Wellfleet-Series7-MIB

1998 objects

No module-level DESCRIPTION found.

Imported Objects

RFC-1212	OBJECT-TYPE
RFC1155-SMI	Counter enterprises Gauge IpAddress Opaque TimeTicks
RFC1213-MIB	DisplayString

OID	Name	Access	Status	Description
1.3.6.1.4.1.18	Nodewellfleet
1.3.6.1.4.1.18.3	NodewfSwSeries7
1.3.6.1.4.1.18.3.1	NodewfHardwareConfig
1.3.6.1.4.1.18.3.1.1	NodewfHwBase
1.3.6.1.4.1.18.3.1.1.1	ScalarwfHwBpIdOpt	read-only	mandatory	The BackPlane identification number.
1.3.6.1.4.1.18.3.1.1.2	ScalarwfHwBpRev	read-only	mandatory	The revision level of the BackPlane. High byte is in upper 2 bytes.
1.3.6.1.4.1.18.3.1.1.3	ScalarwfHwBpSerialNumber	read-only	mandatory	The serial number of the BackPlane.
1.3.6.1.4.1.18.3.1.1.4	ScalarwfBCNPwrSupply1	read-only	mandatory	Status of BCN Hot-Swappable Power Supply 1
1.3.6.1.4.1.18.3.1.1.5	ScalarwfBCNPwrSupply2	read-only	mandatory	Status of BCN Hot-Swappable Power Supply 2
1.3.6.1.4.1.18.3.1.1.6	ScalarwfBCNPwrSupply3	read-only	mandatory	Status of BCN Hot-Swappable Power Supply 3
1.3.6.1.4.1.18.3.1.1.7	ScalarwfBCNPwrSupply4	read-only	mandatory	Status of BCN Hot-Swappable Power Supply 4
1.3.6.1.4.1.18.3.1.1.8	ScalarwfBCNFanStatus	read-only	mandatory	Status of BCN Fan Tray
1.3.6.1.4.1.18.3.1.1.9	ScalarwfBCNTemperature	read-only	mandatory	Status of BCN Fan Tray
1.3.6.1.4.1.18.3.1.2	TablewfHwTable	not-accessible	mandatory	Hardware Table - indexed by slot number
1.3.6.1.4.1.18.3.1.2.1	RowwfHwEntry	not-accessible	mandatory	Hardware specific information about a slot.
1.3.6.1.4.1.18.3.1.2.1.1	ColumnwfHwSlot	read-only	mandatory	A unique value for each slot. Its value ranges between 1 and 14. There are products in this family that contain 1, 5, and 14 slots.
1.3.6.1.4.1.18.3.1.2.1.2	ColumnwfHwModIdOpt	read-only	mandatory	The module identification number. Port Configurations HWStat Name Enet Sync Async Token Framer Fiber 1 ENET-1 2 0 0 0 0 0 8 ENET-2 2 0 0 0 0 0 16 SYNC-1 0 4 1 …
1.3.6.1.4.1.18.3.1.2.1.3	ColumnwfHwModRev	read-only	mandatory	The revision level of the module. High byte is in upper 2 bytes.
1.3.6.1.4.1.18.3.1.2.1.4	ColumnwfHwModSerialNumber	read-only	mandatory	The serial number of the module.
1.3.6.1.4.1.18.3.1.2.1.5	ColumnwfHwMotherBdIdOpt	read-only	mandatory	The mother board identification number.
1.3.6.1.4.1.18.3.1.2.1.6	ColumnwfHwMotherBdRev	read-only	mandatory	The revision level of the mother board. High byte is in upper 2 bytes.
1.3.6.1.4.1.18.3.1.2.1.7	ColumnwfHwMotherBdSerialNumber	read-only	mandatory	The serial number of the mother board.
1.3.6.1.4.1.18.3.1.2.1.8	ColumnwfHwDaughterBdIdOpt	read-only	mandatory	The daughter board identification number.
1.3.6.1.4.1.18.3.1.2.1.9	ColumnwfHwDaughterBdRev	read-only	mandatory	The revision level of the daughter board. High byte is in upper 2 bytes.
1.3.6.1.4.1.18.3.1.2.1.10	ColumnwfHwDaughterBdSerialNumber	read-only	mandatory	The serial number of the daughter board.
1.3.6.1.4.1.18.3.1.2.1.11	ColumnwfHwBabyBdIdOpt	read-only	mandatory	The baby board identification number.
1.3.6.1.4.1.18.3.1.2.1.12	ColumnwfHwBabyBdRev	read-only	mandatory	The revision level of the baby board. High byte is in upper 2 bytes.
1.3.6.1.4.1.18.3.1.2.1.13	ColumnwfHwBabyBdSerialNumber	read-only	mandatory	The serial number of the baby board.
1.3.6.1.4.1.18.3.1.2.1.14	ColumnwfHwDiagPromRev	read-only	mandatory	The revision level of the Diagnostic PROM. Major revision level is in the upper 2 bytes, minor revision level in the lower 2 bytes.
1.3.6.1.4.1.18.3.1.2.1.15	ColumnwfHwDiagPromDate	read-only	mandatory	The creation date of the Diagnostic PROM
1.3.6.1.4.1.18.3.1.2.1.16	ColumnwfHwDiagPromSource	read-only	mandatory	The origin of the Diagnostic PROM contents
1.3.6.1.4.1.18.3.1.2.1.17	ColumnwfHwBootPromRev	read-only	mandatory	The revision level of the BOOT PROM. Major revision level is in the upper 2 bytes, minor revision level in the lower 2 bytes.
1.3.6.1.4.1.18.3.1.2.1.18	ColumnwfHwBootPromDate	read-only	mandatory	The creation date of the Boot PROM
1.3.6.1.4.1.18.3.1.2.1.19	ColumnwfHwBootPromSource	read-only	mandatory	The origin of the Boot PROM contents
1.3.6.1.4.1.18.3.1.2.1.20	ColumnwfHwSparePromRev	read-only	mandatory	The revision level of the BOOT PROM. Major revision level is in the upper 2 bytes, minor revision level in the lower 2 bytes.
1.3.6.1.4.1.18.3.1.2.1.21	ColumnwfHwSparePromDate	read-only	mandatory	The creation date of the Spare PROM
1.3.6.1.4.1.18.3.1.2.1.22	ColumnwfHwSparePromSource	read-only	mandatory	The origin of the Spare PROM contents
1.3.6.1.4.1.18.3.1.2.1.23	ColumnwfHwFileSysPresent	read-only	mandatory	Flag indicating presence of File System on this slot.
1.3.6.1.4.1.18.3.1.3	NodewfMod
1.3.6.1.4.1.18.3.1.3.1	ScalarwfModState	not-accessible	mandatory	State of this record
1.3.6.1.4.1.18.3.1.3.2	ScalarwfModSlot	not-accessible	mandatory	Instance of this record
1.3.6.1.4.1.18.3.1.3.3	ScalarwfModIdOpt	not-accessible	mandatory	actual module ID and Option
1.3.6.1.4.1.18.3.1.3.4	ScalarwfModRev	not-accessible	mandatory	actual module Revision
1.3.6.1.4.1.18.3.1.3.5	ScalarwfModProm	not-accessible	mandatory	module PROM
1.3.6.1.4.1.18.3.1.3.6	ScalarwfModMidr	not-accessible	mandatory	module ID register
1.3.6.1.4.1.18.3.1.3.7	ScalarwfModMled	not-accessible	mandatory	module LED register
1.3.6.1.4.1.18.3.1.3.8	ScalarwfModMisr	not-accessible	mandatory	module MISR register
1.3.6.1.4.1.18.3.1.3.9	ScalarwfModSnprom	not-accessible	mandatory	module SNPROM
1.3.6.1.4.1.18.3.1.3.10	ScalarwfModMadr1	not-accessible	mandatory	SNPROM MAC address connector 1
1.3.6.1.4.1.18.3.1.3.11	ScalarwfModMadr2	not-accessible	mandatory	SNPROM MAC address connector 2
1.3.6.1.4.1.18.3.1.3.12	ScalarwfModMadr3	not-accessible	mandatory	SNPROM MAC address connector 3
1.3.6.1.4.1.18.3.1.3.13	ScalarwfModMadr4	not-accessible	mandatory	SNPROM MAC address connector 4
1.3.6.1.4.1.18.3.1.3.14	ScalarwfModLance1	not-accessible	mandatory	LANCE line 1
1.3.6.1.4.1.18.3.1.3.15	ScalarwfModLance2	not-accessible	mandatory	LANCE line 2
1.3.6.1.4.1.18.3.1.3.16	ScalarwfModMk50251	not-accessible	mandatory	MK5025 line 1
1.3.6.1.4.1.18.3.1.3.17	ScalarwfModMk50252	not-accessible	mandatory	MK5025 line 2
1.3.6.1.4.1.18.3.1.3.18	ScalarwfModMk50253	not-accessible	mandatory	MK5025 line 3
1.3.6.1.4.1.18.3.1.3.19	ScalarwfModMk50254	not-accessible	mandatory	MK5025 line 4
1.3.6.1.4.1.18.3.1.3.20	ScalarwfModSicr	not-accessible	mandatory	SYNC interface control register
1.3.6.1.4.1.18.3.1.3.21	ScalarwfModSbrr	not-accessible	mandatory	SYNC baudrate register
1.3.6.1.4.1.18.3.1.3.22	ScalarwfMod8530	not-accessible	mandatory	8530 DUART
1.3.6.1.4.1.18.3.1.3.23	ScalarwfModCar	not-accessible	mandatory	CAM assembly register
1.3.6.1.4.1.18.3.1.3.24	ScalarwfModDefaA	not-accessible	mandatory	DEFA A chip
1.3.6.1.4.1.18.3.1.3.25	ScalarwfModCamALock	not-accessible	mandatory	CAM A lock
1.3.6.1.4.1.18.3.1.3.26	ScalarwfModCamAUnlock	not-accessible	mandatory	CAM A unlock
1.3.6.1.4.1.18.3.1.3.27	ScalarwfModDefaB	not-accessible	mandatory	DEFA B chip
1.3.6.1.4.1.18.3.1.3.28	ScalarwfModCamBLock	not-accessible	mandatory	CAM B lock
1.3.6.1.4.1.18.3.1.3.29	ScalarwfModCamBUnlock	not-accessible	mandatory	CAM B unlock
1.3.6.1.4.1.18.3.1.3.30	ScalarwfModIlacc1	not-accessible	mandatory	ILACC line 1
1.3.6.1.4.1.18.3.1.3.31	ScalarwfModIlacc2	not-accessible	mandatory	ILACC line 2
1.3.6.1.4.1.18.3.1.3.32	ScalarwfModIlacc3	not-accessible	mandatory	ILACC line 3
1.3.6.1.4.1.18.3.1.3.33	ScalarwfModIlacc4	not-accessible	mandatory	ILACC line 4
1.3.6.1.4.1.18.3.1.3.34	ScalarwfModTms3801	not-accessible	mandatory	TOKEN ring chip line 1
1.3.6.1.4.1.18.3.1.3.35	ScalarwfModTms3802	not-accessible	mandatory	TOKEN ring chip line 2
1.3.6.1.4.1.18.3.1.3.36	ScalarwfModTocr	not-accessible	mandatory	TOKEN control register
1.3.6.1.4.1.18.3.1.3.37	ScalarwfModTsra	not-accessible	mandatory	TOKEN source route accelerator
1.3.6.1.4.1.18.3.1.3.38	ScalarwfModMuxram1	not-accessible	mandatory	T1 mux RAM active
1.3.6.1.4.1.18.3.1.3.39	ScalarwfModMuxram2	not-accessible	mandatory	T1 mux RAM inactive
1.3.6.1.4.1.18.3.1.3.40	ScalarwfModTicr	not-accessible	mandatory	T1 interface control register
1.3.6.1.4.1.18.3.1.3.41	ScalarwfModFramer1	not-accessible	mandatory	T1 framer line 1
1.3.6.1.4.1.18.3.1.3.42	ScalarwfModFramer2	not-accessible	mandatory	T1 framer line 2
1.3.6.1.4.1.18.3.1.3.43	ScalarwfModFsi1	not-accessible	mandatory	FDDI FSI line 1
1.3.6.1.4.1.18.3.1.3.44	ScalarwfModMac1	not-accessible	mandatory	FDDI MAC line 1
1.3.6.1.4.1.18.3.1.3.45	ScalarwfModElmA1	not-accessible	mandatory	FDDI ELM A line 1
1.3.6.1.4.1.18.3.1.3.46	ScalarwfModElmB1	not-accessible	mandatory	FDDI ELM B line 1
1.3.6.1.4.1.18.3.1.3.47	ScalarwfModMcr1	not-accessible	mandatory	FDDI Module control register line 1
1.3.6.1.4.1.18.3.1.3.48	ScalarwfModHssiFsi1	not-accessible	mandatory	HSSI FSI line 1
1.3.6.1.4.1.18.3.1.3.49	ScalarwfModHssiFsi2	not-accessible	mandatory	HSSI FSI line 2
1.3.6.1.4.1.18.3.1.3.50	ScalarwfModHssiUga1	not-accessible	mandatory	HSSI UGA-330-2 line 1
1.3.6.1.4.1.18.3.1.3.51	ScalarwfModHssiUga2	not-accessible	mandatory	HSSI UGA-330-2 line 2
1.3.6.1.4.1.18.3.1.3.52	ScalarwfModHicr	not-accessible	mandatory	HSSI Control Register address
1.3.6.1.4.1.18.3.1.3.53	ScalarwfModHicrData	not-accessible	mandatory	HSSI Last value written to the HICR
1.3.6.1.4.1.18.3.1.3.54	ScalarwfModHlsr	not-accessible	mandatory	HSSI Line Status Register address
1.3.6.1.4.1.18.3.1.3.55	ScalarwfModHlsrData	not-accessible	mandatory	HSSI Last value read from HLSR
1.3.6.1.4.1.18.3.2	NodewfSoftwareConfig
1.3.6.1.4.1.18.3.2.1	NodewfProtocols
1.3.6.1.4.1.18.3.2.1.1	ScalarwfIPROTOLoad	read-write	mandatory	Bit mask for loading the IP routing suite (RIP, EGP, OSPF) on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so …
1.3.6.1.4.1.18.3.2.1.2	ScalarwfDECNETLoad	read-write	mandatory	Bit mask for loading the DECNet router on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.1.3	ScalarwfATLoad	read-write	mandatory	Bit mask for loading the AppleTalk router on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.1.4	ScalarwfXNSLoad	read-write	mandatory	Bit mask for loading the XNS router on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.1.5	ScalarwfIPXLoad	read-write	mandatory	Bit mask for loading the IPX router on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.1.6	ScalarwfOSILoad	read-write	mandatory	Bit mask for loading the ISO router on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.1.7	ScalarwfX25DTELoad	read-write	mandatory	Bit mask for loading the X.25 DTE protocol on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.1.8	ScalarwfX25DCELoad	read-write	mandatory	Bit mask for loading the X.25 DCE protocol on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.1.9	ScalarwfVINESLoad	read-write	mandatory	Bit mask for loading the VINES router on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.2	NodewfLinkModules
1.3.6.1.4.1.18.3.2.2.1	ScalarwfENETIILoad	read-write	mandatory	Bit mask for loading the Ethernet II driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.2.2	ScalarwfQENETLoad	read-write	mandatory	Bit mask for loading the Quad Ethernet driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.2.3	ScalarwfFDDILoad	read-write	mandatory	Bit mask for loading the FDDI driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.2.4	ScalarwfDSDELoad	read-write	mandatory	Bit mask for loading the Dual Sync - Dual Enet driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.2.5	ScalarwfDSDEIILoad	read-write	mandatory	Bit mask for loading the Dual Sync - Dual Enet II driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so fo…
1.3.6.1.4.1.18.3.2.2.6	ScalarwfQSYNCLoad	read-write	mandatory	Bit mask for loading the Quad Sync driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.2.7	ScalarwfDTLoad	read-write	mandatory	Bit mask for loading the Dual Token driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.2.8	ScalarwfDSTLoad	read-write	mandatory	Bit mask for loading the DST driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.2.9	ScalarwfT1IILoad	read-write	mandatory	Bit mask for loading the T1 II driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.2.10	ScalarwfE1IILoad	read-write	mandatory	Bit mask for loading the E1 II driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.2.11	ScalarwfHSSILoad	read-write	mandatory	Bit mask for loading the HSSI driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.2.12	ScalarwfFNSDSELoad	read-write	mandatory	Bit mask for loading the FNSDSE driver on slot 2 (FNES Only). The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.2.13	ScalarwfFNSDSDTLoad	read-write	mandatory	Bit mask for loading the FNSDSDT driver on slot 2 (FNTS Only). The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.3	NodewfDrivers
1.3.6.1.4.1.18.3.2.3.1	ScalarwfLANCELoad	read-write	mandatory	Bit mask for loading the LANCE chip driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.3.2	ScalarwfILACCLoad	read-write	mandatory	Bit mask for loading the ILACC chip driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.3.3	ScalarwfFSILoad	read-write	mandatory	Bit mask for loading the FDDI System Interface (FSI) chip driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 an…
1.3.6.1.4.1.18.3.2.3.4	ScalarwfTMS380Load	read-write	mandatory	Bit mask for loading the TMS380 chip driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.3.5	ScalarwfMK5025Load	read-write	mandatory	Bit mask for loading the MK5025 chip driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.3.6	ScalarwfDS2180Load	read-write	mandatory	Bit mask for loading the DS2180 chip driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.3.7	ScalarwfDS2181Load	read-write	mandatory	Bit mask for loading the DS2181 chip driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth.
1.3.6.1.4.1.18.3.2.3.8	ScalarwfDEFALoad	read-write	mandatory	Bit mask for loading the AM99C10 chip driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2 and so forth. The AM99…
1.3.6.1.4.1.18.3.2.3.9	ScalarwfAMZ8530Load	read-write	mandatory	Bit mask for loading the AMZ8530 chip driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.2.3.10	ScalarwfHSSIFSILoad	read-write	mandatory	Bit mask for loading the HSSI FSI chip driver on slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
1.3.6.1.4.1.18.3.3	NodewfSystem
1.3.6.1.4.1.18.3.3.1	NodewfSys
1.3.6.1.4.1.18.3.3.1.1	ScalarwfSysDescr	read-only	mandatory	A textual description of the entity including full name and version of the system's hardware type, OS, and networking SW
1.3.6.1.4.1.18.3.3.1.2	ScalarwfSysObjectID	read-only	mandatory	Provides an unambiguous means for determining the MIB type (old product vs. harpoon MIB).
1.3.6.1.4.1.18.3.3.1.3	ScalarwfSysUpTime	read-only	mandatory	Time in seconds/100 since the last cold start
1.3.6.1.4.1.18.3.3.1.4	ScalarwfSysContact	read-write	mandatory	Contact person for this node and where/how to contact them
1.3.6.1.4.1.18.3.3.1.5	ScalarwfSysName	read-write	mandatory	Node's fully qualified domain name or administratively assigned name
1.3.6.1.4.1.18.3.3.1.6	ScalarwfSysLocation	read-write	mandatory	Physical Location of this Node
1.3.6.1.4.1.18.3.3.1.7	ScalarwfSysServices	read-only	mandatory	A sum of numbers indicating the set of services the entity offers. For each layer L, add 2**(L - 1). Example: 78 = Layers 2,3,4, and 7.
1.3.6.1.4.1.18.3.3.1.8	ScalarwfSysGmtOffset	read-only	mandatory	The positive or negative offset from Greenwich Mean Time (GMT). This effectively describes the time zone.
1.3.6.1.4.1.18.3.3.1.9	ScalarwfSysMibVersion	read-only	mandatory	The version of the private management information base currently being used by the system software. Format is: xV.RR
1.3.6.1.4.1.18.3.3.2	NodewfServices
1.3.6.1.4.1.18.3.3.2.1	NodewfConsole
1.3.6.1.4.1.18.3.3.2.1.1	ScalarwfBaudRate	read-write	mandatory	Baud rate configured on the Technician Interface console
1.3.6.1.4.1.18.3.3.2.1.2	ScalarwfDataBits	read-write	mandatory	Number of data bits configured on the Technician Interface console
1.3.6.1.4.1.18.3.3.2.1.3	ScalarwfParity	read-write	mandatory	Type of parity configured on the Technician Interface console
1.3.6.1.4.1.18.3.3.2.1.4	ScalarwfStopBits	read-write	mandatory	Number of stop bits configured on the Technician Interface console
1.3.6.1.4.1.18.3.3.2.1.5	ScalarwfModemEnable	read-write	mandatory	Enable the Technician Interface console to run over a modem
1.3.6.1.4.1.18.3.3.2.1.6	ScalarwfLinesPerScreen	read-write	mandatory	Number of lines which can be displayed in one screen on the Technician Interface console
1.3.6.1.4.1.18.3.3.2.1.7	ScalarwfMoreEnable	read-write	mandatory	Enable the 'more' feature on the Technician Interface console
1.3.6.1.4.1.18.3.3.2.1.8	ScalarwfPrompt	read-write	mandatory	Character string which will be used as the system prompt on the Technician Interface console
1.3.6.1.4.1.18.3.3.2.1.9	ScalarwfLoginTimeOut	read-write	mandatory	IF MODEM_ENABLED then time out in minutes to HUP when at the login prompt
1.3.6.1.4.1.18.3.3.2.1.10	ScalarwfPasswordTimeOut	read-write	mandatory	Timout on Password entry
1.3.6.1.4.1.18.3.3.2.1.11	ScalarwfCommandTimeOut	read-write	mandatory	IF MODEM_ENABLED then time out in minutes to HUP when at the command prompt
1.3.6.1.4.1.18.3.3.2.1.12	ScalarwfLoginRetries	read-write	mandatory	IF MODEM_ENABLED then limit # of login attempts then HUP
1.3.6.1.4.1.18.3.3.2.1.13	ScalarwfTotalLogins	read-only	mandatory	Total number of TI login attempts
1.3.6.1.4.1.18.3.3.2.1.14	ScalarwfUserLoginErrors	read-only	mandatory	Total number of FAILED User login attempts
1.3.6.1.4.1.18.3.3.2.1.15	ScalarwfManagerLoginErrors	read-only	mandatory	Total number of FAILED Manager login attempts
1.3.6.1.4.1.18.3.3.2.1.16	ScalarwfOtherLoginErrors	read-only	mandatory	Total number of FAILED Other login attempts
1.3.6.1.4.1.18.3.3.2.1.17	ScalarwfTtyFrameErrors	read-only	mandatory	Count of TTY Frame errors
1.3.6.1.4.1.18.3.3.2.1.18	ScalarwfTtyOverrunErrors	read-only	mandatory	Count of TTY Overrun errors
1.3.6.1.4.1.18.3.3.2.1.19	ScalarwfTtyParityErrors	read-only	mandatory	Count of TTY Parity errors
1.3.6.1.4.1.18.3.3.2.1.20	ScalarwfTtyInfifoErrors	read-only	mandatory	Count of TTY Input Fifo errors
1.3.6.1.4.1.18.3.3.2.2	NodewfTiRui
1.3.6.1.4.1.18.3.3.2.2.1	ScalarwfTiRuiState	read-only	optional	The state of the ti rui command processor. Idle is normal state. Busy indicates a command is being processed.
1.3.6.1.4.1.18.3.3.2.2.2	ScalarwfTiRuiAction	read-write	optional	Ti command request string
1.3.6.1.4.1.18.3.3.2.2.3	ScalarwfTiRuiResult	read-only	optional	The result of the Ti command requst
1.3.6.1.4.1.18.3.3.2.2.4	ScalarwfTiRuiInReqs	read-only	optional	Total number of command requests
1.3.6.1.4.1.18.3.3.2.2.5	ScalarwfTiRuiOutResults	read-only	optional	Total number of command requests that processed without error
1.3.6.1.4.1.18.3.3.2.2.6	ScalarwfTiRuiOutResultsErr	read-only	optional	Total number of command requests that could not be processed because of errors
1.3.6.1.4.1.18.3.3.2.3	TablewfCircuitNameTable	not-accessible	mandatory	The table of circuit names
1.3.6.1.4.1.18.3.3.2.3.1	RowwfCircuitNameEntry	not-accessible	mandatory	Entry format for the table of circuit names
1.3.6.1.4.1.18.3.3.2.3.1.1	ColumnwfCircuitNameDelete	read-write	mandatory	Creation and deletion flag for this record
1.3.6.1.4.1.18.3.3.2.3.1.2	ColumnwfCircuitNumber	read-only	mandatory	circuit number
1.3.6.1.4.1.18.3.3.2.3.1.3	ColumnwfCircuitName	read-write	mandatory	circuit name
1.3.6.1.4.1.18.3.3.2.3.1.4	ColumnwfCircuitIfType	read-write	mandatory	circuit interface type
1.3.6.1.4.1.18.3.3.2.3.1.5	ColumnwfCircuitProtoMap	read-write	mandatory	The Circuit-Protocol mask
1.3.6.1.4.1.18.3.3.2.5	NodewfGameGroup
1.3.6.1.4.1.18.3.3.2.5.1	TablewfKernelTable	not-accessible	mandatory	Table of kernel statistics, indexed by slot number
1.3.6.1.4.1.18.3.3.2.5.1.1	RowwfKernelEntry	not-accessible	mandatory	A particular interface
1.3.6.1.4.1.18.3.3.2.5.1.1.1	ColumnwfKernelSlot	read-only	mandatory	The slot number indexes the kernel statistics table
1.3.6.1.4.1.18.3.3.2.5.1.1.2	ColumnwfKernelMemorySize	read-only	mandatory	The total size of allocatable memory, in bytes
1.3.6.1.4.1.18.3.3.2.5.1.1.3	ColumnwfKernelMemoryFree	read-only	mandatory	The amount of memory which hasn't been allocated yet, in bytes
1.3.6.1.4.1.18.3.3.2.5.1.1.4	ColumnwfKernelMemorySegsTotal	read-only	mandatory	Total number of memory segments in the kernel
1.3.6.1.4.1.18.3.3.2.5.1.1.5	ColumnwfKernelMemorySegsFree	read-only	mandatory	Total number of unallocated memory segments in the kernel
1.3.6.1.4.1.18.3.3.2.5.1.1.6	ColumnwfKernelMemoryMaxSegFree	read-only	mandatory	Size of the largest unallocated memory segment
1.3.6.1.4.1.18.3.3.2.5.1.1.7	ColumnwfKernelBuffersTotal	read-only	mandatory	Total number of packet buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.8	ColumnwfKernelBuffersFree	read-only	mandatory	Number of packet buffers in the free pool
1.3.6.1.4.1.18.3.3.2.5.1.1.9	ColumnwfKernelTasksTotal	read-only	mandatory	Number of tasks running
1.3.6.1.4.1.18.3.3.2.5.1.1.10	ColumnwfKernelTasksInQueue	read-only	mandatory	Number of tasks awaiting scheduling
1.3.6.1.4.1.18.3.3.2.5.1.1.11	ColumnwfKernelTimersTotal	read-only	mandatory	Total number of timers available
1.3.6.1.4.1.18.3.3.2.5.1.1.12	ColumnwfKernelTimersActive	read-only	mandatory	Total number of timers in use by tasks
1.3.6.1.4.1.18.3.3.2.5.1.1.13	ColumnwfKernelBufOwnerTask1	read-only	mandatory	Activation address of task which owns many buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.14	ColumnwfKernelBufOwnerTask1Bufs	read-only	mandatory	Number of buffers owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.15	ColumnwfKernelBufOwnerTask2	read-only	mandatory	Activation address of task which owns many buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.16	ColumnwfKernelBufOwnerTask2Bufs	read-only	mandatory	Number of buffers owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.17	ColumnwfKernelBufOwnerTask3	read-only	mandatory	Activation address of task which owns many buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.18	ColumnwfKernelBufOwnerTask3Bufs	read-only	mandatory	Number of buffers owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.19	ColumnwfKernelBufOwnerTask4	read-only	mandatory	Activation address of task which owns many buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.20	ColumnwfKernelBufOwnerTask4Bufs	read-only	mandatory	Number of buffers owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.21	ColumnwfKernelBufOwnerTask5	read-only	mandatory	Activation address of task which owns many buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.22	ColumnwfKernelBufOwnerTask5Bufs	read-only	mandatory	Number of buffers owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.23	ColumnwfKernelBufOwnerTask6	read-only	mandatory	Activation address of task which owns many buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.24	ColumnwfKernelBufOwnerTask6Bufs	read-only	mandatory	Number of buffers owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.25	ColumnwfKernelBufOwnerTask7	read-only	mandatory	Activation address of task which owns many buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.26	ColumnwfKernelBufOwnerTask7Bufs	read-only	mandatory	Number of buffers owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.27	ColumnwfKernelBufOwnerTask8	read-only	mandatory	Activation address of task which owns many buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.28	ColumnwfKernelBufOwnerTask8Bufs	read-only	mandatory	Number of buffers owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.29	ColumnwfKernelBufOwnerTask9	read-only	mandatory	Activation address of task which owns many buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.30	ColumnwfKernelBufOwnerTask9Bufs	read-only	mandatory	Number of buffers owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.31	ColumnwfKernelBufOwnerTask10	read-only	mandatory	Activation address of task which owns many buffers
1.3.6.1.4.1.18.3.3.2.5.1.1.32	ColumnwfKernelBufOwnerTask10Bufs	read-only	mandatory	Number of buffers owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.33	ColumnwfKernelMemOwnerTask1	read-only	mandatory	Activation address of task which owns a sizable amount of memory
1.3.6.1.4.1.18.3.3.2.5.1.1.34	ColumnwfKernelMemOwnerTask1Size	read-only	mandatory	Amount of memory owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.35	ColumnwfKernelMemOwnerTask2	read-only	mandatory	Activation address of task which owns a sizable amount of memory
1.3.6.1.4.1.18.3.3.2.5.1.1.36	ColumnwfKernelMemOwnerTask2Size	read-only	mandatory	Amount of memory owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.37	ColumnwfKernelMemOwnerTask3	read-only	mandatory	Activation address of task which owns a sizable amount of memory
1.3.6.1.4.1.18.3.3.2.5.1.1.38	ColumnwfKernelMemOwnerTask3Size	read-only	mandatory	Amount of memory owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.39	ColumnwfKernelMemOwnerTask4	read-only	mandatory	Activation address of task which owns a sizable amount of memory
1.3.6.1.4.1.18.3.3.2.5.1.1.40	ColumnwfKernelMemOwnerTask4Size	read-only	mandatory	Amount of memory owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.41	ColumnwfKernelMemOwnerTask5	read-only	mandatory	Activation address of task which owns a sizable amount of memory
1.3.6.1.4.1.18.3.3.2.5.1.1.42	ColumnwfKernelMemOwnerTask5Size	read-only	mandatory	Amount of memory owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.43	ColumnwfKernelMemOwnerTask6	read-only	mandatory	Activation address of task which owns a sizable amount of memory
1.3.6.1.4.1.18.3.3.2.5.1.1.44	ColumnwfKernelMemOwnerTask6Size	read-only	mandatory	Amount of memory owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.45	ColumnwfKernelMemOwnerTask7	read-only	mandatory	Activation address of task which owns a sizable amount of memory
1.3.6.1.4.1.18.3.3.2.5.1.1.46	ColumnwfKernelMemOwnerTask7Size	read-only	mandatory	Amount of memory owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.47	ColumnwfKernelMemOwnerTask8	read-only	mandatory	Activation address of task which owns a sizable amount of memory
1.3.6.1.4.1.18.3.3.2.5.1.1.48	ColumnwfKernelMemOwnerTask8Size	read-only	mandatory	Amount of memory owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.49	ColumnwfKernelMemOwnerTask9	read-only	mandatory	Activation address of task which owns a sizable amount of memory
1.3.6.1.4.1.18.3.3.2.5.1.1.50	ColumnwfKernelMemOwnerTask9Size	read-only	mandatory	Amount of memory owned by the task
1.3.6.1.4.1.18.3.3.2.5.1.1.51	ColumnwfKernelMemOwnerTask10	read-only	mandatory	Activation address of task which owns a sizable amount of memory
1.3.6.1.4.1.18.3.3.2.5.1.1.52	ColumnwfKernelMemOwnerTask10Size	read-only	mandatory	Amount of memory owned by the task
1.3.6.1.4.1.18.3.4	NodewfLine
1.3.6.1.4.1.18.3.4.1	TablewfCSMACDTable	not-accessible	mandatory	CSMA/CD line record
1.3.6.1.4.1.18.3.4.1.1	RowwfCSMACDEntry	not-accessible	mandatory	An entry in the csmacd table
1.3.6.1.4.1.18.3.4.1.1.1	ColumnwfCSMACDDelete	read-write	mandatory	create/delete parameter, dflt = created
1.3.6.1.4.1.18.3.4.1.1.2	ColumnwfCSMACDEnable	read-write	mandatory	enable/disable parameter, dflt = enabled
1.3.6.1.4.1.18.3.4.1.1.3	ColumnwfCSMACDState	read-only	mandatory	line driver state variable, Not Present, Init, Down, Up
1.3.6.1.4.1.18.3.4.1.1.4	ColumnwfCSMACDSlot	read-only	mandatory	instance ID Slot, filled in by driver
1.3.6.1.4.1.18.3.4.1.1.5	ColumnwfCSMACDConnector	read-only	mandatory	instance ID Connector, filled in by driver
1.3.6.1.4.1.18.3.4.1.1.6	ColumnwfCSMACDCct	read-write	mandatory	cct number for this line instance
1.3.6.1.4.1.18.3.4.1.1.7	ColumnwfCSMACDBofl	read-write	mandatory	bofl parameter, dflt = enabled
1.3.6.1.4.1.18.3.4.1.1.8	ColumnwfCSMACDBoflTmo	read-write	mandatory	bofl parameter, dflt = 5
1.3.6.1.4.1.18.3.4.1.1.9	ColumnwfCSMACDMtu	read-only	mandatory	mtu parameter, fixed
1.3.6.1.4.1.18.3.4.1.1.10	ColumnwfCSMACDMadr	read-only	mandatory	line MAC address, fixed - line driver fills in
1.3.6.1.4.1.18.3.4.1.1.11	ColumnwfCSMACDOctetsRxOk	read-only	mandatory	Number of octets received without error
1.3.6.1.4.1.18.3.4.1.1.12	ColumnwfCSMACDFramesRxOk	read-only	mandatory	Number of frames received without error
1.3.6.1.4.1.18.3.4.1.1.13	ColumnwfCSMACDOctetsTxOk	read-only	mandatory	Number of octets transmitted without error
1.3.6.1.4.1.18.3.4.1.1.14	ColumnwfCSMACDFramesTxOk	read-only	mandatory	Number of frames transmitted without error
1.3.6.1.4.1.18.3.4.1.1.15	ColumnwfCSMACDDeferredTx	read-only	mandatory	Number of deferred transmissions
1.3.6.1.4.1.18.3.4.1.1.16	ColumnwfCSMACDLateCollnTx	read-only	mandatory	Number of late collisions
1.3.6.1.4.1.18.3.4.1.1.17	ColumnwfCSMACDExcessvCollnTx	read-only	mandatory	Number of excessive collisions
1.3.6.1.4.1.18.3.4.1.1.18	ColumnwfCSMACDBablErrorTx	read-only	mandatory	Number of frames transmitted larger than 1518 octets
1.3.6.1.4.1.18.3.4.1.1.19	ColumnwfCSMACDBufErrorTx	read-only	mandatory	Number of internal buffer errors
1.3.6.1.4.1.18.3.4.1.1.20	ColumnwfCSMACDLcarTx	read-only	mandatory	Number of loss of carrier errors
1.3.6.1.4.1.18.3.4.1.1.21	ColumnwfCSMACDUfloTx	read-only	mandatory	Number of transmitter underflow errors
1.3.6.1.4.1.18.3.4.1.1.22	ColumnwfCSMACDFcsErrorRx	read-only	mandatory	Number of receiver checksum errors
1.3.6.1.4.1.18.3.4.1.1.23	ColumnwfCSMACDAlignErrorRx	read-only	mandatory	Number of receiver alignment errors
1.3.6.1.4.1.18.3.4.1.1.24	ColumnwfCSMACDLackRescErrorRx	read-only	mandatory	Number of receiver lack of resource errors
1.3.6.1.4.1.18.3.4.1.1.25	ColumnwfCSMACDTooLongErrorRx	read-only	mandatory	Number of frames received exceeding 1518 octets
1.3.6.1.4.1.18.3.4.1.1.26	ColumnwfCSMACDOfloRx	read-only	mandatory	Number of receiver overflow errors
1.3.6.1.4.1.18.3.4.1.1.27	ColumnwfCSMACDMerr	read-only	mandatory	Number of internal memory errors
1.3.6.1.4.1.18.3.4.1.1.28	ColumnwfCSMACDCerr	read-only	mandatory	Number of collision errors
1.3.6.1.4.1.18.3.4.1.1.29	ColumnwfCSMACDHardwareFilter	read-write	mandatory	Hardware filtering parameter.
1.3.6.1.4.1.18.3.4.1.1.30	ColumnwfCSMACDTxQueueLength	read-write	mandatory	Transmit Queue Length, values larger than the compiled ring size are truncated to the compiled ring size.
1.3.6.1.4.1.18.3.4.1.1.31	ColumnwfCSMACDRxQueueLength	read-write	mandatory	Receive Queue Length, values larger than the compiled ring size are truncated to the compiled ring size.
1.3.6.1.4.1.18.3.4.1.1.32	ColumnwfCSMACDTxClipFrames	read-only	mandatory	Number of frames clipped in driver's transmit routine due to transmit congestion.
1.3.6.1.4.1.18.3.4.1.1.33	ColumnwfCSMACDRxReplenMisses	read-only	mandatory	Number of packet buffer misses while attempting to replenish driver receive ring.
1.3.6.1.4.1.18.3.4.2	TablewfTokenRingTable	not-accessible	mandatory	TOKEN RING line record
1.3.6.1.4.1.18.3.4.2.1	RowwfTokenRingEntry	not-accessible	mandatory	An entry in the token table
1.3.6.1.4.1.18.3.4.2.1.1	ColumnwfTokenRingDelete	read-write	mandatory	create/delete parameter.
1.3.6.1.4.1.18.3.4.2.1.2	ColumnwfTokenRingDisable	read-write	mandatory	enable/disable parameter.
1.3.6.1.4.1.18.3.4.2.1.3	ColumnwfTokenRingState	read-only	mandatory	line driver state variable, Not Present, Init, Down, Up
1.3.6.1.4.1.18.3.4.2.1.4	ColumnwfTokenRingSlot	read-only	mandatory	instance ID Slot, filled in by driver
1.3.6.1.4.1.18.3.4.2.1.5	ColumnwfTokenRingConnector	read-only	mandatory	instance ID Connector, filled in by driver
1.3.6.1.4.1.18.3.4.2.1.6	ColumnwfTokenRingCct	read-write	mandatory	cct number for this line instance, configuration required
1.3.6.1.4.1.18.3.4.2.1.7	ColumnwfTokenRingMtu	read-only	mandatory	mtu parameter, fixed. This mtu of 4568 allows a type 3 Source Route Frame (info=4472) to be IP encapsulated over Token Ring. The components are: AC_FC (2) + SN…
1.3.6.1.4.1.18.3.4.2.1.8	ColumnwfTokenRingMadr	read-only	mandatory	line MAC address, line driver fills in the currently used 48 bit MAC address.
1.3.6.1.4.1.18.3.4.2.1.9	ColumnwfTokenRingCfgMadr	read-write	mandatory	Configured line MAC address. Only used if wfTokenRingMadrSelect is set appropriately.
1.3.6.1.4.1.18.3.4.2.1.10	ColumnwfTokenRingMadrSelect	read-write	mandatory	Selector determines which MAC address the interface will use.
1.3.6.1.4.1.18.3.4.2.1.11	ColumnwfTokenRingSpeed	read-write	mandatory	Token Ring speed parameter - 4 and 16 Mbps are only valid values
1.3.6.1.4.1.18.3.4.2.1.12	ColumnwfTokenRingEarlyTokenRelease	read-write	mandatory	Early Token Release parameter, only valid with 16Mbps
1.3.6.1.4.1.18.3.4.2.1.13	ColumnwfTokenRingStatus	read-only	mandatory	The current interface status. This attribute is only valid when the wfTokenRingOpenState attribute is set to OPENED. The attribute's value is a sum of values, …
1.3.6.1.4.1.18.3.4.2.1.14	ColumnwfTokenRingOpenState	read-only	mandatory	The current interface state with respect to entering or leaving the ring.
