Wellfleet-TOKEN-RING-MIB
77 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.2 | TablewfTokenRingTable | not-accessible | mandatory | TOKEN RING line record |
| 1.3.6.1.4.1.18.3.4.2.1 | RowwfTokenRingEntry | not-accessible | mandatory | An entry in the token table |
| 1.3.6.1.4.1.18.3.4.2.1.1 | ColumnwfTokenRingDelete | read-write | mandatory | create/delete parameter. |
| 1.3.6.1.4.1.18.3.4.2.1.2 | ColumnwfTokenRingDisable | read-write | mandatory | enable/disable parameter. |
| 1.3.6.1.4.1.18.3.4.2.1.3 | ColumnwfTokenRingState | read-only | mandatory | line driver state variable, Not Present, Init, Down, Up |
| 1.3.6.1.4.1.18.3.4.2.1.4 | ColumnwfTokenRingSlot | read-only | mandatory | instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.2.1.5 | ColumnwfTokenRingConnector | read-only | mandatory | instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined… |
| 1.3.6.1.4.1.18.3.4.2.1.6 | ColumnwfTokenRingCct | read-write | mandatory | cct number for this line instance, configuration required |
| 1.3.6.1.4.1.18.3.4.2.1.7 | ColumnwfTokenRingMtu | read-only | mandatory | mtu parameter, fixed. This mtu of 4568 allows a type 3 Source Route Frame (info=4472) to be IP encapsulated over Token Ring. The components are: AC_FC (2) + SN… |
| 1.3.6.1.4.1.18.3.4.2.1.8 | ColumnwfTokenRingMadr | read-only | mandatory | line MAC address, line driver fills in the currently used 48 bit MAC address. |
| 1.3.6.1.4.1.18.3.4.2.1.9 | ColumnwfTokenRingCfgMadr | read-write | mandatory | Configured line MAC address. Only used if wfTokenRingMadrSelect is set appropriately. |
| 1.3.6.1.4.1.18.3.4.2.1.10 | ColumnwfTokenRingMadrSelect | read-write | mandatory | Selector determines which MAC address the interface will use. |
| 1.3.6.1.4.1.18.3.4.2.1.11 | ColumnwfTokenRingSpeed | read-write | mandatory | Token Ring speed parameter - 4 and 16 Mbps are only valid values |
| 1.3.6.1.4.1.18.3.4.2.1.12 | ColumnwfTokenRingEarlyTokenRelease | read-write | mandatory | Early Token Release parameter, only valid with 16Mbps |
| 1.3.6.1.4.1.18.3.4.2.1.13 | ColumnwfTokenRingStatus | read-only | mandatory | The current interface status. This attribute is only valid when the wfTokenRingOpenState attribute is set to OPENED. The attribute's value is a sum of values, … |
| 1.3.6.1.4.1.18.3.4.2.1.14 | ColumnwfTokenRingOpenState | read-only | mandatory | The current interface state with respect to entering or leaving the ring. |
| 1.3.6.1.4.1.18.3.4.2.1.15 | ColumnwfTokenRingOpenStatus | read-only | mandatory | Indicates the success, or the reason for failure, of the station's most recent attempt to enter the ring. |
| 1.3.6.1.4.1.18.3.4.2.1.16 | ColumnwfTokenRingUpStream | read-only | mandatory | MAC address of Up Stream neighbor. Only valid when 'opened'. |
| 1.3.6.1.4.1.18.3.4.2.1.17 | ColumnwfTokenRingRxOctets | read-only | mandatory | Number of octets received without error. |
| 1.3.6.1.4.1.18.3.4.2.1.18 | ColumnwfTokenRingRxFrames | read-only | mandatory | Number of frames received without error. |
| 1.3.6.1.4.1.18.3.4.2.1.19 | ColumnwfTokenRingTxOctets | read-only | mandatory | Number of octets transmitted without error. |
