Wellfleet-X25-MIB
240 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.4.1 | NodewfX25 | |||
| 1.3.6.1.4.1.18.3.5.9.4.1.1 | ScalarwfX25Delete | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.5.9.4.1.2 | ScalarwfX25Disable | read-write | mandatory | Enable/Disable parameter. Default is enabled. |
| 1.3.6.1.4.1.18.3.5.9.4.1.3 | ScalarwfX25State | read-only | mandatory | The current state of the entire X.25. |
| 1.3.6.1.4.1.18.3.5.9.4.2 | TablewfX25ServiceTable | not-accessible | mandatory | This table describes the services of a circuit on an X.25 line. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1 | RowwfX25ServiceEntry | not-accessible | mandatory | An entry in the X25 Service table. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.1 | ColumnwfX25ServiceDelete | read-write | mandatory | Create/Delete parameter, default = created. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.2 | ColumnwfX25ServiceDisable | read-write | mandatory | Enable/Disable parameter, default = enabled. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.3 | ColumnwfX25ServiceSlot | read-only | mandatory | Slot number and part of Instance Id. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.4 | ColumnwfX25ServiceConnector | read-only | mandatory | Connector number and instance ID member. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.5 | ColumnwfX25ServiceLineNumber | read-only | mandatory | Instance identifier member. This is the line number assigned to the driver X.25 is running over. No used in 7.60. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.6 | ColumnwfX25ServiceLLIndex | read-only | mandatory | Instance identifier member. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stack. If the lower layer is a dri… |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.7 | ColumnwfX25ServiceCct | read-only | mandatory | Circuit number and instance ID member. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.8 | ColumnwfX25ServiceIndex | read-only | mandatory | X.25 service entry record ID for this instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.9 | ColumnwfX25ServiceType | read-write | mandatory | Type of Service. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.10 | ColumnwfX25ServiceConnRef | read-only | mandatory | Use of Connection Reference Numbers in Call Request For PDN only, if ON then use wfX25ServiceConnId as starting reference number for PDN. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.11 | ColumnwfX25ServiceConnId | read-write | mandatory | Connection Id to be used in a PTOP Call request. For PDN this will be the starting number to be used as Connection Id in PDN. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.12 | ColumnwfX25ServiceRemoteX121Addr | read-write | mandatory | Remote X.121 address for this table entry instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.13 | ColumnwfX25ServiceRemoteIpAddr | read-write | mandatory | Remote IP address for PDN and DDN only. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.14 | ColumnwfX25ServiceBCast | read-write | mandatory | Broadcast recipient status for this table entry instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.15 | ColumnwfX25ServiceMaxConn | read-write | mandatory | Maximum connections per destination for this table entry instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.16 | ColumnwfX25ServicePrecedence | read-write | mandatory | Precedence value for this table entry instance. DDN only. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.17 | ColumnwfX25ServiceMaxIdle | read-write | mandatory | Maximum Idle Time in Minutes for this table entry instance. If 0 is entered the connection stays on forever. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.18 | ColumnwfX25ServiceCallRetry | read-write | mandatory | Interval in seconds between Call Request to same the destination. Must be at least 2 times T11/T21 Timer for Packet Level. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.19 | ColumnwfX25ServiceFlowFacility | read-write | mandatory | Flow Control negotiation facility parameter for this instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.20 | ColumnwfX25ServiceWinSize | read-write | mandatory | Packet window size parameter for this table entry instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.21 | ColumnwfX25ServicePktSize | read-write | mandatory | Packet size parameter for this table entry instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.22 | ColumnwfX25ServiceFastSelRequest | read-write | mandatory | Fast Select Request Facility for this table entry instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.23 | ColumnwfX25ServiceFastSelAccept | read-write | mandatory | Fast Select Accept Facility for this table entry instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.24 | ColumnwfX25ServiceRevChRequest | read-write | mandatory | Reverse Charge Request Facility for this table entry instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.25 | ColumnwfX25ServiceRevChAccept | read-write | mandatory | Reverse charge Accept Facility for this table entry instance. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.26 | ColumnwfX25ServiceCugFormat | read-write | mandatory | Closed User Group Facility Format. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.27 | ColumnwfX25ServiceCugType | read-write | mandatory | Closed User Group Facility Type: Normal CUG, Bilateral CUG, or Outgoing Access CUG. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.28 | ColumnwfX25ServiceCugNum | read-write | mandatory | Closed User Group (CUG) number. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.29 | ColumnwfX25ServiceUserFacility | read-write | mandatory | Additional User Supplied Facilities. Must be in Hexadecimal form. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.30 | ColumnwfX25ServiceValid | read-only | mandatory | Validity of the record - updated by X.25. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.31 | ColumnwfX25ServiceBFE | read-write | mandatory | Enabled if DDNX.25/BFE enabled. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.32 | ColumnwfX25ServiceForceCugZero | read-write | mandatory | Force Closed User Group of Zero. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.33 | ColumnwfX25ServiceWcpEnable | read-write | mandatory | Enable compression |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.34 | ColumnwfX25ServiceMUX | read-write | mandatory | Set to Enabled to perform 1356 Multiplexing of protocols in the same Vc |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.35 | ColumnwfX25ServicePtopCallRequest | read-write | mandatory | Select which side of PTOP circuit initiates the connection. (default = highest X.121 address initiates the call) |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.36 | ColumnwfX25ServiceVcType | read-write | mandatory | Determines whether this service record represents a Switch Virtual Circuit (SVC) or Permanent Virtual Circuit (PVC). (default = svc) |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.37 | ColumnwfX25ServicePvcLcn | read-write | mandatory | PVC Logical Channel Number for this service record |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.38 | ColumnwfX25ServiceMacPoolStart | read-write | mandatory | Starting address of MAC address pool |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.39 | ColumnwfX25ServiceMacPoolSize | read-write | mandatory | The size of MAC address pool |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.40 | ColumnwfX25ServiceWindowTimeout | read-write | mandatory | Window Timeout to detect a dysfunctional VC. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.41 | ColumnwfX25ServiceVcBurstThroughput | read-write | mandatory | Maximum number of bits of data allowed to be transmitted for this service record in one second. This value is divided equally amongst the VCs active for this s… |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.42 | ColumnwfX25ServiceVcBurstQDepth | read-write | mandatory | Maximum number of buffers that can be held in the Burst Queue while the VC gate pends. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.43 | ColumnwfX25ServiceVcPriority | read-write | mandatory | Priority of the VCs associated with this service record. This value is used to specify whether packets being transmitted for this VC will be given preference o… |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.44 | ColumnwfX25ServiceVcBurstQClippedPkts | read-only | mandatory | Total Number of packets dropped for VCs of this service record due to lack of buffers in their respective Burst Queues. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.45 | ColumnwfX25ServiceVcBurstQPktCnt | read-only | mandatory | Total Number of packets stored in the Burst Queues of VCs of this service record between successive attempts to forward to the PLP layer. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.46 | ColumnwfX25ServiceVcBurstQHighWaterPkts | read-only | mandatory | The Highest Water Packet Mark of the Burst Queues of VCs of this service record. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.47 | ColumnwfX25ServiceVcPktDrops | read-only | mandatory | Total Number of Packets Dropped for VCs of this service record at the VC level. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.48 | ColumnwfX25ServicePlpPktDrops | read-only | mandatory | Total Number of Packets Dropped by PLP for VCs of this service record. |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.49 | ColumnwfX25ServiceBurstThrPerVc | read-only | mandatory | Burst Throughput per VC, dynamically computed as Burst Throughput confiogured for the service record divided by number of VCs for the service record in Data Tr… |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.50 | ColumnwfX25ServiceBackupRecoveryDelay | read-write | mandatory | Delay in reverting back to a restored PDN service |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.51 | ColumnwfX25ServiceSetupTime | read-write | mandatory | Total time allowed for setting up a PDN SVC before attempting a backup |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.52 | ColumnwfX25ServiceRetryNumber | read-write | mandatory | The number of times a PDN SVC setup will be attempted if no response is received from the peer |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.53 | ColumnwfX25BackupInitiation | read-write | mandatory | Determines whether to initiate PDN backup on failure of any SVC or the last one |