1.3.6.1.4.1.18.3.4.2.1.15	ColumnwfTokenRingOpenStatus	read-only	mandatory	Indicates the success, or the reason for failure, of the station's most recent attempt to enter the ring.
1.3.6.1.4.1.18.3.4.2.1.16	ColumnwfTokenRingUpStream	read-only	mandatory	MAC address of Up Stream neighbor. Only valid when 'opened'.
1.3.6.1.4.1.18.3.4.2.1.17	ColumnwfTokenRingRxOctets	read-only	mandatory	Number of octets received without error.
1.3.6.1.4.1.18.3.4.2.1.18	ColumnwfTokenRingRxFrames	read-only	mandatory	Number of frames received without error.
1.3.6.1.4.1.18.3.4.2.1.19	ColumnwfTokenRingTxOctets	read-only	mandatory	Number of octets transmitted without error.
1.3.6.1.4.1.18.3.4.2.1.20	ColumnwfTokenRingTxFrames	read-only	mandatory	Number of frames transmitted without error.
1.3.6.1.4.1.18.3.4.2.1.21	ColumnwfTokenRingInDiscards	read-only	mandatory	Number of error-free inbound packets discarded. Usually due to lack of memory resources. This is equivalent to wfTokenRingRxCongestionErrors.
1.3.6.1.4.1.18.3.4.2.1.22	ColumnwfTokenRingInErrors	read-only	mandatory	Number of inbound packets not delivered to higher-layer protocol due to errors. The sum of wfTokenRingLineErrors and wfTokenRingBurstErrors.
1.3.6.1.4.1.18.3.4.2.1.23	ColumnwfTokenRingOutDiscards	read-only	mandatory	Number of error-free outbound packets discarded. Usually due to lack of transmission bandwidth. This is equivalent to wfTokenRingTxClipFrames.
1.3.6.1.4.1.18.3.4.2.1.24	ColumnwfTokenRingOutErrors	read-only	mandatory	Number of outbound packets that could not be transmitted because of errors. This is equivalent to wfTokenRingLostFrameErrors.
1.3.6.1.4.1.18.3.4.2.1.25	ColumnwfTokenRingTxClipFrames	read-only	mandatory	Number of frames clipped in driver's transmit routine due to transmit congestion.
1.3.6.1.4.1.18.3.4.2.1.26	ColumnwfTokenRingRxReplenMisses	read-only	mandatory	Number of packet buffer misses while attempting to replenish driver receive ring.
1.3.6.1.4.1.18.3.4.2.1.27	ColumnwfTokenRingSignalLosses	read-only	mandatory	Number of ring signal losses detected.
1.3.6.1.4.1.18.3.4.2.1.28	ColumnwfTokenRingHardErrors	read-only	mandatory	Number of events causing the adapter to transmit or receive beacon MAC frames.
1.3.6.1.4.1.18.3.4.2.1.29	ColumnwfTokenRingSoftErrors	read-only	mandatory	Number of soft errors. Corresponds to the number of Report Error MAC frames transmitted by this station.
1.3.6.1.4.1.18.3.4.2.1.30	ColumnwfTokenRingTransmitBeacons	read-only	mandatory	Number of events causing the adapter to transmit beacon frames.
1.3.6.1.4.1.18.3.4.2.1.31	ColumnwfTokenRingLobeWireFaults	read-only	mandatory	Number of opens or shorts (cable faults) between the adapter and the MAU.
1.3.6.1.4.1.18.3.4.2.1.32	ColumnwfTokenRingAutoRemovalErrors	read-only	mandatory	Number of lobe wrap test failures during beacon auto_removal process.
1.3.6.1.4.1.18.3.4.2.1.33	ColumnwfTokenRingRequestRemoves	read-only	mandatory	Number of Remove Ring Station MAC frames received. Each frame causes this station to leave the ring.
1.3.6.1.4.1.18.3.4.2.1.34	ColumnwfTokenRingCounterOverflows	read-only	mandatory	Number of adapter error counter overflows.
1.3.6.1.4.1.18.3.4.2.1.35	ColumnwfTokenRingSingleStations	read-only	mandatory	Number of ring status change interrupts while adapter is only station on the ring.
1.3.6.1.4.1.18.3.4.2.1.36	ColumnwfTokenRingRingRecoveries	read-only	mandatory	Number of claim token MAC frames (ring recoveries) observed on the ring.
1.3.6.1.4.1.18.3.4.2.1.37	ColumnwfTokenRingAdapterChecks	read-only	mandatory	Number of internal adapter errors that result in adapter crashes.
1.3.6.1.4.1.18.3.4.2.1.38	ColumnwfTokenRingFirstAdapterCheckCode	read-only	mandatory	Adapter Check Code of first occurrence.
1.3.6.1.4.1.18.3.4.2.1.39	ColumnwfTokenRingLastAdapterCheckCode	read-only	mandatory	Adapter Check Code of most recent (last) occurrence.
1.3.6.1.4.1.18.3.4.2.1.40	ColumnwfTokenRingLineErrors	read-only	mandatory	Number of frames copied or repeated by this station with bad format or an FCS error.
1.3.6.1.4.1.18.3.4.2.1.41	ColumnwfTokenRingBurstErrors	read-only	mandatory	Number of errored frames with no transition for 5 1/2 bit times.
1.3.6.1.4.1.18.3.4.2.1.42	ColumnwfTokenRingAriFciErrors	read-only	mandatory	Number of occurrences of this station receiving both an AMP MAC frame and a SMP MAC frame with the a & c bits clear or more than one SMP MAC frame with the a &…
1.3.6.1.4.1.18.3.4.2.1.43	ColumnwfTokenRingLostFrameErrors	read-only	mandatory	Number of frames being stripped which are missing their tails.
1.3.6.1.4.1.18.3.4.2.1.44	ColumnwfTokenRingRxCongestionErrors	read-only	mandatory	Number of frames dropped due to receive congestion.
1.3.6.1.4.1.18.3.4.2.1.45	ColumnwfTokenRingFrameCopiedErrors	read-only	mandatory	Number of specifically addressed frames for this station that had their a & c bits previously set.
1.3.6.1.4.1.18.3.4.2.1.46	ColumnwfTokenRingTokenErrors	read-only	mandatory	Number of token protocol errors. Only relevant when this station is the active monitor.
1.3.6.1.4.1.18.3.4.2.1.47	ColumnwfTokenRingDmaBusErrors	read-only	mandatory	Number of bus errors during DMA that do not exceed threshold.
1.3.6.1.4.1.18.3.4.2.1.48	ColumnwfTokenRingDmaParityErrors	read-only	mandatory	Number of parity errors during DMA that do not exceed threshold.
1.3.6.1.4.1.18.3.4.2.1.49	ColumnwfTokenRingSrbNotFreeCmdAborts	read-only	mandatory	Number of host to adapter commands aborted because of in-completed in process commands.
1.3.6.1.4.1.18.3.4.2.1.50	ColumnwfTokenRingRxProcessings	read-only	mandatory	Number of processings of received frames (similar to RINT).
1.3.6.1.4.1.18.3.4.2.1.51	ColumnwfTokenRingTxProcessings	read-only	mandatory	Number of processings of frames for transmit.
1.3.6.1.4.1.18.3.4.2.1.52	ColumnwfTokenRingTxCmplProcessings	read-only	mandatory	Number of processings of transmitted frames (similar to TINT).
1.3.6.1.4.1.18.3.4.2.1.53	ColumnwfTokenRingRxTimeouts	read-only	mandatory	Number of re-initializations due to receiver time-outs.
1.3.6.1.4.1.18.3.4.2.1.54	ColumnwfTokenRingCmdTimeouts	read-only	mandatory	Number of re-initializations due to command time-outs.
1.3.6.1.4.1.18.3.4.2.1.55	ColumnwfTokenRingRxHostIntErrors	read-only	mandatory	Number of re-initializations due to receive host interface errors.
1.3.6.1.4.1.18.3.4.2.1.56	ColumnwfTokenRingRxTxBufferSize	read-only	mandatory	Internal Adapter RAM buffer size.
1.3.6.1.4.1.18.3.4.4	TablewfFddiTable	not-accessible	mandatory	FDDI line record
1.3.6.1.4.1.18.3.4.4.1	RowwfFddiEntry	not-accessible	mandatory	An entry in the FDDI table
1.3.6.1.4.1.18.3.4.4.1.1	ColumnwfFDDIDelete	read-write	mandatory	create/delete parameter, default = created
1.3.6.1.4.1.18.3.4.4.1.2	ColumnwfFDDIEnable	read-write	mandatory	enable/disable parameter, default = enabled
1.3.6.1.4.1.18.3.4.4.1.3	ColumnwfFDDIState	read-only	mandatory	line driver state variable, not present, init, down, up
1.3.6.1.4.1.18.3.4.4.1.4	ColumnwfFDDISlot	read-only	mandatory	instance ID slot - filled in by driver
1.3.6.1.4.1.18.3.4.4.1.5	ColumnwfFDDINode	read-only	mandatory	instance ID Node - filled in by driver
1.3.6.1.4.1.18.3.4.4.1.6	ColumnwfFDDICct	read-write	mandatory	cct number for this line instance
1.3.6.1.4.1.18.3.4.4.1.7	ColumnwfFDDIBofl	read-write	mandatory	bofl parameter, default = enabled
1.3.6.1.4.1.18.3.4.4.1.8	ColumnwfFDDIBoflTmo	read-write	mandatory	bofl parameter, default = 5 seconds
1.3.6.1.4.1.18.3.4.4.1.9	ColumnwfFDDIMtu	read-only	mandatory	mtu parameter, fixed
1.3.6.1.4.1.18.3.4.4.1.10	ColumnwfFDDIMadr	read-only	mandatory	line MAC address, fixed - line driver fills in
1.3.6.1.4.1.18.3.4.4.1.11	ColumnwfFDDIOctetsRxOk	read-only	mandatory	Number of bytes received without error
1.3.6.1.4.1.18.3.4.4.1.12	ColumnwfFDDIFramesRxOk	read-only	mandatory	Number of frames received without error
1.3.6.1.4.1.18.3.4.4.1.13	ColumnwfFDDIOctetsTxOk	read-only	mandatory	Number of bytes transmitted without error
1.3.6.1.4.1.18.3.4.4.1.14	ColumnwfFDDIFramesTxOk	read-only	mandatory	Number of frames transmitted without error
1.3.6.1.4.1.18.3.4.4.1.15	ColumnwfFDDICrcErrRx	read-only	mandatory	Number of frames received with CRC errors
1.3.6.1.4.1.18.3.4.4.1.16	ColumnwfFDDIOverrunRx	read-only	mandatory	Number of frames received with internal overrun errors
1.3.6.1.4.1.18.3.4.4.1.17	ColumnwfFDDIParityErrRx	read-only	mandatory	Number of frames received with parity errors
1.3.6.1.4.1.18.3.4.4.1.18	ColumnwfFDDIMacErrRx	read-only	mandatory	Number of frames received with mac errors
1.3.6.1.4.1.18.3.4.4.1.19	ColumnwfFDDIRingErrRx	read-only	mandatory	Number of receive ring error events
1.3.6.1.4.1.18.3.4.4.1.20	ColumnwfFDDISmtRingErrRx	read-only	mandatory	Number of SMT receive ring error events
1.3.6.1.4.1.18.3.4.4.1.21	ColumnwfFDDIRingOverrunRx	read-only	mandatory	Number of LLC receive ring overrun events
1.3.6.1.4.1.18.3.4.4.1.22	ColumnwfFDDISmtRingOverrunRx	read-only	mandatory	Number of SMT receive ring overrun events
1.3.6.1.4.1.18.3.4.4.1.23	ColumnwfFDDIAbortTx	read-only	mandatory	Number of transmit frames with internal abort errors
1.3.6.1.4.1.18.3.4.4.1.24	ColumnwfFDDIUnderrunTx	read-only	mandatory	Number of transmit frames aborted with underrun errors
1.3.6.1.4.1.18.3.4.4.1.25	ColumnwfFDDIParityErrTx	read-only	mandatory	Number of transmit frames aborted with parity errors
1.3.6.1.4.1.18.3.4.4.1.26	ColumnwfFDDIRingErrTx	read-only	mandatory	Number of LLC/SMT transmit ring error events
1.3.6.1.4.1.18.3.4.4.1.27	ColumnwfFDDIPortOpErr	read-only	mandatory	Number of port operation error events
1.3.6.1.4.1.18.3.4.4.1.28	ColumnwfFDDIInternOpErr	read-only	mandatory	Number of internal operation error events
1.3.6.1.4.1.18.3.4.4.1.29	ColumnwfFDDIHostErr	read-only	mandatory	Number of host error events
1.3.6.1.4.1.18.3.4.4.1.30	ColumnwfFDDISmtConnectionPolicy	read-write	mandatory	A value that indicates the connection policies enforced at the station. A station sets the corresponding policy for each of the connection types that it reject…
1.3.6.1.4.1.18.3.4.4.1.31	ColumnwfFDDISmtTNotify	read-write	mandatory	The timer used in the Neighbor Notification protocol, reported in seconds and ranging from 2 to 30 seconds.
1.3.6.1.4.1.18.3.4.4.1.32	ColumnwfFDDIMacTReq	read-write	mandatory	The requested Target Token Rotation Time (TTRT) for a MAC's synchronous traffic represented in unsigned integer specifying time in octet units (80 nanoseconds).
1.3.6.1.4.1.18.3.4.4.1.33	ColumnwfFDDIMacTMax	read-only	mandatory	The requested maximum TTRT to be supported by a MAC represented in unsigned integer specifying time in octet units (80 nanoseconds).
1.3.6.1.4.1.18.3.4.4.1.34	ColumnwfFDDIMacTvxValue	read-only	mandatory	The requested value of TvxValue represented in unsigned integer specifying time in octet units (80 nanoseconds).
1.3.6.1.4.1.18.3.4.4.1.35	ColumnwfFDDIMacTMin	read-only	mandatory	The requested minimum TTRT to be requested by a MAC represented in unsigned integer specifying time in octet units (80 nanoseconds).
1.3.6.1.4.1.18.3.4.4.1.36	ColumnwfFDDIHardwareFilter	read-write	mandatory	Hardware filter (CAM) parameter.
1.3.6.1.4.1.18.3.4.4.1.37	ColumnwfFDDISmtEnable	read-write	mandatory
1.3.6.1.4.1.18.3.4.4.1.38	ColumnwfFDDITxQueueLength	read-write	mandatory	Transmit Queue Length, values larger than the compiled ring size are truncated to the compiled ring size.
1.3.6.1.4.1.18.3.4.4.1.39	ColumnwfFDDIRxQueueLength	read-write	mandatory	Receive Queue Length, values larger than the compiled ring size are truncated to the compiled ring size.
1.3.6.1.4.1.18.3.4.4.1.40	ColumnwfFDDITxClipFrames	read-only	mandatory	Number of frames clipped in driver's transmit routine due to transmit congestion.
1.3.6.1.4.1.18.3.4.4.1.41	ColumnwfFDDIRxReplenMisses	read-only	mandatory	Number of packet buffer misses while attempting to replenish driver receive ring.
1.3.6.1.4.1.18.3.4.5	TablewfSyncTable	not-accessible	mandatory	SYNC line record
1.3.6.1.4.1.18.3.4.5.1	RowwfSyncEntry	not-accessible	mandatory	An entry in the SYNC table
1.3.6.1.4.1.18.3.4.5.1.1	ColumnwfSyncDelete	read-write	mandatory	Create/Delete parameter
1.3.6.1.4.1.18.3.4.5.1.2	ColumnwfSyncDisable	read-write	mandatory	Enable/Disable parameter
1.3.6.1.4.1.18.3.4.5.1.3	ColumnwfSyncState	read-only	mandatory	Line Driver state variable, Not Present, Init, Down, Up
1.3.6.1.4.1.18.3.4.5.1.4	ColumnwfSyncSlot	read-only	mandatory	Instance ID Slot, filled in by driver
1.3.6.1.4.1.18.3.4.5.1.5	ColumnwfSyncConnector	read-only	mandatory	Instance ID Connector, filled in by driver
1.3.6.1.4.1.18.3.4.5.1.6	ColumnwfSyncCct	read-write	mandatory	CCT number for this line instance
1.3.6.1.4.1.18.3.4.5.1.7	ColumnwfSyncBofl	read-write	mandatory	breath of life parameter
1.3.6.1.4.1.18.3.4.5.1.8	ColumnwfSyncBoflTmo	read-write	mandatory	breath of life timeout in seconds
1.3.6.1.4.1.18.3.4.5.1.9	ColumnwfSyncMtu	read-write	mandatory	MTU parameter, this is buffer size for SYNC media, fixed
1.3.6.1.4.1.18.3.4.5.1.10	ColumnwfSyncMadr	read-only	mandatory	Line MAC address, fixed - line driver fills in from the 48 bit address stored in the serial number prom for this connector.
1.3.6.1.4.1.18.3.4.5.1.11	ColumnwfSyncPromiscuous	read-write	mandatory	The promiscuous parameter allows address filtering based on the local and remote addresses. When enabled, all frames are received, disabled indicates only fram…
1.3.6.1.4.1.18.3.4.5.1.12	ColumnwfSyncXid	read-write	mandatory	XID enable/disable parameter. This parameter is used to enable or disable transmission/reception of Test XID frames.
1.3.6.1.4.1.18.3.4.5.1.13	ColumnwfSyncClkSource	read-write	mandatory	Tx/Rx clock source is either internally or external generated.
1.3.6.1.4.1.18.3.4.5.1.14	ColumnwfSyncClkSpeed	read-write	mandatory	Tx/Rx clock speed. This speed selection is valid only when the internal clock speed parameter has been selected.
1.3.6.1.4.1.18.3.4.5.1.15	ColumnwfSyncSignalMode	read-write	mandatory	The signal mode parameter indicates the line paramter balanced or unbalanced.
1.3.6.1.4.1.18.3.4.5.1.16	ColumnwfSyncRtsEnable	read-write	mandatory	The RTS parameter enables/disables detection of RTS signals on the interface. Normal default mode is running without RTS enabled.
1.3.6.1.4.1.18.3.4.5.1.17	ColumnwfSyncBurstCount	read-write	mandatory	Allows single or multiple DMA burst cycles. When enabled the chip performs 8 word burst's. Single word cycles are performed when disabled
1.3.6.1.4.1.18.3.4.5.1.18	ColumnwfSyncService	read-write	mandatory	Service type for this circuit. Transparent is raw HDLC mode, LLC1 will prefix the HDLC address and control fields to the frame. The LLC2 service provides the L…
1.3.6.1.4.1.18.3.4.5.1.19	ColumnwfSyncRetryCount	read-write	mandatory	The Retry count parameter indicates the number of retransmission attempts which will be tried per frame before a line is determined to be down. The retry count…
1.3.6.1.4.1.18.3.4.5.1.20	ColumnwfSyncLinkIdleTimer	read-write	mandatory	The link idle parameter is the number of seconds before a line has been determined to be idle. An idle line is considered disconnectd This value is expressed i…
1.3.6.1.4.1.18.3.4.5.1.21	ColumnwfSyncRetryTimer	read-write	mandatory	The Retry Timer parameter indicates the timeout in seconds for a response to be heard form the link. Link control frames are sent at the expiration of this tim…
1.3.6.1.4.1.18.3.4.5.1.22	ColumnwfSyncExtendedAddress	read-write	mandatory	This parameter controls length determination of the address field. When this parameter is enabled, the first bit of the address field be tested to determine th…
1.3.6.1.4.1.18.3.4.5.1.23	ColumnwfSyncExtendedAddressForce	read-write	mandatory	When this parameter is enabled, the receiver will assume that all address fields are 2 octets in length regardless of the first two bits of the control field. …
1.3.6.1.4.1.18.3.4.5.1.24	ColumnwfSyncExtendedControl	read-write	mandatory	This parameter allows the control fields of all S and I frames to become 2 octets in length instead of one. Numbering of all I frame become modulo 128 instead …
1.3.6.1.4.1.18.3.4.5.1.25	ColumnwfSyncExtendedControlForce	read-write	mandatory	This parameter when enabled will force all control fields to become two octets in length regardless the first two bits in the control field. Usefull only in Tr…
1.3.6.1.4.1.18.3.4.5.1.26	ColumnwfSyncConnectAttempts	read-write	mandatory	This parameter controls the number of connection attempts which will be made during a LAPB connection request. This parameter is applicable only during LLC2 se…
1.3.6.1.4.1.18.3.4.5.1.27	ColumnwfSyncWindowSizeTx	read-write	mandatory	The window size parameter controls the number of I frames which may be transmitted without acknowledgement. Non EXTC mode.
1.3.6.1.4.1.18.3.4.5.1.28	ColumnwfSyncWindowSizeTxExtc	read-write	mandatory	The window size parameter controls the number of I frames which may be transmitted without acknowledgement in EXTC mode.
1.3.6.1.4.1.18.3.4.5.1.29	ColumnwfSyncMinFrameSpace	read-write	mandatory	The minimum frame spacing parameter defines the number of flags that are transmitted between adjacent frames.
1.3.6.1.4.1.18.3.4.5.1.30	ColumnwfSyncLocalAddress	read-write	mandatory	The local address parameter contains the DTE,DCE or EXPLICIT value expressed as a single octet. It may be extended to 2 octets if EXTA has been set.
1.3.6.1.4.1.18.3.4.5.1.31	ColumnwfSyncRemoteAddress	read-write	mandatory	The remote address parameter contains the DTE,DCE or EXPLICIT value expressed as a single octet. It may be extended to 2 octets if EXTA has been set.
1.3.6.1.4.1.18.3.4.5.1.32	ColumnwfSyncPassThruLocalMadr	read-write	mandatory	48 bit MAC address of Local end of Sync Passthru circuit
1.3.6.1.4.1.18.3.4.5.1.33	ColumnwfSyncPassThruRemoteMadr	read-write	mandatory	48 bit MAC address of Remote end of Sync Passthru circuit
1.3.6.1.4.1.18.3.4.5.1.34	ColumnwfSyncWanProtocol	read-write	mandatory	WAN protocol selection is provided via this parameter. The supported protocols can be selected per interface.
1.3.6.1.4.1.18.3.4.5.1.35	ColumnwfSyncCrcSize	read-write	mandatory	CRC size parameter, 16 bit standard CCITT or extended 32 bit CRC
1.3.6.1.4.1.18.3.4.5.1.36	ColumnwfSyncRxOctets	read-only	mandatory	Number of octets received without error
1.3.6.1.4.1.18.3.4.5.1.37	ColumnwfSyncRxFrames	read-only	mandatory	Number of frames received without error
1.3.6.1.4.1.18.3.4.5.1.38	ColumnwfSyncTxOctets	read-only	mandatory	Number of octets transmitted without error
1.3.6.1.4.1.18.3.4.5.1.39	ColumnwfSyncTxFrames	read-only	mandatory	Number of frames transmitted without error
1.3.6.1.4.1.18.3.4.5.1.40	ColumnwfSyncRxErrors	read-only	mandatory	Number of receive errors
1.3.6.1.4.1.18.3.4.5.1.41	ColumnwfSyncTxErrors	read-only	mandatory	Number of transmission errors
1.3.6.1.4.1.18.3.4.5.1.42	ColumnwfSyncLackRescRx	read-only	mandatory	Number of Rx frames dropped due to lack of buffer resources
1.3.6.1.4.1.18.3.4.5.1.43	ColumnwfSyncLackRescTx	read-only	mandatory	Number of Tx frames dropped due to lack of buffer resources
1.3.6.1.4.1.18.3.4.5.1.44	ColumnwfSyncUnderFlowTx	read-only	mandatory	Number of transmission underflows, device FIFO went empty before next DMA request was granted.
1.3.6.1.4.1.18.3.4.5.1.45	ColumnwfSyncRejectsTx	read-only	mandatory	Number of reject frames which were transmitted
1.3.6.1.4.1.18.3.4.5.1.46	ColumnwfSyncRejectsRx	read-only	mandatory	Number of reject frames which were received
1.3.6.1.4.1.18.3.4.5.1.47	ColumnwfSyncOverFlowRx	read-only	mandatory	Number of receive overflows, device FIFO overflowed before next DMA cycle granted. No buffer resources available.
1.3.6.1.4.1.18.3.4.5.1.48	ColumnwfSyncFramesIncompRx	read-only	mandatory	Number of frames which were incompletely received. These are frames which may have resulted from FRMRR errors.
1.3.6.1.4.1.18.3.4.5.1.49	ColumnwfSyncBadFramesRx	read-only	mandatory	Number of bad receive frames, caused by FCS errors or non octet aligned.
1.3.6.1.4.1.18.3.4.5.1.50	ColumnwfSyncFrameRejectsRx	read-only	mandatory	Number of Frame Rejects received
1.3.6.1.4.1.18.3.4.5.1.51	ColumnwfSyncRuntsRx	read-only	mandatory	Number of runt frames received
1.3.6.1.4.1.18.3.4.5.1.52	ColumnwfSyncT1Timeouts	read-only	mandatory	Number of T1 timeout's detected. The T1 timer is the link retransmission timer. Link control frames will be retransmitted when T1 expires. This is a count of t…
1.3.6.1.4.1.18.3.4.5.1.53	ColumnwfSyncMemoryErrors	read-only	mandatory	Number of memory access errors detected. A MERR is the expiration of a DMA cycle without the bus being granted within 26us.
1.3.6.1.4.1.18.3.4.5.1.54	ColumnwfSyncMediaType	read-write	mandatory	Media type selection is provided via this parameter
1.3.6.1.4.1.18.3.4.6	NodewfHwFGroup
1.3.6.1.4.1.18.3.4.6.1	TablewfHwfTable	not-accessible	mandatory	The following table will contain information about a collection of Hardware Filter (HWF) driver records. Only one HWF driver may be spawned, by the loader, on …
1.3.6.1.4.1.18.3.4.6.1.1	RowwfHwfEntry	not-accessible	mandatory	Slot number used as instance identifier.
1.3.6.1.4.1.18.3.4.6.1.1.1	ColumnwfHwfDelete	read-write	mandatory	Create/delete parameter.
1.3.6.1.4.1.18.3.4.6.1.1.2	ColumnwfHwfEnable	read-write	mandatory	Enable/disable parameter.
1.3.6.1.4.1.18.3.4.6.1.1.3	ColumnwfHwfState	read-only	mandatory	Driver state variable.
1.3.6.1.4.1.18.3.4.6.1.1.4	ColumnwfHwfSlot	read-only	mandatory
1.3.6.1.4.1.18.3.4.6.1.1.5	ColumnwfHwfAvailableLines	read-only	mandatory	Number of available lines on module.
1.3.6.1.4.1.18.3.4.6.2	TablewfHwfLineTable	not-accessible	mandatory	The following table will contain information about a collection of Hardware Filter (HWF) line records.
1.3.6.1.4.1.18.3.4.6.2.1	RowwfHwfLineEntry	not-accessible	mandatory	Slot number and line number used as instance identifier.
1.3.6.1.4.1.18.3.4.6.2.1.1	ColumnwfHwfLineState	read-only	mandatory	State of filtering hardware on a per line basis.
1.3.6.1.4.1.18.3.4.6.2.1.2	ColumnwfHwfLineSlot	read-only	mandatory
1.3.6.1.4.1.18.3.4.6.2.1.3	ColumnwfHwfLineNumber	read-only	mandatory
1.3.6.1.4.1.18.3.4.6.2.1.4	ColumnwfHwfLineCct	read-only	mandatory	Circuit number associated with a line.
1.3.6.1.4.1.18.3.4.6.2.1.5	ColumnwfHwfLineCapableMaxTblSize	read-only	mandatory	This attribute specifies the maximum number of table entries capable of being used by a line based upon actual hardware filter devices present and available.
1.3.6.1.4.1.18.3.4.6.2.1.6	ColumnwfHwfLineCurrentTblSize	read-only	mandatory	Current capacity of the hardware filter table. Hardware filter table resources are dynamically allocated (in increments of 256) on an as-needed basis up to the…
1.3.6.1.4.1.18.3.4.6.2.1.7	ColumnwfHwfLineCurrentUsedEntries	read-only	mandatory	Number of hardware filter table entries used.
1.3.6.1.4.1.18.3.4.6.2.1.8	ColumnwfHwfLineDroppedFrames	read-only	mandatory	Number of frames dropped because of hardware filter match.
1.3.6.1.4.1.18.3.4.7	TablewfHssiTable	not-accessible	mandatory	HSSI line record
1.3.6.1.4.1.18.3.4.7.1	RowwfHssiEntry	not-accessible	mandatory	An entry in the HSSI table
1.3.6.1.4.1.18.3.4.7.1.1	ColumnwfHssiDelete	read-write	mandatory	Create/Delete parameter
1.3.6.1.4.1.18.3.4.7.1.2	ColumnwfHssiDisable	read-write	mandatory	Enable/Disable parameter
1.3.6.1.4.1.18.3.4.7.1.3	ColumnwfHssiState	read-only	mandatory	Line Driver state variable, Not Present, Init, Down, Up
1.3.6.1.4.1.18.3.4.7.1.4	ColumnwfHssiSlot	read-only	mandatory	Instance ID Slot, filled in by driver
1.3.6.1.4.1.18.3.4.7.1.5	ColumnwfHssiConnector	read-only	mandatory	Instance ID Connector, filled in by driver
1.3.6.1.4.1.18.3.4.7.1.6	ColumnwfHssiCct	read-write	mandatory	CCT number for this line instance
1.3.6.1.4.1.18.3.4.7.1.7	ColumnwfHssiBofl	read-write	mandatory	breath of life parameter
1.3.6.1.4.1.18.3.4.7.1.8	ColumnwfHssiBoflTmo	read-write	mandatory	breath of life frequency in seconds
1.3.6.1.4.1.18.3.4.7.1.9	ColumnwfHssiMtu	read-write	mandatory	MTU parameter, this is buffer size for HSSI media, fixed
1.3.6.1.4.1.18.3.4.7.1.10	ColumnwfHssiMadr	read-only	mandatory	Line MAC address, fixed - line driver fills in from the 48 bit address stored in the serial number prom for this connector.
1.3.6.1.4.1.18.3.4.7.1.11	ColumnwfHssiService	read-write	mandatory	Service type for this circuit. Transparent is raw HDLC mode, and is the only service provided on the current HSSI product
1.3.6.1.4.1.18.3.4.7.1.12	ColumnwfHssiWanProtocol	read-write	mandatory	WAN protocol selection is provided via this parameter. The supported protocols can be selected per interface.
1.3.6.1.4.1.18.3.4.7.1.13	ColumnwfHssiTransmissionInterface	read-write	mandatory	T1 or T3, in the future OC1, OC3 and OC12. Used for MIB selection
1.3.6.1.4.1.18.3.4.7.1.14	ColumnwfHssiExternalClkSpeed	read-write	mandatory	External Clock Speed, Used in the future for route selection
1.3.6.1.4.1.18.3.4.7.1.15	ColumnwfHssiCrcSize	read-write	mandatory	CRC size parameter, 16 bit standard CCITT or extended 32 bit CRC
1.3.6.1.4.1.18.3.4.7.1.16	ColumnwfHssiInternalClkTestMode	read-write	mandatory	Enables internal transmit clock generation. Should NEVER be enabled for normal operation.
1.3.6.1.4.1.18.3.4.7.1.17	ColumnwfHssiRxOctets	read-only	mandatory	Number of bytes received without error
1.3.6.1.4.1.18.3.4.7.1.18	ColumnwfHssiRxFrames	read-only	mandatory	Number of frames received without error
1.3.6.1.4.1.18.3.4.7.1.19	ColumnwfHssiTxOctets	read-only	mandatory	Number of bytes transmitted without error
1.3.6.1.4.1.18.3.4.7.1.20	ColumnwfHssiTxFrames	read-only	mandatory	Number of frames transmitted without error
1.3.6.1.4.1.18.3.4.7.1.21	ColumnwfHssiInDiscards	read-only	mandatory	Number of error-free inbound packets discarded. Usually due to lack of memory resources.
1.3.6.1.4.1.18.3.4.7.1.22	ColumnwfHssiInErrors	read-only	mandatory	Number of inbound packets not delivered to higher-layer protocol because of errors.
1.3.6.1.4.1.18.3.4.7.1.23	ColumnwfHssiOutDiscards	read-only	mandatory	Number of error-free outbound packets discarded. Usually due to lack of transmission bandwidth.
1.3.6.1.4.1.18.3.4.7.1.24	ColumnwfHssiOutErrors	read-only	mandatory	Number of outbound packets that could not be transmitted because of errors.
1.3.6.1.4.1.18.3.4.7.1.25	ColumnwfHssiRxLongFrames	read-only	mandatory	Number of Long frames dropped on receive because of length
1.3.6.1.4.1.18.3.4.7.1.26	ColumnwfHssiTxClipFrames	read-only	mandatory	Number of frames clipped in the transmit routine
1.3.6.1.4.1.18.3.4.7.1.27	ColumnwfHssiRxReplenMisses	read-only	mandatory	Number of failed attempts by the line driver to aquire a packet buffer
1.3.6.1.4.1.18.3.4.7.1.28	ColumnwfHssiLastRxErrorCtrl	read-only	mandatory	Last errored receive descriptor's control field
1.3.6.1.4.1.18.3.4.7.1.29	ColumnwfHssiRxCrcErrors	read-only	mandatory	Number of frames received with CRC errors
1.3.6.1.4.1.18.3.4.7.1.30	ColumnwfHssiRxOverruns	read-only	mandatory	Number of frames received with fifo overrun errors
1.3.6.1.4.1.18.3.4.7.1.31	ColumnwfHssiRxAborts	read-only	mandatory	Number of frames received with abort status
1.3.6.1.4.1.18.3.4.7.1.32	ColumnwfHssiLastTxErrorCtrl	read-only	mandatory	Last errored transmit descriptor's control field
1.3.6.1.4.1.18.3.4.7.1.33	ColumnwfHssiTxAborts	read-only	mandatory	Number of transmit frames with internal abort errors
1.3.6.1.4.1.18.3.4.7.1.34	ColumnwfHssiTxUnderruns	read-only	mandatory	Number of transmit frames aborted with underrun errors
1.3.6.1.4.1.18.3.4.7.1.35	ColumnwfHssiRxRingErrors	read-only	mandatory	Number of receive ring error events
1.3.6.1.4.1.18.3.4.7.1.36	ColumnwfHssiLastRxRingState	read-only	mandatory	Last 8 bit value from the recv ring state register
1.3.6.1.4.1.18.3.4.7.1.37	ColumnwfHssiRxRingOverruns	read-only	mandatory	Number of receive ring overrun events
1.3.6.1.4.1.18.3.4.7.1.38	ColumnwfHssiTxRingErrors	read-only	mandatory	Number of transmit ring error events
1.3.6.1.4.1.18.3.4.7.1.39	ColumnwfHssiLastTxRingState	read-only	mandatory	Last 8 bit value from the transmit ring state register
1.3.6.1.4.1.18.3.4.7.1.40	ColumnwfHssiPortOpErrors	read-only	mandatory	Number of port operation error events
1.3.6.1.4.1.18.3.4.7.1.41	ColumnwfHssiInternOpErrors	read-only	mandatory	Number of internal operation error events
1.3.6.1.4.1.18.3.4.7.1.42	ColumnwfHssiHostErrors	read-only	mandatory	Number of parity errs on host accesses to directly accessable registers.
1.3.6.1.4.1.18.3.4.7.1.43	ColumnwfHssiRxProcessings	read-only	mandatory	Number of receive frame processings (RINT)
1.3.6.1.4.1.18.3.4.7.1.44	ColumnwfHssiTxProcessings	read-only	mandatory	Number of transmit processings, invokations of transmit routine
1.3.6.1.4.1.18.3.4.7.1.45	ColumnwfHssiTxCmplProcessings	read-only	mandatory	Number of transmit complete processings (TINT)
1.3.6.1.4.1.18.3.4.7.1.46	ColumnwfHssiIntrProcessings	read-only	mandatory	Number of Interrupt processings, invokations of intr routine
1.3.6.1.4.1.18.3.4.7.1.47	ColumnwfHssiBoflNum	read-write	mandatory	Number of breath of life packets per breath of life
1.3.6.1.4.1.18.3.4.7.1.48	ColumnwfHssiBoflLen	read-write	mandatory	breath of life packet length
1.3.6.1.4.1.18.3.4.7.1.49	ColumnwfHssiRxBufferLength	read-write	mandatory	Performance tunning parameter controls Receive buffer size.
1.3.6.1.4.1.18.3.4.7.1.50	ColumnwfHssiMemPageLength	read-write	mandatory	Performance tunning parameter controls device memory access burst length.
1.3.6.1.4.1.18.3.4.7.1.51	ColumnwfHssiRxRingLength	read-write	mandatory	Performance tunning parameter controls the receive queue length. Receive Queue Length, values larger than the compiled ring size are truncated to the compiled …
1.3.6.1.4.1.18.3.4.7.1.52	ColumnwfHssiTxRingLength	read-write	mandatory	Performance tunning parameter controls the transmit queue length. Transmit Queue Length, values larger than the compiled ring size are truncated to the compile…
1.3.6.1.4.1.18.3.4.7.1.53	ColumnwfHssiRxFifoWatermark	read-write	mandatory	Performance tunning parameter controls the receive watermark.
1.3.6.1.4.1.18.3.4.7.1.54	ColumnwfHssiTxFifoWatermark	read-write	mandatory	Performance tunning parameter controls the transmit watermark.
1.3.6.1.4.1.18.3.4.7.1.55	ColumnwfHssiMaxRxMemory	read-write	mandatory	Performance tunning parameter controls fifo area allowed for receive.
1.3.6.1.4.1.18.3.4.7.1.56	ColumnwfHssiLinkInterface	read-write	mandatory	Only for DEBUG.
1.3.6.1.4.1.18.3.4.7.1.57	ColumnwfHssiTurboBofl	read-write	mandatory	Only for DEBUG, Turbo breath of life parameter
1.3.6.1.4.1.18.3.4.10	TablewfT1Table	not-accessible	mandatory	T1 line record
1.3.6.1.4.1.18.3.4.10.1	RowwfT1Entry	not-accessible	mandatory	An entry in the T1 table
1.3.6.1.4.1.18.3.4.10.1.1	ColumnwfT1Delete	read-write	mandatory	create/delete parameter, dflt = created
1.3.6.1.4.1.18.3.4.10.1.2	ColumnwfT1Disable	read-write	mandatory	enable/disable parameter, dflt = enabled
1.3.6.1.4.1.18.3.4.10.1.3	ColumnwfT1State	read-only	mandatory	line driver state variable, Not Present, Init, Up
1.3.6.1.4.1.18.3.4.10.1.4	ColumnwfT1Slot	read-only	mandatory	instance ID Slot, filled in by driver
1.3.6.1.4.1.18.3.4.10.1.5	ColumnwfT1Connector	read-only	mandatory	instance ID Connector, filled in by driver
1.3.6.1.4.1.18.3.4.10.1.6	ColumnwfT1Madr	read-only	mandatory	Line mac address, filled in by driver
1.3.6.1.4.1.18.3.4.10.1.7	ColumnwfT1FrameType	read-write	mandatory	Frame Type - differentiates between two tarrifed framing formats D4 and ESF.
