, Down Init, Not Present |
| 1.3.6.1.4.1.18.3.5.9.3.1.4 | ColumnwfSmdsCircuitID | read-only | mandatory | cct number for this instance |
| 1.3.6.1.4.1.18.3.5.9.3.1.5 | ColumnwfSmdsCircuitIndivAddr | read-write | mandatory | SMDS E.164 Individual address for this Wellfleet circuit - must be 8 octets long |
| 1.3.6.1.4.1.18.3.5.9.3.1.6 | ColumnwfSmdsCircuitGroupAddr | read-write | mandatory | SMDS E.164 Group address for this Wellfleet circuit - must be 8 octets long |
| 1.3.6.1.4.1.18.3.5.9.3.1.7 | ColumnwfSmdsCircuitArpAddr | read-write | mandatory | SMDS E.164 ARP address for this Wellfleet circuit - must be 8 octets long |
| 1.3.6.1.4.1.18.3.5.9.3.1.8 | ColumnwfSmdsCircuitDisableHrtbtPoll | read-write | mandatory | determine use of DXI heartbeat poll |
| 1.3.6.1.4.1.18.3.5.9.3.1.9 | ColumnwfSmdsCircuitHrtbtPollInterval | read-write | mandatory | heartbeat polling messages get sent every this many seconds - we don't want the polling interval to be less than or equal to the unacknowledgment timer, which … |
| 1.3.6.1.4.1.18.3.5.9.3.1.10 | ColumnwfSmdsCircuitHrtbtPollDownCount | read-write | mandatory | if this many consecutive heartbeat polling messages go unacknowledged, log an event declaring the line down |
| 1.3.6.1.4.1.18.3.5.9.3.1.11 | ColumnwfSmdsCircuitDisableNetMgmt | read-write | mandatory | determine use of LMI network management |
| 1.3.6.1.4.1.18.3.5.9.3.1.12 | ColumnwfSmdsCircuitSipL3ReceivedIndividualDAs | read-only | mandatory | The total number of individually addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs. |
| 1.3.6.1.4.1.18.3.5.9.3.1.13 | ColumnwfSmdsCircuitSipL3ReceivedGAs | read-only | mandatory | The total number of group addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs. |
| 1.3.6.1.4.1.18.3.5.9.3.1.14 | ColumnwfSmdsCircuitSipL3SentIndividualDAs | read-only | mandatory | The number of individually addressed SIP Level 3 PDUs that have been sent by this system across the SNI. |
| 1.3.6.1.4.1.18.3.5.9.3.1.15 | ColumnwfSmdsCircuitSipL3SentGAs | read-only | mandatory | The number of group addressed SIP L3PDUs that have been sent by this system across the SNI. |
| 1.3.6.1.4.1.18.3.5.9.3.1.16 | ColumnwfSmdsCircuitSipL3VersionSupport | read-only | mandatory | A value which indicates the version(s) of SIP that this interface supports. The value is a sum. This sum initially takes the value zero. For each version, V, t… |
| 1.3.6.1.4.1.18.3.5.9.3.1.17 | ColumnwfSmdsCircuitDisableAddrVerify | read-write | mandatory | This object enables/disables verification checking of destination addresses in received packets. |
| 1.3.6.1.4.1.18.3.5.9.3.1.18 | ColumnwfSmdsCircuitAddrVerifyDiscards | read-only | mandatory | This is the count of SMDS PDUs discarded due to mismatched group or individual addresses |