Wellfleet-SWSMDS-MIB
158 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.7.1 | TablewfSmdsSwSubTable | not-accessible | mandatory | The Wellfleet SMDS Switch Circuit (SNI, subscriber) Record. This record holds information on a per circuit (SSI, SNI, subscriber) basis. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1 | RowwfSmdsSwSubEntry | not-accessible | mandatory | Per Wellfleet circuit SMDS Switch configuration parameters and counters. This table contains Subscriber-Network Interface (SNI) parameters and state variables,… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.1 | ColumnwfSmdsSwSubDelete | read-write | mandatory | create/delete parameter, dflt = created |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.2 | ColumnwfSmdsSwSubDisable | read-write | mandatory | enable/disable parameter, dflt = enabled |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.3 | ColumnwfSmdsSwSubState | read-only | mandatory | SMDS Switch state variable, Up, Down Init, Not Present |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.4 | ColumnwfSmdsSwSubCct | read-only | mandatory | cct number for this instance |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.5 | ColumnwfSmdsSwSubDisableHrtbtPoll | read-write | mandatory | determine use of DXI heartbeat poll |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.6 | ColumnwfSmdsSwSubHrtbtPollAddr | read-write | mandatory | determine if heartbeat poll messages are sent as as CPE or network (CSU/DSU) messages. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.7 | ColumnwfSmdsSwSubHrtbtPollInterval | read-write | mandatory | heartbeat polling messages get sent every this many seconds - we don't want the polling interval to be less than or equal to the no-acknowledgment timer. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.8 | ColumnwfSmdsSwSubHrtbtPollDownCount | read-write | mandatory | if this many consecutive heartbeat polling messages go unacknowledged, log an event declaring the line down |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.9 | ColumnwfSmdsSwSubDisableNetMgmt | read-write | mandatory | determine use of LMI network management |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.10 | ColumnwfSmdsSwSubInterfaceType | read-write | mandatory | defines whether this interface is a SNI or SSI. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.11 | ColumnwfSmdsSwSubInterfaceIndex | read-write | mandatory | The index number for the SSI/SNI. Each SNI in the network has a unique id. The value of this object identifies the SIP port interface for which this entry cont… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.12 | ColumnwfSmdsSwSubDisableL3PduChecks | read-write | mandatory | Enable/Disable L3_PDU verification. Default is disabled. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.13 | ColumnwfSmdsSwSubDisableUsageGeneration | read-write | mandatory | enable/disable usage data generation. Default is disabled. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.14 | ColumnwfSmdsSwSubDisableMIR | read-write | mandatory | enable/disable MIR enforcement, default is disabled. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.15 | ColumnwfSmdsSwSubUnassignedSAs | read-only | mandatory | The total number of SIP Level 3 PDUs discarded by the SMDS Switch because the Source Address was not assigned to the SNI. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.16 | ColumnwfSmdsSwSubSAScreenViolations | read-only | mandatory | The number of SIP L3_PDUs that violated the address screen based on source address screening for an SNI. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.17 | ColumnwfSmdsSwSubDAScreenViolations | read-only | mandatory | The total number of SIP Level 3 PDUs that violated the Destination Address Screening using either an Individual Address Screen or a Group Address Screen for th… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.18 | ColumnwfSmdsSwSubNumPDUExceededMIR | read-only | mandatory | The total number of SIP L3_PDUs that exceeded the MIR on this interface. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.19 | ColumnwfSmdsSwSubSipL3ReceivedIAs | read-only | mandatory | The total number of individually addressed SIP Level 3 PDUs received by the SMDS Switch from the CPE. The total includes only unerrored L3PDUs. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.20 | ColumnwfSmdsSwSubSipL3ReceivedGAs | read-only | mandatory | The total number of group addressed SIP Level 3 PDUs received by the SMDS Switch from the CPE. The total includes only unerrored L3PDUs. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.21 | ColumnwfSmdsSwSubSipL3UnrecIAs | read-only | mandatory | The number of SIP Level 3 PDUs received by the SMDS Switch from the CPE that have an unknown, valid, individual SMDS Destination Address. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.22 | ColumnwfSmdsSwSubSipL3UnrecGAs | read-only | mandatory | The number of SIP Level 3 PDUs received by the SMDS Switch from the CPE that have an unknown, valid, group SMDS Destination Address. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.23 | ColumnwfSmdsSwSubSipL3SentIAs | read-only | mandatory | The number of individually addressed SIP Level 3 PDUs that have been sent by this SMDS Switch to the CPE. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.24 | ColumnwfSmdsSwSubSipL3SentGAs | read-only | mandatory | The number of group addressed SIP L3PDUs that have been sent by this SMDS Switch to the CPE. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.25 | ColumnwfSmdsSwSubSipL3Errors | read-only | mandatory | The total number of SIP Level 3 PDUs received by the SMDS Switch from the CPE that were discovered to have protocol errors. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.26 | ColumnwfSmdsSwSubSipL3InvAddrTypes | read-only | mandatory | The total number of SIP Level 3 PDUs received by the SMDS Switch from the CPE that had a value in the Source or Destination Address type subfield other than gr… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.27 | ColumnwfSmdsSwSubSipL3VersionSupport | read-only | mandatory | A value which indicates the version(s) of SIP that this SNI supports. The value is a sum. This sum initially takes the value zero. For each version, V, that th… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.28 | ColumnwfSmdsSwSubSAScrnViolationOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded as a result of a Source Ad… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.29 | ColumnwfSmdsSwSubDAScrnViolationOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded as a result of a Destinati… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.30 | ColumnwfSmdsSwSubUnassignedSAOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded as a result of a unassigne… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.31 | ColumnwfSmdsSwSubSAErrorOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because of a Source Addres… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.32 | ColumnwfSmdsSwSubDAErrorOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because of a Destination A… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.33 | ColumnwfSmdsSwSubInvalidBASizeOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because of an invalid BASi… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.34 | ColumnwfSmdsSwSubInvalidHELenOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because of an invalid Head… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.35 | ColumnwfSmdsSwSubInvalidHEVerOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because of an invalid Head… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.36 | ColumnwfSmdsSwSubInvalidHECarOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because of an invalid Head… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.37 | ColumnwfSmdsSwSubInvalidHEPadOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because of an invalid Head… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.38 | ColumnwfSmdsSwSubBEtagOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because of a