1.3.6.1.4.1.18.3.4.10.1.8	ColumnwfT1LineBuildout	read-write	mandatory	Line Buildout - Approximate length of cable
1.3.6.1.4.1.18.3.4.10.1.9	ColumnwfT1B8ZSSupport	read-write	mandatory	B8ZS Support - Enables or disables Binary 8 zeros suppression
1.3.6.1.4.1.18.3.4.10.1.10	ColumnwfT1ClockMode	read-write	mandatory	Clock Mode - Specifies the source of the T1 transmit clock
1.3.6.1.4.1.18.3.4.10.1.11	ColumnwfT1MiniDacs	read-write	mandatory	MiniDacs Configuration - assigns each T1 channel to a specific function
1.3.6.1.4.1.18.3.4.10.1.12	ColumnwfT1BipolarVios	read-only	mandatory	Number of Bipolar Violations
1.3.6.1.4.1.18.3.4.10.1.13	ColumnwfT1FrameBitErrs	read-only	mandatory	Number of frame bit errors
1.3.6.1.4.1.18.3.4.10.1.14	ColumnwfT1OutOfFrameErrs	read-only	mandatory	Number of Out of Frame errors
1.3.6.1.4.1.18.3.4.10.1.15	ColumnwfT1SuperFrameErrs	read-only	mandatory	Number of Superframe errors
1.3.6.1.4.1.18.3.4.10.1.16	ColumnwfT1RcvYelAlarms	read-only	mandatory	Number of Yellow Alarms Received
1.3.6.1.4.1.18.3.4.10.1.17	ColumnwfT1RcvCarrierLoss	read-only	mandatory	Number of instances of carrier loss
1.3.6.1.4.1.18.3.4.10.1.18	ColumnwfT1RcvRedAlarms	read-only	mandatory	Number of Red Alarm Received
1.3.6.1.4.1.18.3.4.11	TablewfE1Table	not-accessible	mandatory	E1 line record
1.3.6.1.4.1.18.3.4.11.1	RowwfE1Entry	not-accessible	mandatory	An entry in the E1 table
1.3.6.1.4.1.18.3.4.11.1.1	ColumnwfE1Delete	read-write	mandatory	create/delete parameter, dflt = created
1.3.6.1.4.1.18.3.4.11.1.2	ColumnwfE1Disable	read-write	mandatory	enable/disable parameter, dflt = enabled
1.3.6.1.4.1.18.3.4.11.1.3	ColumnwfE1State	read-only	mandatory	line driver state variable, Not Present, Init, Up
1.3.6.1.4.1.18.3.4.11.1.4	ColumnwfE1Slot	read-only	mandatory	instance ID Slot, filled in by driver
1.3.6.1.4.1.18.3.4.11.1.5	ColumnwfE1Connector	read-only	mandatory	instance ID Connector, filled in by driver
1.3.6.1.4.1.18.3.4.11.1.6	ColumnwfE1Madr	read-only	mandatory	Line mac address, filled in by driver
1.3.6.1.4.1.18.3.4.11.1.7	ColumnwfE1HDB3Support	read-write	mandatory	HDB3 Support - Enables or disables high density bipolar coding
1.3.6.1.4.1.18.3.4.11.1.8	ColumnwfE1ClockMode	read-write	mandatory	Clock Mode - Specifies the source of the E1 transmit clock
1.3.6.1.4.1.18.3.4.11.1.9	ColumnwfE1MiniDacs	read-write	mandatory	MiniDacs Configuration - assigns each E1 channel to a specific function
1.3.6.1.4.1.18.3.4.11.1.10	ColumnwfE1BipolarVios	read-only	mandatory	Number of Bipolar Violations
1.3.6.1.4.1.18.3.4.11.1.11	ColumnwfE1FrameErrs	read-only	mandatory	Number of Frame errors
1.3.6.1.4.1.18.3.4.11.1.12	ColumnwfE1RcvRemAlms	read-only	mandatory	Number of remote alarms received
1.3.6.1.4.1.18.3.4.11.1.13	ColumnwfE1RcvMfmAlms	read-only	mandatory	Number of Multiframe Alarms Received
1.3.6.1.4.1.18.3.4.11.1.14	ColumnwfE1MfsErrs	read-only	mandatory	Number of instances of CAS Multiframe resync criteria met
1.3.6.1.4.1.18.3.4.11.1.15	ColumnwfE1SyncLoss	read-only	mandatory	Number of instances of sync loss
1.3.6.1.4.1.18.3.4.11.1.16	ColumnwfE1RcvSig1s	read-only	mandatory	Number of instances of receive signalling all 1's
1.3.6.1.4.1.18.3.4.11.1.17	ColumnwfE1RcvUnfrm1s	read-only	mandatory	Number of instances of Receive unframed all 1's
1.3.6.1.4.1.18.3.4.12	NodewfDs1Group
1.3.6.1.4.1.18.3.4.12.1	TablewfDs1Config	not-accessible	mandatory	The DS1 Configuration table
1.3.6.1.4.1.18.3.4.12.1.1	RowwfDs1ConfigEntry	not-accessible	mandatory	per circuit DS1 configuration objects; wfDs1LineIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.1.1.1	ColumnwfDs1LineIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.1.1.2	ColumnwfDs1TimeElapsed	read-only	mandatory	1..900 seconds within the current 15-minute interval
1.3.6.1.4.1.18.3.4.12.1.1.3	ColumnwfDs1ValidIntervals	read-only	mandatory	0..96 previous intervals that valid data were collected. This is 96 unless the CSU device was brought on line within the last 24 hours.
1.3.6.1.4.1.18.3.4.12.1.1.4	ColumnwfDs1LineType	read-only	mandatory	the variety of DS1 implementing this circuit
1.3.6.1.4.1.18.3.4.12.1.1.5	ColumnwfDs1ZeroCoding	read-only	mandatory	the variety of Zero Code Suppression used on the link
1.3.6.1.4.1.18.3.4.12.1.1.6	ColumnwfDs1SendCode	read-only	mandatory	the type of code being sent across the DS1 circuit by the CSU
1.3.6.1.4.1.18.3.4.12.1.1.7	ColumnwfDs1CircuitIdentifier	read-only	mandatory	the transmission vendor's circuit identifier
1.3.6.1.4.1.18.3.4.12.1.1.8	ColumnwfDs1LoopbackConfig	read-only	mandatory	the loopback state of the CSU
1.3.6.1.4.1.18.3.4.12.1.1.9	ColumnwfDs1LineStatus	read-only	mandatory	the state of the DS1 line
1.3.6.1.4.1.18.3.4.12.2	TablewfDs1Current	not-accessible	mandatory	The DS1 Current table
1.3.6.1.4.1.18.3.4.12.2.1	RowwfDs1CurrentEntry	not-accessible	mandatory	per circuit DS1 current objects - wfDs1CurrentIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.2.1.1	ColumnwfDs1CurrentIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.2.1.2	ColumnwfDs1CurrentESs	read-only	mandatory	the count of errored seconds in the current interval
1.3.6.1.4.1.18.3.4.12.2.1.3	ColumnwfDs1CurrentSESs	read-only	mandatory	the count of severely errored seconds in the current interval
1.3.6.1.4.1.18.3.4.12.2.1.4	ColumnwfDs1CurrentSEFs	read-only	mandatory	the count of severely errored framing seconds in the current interval
1.3.6.1.4.1.18.3.4.12.2.1.5	ColumnwfDs1CurrentUASs	read-only	mandatory	the number of unavailable seconds in the current interval
1.3.6.1.4.1.18.3.4.12.2.1.6	ColumnwfDs1CurrentBPVs	read-only	mandatory	the count of bipolar violations in the current interval
1.3.6.1.4.1.18.3.4.12.2.1.7	ColumnwfDs1CurrentCVs	read-only	mandatory	the count of code violation error events in the current interval
1.3.6.1.4.1.18.3.4.12.3	TablewfDs1Interval	not-accessible	mandatory	The DS1 Interval table
1.3.6.1.4.1.18.3.4.12.3.1	RowwfDs1IntervalEntry	not-accessible	mandatory	per circuit DS1 interval objects - wfDs1IntervalIndex corresponds to Wellfleet circuit number, wfDs1IntervalNumber is the numbered previous 15-minute interval
1.3.6.1.4.1.18.3.4.12.3.1.1	ColumnwfDs1IntervalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.3.1.2	ColumnwfDs1IntervalNumber	read-only	mandatory	1..96 where 1 is the most recent 15-minute interval and 96 is the least
1.3.6.1.4.1.18.3.4.12.3.1.3	ColumnwfDs1IntervalESs	read-only	mandatory	the count of errored seconds in the specified interval
1.3.6.1.4.1.18.3.4.12.3.1.4	ColumnwfDs1IntervalSESs	read-only	mandatory	the count of severely errored seconds in the specified interval
1.3.6.1.4.1.18.3.4.12.3.1.5	ColumnwfDs1IntervalSEFs	read-only	mandatory	the count of severely errored framing seconds in the specified interval
1.3.6.1.4.1.18.3.4.12.3.1.6	ColumnwfDs1IntervalUASs	read-only	mandatory	the number of unavailable seconds in the specified interval
1.3.6.1.4.1.18.3.4.12.3.1.7	ColumnwfDs1IntervalBPVs	read-only	mandatory	the count of bipolar violations in the specified interval
1.3.6.1.4.1.18.3.4.12.3.1.8	ColumnwfDs1IntervalCVs	read-only	mandatory	the count of code violation error events in the specified interval
1.3.6.1.4.1.18.3.4.12.4	TablewfDs1Total	not-accessible	mandatory	The DS1 Total table
1.3.6.1.4.1.18.3.4.12.4.1	RowwfDs1TotalEntry	not-accessible	mandatory	per circuit DS1 total objects - wfDs1TotalIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.4.1.1	ColumnwfDs1TotalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.4.1.2	ColumnwfDs1TotalESs	read-only	mandatory	total count of errored seconds
1.3.6.1.4.1.18.3.4.12.4.1.3	ColumnwfDs1TotalSESs	read-only	mandatory	total count of severely errored seconds
1.3.6.1.4.1.18.3.4.12.4.1.4	ColumnwfDs1TotalSEFs	read-only	mandatory	total count of severely errored framing seconds
1.3.6.1.4.1.18.3.4.12.4.1.5	ColumnwfDs1TotalUASs	read-only	mandatory	total number of unavailable seconds
1.3.6.1.4.1.18.3.4.12.4.1.6	ColumnwfDs1TotalBPVs	read-only	mandatory	total count of bipolar violations
1.3.6.1.4.1.18.3.4.12.4.1.7	ColumnwfDs1TotalCVs	read-only	mandatory	total count of code violation error events
1.3.6.1.4.1.18.3.4.12.5	TablewfDs1FeCurrent	not-accessible	mandatory	The DS1 Far End Current table
1.3.6.1.4.1.18.3.4.12.5.1	RowwfDs1FeCurrentEntry	not-accessible	mandatory	per circuit DS1 far end current objects wfDs1CurrentIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.5.1.1	ColumnwfDs1FeCurrentIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.5.1.2	ColumnwfDs1FeCurrentESs	read-only	mandatory	the count of errored seconds in the current interval
1.3.6.1.4.1.18.3.4.12.5.1.3	ColumnwfDs1FeCurrentSESs	read-only	mandatory	the count of severely errored seconds in the current interval
1.3.6.1.4.1.18.3.4.12.5.1.4	ColumnwfDs1FeCurrentSEFs	read-only	mandatory	the count of severely errored framing seconds in the current interval
1.3.6.1.4.1.18.3.4.12.5.1.5	ColumnwfDs1FeCurrentBPVs	read-only	mandatory	the count of bipolar violations in the current interval
1.3.6.1.4.1.18.3.4.12.5.1.6	ColumnwfDs1FeCurrentCVs	read-only	mandatory	the count of code violation error events in the current interval
1.3.6.1.4.1.18.3.4.12.6	TablewfDs1FeInterval	not-accessible	mandatory	The DS1 Far End Interval table
1.3.6.1.4.1.18.3.4.12.6.1	RowwfDs1FeIntervalEntry	not-accessible	mandatory	per circuit DS1 far end interval objects - wfDs1FeIntervalIndex corresponds to Wellfleet circuit number, wfDs1FeIntervalNumber is the numbered previous 15-minu…
1.3.6.1.4.1.18.3.4.12.6.1.1	ColumnwfDs1FeIntervalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.6.1.2	ColumnwfDs1FeIntervalNumber	read-only	mandatory	1..96 where 1 is the most recent 15-minute interval and 96 is the least
1.3.6.1.4.1.18.3.4.12.6.1.3	ColumnwfDs1FeIntervalESs	read-only	mandatory	the count of errored seconds in the specified interval
1.3.6.1.4.1.18.3.4.12.6.1.4	ColumnwfDs1FeIntervalSESs	read-only	mandatory	the count of severely errored seconds in the specified interval
1.3.6.1.4.1.18.3.4.12.6.1.5	ColumnwfDs1FeIntervalSEFs	read-only	mandatory	the count of severely errored framing seconds in the specified interval
1.3.6.1.4.1.18.3.4.12.6.1.6	ColumnwfDs1FeIntervalBPVs	read-only	mandatory	the count of bipolar violations in the specified interval
1.3.6.1.4.1.18.3.4.12.6.1.7	ColumnwfDs1FeIntervalCVs	read-only	mandatory	the count of code violation error events in the specified interval
1.3.6.1.4.1.18.3.4.12.7	TablewfDs1FeTotal	not-accessible	mandatory	The DS1 Far End Total table
1.3.6.1.4.1.18.3.4.12.7.1	RowwfDs1FeTotalEntry	not-accessible	mandatory	per circuit DS1 far end total objects - wfDs1FeTotalIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.7.1.1	ColumnwfDs1FeTotalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.12.7.1.2	ColumnwfDs1FeTotalESs	read-only	mandatory	total count of errored seconds
1.3.6.1.4.1.18.3.4.12.7.1.3	ColumnwfDs1FeTotalSESs	read-only	mandatory	total count of severely errored seconds
1.3.6.1.4.1.18.3.4.12.7.1.4	ColumnwfDs1FeTotalSEFs	read-only	mandatory	total count of severely errored framing seconds
1.3.6.1.4.1.18.3.4.12.7.1.5	ColumnwfDs1FeTotalBPVs	read-only	mandatory	total count of bipolar violations
1.3.6.1.4.1.18.3.4.12.7.1.6	ColumnwfDs1FeTotalCVs	read-only	mandatory	total count of code violation error events
1.3.6.1.4.1.18.3.4.13	NodewfDs3Group
1.3.6.1.4.1.18.3.4.13.1	TablewfDs3Config	not-accessible	mandatory	The DS3 Configuration table
1.3.6.1.4.1.18.3.4.13.1.1	RowwfDs3ConfigEntry	not-accessible	mandatory	per circuit DS3 configuration objects; wfDs3LineIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.1.1.1	ColumnwfDs3LineIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.1.1.2	ColumnwfDs3TimeElapsed	read-only	mandatory	1..900 seconds within the current 15-minute interval
1.3.6.1.4.1.18.3.4.13.1.1.3	ColumnwfDs3ValidIntervals	read-only	mandatory	0..96 previous intervals that valid data were collected. This is 96 unless the CSU device was brought on line within the last 24 hours.
1.3.6.1.4.1.18.3.4.13.1.1.4	ColumnwfDs3LineType	read-only	mandatory	the variety of DS3 implementing this circuit
1.3.6.1.4.1.18.3.4.13.1.1.5	ColumnwfDs3ZeroCoding	read-only	mandatory	the variety of Zero Code Suppression used on the link
1.3.6.1.4.1.18.3.4.13.1.1.6	ColumnwfDs3SendCode	read-only	mandatory	the type of code being sent across the DS3 circuit by the CSU
1.3.6.1.4.1.18.3.4.13.1.1.7	ColumnwfDs3CircuitIdentifier	read-only	mandatory	the transmission vendor's circuit identifier
1.3.6.1.4.1.18.3.4.13.1.1.8	ColumnwfDs3LoopbackConfig	read-only	mandatory	the loopback state of the CSU
1.3.6.1.4.1.18.3.4.13.1.1.9	ColumnwfDs3LineStatus	read-only	mandatory	the state of the DS3 line
1.3.6.1.4.1.18.3.4.13.2	TablewfDs3Current	not-accessible	mandatory	The DS3 Current table
1.3.6.1.4.1.18.3.4.13.2.1	RowwfDs3CurrentEntry	not-accessible	mandatory	per circuit DS3 current objects - wfDs3CurrentIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.2.1.1	ColumnwfDs3CurrentIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.2.1.2	ColumnwfDs3CurrentESs	read-only	mandatory	the count of errored seconds in the current interval
1.3.6.1.4.1.18.3.4.13.2.1.3	ColumnwfDs3CurrentSESs	read-only	mandatory	the count of severely errored seconds in the current interval
1.3.6.1.4.1.18.3.4.13.2.1.4	ColumnwfDs3CurrentSEFs	read-only	mandatory	the count of severely errored framing seconds in the current interval
1.3.6.1.4.1.18.3.4.13.2.1.5	ColumnwfDs3CurrentUASs	read-only	mandatory	the number of unavailable seconds in the current interval
1.3.6.1.4.1.18.3.4.13.2.1.6	ColumnwfDs3CurrentBPVs	read-only	mandatory	the count of bipolar violations in the current interval
1.3.6.1.4.1.18.3.4.13.2.1.7	ColumnwfDs3CurrentCVs	read-only	mandatory	the count of code violation error events in the current interval
1.3.6.1.4.1.18.3.4.13.3	TablewfDs3Interval	not-accessible	mandatory	The DS3 Interval table
1.3.6.1.4.1.18.3.4.13.3.1	RowwfDs3IntervalEntry	not-accessible	mandatory	per circuit DS3 interval objects - wfDs3IntervalIndex corresponds to Wellfleet circuit number, wfDs3IntervalNumber is the numbered previous 15-minute interval
1.3.6.1.4.1.18.3.4.13.3.1.1	ColumnwfDs3IntervalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.3.1.2	ColumnwfDs3IntervalNumber	read-only	mandatory	1..96 where 1 is the most recent 15-minute interval and 96 is the least
1.3.6.1.4.1.18.3.4.13.3.1.3	ColumnwfDs3IntervalESs	read-only	mandatory	the count of errored seconds in the specified interval
1.3.6.1.4.1.18.3.4.13.3.1.4	ColumnwfDs3IntervalSESs	read-only	mandatory	the count of severely errored seconds in the specified interval
1.3.6.1.4.1.18.3.4.13.3.1.5	ColumnwfDs3IntervalSEFs	read-only	mandatory	the count of severely errored framing seconds in the specified interval
1.3.6.1.4.1.18.3.4.13.3.1.6	ColumnwfDs3IntervalUASs	read-only	mandatory	the number of unavailable seconds in the specified interval
1.3.6.1.4.1.18.3.4.13.3.1.7	ColumnwfDs3IntervalBPVs	read-only	mandatory	the count of bipolar violations in the specified interval
1.3.6.1.4.1.18.3.4.13.3.1.8	ColumnwfDs3IntervalCVs	read-only	mandatory	the count of code violation error events in the specified interval
1.3.6.1.4.1.18.3.4.13.4	TablewfDs3Total	not-accessible	mandatory	The DS3 Total table
1.3.6.1.4.1.18.3.4.13.4.1	RowwfDs3TotalEntry	not-accessible	mandatory	per circuit DS3 total objects - wfDs3TotalIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.4.1.1	ColumnwfDs3TotalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.4.1.2	ColumnwfDs3TotalESs	read-only	mandatory	total count of errored seconds
1.3.6.1.4.1.18.3.4.13.4.1.3	ColumnwfDs3TotalSESs	read-only	mandatory	total count of severely errored seconds
1.3.6.1.4.1.18.3.4.13.4.1.4	ColumnwfDs3TotalSEFs	read-only	mandatory	total count of severely errored framing seconds
1.3.6.1.4.1.18.3.4.13.4.1.5	ColumnwfDs3TotalUASs	read-only	mandatory	total number of unavailable seconds
1.3.6.1.4.1.18.3.4.13.4.1.6	ColumnwfDs3TotalBPVs	read-only	mandatory	total count of bipolar violations
1.3.6.1.4.1.18.3.4.13.4.1.7	ColumnwfDs3TotalCVs	read-only	mandatory	total count of code violation error events
1.3.6.1.4.1.18.3.4.13.5	TablewfDs3FeConfig	not-accessible	mandatory	The DS3 Far End Configuration table
1.3.6.1.4.1.18.3.4.13.5.1	RowwfDs3FeConfigEntry	not-accessible	mandatory	per circuit DS3 far end config objects - wfDs3FeIntervalIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.5.1.1	ColumnwfDs3FeConfigIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.5.1.2	ColumnwfDs3FarEndEquipCode	read-write	mandatory	equipment description code - C-bit parity only
1.3.6.1.4.1.18.3.4.13.5.1.3	ColumnwfDs3FarEndLocationIDCode	read-write	mandatory	equipment location code - C-bit parity only
1.3.6.1.4.1.18.3.4.13.5.1.4	ColumnwfDs3FarEndFrameIDCode	read-write	mandatory	code for the equipment location within a building
1.3.6.1.4.1.18.3.4.13.5.1.5	ColumnwfDs3FarEndUnitCode	read-write	mandatory	code for the equipment location within a bay
1.3.6.1.4.1.18.3.4.13.5.1.6	ColumnwfDs3FarEndFacilityIDCode	read-write	mandatory	path identification code
1.3.6.1.4.1.18.3.4.13.6	TablewfDs3FeCurrent	not-accessible	mandatory	The DS3 Far End Current table
1.3.6.1.4.1.18.3.4.13.6.1	RowwfDs3FeCurrentEntry	not-accessible	mandatory	per circuit DS3 far end current objects wfDs3FeCurrentIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.6.1.1	ColumnwfDs3FeCurrentIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.6.1.2	ColumnwfDs3FeCurrentESs	read-only	mandatory	the count of errored seconds in the current interval
1.3.6.1.4.1.18.3.4.13.6.1.3	ColumnwfDs3FeCurrentSESs	read-only	mandatory	the count of severely errored seconds in the current interval
1.3.6.1.4.1.18.3.4.13.6.1.4	ColumnwfDs3FeCurrentCVs	read-only	mandatory	the count of code violation error events in the current interval
1.3.6.1.4.1.18.3.4.13.7	TablewfDs3FeInterval	not-accessible	mandatory	The DS3 Far End Interval table
1.3.6.1.4.1.18.3.4.13.7.1	RowwfDs3FeIntervalEntry	not-accessible	mandatory	per circuit DS3 far end interval objects - wfDs3FeIntervalIndex corresponds to Wellfleet circuit number, wfDs3FeIntervalNumber is the numbered previous 15-minu…
1.3.6.1.4.1.18.3.4.13.7.1.1	ColumnwfDs3FeIntervalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.7.1.2	ColumnwfDs3FeIntervalNumber	read-only	mandatory	1..96 where 1 is the most recent 15-minute interval and 96 is the least
1.3.6.1.4.1.18.3.4.13.7.1.3	ColumnwfDs3FeIntervalESs	read-only	mandatory	the count of errored seconds in the specified interval
1.3.6.1.4.1.18.3.4.13.7.1.4	ColumnwfDs3FeIntervalSESs	read-only	mandatory	the count of severely errored seconds in the specified interval
1.3.6.1.4.1.18.3.4.13.7.1.5	ColumnwfDs3FeIntervalCVs	read-only	mandatory	the count of code violation error events in the specified interval
1.3.6.1.4.1.18.3.4.13.8	TablewfDs3FeTotal	not-accessible	mandatory	The DS3 Far End Total table
1.3.6.1.4.1.18.3.4.13.8.1	RowwfDs3FeTotalEntry	not-accessible	mandatory	per circuit far end DS3 total objects - wfDs3FeTotalIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.8.1.1	ColumnwfDs3FeTotalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.13.8.1.2	ColumnwfDs3FeTotalESs	read-only	mandatory	total count of errored seconds
1.3.6.1.4.1.18.3.4.13.8.1.3	ColumnwfDs3FeTotalSESs	read-only	mandatory	total count of severely errored seconds
1.3.6.1.4.1.18.3.4.13.8.1.4	ColumnwfDs3FeTotalCVs	read-only	mandatory	total count of code violation error events
1.3.6.1.4.1.18.3.4.14	NodewfSipGroup
1.3.6.1.4.1.18.3.4.14.1	TablewfSipL2	not-accessible	mandatory	The SIP L2 Table
1.3.6.1.4.1.18.3.4.14.1.1	RowwfSipL2Entry	not-accessible	mandatory	per circuit SIP Level 2 objects - wfSipL2Index corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.14.1.1.1	ColumnwfSipL2Index	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.14.1.1.2	ColumnwfSipL2ReceivedCounts	read-only	mandatory	total of unerrored received SIP L2 PDUs
1.3.6.1.4.1.18.3.4.14.1.1.3	ColumnwfSipL2SentCounts	read-only	mandatory	total of unerrored SIP L2 PDU's sent across the SNI
1.3.6.1.4.1.18.3.4.14.1.1.4	ColumnwfSipHcsOrCRCErrors	read-only	mandatory	total SIP L2 PDUs with HCS or CRC errors
1.3.6.1.4.1.18.3.4.14.1.1.5	ColumnwfSipL2PayloadLengthErrors	read-only	mandatory	total SIP L2 PDUs with length errors
1.3.6.1.4.1.18.3.4.14.1.1.6	ColumnwfSipL2SequenceNumberErrors	read-only	mandatory	total SIP L2 PDUs with unexpected sequence numbers
1.3.6.1.4.1.18.3.4.14.1.1.7	ColumnwfSipL2MidCurrentlyActiveErrors	read-only	mandatory	number of SIP L2 PDUs with BOMs previously started
1.3.6.1.4.1.18.3.4.14.1.1.8	ColumnwfSipL2BomOrSSMsMIDErrors	read-only	mandatory	number of SIP L2 PDUs with zero BOMs or SSMs not zero
1.3.6.1.4.1.18.3.4.14.1.1.9	ColumnwfSipL2EomsMIDErrors	read-only	mandatory	number of SIP L2 PDUs with zero EOMs or EOMs without BOMs
1.3.6.1.4.1.18.3.4.14.2	NodewfSipPlcpGroup
1.3.6.1.4.1.18.3.4.14.2.1	TablewfSipDs1Plcp	not-accessible	mandatory	The SIP DS1 PLCP Table
1.3.6.1.4.1.18.3.4.14.2.1.1	RowwfSipDs1PlcpEntry	not-accessible	mandatory	per circuit DS1 PLCP objects - wfSipDs1PlcpIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.14.2.1.1.1	ColumnwfSipDs1PlcpIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.14.2.1.1.2	ColumnwfSipDs1PlcpSEFs	read-only	mandatory	number of second intervals containing one or more severely errored seconds
1.3.6.1.4.1.18.3.4.14.2.1.1.3	ColumnwfSipDs1PlcpAlarmState	read-only	mandatory	alarm state
1.3.6.1.4.1.18.3.4.14.2.1.1.4	ColumnwfSipDs1PlcpUASs	read-only	mandatory	number of second intervals containing one or more unavailable seconds
1.3.6.1.4.1.18.3.4.14.2.2	TablewfSipDs3Plcp	not-accessible	mandatory	The SIP DS3 PLCP Table
1.3.6.1.4.1.18.3.4.14.2.2.1	RowwfSipDs3PlcpEntry	not-accessible	mandatory	per circuit DS3 PLCP objects - wfSipDs3PlcpIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.14.2.2.1.1	ColumnwfSipDs3PlcpIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.14.2.2.1.2	ColumnwfSipDs3PlcpSEFs	read-only	mandatory	number of second intervals containing one or more severely errored seconds
1.3.6.1.4.1.18.3.4.14.2.2.1.3	ColumnwfSipDs3PlcpAlarmState	read-only	mandatory	alarm state
1.3.6.1.4.1.18.3.4.14.2.2.1.4	ColumnwfSipDs3PlcpUASs	read-only	mandatory	number of second intervals containing one or more unavailable seconds
1.3.6.1.4.1.18.3.4.15	NodewfFddiGroup
1.3.6.1.4.1.18.3.4.15.1	NodewfFddiSmtGroup
1.3.6.1.4.1.18.3.4.15.1.2	TablewfFddiSmtTable	not-accessible	mandatory	A list of SMT entries.
1.3.6.1.4.1.18.3.4.15.1.2.1	RowwfFddiSmtEntry	not-accessible	mandatory	An SMT entry containing information common to a given SMT.
1.3.6.1.4.1.18.3.4.15.1.2.1.1	ColumnwfFddiSmtSlot	read-only	mandatory	Slot number associated with an SMT entity.
1.3.6.1.4.1.18.3.4.15.1.2.1.2	ColumnwfFddiSmtNode	read-only	mandatory	Node/connector number associated with an SMT entity.
1.3.6.1.4.1.18.3.4.15.1.2.1.3	ColumnwfFddiSmtCct	read-only	mandatory	Circuit number associated with an SMT entity.
1.3.6.1.4.1.18.3.4.15.1.2.1.4	ColumnwfFddiSmtStationId	read-only	mandatory	Unique identifier of an FDDI station.
1.3.6.1.4.1.18.3.4.15.1.2.1.5	ColumnwfFddiSmtOpVersionId	read-only	mandatory	The version that this station is using for its operation.
1.3.6.1.4.1.18.3.4.15.1.2.1.6	ColumnwfFddiSmtMacCt	read-only	mandatory	The number of MACs in the station or concentrator.
1.3.6.1.4.1.18.3.4.15.1.2.1.7	ColumnwfFddiSmtNonMasterCt	read-only	mandatory	The number of Non Master PORTs (A, B, or S PORTs) in the station or concentrator.
1.3.6.1.4.1.18.3.4.15.1.2.1.8	ColumnwfFddiSmtEcmState	read-only	mandatory	Indicates the current state of the ECM state machine.
1.3.6.1.4.1.18.3.4.15.1.2.1.9	ColumnwfFddiSmtCfState	read-only	mandatory	The attachment configuration for the station or concentrator.
1.3.6.1.4.1.18.3.4.15.2	NodewfFddiMacGroup
1.3.6.1.4.1.18.3.4.15.2.2	TablewfFddiMacTable	not-accessible	mandatory	A list of MAC entries.
1.3.6.1.4.1.18.3.4.15.2.2.1	RowwfFddiMacEntry	not-accessible	mandatory	A MAC entry containing information common to a given MAC.
1.3.6.1.4.1.18.3.4.15.2.2.1.1	ColumnwfFddiMacSlot	read-only	mandatory	Slot number associated with a MAC entity.
1.3.6.1.4.1.18.3.4.15.2.2.1.2	ColumnwfFddiMacNode	read-only	mandatory	Node/connector number associated with a MAC entity.
1.3.6.1.4.1.18.3.4.15.2.2.1.3	ColumnwfFddiMacCct	read-only	mandatory	Circuit number associated with a MAC entity.
1.3.6.1.4.1.18.3.4.15.2.2.1.4	ColumnwfFddiMacUpstreamNbr	read-only	mandatory	The MAC's upstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol. The value shall be reported as '00 …
1.3.6.1.4.1.18.3.4.15.2.2.1.5	ColumnwfFddiMacDownstreamNbr	read-only	mandatory	The MAC's downstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol. The value shall be reported as '0…
1.3.6.1.4.1.18.3.4.15.2.2.1.6	ColumnwfFddiMacSmtAddress	read-only	mandatory	The 48 bit individual address of the MAC used for SMT frames.
1.3.6.1.4.1.18.3.4.15.2.2.1.7	ColumnwfFddiMacTNeg	read-only	mandatory	The negotiated TTRT during the claim process represented in unsigned integer specifying time in octet units (80 nanosecond).
1.3.6.1.4.1.18.3.4.15.2.2.1.8	ColumnwfFddiMacRmtState	read-only	mandatory	Indicates the current state of the Ring Management state machine.
1.3.6.1.4.1.18.3.4.15.3	NodewfFddiPathGroup
1.3.6.1.4.1.18.3.4.15.4	NodewfFddiPortGroup
1.3.6.1.4.1.18.3.4.15.4.2	TablewfFddiPortTable	not-accessible	mandatory	A list of PORT entries. The number of entries is given by the value of wfFddiPortNumber.
1.3.6.1.4.1.18.3.4.15.4.2.1	RowwfFddiPortEntry	not-accessible	mandatory	A PORT entry containing information common to a given PORT.
1.3.6.1.4.1.18.3.4.15.4.2.1.1	ColumnwfFddiPortSlot	read-only	mandatory	Slot number associated with a PORT entity.
1.3.6.1.4.1.18.3.4.15.4.2.1.2	ColumnwfFddiPortNode	read-only	mandatory	Node/connector number associated with a PORT entity.
1.3.6.1.4.1.18.3.4.15.4.2.1.3	ColumnwfFddiPortCct	read-only	mandatory	Circuit number associated with a PORT entity.
1.3.6.1.4.1.18.3.4.15.4.2.1.4	ColumnwfFddiPortIndex	read-only	mandatory	A unique value for each PORT associated with each slot/connector pair.
1.3.6.1.4.1.18.3.4.15.4.2.1.5	ColumnwfFddiPortPcType	read-only	mandatory	PC_Type.
1.3.6.1.4.1.18.3.4.15.4.2.1.6	ColumnwfFddiPortPcNeighbor	read-only	mandatory	The type (PC_Neighbor) of the remote PORT that is determined in PC_Signaling in R_Val (1,2).
1.3.6.1.4.1.18.3.4.15.4.2.1.7	ColumnwfFddiPortPcmState	read-only	mandatory	State of Physical State Machine.
1.3.6.1.4.1.18.3.5	NodewfApplication
1.3.6.1.4.1.18.3.5.1	NodewfDataLink
1.3.6.1.4.1.18.3.5.1.1	NodewfBridgeGroup
1.3.6.1.4.1.18.3.5.1.1.1	NodewfBrLearning
1.3.6.1.4.1.18.3.5.1.1.1.1	NodewfBrTp
1.3.6.1.4.1.18.3.5.1.1.1.1.1	ScalarwfBrTpBaseDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the bridge.
1.3.6.1.4.1.18.3.5.1.1.1.1.2	ScalarwfBrTpBaseEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable the bridge.
1.3.6.1.4.1.18.3.5.1.1.1.1.3	ScalarwfBrTpBaseState	read-only	mandatory	The current state of the entire Bridge.
1.3.6.1.4.1.18.3.5.1.1.1.2	TablewfBrTpFdbTable	not-accessible	mandatory	A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans…
1.3.6.1.4.1.18.3.5.1.1.1.2.1	RowwfBrTpFdbEntry	not-accessible	mandatory	An entry in the wfBrTpFdbTable.
1.3.6.1.4.1.18.3.5.1.1.1.2.1.1	ColumnwfBrTpBaseFdbAddress	read-only	mandatory	A unicast MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.18.3.5.1.1.1.2.1.2	ColumnwfBrTpBaseFdbPort	read-only	mandatory	The port number on which the wfBrTpBaseFdbAddress was learned.
1.3.6.1.4.1.18.3.5.1.1.1.2.1.3	ColumnwfBrTpBaseFdbStatus	read-only	mandatory	The status of this entry. The meanings of the values are: learned(3) : the value of the corresponding instance of wfBrTpFdbPort was learned, and is being used.
1.3.6.1.4.1.18.3.5.1.1.2	NodewfBrSourceRouting
1.3.6.1.4.1.18.3.5.1.1.2.1	NodewfBrSr
1.3.6.1.4.1.18.3.5.1.1.2.1.1	ScalarwfBrSrBaseDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the bridge.
1.3.6.1.4.1.18.3.5.1.1.2.1.2	ScalarwfBrSrBaseDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable the bridge.
1.3.6.1.4.1.18.3.5.1.1.2.1.3	ScalarwfBrSrBaseState	read-only	mandatory	The current state of the SR bridge.
1.3.6.1.4.1.18.3.5.1.1.2.1.4	ScalarwfBrSrBaseInternalLanId	read-write	mandatory	The SR bridge internal LAN ID
1.3.6.1.4.1.18.3.5.1.1.2.1.5	ScalarwfBrSrBaseBridgeId	read-write	mandatory	The SR bridge Id
1.3.6.1.4.1.18.3.5.1.1.2.1.6	ScalarwfBrSrBaseGroupLanId	read-write	mandatory	The SR bridge Group LAN ID
1.3.6.1.4.1.18.3.5.1.1.2.1.7	ScalarwfBrSrBaseIpEncapsDisable	read-write	mandatory	IP Encapsulation Enable/Disable
1.3.6.1.4.1.18.3.5.1.1.2.1.8	ScalarwfBrSrBaseIpNetworkRingId	read-write	mandatory	The ring number of a connected IP network
1.3.6.1.4.1.18.3.5.1.1.2.1.9	ScalarwfBrSrBaseIpInReceives	read-only	mandatory	The number IP frames received by the network
1.3.6.1.4.1.18.3.5.1.1.2.1.10	ScalarwfBrSrBaseIpSeqErrors	read-only	mandatory	The number IP frames received by the network
1.3.6.1.4.1.18.3.5.1.1.2.1.11	ScalarwfBrSrBaseIpMtuSize	read-write	mandatory	to the LF code in the Route Control field
1.3.6.1.4.1.18.3.5.1.1.2.2	TablewfBrSrInterfaceTable	not-accessible	mandatory	A table that contains information about every interface that is associated with this source routing bridge. inst_id[1] = wfBrSrInterfaceCircuit
1.3.6.1.4.1.18.3.5.1.1.2.2.1	RowwfBrSrInterfaceEntry	not-accessible	mandatory	An entry in wfBrSrInterface.
1.3.6.1.4.1.18.3.5.1.1.2.2.1.1	ColumnwfBrSrInterfaceDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an interface.
1.3.6.1.4.1.18.3.5.1.1.2.2.1.2	ColumnwfBrSrInterfaceDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an interface.
1.3.6.1.4.1.18.3.5.1.1.2.2.1.3	ColumnwfBrSrInterfaceState	read-only	mandatory	The current state of the interface.
1.3.6.1.4.1.18.3.5.1.1.2.2.1.4	ColumnwfBrSrInterfaceCircuit	read-only	mandatory	The circuit that this interface runs over.
1.3.6.1.4.1.18.3.5.1.1.2.2.1.5	ColumnwfBrSrInterfaceMaxRds	read-write	mandatory	The maximum number of RDs permitted in incoming explorer frames
1.3.6.1.4.1.18.3.5.1.1.2.2.1.6	ColumnwfBrSrInterfaceRing	read-write	mandatory	The ring number of the source routing circuit. Even non-ring circuit need a ring number if it is to do source routing
1.3.6.1.4.1.18.3.5.1.1.2.2.1.7	ColumnwfBrSrInterfaceBlockOutSte	read-write	mandatory	Enables blocking of outbound STEs
1.3.6.1.4.1.18.3.5.1.1.2.2.1.8	ColumnwfBrSrInterfaceBlockInSte	read-write	mandatory	Enables blocking of inbound STEs
1.3.6.1.4.1.18.3.5.1.1.2.2.1.9	ColumnwfBrSrInterfaceBlockIp	read-write	mandatory	Enables blocking of inbound explorers that have have already been through the IP network
1.3.6.1.4.1.18.3.5.1.1.2.2.1.10	ColumnwfBrSrInterfaceIpAddress	read-write	mandatory	Ip address for this ring. This should match the the IP address in the IP MIB
1.3.6.1.4.1.18.3.5.1.1.2.2.1.11	ColumnwfBrSrInterfaceInFrames	read-only	mandatory	The number of frames that have been received by this interface from its circuit.
1.3.6.1.4.1.18.3.5.1.1.2.2.1.12	ColumnwfBrSrInterfaceOutFrames	read-only	mandatory	The number of frames that have been transmitted by this interface
1.3.6.1.4.1.18.3.5.1.1.2.2.1.13	ColumnwfBrSrInterfaceOutIpFrames	read-only	mandatory	The number of frames that have been transmitted by this interface to the IP network
1.3.6.1.4.1.18.3.5.1.1.2.2.1.14	ColumnwfBrSrInterfaceDropInvalidRcs	read-only	mandatory	Count of frames received which were discarded because of a bad Route Control field
1.3.6.1.4.1.18.3.5.1.1.2.2.1.15	ColumnwfBrSrInterfaceDropInvalidRings	read-only	mandatory	Count of frames received which were discarded because of a invalid incoming ring
1.3.6.1.4.1.18.3.5.1.1.2.2.1.16	ColumnwfBrSrInterfaceDropSrfs	read-only	mandatory	Count of specifically routed frames received which were discarded due to filtering or no next circuit
1.3.6.1.4.1.18.3.5.1.1.2.3	TablewfBrSrBridgeTable	not-accessible	mandatory	A table that contains the bridge numbers used by Wellfleet bridges in a source routing network inst_id[2] = wfBrSrBridgeId
1.3.6.1.4.1.18.3.5.1.1.2.3.1	RowwfBrSrBridgeEntry	not-accessible	mandatory	An entry in wfBrSrBridge.
1.3.6.1.4.1.18.3.5.1.1.2.3.1.1	ColumnwfBrSrBridgeDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an IP encapsulation peer record.
1.3.6.1.4.1.18.3.5.1.1.2.3.1.2	ColumnwfBrSrBridgeId	read-only	mandatory	The Bridge Id reserved for Wellfleet bridges
1.3.6.1.4.1.18.3.5.1.1.2.4	TablewfBrSrIpExplorerTable	not-accessible	mandatory	A table that contains the table of IP addresses to which source routing explorers should be sent inst_id[2] = wfBrSrIpExplorerAddress
1.3.6.1.4.1.18.3.5.1.1.2.4.1	RowwfBrSrIpExplorerEntry	not-accessible	mandatory	An entry in wfBrSrIpExplorer.
1.3.6.1.4.1.18.3.5.1.1.2.4.1.1	ColumnwfBrSrIpExplorerDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an IP encapsulation peer record.