| 1.3.6.1.4.1.18.3.4.2.1.20 | ColumnwfTokenRingTxFrames | read-only | mandatory | Number of frames transmitted without error. |
| 1.3.6.1.4.1.18.3.4.2.1.21 | ColumnwfTokenRingInDiscards | read-only | mandatory | Number of error-free inbound packets discarded. Usually due to lack of memory resources. This is equivalent to wfTokenRingRxCongestionErrors. |
| 1.3.6.1.4.1.18.3.4.2.1.22 | ColumnwfTokenRingInErrors | read-only | mandatory | Number of inbound packets not delivered to higher-layer protocol due to errors. The sum of wfTokenRingLineErrors and wfTokenRingBurstErrors. |
| 1.3.6.1.4.1.18.3.4.2.1.23 | ColumnwfTokenRingOutDiscards | read-only | mandatory | Number of error-free outbound packets discarded. Usually due to lack of transmission bandwidth. This is equivalent to wfTokenRingTxClipFrames. |
| 1.3.6.1.4.1.18.3.4.2.1.24 | ColumnwfTokenRingOutErrors | read-only | mandatory | Number of outbound packets that could not be transmitted because of errors. This is equivalent to wfTokenRingLostFrameErrors. |
| 1.3.6.1.4.1.18.3.4.2.1.25 | ColumnwfTokenRingTxClipFrames | read-only | mandatory | Number of frames clipped in driver's transmit routine due to transmit congestion. |
| 1.3.6.1.4.1.18.3.4.2.1.26 | ColumnwfTokenRingRxReplenMisses | read-only | mandatory | Number of packet buffer misses while attempting to replenish driver receive ring. |
| 1.3.6.1.4.1.18.3.4.2.1.27 | ColumnwfTokenRingSignalLosses | read-only | mandatory | Number of ring signal losses detected. |
| 1.3.6.1.4.1.18.3.4.2.1.28 | ColumnwfTokenRingHardErrors | read-only | mandatory | Number of events causing the adapter to transmit or receive beacon MAC frames. |
| 1.3.6.1.4.1.18.3.4.2.1.29 | ColumnwfTokenRingSoftErrors | read-only | mandatory | Number of soft errors. Corresponds to the number of Report Error MAC frames transmitted by this station. |
| 1.3.6.1.4.1.18.3.4.2.1.30 | ColumnwfTokenRingTransmitBeacons | read-only | mandatory | Number of events causing the adapter to transmit beacon frames. |
| 1.3.6.1.4.1.18.3.4.2.1.31 | ColumnwfTokenRingLobeWireFaults | read-only | mandatory | Number of opens or shorts (cable faults) between the adapter and the MAU. |
| 1.3.6.1.4.1.18.3.4.2.1.32 | ColumnwfTokenRingAutoRemovalErrors | read-only | mandatory | Number of lobe wrap test failures during beacon auto_removal process. |
| 1.3.6.1.4.1.18.3.4.2.1.33 | ColumnwfTokenRingRequestRemoves | read-only | mandatory | Number of Remove Ring Station MAC frames received. Each frame causes this station to leave the ring. |
| 1.3.6.1.4.1.18.3.4.2.1.34 | ColumnwfTokenRingCounterOverflows | read-only | mandatory | Number of adapter error counter overflows. |
| 1.3.6.1.4.1.18.3.4.2.1.35 | ColumnwfTokenRingSingleStations | read-only | mandatory | Number of ring status change interrupts while adapter is only station on the ring. |
| 1.3.6.1.4.1.18.3.4.2.1.36 | ColumnwfTokenRingRingRecoveries | read-only | mandatory | Number of claim token MAC frames (ring recoveries) observed on the ring. |
| 1.3.6.1.4.1.18.3.4.2.1.37 | ColumnwfTokenRingAdapterChecks | read-only | mandatory | Number of internal adapter errors that result in adapter crashes. |