Beginning-End… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.39 | ColumnwfSmdsSwSubBAsizeNELenOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because the BAsize and Len… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.40 | ColumnwfSmdsSwSubIncorrectLenOccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because of an incorrect le… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.41 | ColumnwfSmdsSwSubExceededMIROccur | read-only | mandatory | A string containing the SMDS Source Address, Destination Address, and Event time of the most recent occurance of an L3_PDU discarded because it exceeded the MI… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.42 | ColumnwfSmdsSwSubInBandMgmtDisable | read-write | mandatory | In-Band Management enable/disable parameter. This attribute indicates whether the local WSNI (only) is enabled to run IP in Host mode, for in-band management p… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.43 | ColumnwfSmdsSwSubInBandMgmtLocalAddr | read-write | mandatory | Special SMDS E.164 Individual address that identifies this local circuit. This attribute is only used when the wfSmdsSwSubInBandMgmtDisable attribute is set to… |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.44 | ColumnwfSmdsSwSubInBandMgmtReceivedPDUs | read-only | mandatory | The total number of individually addressed In-Band Management PDUs received by the SMDS Switch from the CPE. The total includes only unerrored PDUs. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.45 | ColumnwfSmdsSwSubInBandMgmtSentPDUs | read-only | mandatory | The number of individually addressed In-Band Management PDUs that have been sent by this SMDS Switch to the CPE. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.46 | ColumnwfSmdsSwSubInBandMgmtMaxLenErrors | read-only | mandatory | The number of In-Band Management PDUs that have exceeded the MTU size configured for the line |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.47 | ColumnwfSmdsSwSubInBandMgmtEncapsErrors | read-only | mandatory | The number of In-Band Management PDUs that have invalid encapsulation schemes |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.48 | ColumnwfSmdsSwSubGAPartialResolve | read-only | mandatory | The number of times group addressed L3_PDU's could not be resolved due to congestion. |
| 1.3.6.1.4.1.18.3.5.9.7.1.1.49 | ColumnwfSmdsSwSubDANotOnSni | read-only | mandatory | The number of times a L3_PDU was discarded at the egress because the destination address was not assigned to the SNI. |
| 1.3.6.1.4.1.18.3.5.9.7.2 | TablewfSmdsSwEndpTable | not-accessible | mandatory | The Parameters for the Endpoint table. An Endpoint is defined as an IP address, SMDS E.164 address pair. Endpoint ranges should never overlap. |
| 1.3.6.1.4.1.18.3.5.9.7.2.1 | RowwfSmdsSwEndpEntry | not-accessible | mandatory | The parameters for a particular Endpoint. |
| 1.3.6.1.4.1.18.3.5.9.7.2.1.1 | ColumnwfSmdsSwEndpDelete | read-write | mandatory | Indication to delete this endpoint entry. |
| 1.3.6.1.4.1.18.3.5.9.7.2.1.2 | ColumnwfSmdsSwEndpE164AddrHigh | read-only | mandatory | The High end of the E.164 address range for this endpoint information. |
| 1.3.6.1.4.1.18.3.5.9.7.2.1.3 | ColumnwfSmdsSwEndpE164AddrDelta | read-only | mandatory | The difference between wfSmdsSwEndpE164AddrHigh to the beginning of the endpoint information. |
| 1.3.6.1.4.1.18.3.5.9.7.2.1.4 | ColumnwfSmdsSwEndpInterfaceIndex | read-only | mandatory | This number indicates which SNI the endpoint information refers to. |
| 1.3.6.1.4.1.18.3.5.9.7.3 | TablewfSmdsSwInterfaceTable | not-accessible | mandatory | This is the Interface Table. This table also holds the Maximum Information Rate (MIR) information. |
| 1.3.6.1.4.1.18.3.5.9.7.3.1 | RowwfSmdsSwInterfaceEntry | not-accessible | mandatory | This table defines the IP addresses and what interfaces they are associated with. |
| 1.3.6.1.4.1.18.3.5.9.7.3.1.1 | ColumnwfSmdsSwInterfaceDelete | read-write | mandatory | Indication to delete this interface entry. |
| 1.3.6.1.4.1.18.3.5.9.7.3.1.2 | ColumnwfSmdsSwInterfaceType | read-only | mandatory | This number determines whether the interface information refers to an SNI, SSI, or ICI. |