1.3.6.1.4.1.18.3.5.1.1.2.4.1.2	ColumnwfBrSrIpExplorerAddr	read-only	mandatory	The IP address of this encapsulation peer.
1.3.6.1.4.1.18.3.5.1.1.2.5	TablewfBrSrIpEncapsTable	not-accessible	mandatory	A table that contains information about IP Encapsulation ring-to-IP Address mappings. This information is used to make the 'next ring' IP Address decision. ins…
1.3.6.1.4.1.18.3.5.1.1.2.5.1	RowwfBrSrIpEncapsEntry	not-accessible	mandatory	An entry in the wfBrSrIpEncapsTable.
1.3.6.1.4.1.18.3.5.1.1.2.5.1.1	ColumnwfBrSrIpEncapsRing	read-only	mandatory	The remote ring number for which we have a ring to IP Address mapping.
1.3.6.1.4.1.18.3.5.1.1.2.5.1.2	ColumnwfBrSrIpEncapsIpAddress	read-only	mandatory	The IP Address of the Wellfleet IP Encapsulation peer to which this ring is connected.
1.3.6.1.4.1.18.3.5.1.1.2.5.1.3	ColumnwfBrSrIpEncapsStatus	read-only	mandatory	The status of this entry. The meanings of the values are: learned(3) : the value of the corresponding instance of wfBrSrIpEncapsRing was learned, and is being …
1.3.6.1.4.1.18.3.5.1.1.2.6	TablewfBrSrTrafficFilterTable	not-accessible	mandatory	SR Bridge Traffic Filters
1.3.6.1.4.1.18.3.5.1.1.2.6.1	RowwfBrSrTrafficFilterEntry	not-accessible	mandatory	An entry in WfBrSrTrafficFilterTable.
1.3.6.1.4.1.18.3.5.1.1.2.6.1.1	ColumnwfBrSrTrafficFilterCreate	read-write	mandatory	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
1.3.6.1.4.1.18.3.5.1.1.2.6.1.2	ColumnwfBrSrTrafficFilterEnable	read-write	mandatory	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
1.3.6.1.4.1.18.3.5.1.1.2.6.1.3	ColumnwfBrSrTrafficFilterStatus	read-only	mandatory	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error…
1.3.6.1.4.1.18.3.5.1.1.2.6.1.4	ColumnwfBrSrTrafficFilterCounter	read-only	mandatory	The number of received packets that have matched this rule.
1.3.6.1.4.1.18.3.5.1.1.2.6.1.5	ColumnwfBrSrTrafficFilterDefinition	read-write	mandatory	The filter rule definition.
1.3.6.1.4.1.18.3.5.1.1.2.6.1.6	ColumnwfBrSrTrafficFilterReserved	not-accessible	mandatory	Reserved field.
1.3.6.1.4.1.18.3.5.1.1.2.6.1.7	ColumnwfBrSrTrafficFilterCircuit	read-only	mandatory	The ID of the Bridge Circuit to which the filter is applied.
1.3.6.1.4.1.18.3.5.1.1.2.6.1.8	ColumnwfBrSrTrafficFilterRuleNumber	read-only	mandatory	ID for the rule.
1.3.6.1.4.1.18.3.5.1.1.2.6.1.9	ColumnwfBrSrTrafficFilterFragment	read-only	mandatory	Fragment number - for large rules.
1.3.6.1.4.1.18.3.5.1.1.2.7	TablewfBrSrEsRifTable	not-accessible	mandatory	A table that contains the currently active RIFs in use by Router End Station Support inst_id[9] = wfBrSrIpExplorerAddress
1.3.6.1.4.1.18.3.5.1.1.2.7.1	RowwfBrSrEsRifEntry	not-accessible	mandatory	An entry in wfBrSrEsRif.
1.3.6.1.4.1.18.3.5.1.1.2.7.1.1	ColumnwfBrSrEsRifCircuit	read-only	mandatory	The circuit on which this entry was learned
1.3.6.1.4.1.18.3.5.1.1.2.7.1.2	ColumnwfBrSrEsRifProtocol	read-only	mandatory	protocol type.
1.3.6.1.4.1.18.3.5.1.1.2.7.1.3	ColumnwfBrSrEsRifMacAddr	read-only	mandatory	to this RIF.
1.3.6.1.4.1.18.3.5.1.1.2.7.1.4	ColumnwfBrSrEsRifRoute	read-only	mandatory	The route contained in the RIF field
1.3.6.1.4.1.18.3.5.1.1.3	TablewfBrTpInterface	not-accessible	mandatory	A table that contains information about every interface that is associated with this transparent bridge. inst_id[1] = wfBrTpInterfaceCircuit
1.3.6.1.4.1.18.3.5.1.1.3.1	RowwfBrTpInterfaceEntry	not-accessible	mandatory	An entry in wfBrTpInterface.
1.3.6.1.4.1.18.3.5.1.1.3.1.1	ColumnwfBrTpInterfaceDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an interface.
1.3.6.1.4.1.18.3.5.1.1.3.1.2	ColumnwfBrTpInterfaceEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an interface.
1.3.6.1.4.1.18.3.5.1.1.3.1.3	ColumnwfBrTpInterfaceState	read-only	mandatory	The current state of the interface.
1.3.6.1.4.1.18.3.5.1.1.3.1.4	ColumnwfBrTpInterfaceCircuit	read-only	mandatory	The circuit that this interface runs over.
1.3.6.1.4.1.18.3.5.1.1.3.1.5	ColumnwfBrTpInterfaceMaxInfo	read-only	mandatory	The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
1.3.6.1.4.1.18.3.5.1.1.3.1.6	ColumnwfBrTpInterfaceInFrames	read-only	mandatory	The number of frames that have been received by this interface from its circuit.
1.3.6.1.4.1.18.3.5.1.1.3.1.7	ColumnwfBrTpInterfaceOutFrames	read-only	mandatory	The number of frames that have been transmitted by this interface to its circuit.
1.3.6.1.4.1.18.3.5.1.1.3.1.8	ColumnwfBrTpInterfaceInDiscards	read-only	mandatory	Count of valid frames received which were received on this interface but then discarded.
1.3.6.1.4.1.18.3.5.1.1.4	TablewfBrTrafficFilterTable	not-accessible	mandatory	Bridge Traffic Filters
1.3.6.1.4.1.18.3.5.1.1.4.1	RowwfBrTrafficFilterEntry	not-accessible	mandatory	An entry in WfBrTrafficFilterTable.
1.3.6.1.4.1.18.3.5.1.1.4.1.1	ColumnwfBrTrafficFilterCreate	read-write	mandatory	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
1.3.6.1.4.1.18.3.5.1.1.4.1.2	ColumnwfBrTrafficFilterEnable	read-write	mandatory	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
1.3.6.1.4.1.18.3.5.1.1.4.1.3	ColumnwfBrTrafficFilterStatus	read-only	mandatory	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error…
1.3.6.1.4.1.18.3.5.1.1.4.1.4	ColumnwfBrTrafficFilterCounter	read-only	mandatory	The number of received packets that have matched this rule.
1.3.6.1.4.1.18.3.5.1.1.4.1.5	ColumnwfBrTrafficFilterDefinition	read-write	mandatory	The filter rule definition.
1.3.6.1.4.1.18.3.5.1.1.4.1.6	ColumnwfBrTrafficFilterReserved	not-accessible	mandatory	Reserved field.
1.3.6.1.4.1.18.3.5.1.1.4.1.7	ColumnwfBrTrafficFilterCircuit	read-only	mandatory	The ID of the Bridge Circuit to which the filter is applied.
1.3.6.1.4.1.18.3.5.1.1.4.1.8	ColumnwfBrTrafficFilterRuleNumber	read-only	mandatory	ID for the rule.
1.3.6.1.4.1.18.3.5.1.1.4.1.9	ColumnwfBrTrafficFilterFragment	read-only	mandatory	Fragment number - for large rules.
1.3.6.1.4.1.18.3.5.1.2	NodewfSpanningTree
1.3.6.1.4.1.18.3.5.1.2.1	NodewfBrStp
1.3.6.1.4.1.18.3.5.1.2.1.1	ScalarwfBrStpBaseDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the Spanning tree.
1.3.6.1.4.1.18.3.5.1.2.1.2	ScalarwfBrStpBaseEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable the spanning tree.
1.3.6.1.4.1.18.3.5.1.2.1.3	ScalarwfBrStpBaseState	read-only	mandatory	The current state of the spanning tree.
1.3.6.1.4.1.18.3.5.1.2.1.4	ScalarwfBrStpProtocolSpecification	read-only	mandatory	The version of the Spanning Tree protocol being run.
1.3.6.1.4.1.18.3.5.1.2.1.5	ScalarwfBrStpBridgeID	read-write	mandatory	The Spanning Tree Bridge ID assigned to this bridge. It is a 8-octet string. The first two octets make up the bridge priority, and the last six are the MAC add…
1.3.6.1.4.1.18.3.5.1.2.1.6	ScalarwfBrStpTimeSinceTopologyChange	read-only	mandatory	The time (in hundredths of a second) since the last topology change was detected by the bridge.
1.3.6.1.4.1.18.3.5.1.2.1.7	ScalarwfBrStpTopChanges	read-only	mandatory	The total number of topology changes detected by this bridge since it was last reset or initialized
1.3.6.1.4.1.18.3.5.1.2.1.8	ScalarwfBrStpDesignatedRoot	read-only	mandatory	The bridge ID of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by the bridge. This value is used as the Root Identifier…
1.3.6.1.4.1.18.3.5.1.2.1.9	ScalarwfBrStpRootCost	read-only	mandatory	The cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.18.3.5.1.2.1.10	ScalarwfBrStpRootPort	read-only	mandatory	The port identifier of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.18.3.5.1.2.1.11	ScalarwfBrStpMaxAge	read-only	mandatory	The maximum age of the Spanning Tree Protocol information learned from the network on any port before it is discarded, in hundredths of a second. This represen…
1.3.6.1.4.1.18.3.5.1.2.1.12	ScalarwfBrStpHelloTime	read-only	mandatory	The amount of time between transmission of configuration BPDUs by this bridge on any port, when it is the root of the spanning tree or trying to become so, in …
1.3.6.1.4.1.18.3.5.1.2.1.13	ScalarwfBrStpHoldTime	read-only	mandatory	The value that determines the interval length during which no more than two configuration BPDUs shall be transmitted by this bridge, in hundredths of a second.
1.3.6.1.4.1.18.3.5.1.2.1.14	ScalarwfBrStpForwardDelay	read-only	mandatory	The time, in hundredths of a second, that a port on this bridge will stay in a transitional state (e.g. LISTENING) before moving to the next state (e.g. LEARNI…
1.3.6.1.4.1.18.3.5.1.2.1.15	ScalarwfBrStpBridgeMaxAge	read-write	mandatory	The value that all bridges use for MaxAge when this bridge acting as the root.
1.3.6.1.4.1.18.3.5.1.2.1.16	ScalarwfBrStpBridgeHelloTime	read-write	mandatory	The value that all bridges use for HelloTime when this bridge acting as the root.
1.3.6.1.4.1.18.3.5.1.2.1.17	ScalarwfBrStpBridgeForwardDelay	read-write	mandatory	The value that all bridges use for ForwardDelay when this bridge acting as the root.
1.3.6.1.4.1.18.3.5.1.2.2	TablewfBrStpInterface	not-accessible	mandatory	inst_id[1] = wfBrStpInterfaceCircuit
1.3.6.1.4.1.18.3.5.1.2.2.1	RowwfBrStpInterfaceEntry	not-accessible	mandatory	An entry in wfBrStpInterface.
1.3.6.1.4.1.18.3.5.1.2.2.1.1	ColumnwfBrStpInterfaceDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an interface for the Spanning Tree.
1.3.6.1.4.1.18.3.5.1.2.2.1.2	ColumnwfBrStpInterfaceEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an interface for the Spanning Tree.
1.3.6.1.4.1.18.3.5.1.2.2.1.3	ColumnwfBrStpInterfaceCircuit	read-only	mandatory	The circuit number on which this interface is defined.
1.3.6.1.4.1.18.3.5.1.2.2.1.4	ColumnwfBrStpInterfacePriority	read-write	mandatory	The value of the priority field which is contained in the first octet of the (2 octet long) port ID for this circuit. The other octet of the port ID is given b…
1.3.6.1.4.1.18.3.5.1.2.2.1.5	ColumnwfBrStpInterfaceState	read-only	mandatory	The current state of the port as defined by the application of the Spanning Tree Protocol.
1.3.6.1.4.1.18.3.5.1.2.2.1.6	ColumnwfBrStpInterfaceMultiCastAddr	read-only	mandatory	The MAC address used as the destination for all BPDU packets generated out this port.
1.3.6.1.4.1.18.3.5.1.2.2.1.7	ColumnwfBrStpInterfacePathCost	read-write	mandatory	The contribution of this port the the root path cost of paths toward the spanning tree root which include this port.
1.3.6.1.4.1.18.3.5.1.2.2.1.8	ColumnwfBrStpInterfaceDesignatedRoot	read-only	mandatory	The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which this p…
1.3.6.1.4.1.18.3.5.1.2.2.1.9	ColumnwfBrStpInterfaceDesignatedCost	read-only	mandatory	The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.18.3.5.1.2.2.1.10	ColumnwfBrStpInterfaceDesignatedBridge	read-only	mandatory	The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.18.3.5.1.2.2.1.11	ColumnwfBrStpInterfaceDesignatedPort	read-only	mandatory	The Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.18.3.5.1.2.2.1.12	ColumnwfBrStpInterfaceForwardTransitions	read-only	mandatory	The number of times this port has transitioned from the Learning State to the Forwarding state.
1.3.6.1.4.1.18.3.5.1.2.2.1.13	ColumnwfBrStpInterfacePktsXmitd	read-only	mandatory	The number of BPDU packets transmitted out this port
1.3.6.1.4.1.18.3.5.1.2.2.1.14	ColumnwfBrStpInterfacePktsRcvd	read-only	mandatory	The number of BPDU packets received on this port
1.3.6.1.4.1.18.3.5.1.3	NodewfIfGroup
1.3.6.1.4.1.18.3.5.1.3.1	NodewfIf
1.3.6.1.4.1.18.3.5.1.3.1.1	ScalarwfIfNumber	read-only	mandatory	Total number of possible active interfaces
1.3.6.1.4.1.18.3.5.1.3.2	TablewfIfTable	not-accessible	mandatory	A table containing active interfaces
1.3.6.1.4.1.18.3.5.1.3.2.1	RowwfIfEntry	not-accessible	mandatory	A particular interface
1.3.6.1.4.1.18.3.5.1.3.2.1.1	ColumnwfIfIndex	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.2	ColumnwfIfDescr	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.3	ColumnwfIfType	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.4	ColumnwfIfMtu	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.5	ColumnwfIfSpeed	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.6	ColumnwfIfPhysAddress	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.7	ColumnwfIfAdminStatus	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.8	ColumnwfIfOperStatus	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.9	ColumnwfIfLastChange	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.10	ColumnwfIfInOctets	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.11	ColumnwfIfInUcastPkts	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.12	ColumnwfIfInNUCastPkts	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.13	ColumnwfIfInDiscards	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.14	ColumnwfIfInErrors	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.15	ColumnwfIfInUnknownProtos	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.16	ColumnwfIfOutOctets	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.17	ColumnwfIfOutUcastPkts	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.18	ColumnwfIfOutNUcastPkts	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.19	ColumnwfIfOutDiscards	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.20	ColumnwfIfOutErrors	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.21	ColumnwfIfOutQLen	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.3.2.1.22	ColumnwfIfSpecific	read-only	mandatory	Corresponds to same attribute of MIB-II's ifTable
1.3.6.1.4.1.18.3.5.1.4	NodewfCircuitOptsGroup
1.3.6.1.4.1.18.3.5.1.4.1	TablewfCctOptsTable	not-accessible	mandatory	The table of circuit names
1.3.6.1.4.1.18.3.5.1.4.1.1	RowwfCctOptsEntry	not-accessible	mandatory	Entry format for the table of circuit options
1.3.6.1.4.1.18.3.5.1.4.1.1.1	ColumnwfCctOptsDelete	read-write	mandatory	Creation and deletion flag for this record
1.3.6.1.4.1.18.3.5.1.4.1.1.2	ColumnwfCctOptsPriorityQueueingDisable	read-write	mandatory	Priority Queuing option
1.3.6.1.4.1.18.3.5.1.4.1.1.3	ColumnwfCctOptsCct	read-only	mandatory	circuit number
1.3.6.1.4.1.18.3.5.1.4.1.1.4	ColumnwfCctOptsHighPriorityQueueLimit	read-write	mandatory	High Priority Queue limit The minimum valid value is zero. The maximum valid value is 63 (HW xmit ring size) minus the sum of the Normal and Low queue limits.
1.3.6.1.4.1.18.3.5.1.4.1.1.5	ColumnwfCctOptsNormalPriorityQueueLimit	read-write	mandatory	Normal Priority Queue limit The minimum valid value is zero. The maximum valid value is 63 (HW xmit ring size) minus the sum of the High and Low queue limits.
1.3.6.1.4.1.18.3.5.1.4.1.1.6	ColumnwfCctOptsLowPriorityQueueLimit	read-write	mandatory	Low Priority Queue limit The minimum valid value is zero. The maximum valid value is 63 (HW xmit ring size) minus the sum of the High and Normal queue limits.
1.3.6.1.4.1.18.3.5.1.4.1.1.7	ColumnwfCctOptsMaxInterruptQueueLatency	read-write	mandatory	Interrupt Queue Latency
1.3.6.1.4.1.18.3.5.1.4.1.1.8	ColumnwfCctOptsMaxHighPriorityQueueLatency	read-write	mandatory	High Priority Queue Latency
1.3.6.1.4.1.18.3.5.1.4.1.1.9	ColumnwfCctOptsHiXmits	read-only	mandatory	High Priority Transmit count
1.3.6.1.4.1.18.3.5.1.4.1.1.10	ColumnwfCctOptsNormalXmits	read-only	mandatory	Normal Priority Transmit count
1.3.6.1.4.1.18.3.5.1.4.1.1.11	ColumnwfCctOptsLoXmits	read-only	mandatory	Low Priority Transmit count
1.3.6.1.4.1.18.3.5.1.4.1.1.12	ColumnwfCctOptsHiClippedPkts	read-only	mandatory	High Prio Transmit Clip Count
1.3.6.1.4.1.18.3.5.1.4.1.1.13	ColumnwfCctOptsNormalClippedPkts	read-only	mandatory	Normal Prio Transmit Clip Count
1.3.6.1.4.1.18.3.5.1.4.1.1.14	ColumnwfCctOptsLoClippedPkts	read-only	mandatory	Low Prio Transmit Clip Count
1.3.6.1.4.1.18.3.5.1.4.1.1.15	ColumnwfCctOptsIntrQHighWaterPkts	read-only	mandatory	Interrupt Queue high-water mark
1.3.6.1.4.1.18.3.5.1.4.1.1.16	ColumnwfCctOptsHiQHighWaterPkts	read-only	mandatory	High-priority Queue high-water mark
1.3.6.1.4.1.18.3.5.1.4.1.1.17	ColumnwfCctOptsNormalQHighWaterPkts	read-only	mandatory	Normal Queue high-water mark
1.3.6.1.4.1.18.3.5.1.4.1.1.18	ColumnwfCctOptsLoQHighWaterPkts	read-only	mandatory	Low-priority Queue high-water mark
1.3.6.1.4.1.18.3.5.1.4.1.1.19	ColumnwfCctOptsHighWaterPktsClear	read-write	mandatory	Attribute to clear the high-water marks. When the MIB changes, Priority Queueing (if ENABLED) checks to see if HighWaterPktsClear is different than the last ti…
1.3.6.1.4.1.18.3.5.1.4.1.1.20	ColumnwfCctOptsDroppedPkts	read-only	mandatory	Packets which were filtered in Priority Queueing
1.3.6.1.4.1.18.3.5.1.4.1.1.21	ColumnwfCctOptsLargePkts	read-only	mandatory	Large Packets which became an exception to latency rules
1.3.6.1.4.1.18.3.5.1.4.1.1.22	ColumnwfCctOptsRxPkts	read-only	mandatory	Packets received
1.3.6.1.4.1.18.3.5.1.4.2	TablewfCctOptsBrFilterTable	not-accessible	mandatory	Bridge Filters
1.3.6.1.4.1.18.3.5.1.4.2.1	RowwfCctOptsBrFilterEntry	not-accessible	mandatory	An entry in WfCctOptsBrFilterTable.
1.3.6.1.4.1.18.3.5.1.4.2.1.1	ColumnwfCctOptsBrFilterCreate	read-write	mandatory	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
1.3.6.1.4.1.18.3.5.1.4.2.1.2	ColumnwfCctOptsBrFilterEnable	read-write	mandatory	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
1.3.6.1.4.1.18.3.5.1.4.2.1.3	ColumnwfCctOptsBrFilterState	read-only	mandatory	Defines the current State of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error …
1.3.6.1.4.1.18.3.5.1.4.2.1.4	ColumnwfCctOptsBrFilterCounter	read-only	mandatory	The number of received packets that have matched this rule.
1.3.6.1.4.1.18.3.5.1.4.2.1.5	ColumnwfCctOptsBrFilterDefinition	read-write	mandatory	The filter rule definition.
1.3.6.1.4.1.18.3.5.1.4.2.1.6	ColumnwfCctOptsBrFilterReserved	not-accessible	mandatory	Reserved field.
1.3.6.1.4.1.18.3.5.1.4.2.1.7	ColumnwfCctOptsBrFilterCct	read-only	mandatory	The ID of the CctBridge Cct to which the filter is applied.
1.3.6.1.4.1.18.3.5.1.4.2.1.8	ColumnwfCctOptsBrFilterRuleNumber	read-only	mandatory	ID for the rule.
1.3.6.1.4.1.18.3.5.1.4.2.1.9	ColumnwfCctOptsBrFilterFragment	read-only	mandatory	Fragment number - for large rules.
1.3.6.1.4.1.18.3.5.1.4.3	TablewfCctOptsIpFilterTable	not-accessible	mandatory	Ip Filters
1.3.6.1.4.1.18.3.5.1.4.3.1	RowwfCctOptsIpFilterEntry	not-accessible	mandatory	An entry in WfCctOptsIpFilterTable.
1.3.6.1.4.1.18.3.5.1.4.3.1.1	ColumnwfCctOptsIpFilterCreate	read-write	mandatory	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
1.3.6.1.4.1.18.3.5.1.4.3.1.2	ColumnwfCctOptsIpFilterEnable	read-write	mandatory	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
1.3.6.1.4.1.18.3.5.1.4.3.1.3	ColumnwfCctOptsIpFilterState	read-only	mandatory	Defines the current State of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error …
1.3.6.1.4.1.18.3.5.1.4.3.1.4	ColumnwfCctOptsIpFilterCounter	read-only	mandatory	The number of received packets that have matched this rule.
1.3.6.1.4.1.18.3.5.1.4.3.1.5	ColumnwfCctOptsIpFilterDefinition	read-write	mandatory	The filter rule definition.
1.3.6.1.4.1.18.3.5.1.4.3.1.6	ColumnwfCctOptsIpFilterReserved	not-accessible	mandatory	Reserved field.
1.3.6.1.4.1.18.3.5.1.4.3.1.7	ColumnwfCctOptsIpFilterCct	read-only	mandatory	The ID of the CctIp Cct to which the filter is applied.
1.3.6.1.4.1.18.3.5.1.4.3.1.8	ColumnwfCctOptsIpFilterRuleNumber	read-only	mandatory	ID for the rule.
1.3.6.1.4.1.18.3.5.1.4.3.1.9	ColumnwfCctOptsIpFilterFragment	read-only	mandatory	Fragment number - for large rules.
1.3.6.1.4.1.18.3.5.1.4.4	TablewfCctOptsLengthBasedTable	not-accessible	mandatory	Length Based Priority Table
1.3.6.1.4.1.18.3.5.1.4.4.1	RowwfCctOptsLengthBasedEntry	not-accessible	mandatory	An entry in WfCctOptsLengthBasedTable.
1.3.6.1.4.1.18.3.5.1.4.4.1.1	ColumnwfCctOptsLengthBasedDelete	read-write	mandatory	Defines the existence of the length based priority filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
1.3.6.1.4.1.18.3.5.1.4.4.1.2	ColumnwfCctOptsLengthBasedDisable	read-write	mandatory	Defines whether or not the length based priority filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
1.3.6.1.4.1.18.3.5.1.4.4.1.3	ColumnwfCctOptsLengthBasedState	read-only	mandatory	Defines the current State of the length based priority filter: inactive - the rule is not in use. active - the rule is being used. error - the application dete…
1.3.6.1.4.1.18.3.5.1.4.4.1.4	ColumnwfCctOptsLengthBasedCct	read-only	mandatory	The ID of the Cct to which the filter is applied
1.3.6.1.4.1.18.3.5.1.4.4.1.5	ColumnwfCctOptsLengthBasedMux	read-only	mandatory	packet mux type
1.3.6.1.4.1.18.3.5.1.4.4.1.6	ColumnwfCctOptsLengthBasedData	read-only	mandatory	a five byte quantity of the form ethernet - 0x6003000000 (e.g. DECnet) lsap - 0xfefe030000 (e.g. OSI) snap - 0x0000000800 (e.g. IP) - 0x0800070800 (e.g. Applet…
1.3.6.1.4.1.18.3.5.1.4.4.1.7	ColumnwfCctOptsLengthBasedLength	read-write	mandatory	Maximum length of a packet to be considered high priority
1.3.6.1.4.1.18.3.5.1.4.4.1.8	ColumnwfCctOptsLengthBasedLessThanQ	read-write	mandatory	queue into which packets of length less than or equal wfCctOptsLengthBasedLength are placed
1.3.6.1.4.1.18.3.5.1.4.4.1.9	ColumnwfCctOptsLengthBasedGreaterThanQ	read-write	mandatory	queue into which packets of length greater than wfCctOptsLengthBasedLength are placed
1.3.6.1.4.1.18.3.5.2	NodewfDecGroup
1.3.6.1.4.1.18.3.5.2.1	NodewfivRouteGroup
1.3.6.1.4.1.18.3.5.2.1.1	ScalarwfivRouteCreateDelete	read-write	mandatory	'This value determines whether DECnet is configured on this slot.'
1.3.6.1.4.1.18.3.5.2.1.2	ScalarwfivRouteEnableDisable	read-write	mandatory	'This value determines whether DECnet is to startup.'
1.3.6.1.4.1.18.3.5.2.1.3	ScalarwfivRouteState	read-only	mandatory	'This value determines whether DECnet is to startup.'
1.3.6.1.4.1.18.3.5.2.1.4	ScalarwfivRouteBroadcastRouteTimer	read-write	mandatory	'This value determines the maximum time allowed between Routing updates on Ethernet circuits. When this timer expires before a routing update occurs, a routing…
1.3.6.1.4.1.18.3.5.2.1.5	ScalarwfivRouteRoutingVers	read-only	mandatory	'This read-only parameter identifies the executor node's Routing version number. The format is the same as for the Network Management version number.'
1.3.6.1.4.1.18.3.5.2.1.6	ScalarwfivRouteMaxAddr	read-write	mandatory	'This value represents the largest node number and, therefore, number of nodes that can be known about by the executor node's home area. The number is an integ…
1.3.6.1.4.1.18.3.5.2.1.7	ScalarwfivRouteMaxBdcastNonRouters	read-write	mandatory	'This value represents the maximum total number of nonrouters the executor node can have on its broadcast circuits for one slot. The number is an integer in th…
1.3.6.1.4.1.18.3.5.2.1.8	ScalarwfivRouteMaxBdcastRouters	read-write	mandatory	'This value represents the maximum total number of routers the executor node can have on its broadcast circuits for one slot. The number is an integer in the r…
1.3.6.1.4.1.18.3.5.2.1.9	ScalarwfivRouteMaxCircuits	read-write	mandatory	'This value represents the maximum number of Routing circuits that the executor node can know about. The number is decimal in the range 1-65535. Wellfleet limi…
1.3.6.1.4.1.18.3.5.2.1.10	ScalarwfivRouteMaxCost	read-write	mandatory	'This value represents the maximum total path cost allowed from the executor to any node within an area. The path cost is the sum of the circuit costs along a …
1.3.6.1.4.1.18.3.5.2.1.11	ScalarwfivRouteMaxHops	read-write	mandatory	'This value represents the maximum number of routing hops allowable from the executor to any other reachable node within an area. (A hop is the logical distanc…
1.3.6.1.4.1.18.3.5.2.1.12	ScalarwfivRouteMaxVisits	read-write	mandatory	'This value represents the maximum number of nodes a message coming into the executor node can have visited. If the message is not for this node and the MAXIMU…
1.3.6.1.4.1.18.3.5.2.1.13	ScalarwfivRouteAreaMaxCost	read-write	mandatory	'This value represents the maximum total path cost allowed from the executor to any other level 2 routing node. The AREA MAXIMUM COST number is decimal in the …
1.3.6.1.4.1.18.3.5.2.1.14	ScalarwfivRouteAreaMaxHops	read-write	mandatory	'This value represents the maximum number of routing hops allowable from the executor to any other level 2 routing node. The AREA MAXIMUM HOPS number is decima…
1.3.6.1.4.1.18.3.5.2.1.15	ScalarwfivRouteMaxArea	read-write	mandatory	'This value represents the largest area number and, therefore, number of areas that can be known about by the executor node's Routing. This parameter is only a…
1.3.6.1.4.1.18.3.5.2.1.16	ScalarwfivRouteType	read-only	mandatory	'This parameter indicates the type of the executor node. The node-type is one of the following: ROUTING III NONROUTING III ROUTING IV NONROUTING IV AREA A rout…
1.3.6.1.4.1.18.3.5.2.2	TablewfivCircuitTable	not-accessible	mandatory	' Table of DECnet Circuit Configuration and Counter Records'
1.3.6.1.4.1.18.3.5.2.2.1	RowwfivCircuitEntry	not-accessible	mandatory	'Parameters information about all circuits currently known. NOTE: depending on the type of object being querried (e.g., a level 1 vs. a level 2 router or end s…
1.3.6.1.4.1.18.3.5.2.2.1.1	ColumnwfivCircuitCreateDelete	read-write	mandatory	'This value determines whether the circuit is configured'
1.3.6.1.4.1.18.3.5.2.2.1.2	ColumnwfivCircuitEnableDisable	read-write	mandatory	'This value represents the circuit's Network Management operational state. NOTE: These values are incremented by one compared to the standard DECnet values in …
1.3.6.1.4.1.18.3.5.2.2.1.3	ColumnwfivCircuitCommonState	read-only	mandatory	'This value represents the circuit's operational state.'
1.3.6.1.4.1.18.3.5.2.2.1.4	ColumnwfivCircuitArea	read-write	mandatory	'DECnet Phase IV area number for this circuit.'
1.3.6.1.4.1.18.3.5.2.2.1.5	ColumnwfivCircuitNodeid	read-write	mandatory	'DECnet Phase IV node address for this circuit.'
1.3.6.1.4.1.18.3.5.2.2.1.6	ColumnwfivCircuitNodeAddr	read-only	mandatory	'The address of the adjacent node.'
1.3.6.1.4.1.18.3.5.2.2.1.7	ColumnwfivCircuitID	read-only	mandatory	'A unique value for each known circuit.'
1.3.6.1.4.1.18.3.5.2.2.1.8	ColumnwfivCircuitCommonType	read-only	mandatory	'Represents the type of the circuit. For X.25 circuits, the value must be set to X25. For DDCMP and Ethernet circuits it is read only and is the same value as …
1.3.6.1.4.1.18.3.5.2.2.1.9	ColumnwfivCircuitExecCost	read-write	mandatory	'This value represents the Routing cost of the circuit. Routing routes messages along the path between two nodes having the smallest cost. The cost is a decima…
1.3.6.1.4.1.18.3.5.2.2.1.10	ColumnwfivCircuitExecHelloTimer	read-write	mandatory	'This value determines the frequency of Routing Hello (T3) messages sent to the adjacent node on the circuit. Seconds is a decimal integer in the range 1-8191.'
1.3.6.1.4.1.18.3.5.2.2.1.11	ColumnwfivCircuitDesigRouterNodeAddr	read-only	mandatory	'This value is the address of the designated router.'
1.3.6.1.4.1.18.3.5.2.2.1.12	ColumnwfivCircuitMaxRouters	read-write	mandatory	'NR -This parameter is the maximum number of routers (including the executor itself) allowed on the circuit by Routing for circuits that are owned by the execu…
1.3.6.1.4.1.18.3.5.2.2.1.13	ColumnwfivCircuitRouterPri	read-write	mandatory	'This parameter is the priority that this router is to have in the selection of designated router for the circuit on circuits that are owned by the executor no…
1.3.6.1.4.1.18.3.5.2.2.1.14	ColumnwfivCircuitCountAgedPktLoss	read-only	mandatory	'Aged packet loss.'
1.3.6.1.4.1.18.3.5.2.2.1.15	ColumnwfivCircuitCountNodeUnrPktLoss	read-only	mandatory	'Node unreachable packet loss.'
1.3.6.1.4.1.18.3.5.2.2.1.16	ColumnwfivCircuitCountOutRngePktLoss	read-only	mandatory	'Node out-of-range packet loss.'
1.3.6.1.4.1.18.3.5.2.2.1.17	ColumnwfivCircuitCountOverSzePktLoss	read-only	mandatory	'Oversized packet loss.'
1.3.6.1.4.1.18.3.5.2.2.1.18	ColumnwfivCircuitCountPacketFmtErr	read-only	mandatory	'Packet format errors.'
1.3.6.1.4.1.18.3.5.2.2.1.19	ColumnwfivCircuitCountPtlRteUpdtLoss	read-only	mandatory	'Partial routing update loss.'
1.3.6.1.4.1.18.3.5.2.2.1.20	ColumnwfivCircuitCountTransitPksRecd	read-only	mandatory	'Transit packets Received. This value is stored internally as a 32 bit value.'
1.3.6.1.4.1.18.3.5.2.2.1.21	ColumnwfivCircuitCountTransitPkSent	read-only	mandatory	'Transit packets sent. This value is stored internally as a 32 bit value.'
1.3.6.1.4.1.18.3.5.2.2.1.22	ColumnwfivCircuitCountRtHelloSent	read-only	mandatory	' Router Hellos Sent'
1.3.6.1.4.1.18.3.5.2.2.1.23	ColumnwfivCircuitCountRtHelloRcvd	read-only	mandatory	' Router Hellos Received'
1.3.6.1.4.1.18.3.5.2.2.1.24	ColumnwfivCircuitCountHelloSent	read-only	mandatory	' Endnode Hellos Sent'
1.3.6.1.4.1.18.3.5.2.2.1.25	ColumnwfivCircuitCountHelloRcvd	read-only	mandatory	' Endnode Hellos Received'
1.3.6.1.4.1.18.3.5.2.2.1.26	ColumnwfivCircuitCountL1UpdSent	read-only	mandatory	' Level 1 Routing Updates Sent'
1.3.6.1.4.1.18.3.5.2.2.1.27	ColumnwfivCircuitCountL1UpdRcvd	read-only	mandatory	' Level 1 Routing Updates Received'
1.3.6.1.4.1.18.3.5.2.2.1.28	ColumnwfivCircuitCountAreaUpdSent	read-only	mandatory	' Area Routing Updates Sent'
1.3.6.1.4.1.18.3.5.2.2.1.29	ColumnwfivCircuitCountAreaUpdRcvd	read-only	mandatory	' Area Routing Updates Received'
1.3.6.1.4.1.18.3.5.2.2.1.30	ColumnwfivCircuitCountDropped	read-only	mandatory	' Dropped Packets '
1.3.6.1.4.1.18.3.5.2.2.1.31	ColumnwfivCircuitAllEndnodesMac	read-write	mandatory	'This parameter can be used to assign the AllEndnodes multicast MAC address value for use over WAN media (e.g. Frame Relay).'
1.3.6.1.4.1.18.3.5.2.2.1.32	ColumnwfivCircuitAllRoutersMac	read-write	mandatory	'This parameter can be used to assign the AllRouters multicast MAC address value for use over WAN media (e.g. Frame Relay).'
1.3.6.1.4.1.18.3.5.2.2.1.33	ColumnwfivCircuitAllAreaRoutersMac	read-write	mandatory	'This parameter can be used to assign the AllAreaRouters multicast MAC address value for use over WAN media (e.g. Frame Relay).'
1.3.6.1.4.1.18.3.5.2.2.1.34	ColumnwfivCircuitHelloEnableDisable	read-write	mandatory	' This parameter is used to disable to sending of Hellos to Endnodes. It would be used in conjunction with Static Adjacencies to limit the amount of data passe…
1.3.6.1.4.1.18.3.5.2.2.1.35	ColumnwfivCircuitRtHelloEnableDisable	read-write	mandatory	' This parameter is used to disable to sending of Hellos to Routers. It would be used in conjunction with Static Adjacencies to limit the amount of data passed…
1.3.6.1.4.1.18.3.5.2.2.1.36	ColumnwfivCircuitL1UpdateEnableDisable	read-write	mandatory	' This parameter is used to disable to sending of Level 1 topology updates. It would be used in conjunction with Static Adjacencies to limit the amount of data…
1.3.6.1.4.1.18.3.5.2.3	TablewfivLevel1RouteTable	not-accessible	mandatory	' Table of Level 1 Routing Table Entries'
1.3.6.1.4.1.18.3.5.2.3.1	RowwfivLevel1RouteEntry	not-accessible	mandatory	'A Record in the Level 1 Routing Table'
1.3.6.1.4.1.18.3.5.2.3.1.1	ColumnwfivLevel1AreaId	read-only	mandatory	'Area Id for this node'
1.3.6.1.4.1.18.3.5.2.3.1.2	ColumnwfivLevel1NodeId	read-only	mandatory	'Area Id for this node'
1.3.6.1.4.1.18.3.5.2.3.1.3	ColumnwfivLevel1RouteNodeAddr	read-only	mandatory	'This value is the address of the node about which routing information is contained in this level 1 routing table.'
1.3.6.1.4.1.18.3.5.2.3.1.4	ColumnwfivLevel1RouteCircuitID	read-only	mandatory	'This READ_ONLY parameter identifies the circuit used to get to a remote node. Circuit-id is an id-string. This parameter can be used when displaying a list of…
1.3.6.1.4.1.18.3.5.2.3.1.5	ColumnwfivLevel1RouteCost	read-only	mandatory	'This READ_ONLY parameter represents the total cost over the current path to the destination node. Cost is a positive integer value associated with using a cir…
1.3.6.1.4.1.18.3.5.2.3.1.6	ColumnwfivLevel1RouteHops	read-only	mandatory	'This READ_ONLY parameter represents the number of hops over to a destination node. A hop is Routing value representing the logical distance between two nodes …
1.3.6.1.4.1.18.3.5.2.3.1.7	ColumnwfivLevel1RouteNextNode	read-only	mandatory	'This READ_ONLY value indicates the next node on the circuit used to get to the node under scrutiny (next hop).'
1.3.6.1.4.1.18.3.5.2.4	TablewfivAreaTable	not-accessible	mandatory	'Table of Area Routing Table Entries'
1.3.6.1.4.1.18.3.5.2.4.1	RowwfivAreaEntry	not-accessible	mandatory	'The area routing information.'
1.3.6.1.4.1.18.3.5.2.4.1.1	ColumnwfivAreaNum	read-only	mandatory	'This value indicates the area number of this entry.'
1.3.6.1.4.1.18.3.5.2.4.1.2	ColumnwfivAreaState	read-only	mandatory	'This value indicates the state of the area'
1.3.6.1.4.1.18.3.5.2.4.1.3	ColumnwfivAreaCost	read-only	mandatory	'The total cost over the current path to the destination area. Cost is a value associated with using a circuit. Routing routes messages (data) along the path b…
1.3.6.1.4.1.18.3.5.2.4.1.4	ColumnwfivAreaHops	read-only	mandatory	'The number of hops to a destination area. A hop is the routing value representing the logical distance between two areas in network.'
