Wellfleet-WEP-MIB
60 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.28.1 | TablewfWepLineTable | not-accessible | mandatory | The line table contains line entries. |
| 1.3.6.1.4.1.18.3.4.28.1.1 | RowwfWepLineEntry | not-accessible | mandatory | A line entry corresponds to a sync line. |
| 1.3.6.1.4.1.18.3.4.28.1.1.1 | ColumnwfWepLineDelete | read-write | mandatory | Indicates whether the instance has been created or deleted. |
| 1.3.6.1.4.1.18.3.4.28.1.1.2 | ColumnwfWepLineDisable | read-only | mandatory | Indicates whether the instance has been enabled or disabled. |
| 1.3.6.1.4.1.18.3.4.28.1.1.3 | ColumnwfWepLineLineNumber | read-only | mandatory | Indicates the line number of this line entry. This is part of the instance ID. |
| 1.3.6.1.4.1.18.3.4.28.1.1.4 | ColumnwfWepLineLLIndex | read-only | mandatory | Indicates the lower layer index of this line entry. This is part of the instance ID. |
| 1.3.6.1.4.1.18.3.4.28.1.1.5 | ColumnwfWepLineCipherMode | read-only | mandatory | Indicates the encryption mode. This is represented by the following 'bit mask' values: DES 40-bit keys 0x20000000 DES 56-bit keys 0x10000000 |
| 1.3.6.1.4.1.18.3.4.28.1.1.6 | ColumnwfWepLineTekChangeByte | read-only | mandatory | Frequency of traffic encryption key change, based upon number of bytes encrypted; in operation, this is effectively rounded up to the next full packet. Note th… |
| 1.3.6.1.4.1.18.3.4.28.1.1.7 | ColumnwfWepLineTekChangeTime | read-only | mandatory | Frequency of traffic encryption key change, based upon number of seconds elapsed since last key change; in operation, this is effectively rounded up to the nex… |
| 1.3.6.1.4.1.18.3.4.28.2 | TablewfWepCircuitTable | not-accessible | mandatory | The circuit table contains circuit entries. |
| 1.3.6.1.4.1.18.3.4.28.2.1 | RowwfWepCircuitEntry | not-accessible | mandatory | A circuit entry corresponds to a circuit. |
| 1.3.6.1.4.1.18.3.4.28.2.1.1 | ColumnwfWepCircuitDelete | read-write | mandatory | Indicates whether the instance has been created or deleted. |
| 1.3.6.1.4.1.18.3.4.28.2.1.2 | ColumnwfWepCircuitDisable | read-only | mandatory | Indicates whether the instance has been enabled or disabled. |
| 1.3.6.1.4.1.18.3.4.28.2.1.3 | ColumnwfWepCircuitId | read-only | mandatory | Indicates the circuit ID of this entry. |
| 1.3.6.1.4.1.18.3.4.28.2.1.4 | ColumnwfWepCircuitCipherMode | read-only | mandatory | Indicates the encryption mode. This is represented by the following 'bit mask' values: Inherit from line 0x40000000 DES 40-bit keys 0x20000000 DES 56-bit keys … |
| 1.3.6.1.4.1.18.3.4.28.2.1.5 | ColumnwfWepCircuitTekChangeByte | read-only | mandatory | Frequency of traffic encryption key change, based upon number of bytes encrypted; in operation, this is effectively rounded up to the next full packet. Note th… |
| 1.3.6.1.4.1.18.3.4.28.2.1.6 | ColumnwfWepCircuitTekChangeTime | read-only | mandatory | Frequency of traffic encryption key change, based upon number of seconds elapsed since last key change; in operation, this is effectively rounded up to the nex… |
| 1.3.6.1.4.1.18.3.4.28.3 | TablewfWepVcTable | not-accessible | mandatory | The VC table contains VC entries |
| 1.3.6.1.4.1.18.3.4.28.3.1 | RowwfWepVcEntry | not-accessible | mandatory | A VC entry corresponds to a logical connection of the WEP. |
| 1.3.6.1.4.1.18.3.4.28.3.1.1 | ColumnwfWepVcLineNumber | read-only | mandatory | Indicates the line number of this VC entry. This is part of the instance ID. |
| 1.3.6.1.4.1.18.3.4.28.3.1.2 | ColumnwfWepVcLLIndex | read-only | mandatory | Indicates the lower layer index of this VC entry. This is part of the instance ID. |