| 1.3.6.1.4.1.18.3.5.9.7.3.1.3 | ColumnwfSmdsSwInterfaceIndex | read-only | mandatory | This number indicates which SNI, SSI, or ICI the interface information refers to. |
| 1.3.6.1.4.1.18.3.5.9.7.3.1.4 | ColumnwfSmdsSwInterfaceIpAddr | read-write | mandatory | IP Address associated with the interface. |
| 1.3.6.1.4.1.18.3.5.9.7.3.1.5 | ColumnwfSmdsSwInterfaceMIR | read-write | mandatory | This number represents the MIR in octets per second. |
| 1.3.6.1.4.1.18.3.5.9.7.3.1.6 | ColumnwfSmdsSwInterfaceCurrentRate | read-only | mandatory | This number indicates the current rate of traffic flow to the interface. The software updates this counter. When this attribute exceeds wfSmdsSwInterfaceMIR tr… |
| 1.3.6.1.4.1.18.3.5.9.7.4 | TablewfSmdsSwAssocScrnTable | not-accessible | mandatory | This list identifies the associated SNI addresses per individualand group address screen. Different addresses on an SNI may be associated with different indivi… |
| 1.3.6.1.4.1.18.3.5.9.7.4.1 | RowwfSmdsSwAssocScrnEntry | not-accessible | mandatory | An SNI index, group and individual screening list index, and the associated addresses for the SNI for the address screens. |
| 1.3.6.1.4.1.18.3.5.9.7.4.1.1 | ColumnwfSmdsSwAssocScrnDelete | read-write | mandatory | Indication to delete this associated screen entry. |
| 1.3.6.1.4.1.18.3.5.9.7.4.1.2 | ColumnwfSmdsSwAssocScrnSniIndex | read-only | mandatory | The value of this object identifies the SIP Port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.18.3.5.9.7.4.1.3 | ColumnwfSmdsSwAssocScrnAddrInd | read-only | mandatory | The value of this object identifies one of the SMDS addresses for the SNI, identified by the wfSmdsSwAssocScrnSniIndex that belongs to this individual (or grou… |
| 1.3.6.1.4.1.18.3.5.9.7.4.1.4 | ColumnwfSmdsSwAssocScrnIndivIndex | read-only | mandatory | The value of this object identifies the individual address screening list. There is at least one individual address screen and at most s individual address scr… |
| 1.3.6.1.4.1.18.3.5.9.7.4.1.5 | ColumnwfSmdsSwAssocScrnGrpIndex | read-only | mandatory | The value of this object identifies the group address screening list. There is at least one group address screen and at most s group address screens per SNI. T… |
| 1.3.6.1.4.1.18.3.5.9.7.5 | TablewfSmdsSwIAScrnTable | not-accessible | mandatory | This list identifies the individual addresses that will be screened per individual address screen table. The are up to s (s is equal to 4) individual address s… |
| 1.3.6.1.4.1.18.3.5.9.7.5.1 | RowwfSmdsSwIAScrnEntry | not-accessible | mandatory | An SNI index, a screening list index, the individual addresses to be screened for the individual address screen, and whether the screened address is valid or i… |
| 1.3.6.1.4.1.18.3.5.9.7.5.1.1 | ColumnwfSmdsSwIAScrnDelete | read-write | mandatory | Indication to delete this IA screen entry. |
| 1.3.6.1.4.1.18.3.5.9.7.5.1.2 | ColumnwfSmdsSwIAScrnSniIndex | read-only | mandatory | The value of this object identifies the SIP Port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.18.3.5.9.7.5.1.3 | ColumnwfSmdsSwIAScrnIndex | read-only | mandatory | The value of this object identifies the individual address screening list. There are at least one individual address screen and at most s individual address sc… |
| 1.3.6.1.4.1.18.3.5.9.7.5.1.4 | ColumnwfSmdsSwIAScrnAddr | read-only | mandatory | The value of this object identifies one of the individual addresses to be screened for source and destination address screening for the SNI identified by the w… |
| 1.3.6.1.4.1.18.3.5.9.7.6 | TablewfSmdsSwGAScrnTable | not-accessible | mandatory | This list identifies the group addresses that will be screened per group address screen table. The are up to s (s is equal to 4) group address screens per SNI … |
| 1.3.6.1.4.1.18.3.5.9.7.6.1 | RowwfSmdsSwGAScrnEntry | not-accessible | mandatory | An SNI index, a screening list index, the group addresses to be screened for the group address screen, and whether the screened address is valid or invalid. |