1.3.6.1.4.1.18.3.5.2.4.1.5	ColumnwfivAreaCircuitID	read-only	mandatory	'The circuit used to get to the remote area'
1.3.6.1.4.1.18.3.5.2.4.1.6	ColumnwfivAreaNextNode	read-only	mandatory	'The next node on the circuit used to get to the area under scrutiny.'
1.3.6.1.4.1.18.3.5.2.5	TablewfivAdjTable	not-accessible	mandatory	Adjacency Table
1.3.6.1.4.1.18.3.5.2.5.1	RowwfivAdjEntry	not-accessible	mandatory	' Adjacency Table - the real index is the adjacency index'
1.3.6.1.4.1.18.3.5.2.5.1.1	ColumnwfivAdjIndex	read-only	mandatory	'Index in the Adjacency Table'
1.3.6.1.4.1.18.3.5.2.5.1.2	ColumnwfivAdjNodeAddr	read-only	mandatory	'The address of the adjacent node.'
1.3.6.1.4.1.18.3.5.2.5.1.3	ColumnwfivAdjBlockSize	read-only	mandatory	'This READ_ONLY parameter is the block size that was negotiated with the adjacent Routing layer during Routing initialization over a particular circuit. It inc…
1.3.6.1.4.1.18.3.5.2.5.1.4	ColumnwfivAdjListenTimer	read-only	mandatory	'This READ_ONLY value determines the maximum time allowed to elapse before Routing receives some message (either a Hello message or a user message) from the ad…
1.3.6.1.4.1.18.3.5.2.5.1.5	ColumnwfivAdjCircuitID	read-only	mandatory	'A unique value for each known circuit.'
1.3.6.1.4.1.18.3.5.2.5.1.6	ColumnwfivAdjType	read-only	mandatory	'This parameter indicates the type of adjacency. For adjacent nodes, this is a READ_ONLY parameter that indicates the type of the reachable adjacent node. NOTE…
1.3.6.1.4.1.18.3.5.2.5.1.7	ColumnwfivAdjState	read-only	mandatory	'This value indicates the state of a router adjacency. On adjacencies over a circuit of type (wfivCircuitCommonType) Ethernet, CI, or FDDI, with an adjacent no…
1.3.6.1.4.1.18.3.5.2.5.1.8	ColumnwfivAdjPriority	read-only	mandatory	'Priority assigned by the adjacent node for this circuit.'
1.3.6.1.4.1.18.3.5.2.5.1.9	ColumnwfivAdjClass	read-only	mandatory	'Specifies whether this adjacency is Static or Dynamic'
1.3.6.1.4.1.18.3.5.2.6	TablewfivTrafficFilterTable	not-accessible	mandatory	DECNET Traffic Filters
1.3.6.1.4.1.18.3.5.2.6.1	RowwfivTrafficFilterEntry	not-accessible	mandatory	An entry in WfivTrafficFilterTable.
1.3.6.1.4.1.18.3.5.2.6.1.1	ColumnwfivTrafficFilterCreate	read-write	mandatory	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
1.3.6.1.4.1.18.3.5.2.6.1.2	ColumnwfivTrafficFilterEnable	read-write	mandatory	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
1.3.6.1.4.1.18.3.5.2.6.1.3	ColumnwfivTrafficFilterStatus	read-only	mandatory	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error…
1.3.6.1.4.1.18.3.5.2.6.1.4	ColumnwfivTrafficFilterCounter	read-only	mandatory	The number of received packets that have matched this rule.
1.3.6.1.4.1.18.3.5.2.6.1.5	ColumnwfivTrafficFilterDefinition	read-write	mandatory	The filter rule definition.
1.3.6.1.4.1.18.3.5.2.6.1.6	ColumnwfivTrafficFilterReserved	not-accessible	mandatory	Reserved field.
1.3.6.1.4.1.18.3.5.2.6.1.7	ColumnwfivTrafficFilterCircuit	read-only	mandatory	The ID of the Circuit to which the filter is applied.
1.3.6.1.4.1.18.3.5.2.6.1.8	ColumnwfivTrafficFilterRuleNumber	read-only	mandatory	ID for the rule.
1.3.6.1.4.1.18.3.5.2.6.1.9	ColumnwfivTrafficFilterFragment	read-only	mandatory	Fragment number - for large rules.
1.3.6.1.4.1.18.3.5.2.7	TablewfivStaticAdjTable	not-accessible	mandatory	Static Adjacency Table
1.3.6.1.4.1.18.3.5.2.7.1	RowwfivStaticAdjEntry	not-accessible	mandatory	' Static Adjacency Table '
1.3.6.1.4.1.18.3.5.2.7.1.1	ColumnwfivStaticAdjCreateDelete	read-write	mandatory	'This value determines whether the static adjacency is configured'
1.3.6.1.4.1.18.3.5.2.7.1.2	ColumnwfivStaticAdjEnableDisable	read-write	mandatory	'This value determines whether the static adjacency is active '
1.3.6.1.4.1.18.3.5.2.7.1.3	ColumnwfivStaticAdjArea	read-only	mandatory	'DECnet Phase IV area number for this static Adjacency.'
1.3.6.1.4.1.18.3.5.2.7.1.4	ColumnwfivStaticAdjNodeid	read-only	mandatory	'DECnet Phase IV node address for this static adjacency.'
1.3.6.1.4.1.18.3.5.2.7.1.5	ColumnwfivStaticAdjCircuitID	read-only	mandatory	'The circuit used for this static adjacency.'
1.3.6.1.4.1.18.3.5.2.7.1.6	ColumnwfivStaticAdjNodeAddr	read-only	mandatory	'The address of the adjacent node in display format.'
1.3.6.1.4.1.18.3.5.2.7.1.7	ColumnwfivStaticAdjType	read-write	mandatory	' Specifies whether the static adjacency is to a router or end station.'
1.3.6.1.4.1.18.3.5.2.7.1.8	ColumnwfivStaticAdjPriority	read-write	mandatory	' Specifies the priority of the static adjacency if it's a router.'
1.3.6.1.4.1.18.3.5.2.7.1.9	ColumnwfivStaticAdjDestMACAddr	read-write	mandatory	' Specifies the destination MAC address of the Static Adjacency if the circuit type is Frame Relay or SMDS.'
1.3.6.1.4.1.18.3.5.3	NodewfInternet
1.3.6.1.4.1.18.3.5.3.1	NodewfArpGroup
1.3.6.1.4.1.18.3.5.3.1.1	NodewfArpBase
1.3.6.1.4.1.18.3.5.3.1.1.1	ScalarwfArpBaseCreate	read-write	mandatory	Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete ARP.
1.3.6.1.4.1.18.3.5.3.1.1.2	ScalarwfArpBaseEnable	read-write	mandatory	Enable/Disable Parameter indicates whether this ARP record is enabled or disabled.
1.3.6.1.4.1.18.3.5.3.1.1.3	ScalarwfArpBaseForwarding	read-write	mandatory	Equivalent to IP Host Only. This attribute says that ARP should send unknown addresses to the bridge for further handling
1.3.6.1.4.1.18.3.5.3.1.2	TablewfArpIntfTable	not-accessible	mandatory	List of configured ARP interfaces
1.3.6.1.4.1.18.3.5.3.1.2.1	RowwfArpIntfEntry	not-accessible	mandatory	A description of an ARP interface
1.3.6.1.4.1.18.3.5.3.1.2.1.1	ColumnwfArpCreate	read-write	mandatory	Indicates whether this ARP intf record is to be deleted or created
1.3.6.1.4.1.18.3.5.3.1.2.1.2	ColumnwfArpEnable	read-write	mandatory	Indicates whether this ARP intf record is to be enabled or disabled
1.3.6.1.4.1.18.3.5.3.1.2.1.3	ColumnwfArpCctno	read-only	mandatory	Which Circuit arp should run on
1.3.6.1.4.1.18.3.5.3.2	NodewfIpRouting
1.3.6.1.4.1.18.3.5.3.2.1	NodewfIpGroup
1.3.6.1.4.1.18.3.5.3.2.1.1	NodewfIpBase
1.3.6.1.4.1.18.3.5.3.2.1.1.1	ScalarwfIpBaseCreate	read-write	mandatory	Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IP.
1.3.6.1.4.1.18.3.5.3.2.1.1.2	ScalarwfIpBaseEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable IP.
1.3.6.1.4.1.18.3.5.3.2.1.1.3	ScalarwfIpBaseState	read-only	mandatory	The current state of the entire IP.
1.3.6.1.4.1.18.3.5.3.2.1.1.4	ScalarwfIpBaseForwarding	read-write	mandatory	The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g…
1.3.6.1.4.1.18.3.5.3.2.1.1.5	ScalarwfIpBaseDefaultTTL	read-write	mandatory	The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the tra…
1.3.6.1.4.1.18.3.5.3.2.1.1.6	ScalarwfIpBaseRipDiameter	read-write	mandatory	The Diameter of the RIP network. 1 less than 'infinity'
1.3.6.1.4.1.18.3.5.3.2.1.2	TablewfIpBaseRtEntryTable	not-accessible	mandatory	The list of elements in IP's routing table
1.3.6.1.4.1.18.3.5.3.2.1.2.1	RowwfIpBaseRtEntry	not-accessible	mandatory	A description of a route
1.3.6.1.4.1.18.3.5.3.2.1.2.1.1	ColumnwfIpBaseRouteDest	read-only	mandatory	The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.2	ColumnwfIpBaseRouteIfIndex	read-only	mandatory	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.3	ColumnwfIpBaseRouteMetric1	read-only	mandatory	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If …
1.3.6.1.4.1.18.3.5.3.2.1.2.1.4	ColumnwfIpBaseRouteMetric2	read-only	mandatory	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.5	ColumnwfIpBaseRouteMetric3	read-only	mandatory	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.6	ColumnwfIpBaseRouteMetric4	read-only	mandatory	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.7	ColumnwfIpBaseRouteNextHop	read-only	mandatory	The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.8	ColumnwfIpBaseRouteType	read-only	mandatory	The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.9	ColumnwfIpBaseRouteProto	read-only	mandatory	The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.10	ColumnwfIpBaseRouteAge	read-only	mandatory	The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.11	ColumnwfIpBaseRouteMask	read-only	mandatory	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.12	ColumnwfIpBaseRouteMetric5	read-only	mandatory	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If…
1.3.6.1.4.1.18.3.5.3.2.1.2.1.13	ColumnwfIpBaseRouteInfo	read-only	mandatory	A user-defined string which describes this Route entry
1.3.6.1.4.1.18.3.5.3.2.1.3	TablewfIpBaseHostEntryTable	not-accessible	mandatory	The list of elements in IP's host table
1.3.6.1.4.1.18.3.5.3.2.1.3.1	RowwfIpBaseHostEntry	not-accessible	mandatory	A description of a resolved host
1.3.6.1.4.1.18.3.5.3.2.1.3.1.1	ColumnwfIpBaseNetToMediaIfIndex	read-only	mandatory	The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified …
1.3.6.1.4.1.18.3.5.3.2.1.3.1.2	ColumnwfIpBaseNetToMediaPhysAddress	read-only	mandatory	The media-dependent `physical' address.
1.3.6.1.4.1.18.3.5.3.2.1.3.1.3	ColumnwfIpBaseNetToMediaNetAddress	read-only	mandatory	The IpAddress corresponding to the media-dependent `physical' address.
1.3.6.1.4.1.18.3.5.3.2.1.3.1.4	ColumnwfIpBaseNetToMediaType	read-write	mandatory	The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e…
1.3.6.1.4.1.18.3.5.3.2.1.4	TablewfIpInterfaceTable	not-accessible	mandatory	The list of configured IP interface
1.3.6.1.4.1.18.3.5.3.2.1.4.1	RowwfIpInterfaceEntry	not-accessible	mandatory	An IP interface description
1.3.6.1.4.1.18.3.5.3.2.1.4.1.1	ColumnwfIpInterfaceCreate	read-write	mandatory	Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IP interface.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.2	ColumnwfIpInterfaceEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IP interface.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.3	ColumnwfIpInterfaceState	read-only	mandatory	INvalid indicates an error in processing the cfg record
1.3.6.1.4.1.18.3.5.3.2.1.4.1.4	ColumnwfIpInterfaceAddr	read-only	mandatory	The IP Address to which this entry's addressing information pertains
1.3.6.1.4.1.18.3.5.3.2.1.4.1.5	ColumnwfIpInterfaceCircuit	read-only	mandatory	The Circuit Number that this interface runs over
1.3.6.1.4.1.18.3.5.3.2.1.4.1.6	ColumnwfIpInterfaceMask	read-write	mandatory	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits …
1.3.6.1.4.1.18.3.5.3.2.1.4.1.7	ColumnwfIpInterfaceCost	read-write	mandatory	The Cost metric associated with the IP Address of this entry
1.3.6.1.4.1.18.3.5.3.2.1.4.1.8	ColumnwfIpInterfaceCfgBcastAddr	read-write	mandatory	The user can specifcy a broadcast address for a NWIF
1.3.6.1.4.1.18.3.5.3.2.1.4.1.9	ColumnwfIpInterfaceBcastAddr	read-only	mandatory	The value of the broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. This value applies to bo…
1.3.6.1.4.1.18.3.5.3.2.1.4.1.10	ColumnwfIpInterfaceMTUDiscovery	read-write	mandatory	Whether MTU discovery option is on/off
1.3.6.1.4.1.18.3.5.3.2.1.4.1.11	ColumnwfIpInterfaceAMR	read-write	mandatory	Whether Address Mask Reply is ON/OFF
1.3.6.1.4.1.18.3.5.3.2.1.4.1.12	ColumnwfIpInterfaceASB	read-write	mandatory	Whether All-Subnet Broadcasts Are excepted and Sent out this NWIF
1.3.6.1.4.1.18.3.5.3.2.1.4.1.13	ColumnwfIpInterfaceAddressResolutionType	read-write	mandatory	Indicates which Address Resolution Type to use
1.3.6.1.4.1.18.3.5.3.2.1.4.1.14	ColumnwfIpInterfaceProxy	read-write	mandatory	Indicates Whether Proxy is on this Interface or not
1.3.6.1.4.1.18.3.5.3.2.1.4.1.15	ColumnwfIpInterfaceHostCache	read-write	mandatory	Whether the Host Cache (Address Aging) is on or not. A Range of discrete values is specified as well as a value meaning don't age
1.3.6.1.4.1.18.3.5.3.2.1.4.1.16	ColumnwfIpInterfaceUdpXsumOn	read-write	mandatory	Whether to turn UDP checksum verification on for UDP packets recieved and transmitted by this router
1.3.6.1.4.1.18.3.5.3.2.1.4.1.17	ColumnwfIpInterfaceCfgMacAddress	read-write	mandatory	The desired mac set by the user
1.3.6.1.4.1.18.3.5.3.2.1.4.1.18	ColumnwfIpInterfaceMacAddress	read-only	mandatory	The MAC Address for this Interface- actual one used
1.3.6.1.4.1.18.3.5.3.2.1.4.1.19	ColumnwfIpInterfaceReasmMaxSize	read-only	mandatory	The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.20	ColumnwfIpInterfaceMaxInfo	read-only	mandatory	The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.21	ColumnwfIpInterfaceInReceives	read-only	mandatory	The total number of input datagrams received from interfaces, including those received in error.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.22	ColumnwfIpInterfaceInHdrErrors	read-only	mandatory	The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live …
1.3.6.1.4.1.18.3.5.3.2.1.4.1.23	ColumnwfIpInterfaceInAddrErrors	read-only	mandatory	The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th…
1.3.6.1.4.1.18.3.5.3.2.1.4.1.24	ColumnwfIpInterfaceForwDatagrams	read-only	mandatory	The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the…
1.3.6.1.4.1.18.3.5.3.2.1.4.1.25	ColumnwfIpInterfaceInUnknownProtos	read-only	mandatory	The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.26	ColumnwfIpInterfaceInDiscards	read-only	mandatory	The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff…
1.3.6.1.4.1.18.3.5.3.2.1.4.1.27	ColumnwfIpInterfaceInDelivers	read-only	mandatory	The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
1.3.6.1.4.1.18.3.5.3.2.1.4.1.28	ColumnwfIpInterfaceOutRequests	read-only	mandatory	The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in…
1.3.6.1.4.1.18.3.5.3.2.1.4.1.29	ColumnwfIpInterfaceOutDiscards	read-only	mandatory	The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for …
1.3.6.1.4.1.18.3.5.3.2.1.4.1.30	ColumnwfIpInterfaceOutNoRoutes	read-only	mandatory	The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted…
1.3.6.1.4.1.18.3.5.3.2.1.4.1.31	ColumnwfIpInterfaceReasmTimeout	read-only	mandatory	The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.32	ColumnwfIpInterfaceReasmReqds	read-only	mandatory	The number of IP fragments received which needed to be reassembled at this entity.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.33	ColumnwfIpInterfaceReasmOKs	read-only	mandatory	The number of IP datagrams successfully reassembled.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.34	ColumnwfIpInterfaceReasmFails	read-only	mandatory	The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di…
1.3.6.1.4.1.18.3.5.3.2.1.4.1.35	ColumnwfIpInterfaceFragOKs	read-only	mandatory	The number of IP datagrams that have been successfully fragmented at this entity.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.36	ColumnwfIpInterfaceFragFails	read-only	mandatory	The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl…
1.3.6.1.4.1.18.3.5.3.2.1.4.1.37	ColumnwfIpInterfaceFragCreates	read-only	mandatory	The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.38	ColumnwfIpInterfaceIcmpInMsgs	read-only	mandatory	The total number of ICMP messages which includes all those counted by wfIpInterfaceIcmpInErrors.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.39	ColumnwfIpInterfaceIcmpInErrors	read-only	mandatory	The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
1.3.6.1.4.1.18.3.5.3.2.1.4.1.40	ColumnwfIpInterfaceIcmpInDestUnreachs	read-only	mandatory	The number of ICMP Destination Unreachable messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.41	ColumnwfIpInterfaceIcmpInTimeExcds	read-only	mandatory	The number of ICMP Time Exceeded messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.42	ColumnwfIpInterfaceIcmpInParmProbs	read-only	mandatory	The number of ICMP Parameter Problem messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.43	ColumnwfIpInterfaceIcmpInSrcQuenchs	read-only	mandatory	The number of ICMP Source Quench messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.44	ColumnwfIpInterfaceIcmpInRedirects	read-only	mandatory	The number of ICMP Redirect messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.45	ColumnwfIpInterfaceIcmpInEchos	read-only	mandatory	The number of ICMP Echo (request) messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.46	ColumnwfIpInterfaceIcmpInEchoReps	read-only	mandatory	The number of ICMP Echo Reply messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.47	ColumnwfIpInterfaceIcmpInTimestamps	read-only	mandatory	The number of ICMP Timestamp (request) messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.48	ColumnwfIpInterfaceIcmpInTimestampReps	read-only	mandatory	The number of ICMP Timestamp Reply messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.49	ColumnwfIpInterfaceIcmpInAddrMasks	read-only	mandatory	The number of ICMP Address Mask Request messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.50	ColumnwfIpInterfaceIcmpInAddrMaskReps	read-only	mandatory	The number of ICMP Address Mask Reply messages received.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.51	ColumnwfIpInterfaceIcmpOutMsgs	read-only	mandatory	The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.52	ColumnwfIpInterfaceIcmpOutErrors	read-only	mandatory	The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro…
1.3.6.1.4.1.18.3.5.3.2.1.4.1.53	ColumnwfIpInterfaceIcmpOutDestUnreachs	read-only	mandatory	The number of ICMP Destination Unreachable messages sent.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.54	ColumnwfIpInterfaceIcmpOutTimeExcds	read-only	mandatory	The number of ICMP Time Exceeded messages sent.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.55	ColumnwfIpInterfaceIcmpOutParmProbs	read-only	mandatory	The number of ICMP Parameter Problem messages sent.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.56	ColumnwfIpInterfaceIcmpOutSrcQuenchs	read-only	mandatory	The number of ICMP Source Quench messages sent.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.57	ColumnwfIpInterfaceIcmpOutRedirects	read-only	mandatory	The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.58	ColumnwfIpInterfaceIcmpOutEchos	read-only	mandatory	The number of ICMP Echo (request) messages sent.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.59	ColumnwfIpInterfaceIcmpOutEchoReps	read-only	mandatory	The number of ICMP Echo Reply messages sent.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.60	ColumnwfIpInterfaceIcmpOutTimestamps	read-only	mandatory	The number of ICMP Timestamp (request) messages sent.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.61	ColumnwfIpInterfaceIcmpOutTimestampReps	read-only	mandatory	The number of ICMP Timestamp Reply messages sent.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.62	ColumnwfIpInterfaceIcmpOutAddrMasks	read-only	mandatory	The number of ICMP Address Mask Request messages sent.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.63	ColumnwfIpInterfaceIcmpOutAddrMaskReps	read-only	mandatory	The number of ICMP Address Mask Reply messages sent.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.64	ColumnwfIpInterfaceTrEndStation	read-write	mandatory	Use Source Routing over token ring selection. Only applies if pam type is TRING.
1.3.6.1.4.1.18.3.5.3.2.1.4.1.65	ColumnwfIpInterfaceSMDSGroupAddress	read-write	mandatory	The SMDS group address
1.3.6.1.4.1.18.3.5.3.2.1.4.1.66	ColumnwfIpInterfaceSMDSArpReqAddress	read-write	mandatory	The SMDS arp req address
1.3.6.1.4.1.18.3.5.3.2.1.4.1.67	ColumnwfIpInterfaceFRBcastDlci	read-write	mandatory	Frame Relay broadcast dlci
1.3.6.1.4.1.18.3.5.3.2.1.4.1.68	ColumnwfIpInterfaceFRMcast1Dlci	read-write	mandatory	Frame Relay multicast dlci #1
1.3.6.1.4.1.18.3.5.3.2.1.4.1.69	ColumnwfIpInterfaceFRMcast2Dlci	read-write	mandatory	Frame Relay multicast dlci #2
1.3.6.1.4.1.18.3.5.3.2.1.4.1.70	ColumnwfIpInterfaceRedirect	read-write	mandatory	Indicates Whether we're sending out redirects on this Interface or not
1.3.6.1.4.1.18.3.5.3.2.1.4.1.71	ColumnwfIpInterfaceEnetArpEncaps	read-write	mandatory	The data link encapsulation type to use for ARP packets if the the media is ethernet.
1.3.6.1.4.1.18.3.5.3.2.1.5	TablewfIpStaticRouteTable	not-accessible	mandatory	The list of static routes
1.3.6.1.4.1.18.3.5.3.2.1.5.1	RowwfIpStaticRouteEntry	not-accessible	mandatory	A static route definition
1.3.6.1.4.1.18.3.5.3.2.1.5.1.1	ColumnwfIpSrCreate	read-write	mandatory	Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete the IP Static Route.
1.3.6.1.4.1.18.3.5.3.2.1.5.1.2	ColumnwfIpSrEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable this IP Static Route.
1.3.6.1.4.1.18.3.5.3.2.1.5.1.3	ColumnwfIpSrIpAddress	read-only	mandatory	The Address of this static route
1.3.6.1.4.1.18.3.5.3.2.1.5.1.4	ColumnwfIpSrIpNetMask	read-only	mandatory	The IP Network Mask for this Static Route
1.3.6.1.4.1.18.3.5.3.2.1.5.1.5	ColumnwfIpSrCost	read-write	mandatory	The Cost of this Static Route
1.3.6.1.4.1.18.3.5.3.2.1.5.1.6	ColumnwfIpSrNextHopAddr	read-write	mandatory	The Next Hop IP Address
1.3.6.1.4.1.18.3.5.3.2.1.5.1.7	ColumnwfIpSrNextHopMask	read-write	mandatory	The Next Hop IP Netmask
1.3.6.1.4.1.18.3.5.3.2.1.5.1.8	ColumnwfIpSrPreference	read-write	mandatory	This Routes Preference
1.3.6.1.4.1.18.3.5.3.2.1.5.1.9	ColumnwfIpSrIpAddressRt	read-only	mandatory	The Route Identifier Which numbered route this is to be
1.3.6.1.4.1.18.3.5.3.2.1.5.1.10	ColumnwfIpSrValid	read-only	mandatory	Whether this Static Route is valid or not
1.3.6.1.4.1.18.3.5.3.2.1.6	TablewfIpAdjacentHostTable	not-accessible	mandatory	The list of Adjacent Hosts (static IP-Mac resolutions)
1.3.6.1.4.1.18.3.5.3.2.1.6.1	RowwfIpAdjacentHostEntry	not-accessible	mandatory	A description of an adjacent host
1.3.6.1.4.1.18.3.5.3.2.1.6.1.1	ColumnwfIpAdjHostCreate	read-write	mandatory	Whether to Delete this Adjacent Host
1.3.6.1.4.1.18.3.5.3.2.1.6.1.2	ColumnwfIpAdjHostEnable	read-write	mandatory	Whether to Disable this Host
1.3.6.1.4.1.18.3.5.3.2.1.6.1.3	ColumnwfIpAdjHostIpAddress	read-only	mandatory	The IP address of this Adjacent Host
1.3.6.1.4.1.18.3.5.3.2.1.6.1.4	ColumnwfIpAdjHostIntf	read-write	mandatory	The Interface for this Adjacent Host
1.3.6.1.4.1.18.3.5.3.2.1.6.1.5	ColumnwfIpAdjHostIntfMask	read-write	mandatory	The Network Mask of this Intf
1.3.6.1.4.1.18.3.5.3.2.1.6.1.6	ColumnwfIpAdjHostMacAddr	read-write	mandatory	The LAN Address for this HOST
1.3.6.1.4.1.18.3.5.3.2.1.6.1.7	ColumnwfIpAdjHostEncaps	read-write	mandatory	The encapsulation type of this entry
1.3.6.1.4.1.18.3.5.3.2.1.6.1.8	ColumnwfIpAdjHostValid	read-only	mandatory	Whether the record passed validation or not
1.3.6.1.4.1.18.3.5.3.2.1.7	TablewfIpTrafficFilterTable	not-accessible	mandatory	IP Traffic Filters
1.3.6.1.4.1.18.3.5.3.2.1.7.1	RowwfIpTrafficFilterEntry	not-accessible	mandatory	A traffic filter definition
1.3.6.1.4.1.18.3.5.3.2.1.7.1.1	ColumnwfIpTrafficFilterCreate	read-write	mandatory	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
1.3.6.1.4.1.18.3.5.3.2.1.7.1.2	ColumnwfIpTrafficFilterEnable	read-write	mandatory	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
1.3.6.1.4.1.18.3.5.3.2.1.7.1.3	ColumnwfIpTrafficFilterStatus	read-only	mandatory	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error…
1.3.6.1.4.1.18.3.5.3.2.1.7.1.4	ColumnwfIpTrafficFilterCounter	read-only	mandatory	The number of received packets that have matched this rule.
1.3.6.1.4.1.18.3.5.3.2.1.7.1.5	ColumnwfIpTrafficFilterDefinition	read-write	mandatory	The filter rule definition.
1.3.6.1.4.1.18.3.5.3.2.1.7.1.6	ColumnwfIpTrafficFilterReserved	not-accessible	mandatory	Reserved field.
1.3.6.1.4.1.18.3.5.3.2.1.7.1.7	ColumnwfIpTrafficFilterInterface	read-only	mandatory	The network address of the IP interface to which this filter is applied.
1.3.6.1.4.1.18.3.5.3.2.1.7.1.8	ColumnwfIpTrafficFilterCircuit	read-only	mandatory	The ID of the Circuit to which the filter is applied.
1.3.6.1.4.1.18.3.5.3.2.1.7.1.9	ColumnwfIpTrafficFilterRuleNumber	read-only	mandatory	ID for the rule.
1.3.6.1.4.1.18.3.5.3.2.1.7.1.10	ColumnwfIpTrafficFilterFragment	read-only	mandatory	Fragment number - for large rules.
1.3.6.1.4.1.18.3.5.3.2.1.8	TablewfIpRfRipImportTable	not-accessible	mandatory	The list of Rip Import Route Filter Rules in IP
1.3.6.1.4.1.18.3.5.3.2.1.8.1	RowwfIpRfRipImportEntry	not-accessible	mandatory	An entry in the Rip Import Rule Table
1.3.6.1.4.1.18.3.5.3.2.1.8.1.1	ColumnwfIpRfRipImportCreate	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule.
1.3.6.1.4.1.18.3.5.3.2.1.8.1.2	ColumnwfIpRfRipImportEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule.
1.3.6.1.4.1.18.3.5.3.2.1.8.1.3	ColumnwfIpRfRipImportAddress	read-only	mandatory	The IP address to which this filter applies
1.3.6.1.4.1.18.3.5.3.2.1.8.1.4	ColumnwfIpRfRipImportMask	read-only	mandatory	The Mask to which this filter applies. When combined with the Address, a range is specified for application of this rule
1.3.6.1.4.1.18.3.5.3.2.1.8.1.5	ColumnwfIpRfRipImportAction	read-write	mandatory	The Action of this Filter
1.3.6.1.4.1.18.3.5.3.2.1.8.1.6	ColumnwfIpRfRipImportPreference	read-write	mandatory	The Preference associated with this filter - only valid if accept
1.3.6.1.4.1.18.3.5.3.2.1.8.1.7	ColumnwfIpRfRipImportRipGateway	read-only	mandatory	The RIP Gateway to be concerned with
1.3.6.1.4.1.18.3.5.3.2.1.8.1.8	ColumnwfIpRfRipImportRipInterface	read-only	mandatory	The IP Network Interface to be concerned with
1.3.6.1.4.1.18.3.5.3.2.1.9	TablewfIpRfRipExportTable	not-accessible	mandatory	The list of Rip Export Route Filter Rules in IP
1.3.6.1.4.1.18.3.5.3.2.1.9.1	RowwfIpRfRipExportEntry	not-accessible	mandatory	An entry in the Rip Export Rule Table
1.3.6.1.4.1.18.3.5.3.2.1.9.1.1	ColumnwfIpRfRipExportCreate	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule.
1.3.6.1.4.1.18.3.5.3.2.1.9.1.2	ColumnwfIpRfRipExportEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule.
1.3.6.1.4.1.18.3.5.3.2.1.9.1.3	ColumnwfIpRfRipExportAddress	read-only	mandatory	The IP address to which this filter applies
1.3.6.1.4.1.18.3.5.3.2.1.9.1.4	ColumnwfIpRfRipExportMask	read-only	mandatory	The Mask for the Address Above. When combined with the Address, a range is specified for application of this filter rule
1.3.6.1.4.1.18.3.5.3.2.1.9.1.5	ColumnwfIpRfRipExportFromProtocol	read-only	mandatory	The protocol from which this Information is derived
1.3.6.1.4.1.18.3.5.3.2.1.9.1.6	ColumnwfIpRfRipExportAction	read-write	mandatory	The action of this export filter
1.3.6.1.4.1.18.3.5.3.2.1.9.1.7	ColumnwfIpRfRipExportInterface	read-only	mandatory	The optional outbound interface on which to apply this filter
1.3.6.1.4.1.18.3.5.3.2.1.9.1.8	ColumnwfIpRfRipExportRipMetric	read-write	mandatory	The optional export RIP metric to apply to this filter. Zero means: use the route's actual cost. Only valid for propagate
1.3.6.1.4.1.18.3.5.3.2.1.10	TablewfIpRfOspfImportTable	not-accessible	mandatory	The list of OSPF Import Route Filter Rules in IP
1.3.6.1.4.1.18.3.5.3.2.1.10.1	RowwfIpRfOspfImportEntry	not-accessible	mandatory	An entry in the OSPF Import Route Filter Table
1.3.6.1.4.1.18.3.5.3.2.1.10.1.1	ColumnwfIpRfOspfImportCreate	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule.
1.3.6.1.4.1.18.3.5.3.2.1.10.1.2	ColumnwfIpRfOspfImportEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule.
1.3.6.1.4.1.18.3.5.3.2.1.10.1.3	ColumnwfIpRfOspfImportAddress	read-only	mandatory	The IP Address to which this filter applies
1.3.6.1.4.1.18.3.5.3.2.1.10.1.4	ColumnwfIpRfOspfImportMask	read-only	mandatory	The Mask to which this filter applies. When combined with the Address, a range is specified for application of this rule
1.3.6.1.4.1.18.3.5.3.2.1.10.1.5	ColumnwfIpRfOspfImportAction	read-write	mandatory	The Action of this Filter
1.3.6.1.4.1.18.3.5.3.2.1.10.1.6	ColumnwfIpRfOspfImportPreference	read-write	mandatory	The Preference associated with this filter - only valid if accept
1.3.6.1.4.1.18.3.5.3.2.1.10.1.7	ColumnwfIpRfOspfImportType	read-only	mandatory	The OSPF route Type to be concerned with. The valid values are null (any route type), 1 (OSPF external type 1), and 2 (OSPF external type 2).
1.3.6.1.4.1.18.3.5.3.2.1.10.1.8	ColumnwfIpRfOspfImportTag	read-only	mandatory	The OSPF Tag to be concerned with
1.3.6.1.4.1.18.3.5.3.2.1.11	TablewfIpRfOspfExportTable	not-accessible	mandatory	The list of OSPF Export Route Filter Rules in IP
1.3.6.1.4.1.18.3.5.3.2.1.11.1	RowwfIpRfOspfExportEntry	not-accessible	mandatory	An entry in the OSPF Export Route Filter Table
1.3.6.1.4.1.18.3.5.3.2.1.11.1.1	ColumnwfIpRfOspfExportCreate	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule.
1.3.6.1.4.1.18.3.5.3.2.1.11.1.2	ColumnwfIpRfOspfExportEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule.
1.3.6.1.4.1.18.3.5.3.2.1.11.1.3	ColumnwfIpRfOspfExportAddress	read-only	mandatory	The IP address to which this filter applies
1.3.6.1.4.1.18.3.5.3.2.1.11.1.4	ColumnwfIpRfOspfExportMask	read-only	mandatory	The Mask for the Address Above. When combined with the Address, a range is specified for application of this filter rule
1.3.6.1.4.1.18.3.5.3.2.1.11.1.5	ColumnwfIpRfOspfExportFromProtocol	read-only	mandatory	The protocol from which this Information is derived
1.3.6.1.4.1.18.3.5.3.2.1.11.1.6	ColumnwfIpRfOspfExportAction	read-write	mandatory	The action of this export filter
1.3.6.1.4.1.18.3.5.3.2.1.11.1.7	ColumnwfIpRfOspfExportType	read-write	mandatory	The ospf type to use when this filter matches
1.3.6.1.4.1.18.3.5.3.2.1.11.1.8	ColumnwfIpRfOspfExportTag	read-write	mandatory	The ospf tag to use when this filter matches
1.3.6.1.4.1.18.3.5.3.2.2	NodewfRipGroup
1.3.6.1.4.1.18.3.5.3.2.2.1	TablewfRipIntfTable	not-accessible	mandatory	The list of configured RIP interfaces
1.3.6.1.4.1.18.3.5.3.2.2.1.1	RowwfRipIntfEntry	not-accessible	mandatory	A description of a RIP interface
1.3.6.1.4.1.18.3.5.3.2.2.1.1.1	ColumnwfRipInterfaceCreate	read-write	mandatory	Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an RIP Interface instance.
1.3.6.1.4.1.18.3.5.3.2.2.1.1.2	ColumnwfRipInterfaceEnable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a RIP interface.
1.3.6.1.4.1.18.3.5.3.2.2.1.1.3	ColumnwfRipInterfaceState	read-only	mandatory	The current state of RIP on this interface.
1.3.6.1.4.1.18.3.5.3.2.2.1.1.4	ColumnwfRipInterfaceIndex	read-only	mandatory	The IP interface to run RIP on.
1.3.6.1.4.1.18.3.5.3.2.2.1.1.5	ColumnwfRipInterfaceSupply	read-write	mandatory	Transmit RIP packets.
1.3.6.1.4.1.18.3.5.3.2.2.1.1.6	ColumnwfRipInterfaceListen	read-write	mandatory	Whether to listen to RIP packets
1.3.6.1.4.1.18.3.5.3.2.2.1.1.7	ColumnwfRipInterfaceDefaultRouteSupply	read-write	mandatory	Transmit the default route, 0.0.0.0, in RIP packets.
1.3.6.1.4.1.18.3.5.3.2.2.1.1.8	ColumnwfRipInterfaceDefaultRouteListen	read-write	mandatory	Receive the default route, 0.0.0.0, in RIP packets.
1.3.6.1.4.1.18.3.5.3.2.2.1.1.9	ColumnwfRipInterfacePoisonedReversed	read-write	mandatory	Specifies how the router advertises routes it has learned from a neighboring router in periodic updates subsequently sent to the neighbor. If 'Poisoned', the n…
1.3.6.1.4.1.18.3.5.3.2.3	NodewfOspfGroup
1.3.6.1.4.1.18.3.5.3.2.3.1	NodewfOspfGeneralGroup
1.3.6.1.4.1.18.3.5.3.2.3.1.1	ScalarwfOspfGeneralDelete	read-write	mandatory	'This value determines whether OSPF is configured'
1.3.6.1.4.1.18.3.5.3.2.3.1.2	ScalarwfOspfGeneralDisable	read-write	mandatory	'The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it…
1.3.6.1.4.1.18.3.5.3.2.3.1.3	ScalarwfOspfGeneralState	read-only	mandatory	'The state of OSPF'
1.3.6.1.4.1.18.3.5.3.2.3.1.4	ScalarwfOspfRouterId	read-write	mandatory	'A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the…
1.3.6.1.4.1.18.3.5.3.2.3.1.5	ScalarwfOspfVersionNumber	read-only	mandatory	'The current version number of the OSPF protocol is 2.' REFERENCE 'OSPF Version 2, Title'
1.3.6.1.4.1.18.3.5.3.2.3.1.6	ScalarwfOspfAreaBdrRtrStatus	read-only	mandatory	'A flag to note whether this router is an area border router.' REFERENCE 'OSPF Version 2, Section 3 Splitting the AS into Areas'
1.3.6.1.4.1.18.3.5.3.2.3.1.7	ScalarwfOspfASBdrRtrStatus	read-write	mandatory	'A flag to note whether this router is an Autonomous System border router.' REFERENCE 'OSPF Version 2, Section 3.3 Classification of routers'
1.3.6.1.4.1.18.3.5.3.2.3.1.8	ScalarwfOspfTOSSupport	read-only	mandatory	'The router's support for type-of-service routing.' REFERENCE 'OSPF Version 2, Appendix F.1.2 Optional TOS support'
1.3.6.1.4.1.18.3.5.3.2.3.1.9	ScalarwfOspfSpfHoldDown	read-write	mandatory	Hold Down Timer for the SPF. The SPF will run at most once per hold down timer value. A value of 0 means no hold down.
1.3.6.1.4.1.18.3.5.3.2.3.1.10	ScalarwfOspfSlotMask	read-write	mandatory	Slot mask for which slots OSPF is eligible to run on. The LSBit represents slot 1, the next least significant bit represents slot 2, and so on... Slots can be …
1.3.6.1.4.1.18.3.5.3.2.3.2	TablewfOspfAreaTable	not-accessible	mandatory	'Information describing the configured parameters and cumulative statistics of the router's attached areas.' REFERENCE 'OSPF Version 2, Section 6 The Area Data…
1.3.6.1.4.1.18.3.5.3.2.3.2.1	RowwfOspfAreaEntry	not-accessible	mandatory	'Information describing the configured parameters and cumulative statistics of one of the router's attached areas.'
1.3.6.1.4.1.18.3.5.3.2.3.2.1.1	ColumnwfOspfAreaDelete	read-write	mandatory	This value determines if the OSPF router is configured with this area.
1.3.6.1.4.1.18.3.5.3.2.3.2.1.2	ColumnwfOspfAreaDisable	read-write	mandatory	This value indicates the state of this area on the OSPF router.
1.3.6.1.4.1.18.3.5.3.2.3.2.1.3	ColumnwfOspfAreaState	read-only	mandatory	This value indicates the state of the OSPF Area.