| 1.3.6.1.4.1.18.3.4.28.3.1.3 | ColumnwfWepVcCircuitId | read-only | mandatory | Indicates the circuit ID of this VC entry. This is part of the instance ID. |
| 1.3.6.1.4.1.18.3.4.28.3.1.4 | ColumnwfWepVcId | read-only | mandatory | Indicates the ID of this VC entry. This is part of the instance ID. |
| 1.3.6.1.4.1.18.3.4.28.3.1.5 | ColumnwfWepVcConnectionState | read-only | mandatory | Indicates the VC state of the WEP logical connection. |
| 1.3.6.1.4.1.18.3.4.28.3.1.6 | ColumnwfWepVcCipherMode | read-only | mandatory | Indicates the encryption mode. This is only valid in the 'up' state. The values are: No algorithm yet 1 DES 40-bit keys 2 DES 56-bit keys 3 |
| 1.3.6.1.4.1.18.3.4.28.3.1.7 | ColumnwfWepVcTekChangeByte | read-only | mandatory | Frequency of traffic encryption key change, based upon number of bytes encrypted; in operation, this is effectively rounded up to the next full packet. Note th… |
| 1.3.6.1.4.1.18.3.4.28.3.1.8 | ColumnwfWepVcTekChangeTime | read-only | mandatory | Frequency of traffic encryption key change, based upon number of bytes encrypted; in operation, this is effectively rounded up to the next full packet. Note th… |
| 1.3.6.1.4.1.18.3.4.28.3.1.9 | ColumnwfWepVcBadMACReceiveds | read-only | mandatory | Indicates the number of received packets with an invalid MAC value, following decryption. |
| 1.3.6.1.4.1.18.3.4.28.3.1.10 | ColumnwfWepVcBadCipherReceiveds | read-only | mandatory | Indicates the number of received packets that failed decryption. This class of error usually involves invalid packet formats, etc. |
| 1.3.6.1.4.1.18.3.4.28.3.1.11 | ColumnwfWepVcConnectionRetries | read-only | mandatory | Indicates the number of timeouts which cause retransmission of a connect request. This error means the router peer is not responding. |
| 1.3.6.1.4.1.18.3.4.28.3.1.12 | ColumnwfWepVcInvalidOpCodes | read-only | mandatory | Indicates the number of supposed wep packets received with bad op-codes. This class of error usually involves invalid packet formats, etc. |
| 1.3.6.1.4.1.18.3.4.28.3.1.13 | ColumnwfWepVcPacketsDroppedNotUp | read-only | mandatory | Indicates the number of data packets dropped in the not-up state. This error means the wep connection is not up yet for some reason. |
| 1.3.6.1.4.1.18.3.4.28.3.1.14 | ColumnwfWepVcPacketsDroppedBadN | read-only | mandatory | Indicates the number of packets dropped for N-value mismatch. This error means the router peers are not N-time-synchronized. |
| 1.3.6.1.4.1.18.3.4.28.3.1.15 | ColumnwfWepVcPacketsDroppedAuthenticator | read-only | mandatory | Indicates the number of control packets dropped for bad authenticators. This class of error usually involves invalid packet formats, etc. |
| 1.3.6.1.4.1.18.3.4.28.3.1.16 | ColumnwfWepVcBadAlgorithmValueReceiveds | read-only | mandatory | Indicates the number of control packets dropped for a bad encryption algorithm value received. This class of error usually involves invalid packet formats, etc. |
| 1.3.6.1.4.1.18.3.4.28.3.1.17 | ColumnwfWepVcAlgorithmNoGCDs | read-only | mandatory | Indicates the number of control packets dropped when there is no encryption algorithm commonality between the 2 sides. This would usually be due to not choosin… |
| 1.3.6.1.4.1.18.3.4.28.3.1.18 | ColumnwfWepVcAlgorithmMismatches | read-only | mandatory | Indicates the number of control packets dropped because a matching algorithm was arbitrated in one direction and then a different algorithm was requested in th… |
| 1.3.6.1.4.1.18.3.4.28.3.1.19 | ColumnwfWepVcUnexpectedState | read-only | mandatory | Indicates internal errors for an unexpected state. |