| 1.3.6.1.4.1.18.3.5.9.7.6.1.1 | ColumnwfSmdsSwGAScrnDelete | read-write | mandatory | Indication to delete this GA screen entry. |
| 1.3.6.1.4.1.18.3.5.9.7.6.1.2 | ColumnwfSmdsSwGAScrnSniIndex | read-only | mandatory | The value of this object identifies the SIP Port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.18.3.5.9.7.6.1.3 | ColumnwfSmdsSwGAScrnIndex | read-only | mandatory | The value of this object identifies the group address screening list. There is at least one group address screen and at most s group address screens per SNI. T… |
| 1.3.6.1.4.1.18.3.5.9.7.6.1.4 | ColumnwfSmdsSwGAScrnAddr | read-only | mandatory | The value of this object identifies one of the group addresses to be screened for destination address screening for the SNI identified by the wfSmdsSwGAScrnSni… |
| 1.3.6.1.4.1.18.3.5.9.7.7 | TablewfSmdsSwGATable | not-accessible | mandatory | A table of all group addresses in the network and the associated individual addresses identified by each group address. A group address identifies up to m indi… |
| 1.3.6.1.4.1.18.3.5.9.7.7.1 | RowwfSmdsSwGAEntry | not-accessible | mandatory | A Group Address and an address in that group and whether that association is valid or invalid. |
| 1.3.6.1.4.1.18.3.5.9.7.7.1.1 | ColumnwfSmdsSwGADelete | read-write | mandatory | Indication to delete this group address entry. |
| 1.3.6.1.4.1.18.3.5.9.7.7.1.2 | ColumnwfSmdsSwGASSI | read-only | mandatory | The SSI associated with this Group Address. An SSI of 0 is used to indicate that all interfaces can use the group address. An SSI other than 0 indicates that o… |
| 1.3.6.1.4.1.18.3.5.9.7.7.1.3 | ColumnwfSmdsSwGAGroupAddress | read-only | mandatory | A Group Address. |
| 1.3.6.1.4.1.18.3.5.9.7.7.1.4 | ColumnwfSmdsSwGAGroupMember | read-only | mandatory | An individual SMDS address that belongs to this Group Address. |
| 1.3.6.1.4.1.18.3.5.9.7.8 | TablewfSmdsSwCurUsageTable | not-accessible | mandatory | This table contains the Current Usage Data. This is the interface between Billing and Switching. The Switch gates create these records. The Billing gates colle… |
| 1.3.6.1.4.1.18.3.5.9.7.8.1 | RowwfSmdsSwCurUsageEntry | not-accessible | mandatory | The usage data for the current usage period indexed by destination,source address. |
| 1.3.6.1.4.1.18.3.5.9.7.8.1.1 | ColumnwfSmdsSwCurUsageDelete | read-write | obsolete | Indication to delete this current usage entry. |
| 1.3.6.1.4.1.18.3.5.9.7.8.1.2 | ColumnwfSmdsSwCurUsageSni | read-only | mandatory | The SNI number of the interface generating the usage information |
| 1.3.6.1.4.1.18.3.5.9.7.8.1.3 | ColumnwfSmdsSwCurUsageDestAddr | read-only | mandatory | The destination address of a SMDS group or individual E.164 address. |
| 1.3.6.1.4.1.18.3.5.9.7.8.1.4 | ColumnwfSmdsSwCurUsageSrcAddr | read-only | mandatory | The source address of a SMDS individual E.164 address. |
| 1.3.6.1.4.1.18.3.5.9.7.8.1.5 | ColumnwfSmdsSwCurUsageGrpIndAddr | read-only | mandatory | When the destination address of an L3_PDU is a group address, this attribute is set to one of the E.164 individual addresses that is in the group address and o… |
| 1.3.6.1.4.1.18.3.5.9.7.8.1.6 | ColumnwfSmdsSwCurUsageNumL3Pdu | read-only | mandatory | This number represents the number of billable L3_PDUs counted by the circuit during the most recent collection interval. |
| 1.3.6.1.4.1.18.3.5.9.7.8.1.7 | ColumnwfSmdsSwCurUsageNumOctet | read-only | mandatory | This number represents the number of billable octets counted by the circuit during the most recent collection interval. |
| 1.3.6.1.4.1.18.3.5.9.7.8.1.8 | ColumnwfSmdsSwCurUsageToBeDeleted | read-only | mandatory | Indication to billing to delete this current usage entry. |
| 1.3.6.1.4.1.18.3.5.9.7.9 | NodewfSmdsSwUsage | |||
| 1.3.6.1.4.1.18.3.5.9.7.9.1 | ScalarwfSmdsSwUsageEnable | read-write | mandatory | Enable/Disable SMDS_SW billing. |
| 1.3.6.1.4.1.18.3.5.9.7.9.2 | ScalarwfSmdsSwUsageVolume | read-write | mandatory | Indicates the file system volume number to which the billing usage data files will be written. The volume number corresponds to the slot number on which the vo… |