1.3.6.1.4.1.18.3.5.3.2.3.2.1.4	ColumnwfOspfAreaId	read-only	mandatory	'A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
1.3.6.1.4.1.18.3.5.3.2.3.2.1.5	ColumnwfOspfAuthType	read-write	mandatory	'The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.' REFERENCE 'OSPF Version 2, Append…
1.3.6.1.4.1.18.3.5.3.2.3.2.1.6	ColumnwfOspfImportASExtern	read-write	mandatory	'The area's support for importing AS external link- state advertisements.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
1.3.6.1.4.1.18.3.5.3.2.3.2.1.7	ColumnwfOspfStubMetric	read-write	mandatory	'The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas…
1.3.6.1.4.1.18.3.5.3.2.3.2.1.8	ColumnwfOspfImportSum	read-write	mandatory	'The area's support for importing Summary advertisements into a stub area. This variable should not be set unless wfOspfImportASExtern is set to FALSE'
1.3.6.1.4.1.18.3.5.3.2.3.3	TablewfOspfLsdbTable	not-accessible	mandatory	'The OSPF Process's Links State Database.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements'
1.3.6.1.4.1.18.3.5.3.2.3.3.1	RowwfOspfLsdbEntry	not-accessible	mandatory	'A single Link State Advertisement.'
1.3.6.1.4.1.18.3.5.3.2.3.3.1.1	ColumnwfOspfLsdbAreaId	read-only	mandatory	'The 32 bit identifier of the Area from which the LSA was received.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
1.3.6.1.4.1.18.3.5.3.2.3.3.1.2	ColumnwfOspfLsdbType	read-only	mandatory	'The type of the link state advertisement. Each link state type has a separate advertisement format.' REFERENCE 'OSPF Version 2, Appendix A.4.1 The Link State …
1.3.6.1.4.1.18.3.5.3.2.3.3.1.3	ColumnwfOspfLsdbLSID	read-only	mandatory	'The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being des…
1.3.6.1.4.1.18.3.5.3.2.3.3.1.4	ColumnwfOspfLsdbRouterId	read-only	mandatory	'The 32 bit number that uniquely identifies the originating router in the Autonomous System.' REFERENCE 'OSPF Version 2, Appendix C.1 Global parameters'
1.3.6.1.4.1.18.3.5.3.2.3.3.1.5	ColumnwfOspfLsdbSequence	read-only	mandatory	'The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linea…
1.3.6.1.4.1.18.3.5.3.2.3.3.1.6	ColumnwfOspfLsdbAge	read-only	mandatory	'This field is the age of the link state advertisement in seconds.' (OSPF_LSDBMINAGE = 0) REFERENCE 'OSPF Version 2, Section 12.1.1 LS age'
1.3.6.1.4.1.18.3.5.3.2.3.3.1.7	ColumnwfOspfLsdbChecksum	read-only	mandatory	'This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age ca…
1.3.6.1.4.1.18.3.5.3.2.3.3.1.8	ColumnwfOspfLsdbAdvLen	read-only	mandatory	'The length of entire Link State Advertisement, including its header.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements'
1.3.6.1.4.1.18.3.5.3.2.3.4	TablewfOspfAreaRangeTable	not-accessible	mandatory	'A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 incl…
1.3.6.1.4.1.18.3.5.3.2.3.4.1	RowwfOspfAreaRangeEntry	not-accessible	mandatory
1.3.6.1.4.1.18.3.5.3.2.3.4.1.1	ColumnwfOspfAreaRangeDelete	read-write	mandatory	This value determines if an Area Range has been configured for the OSPF router.
1.3.6.1.4.1.18.3.5.3.2.3.4.1.2	ColumnwfOspfAreaRangeDisable	read-write	mandatory	'This variable displays the status of the entry. Setting it to 'DISBALED' has the effect of rendering it inoperative. The internal effect (row removal) is impl…
1.3.6.1.4.1.18.3.5.3.2.3.4.1.3	ColumnwfOspfAreaRangeState	read-only	mandatory	The state of the OSPF Area Range.
1.3.6.1.4.1.18.3.5.3.2.3.4.1.4	ColumnwfOspfAreaRangeAreaID	read-only	mandatory	'The Area the Address Range is to be found within.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
1.3.6.1.4.1.18.3.5.3.2.3.4.1.5	ColumnwfOspfAreaRangeNet	read-only	mandatory	'The IP Address of the Net or Subnet indicated by the range.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
1.3.6.1.4.1.18.3.5.3.2.3.4.1.6	ColumnwfOspfAreaRangeMask	read-write	mandatory	'The Subnet Mask that pertains to the Net or Subnet.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
1.3.6.1.4.1.18.3.5.3.2.3.5	TablewfOspfIfTable	not-accessible	mandatory	'The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.' REFERENCE 'OSPF Version 2, Appendix C.3 Router interface parameters'
1.3.6.1.4.1.18.3.5.3.2.3.5.1	RowwfOspfIfEntry	not-accessible	mandatory	'The OSPF Interface Entry describes one interface from the viewpoint of OSPF.'
1.3.6.1.4.1.18.3.5.3.2.3.5.1.1	ColumnwfOspfIfDelete	read-write	mandatory	This variable determines in an OSPF Interface has been configured on the router.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.2	ColumnwfOspfIfDisable	read-write	mandatory	'The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be …
1.3.6.1.4.1.18.3.5.3.2.3.5.1.3	ColumnwfOspfIfState	read-only	mandatory	'The OSPF Interface State.' down (1), loopback (2), waiting (3), pointToPoint (4), designatedRouter (5), backupDesignatedRouter (6), otherDesignatedRouter (7)
1.3.6.1.4.1.18.3.5.3.2.3.5.1.4	ColumnwfOspfIfIpAddress	read-only	mandatory	'The IP address of this OSPF interface.'
1.3.6.1.4.1.18.3.5.3.2.3.5.1.5	ColumnwfOspfAddressLessIf	read-only	mandatory	'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the cor…
1.3.6.1.4.1.18.3.5.3.2.3.5.1.6	ColumnwfOspfIfAreaId	read-write	mandatory	'A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.' default { '00000000'H }
1.3.6.1.4.1.18.3.5.3.2.3.5.1.7	ColumnwfOspfIfType	read-write	mandatory	'The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802…
1.3.6.1.4.1.18.3.5.3.2.3.5.1.8	ColumnwfOspfIfRtrPriority	read-write	mandatory	'The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the …
1.3.6.1.4.1.18.3.5.3.2.3.5.1.9	ColumnwfOspfIfTransitDelay	read-write	mandatory	'The estimated number of seconds it takes to transmit a link- state update packet over this interface.'
1.3.6.1.4.1.18.3.5.3.2.3.5.1.10	ColumnwfOspfIfRetransInterval	read-write	mandatory	'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitti…
1.3.6.1.4.1.18.3.5.3.2.3.5.1.11	ColumnwfOspfIfHelloInterval	read-write	mandatory	'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a co…
1.3.6.1.4.1.18.3.5.3.2.3.5.1.12	ColumnwfOspfIfRtrDeadInterval	read-write	mandatory	'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hell…
1.3.6.1.4.1.18.3.5.3.2.3.5.1.13	ColumnwfOspfIfPollInterval	read-write	mandatory	'The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor.'
1.3.6.1.4.1.18.3.5.3.2.3.5.1.14	ColumnwfOspfIfDesignatedRouter	read-only	mandatory	'The IP Address of the Designated Router.' default { '00000000'H }
1.3.6.1.4.1.18.3.5.3.2.3.5.1.15	ColumnwfOspfIfBackupDesignatedRouter	read-only	mandatory	'The IP Address of the Backup Designated Router.' default { '00000000'H }
1.3.6.1.4.1.18.3.5.3.2.3.5.1.16	ColumnwfOspfIfMetricCost	read-write	mandatory	'The cost of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no…
1.3.6.1.4.1.18.3.5.3.2.3.5.1.17	ColumnwfOspfIfAuthKey	read-write	mandatory	'The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero f…
1.3.6.1.4.1.18.3.5.3.2.3.5.1.18	ColumnwfOspfIfTxHellos	read-only	mandatory	Number of OSPF Hello packets transmitted.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.19	ColumnwfOspfIfTxDBDescripts	read-only	mandatory	Number of OSPF DataBase Description packets transmitted.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.20	ColumnwfOspfIfTxLinkStateReqs	read-only	mandatory	Number of OSPF Link State Request packets transmitted.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.21	ColumnwfOspfIfTxLinkStateUpds	read-only	mandatory	Number of OSPF Link State Update packets transmitted.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.22	ColumnwfOspfIfTxLinkStateAcks	read-only	mandatory	Number of OSPF Link States Acknowledgements transmitted.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.23	ColumnwfOspfIfRxHellos	read-only	mandatory	Number of OSPF Hello packets received.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.24	ColumnwfOspfIfRxDBDescripts	read-only	mandatory	Number of OSPF DataBase Description packets received.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.25	ColumnwfOspfIfRxLinkStateReqs	read-only	mandatory	Number of OSPF Link State Requests received.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.26	ColumnwfOspfIfRxLinkStateUpds	read-only	mandatory	Number of OSPF Link State Updates received.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.27	ColumnwfOspfIfRxLinkStateAcks	read-only	mandatory	Number of OSPF Link State Acknowledgements received.
1.3.6.1.4.1.18.3.5.3.2.3.5.1.28	ColumnwfOspfIfDrops	read-only	mandatory	Number of OSPF packets dropped because of invalid information in the packet.
1.3.6.1.4.1.18.3.5.3.2.3.6	TablewfOspfVirtIfTable	not-accessible	mandatory	'Information about this router's virtual interfaces.' REFERENCE 'OSPF Version 2, Appendix C.4 Virtual link parameters'
1.3.6.1.4.1.18.3.5.3.2.3.6.1	RowwfOspfVirtIfEntry	not-accessible	mandatory	'Information about a single Virtual Interface.'
1.3.6.1.4.1.18.3.5.3.2.3.6.1.1	ColumnwfOspfVirtIfDelete	read-write	mandatory
1.3.6.1.4.1.18.3.5.3.2.3.6.1.2	ColumnwfOspfVirtIfDisable	read-write	mandatory	'This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row r…
1.3.6.1.4.1.18.3.5.3.2.3.6.1.3	ColumnwfOspfVirtIfState	read-only	mandatory	'OSPF virtual interface states.' down (1), pointToPoint (4)
1.3.6.1.4.1.18.3.5.3.2.3.6.1.4	ColumnwfOspfVirtIfAreaID	read-only	mandatory	'The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0'
1.3.6.1.4.1.18.3.5.3.2.3.6.1.5	ColumnwfOspfVirtIfNeighbor	read-only	mandatory	'The Router ID of the Virtual Neighbor.'
1.3.6.1.4.1.18.3.5.3.2.3.6.1.6	ColumnwfOspfVirtIfTransitDelay	read-write	mandatory	'The estimated number of seconds it takes to transmit a link- state update packet over this interface.'
1.3.6.1.4.1.18.3.5.3.2.3.6.1.7	ColumnwfOspfVirtIfRetransInterval	read-write	mandatory	'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitti…
1.3.6.1.4.1.18.3.5.3.2.3.6.1.8	ColumnwfOspfVirtIfHelloInterval	read-write	mandatory	'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.'
1.3.6.1.4.1.18.3.5.3.2.3.6.1.9	ColumnwfOspfVirtIfRtrDeadInterval	read-write	mandatory	'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hell…
1.3.6.1.4.1.18.3.5.3.2.3.6.1.10	ColumnwfOspfVirtIfAuthKey	read-write	mandatory	'If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, ospfVifAuthKey always returns a string of length z…
1.3.6.1.4.1.18.3.5.3.2.3.6.1.11	ColumnwfOspfVirtIfTxHellos	read-only	mandatory	Number of OSPF Hello packets transmitted on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.6.1.12	ColumnwfOspfVirtIfTxDBDescripts	read-only	mandatory	Number of OSPF DataBase Description packets transmitted on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.6.1.13	ColumnwfOspfVirtIfTxLinkStateReqs	read-only	mandatory	Number of OSPF Link State Request packets transmitted on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.6.1.14	ColumnwfOspfVirtIfTxLinkStateUpds	read-only	mandatory	Number of OSPF Link State Update packets transmitted on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.6.1.15	ColumnwfOspfVirtIfTxLinkStateAcks	read-only	mandatory	Number of OSPF Link State Acknowledgement packets transmitted on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.6.1.16	ColumnwfOspfVirtIfRxHellos	read-only	mandatory	Number of OSPF Hello packets received on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.6.1.17	ColumnwfOspfVirtIfRxDBDescripts	read-only	mandatory	Number of OSPF DataBase Description packets received on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.6.1.18	ColumnwfOspfVirtIfRxLinkStateReqs	read-only	mandatory	Number of OSPF Link State Request packets recieved on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.6.1.19	ColumnwfOspfVirtIfRxLinkStateUpds	read-only	mandatory	Number of OSPF Link State Update packets received on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.6.1.20	ColumnwfOspfVirtIfRxLinkStateAcks	read-only	mandatory	Number of OSPF Link State Acknowledgement packets received on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.6.1.21	ColumnwfOspfVirtIfDrops	read-only	mandatory	Number of OSPF packets dropped on Virtual Interfaces.
1.3.6.1.4.1.18.3.5.3.2.3.7	TablewfOspfNbrTable	not-accessible	mandatory	'A table of non-virtual neighbor information.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure'
1.3.6.1.4.1.18.3.5.3.2.3.7.1	RowwfOspfNbrEntry	not-accessible	mandatory	'The information regarding a single neighbor.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure'
1.3.6.1.4.1.18.3.5.3.2.3.7.1.1	ColumnwfOspfNbrDelete	read-write	mandatory	This variable indicates the existence of a static OSPF neighbor.
1.3.6.1.4.1.18.3.5.3.2.3.7.1.2	ColumnwfOspfNbrDisable	read-write	mandatory	'This variable displays the status of the entry. Setting it to 'DISABLED' has the effect of rendering it inoperative. The internal effect (row removal) is impl…
1.3.6.1.4.1.18.3.5.3.2.3.7.1.3	ColumnwfOspfNbrState	read-only	mandatory	'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), excha…
1.3.6.1.4.1.18.3.5.3.2.3.7.1.4	ColumnwfOspfNbrIpAddr	read-only	mandatory	'The IP address of this neighbor.'
1.3.6.1.4.1.18.3.5.3.2.3.7.1.5	ColumnwfOspfNbrIfAddr	read-write	mandatory	'The Interface IP address for this neighbor.'
1.3.6.1.4.1.18.3.5.3.2.3.7.1.6	ColumnwfOspfNbrAddressLessIndex	read-only	mandatory	' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this…
1.3.6.1.4.1.18.3.5.3.2.3.7.1.7	ColumnwfOspfNbrRtrId	read-only	mandatory	'A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.' default { '00000000'H }
1.3.6.1.4.1.18.3.5.3.2.3.7.1.8	ColumnwfOspfNbrOptions	read-only	mandatory	'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is …
1.3.6.1.4.1.18.3.5.3.2.3.7.1.9	ColumnwfOspfNbrPriority	read-write	mandatory	'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated ro…
1.3.6.1.4.1.18.3.5.3.2.3.7.1.10	ColumnwfOspfNbrEvents	read-only	mandatory	'The number of times this neighbor relationship has changed state, or an error has occurred.'
1.3.6.1.4.1.18.3.5.3.2.3.7.1.11	ColumnwfOspfNbrLSRetransQLen	read-only	mandatory	'The current length of the retransmission queue.'
1.3.6.1.4.1.18.3.5.3.2.3.8	TablewfOspfVirtNbrTable	not-accessible	mandatory	'A table of virtual neighbor information.' REFERENCE 'OSPF Version 2, '
1.3.6.1.4.1.18.3.5.3.2.3.8.1	RowwfOspfVirtNbrEntry	not-accessible	mandatory	'Virtual neighbor information.' REFERENCE 'OSPF Version 2, '
1.3.6.1.4.1.18.3.5.3.2.3.8.1.1	ColumnwfOspfVirtNbrArea	read-only	mandatory	'The Transit Area Identifier.'
1.3.6.1.4.1.18.3.5.3.2.3.8.1.2	ColumnwfOspfVirtNbrRtrId	read-only	mandatory	'A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.'
1.3.6.1.4.1.18.3.5.3.2.3.8.1.3	ColumnwfOspfVirtNbrIpAddr	read-only	mandatory	'The IP address this Virtual Neighbor is using.'
1.3.6.1.4.1.18.3.5.3.2.3.8.1.4	ColumnwfOspfVirtNbrOptions	read-only	mandatory	'A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metric…
1.3.6.1.4.1.18.3.5.3.2.3.8.1.5	ColumnwfOspfVirtNbrState	read-only	mandatory	'The state of the Virtual Neighbor Relationship.' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8)
1.3.6.1.4.1.18.3.5.3.2.3.8.1.6	ColumnwfOspfVirtNbrEvents	read-only	mandatory	'The number of times this virtual link has changed its state, or an error has occurred.'
1.3.6.1.4.1.18.3.5.3.2.3.8.1.7	ColumnwfOspfVirtNbrLSRetransQLen	read-only	mandatory	'The current length of the retransmission queue.'
1.3.6.1.4.1.18.3.5.3.2.3.9	TablewfOspfDynNbrTable	not-accessible	mandatory	'A table of non-virtual neighbor information.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure'
1.3.6.1.4.1.18.3.5.3.2.3.9.1	RowwfOspfDynNbrEntry	not-accessible	mandatory	'The information regarding a single neighbor.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure'
1.3.6.1.4.1.18.3.5.3.2.3.9.1.1	ColumnwfOspfDynNbrState	read-only	mandatory	'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), excha…
1.3.6.1.4.1.18.3.5.3.2.3.9.1.2	ColumnwfOspfDynNbrIpAddr	read-only	mandatory	'The IP address of this neighbor.'
1.3.6.1.4.1.18.3.5.3.2.3.9.1.3	ColumnwfOspfDynNbrIfAddr	read-only	mandatory	'The Interface IP address for this neighbor.'
1.3.6.1.4.1.18.3.5.3.2.3.9.1.4	ColumnwfOspfDynNbrAddressLessIndex	read-only	mandatory	' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this…
1.3.6.1.4.1.18.3.5.3.2.3.9.1.5	ColumnwfOspfDynNbrRtrId	read-only	mandatory	'A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.' default { '00000000'H }
1.3.6.1.4.1.18.3.5.3.2.3.9.1.6	ColumnwfOspfDynNbrOptions	read-only	mandatory	'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is …
1.3.6.1.4.1.18.3.5.3.2.3.9.1.7	ColumnwfOspfDynNbrPriority	read-only	mandatory	'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated ro…
1.3.6.1.4.1.18.3.5.3.2.3.9.1.8	ColumnwfOspfDynNbrEvents	read-only	mandatory	'The number of times this neighbor relationship has changed state, or an error has occurred.'
1.3.6.1.4.1.18.3.5.3.2.3.9.1.9	ColumnwfOspfDynNbrLSRetransQLen	read-only	mandatory	'The current length of the retransmission queue.'
1.3.6.1.4.1.18.3.5.3.2.4	NodewfEgpGroup
1.3.6.1.4.1.18.3.5.3.2.5	NodewfBgpGroup
1.3.6.1.4.1.18.3.5.3.3	NodewfTcpGroup
1.3.6.1.4.1.18.3.5.3.4	NodewfUdpGroup
1.3.6.1.4.1.18.3.5.3.5	NodewfSnmpGroup
1.3.6.1.4.1.18.3.5.3.5.1	NodewfSnmp
1.3.6.1.4.1.18.3.5.3.5.1.1	ScalarwfSnmpDisable	read-write	mandatory	Enables or disables the SNMP subsystem
1.3.6.1.4.1.18.3.5.3.5.1.2	ScalarwfSnmpUseLock	read-write	mandatory	Flag to indicate whether locking mechanism is enabled or disabled
1.3.6.1.4.1.18.3.5.3.5.1.3	ScalarwfSnmpLockAddress	read-write	mandatory	Address of remote manager that is enforcing the lock. This value is set by the SNMP agent. Remote managers are only allowed to clear it.
1.3.6.1.4.1.18.3.5.3.5.1.4	ScalarwfSnmpLockTimeOut	read-write	mandatory	The maximum time (in minutes) a lock can be idle before it is cleared.
1.3.6.1.4.1.18.3.5.3.5.1.5	ScalarwfSnmpAuth	read-write	mandatory	The type of authentication used by the agent
1.3.6.1.4.1.18.3.5.3.5.1.6	ScalarwfSnmpInPkts	read-only	mandatory	Total number of PDUs received by SNMP from transport entity
1.3.6.1.4.1.18.3.5.3.5.1.7	ScalarwfSnmpOutPkts	read-only	mandatory	Total number of PDUs sent by SNMP to transport entity
1.3.6.1.4.1.18.3.5.3.5.1.8	ScalarwfSnmpInBadVersions	read-only	mandatory	Total number of PDUs requesting unsupported versions
1.3.6.1.4.1.18.3.5.3.5.1.9	ScalarwfSnmpInBadCommunityNames	read-only	mandatory	Total number of PDUs which had an invalid community string
1.3.6.1.4.1.18.3.5.3.5.1.10	ScalarwfSnmpInBadCommunityUses	read-only	mandatory	Total number of PDUs requesting an operation unsupported by the community
1.3.6.1.4.1.18.3.5.3.5.1.11	ScalarwfSnmpInASNParseErrs	read-only	mandatory	Total number of ASN.1 parsing errors during decoding
1.3.6.1.4.1.18.3.5.3.5.1.12	ScalarwfSnmpInBadTypes	read-only	mandatory	Total number of PDUs having an unknown PDU type
1.3.6.1.4.1.18.3.5.3.5.1.13	ScalarwfSnmpInTooBigs	read-only	mandatory	Total number of PDUs delivered with ErrorStatus='tooBig'
1.3.6.1.4.1.18.3.5.3.5.1.14	ScalarwfSnmpInNoSuchNames	read-only	mandatory	Total number of PDUs delivered with ErrorStatus='noSuchName'
1.3.6.1.4.1.18.3.5.3.5.1.15	ScalarwfSnmpInBadValues	read-only	mandatory	Total number of PDUs delivered with ErrorStatus='badValue'
1.3.6.1.4.1.18.3.5.3.5.1.16	ScalarwfSnmpInReadOnlys	read-only	mandatory	Total number of PDUs delivered with ErrorStatus='readOnly'
1.3.6.1.4.1.18.3.5.3.5.1.17	ScalarwfSnmpInGenErrs	read-only	mandatory	Total number of PDUs delivered with ErrorStatus='genErr'
1.3.6.1.4.1.18.3.5.3.5.1.18	ScalarwfSnmpInTotalReqVars	read-only	mandatory	Total number of MIB objects retrieved successfully by the agent
1.3.6.1.4.1.18.3.5.3.5.1.19	ScalarwfSnmpInTotalSetVars	read-only	mandatory	Total number of MIB objects which have been SET successfully
1.3.6.1.4.1.18.3.5.3.5.1.20	ScalarwfSnmpInGetRequests	read-only	mandatory	Total number of Get-Request PDUS accepted and processed
1.3.6.1.4.1.18.3.5.3.5.1.21	ScalarwfSnmpInGetNexts	read-only	mandatory	Total number of GetNext-Request PDUS accepted and processed
1.3.6.1.4.1.18.3.5.3.5.1.22	ScalarwfSnmpInSetRequests	read-only	mandatory	Total number of Set-Request PDUS accepted and processed
1.3.6.1.4.1.18.3.5.3.5.1.23	ScalarwfSnmpInGetResponses	read-only	mandatory	Total number of GetResponse PDUs accepted and processed
1.3.6.1.4.1.18.3.5.3.5.1.24	ScalarwfSnmpInTraps	read-only	mandatory	Total number of Trap PDUs accepted and processed
1.3.6.1.4.1.18.3.5.3.5.1.25	ScalarwfSnmpOutTooBigs	read-only	mandatory	Total number of PDUs generated by the agent with ErrorStatus='tooBig'
1.3.6.1.4.1.18.3.5.3.5.1.26	ScalarwfSnmpOutNoSuchNames	read-only	mandatory	Total number of PDUs generated by the agent with ErrorStatus='noSuchName'
1.3.6.1.4.1.18.3.5.3.5.1.27	ScalarwfSnmpOutBadValues	read-only	mandatory	Total number of PDUs generated by the agent with ErrorStatus='badValue'
1.3.6.1.4.1.18.3.5.3.5.1.28	ScalarwfSnmpOutReadOnlys	read-only	mandatory	Total number of PDUs generated by the agent with ErrorStatus='readOnly'
1.3.6.1.4.1.18.3.5.3.5.1.29	ScalarwfSnmpOutGenErrs	read-only	mandatory	Total number of PDUs generated by the agent with ErrorStatus='genErr'
1.3.6.1.4.1.18.3.5.3.5.1.30	ScalarwfSnmpOutGetRequests	read-only	mandatory	Total number of Get-Request PDUs generated by the agent
1.3.6.1.4.1.18.3.5.3.5.1.31	ScalarwfSnmpOutGetNexts	read-only	mandatory	Total number of Get-Next-Request PDUs generated by the agent
1.3.6.1.4.1.18.3.5.3.5.1.32	ScalarwfSnmpOutSetRequests	read-only	mandatory	Total number of Set-Request PDUs generated by the agent
1.3.6.1.4.1.18.3.5.3.5.1.33	ScalarwfSnmpOutGetResponses	read-only	mandatory	Total number of Get-Response PDUs generated by the agent
1.3.6.1.4.1.18.3.5.3.5.1.34	ScalarwfSnmpOutTraps	read-only	mandatory	Total number of Trap PDUs generated by the agent
1.3.6.1.4.1.18.3.5.3.5.1.35	ScalarwfSnmpEnableAuthTraps	read-write	mandatory	Idicates whether agent can generate Authentication Failure Traps
1.3.6.1.4.1.18.3.5.3.5.1.36	ScalarwfSnmpTrapDebug	read-write	mandatory	This attribute controls the specific trap filter for debug messages
1.3.6.1.4.1.18.3.5.3.5.1.37	ScalarwfSnmpTrapTrace	read-write	mandatory	This attribute controls the specific trap filter for trace messages
1.3.6.1.4.1.18.3.5.3.5.1.38	ScalarwfSnmpTrapInfo	read-write	mandatory	This attribute controls the specific trap filter for informational messages
1.3.6.1.4.1.18.3.5.3.5.1.39	ScalarwfSnmpTrapWarn	read-write	mandatory	This attribute controls the specific trap filter for warning messages
1.3.6.1.4.1.18.3.5.3.5.1.40	ScalarwfSnmpTrapFault	read-write	mandatory	This attribute controls the specific trap filter for fault messages
1.3.6.1.4.1.18.3.5.3.5.2	TablewfSnmpCommTable	not-accessible	mandatory	A table containing valid management communities
1.3.6.1.4.1.18.3.5.3.5.2.1	RowwfSnmpCommEntry	not-accessible	mandatory	Information about a particular community
1.3.6.1.4.1.18.3.5.3.5.2.1.1	ColumnwfSnmpCommDelete	read-write	mandatory	A flag to indicate community instance deletion
1.3.6.1.4.1.18.3.5.3.5.2.1.2	ColumnwfSnmpCommIndex	read-only	mandatory	A unique numeric value that has a one to one correspondence with the community name
1.3.6.1.4.1.18.3.5.3.5.2.1.3	ColumnwfSnmpCommName	read-write	mandatory	Community name
1.3.6.1.4.1.18.3.5.3.5.2.1.4	ColumnwfSnmpCommAccess	read-write	mandatory	Community access mode
1.3.6.1.4.1.18.3.5.3.5.3	TablewfSnmpMgrTable	not-accessible	mandatory	A table containing managers and their respective communities
1.3.6.1.4.1.18.3.5.3.5.3.1	RowwfSnmpMgrEntry	not-accessible	mandatory	Information about a manager of a community
1.3.6.1.4.1.18.3.5.3.5.3.1.1	ColumnwfSnmpMgrDelete	read-write	mandatory	A flag to indicate manager instance deletion */
1.3.6.1.4.1.18.3.5.3.5.3.1.2	ColumnwfSnmpMgrCommIndex	read-only	mandatory	Associates this manager with a community in the community table
1.3.6.1.4.1.18.3.5.3.5.3.1.3	ColumnwfSnmpMgrAddress	read-only	mandatory	IP Address of this manager
1.3.6.1.4.1.18.3.5.3.5.3.1.4	ColumnwfSnmpMgrName	read-write	mandatory	A name for this manager
1.3.6.1.4.1.18.3.5.3.5.3.1.5	ColumnwfSnmpMgrTrapPort	read-write	mandatory	The UDP Port on which this manager is listening for traps
1.3.6.1.4.1.18.3.5.3.5.3.1.6	ColumnwfSnmpMgrTraps	read-write	mandatory	Allowable Traps to be sent to Manager, defaults to only generic trap types
1.3.6.1.4.1.18.3.5.3.5.4	NodewfFakeEvent
1.3.6.1.4.1.18.3.5.3.5.4.1	ScalarwfFakeEventString	read-only	optional	A dummy display string. While no string will actually be kept here, the full identifier (object id + attribute id + instance ID ) will be used to wrap event st…
1.3.6.1.4.1.18.3.5.3.6	NodewfTftp
1.3.6.1.4.1.18.3.5.3.6.1	ScalarwfTftpDisable	read-write	mandatory	Enables or Disables TFTP Subsystem
1.3.6.1.4.1.18.3.5.3.6.2	ScalarwfTftpDefaultVolume	read-write	mandatory	The file system volume number to which transferred files will be written and from which they will be retrieved. The volume number corresponds to the slot numbe…
1.3.6.1.4.1.18.3.5.3.6.3	ScalarwfTftpXfers	read-only	mandatory	Number of Transfers in Progress
1.3.6.1.4.1.18.3.5.3.6.4	ScalarwfTftpTimeOut	read-write	mandatory	General Retransmission time-out value (seconds)
1.3.6.1.4.1.18.3.5.3.6.5	ScalarwfTftpCloseTimeOut	read-write	mandatory	Retransmission time-out value for sender of final ACK (seconds)
1.3.6.1.4.1.18.3.5.3.6.6	ScalarwfTftpRexmit	read-write	mandatory	Maximum Number of Retransmissions
1.3.6.1.4.1.18.3.5.3.6.7	ScalarwfTftpInFiles	read-only	mandatory	Number of files Successfully received
1.3.6.1.4.1.18.3.5.3.6.8	ScalarwfTftpOutFiles	read-only	mandatory	Number of files Successfully sent
1.3.6.1.4.1.18.3.5.3.6.9	ScalarwfTftpInWRQ	read-only	mandatory	Number of write requests received
1.3.6.1.4.1.18.3.5.3.6.10	ScalarwfTftpOutWRQ	read-only	mandatory	Number of write requests sent
1.3.6.1.4.1.18.3.5.3.6.11	ScalarwfTftpInRRQ	read-only	mandatory	Number of read requests received
1.3.6.1.4.1.18.3.5.3.6.12	ScalarwfTftpOutRRQ	read-only	mandatory	Number of read requests sent
1.3.6.1.4.1.18.3.5.3.6.13	ScalarwfTftpRexmitPkts	read-only	mandatory	Number of Re-transmitted packets
1.3.6.1.4.1.18.3.5.3.6.14	ScalarwfTftpInErr	read-only	mandatory	Number of Error PDUs Received
1.3.6.1.4.1.18.3.5.3.6.15	ScalarwfTftpOutErr	read-only	mandatory	Number of Error PDUs Sent
1.3.6.1.4.1.18.3.5.3.6.16	ScalarwfTftpAborts	read-only	mandatory	Number of Aborted Pseudo Connections
1.3.6.1.4.1.18.3.5.3.7	NodewfTelnetGroup
1.3.6.1.4.1.18.3.5.3.8	NodewfBootpGroup
1.3.6.1.4.1.18.3.5.4	NodewfAppletalkGroup
1.3.6.1.4.1.18.3.5.4.1	NodewfAppleBase
1.3.6.1.4.1.18.3.5.4.1.1	ScalarwfAppleBaseDelete	read-write	mandatory	Create/Delete parameter for determining whether or not AppleTalk is configured on this slot.
1.3.6.1.4.1.18.3.5.4.1.2	ScalarwfAppleBaseDisable	read-write	mandatory	Enable/Disable parameter for determining whether or not to startup AppleTalk.
1.3.6.1.4.1.18.3.5.4.1.3	ScalarwfAppleBaseState	read-only	mandatory	This parameter relfects the current state of AppleTalk.
1.3.6.1.4.1.18.3.5.4.1.4	ScalarwfAppleBaseDebugLevel	read-write	mandatory	Appletalk has control of what debug and info messages are printed.
1.3.6.1.4.1.18.3.5.4.1.5	ScalarwfAppleBaseDdpQueLen	read-write	mandatory	Queue clipping is done on all packets destined for the port. This is the length of the queue.
1.3.6.1.4.1.18.3.5.4.1.6	ScalarwfAppleBaseHomedPort	read-write	mandatory	The circuit number of the port on which NBP will register this router.
1.3.6.1.4.1.18.3.5.4.1.7	ScalarwfAppleBaseTotalNets	read-only	mandatory	The circuit number of the port on which NBP will register this router.
1.3.6.1.4.1.18.3.5.4.1.8	ScalarwfAppleBaseTotalZones	read-only	mandatory	The circuit number of the port on which NBP will register this router.
1.3.6.1.4.1.18.3.5.4.2	TablewfAppleRtmpTable	not-accessible	mandatory	The table of elements of AppleTalk's routing RTMP table
1.3.6.1.4.1.18.3.5.4.2.1	RowwfAppleRtmpEntry	not-accessible	mandatory	An entry in the Routing table
1.3.6.1.4.1.18.3.5.4.2.1.1	ColumnwfAppleRtmpNetStart	read-only	mandatory	The destinatination network range of this route to which this entry pertains. The route is considered the best route to that network. There wil only be one rou…
1.3.6.1.4.1.18.3.5.4.2.1.2	ColumnwfAppleRtmpNetEnd	read-only	mandatory	The network max in the destination network range to which the routing entry pertains.
1.3.6.1.4.1.18.3.5.4.2.1.3	ColumnwfAppleRtmpPort	read-only	mandatory	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu…
1.3.6.1.4.1.18.3.5.4.2.1.4	ColumnwfAppleRtmpHops	read-only	mandatory	The routing metric to get to this destination network. The measurement is in terms of hops.
1.3.6.1.4.1.18.3.5.4.2.1.5	ColumnwfAppleRtmpNextHopNet	read-only	mandatory	The AppleTalk net of the next hop router for this route.
1.3.6.1.4.1.18.3.5.4.2.1.6	ColumnwfAppleRtmpNextHopNode	read-only	mandatory	The AppleTalk node of the next hop router for this route.
1.3.6.1.4.1.18.3.5.4.2.1.7	ColumnwfAppleRtmpState	read-write	mandatory	The state of this routing entry: (G)ood, (S)uspect, (GB) GoingBad, or (B)ad. Setting this object to the value bad(4) has the effect of invalidating the corresp…
1.3.6.1.4.1.18.3.5.4.3	TablewfApplePortTable	not-accessible	mandatory	The port descriptor table that describes the configuration parameters for this port of the AppleTalk Router.
1.3.6.1.4.1.18.3.5.4.3.1	RowwfApplePortEntry	not-accessible	mandatory	An entry in the Port Descriptor table
1.3.6.1.4.1.18.3.5.4.3.1.1	ColumnwfApplePortDelete	read-write	mandatory	Create/Delete parameter. Users perform an SNMP SET operation on this object to create/delete an AppleTalk interface. The default is create.
1.3.6.1.4.1.18.3.5.4.3.1.2	ColumnwfApplePortDisable	read-write	mandatory	Enable/Disable parameter. Users perforn an SNMP SET operation on this object to enable/disable an AppleTalk interface. Default is enabled.
1.3.6.1.4.1.18.3.5.4.3.1.3	ColumnwfApplePortCircuit	read-only	mandatory	The circuit number for this interface
1.3.6.1.4.1.18.3.5.4.3.1.4	ColumnwfApplePortState	read-only	mandatory	The current state of the AppleTalk port.
1.3.6.1.4.1.18.3.5.4.3.1.5	ColumnwfApplePortType	read-only	mandatory	The type for the port
1.3.6.1.4.1.18.3.5.4.3.1.6	ColumnwfApplePortCksumDisable	read-write	mandatory	Flag to enable/disable the calculation of the DDP checksum for packets sourced by the router over this interface. This value has no effect on incoming packets.
1.3.6.1.4.1.18.3.5.4.3.1.7	ColumnwfApplePortTrEndStation	read-write	mandatory	When an interface is running token ring this attribute allows for end station source routing. If the interface is not running token ring the attribute has no m…
1.3.6.1.4.1.18.3.5.4.3.1.8	ColumnwfApplePortGniForever	read-write	mandatory	During initialization default behavior is to send 3 GetNetInfos and then shut down the port. This will send GetNetInfos forever.
1.3.6.1.4.1.18.3.5.4.3.1.9	ColumnwfApplePortAarpFlush	read-only	mandatory	Setting this to a non-null value causes the aarp table to be emptied of all entries.
1.3.6.1.4.1.18.3.5.4.3.1.10	ColumnwfApplePortMacAddress	read-write	mandatory	Configured mac address
1.3.6.1.4.1.18.3.5.4.3.1.11	ColumnwfApplePortNodeId	read-write	mandatory	The AppleTalk node id configured for this port/interface.
1.3.6.1.4.1.18.3.5.4.3.1.12	ColumnwfApplePortNetwork	read-write	mandatory	The Network NUMBER for this interface/port.
1.3.6.1.4.1.18.3.5.4.3.1.13	ColumnwfApplePortNetStart	read-write	mandatory	The Network start value in the network range for this interface/port.
1.3.6.1.4.1.18.3.5.4.3.1.14	ColumnwfApplePortNetEnd	read-write	mandatory	The Network end value in the network range for this interface/port.
1.3.6.1.4.1.18.3.5.4.3.1.15	ColumnwfApplePortDfltZone	read-write	mandatory	The default zone name for this network range/ interface.
1.3.6.1.4.1.18.3.5.4.3.1.16	ColumnwfApplePortCurMacAddress	read-only	mandatory	Mac Address used
1.3.6.1.4.1.18.3.5.4.3.1.17	ColumnwfApplePortCurNodeId	read-only	mandatory	The AppleTalk node id of this port
1.3.6.1.4.1.18.3.5.4.3.1.18	ColumnwfApplePortCurNetwork	read-only	mandatory	The network number for this port.
1.3.6.1.4.1.18.3.5.4.3.1.19	ColumnwfApplePortCurNetStart	read-only	mandatory	The Network start value in the network range for this port.
1.3.6.1.4.1.18.3.5.4.3.1.20	ColumnwfApplePortCurNetEnd	read-only	mandatory	The Network end value in the network range for this port.
1.3.6.1.4.1.18.3.5.4.3.1.21	ColumnwfApplePortCurDfltZone	read-only	mandatory	The default zone name for this port
1.3.6.1.4.1.18.3.5.4.3.1.22	ColumnwfApplePortAarpProbeRxs	read-only	mandatory	The number of AARP Probe packets received on this interface.
1.3.6.1.4.1.18.3.5.4.3.1.23	ColumnwfApplePortAarpProbeTxs	read-only	mandatory	The number of AARP Probe packets transmitted on this interface.
1.3.6.1.4.1.18.3.5.4.3.1.24	ColumnwfApplePortAarpReqRxs	read-only	mandatory	The number of AARP Request packets received on this interface.
1.3.6.1.4.1.18.3.5.4.3.1.25	ColumnwfApplePortAarpReqTxs	read-only	mandatory	The number of AARP Request packets transmitted on this interface.
1.3.6.1.4.1.18.3.5.4.3.1.26	ColumnwfApplePortAarpRspRxs	read-only	mandatory	The number of AARP Response packets received on this interface.
1.3.6.1.4.1.18.3.5.4.3.1.27	ColumnwfApplePortAarpRspTxs	read-only	mandatory	The number of AARP Response packets transmitted on this interface.
1.3.6.1.4.1.18.3.5.4.3.1.28	ColumnwfApplePortDdpOutRequests	read-only	mandatory	The total number of DDP datagrams which were supplied to DDP by local DDP clients in requests for transmission. Note that this counter does not include any dat…
1.3.6.1.4.1.18.3.5.4.3.1.29	ColumnwfApplePortDdpInReceives	read-only	mandatory	The total number of input datagrams received by DDP, including those received in error.
1.3.6.1.4.1.18.3.5.4.3.1.30	ColumnwfApplePortDdpInLocalDatagrams	read-only	mandatory	The total number of input DDP datagrams for which this entity was their final DDP destination.
1.3.6.1.4.1.18.3.5.4.3.1.31	ColumnwfApplePortDdpNoProtocolHandlers	read-only	mandatory	The total number of DDP datagrams addressed to this entity that were addressed to an upper layer protocol for which no protocol handler existed.