| 1.3.6.1.4.1.18.3.4.2.1.38 | ColumnwfTokenRingFirstAdapterCheckCode | read-only | mandatory | Adapter Check Code of first occurrence. |
| 1.3.6.1.4.1.18.3.4.2.1.39 | ColumnwfTokenRingLastAdapterCheckCode | read-only | mandatory | Adapter Check Code of most recent (last) occurrence. |
| 1.3.6.1.4.1.18.3.4.2.1.40 | ColumnwfTokenRingLineErrors | read-only | mandatory | Number of frames copied or repeated by this station with bad format or an FCS error. |
| 1.3.6.1.4.1.18.3.4.2.1.41 | ColumnwfTokenRingBurstErrors | read-only | mandatory | Number of errored frames with no transition for 5 1/2 bit times. |
| 1.3.6.1.4.1.18.3.4.2.1.42 | ColumnwfTokenRingAriFciErrors | read-only | mandatory | Number of occurrences of this station receiving both an AMP MAC frame and a SMP MAC frame with the a & c bits clear or more than one SMP MAC frame with the a &… |
| 1.3.6.1.4.1.18.3.4.2.1.43 | ColumnwfTokenRingLostFrameErrors | read-only | mandatory | Number of frames being stripped which are missing their tails. |
| 1.3.6.1.4.1.18.3.4.2.1.44 | ColumnwfTokenRingRxCongestionErrors | read-only | mandatory | Number of frames dropped due to receive congestion. |
| 1.3.6.1.4.1.18.3.4.2.1.45 | ColumnwfTokenRingFrameCopiedErrors | read-only | mandatory | Number of specifically addressed frames for this station that had their a & c bits previously set. |
| 1.3.6.1.4.1.18.3.4.2.1.46 | ColumnwfTokenRingTokenErrors | read-only | mandatory | Number of token protocol errors. Only relevant when this station is the active monitor. |
| 1.3.6.1.4.1.18.3.4.2.1.47 | ColumnwfTokenRingDmaBusErrors | read-only | mandatory | Number of bus errors during DMA that do not exceed threshold. |
| 1.3.6.1.4.1.18.3.4.2.1.48 | ColumnwfTokenRingDmaParityErrors | read-only | mandatory | Number of parity errors during DMA that do not exceed threshold. |
| 1.3.6.1.4.1.18.3.4.2.1.49 | ColumnwfTokenRingSrbNotFreeCmdAborts | read-only | mandatory | Number of host to adapter commands aborted because of in-completed in process commands. |
| 1.3.6.1.4.1.18.3.4.2.1.50 | ColumnwfTokenRingRxProcessings | read-only | mandatory | Number of processings of received frames (similar to RINT). |
| 1.3.6.1.4.1.18.3.4.2.1.51 | ColumnwfTokenRingTxProcessings | read-only | mandatory | Number of processings of frames for transmit. |
| 1.3.6.1.4.1.18.3.4.2.1.52 | ColumnwfTokenRingTxCmplProcessings | read-only | mandatory | Number of processings of transmitted frames (similar to TINT). |
| 1.3.6.1.4.1.18.3.4.2.1.53 | ColumnwfTokenRingRxTimeouts | read-only | mandatory | Number of re-initializations due to receiver time-outs. |
| 1.3.6.1.4.1.18.3.4.2.1.54 | ColumnwfTokenRingCmdTimeouts | read-only | mandatory | Number of re-initializations due to command time-outs. |
| 1.3.6.1.4.1.18.3.4.2.1.55 | ColumnwfTokenRingRxHostIntErrors | read-only | mandatory | Number of re-initializations due to receive host interface errors. |
| 1.3.6.1.4.1.18.3.4.2.1.56 | ColumnwfTokenRingRxTxBufferSize | read-only | mandatory | Internal Adapter RAM buffer size. |
| 1.3.6.1.4.1.18.3.4.2.1.57 | ColumnwfTokenRingCfgTxQueueLength | read-write | mandatory | Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based … |