| 1.3.6.1.4.1.18.3.5.9.7.9.3 | ScalarwfSmdsSwUsageVolumeBackup | read-write | mandatory | Indicates the backup volume if wfSmdsSwUsageVolume becomes inoperative. Note: This feature is not implemented in this release. |
| 1.3.6.1.4.1.18.3.5.9.7.9.4 | ScalarwfSmdsSwUsageDirectory | read-write | mandatory | The name of the directory where the billing usage data files are stored. |
| 1.3.6.1.4.1.18.3.5.9.7.9.5 | ScalarwfSmdsSwUsageFilePrefix | read-write | mandatory | The base name of billing usage data files. |
| 1.3.6.1.4.1.18.3.5.9.7.9.6 | ScalarwfSmdsSwUsageTimerInterval | read-write | mandatory | This number determines the timer interval (number of seconds) unit for the Billing process to perform its various timer driven tasks. i.e. updating billing usa… |
| 1.3.6.1.4.1.18.3.5.9.7.9.7 | ScalarwfSmdsSwUsageUpdateInterval | read-write | mandatory | This number specifies the interval (number of minutes) for the Billing process to collect and update billing usage data in the wfSmdsSwUsage MIB. Note: When co… |
| 1.3.6.1.4.1.18.3.5.9.7.9.8 | ScalarwfSmdsSwUsageStoreInterval | read-write | mandatory | This number specifies the interval (number of minutes) for the Billing process to write billing usage data on to the file system from the wfSmdsSwUsage MIB. No… |
| 1.3.6.1.4.1.18.3.5.9.7.9.9 | ScalarwfSmdsSwUsageFlushInterval | read-write | mandatory | This number specifies the interval (number of minutes) for the Billing process to write billing usage data on to the file system from the wfSmdsSwUsage MIB fol… |
| 1.3.6.1.4.1.18.3.5.9.7.9.10 | ScalarwfSmdsSwUsageCleanupInterval | read-write | mandatory | This is the interval (number of minutes) for the Billing process to check and delete old billing usage data files. Note: When converted to seconds, this must b… |
| 1.3.6.1.4.1.18.3.5.9.7.9.11 | ScalarwfSmdsSwUsageLocalTimeZone | read-only | mandatory | Indicates local time zone of the switch |
| 1.3.6.1.4.1.18.3.5.9.7.9.12 | ScalarwfSmdsSwUsageUpdateTimeStamp | read-only | mandatory | Time stamp of last wfSmdsSwUsageUpdateInterval timer expiration or the starting time of the current wfSmdsSwUsageUpdateInterval. This value is number of second… |
| 1.3.6.1.4.1.18.3.5.9.7.9.13 | ScalarwfSmdsSwUsageStoreTimeStamp | read-only | mandatory | Time stamp of last wfSmdsSwUsageStoreInterval timer expiration or the starting time of the current wfSmdsSwUsageStoreInterval. This value is number of seconds … |
| 1.3.6.1.4.1.18.3.5.9.7.9.14 | ScalarwfSmdsSwUsageFlushTimeStamp | read-only | mandatory | Time stamp of last wfSmdsSwUsageFlushInterval timer expiration or the starting time of the current wfSmdsSwUsageFlushInterval. This value is number of seconds … |
| 1.3.6.1.4.1.18.3.5.9.7.9.15 | ScalarwfSmdsSwUsageCleanupTimeStamp | read-only | mandatory | Time stamp of last wfSmdsSwUsageCleanupInterval timer expiration or the starting time of the current wfSmdsSwUsageCleanupInterval. This value is number of seco… |
| 1.3.6.1.4.1.18.3.5.9.7.9.16 | ScalarwfSmdsSwUsageUpdateData | read-write | mandatory | Setting this attribute to a non-zero value will cause an immediate updating of the billing usage data. Once activated, this attribute should be reset to zero t… |
| 1.3.6.1.4.1.18.3.5.9.7.9.17 | ScalarwfSmdsSwUsageStoreData | read-write | mandatory | Setting this attribute to a non-zero value will cause an immediate updating and writing of the billing usage data. Once activated, this attribute should be res… |
| 1.3.6.1.4.1.18.3.5.9.7.9.18 | ScalarwfSmdsSwUsageFlushData | read-write | mandatory | Setting this attribute to a non-zero value will cause an immediate updating and writing of the billing usage data and followed by zeroing the wfSmdsSwBillingUs… |
| 1.3.6.1.4.1.18.3.5.9.7.9.19 | ScalarwfSmdsSwUsageFileCleanup | read-write | mandatory | Setting this attribute to a non-zero value will cause an immediate checking and deleting old billing usage data files. Once activated, this attribute should be… |
| 1.3.6.1.4.1.18.3.5.9.7.9.20 | ScalarwfSmdsSwUsageState | read-only | mandatory | current state of SMDS_SW billing. |