1.3.6.1.4.1.18.3.5.4.3.1.32	ColumnwfApplePortDdpTooShortErrors	read-only	mandatory	The total number of input DDP datagrams dropped because the received data length was less than the data length specified in the DDP header or the received data…
1.3.6.1.4.1.18.3.5.4.3.1.33	ColumnwfApplePortDdpTooLongErrors	read-only	mandatory	The total number of input DDP datagrams dropped because the received data length was greater than the data length specified in the DDP header or because they e…
1.3.6.1.4.1.18.3.5.4.3.1.34	ColumnwfApplePortDdpChecksumErrors	read-only	mandatory	The total number of input DDP datagrams for which this DDP entity was their final destination, and which were dropped because of a checksum error.
1.3.6.1.4.1.18.3.5.4.3.1.35	ColumnwfApplePortDdpForwRequests	read-only	mandatory	The number of input datagrams for which this entity was not their final DDP destination, as a result of which an attempt was made to find a route to forward th…
1.3.6.1.4.1.18.3.5.4.3.1.36	ColumnwfApplePortDdpOutNoRoutes	read-only	mandatory	The total number of DDP datagrams dropped because a route could not be found to their final destination.
1.3.6.1.4.1.18.3.5.4.3.1.37	ColumnwfApplePortDdpBroadcastErrors	read-only	mandatory	The total number of input DDP datagrams dropped because this entity was not their final destination and they were addressed to the link level broadcast.
1.3.6.1.4.1.18.3.5.4.3.1.38	ColumnwfApplePortDdpHopCountErrors	read-only	mandatory	The total number of input DDP datagrams dropped because this entity was not their final destination and their hop count would exceed 15.
1.3.6.1.4.1.18.3.5.4.3.1.39	ColumnwfApplePortRtmpInDataPkts	read-only	mandatory	A count of the number of good RTMP data packets received by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.40	ColumnwfApplePortRtmpOutDataPkts	read-only	mandatory	A count of the number of RTMP packets sent by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.41	ColumnwfApplePortRtmpInRequestPkts	read-only	mandatory	A count of the number of good RTMP Request packets received by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.42	ColumnwfApplePortRtmpNextIREqualChanges	read-only	mandatory	A count of the number of times RTMP changes the Next Internet Router in a routing entry because the hop count advertised in a routing tuple was equal to the cu…
1.3.6.1.4.1.18.3.5.4.3.1.43	ColumnwfApplePortRtmpNextIRLessChanges	read-only	mandatory	A count of the number of times RTMP changes the Next Internet Router in a routing entry because the hop count advertised in a routing tuple was less than the c…
1.3.6.1.4.1.18.3.5.4.3.1.44	ColumnwfApplePortRtmpRouteDeletes	read-only	mandatory	A count of the number of times RTMP deletes a route because it was aged out of the table. This can help to detect routing problems.
1.3.6.1.4.1.18.3.5.4.3.1.45	ColumnwfApplePortRtmpNetworkMismatchErrors	read-only	mandatory	The number of times RTMP receives a Data packet from a router who claims to be on a different network than that configured for the receiving port. This can hel…
1.3.6.1.4.1.18.3.5.4.3.1.46	ColumnwfApplePortRtmpRoutingTableOverflows	read-only	mandatory	The number of times RTMP attempted to add a route to the RTMP table but failed due to overflow.
1.3.6.1.4.1.18.3.5.4.3.1.47	ColumnwfApplePortZipInZipQueries	read-only	mandatory	The number of ZIP Queries received by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.48	ColumnwfApplePortZipInZipReplies	read-only	mandatory	The number of ZIP Replies received by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.49	ColumnwfApplePortZipOutZipReplies	read-only	mandatory	The number of ZIP Replies sent by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.50	ColumnwfApplePortZipInZipExtendedReplies	read-only	mandatory	The number of ZIP Extended Replies received by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.51	ColumnwfApplePortZipOutZipExtendedReplies	read-only	mandatory	The number of ZIP Extended Replies sent by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.52	ColumnwfApplePortZipInGetZoneLists	read-only	mandatory	The number of ZIP GetZoneList transactions received by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.53	ColumnwfApplePortZipOutGetZoneListReplies	read-only	mandatory	The number of ZIP GetZoneListReply transactions sent by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.54	ColumnwfApplePortZipInGetLocalZones	read-only	mandatory	The number of ZIP GetLocalZone transactions received by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.55	ColumnwfApplePortZipOutGetLocalZoneReplies	read-only	mandatory	The number of ZIP GetLocalZoneReply transactions sent by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.56	ColumnwfApplePortZipInGetMyZones	read-only	mandatory	The number of ZIP GetMyZone transactions received by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.57	ColumnwfApplePortZipOutGetMyZoneReplies	read-only	mandatory	The number of ZIP GetMyZoneReply transactions sent by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.58	ColumnwfApplePortZipZoneConflictErrors	read-only	mandatory	The number of times a conflict has been detected between this entity's zone information and another entity's zone information.
1.3.6.1.4.1.18.3.5.4.3.1.59	ColumnwfApplePortZipInGetNetInfos	read-only	mandatory	The number of ZIP GetNetInfo packets received on this port by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.60	ColumnwfApplePortZipOutGetNetInfoReplies	read-only	mandatory	The number of ZIP GetNetInfoReply packets sent out this port by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.61	ColumnwfApplePortZipZoneOutInvalids	read-only	mandatory	The number of times this entity has sent a ZIP GetNetInfo Reply with the zone invalid bit set in response to a GetNetInfo Request with an invalid zone name.
1.3.6.1.4.1.18.3.5.4.3.1.62	ColumnwfApplePortZipAddressInvalids	read-only	mandatory	The number of times this entity had to broadcast a ZIP GetNetInfo Reply because the GetNetInfo Request had an invalid address.
1.3.6.1.4.1.18.3.5.4.3.1.63	ColumnwfApplePortZipOutGetNetInfos	read-only	mandatory	The number of ZIP GetNetInfo packets sent out this port by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.64	ColumnwfApplePortZipInGetNetInfoReplies	read-only	mandatory	The number of ZIP GetNetInfoReply packets received on this port by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.65	ColumnwfApplePortZipOutZipQueries	read-only	mandatory	The number of ZIP Queries sent by this entity.
1.3.6.1.4.1.18.3.5.4.3.1.66	ColumnwfApplePortZipInErrors	read-only	mandatory	The number of ZIP packets received by this entity that were rejected for any error.
1.3.6.1.4.1.18.3.5.4.3.1.67	ColumnwfApplePortNbpInLookUpRequests	read-only	mandatory	The number of NBP LookUp Requests received.
1.3.6.1.4.1.18.3.5.4.3.1.68	ColumnwfApplePortNbpInLookUpReplies	read-only	mandatory	The number of NBP LookUp Replies received.
1.3.6.1.4.1.18.3.5.4.3.1.69	ColumnwfApplePortNbpInBroadcastRequests	read-only	mandatory	The number of NBP Broadcast Requests received.
1.3.6.1.4.1.18.3.5.4.3.1.70	ColumnwfApplePortNbpInForwardRequests	read-only	mandatory	The number of NBP Forward Requests received.
1.3.6.1.4.1.18.3.5.4.3.1.71	ColumnwfApplePortNbpOutLookUpRequests	read-only	mandatory	The number of NBP LookUp Requests sent.
1.3.6.1.4.1.18.3.5.4.3.1.72	ColumnwfApplePortNbpOutLookUpReplies	read-only	mandatory	The number of NBP LookUp Replies sent.
1.3.6.1.4.1.18.3.5.4.3.1.73	ColumnwfApplePortNbpOutBroadcastRequests	read-only	mandatory	The number of NBP Broadcast Requests sent.
1.3.6.1.4.1.18.3.5.4.3.1.74	ColumnwfApplePortNbpOutForwardRequests	read-only	mandatory	The number of NBP Forward Requests sent.
1.3.6.1.4.1.18.3.5.4.3.1.75	ColumnwfApplePortNbpRegistrationFailures	read-only	mandatory	The number of times this node experienced a failure in attempting to register an NBP entity.
1.3.6.1.4.1.18.3.5.4.3.1.76	ColumnwfApplePortNbpInErrors	read-only	mandatory	The number of NBP packets received by this entity that were rejected for any error.
1.3.6.1.4.1.18.3.5.4.3.1.77	ColumnwfApplePortEchoRequests	read-only	mandatory	The number of AppleTalk Echo requests received.
1.3.6.1.4.1.18.3.5.4.3.1.78	ColumnwfApplePortEchoReplies	read-only	mandatory	The number of AppleTalk Echo replies sent.
1.3.6.1.4.1.18.3.5.4.4	TablewfAppleLclZoneTable	not-accessible	mandatory	The Local Zone table describes a list of zone names s serviced by a particular AppleTalk port/interface. In other words, the list of zone names that are associ…
1.3.6.1.4.1.18.3.5.4.4.1	RowwfAppleLclZoneEntry	not-accessible	mandatory	An entry in the Local Zone table
1.3.6.1.4.1.18.3.5.4.4.1.1	ColumnwfAppleLclZoneDelete	read-write	mandatory	Create/Delete parameter for adding/deleting a zone name to the Local Zone List for a particular AppleTalk network interface.
1.3.6.1.4.1.18.3.5.4.4.1.2	ColumnwfAppleLclZonePortCircuit	read-only	mandatory	The circuit number for the corresponding AppleTalk interface /port for this zone list.
1.3.6.1.4.1.18.3.5.4.4.1.3	ColumnwfAppleLclZoneIndex	read-only	mandatory	A unique value for this zone name.
1.3.6.1.4.1.18.3.5.4.4.1.4	ColumnwfAppleLclZoneName	read-write	mandatory	One of the local zone names defined for this/ interface.
1.3.6.1.4.1.18.3.5.4.5	TablewfAppleAarpTable	not-accessible	mandatory	The AppleTalk Address Translation table contains a mapping of AppleTalk Network addresses to its corresponding physical address.
1.3.6.1.4.1.18.3.5.4.5.1	RowwfAppleAarpEntry	not-accessible	mandatory	An entry in the Address Mapping table
1.3.6.1.4.1.18.3.5.4.5.1.1	ColumnwfAppleAarpIfIndex	read-only	mandatory	The unique value for this interface/cct. This value is the same interface as identified by the value of ifIndex.
1.3.6.1.4.1.18.3.5.4.5.1.2	ColumnwfAppleAarpNet	read-only	mandatory	The host's AppleTalk address (Net.Nodeid). This address corresponds to the media-dependent 'physical' address for this host.
1.3.6.1.4.1.18.3.5.4.5.1.3	ColumnwfAppleAarpNode	read-only	mandatory	The host's AppleTalk address (Net.Nodeid). This address corresponds to the media-dependent 'physical' address for this host.
1.3.6.1.4.1.18.3.5.4.5.1.4	ColumnwfAppleAarpPhysAddress	read-only	mandatory	The media-dependent 'physical' address.
1.3.6.1.4.1.18.3.5.4.6	TablewfAppleZipTable	not-accessible	mandatory	The Zone Information table for reachable AppleTalk Networks.
1.3.6.1.4.1.18.3.5.4.6.1	RowwfAppleZipEntry	not-accessible	mandatory	An entry in the Zone Information table
1.3.6.1.4.1.18.3.5.4.6.1.1	ColumnwfAppleZipZoneNetStart	read-only	mandatory	The network that starts the range for this entry.
1.3.6.1.4.1.18.3.5.4.6.1.2	ColumnwfAppleZipZoneNetEnd	read-only	mandatory	The network that ends the range for this entry.
1.3.6.1.4.1.18.3.5.4.6.1.3	ColumnwfAppleZipIndex	read-only	mandatory	The unique value for this zone name.
1.3.6.1.4.1.18.3.5.4.6.1.4	ColumnwfAppleZipZoneName	read-only	mandatory	The ASCII xone name of this entry.
1.3.6.1.4.1.18.3.5.4.6.1.5	ColumnwfAppleZipZoneState	read-only	mandatory	The state of the ZIP entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ZipTable. It effectively,…
1.3.6.1.4.1.18.3.5.5	NodewfIpxGroup
1.3.6.1.4.1.18.3.5.5.1	NodewfIpxBase
1.3.6.1.4.1.18.3.5.5.1.1	ScalarwfIpxBaseDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete IPX.
1.3.6.1.4.1.18.3.5.5.1.2	ScalarwfIpxBaseDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable IPX.
1.3.6.1.4.1.18.3.5.5.1.3	ScalarwfIpxBaseState	read-only	mandatory	The current state of the entire IPX.
1.3.6.1.4.1.18.3.5.5.1.4	ScalarwfIpxBaseCfgHostNumber	read-write	mandatory	box generated hostnumber.
1.3.6.1.4.1.18.3.5.5.1.5	ScalarwfIpxBaseActiveHostNumber	read-only	mandatory	generated variable.
1.3.6.1.4.1.18.3.5.5.1.6	ScalarwfIpxBaseNetCount	read-only	mandatory	Count the total number of nets in the box.
1.3.6.1.4.1.18.3.5.5.1.7	ScalarwfIpxBaseServiceCount	read-only	mandatory	Count the total number of saps in the box.
1.3.6.1.4.1.18.3.5.5.1.8	ScalarwfIpxBaseLogFilter	read-write	mandatory	Filter out some log messages, Default filters out debugs, info, and trace messages.
1.3.6.1.4.1.18.3.5.5.1.9	ScalarwfIpxBaseNetTblSize	read-write	mandatory	Tell me how much space to set aside when creating the forwarding and network tables.
1.3.6.1.4.1.18.3.5.5.2	TablewfIpxBaseRtEntryTable	not-accessible	mandatory	The table of Elements in IPX's routing table
1.3.6.1.4.1.18.3.5.5.2.1	RowwfIpxBaseRtEntry	not-accessible	mandatory	An entry in the Routing Table
1.3.6.1.4.1.18.3.5.5.2.1.1	ColumnwfIpxBaseRouteDest	read-only	mandatory	Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by th…
1.3.6.1.4.1.18.3.5.5.2.1.2	ColumnwfIpxBaseRouteIfIndex	read-only	mandatory	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu…
1.3.6.1.4.1.18.3.5.5.2.1.3	ColumnwfIpxBaseRouteMetric	read-only	mandatory	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If …
1.3.6.1.4.1.18.3.5.5.2.1.4	ColumnwfIpxBaseRouteNextHopNetwork	read-only	mandatory	(In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IPX address on that interface.)
1.3.6.1.4.1.18.3.5.5.2.1.5	ColumnwfIpxBaseRouteNextHopHost	read-only	mandatory	Full network.host_id address of nexthop host for this network.
1.3.6.1.4.1.18.3.5.5.2.1.6	ColumnwfIpxBaseRouteType	read-only	mandatory	The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IPX architecture. Setting this obje…
1.3.6.1.4.1.18.3.5.5.2.1.7	ColumnwfIpxBaseRouteProto	read-only	mandatory	The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th…
1.3.6.1.4.1.18.3.5.5.2.1.8	ColumnwfIpxBaseRouteAge	read-only	mandatory	The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug…
1.3.6.1.4.1.18.3.5.5.2.1.9	ColumnwfIpxBaseRouteInfo	read-only	mandatory	A user-defined string which describes this Route entry
1.3.6.1.4.1.18.3.5.5.3	TablewfIpxBaseSapEntryTable	not-accessible	mandatory	The table of Elements in IPX's SAP table
1.3.6.1.4.1.18.3.5.5.3.1	RowwfIpxBaseSapEntry	not-accessible	mandatory	An entry in the Routing Table
1.3.6.1.4.1.18.3.5.5.3.1.1	ColumnwfIpxBaseSapType	read-only	mandatory	Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by th…
1.3.6.1.4.1.18.3.5.5.3.1.2	ColumnwfIpxBaseSapNetwork	read-only	mandatory	The network address of this service.
1.3.6.1.4.1.18.3.5.5.3.1.3	ColumnwfIpxBaseSapHost	read-only	mandatory	The host address for this service.
1.3.6.1.4.1.18.3.5.5.3.1.4	ColumnwfIpxBaseSapSocket	read-only	mandatory	The socket for this particular service
1.3.6.1.4.1.18.3.5.5.3.1.5	ColumnwfIpxBaseSapName	read-only	mandatory	The server name.
1.3.6.1.4.1.18.3.5.5.3.1.6	ColumnwfIpxBaseSapAge	read-only	mandatory	The number of seconds since SAP entry has been updated.
1.3.6.1.4.1.18.3.5.5.3.1.7	ColumnwfIpxBaseSapHops	read-only	mandatory	The number of Hops away service is from router.
1.3.6.1.4.1.18.3.5.5.3.1.8	ColumnwfIpxBaseSapIndex	read-only	mandatory	Index string comprised of type.network.hostid.socket. Makes sorting easier and its a ah work around.
1.3.6.1.4.1.18.3.5.5.3.1.9	ColumnwfIpxBaseSapIntf	read-only	mandatory	Network Address of Nexthop Interface.
1.3.6.1.4.1.18.3.5.5.4	TablewfIpxInterfaceTable	not-accessible	mandatory	The network interface record
1.3.6.1.4.1.18.3.5.5.4.1	RowwfIpxInterfaceEntry	not-accessible	mandatory	An entry in the Routing Table
1.3.6.1.4.1.18.3.5.5.4.1.1	ColumnwfIpxInterfaceIndex	read-only	mandatory	A unique value for each IPX interface. Its value ranges between 1 and the value of MAXCIRCUITS.
1.3.6.1.4.1.18.3.5.5.4.1.2	ColumnwfIpxInterfaceDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an IPX interface.
1.3.6.1.4.1.18.3.5.5.4.1.3	ColumnwfIpxInterfaceDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an IPX interface.
1.3.6.1.4.1.18.3.5.5.4.1.4	ColumnwfIpxInterfaceState	read-only	mandatory	The current state of the IPX interface
1.3.6.1.4.1.18.3.5.5.4.1.5	ColumnwfIpxInterfaceCircuit	read-only	mandatory	The Circuit Number that this interface runs over
1.3.6.1.4.1.18.3.5.5.4.1.6	ColumnwfIpxInterfaceNetworkNumber	read-only	mandatory	The IPX Address to which this entry's addressing information pertains
1.3.6.1.4.1.18.3.5.5.4.1.7	ColumnwfIpxInterfaceCost	read-write	mandatory	The Cost associated with the IPX Address of this entry
1.3.6.1.4.1.18.3.5.5.4.1.8	ColumnwfIpxInterfaceXsumOn	read-write	mandatory	Flag for checksums
1.3.6.1.4.1.18.3.5.5.4.1.9	ColumnwfIpxInterfaceCfgEncaps	read-write	mandatory	The encapsulation method associated with this interface chosen by the user but not necessarily the one used. (See wfIpxInterfaceEncaps)
1.3.6.1.4.1.18.3.5.5.4.1.10	ColumnwfIpxInterfaceMacAddress	read-only	mandatory	The MacAddress of this interface this port will receive or transmit.
1.3.6.1.4.1.18.3.5.5.4.1.11	ColumnwfIpxInterfaceSMDSGroupAddress	read-only	mandatory	The SMDS group address
1.3.6.1.4.1.18.3.5.5.4.1.12	ColumnwfIpxInterfaceMaxInfo	read-only	mandatory	The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
1.3.6.1.4.1.18.3.5.5.4.1.13	ColumnwfIpxInterfaceInReceives	read-only	mandatory	The total number of input datagrams received from interfaces, including those received in error.
1.3.6.1.4.1.18.3.5.5.4.1.14	ColumnwfIpxInterfaceInHdrErrors	read-only	mandatory	The number of input datagrams discarded due to errors in their IPX headers, including bad checksums, version number mismatch, other format errors, time-to-live…
1.3.6.1.4.1.18.3.5.5.4.1.15	ColumnwfIpxInterfaceInAddrErrors	read-only	mandatory	The number of input datagrams discarded because the IPX address in their IPX header's destination field was not a valid address to be received at this entity.
1.3.6.1.4.1.18.3.5.5.4.1.16	ColumnwfIpxInterfaceForwDatagrams	read-only	mandatory	The number of input datagrams for which this entity was not their final IPX destination, as a result of which an attempt was made to find a route to forward th…
1.3.6.1.4.1.18.3.5.5.4.1.17	ColumnwfIpxInterfaceInUnknownProtos	read-only	mandatory	The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
1.3.6.1.4.1.18.3.5.5.4.1.18	ColumnwfIpxInterfaceInDiscards	read-only	mandatory	The number of input IPX datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buf…
1.3.6.1.4.1.18.3.5.5.4.1.19	ColumnwfIpxInterfaceInDelivers	read-only	mandatory	The total number of input datagrams successfully delivered to IPX user-protocols .
1.3.6.1.4.1.18.3.5.5.4.1.20	ColumnwfIpxInterfaceOutRequests	read-only	mandatory	The total number of IPX datagrams which local IPX user-protocols supplied to IPX in requests for transmission. Note that this counter does not include any data…
1.3.6.1.4.1.18.3.5.5.4.1.21	ColumnwfIpxInterfaceOutDiscards	read-only	mandatory	The number of output IPX datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for…
1.3.6.1.4.1.18.3.5.5.4.1.22	ColumnwfIpxInterfaceOutNoRoutes	read-only	mandatory	The number of IPX datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counte…
1.3.6.1.4.1.18.3.5.5.4.1.23	ColumnwfIpxInterfaceTrEndStation	read-write	mandatory	Source Routing flag
1.3.6.1.4.1.18.3.5.5.4.1.24	ColumnwfIpxInterfaceNetbiosAccept	read-write	mandatory	Accept NetBios All Networks Broadcast Packets
1.3.6.1.4.1.18.3.5.5.4.1.25	ColumnwfIpxInterfaceNetbiosDeliver	read-write	mandatory	Deliver NetBios All Networks Broadcast Packets
1.3.6.1.4.1.18.3.5.5.4.1.26	ColumnwfIpxInterfaceWanSapPeriod	read-write	mandatory	Timer for Sap entries over WAN
1.3.6.1.4.1.18.3.5.5.4.1.27	ColumnwfIpxInterfaceFRBcast	read-write	mandatory	Configurable Frame Relay broadcast address
1.3.6.1.4.1.18.3.5.5.4.1.28	ColumnwfIpxInterfaceFRMcast	read-write	mandatory	Configurable Frame Relay multicast address
1.3.6.1.4.1.18.3.5.5.4.1.29	ColumnwfIpxInterfaceEncaps	read-only	mandatory	The Active or final encapsulation method associated with this interface as determined by the router's implementation of encapsulation algorithms (rules, restri…
1.3.6.1.4.1.18.3.5.5.4.1.30	ColumnwfIpxInterfaceSplit	read-write	mandatory	Comes into to play for non full-meshed WAN networks (Frame Relay)
1.3.6.1.4.1.18.3.5.5.4.1.31	ColumnwfIpxInterfaceCacheHit	read-only	mandatory	Will provide information that will determine the usefullness of caching.
1.3.6.1.4.1.18.3.5.5.5	TablewfIpxRipIntfTable	not-accessible	mandatory	The list of RIP interfaces
1.3.6.1.4.1.18.3.5.5.5.1	RowwfIpxRipIntfEntry	not-accessible	mandatory	An entry in the Routing Table
1.3.6.1.4.1.18.3.5.5.5.1.1	ColumnwfIpxRipInterfaceDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an RIP Interface instance.
1.3.6.1.4.1.18.3.5.5.5.1.2	ColumnwfIpxRipInterfaceDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an RIP instance.
1.3.6.1.4.1.18.3.5.5.5.1.3	ColumnwfIpxRipInterfaceState	read-only	mandatory	The current state of RIP on this interface.
1.3.6.1.4.1.18.3.5.5.5.1.4	ColumnwfIpxRipInterfaceIndex	read-only	mandatory	The IPX interface to run RIP on (instance id ).
1.3.6.1.4.1.18.3.5.5.5.1.5	ColumnwfIpxRipInterfaceSupply	read-write	mandatory	Transmit RIP packets.
1.3.6.1.4.1.18.3.5.5.5.1.6	ColumnwfIpxRipInterfaceListen	read-write	mandatory	Receive RIP packets.
1.3.6.1.4.1.18.3.5.5.6	TablewfIpxAdjacentHostTable	not-accessible	mandatory	must be configured for a nexthop host.
1.3.6.1.4.1.18.3.5.5.6.1	RowwfIpxAdjacentHostEntry	not-accessible	mandatory	An entry in the Adjacent Host Table
1.3.6.1.4.1.18.3.5.5.6.1.1	ColumnwfIpxAhDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX Static Host.
1.3.6.1.4.1.18.3.5.5.6.1.2	ColumnwfIpxAhDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX Static Route.
1.3.6.1.4.1.18.3.5.5.6.1.3	ColumnwfIpxAhTargHostNetwork	read-only	mandatory	The network address of the static host.
1.3.6.1.4.1.18.3.5.5.6.1.4	ColumnwfIpxAhTargHostId	read-only	mandatory	The Address of this static host.
1.3.6.1.4.1.18.3.5.5.6.1.5	ColumnwfIpxAhNextHopIntf	read-write	mandatory	The Next Hop Interface Network Address
1.3.6.1.4.1.18.3.5.5.6.1.6	ColumnwfIpxAhDlci	read-write	mandatory	The next Hop Host address
1.3.6.1.4.1.18.3.5.5.7	TablewfIpxStaticRouteTable	not-accessible	mandatory	The list of static routes used for Configuring IPX
1.3.6.1.4.1.18.3.5.5.7.1	RowwfIpxStaticRouteEntry	not-accessible	mandatory	An entry in the Routing Table
1.3.6.1.4.1.18.3.5.5.7.1.1	ColumnwfIpxSrDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX Static Route.
1.3.6.1.4.1.18.3.5.5.7.1.2	ColumnwfIpxSrDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX Static Route.
1.3.6.1.4.1.18.3.5.5.7.1.3	ColumnwfIpxSrTargNetwork	read-only	mandatory	The Address of this static route
1.3.6.1.4.1.18.3.5.5.7.1.4	ColumnwfIpxSrCost	read-write	mandatory	The Cost of this Static Route
1.3.6.1.4.1.18.3.5.5.7.1.5	ColumnwfIpxSrNextHopNetwork	read-only	mandatory	The Next Hop IPX Address
1.3.6.1.4.1.18.3.5.5.7.1.6	ColumnwfIpxSrNextHopHost	read-write	mandatory	The next Hop Host address
1.3.6.1.4.1.18.3.5.5.7.1.7	ColumnwfIpxSrTargNetworkRt	read-only	mandatory	The Route Identifier Which numbered route this is to be
1.3.6.1.4.1.18.3.5.5.8	TablewfIpxNetBiosStaticRouteTable	not-accessible	mandatory	The list of static routes used for Configuring IPX
1.3.6.1.4.1.18.3.5.5.8.1	RowwfIpxNetBiosStaticRouteEntry	not-accessible	mandatory	An entry in the Routing Table
1.3.6.1.4.1.18.3.5.5.8.1.1	ColumnwfIpxNetBiosSrDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX NETBIOS Static Route.
1.3.6.1.4.1.18.3.5.5.8.1.2	ColumnwfIpxNetBiosSrDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX NETBIOS Static Route.
1.3.6.1.4.1.18.3.5.5.8.1.3	ColumnwfIpxNetBiosSrTargNetwork	read-only	mandatory	The Address of this static route
1.3.6.1.4.1.18.3.5.5.8.1.4	ColumnwfIpxNetBiosSrName	read-write	mandatory	The Name of the Target Server
1.3.6.1.4.1.18.3.5.5.8.1.5	ColumnwfIpxNetBiosSrIntf	read-only	mandatory	The Interface Identifier for this static entry
1.3.6.1.4.1.18.3.5.5.8.1.6	ColumnwfIpxNetBiosSrIndex	read-only	mandatory	The Entry Index Which identifies this is entry
1.3.6.1.4.1.18.3.5.5.9	TablewfIpxSapNetLvlFilterTable	not-accessible	mandatory	The list of Network Level SAP Filters
1.3.6.1.4.1.18.3.5.5.9.1	RowwfIpxSapNetLvlFilter	not-accessible	mandatory	An entry in the Filter Table
1.3.6.1.4.1.18.3.5.5.9.1.1	ColumnwfIpxSapNetLvlDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX Sap network level filter.
1.3.6.1.4.1.18.3.5.5.9.1.2	ColumnwfIpxSapNetLvlDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX network level SAP filter.
1.3.6.1.4.1.18.3.5.5.9.1.3	ColumnwfIpxSapNetLvlTargNetwork	read-write	mandatory	The Target Network address to monitor
1.3.6.1.4.1.18.3.5.5.9.1.4	ColumnwfIpxSapNetLvlType	read-write	mandatory	The Type of service to monitor
1.3.6.1.4.1.18.3.5.5.9.1.5	ColumnwfIpxSapNetLvlAction	read-write	mandatory	The Action to take Advertise or not Advertise
1.3.6.1.4.1.18.3.5.5.9.1.6	ColumnwfIpxSapNetLvlIntf	read-only	mandatory	The Interface identifier for this filter
1.3.6.1.4.1.18.3.5.5.9.1.7	ColumnwfIpxSapNetLvlIndex	read-only	mandatory	The Filter Index .
1.3.6.1.4.1.18.3.5.5.10	TablewfIpxSapServtLvlFilterTable	not-accessible	mandatory	The list of Server Level SAP Filters
1.3.6.1.4.1.18.3.5.5.10.1	RowwfIpxSapServLvlFilter	not-accessible	mandatory	An entry in the Filter Table
1.3.6.1.4.1.18.3.5.5.10.1.1	ColumnwfIpxSapServLvlDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX server-level SAP filter.
1.3.6.1.4.1.18.3.5.5.10.1.2	ColumnwfIpxSapServLvlDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX server-level SAP filter.
1.3.6.1.4.1.18.3.5.5.10.1.3	ColumnwfIpxSapServLvlTargServer	read-write	mandatory	The Server Name to monitor.
1.3.6.1.4.1.18.3.5.5.10.1.4	ColumnwfIpxSapServLvlType	read-write	mandatory	Type of service File server, Printer, etc...
1.3.6.1.4.1.18.3.5.5.10.1.5	ColumnwfIpxSapServLvlAction	read-write	mandatory	Associated Action (advertise or ignore )
1.3.6.1.4.1.18.3.5.5.10.1.6	ColumnwfIpxSapServLvlIntf	read-only	mandatory	The Interface identifier for this filter
1.3.6.1.4.1.18.3.5.5.10.1.7	ColumnwfIpxSapServLvlIndex	read-only	mandatory	The Filter Index .
1.3.6.1.4.1.18.3.5.5.11	TablewfIpxTrafficFilterTable	not-accessible	mandatory	IPX Traffic Filters
1.3.6.1.4.1.18.3.5.5.11.1	RowwfIpxTrafficFilterEntry	not-accessible	mandatory	A traffic filter definition
1.3.6.1.4.1.18.3.5.5.11.1.1	ColumnwfIpxTrafficFilterCreate	read-write	mandatory	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
1.3.6.1.4.1.18.3.5.5.11.1.2	ColumnwfIpxTrafficFilterEnable	read-write	mandatory	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
1.3.6.1.4.1.18.3.5.5.11.1.3	ColumnwfIpxTrafficFilterStatus	read-only	mandatory	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error…
1.3.6.1.4.1.18.3.5.5.11.1.4	ColumnwfIpxTrafficFilterCounter	read-only	mandatory	The number of received packets that have matched this rule.
1.3.6.1.4.1.18.3.5.5.11.1.5	ColumnwfIpxTrafficFilterDefinition	read-write	mandatory	The filter rule definition.
1.3.6.1.4.1.18.3.5.5.11.1.6	ColumnwfIpxTrafficFilterReserved	not-accessible	mandatory	Reserved field.
1.3.6.1.4.1.18.3.5.5.11.1.7	ColumnwfIpxTrafficFilterInterface	read-only	mandatory	The network address of the IPX interface to which this filter is applied.
1.3.6.1.4.1.18.3.5.5.11.1.8	ColumnwfIpxTrafficFilterCircuit	read-only	mandatory	The ID of the Circuit to which the filter is applied.
1.3.6.1.4.1.18.3.5.5.11.1.9	ColumnwfIpxTrafficFilterRuleNumber	read-only	mandatory	ID for the rule.
1.3.6.1.4.1.18.3.5.5.11.1.10	ColumnwfIpxTrafficFilterFragment	read-only	mandatory	Fragment number - for large rules.
1.3.6.1.4.1.18.3.5.6	NodewfOsiGroup
1.3.6.1.4.1.18.3.5.8	NodewfVinesGroup
1.3.6.1.4.1.18.3.5.8.1	NodewfVinesBase
1.3.6.1.4.1.18.3.5.8.1.1	ScalarwfVinesBaseDelete	read-write	mandatory	Create/Delete parameter. This value determines whether or not VINES is configured on this slot.
1.3.6.1.4.1.18.3.5.8.1.2	ScalarwfVinesBaseDisable	read-write	mandatory	This parameter determines whether or not VINES is to startup.
1.3.6.1.4.1.18.3.5.8.1.3	ScalarwfVinesBaseState	read-only	mandatory	This parameter reflects the current state of VINES.
1.3.6.1.4.1.18.3.5.8.1.4	ScalarwfVinesBaseUserNetid	read-write	mandatory	The network ID as defined by the user. A null value indicates that the user is not configuring a Network ID and that the the router should assign it.
1.3.6.1.4.1.18.3.5.8.1.5	ScalarwfVinesBaseRouterNetid	read-only	mandatory	The network ID as defined by the router. If the user configures a Network ID in the above attribute, we will take that value and add in the Wellfleet code for …
1.3.6.1.4.1.18.3.5.8.1.6	ScalarwfVinesBaseBcastClass	read-write	mandatory	The broadcast modifier. This value defines the class of broadcast packets that are originated by this node.
1.3.6.1.4.1.18.3.5.8.2	NodewfVinesIp
1.3.6.1.4.1.18.3.5.8.2.1	ScalarwfVinesIpTotIn	read-only	mandatory	The total number of VINES IP packets received.
1.3.6.1.4.1.18.3.5.8.2.2	ScalarwfVinesIpTotOut	read-only	mandatory	The total number of VINES IP packets sent.
1.3.6.1.4.1.18.3.5.8.2.3	ScalarwfVinesIpBad	read-only	mandatory	The total number of badly formed packets that were received. This field is incremented when a packet is received with an improper checksum.
1.3.6.1.4.1.18.3.5.8.2.4	ScalarwfVinesIpRouted	read-only	mandatory	The total number of packets received that were routed to another node. This statistic includes the number of IP packets encapsulated within routed VINES IP hea…
1.3.6.1.4.1.18.3.5.8.2.5	ScalarwfVinesIpRoutedHWM	read-only	mandatory	The largest number of packets routed in one second since the server was last booted.
1.3.6.1.4.1.18.3.5.8.2.6	ScalarwfVinesIpBcast	read-only	mandatory	The number of VINES IP broadcast packets sent, both locally generated and routed from other nodes.
1.3.6.1.4.1.18.3.5.8.2.7	ScalarwfVinesIpBcastHWM	read-only	mandatory	The largest number of packets broadcast in one second since the server was last booted.
1.3.6.1.4.1.18.3.5.8.2.8	ScalarwfVinesIpReass	read-only	mandatory	The number of times that packets were reassembled. Reassemblies result from the transmission of packets that must be broken into smaller pieces, then reassembl…
1.3.6.1.4.1.18.3.5.8.2.9	ScalarwfVinesIpFrags	read-only	mandatory	The number of packet fragmentations performed.
1.3.6.1.4.1.18.3.5.8.2.10	ScalarwfVinesIpToDodIP	read-only	mandatory	The number of packets that VINES IP passed to IP for encapsulation in IP headers. These packets were initially handled by VINES IP, but were passed to IP for r…
1.3.6.1.4.1.18.3.5.8.2.11	ScalarwfVinesIpFromDodIP	read-only	mandatory	The number of packets that VINES IP received from IP to be decapsulated into VINES packets. IP initially handled these packets, but had to pass them on to VINE…
1.3.6.1.4.1.18.3.5.8.3	NodewfVinesRtpNbr
1.3.6.1.4.1.18.3.5.8.3.1	ScalarwfVinesRtpNbrNumber	read-only	mandatory	Number of entries in the Table of Neighbors.
1.3.6.1.4.1.18.3.5.8.4	TablewfVinesRtpNbrTable	not-accessible	mandatory	This is the Table of Neighbors.
1.3.6.1.4.1.18.3.5.8.4.1	RowwfVinesRtpNbrEntry	not-accessible	mandatory	An entry in the Table of Neighbors.
1.3.6.1.4.1.18.3.5.8.4.1.1	ColumnwfVinesRtpNbrNetId	read-only	mandatory	The network ID of this neighbor.
1.3.6.1.4.1.18.3.5.8.4.1.2	ColumnwfVinesRtpNbrSubNetId	read-only	mandatory	The subnetwork ID of this neighbor.
1.3.6.1.4.1.18.3.5.8.4.1.3	ColumnwfVinesRtpNbrType	read-only	mandatory	The type of node: client or server.
1.3.6.1.4.1.18.3.5.8.4.1.4	ColumnwfVinesRtpNbrIfType	read-only	mandatory	This describes the type of interface.
1.3.6.1.4.1.18.3.5.8.4.1.5	ColumnwfVinesRtpNbrRemAdr	read-only	mandatory	Remote MAC address.
1.3.6.1.4.1.18.3.5.8.4.1.6	ColumnwfVinesRtpNbrLocAdr	read-only	mandatory	Local MAC address.
1.3.6.1.4.1.18.3.5.8.4.1.7	ColumnwfVinesRtpNbrLocSlot	read-only	mandatory	Slot connected to this neighbor.
1.3.6.1.4.1.18.3.5.8.4.1.8	ColumnwfVinesRtpNbrLocLine	read-only	mandatory	Line connected to this neighbor.
1.3.6.1.4.1.18.3.5.8.4.1.9	ColumnwfVinesRtpNbrSvrName	read-only	mandatory	Name of the server (N/A).
1.3.6.1.4.1.18.3.5.8.4.1.10	ColumnwfVinesRtpNbrCost	read-only	mandatory	Cost for this neighbor.
1.3.6.1.4.1.18.3.5.8.5	NodewfVinesRtpRt
1.3.6.1.4.1.18.3.5.8.5.1	ScalarwfVinesRtpRtNumber	read-only	mandatory	Number of entries in the Table of Networks.
1.3.6.1.4.1.18.3.5.8.6	TablewfVinesRtpRtTable	not-accessible	mandatory	This is the Table of Networks.
1.3.6.1.4.1.18.3.5.8.6.1	RowwfVinesRtpRtEntry	not-accessible	mandatory	An entry in the Table of Networks.
1.3.6.1.4.1.18.3.5.8.6.1.1	ColumnwfVinesRtpRtNetid	read-only	mandatory	The network ID number.
1.3.6.1.4.1.18.3.5.8.6.1.2	ColumnwfVinesRtpRtMetric	read-only	mandatory	The routing metric to get to this network.
1.3.6.1.4.1.18.3.5.8.6.1.3	ColumnwfVinesRtpRtIdle	read-only	mandatory	The idle time for this network.
1.3.6.1.4.1.18.3.5.8.6.1.4	ColumnwfVinesRtpRtGateNetid	read-only	mandatory	The network ID of the gateway to this network.
1.3.6.1.4.1.18.3.5.8.6.1.5	ColumnwfVinesRtpRtSvrName	read-only	mandatory	The servers name (N/A).
1.3.6.1.4.1.18.3.5.8.6.1.6	ColumnwfVinesRtpRtGateSvrName	read-only	mandatory	The name of the gateway server.
1.3.6.1.4.1.18.3.5.8.7	NodewfVinesIf
1.3.6.1.4.1.18.3.5.8.7.1	ScalarwfVinesIfNumber	read-only	mandatory	This is the number of entries in the Interfaces Table.
1.3.6.1.4.1.18.3.5.8.8	TablewfVinesIfTable	not-accessible	mandatory	This is the Table of Interfaces.
1.3.6.1.4.1.18.3.5.8.8.1	RowwfVinesIfEntry	not-accessible	mandatory	An entry to the Interface Table.
1.3.6.1.4.1.18.3.5.8.8.1.1	ColumnwfVinesIfDelete	read-write	mandatory	Create/Delete parameter. Users perform an SNMP set command to create/delete a VINES interface.
1.3.6.1.4.1.18.3.5.8.8.1.2	ColumnwfVinesIfDisable	read-write	mandatory	Enable/Disable parameter. Users perform an SNMP set command to enable/disable a VINES interface.