| 1.3.6.1.4.1.18.3.4.2.1.58 | ColumnwfTokenRingCfgRxQueueLength | read-write | mandatory | Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based d… |
| 1.3.6.1.4.1.18.3.4.2.1.59 | ColumnwfTokenRingTxQueueLength | read-only | mandatory | Current Transmit Queue Length. |
| 1.3.6.1.4.1.18.3.4.2.1.60 | ColumnwfTokenRingRxQueueLength | read-only | mandatory | Current Receive Queue Length. |
| 1.3.6.1.4.1.18.3.4.2.1.61 | ColumnwfTokenRingMacRxOctets | read-only | mandatory | Number of Mac frame octets received without error. |
| 1.3.6.1.4.1.18.3.4.2.1.62 | ColumnwfTokenRingMacRxFrames | read-only | mandatory | Number of Mac frames received without error. |
| 1.3.6.1.4.1.18.3.4.2.1.63 | ColumnwfTokenRingCfgFunctionalAddress | read-write | mandatory | The configurable bit mask of all Token Ring Functional addresses for which this interface will accept frames. This value is loaded into the func addr defined i… |
| 1.3.6.1.4.1.18.3.4.2.1.64 | ColumnwfTokenRingFunctionalAddress | read-only | mandatory | The bit mask of all Token Ring Functional addresses for which this interface will accept frames. |
| 1.3.6.1.4.1.18.3.4.2.1.65 | ColumnwfTokenRingGroupAddress | read-only | mandatory | The single Token Ring Group address for which this interface will accept frames. |
| 1.3.6.1.4.1.18.3.4.2.1.66 | ColumnwfTokenRingLineNumber | read-write | mandatory | Logical line number associated with this driver entity. |
| 1.3.6.1.4.1.18.3.4.2.1.67 | ColumnwfTokenRingMacCode | read-only | mandatory | Type and version of microcode running on the TMS380. |
| 1.3.6.1.4.1.18.3.4.2.1.68 | ColumnwfTokenRingModule | read-only | mandatory | Module number for ASN platform, filled in by driver. For non-ASN platforms this attribute will not be used. |
| 1.3.6.1.4.1.18.3.4.2.1.69 | ColumnwfTokenRingActualConnector | read-only | mandatory | Actual connector number for ASN platform, filled in by driver. For non-ASN platforms this attribute will not be used. |
| 1.3.6.1.4.1.18.3.4.2.1.70 | ColumnwfTokenRingLastChange | read-only | mandatory | The value of SysUpTime at the time the interface entered it's current operational state (UP state). SysUpTime is defined as the time (in hundredths of a second… |
| 1.3.6.1.4.1.18.3.4.2.1.71 | ColumnwfTokenRingOutQLen | read-only | mandatory | The instantaneous current length of the output packet queue (in packets). |
| 1.3.6.1.4.1.18.3.4.2.1.72 | ColumnwfTokenRingForceMacCode | read-write | mandatory | Selector determines which microcode will be downloaded for the TMS380. |
| 1.3.6.1.4.1.18.3.4.2.1.73 | ColumnwfTokenRingMSBMadr | read-only | mandatory | Provides this interface's MAC address in Most Significant Bit (MSB) format. This format is also referred to as Token Ring or IBM format. This MAC address is th… |
| 1.3.6.1.4.1.18.3.4.2.1.74 | ColumnwfTokenRingTurboBoflDebug | read-write | mandatory | Special Turbo-BOFL debug mechanism to be used by Engineering and Manufacturing only. 31-24 : TMO - period of breath (amount of time between successive breaths … |
| 1.3.6.1.4.1.18.3.4.2.1.75 | ColumnwfTokenRingSingleStatDis | read-write | mandatory | Enable/Disable the single station mode |