| 1.3.6.1.4.1.18.3.5.9.7.9.21 | ScalarwfSmdsSwUsageCurVolume | read-only | mandatory | current file system volume number used. This number is the same as wfSmdsSwUsageVolume except when the user sets wfSmdsSwUsageVolume to an invalid number. |
| 1.3.6.1.4.1.18.3.5.9.7.9.22 | ScalarwfSmdsSwUsageCurVolumeBackup | read-only | mandatory | curent backup file system volume number used. This number is the same as wfSmdsSwUsageVolumeBackUp except when the user sets wfSmdsSwUsageVolume to an invalid … |
| 1.3.6.1.4.1.18.3.5.9.7.9.23 | ScalarwfSmdsSwUsageCurDirectory | read-only | mandatory | current directory name used. This number is the same as wfSmdsSwUsageDirectory except when the user sets wfSmdsSwUsageDirectory to an invalid name. |
| 1.3.6.1.4.1.18.3.5.9.7.9.24 | ScalarwfSmdsSwUsageCurFilePrefix | read-only | mandatory | current base file name used. This number is the same as wfSmdsSwUsageFilePrefix except when the user sets wfSmdsSwUsageFilePrefix to an invalid name. |
| 1.3.6.1.4.1.18.3.5.9.7.9.25 | ScalarwfSmdsSwUsageCurTimerInterval | read-only | mandatory | current timer interval number used. This number is the same as wfSmdsSwUsageTimerInterval except when the user sets wfSmdsSwUsageTimerInterval to an invalid va… |
| 1.3.6.1.4.1.18.3.5.9.7.9.26 | ScalarwfSmdsSwUsageCurUpdateInterval | read-only | mandatory | current update interval number used. This number is the same as wfSmdsSwUsageUpdateInterval except when the user sets wfSmdsSwUsageUpdateInterval to an invalid… |
| 1.3.6.1.4.1.18.3.5.9.7.9.27 | ScalarwfSmdsSwUsageCurStoreInterval | read-only | mandatory | current store timer interval number used. This number is the same as wfSmdsSwUsageStoreInterval except when the user sets wfSmdsSwUsageStoreInterval to an inva… |
| 1.3.6.1.4.1.18.3.5.9.7.9.28 | ScalarwfSmdsSwUsageCurFlushInterval | read-only | mandatory | current flush timer interval number used. This number is the same as wfSmdsSwUsageFlushInterval except when the user sets wfSmdsSwUsageFlushInterval to an inva… |
| 1.3.6.1.4.1.18.3.5.9.7.9.29 | ScalarwfSmdsSwUsageCurCleanupInterval | read-only | mandatory | current file cleanup timer interval number used. This number is the same as wfSmdsSwUsageCleanupInterval except when the user sets wfSmdsSwUsageCleanupInterval… |
| 1.3.6.1.4.1.18.3.5.9.7.9.30 | ScalarwfSmdsSwUsageDebug | read-write | mandatory | Enable/Disable printing of debug edl (trap) messages. NOTE: Do not enable this attribute in operational enviornment as it will likely flood the logging facilit… |
| 1.3.6.1.4.1.18.3.5.9.7.9.31 | ScalarwfSmdsSwUsageCurDebug | read-only | mandatory | current debug value used. This value is the same as wfSmdsSwUsageDebug except when the user sets wfSmdsSwUsageDeubg to an invalid value. |
| 1.3.6.1.4.1.18.3.5.9.7.9.32 | ScalarwfSmdsSwUsageSwitchId | read-only | mandatory | switch id used in the billing usage data file. |
| 1.3.6.1.4.1.18.3.5.9.7.9.33 | ScalarwfSmdsSwUsageNumEntries | read-only | mandatory | number of entries in wfSmdsSwUsageTable |
| 1.3.6.1.4.1.18.3.5.9.7.10 | TablewfSmdsSwUsageTable | not-accessible | mandatory | The Billing Usage Table. |
| 1.3.6.1.4.1.18.3.5.9.7.10.1 | RowwfSmdsSwUsageEntry | not-accessible | mandatory | The parameters for Billing Usage. |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.1 | ColumnwfSmdsSwUsageDelete | read-only | mandatory | Indicates status of this entry. SMDS_SW_USAGE_CREATED is the normal case. SMDS_SW_USAGE_DELETED means this billing instance will be deleted at the end of the n… |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.2 | ColumnwfSmdsSwUsageSni | read-only | mandatory | The circuit number of the interface generating the usage information |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.3 | ColumnwfSmdsSwUsageDestAddr | read-only | mandatory | Instance identifier; the destination address of an L3_PDU. The SMDS Switch collects usage data based on the destination/source address pair. |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.4 | ColumnwfSmdsSwUsageSrcAddr | read-only | mandatory | Instance identifier; the source address of an L3_PDU. The SMDS Switch collects usage data based on the destination/source address pair. |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.5 | ColumnwfSmdsSwUsageStartTimeStampHigh | read-only | mandatory | Time stamp of the starting time (the high 32 bits) of last billing usage interval. This value is the number of 1/100th seconds since midnight Jan 1, 1976 (GMT). |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.6 | ColumnwfSmdsSwUsageStartTimeStampLow | read-only | mandatory | Time stamp of the starting time (the low 32 bits) of last billing usage interval. This value is the number of 1/100th seconds since midnight Jan 1, 1976 (GMT). |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.7 | ColumnwfSmdsSwUsageEndTimeStampHigh | read-only | mandatory | Time stamp of the ending time (the high 32 bits) of last billing usage interval. This value is the number of 1/100th seconds since midnight Jan 1, 1976 (GMT). |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.8 | ColumnwfSmdsSwUsageEndTimeStampLow | read-only | mandatory | Time stamp of the ending time (the low 32 bits) of last billing usage interval. This value is the number of 1/100th seconds since midnight Jan 1, 1976 (GMT). |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.9 | ColumnwfSmdsSwUsageSentL3PduHigh | read-only | mandatory | Number (the high 32 bits) of L3_PDUs sent to the CPE between wfSmdsSwUsageStartTimeStamp and wfSmdsSwUsageEndTimeStamp. |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.10 | ColumnwfSmdsSwUsageSentL3PduLow | read-only | mandatory | Number (the low 32 bits) of L3_PDUs sent to the CPE between wfSmdsSwUsageStartTimeStamp and wfSmdsSwUsageEndTimeStamp. |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.11 | ColumnwfSmdsSwUsageSentOctetHigh | read-only | mandatory | Number (the high 32 bits) of octets sent to the CPE between wfSmdsSwUsageStartTimeStamp and wfSmdsSwUsageEndTimeStamp. |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.12 | ColumnwfSmdsSwUsageSentOctetLow | read-only | mandatory | Number (the low 32 bits) of octets sent to the CPE between wfSmdsSwUsageStartTimeStamp and wfSmdsSwUsageEndTimeStamp. |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.13 | ColumnwfSmdsSwUsageLastL3PduHigh | read-only | mandatory | The (high 32 bits) value of wfSmdsSwCurUsageNumL3Pdu value at wfSmdsSwUsageEndTimeStamp. Note: Since wfSmdsSwCurUsageNumL3Pdu is a 32-bit COUNTER, this is real… |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.14 | ColumnwfSmdsSwUsageLastL3PduLow | read-only | mandatory | The (low 32 bits) value of wfSmdsSwCurUsageNumL3Pdu value at wfSmdsSwUsageEndTimeStamp. |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.15 | ColumnwfSmdsSwUsageLastOctetHigh | read-only | mandatory | The (high 32 bits) value of wfSmdsSwCurUsageNumOctets value at wfSmdsSwUsageEndTimeStamp. Note: Since wfSmdsSwCurUsageNumOctets is a 32-bit COUNTER, this is re… |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.16 | ColumnwfSmdsSwUsageLastOctetLow | read-only | mandatory | The (low 32 bits) value of wfSmdsSwCurUsageNumOctets value at wfSmdsSwUsageEndTimeStamp. |
| 1.3.6.1.4.1.18.3.5.9.7.10.1.17 | ColumnwfSmdsSwUsageGrpIndAddr | read-only | mandatory | When the destination address of an L3_PDU is a group address, this attribute is set to one of the E.164 individual addresses that is in the group address and o… |
| 1.3.6.1.4.1.18.3.5.9.7.11 | TablewfSmdsSwSsiSniTable | not-accessible | mandatory | The Parameters for the SSI/SNI Object. This object associates SNI's with SSI's for Bellcore TR-TSV-001239 compliance. |
| 1.3.6.1.4.1.18.3.5.9.7.11.1 | RowwfSmdsSwSsiSniEntry | not-accessible | mandatory | The parameters for a particular SSI/SNI. |
| 1.3.6.1.4.1.18.3.5.9.7.11.1.1 | ColumnwfSmdsSwSsiSniDelete | read-write | mandatory | Indication to delete this SSI/SNI entry. |
| 1.3.6.1.4.1.18.3.5.9.7.11.1.2 | ColumnwfSmdsSwSsiSniSSI | read-only | mandatory | An SSI. |
| 1.3.6.1.4.1.18.3.5.9.7.11.1.3 | ColumnwfSmdsSwSsiSniSNI | read-only | mandatory | An SNI. |