1.3.6.1.4.1.18.3.5.8.8.1.3	ColumnwfVinesIfState	read-only	mandatory	This parameter reflects the current state of the VINES interface.
1.3.6.1.4.1.18.3.5.8.8.1.4	ColumnwfVinesIfSlot	read-only	mandatory	The slot on which this interface is configured.
1.3.6.1.4.1.18.3.5.8.8.1.5	ColumnwfVinesIfLine	read-only	mandatory	The line on which this interface is configured.
1.3.6.1.4.1.18.3.5.8.8.1.6	ColumnwfVinesIfCct	read-only	mandatory	The circuit number for this interface.
1.3.6.1.4.1.18.3.5.8.8.1.7	ColumnwfVinesIfSession	read-only	mandatory	The session number for this interface.
1.3.6.1.4.1.18.3.5.8.8.1.8	ColumnwfVinesIfType	read-write	mandatory	The type of interface this is.
1.3.6.1.4.1.18.3.5.8.8.1.9	ColumnwfVinesIfDescr	read-only	mandatory	Description of this interface.
1.3.6.1.4.1.18.3.5.8.8.1.10	ColumnwfVinesIfAdr	read-only	mandatory	The MAC address of this interface.
1.3.6.1.4.1.18.3.5.8.8.1.11	ColumnwfVinesIfDodIpDisable	read-write	mandatory	This parameter indicates if this interface is enabled to encapsulate VINES packets over DoD IP.
1.3.6.1.4.1.18.3.5.8.8.1.12	ColumnwfVinesIfArpDisable	read-write	mandatory	This parameter indicates if this interface is enabled to support VINES ARP.
1.3.6.1.4.1.18.3.5.8.8.1.13	ColumnwfVinesIfTrEndStation	read-write	mandatory	This parameter indicates if this interface is enabled for source routing end station support.
1.3.6.1.4.1.18.3.5.8.8.1.14	ColumnwfVinesIfInPkts	read-only	mandatory	The number of packets received on this interface.
1.3.6.1.4.1.18.3.5.8.8.1.15	ColumnwfVinesIfInErrs	read-only	mandatory	The number of packets received with errors.
1.3.6.1.4.1.18.3.5.8.8.1.16	ColumnwfVinesIfOutPkts	read-only	mandatory	The number of packets transmitted on this interface.
1.3.6.1.4.1.18.3.5.8.8.1.17	ColumnwfVinesIfOutErrs	read-only	mandatory	The number of errors on packets transmitted.
1.3.6.1.4.1.18.3.5.8.8.1.18	ColumnwfVinesIfInMsgs	read-only	mandatory	The number of messages received on this interface.
1.3.6.1.4.1.18.3.5.8.8.1.19	ColumnwfVinesIfMux	read-write	mandatory	Muxing scheme for this interface. VINES currently only supports Ethernet encapsulation, but they plan to switch to SNAP.
1.3.6.1.4.1.18.3.5.8.8.1.20	ColumnwfVinesIfFwdDrops	read-only	mandatory	The number of pakets that were dropped because of no forwarding information for the destination.
1.3.6.1.4.1.18.3.5.8.8.1.21	ColumnwfVinesIfZeroHopDrops	read-only	mandatory	The number of pakets that were dropped because of a zero hop count.
1.3.6.1.4.1.18.3.5.8.8.1.22	ColumnwfVinesIfIcpInErrorNotifs	read-only	mandatory	The number of ICP error notification packets received.
1.3.6.1.4.1.18.3.5.8.8.1.23	ColumnwfVinesIfIcpInMetricNotifs	read-only	mandatory	The number of ICP metric notification packets received.
1.3.6.1.4.1.18.3.5.8.8.1.24	ColumnwfVinesIfIcpInErrors	read-only	mandatory	The number of ICP packets received with errors.
1.3.6.1.4.1.18.3.5.8.8.1.25	ColumnwfVinesIfIcpOutErrorNotifs	read-only	mandatory	The number of ICP error notification packets transmitted.
1.3.6.1.4.1.18.3.5.8.8.1.26	ColumnwfVinesIfIcpOutMetricNotifs	read-only	mandatory	The number of ICP metric notification packets transmitted.
1.3.6.1.4.1.18.3.5.8.8.1.27	ColumnwfVinesIfArpInQueries	read-only	mandatory	The number of ARP queries received.
1.3.6.1.4.1.18.3.5.8.8.1.28	ColumnwfVinesIfArpInAssgReqs	read-only	mandatory	The number of ARP assignment requests received.
1.3.6.1.4.1.18.3.5.8.8.1.29	ColumnwfVinesIfArpInErrors	read-only	mandatory	The number of ARP packets received with errors.
1.3.6.1.4.1.18.3.5.8.8.1.30	ColumnwfVinesIfArpOutServRsps	read-only	mandatory	The number of ARP service responses sent.
1.3.6.1.4.1.18.3.5.8.8.1.31	ColumnwfVinesIfArpOutAssgRsps	read-only	mandatory	The number of ARP assignment responses sent.
1.3.6.1.4.1.18.3.5.8.8.1.32	ColumnwfVinesIfInRedirects	read-only	mandatory	The number of Redirect packets received.
1.3.6.1.4.1.18.3.5.8.8.1.33	ColumnwfVinesIfOutRedirects	read-only	mandatory	The number of Redirect packets sent.
1.3.6.1.4.1.18.3.5.8.8.1.34	ColumnwfVinesIfEchoInPkts	read-only	mandatory	The number of Echo packets received.
1.3.6.1.4.1.18.3.5.8.8.1.35	ColumnwfVinesIfEchoOutPkts	read-only	mandatory	The number of Echo packets sent.
1.3.6.1.4.1.18.3.5.8.8.1.36	ColumnwfVinesIfReassFails	read-only	mandatory	The number of packet reassemblies that failed.
1.3.6.1.4.1.18.3.5.8.8.1.37	ColumnwfVinesIfRemClientPrivDisable	read-write	mandatory	This parameter indicates that this interface will allow remote clients privileges on this segment. This means that a client is not restricted to being within o…
1.3.6.1.4.1.18.3.5.8.9	NodewfVinesIfX25VC
1.3.6.1.4.1.18.3.5.8.9.1	ScalarwfVinesIfX25VCNumber	read-only	mandatory	This is the number of entries in the X.25 Virtual Circuit Table.
1.3.6.1.4.1.18.3.5.8.10	TablewfVinesIfX25VCTable	not-accessible	mandatory	This is the Table of X.25 Virtual Circuits.
1.3.6.1.4.1.18.3.5.8.10.1	RowwfVinesIfX25VCEntry	not-accessible	mandatory	An entry in the Table of X.25 Virtual Circuits.
1.3.6.1.4.1.18.3.5.8.10.1.1	ColumnwfVinesIfX25VCSlot	read-only	mandatory	The number of the slot in which the card is installed.
1.3.6.1.4.1.18.3.5.8.10.1.2	ColumnwfVinesIfX25VCLine	read-only	mandatory	For a serial line, this is the number of the line on the card.
1.3.6.1.4.1.18.3.5.8.10.1.3	ColumnwfVinesIfX25VCCct	read-only	mandatory	Local circuit number for this Virtual Circuit.
1.3.6.1.4.1.18.3.5.8.10.1.4	ColumnwfVinesIfX25VCSession	read-only	mandatory	Local session number for this Virtual Circuit.
1.3.6.1.4.1.18.3.5.8.10.1.5	ColumnwfVinesIfX25VCTotIn	read-only	mandatory	The total number of VINES IP packets received on this VC. Depending on the size of the X.25 packets received, more than one X.25 packet can make up a VINES IP …
1.3.6.1.4.1.18.3.5.8.10.1.6	ColumnwfVinesIfX25VCTotOut	read-only	mandatory	The total number of VINES IP packets sent on this VC. Depending on the size of the X.25 packets sent, more than one X.25 packet can make up a VINES IP packet.
1.3.6.1.4.1.18.3.5.8.10.1.7	ColumnwfVinesIfX25VCInErrs	read-only	mandatory	The total number of input errors.
1.3.6.1.4.1.18.3.5.8.10.1.8	ColumnwfVinesIfX25VCOutErrs	read-only	mandatory	The total number of output errors.
1.3.6.1.4.1.18.3.5.8.10.1.9	ColumnwfVinesIfX25VCPktsOut	read-only	mandatory	The total number of X.25 packets transmitted on this VC.
1.3.6.1.4.1.18.3.5.8.10.1.10	ColumnwfVinesIfX25VCPktsAwaitAck	read-only	mandatory	Total number of X.25 packets transmitted on this VC waiting for ACK.
1.3.6.1.4.1.18.3.5.8.10.1.11	ColumnwfVinesIfX25VCBytesOut	read-only	mandatory	Total Bytes transmitted on this VC.
1.3.6.1.4.1.18.3.5.8.10.1.12	ColumnwfVinesIfX25VCBytesAwaitAck	read-only	mandatory	Total bytes transmitted on this VC that are waiting for ACK.
1.3.6.1.4.1.18.3.5.8.10.1.13	ColumnwfVinesIfX25VCPktsIn	read-only	mandatory	Total X.25 packets received on this VC.
1.3.6.1.4.1.18.3.5.8.10.1.14	ColumnwfVinesIfX25VCBytesIn	read-only	mandatory	Total Bytes received on this VC.
1.3.6.1.4.1.18.3.5.8.10.1.15	ColumnwfVinesIfX25VCResetsIn	read-only	mandatory	Number of X.25 reset packets received on this VC.
1.3.6.1.4.1.18.3.5.8.10.1.16	ColumnwfVinesIfX25VCResetsOut	read-only	mandatory	Number of X.25 reset packets transmitted on this VC.
1.3.6.1.4.1.18.3.5.8.11	TablewfVinesTrafficFilterTable	not-accessible	mandatory	VINES Traffic Filters
1.3.6.1.4.1.18.3.5.8.11.1	RowwfVinesTrafficFilterEntry	not-accessible	mandatory	An entry in WfVinesTrafficFilterTable.
1.3.6.1.4.1.18.3.5.8.11.1.1	ColumnwfVinesTrafficFilterCreate	read-write	mandatory	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
1.3.6.1.4.1.18.3.5.8.11.1.2	ColumnwfVinesTrafficFilterEnable	read-write	mandatory	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
1.3.6.1.4.1.18.3.5.8.11.1.3	ColumnwfVinesTrafficFilterStatus	read-only	mandatory	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error…
1.3.6.1.4.1.18.3.5.8.11.1.4	ColumnwfVinesTrafficFilterCounter	read-only	mandatory	The number of received packets that have matched this rule.
1.3.6.1.4.1.18.3.5.8.11.1.5	ColumnwfVinesTrafficFilterDefinition	read-write	mandatory	The filter rule definition.
1.3.6.1.4.1.18.3.5.8.11.1.6	ColumnwfVinesTrafficFilterReserved	not-accessible	mandatory	Reserved field.
1.3.6.1.4.1.18.3.5.8.11.1.7	ColumnwfVinesTrafficFilterCircuit	read-only	mandatory	The ID of the Circuit to which the filter is applied.
1.3.6.1.4.1.18.3.5.8.11.1.8	ColumnwfVinesTrafficFilterRuleNumber	read-only	mandatory	ID for the rule.
1.3.6.1.4.1.18.3.5.8.11.1.9	ColumnwfVinesTrafficFilterFragment	read-only	mandatory	Fragment number - for large rules.
1.3.6.1.4.1.18.3.5.8.12	TablewfVinesNameTable	not-accessible	mandatory	This is the Name-to-Address Binding Table.
1.3.6.1.4.1.18.3.5.8.12.1	RowwfVinesNameEntry	not-accessible	mandatory	An entry in the Table of Names.
1.3.6.1.4.1.18.3.5.8.12.1.1	ColumnwfVinesNameDelete	read-write	mandatory	Create/Delete parameter. Users perform an SNMP set command to create/delete this name.
1.3.6.1.4.1.18.3.5.8.12.1.2	ColumnwfVinesNameDisable	read-write	mandatory	Enable/Disable parameter. Users perform an SNMP set command to enable/disable a name.
1.3.6.1.4.1.18.3.5.8.12.1.3	ColumnwfVinesNameNetid	read-write	mandatory	This is the network number for the host.
1.3.6.1.4.1.18.3.5.8.12.1.4	ColumnwfVinesNameHost	read-write	mandatory	This is the name of the host.
1.3.6.1.4.1.18.3.5.8.12.1.5	ColumnwfVinesNameSubNetid	read-write	mandatory	This is the subnetwork number for the host.
1.3.6.1.4.1.18.3.5.8.13	NodewfVinesArp
1.3.6.1.4.1.18.3.5.8.13.1	ScalarwfVinesArpDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete ARP.
1.3.6.1.4.1.18.3.5.8.13.2	ScalarwfVinesArpDisable	read-write	mandatory	Enable/Disable Parameter indicates whether this ARP record is enabled or disabled.
1.3.6.1.4.1.18.3.5.8.13.3	ScalarwfVinesArpState	read-only	mandatory	State of ARP.
1.3.6.1.4.1.18.3.5.8.13.4	ScalarwfVinesArpSubnetid	read-only	mandatory	The next subnetwork ID to be assigned.
1.3.6.1.4.1.18.3.5.8.13.5	ScalarwfVinesArpSubnetBlock	read-write	mandatory	The size of the block of subnet ids a slot can grab.
1.3.6.1.4.1.18.3.5.8.13.6	ScalarwfVinesArpAssignDeniedPkts	read-only	mandatory	Number of ARP Assignment packets received for which we didn't have a free subnet number.
1.3.6.1.4.1.18.3.5.9	NodewfWanGroup
1.3.6.1.4.1.18.3.5.9.1	NodewfFrameRelayGroup
1.3.6.1.4.1.18.3.5.9.1.1	TablewfFrDlcmiTable	not-accessible	mandatory	The Parameters for the Data Link Connection Management Interface
1.3.6.1.4.1.18.3.5.9.1.1.1	RowwfFrDlcmiEntry	not-accessible	mandatory	The parameters for a particular Data Link Connection Management Interface
1.3.6.1.4.1.18.3.5.9.1.1.1.1	ColumnwfFrDlcmiDelete	read-write	mandatory	Indication to delete this frame relay interface
1.3.6.1.4.1.18.3.5.9.1.1.1.2	ColumnwfFrDlcmiDisable	read-write	mandatory	Indicates when a dlcmi entry is to be enabled or disabled.
1.3.6.1.4.1.18.3.5.9.1.1.1.3	ColumnwfFrDlcmiState	read-only	mandatory	The current state of Frame Relay. The not present state is not actually valid except when the record is first added. It is included for consistency.
1.3.6.1.4.1.18.3.5.9.1.1.1.4	ColumnwfFrDlcmiCircuit	read-only	mandatory	Instance identifier. The circuit number of this entry
1.3.6.1.4.1.18.3.5.9.1.1.1.5	ColumnwfFrDlcmiManagementType	read-write	mandatory	This variable indicates which Data Link Connection Management scheme is active (and by implication, what DLCI it uses).
1.3.6.1.4.1.18.3.5.9.1.1.1.6	ColumnwfFrDlcmiStatus	read-only	mandatory	Indicates the status of the interface. FR_STATUS_START is the state during rebooting or initial start of circuit FR_STATUS_RUNNING is the sate after the circui…
1.3.6.1.4.1.18.3.5.9.1.1.1.7	ColumnwfFrDlcmiAddress	read-write	mandatory	This states which address format is in use on the FR interface. The default is Q922
1.3.6.1.4.1.18.3.5.9.1.1.1.8	ColumnwfFrDlcmiAddressLen	read-write	mandatory	This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the address includeding the control po…
1.3.6.1.4.1.18.3.5.9.1.1.1.9	ColumnwfFrDlcmiPollingInterval	read-write	mandatory	The number of seconds between successive status enquiry messages
1.3.6.1.4.1.18.3.5.9.1.1.1.10	ColumnwfFrDlcmiFullEnquiryInterval	read-write	mandatory	The number of status enquiry intervals that pass before issuance of a full status enquiry message.
1.3.6.1.4.1.18.3.5.9.1.1.1.11	ColumnwfFrDlcmiErrorThreshold	read-write	mandatory	This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down.
1.3.6.1.4.1.18.3.5.9.1.1.1.12	ColumnwfFrDlcmiMonitoredEvents	read-write	mandatory	This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station…
1.3.6.1.4.1.18.3.5.9.1.1.1.13	ColumnwfFrDlcmiMaxSupportedVCs	read-only	mandatory	The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. The system sets this initially.
1.3.6.1.4.1.18.3.5.9.1.1.1.14	ColumnwfFrDlcmiMulticast	read-write	mandatory	This indicates whether the frame relay provider offers a multicast
1.3.6.1.4.1.18.3.5.9.1.1.1.15	ColumnwfFrDlcmiSeqCount	read-only	mandatory	This station's sequence counter. It represents the next value to send.
1.3.6.1.4.1.18.3.5.9.1.1.1.16	ColumnwfFrDlcmiLastReceived	read-only	mandatory	The sequence number just received from the switch.
1.3.6.1.4.1.18.3.5.9.1.1.1.17	ColumnwfFrDlcmiPassiveSeqCount	read-only	mandatory	This station's sequence counter for answering status enquiry.
1.3.6.1.4.1.18.3.5.9.1.1.1.18	ColumnwfFrDlcmiPassiveReceived	read-only	mandatory	The sequence number just received from the enquring station.
1.3.6.1.4.1.18.3.5.9.1.1.1.19	ColumnwfFrDlcmiPolls	read-only	mandatory	This is the counter of where we are in the polling cycle.
1.3.6.1.4.1.18.3.5.9.1.1.1.20	ColumnwfFrDlcmiAlarmTimer	read-only	mandatory	This is a counter of 1/2 second timeouts. When it reaches 2 x the polling interval, an enquiry message is sent.
1.3.6.1.4.1.18.3.5.9.1.1.1.21	ColumnwfFrErrType	read-only	mandatory	Indicate the type of the last specific monitored error.
1.3.6.1.4.1.18.3.5.9.1.1.1.22	ColumnwfFrErrData	read-only	mandatory	Contains as much of the error packet as possible.
1.3.6.1.4.1.18.3.5.9.1.1.1.23	ColumnwfFrErrTime	read-only	mandatory	The time the last error occurred.
1.3.6.1.4.1.18.3.5.9.1.1.1.24	ColumnwfFrErrDiscards	read-only	mandatory	The number of inbound frames dropped because of format or other errors or because the VC was not known.
1.3.6.1.4.1.18.3.5.9.1.1.1.25	ColumnwfFrErrDrops	read-only	mandatory	The number of outbound frames dropped. Usually this is due the specified DLCI being unknown or a broadcast packet is too long
1.3.6.1.4.1.18.3.5.9.1.2	TablewfFrCircuitTable	not-accessible	mandatory	Frame Relay Circuit table gives information about a virtual circuits.
1.3.6.1.4.1.18.3.5.9.1.2.1	RowwfFrCircuitEntry	not-accessible	mandatory	An entry in the Frame Relay Circuit table.
1.3.6.1.4.1.18.3.5.9.1.2.1.1	ColumnwfFrCircuitDelete	read-write	mandatory	Indication to delete this frame relay interface.
1.3.6.1.4.1.18.3.5.9.1.2.1.2	ColumnwfFrCircuitNumber	read-only	mandatory	Instance identifier. The circuit number of this interface.
1.3.6.1.4.1.18.3.5.9.1.2.1.3	ColumnwfFrCircuitDlci	read-only	mandatory	Instance identifier. This indicates which virtual circuit.
1.3.6.1.4.1.18.3.5.9.1.2.1.4	ColumnwfFrCircuitState	read-only	mandatory	Indicates the state of the particular virtual circuit.
1.3.6.1.4.1.18.3.5.9.1.2.1.5	ColumnwfFrCircuitStateSet	read-write	mandatory	User access for setting the state of a virtual circuit
1.3.6.1.4.1.18.3.5.9.1.2.1.6	ColumnwfFrCircuitReceivedFECNs	read-only	mandatory	Number of frames received indicating forward congestion.
1.3.6.1.4.1.18.3.5.9.1.2.1.7	ColumnwfFrCircuitReceivedBECNs	read-only	mandatory	Number of frames received indicating backward congestion.
1.3.6.1.4.1.18.3.5.9.1.2.1.8	ColumnwfFrCircuitSentFrames	read-only	mandatory	The number of frames sent from this virtual circuit.
1.3.6.1.4.1.18.3.5.9.1.2.1.9	ColumnwfFrCircuitSentOctets	read-only	mandatory	The number of octets sent from this virtual circuit.
1.3.6.1.4.1.18.3.5.9.1.2.1.10	ColumnwfFrCircuitReceivedFrames	read-only	mandatory	The number of frames received from this virtual circuit.
1.3.6.1.4.1.18.3.5.9.1.2.1.11	ColumnwfFrCircuitReceivedOctets	read-only	mandatory	The number of octets received from this virtual circuit.
1.3.6.1.4.1.18.3.5.9.1.2.1.12	ColumnwfFrCircuitCreationTime	read-only	mandatory	The value of sysUpTime when the vc was created.
1.3.6.1.4.1.18.3.5.9.1.2.1.13	ColumnwfFrCircuitLastTimeChange	read-only	mandatory	The value of sysUpTime when last there was a change in vc state.
1.3.6.1.4.1.18.3.5.9.1.2.1.14	ColumnwfFrCircuitCommittedBurst	read-write	mandatory	Indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval. Wellfleet does not…
1.3.6.1.4.1.18.3.5.9.1.2.1.15	ColumnwfFrCircuitExcessBurst	read-write	mandatory	Indicates teh maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. Wellfleet does not presently supp…
1.3.6.1.4.1.18.3.5.9.1.2.1.16	ColumnwfFrCircuitThroughput	read-write	mandatory	This is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the m…
1.3.6.1.4.1.18.3.5.9.1.2.1.17	ColumnwfFrCircuitMulticast	read-write	mandatory	Indicates whether this DLCI is used for multicast or single destination.
1.3.6.1.4.1.18.3.5.9.1.2.1.18	ColumnwfFrCircuitDiscards	read-only	mandatory	The number of inbound frames discarded because of format errors, because the VC is inactive or because the protocol was not registered for this circuit.
1.3.6.1.4.1.18.3.5.9.1.2.1.19	ColumnwfFrCircuitDrops	read-only	mandatory	Indicates how many outbound frames were dropped. Usually these are dropped because the VC is not active.
1.3.6.1.4.1.18.3.5.9.1.2.1.20	ColumnwfFrCircuitSubCct	read-write	mandatory	Circuit number to use for this VC when configured in hybrid (for bridging) or direct access (VC as a circuit) mode.
1.3.6.1.4.1.18.3.5.9.1.2.1.21	ColumnwfFrCircuitMode	read-write	mandatory	The mode of the given VC. GROUP - treats the VC as one of many vc's on a circuit. HYBRID - treats the VC as one of many vc's on a circuit for protocol traffic,…
1.3.6.1.4.1.18.3.5.9.2	NodewfPppGroup
1.3.6.1.4.1.18.3.5.9.3	TablewfSmdsCircuitTable	not-accessible	mandatory	The Wellfleet SMDS Circuit Record
1.3.6.1.4.1.18.3.5.9.3.1	RowwfSmdsCircuitEntry	not-accessible	mandatory	per Wellfleet circuit SMDS configuration parameters and counters
1.3.6.1.4.1.18.3.5.9.3.1.1	ColumnwfSmdsCircuitDelete	read-write	mandatory	create/delete parameter, dflt = created
1.3.6.1.4.1.18.3.5.9.3.1.2	ColumnwfSmdsCircuitDisable	read-write	mandatory	enable/disable parameter, dflt = enabled
1.3.6.1.4.1.18.3.5.9.3.1.3	ColumnwfSmdsCircuitState	read-only	mandatory	SMDS state variable, Up, Down Init, Not Present
1.3.6.1.4.1.18.3.5.9.3.1.4	ColumnwfSmdsCircuitID	read-only	mandatory	cct number for this instance
1.3.6.1.4.1.18.3.5.9.3.1.5	ColumnwfSmdsCircuitIndivAddr	read-write	mandatory	SMDS E.164 Individual address for this Wellfleet circuit - must be 8 octets long
1.3.6.1.4.1.18.3.5.9.3.1.6	ColumnwfSmdsCircuitGroupAddr	read-write	mandatory	SMDS E.164 Group address for this Wellfleet circuit - must be 8 octets long
1.3.6.1.4.1.18.3.5.9.3.1.7	ColumnwfSmdsCircuitArpAddr	read-write	mandatory	SMDS E.164 ARP address for this Wellfleet circuit - must be 8 octets long
1.3.6.1.4.1.18.3.5.9.3.1.8	ColumnwfSmdsCircuitDisableHrtbtPoll	read-write	mandatory	determine use of DXI heartbeat poll
1.3.6.1.4.1.18.3.5.9.3.1.9	ColumnwfSmdsCircuitHrtbtPollInterval	read-write	mandatory	heartbeat polling messages get sent every this many seconds - we don't want the polling interval to be less than or equal to the unacknowledgment timer, which …
1.3.6.1.4.1.18.3.5.9.3.1.10	ColumnwfSmdsCircuitHrtbtPollDownCount	read-write	mandatory	if this many consecutive heartbeat polling messages go unacknowledged, log an event declaring the line down
1.3.6.1.4.1.18.3.5.9.3.1.11	ColumnwfSmdsCircuitDisableNetMgmt	read-write	mandatory	determine use of LMI network management
1.3.6.1.4.1.18.3.5.9.3.1.12	ColumnwfSmdsCircuitSipL3ReceivedIndividualDAs	read-only	mandatory	The total number of individually addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs.
1.3.6.1.4.1.18.3.5.9.3.1.13	ColumnwfSmdsCircuitSipL3ReceivedGAs	read-only	mandatory	The total number of group addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs.
1.3.6.1.4.1.18.3.5.9.3.1.14	ColumnwfSmdsCircuitSipL3SentIndividualDAs	read-only	mandatory	The number of individually addressed SIP Level 3 PDUs that have been sent by this system across the SNI.
1.3.6.1.4.1.18.3.5.9.3.1.15	ColumnwfSmdsCircuitSipL3SentGAs	read-only	mandatory	The number of group addressed SIP L3PDUs that have been sent by this system across the SNI.
1.3.6.1.4.1.18.3.5.9.3.1.16	ColumnwfSmdsCircuitSipL3VersionSupport	read-only	mandatory	A value which indicates the version(s) of SIP that this interface supports. The value is a sum. This sum initially takes the value zero. For each version, V, t…
1.3.6.1.4.1.18.3.5.9.4	NodewfX25Group
1.3.6.1.4.1.18.3.5.9.5	NodewfAtmGroup
1.3.6.1.4.1.18.3.5.10	NodewfXnsGroup
1.3.6.1.4.1.18.3.5.10.1	NodewfXnsBase
1.3.6.1.4.1.18.3.5.10.1.1	ScalarwfXnsBaseDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete XNS.
1.3.6.1.4.1.18.3.5.10.1.2	ScalarwfXnsBaseDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable XNS.
1.3.6.1.4.1.18.3.5.10.1.3	ScalarwfXnsBaseState	read-only	mandatory	The current state of the entire XNS.
1.3.6.1.4.1.18.3.5.10.1.4	ScalarwfXnsBaseHostNumber	read-write	mandatory	Host Number of Router and potential MAC address of box.
1.3.6.1.4.1.18.3.5.10.2	TablewfXnsBaseRtEntryTable	not-accessible	mandatory	The table of Elements in XNS's routing table
1.3.6.1.4.1.18.3.5.10.2.1	RowwfXnsBaseRtEntry	not-accessible	mandatory	An entry in the Routing Table
1.3.6.1.4.1.18.3.5.10.2.1.1	ColumnwfXnsBaseRouteDest	read-only	mandatory	The destination XNS address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear i…
1.3.6.1.4.1.18.3.5.10.2.1.2	ColumnwfXnsBaseRouteIfIndex	read-only	mandatory	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu…
1.3.6.1.4.1.18.3.5.10.2.1.3	ColumnwfXnsBaseRouteMetric	read-only	mandatory	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If …
1.3.6.1.4.1.18.3.5.10.2.1.4	ColumnwfXnsBaseRouteNextHopNetwork	read-only	mandatory	(In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's XNS address on that interface.)
1.3.6.1.4.1.18.3.5.10.2.1.5	ColumnwfXnsBaseRouteNextHopHost	read-only	mandatory	Full network.host_id address of nexthop host for this network.
1.3.6.1.4.1.18.3.5.10.2.1.6	ColumnwfXnsBaseRouteType	read-only	mandatory	The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the XNS architecture. Setting this obje…
1.3.6.1.4.1.18.3.5.10.2.1.7	ColumnwfXnsBaseRouteProto	read-only	mandatory	The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th…
1.3.6.1.4.1.18.3.5.10.2.1.8	ColumnwfXnsBaseRouteAge	read-only	mandatory	The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug…
1.3.6.1.4.1.18.3.5.10.2.1.9	ColumnwfXnsBaseRouteInfo	read-only	mandatory	A user-defined string which describes this Route entry
1.3.6.1.4.1.18.3.5.10.3	TablewfXnsInterfaceTable	not-accessible	mandatory	The network interface record
1.3.6.1.4.1.18.3.5.10.3.1	RowwfXnsInterfaceEntry	not-accessible	mandatory	An entry in the Routing Table
1.3.6.1.4.1.18.3.5.10.3.1.1	ColumnwfXnsInterfaceIndex	read-only	mandatory	A unique value for each XNS interface. Its value ranges between 1 and the value of MAXCIRCUITS.
1.3.6.1.4.1.18.3.5.10.3.1.2	ColumnwfXnsInterfaceDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an XNS interface.
1.3.6.1.4.1.18.3.5.10.3.1.3	ColumnwfXnsInterfaceDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an XNS interface.
1.3.6.1.4.1.18.3.5.10.3.1.4	ColumnwfXnsInterfaceState	read-only	mandatory	The current state of the XNS interface
1.3.6.1.4.1.18.3.5.10.3.1.5	ColumnwfXnsInterfaceCircuit	read-only	mandatory	The Circuit Number that this interface runs over
1.3.6.1.4.1.18.3.5.10.3.1.6	ColumnwfXnsInterfaceNetworkNumber	read-only	mandatory	The XNS Address to which this entry's addressing information pertains
1.3.6.1.4.1.18.3.5.10.3.1.7	ColumnwfXnsInterfaceCost	read-write	mandatory	The Cost associated with the XNS Address of this entry
1.3.6.1.4.1.18.3.5.10.3.1.8	ColumnwfXnsInterfaceXsumOn	read-write	mandatory	Flag for checksums
1.3.6.1.4.1.18.3.5.10.3.1.9	ColumnwfXnsInterfaceEncaps	read-only	mandatory	If changed while router is running yowsa !!!!
1.3.6.1.4.1.18.3.5.10.3.1.10	ColumnwfXnsInterfaceMacAddress	read-write	mandatory	The MacAddress of this interface this port will receive or transmit.
1.3.6.1.4.1.18.3.5.10.3.1.11	ColumnwfXnsInterfaceSMDSGroupAddress	read-write	mandatory	The SMDS Group Address of this interface this port will receive or transmit.
1.3.6.1.4.1.18.3.5.10.3.1.12	ColumnwfXnsInterfaceMaxInfo	read-only	mandatory	The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
1.3.6.1.4.1.18.3.5.10.3.1.13	ColumnwfXnsInterfaceExtServer	read-write	mandatory	Flag indicating if this interface has External server capabilities turned on. Allows interface to pass on defined packets, such as PEP/TP requests, to a remote…
1.3.6.1.4.1.18.3.5.10.3.1.14	ColumnwfXnsInterfaceExServNetwork	read-write	mandatory	The Network address of the remote server.
1.3.6.1.4.1.18.3.5.10.3.1.15	ColumnwfXnsInterfaceExServHostId	read-write	mandatory	The Host ID of the remote server.
1.3.6.1.4.1.18.3.5.10.3.1.16	ColumnwfXnsInterfaceExServPktType	read-write	mandatory	The packet type of the requests which are to be passed on to the specified remote server.
1.3.6.1.4.1.18.3.5.10.3.1.17	ColumnwfXnsInterfaceExServSockNm	read-write	mandatory	The destination socket number of the requests which are to be passed on to the specified remote server. If no socket number is specified then all packets of th…
1.3.6.1.4.1.18.3.5.10.3.1.18	ColumnwfXnsInterfaceInReceives	read-only	mandatory	The total number of input datagrams received from interfaces, including those received in error.
1.3.6.1.4.1.18.3.5.10.3.1.19	ColumnwfXnsInterfaceInHdrErrors	read-only	mandatory	The number of input datagrams discarded due to errors in their XNS headers, including bad checksums, version number mismatch, other format errors, time-to-live…
1.3.6.1.4.1.18.3.5.10.3.1.20	ColumnwfXnsInterfaceInAddrErrors	read-only	mandatory	The number of input datagrams discarded because the XNS address in their XNS header's destination field was not a valid address to be received at this entity. …
1.3.6.1.4.1.18.3.5.10.3.1.21	ColumnwfXnsInterfaceForwDatagrams	read-only	mandatory	The number of input datagrams for which this entity was not their final XNS destination, as a result of which an attempt was made to find a route to forward th…
1.3.6.1.4.1.18.3.5.10.3.1.22	ColumnwfXnsInterfaceInUnknownProtos	read-only	mandatory	The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
1.3.6.1.4.1.18.3.5.10.3.1.23	ColumnwfXnsInterfaceInDiscards	read-only	mandatory	The number of input XNS datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buf…
1.3.6.1.4.1.18.3.5.10.3.1.24	ColumnwfXnsInterfaceInDelivers	read-only	mandatory	The total number of input datagrams successfully delivered to XNS user-protocols (including ICMP).
1.3.6.1.4.1.18.3.5.10.3.1.25	ColumnwfXnsInterfaceOutRequests	read-only	mandatory	The total number of XNS datagrams which local XNS user-protocols supplied to XNS in requests for transmission. Note that this counter does not include any data…
1.3.6.1.4.1.18.3.5.10.3.1.26	ColumnwfXnsInterfaceOutDiscards	read-only	mandatory	The number of output XNS datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for…
1.3.6.1.4.1.18.3.5.10.3.1.27	ColumnwfXnsInterfaceOutNoRoutes	read-only	mandatory	The number of XNS datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counte…
1.3.6.1.4.1.18.3.5.10.3.1.28	ColumnwfXnsInterfaceFRBcast	read-write	mandatory	Configurable Frame Relay broadcast address
1.3.6.1.4.1.18.3.5.10.3.1.29	ColumnwfXnsInterfaceFRMcast	read-write	mandatory	Configurable Frame Relay multicast address
1.3.6.1.4.1.18.3.5.10.4	TablewfXnsRipIntfTable	not-accessible	mandatory	The list of RIP interfaces
1.3.6.1.4.1.18.3.5.10.4.1	RowwfXnsRipIntfEntry	not-accessible	mandatory	An entry in the Routing Table
1.3.6.1.4.1.18.3.5.10.4.1.1	ColumnwfXnsRipInterfaceDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an RIP Interface instance.
1.3.6.1.4.1.18.3.5.10.4.1.2	ColumnwfXnsRipInterfaceDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable a RIP instance.
1.3.6.1.4.1.18.3.5.10.4.1.3	ColumnwfXnsRipInterfaceState	read-only	mandatory	The current state of RIP on this interface.
1.3.6.1.4.1.18.3.5.10.4.1.4	ColumnwfXnsRipInterfaceIndex	read-only	mandatory	The XNS interface to run RIP on.
1.3.6.1.4.1.18.3.5.10.4.1.5	ColumnwfXnsRipInterfaceSupply	read-write	mandatory	Transmit RIP packets.
1.3.6.1.4.1.18.3.5.10.4.1.6	ColumnwfXnsRipInterfaceListen	read-write	mandatory	Receive RIP packets.
1.3.6.1.4.1.18.3.5.10.5	TablewfXnsAdjacentHostTable	not-accessible	mandatory	must be configured for a nexthop host.
1.3.6.1.4.1.18.3.5.10.5.1	RowwfXnsAdjacentHostEntry	not-accessible	mandatory	An entry in the Adjacent Host Table
1.3.6.1.4.1.18.3.5.10.5.1.1	ColumnwfXnsAhDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX Static Host.
1.3.6.1.4.1.18.3.5.10.5.1.2	ColumnwfXnsAhDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX Static Route.
1.3.6.1.4.1.18.3.5.10.5.1.3	ColumnwfXnsAhTargHostNetwork	read-only	mandatory	The network address of the static host.
1.3.6.1.4.1.18.3.5.10.5.1.4	ColumnwfXnsAhTargHostId	read-only	mandatory	The Address of this static host.
1.3.6.1.4.1.18.3.5.10.5.1.5	ColumnwfXnsAhNextHopIntf	read-write	mandatory	The Next Hop Interface Network Address
1.3.6.1.4.1.18.3.5.10.5.1.6	ColumnwfXnsAhDlci	read-write	mandatory	The next Hop Host address
1.3.6.1.4.1.18.3.5.10.6	TablewfXnsStaticRouteTable	not-accessible	mandatory	The list of Adjacent Hosts used for Configuring XNS
1.3.6.1.4.1.18.3.5.10.6.1	RowwfXnsStaticRouteEntry	not-accessible	mandatory	An entry in the Host Table
1.3.6.1.4.1.18.3.5.10.6.1.1	ColumnwfXnsSrDelete	read-write	mandatory	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the XNS Static Route.
1.3.6.1.4.1.18.3.5.10.6.1.2	ColumnwfXnsSrDisable	read-write	mandatory	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this XNS Static Route.
1.3.6.1.4.1.18.3.5.10.6.1.3	ColumnwfXnsSrTargNetwork	read-only	mandatory	The Address of this static route
1.3.6.1.4.1.18.3.5.10.6.1.4	ColumnwfXnsSrCost	read-write	mandatory	The Cost of this Static Route
1.3.6.1.4.1.18.3.5.10.6.1.5	ColumnwfXnsSrNextHopNetwork	read-only	mandatory	The Next Hop XNS Address
1.3.6.1.4.1.18.3.5.10.6.1.6	ColumnwfXnsSrNextHopHost	read-write	mandatory	The next Hop Host address
1.3.6.1.4.1.18.3.5.10.6.1.7	ColumnwfXnsSrTargNetworkRt	read-only	mandatory	The Route Identifier Which numbered route this is to be
1.3.6.1.4.1.18.3.5.10.7	TablewfXnsTrafficFilterTable	not-accessible	mandatory	XNS Traffic Filters
1.3.6.1.4.1.18.3.5.10.7.1	RowwfXnsTrafficFilterEntry	not-accessible	mandatory	A traffic filter definition
1.3.6.1.4.1.18.3.5.10.7.1.1	ColumnwfXnsTrafficFilterCreate	read-write	mandatory	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
1.3.6.1.4.1.18.3.5.10.7.1.2	ColumnwfXnsTrafficFilterEnable	read-write	mandatory	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
1.3.6.1.4.1.18.3.5.10.7.1.3	ColumnwfXnsTrafficFilterStatus	read-only	mandatory	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error…
1.3.6.1.4.1.18.3.5.10.7.1.4	ColumnwfXnsTrafficFilterCounter	read-only	mandatory	The number of received packets that have matched this rule.
1.3.6.1.4.1.18.3.5.10.7.1.5	ColumnwfXnsTrafficFilterDefinition	read-write	mandatory	The filter rule definition.
1.3.6.1.4.1.18.3.5.10.7.1.6	ColumnwfXnsTrafficFilterReserved	not-accessible	mandatory	Reserved field.
1.3.6.1.4.1.18.3.5.10.7.1.7	ColumnwfXnsTrafficFilterInterface	read-only	mandatory	The network address of the XNS interface to which this filter is applied.
1.3.6.1.4.1.18.3.5.10.7.1.8	ColumnwfXnsTrafficFilterCircuit	read-only	mandatory	The ID of the Circuit to which the filter is applied.
1.3.6.1.4.1.18.3.5.10.7.1.9	ColumnwfXnsTrafficFilterRuleNumber	read-only	mandatory	ID for the rule.
1.3.6.1.4.1.18.3.5.10.7.1.10	ColumnwfXnsTrafficFilterFragment	read-only	mandatory	Fragment number - for large rules.
1.3.6.1.4.1.18.3.5.11	NodewfTestGroup

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

Wellfleet-Series7-MIB

Bulk Translate

Search Vendor MIBs

Search Vendor Traps