Wellfleet-SYS-SVC-MIB
40 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.3.2.10.1 | NodewfNetbootCfgGroup | |||
| 1.3.6.1.4.1.18.3.3.2.10.1.1 | ScalarwfNetbootImage | read-write | mandatory | Enables booting of an executable image over the network. If disabled, then the image will be read from a local file system. |
| 1.3.6.1.4.1.18.3.3.2.10.1.2 | ScalarwfNetbootConfig | read-write | mandatory | Enables booting of a configuration file over the network. If disabled, then the config will be read from a local file system. |
| 1.3.6.1.4.1.18.3.3.2.10.1.3 | ScalarwfNetbootServerAddress | read-write | mandatory | IP address of remote server. |
| 1.3.6.1.4.1.18.3.3.2.10.1.4 | ScalarwfNetbootImageName | read-write | mandatory | Pathname of image file on remote server. |
| 1.3.6.1.4.1.18.3.3.2.10.1.5 | ScalarwfNetbootConfigName | read-write | mandatory | Pathname of configuration file on remote server. |
| 1.3.6.1.4.1.18.3.3.2.10.1.6 | ScalarwfNetbootCfgDelete | read-write | mandatory | create/delete parameter, dflt = created |
| 1.3.6.1.4.1.18.3.3.2.10.2 | NodewfNetbootCurrGroup | |||
| 1.3.6.1.4.1.18.3.3.2.10.2.1 | ScalarwfNetbootImageCurr | read-only | mandatory | Current value of Netboot image flag in Non-Volatile RAM. |
| 1.3.6.1.4.1.18.3.3.2.10.2.2 | ScalarwfNetbootConfigCurr | read-only | mandatory | Current value of Netboot config flag in Non-Volatile RAM. |
| 1.3.6.1.4.1.18.3.3.2.10.2.3 | ScalarwfNetbootServerAddressCurr | read-only | mandatory | IP address of remote server. |
| 1.3.6.1.4.1.18.3.3.2.10.2.4 | ScalarwfNetbootImageNameCurr | read-only | mandatory | Pathname of image file on remote server. |
| 1.3.6.1.4.1.18.3.3.2.10.2.5 | ScalarwfNetbootConfigNameCurr | read-only | mandatory | Pathname of configuration file on remote server. |
| 1.3.6.1.4.1.18.3.3.2.10.3 | TablewfNetbootCfgTable | not-accessible | mandatory | A Table of Interface-specific Netboot Configuration Parameters |
| 1.3.6.1.4.1.18.3.3.2.10.3.1 | RowwfNetbootCfgEntry | not-accessible | mandatory | Values of a particular interface's configuration parameters. |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.1 | ColumnwfNetbootDelete | read-write | mandatory | create/delete parameter, dflt = created Deleteing this instance will set the corresponding NOVRAM values to the default settings. |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.2 | ColumnwfNetbootSlot | read-only | mandatory | instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.3 | ColumnwfNetbootConnector | read-only | mandatory | Unique number which identifies the interface for which the following parameters are configured. |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.4 | ColumnwfNetbootIpAddr | read-write | mandatory | IP address to use on this interface |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.5 | ColumnwfNetbootIpMask | read-write | mandatory | IP address mask to use on this interface |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.6 | ColumnwfNetbootNextHop | read-write | mandatory | IP address of the next hop router connected to this interface. This value is used to auto-configure a static route for Network Boot. |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.7 | ColumnwfNetbootProtoMask | read-write | mandatory | Bit Mask indicating a non-default protocol is being used on this interface. |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.8 | ColumnwfNetbootDisable | read-write | mandatory | Enable or disable the interface for Netbooting. |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.9 | ColumnwfNetbootConnName | read-only | mandatory | Connector name. |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.10 | ColumnwfNetbootTokenRingSpeed | read-write | mandatory | Speed of the Token Ring interface for Netbooting. |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.11 | ColumnwfNetbootBchanRate | read-write | mandatory | Speed B Channel for Netbooting. AN 200 Only |
| 1.3.6.1.4.1.18.3.3.2.10.3.1.12 | ColumnwfNetbootDsuCsuOpMode | read-write | mandatory | Dsu/Csu interface speed for Netbooting |
| 1.3.6.1.4.1.18.3.3.2.10.4 | TablewfNetbootCurrTable | not-accessible | mandatory | A Table of current values for Interface-specific Netboot Parameters |
| 1.3.6.1.4.1.18.3.3.2.10.4.1 | RowwfNetbootCurrEntry | not-accessible | mandatory | Values of a particular interface's current configuration parameters. |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.1 | ColumnwfNetbootCurrSlot | read-only | mandatory | instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.2 | ColumnwfNetbootCurrConnector | read-only | mandatory | Unique number which identifies the interface for which the following parameters are configured. |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.3 | ColumnwfNetbootCurrIpAddr | read-only | mandatory | IP address to use on this interface |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.4 | ColumnwfNetbootCurrIpMask | read-only | mandatory | IP address mask to use on this interface |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.5 | ColumnwfNetbootCurrNextHop | read-only | mandatory | IP address of the next hop router connected to this interface. This value is used to auto-configure a static route for Network Boot. |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.6 | ColumnwfNetbootCurrProtoMask | read-only | mandatory | Bit Mask indicating a non-default protocol is being used on this interface. |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.7 | ColumnwfNetbootCurrDisable | read-only | mandatory | Enable or disable the interface for Netbooting. |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.8 | ColumnwfNetbootCurrConnName | read-only | mandatory | Connector name. |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.9 | ColumnwfNetbootCurrTokenRingSpeed | read-only | mandatory | Speed of the Token Ring interface for Netbooting. |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.10 | ColumnwfNetbootCurrBchanRate | read-write | mandatory | Speed B Channel for Netbooting. AN 200 Only |
| 1.3.6.1.4.1.18.3.3.2.10.4.1.11 | ColumnwfNetbootCurrDsuCsuOpMode | read-write | mandatory | Dsu/Csu interface speed for Netbooting |