| 1.3.6.1.4.1.18.3.4.28.3.1.20 | ColumnwfWepVcPacketsDroppedBadMinorSeq | read-only | mandatory | Indicates the number of data packets dropped for minor sequence number mismatch. This error may indicate a replay attack. |
| 1.3.6.1.4.1.18.3.4.28.3.1.21 | ColumnwfWepVcEncryptedBytes | read-only | mandatory | Indicates the number of bytes encrypted. |
| 1.3.6.1.4.1.18.3.4.28.3.1.22 | ColumnwfWepVcDecryptedBytes | read-only | mandatory | Indicates the number of bytes decrypted. |
| 1.3.6.1.4.1.18.3.4.28.4 | TablewfFrVCircuitLETable | not-accessible | mandatory | Frame Relay Circuit link encryption table gives attributs for the link encryption for virtual circuits. |
| 1.3.6.1.4.1.18.3.4.28.4.1 | RowwfFrVCircuitLEEntry | not-accessible | mandatory | An entry in the Frame Relay Circuit table. An instance exists only if a corresponding wfFrVCircuitEntry exists (e.g. for that same VC). |
| 1.3.6.1.4.1.18.3.4.28.4.1.1 | ColumnwfFrCircuitLEDelete | read-write | mandatory | Create/delete parameter |
| 1.3.6.1.4.1.18.3.4.28.4.1.2 | ColumnwfFrCircuitLEDisable | read-only | mandatory | Enable/disable link encryption on this VC |
| 1.3.6.1.4.1.18.3.4.28.4.1.3 | ColumnwfFrCircuitLELineNumber | read-only | mandatory | Instance identifier. This is the line number on which the associated Frame Relay interface resides. |
| 1.3.6.1.4.1.18.3.4.28.4.1.4 | ColumnwfFrCircuitLELLIndex | read-only | mandatory | The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame R… |
| 1.3.6.1.4.1.18.3.4.28.4.1.5 | ColumnwfFrCircuitLECircuitNumber | read-only | mandatory | The circuit number of this interface. |
| 1.3.6.1.4.1.18.3.4.28.4.1.6 | ColumnwfFrCircuitLEDlci | read-only | mandatory | One of three instance identifier. This is the Frame Relay 'address' of the virtual circuit. |
| 1.3.6.1.4.1.18.3.4.28.4.1.7 | ColumnwfFrCircuitLEState | read-only | mandatory | Indicates the state of the particular virtual circuit. |
| 1.3.6.1.4.1.18.3.4.28.4.1.8 | ColumnwfFrCircuitLELtsSecret | read-only | mandatory | Long-term shared secret, used to generate a series of key encryption keys for use during the connection. This value contained in the MIB is itself encrypted un… |
| 1.3.6.1.4.1.18.3.4.28.4.1.9 | ColumnwfFrCircuitLEMekChangeRate | read-only | mandatory | The rate of change of the n counter in minutes, used in generating the current master encryption key Kijn. |
| 1.3.6.1.4.1.18.3.4.28.5 | TablewfPppCircuitLETable | not-accessible | mandatory | The Wellfleet PPP Circuit Link Encryption Configuration Table contains attributes for the link encryption mechanism. |
| 1.3.6.1.4.1.18.3.4.28.5.1 | RowwfPppCircuitLEEntry | not-accessible | mandatory | Per Wellfleet circuit PPP link encryption configuration parameters and counters. An instance exists only if a corresponding wfPPPCircuitEntry exists (e.g. for … |
| 1.3.6.1.4.1.18.3.4.28.5.1.1 | ColumnwfPppCircuitLEDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.28.5.1.2 | ColumnwfPppCircuitLEDisable | read-only | mandatory | Enable/disable link encryption on this circuit. |
| 1.3.6.1.4.1.18.3.4.28.5.1.3 | ColumnwfPppCircuitLEState | read-only | mandatory | PPP link encryption state variable, Not Present, Init, Down, Up |
| 1.3.6.1.4.1.18.3.4.28.5.1.4 | ColumnwfPppCircuitLECircuitID | read-only | mandatory | cct number for this instance |
| 1.3.6.1.4.1.18.3.4.28.5.1.5 | ColumnwfPppCircuitLELtsSecret | read-only | mandatory | Long-term shared secret, used to generate a series of key encryption keys for use during the connection. This value contained in the MIB is itself encrypted un… |
| 1.3.6.1.4.1.18.3.4.28.5.1.6 | ColumnwfPppCircuitLEMekChangeRate | read-only | mandatory | The rate of change of the n counter in minutes, used in generating the current master encryption key Kijn. |