| 1.3.6.1.4.1.18.3.5.9.4.2.1.54 | ColumnwfX25ServiceEntryName | read-write | mandatory | name of the sevice entry |
| 1.3.6.1.4.1.18.3.5.9.4.4 | TablewfX25VcTable | not-accessible | mandatory | This is a table of Statistic Entries is per Virtual Circuit. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1 | RowwfX25VcEntry | not-accessible | mandatory | An entry in the X.25 VC table. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.1 | ColumnwfX25VcSlotNum | read-only | mandatory | Instance ID and Slot number this VC is on. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.2 | ColumnwfX25VcConnector | read-only | mandatory | Instance ID and Connector number this VC is using |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.3 | ColumnwfX25VcLineNumber | read-only | mandatory | Instance identifier member. This is the line number assigned to the driver X25 is running on top of and this VC is running on. No used in 7.60 |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.4 | ColumnwfX25VcLLIndex | read-only | mandatory | Instance identifier member. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stack. If the lower layer is a dri… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.5 | ColumnwfX25VcCct | read-only | mandatory | Instance ID and CCT supporting these VCs. User determines this CCT via log. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.6 | ColumnwfX25VcNumber | read-only | mandatory | Instance ID and VC number for this VC. This number corresponds to the LCN. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.7 | ColumnwfX25VcDataTxs | read-only | mandatory | Number of Data Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.8 | ColumnwfX25VcInterruptTxs | read-only | mandatory | Number of Interrupt Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.9 | ColumnwfX25VcResetTxs | read-only | mandatory | Number of Reset Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.10 | ColumnwfX25VcRrTxs | read-only | mandatory | Number of Receiver Ready Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.11 | ColumnwfX25VcRnrTxs | read-only | mandatory | Number of Receiver Not Ready Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.12 | ColumnwfX25VcRejectTxs | read-only | mandatory | Number of Reject Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.13 | ColumnwfX25VcSegmentTxs | read-only | mandatory | Number of Charge Units sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.14 | ColumnwfX25VcBytesTxs | read-only | mandatory | Number of Data Bytes sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.15 | ColumnwfX25VcIntBytesTxs | read-only | mandatory | Number of Interrupt Data Bytes sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.16 | ColumnwfX25VcDataRxs | read-only | mandatory | Number of Data Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.17 | ColumnwfX25VcInterruptRxs | read-only | mandatory | Number of Interrupt Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.18 | ColumnwfX25VcResetRxs | read-only | mandatory | Number of Reset Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.19 | ColumnwfX25VcRrRxs | read-only | mandatory | Number of Receiver Ready Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.20 | ColumnwfX25VcRnrRxs | read-only | mandatory | Number of Receiver Not Ready Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.21 | ColumnwfX25VcRejectRxs | read-only | mandatory | Number of Reject Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.22 | ColumnwfX25VcSegmentRxs | read-only | mandatory | Number of Charge Units received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.23 | ColumnwfX25VcBytesRxs | read-only | mandatory | Number of Data Bytes received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.24 | ColumnwfX25VcIntBytesRxs | read-only | mandatory | Number of Interrupt Data Bytes received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.25 | ColumnwfX25VcApPktsDropped | read-only | mandatory | Number of Application/redirector Packets Droped |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.26 | ColumnwfX25VcRemoteX121Addr | read-only | mandatory | Remote DTE Address for this connection |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.27 | ColumnwfX25VcBurstQClippedPkts | read-only | mandatory | Number of packets dropped for this VC due to lack of buffers in the Burst Queue. Packets are only dropped when the value of the statistic wfX25VcBurstQPktCnt i… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.28 | ColumnwfX25VcBurstQPktCnt | read-only | mandatory | Number of packets stored for this VC in the Burst Queue between successive attempts to forward to the PLP layer. This statistic is indicative of the transient … |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.29 | ColumnwfX25VcBurstQHighWaterPkts | read-only | mandatory | High Water Packet Mark for the Burst Queue of this VC. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.30 | ColumnwfX25VcPktsLargerThanBurstThrCnt | read-only | mandatory | Total Number of Packets serviced on this VC which are larger than the computed burst throughput per VC. The burst throughput per VC is computed as wfX25Service… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.31 | ColumnwfX25VcPktDrops | read-only | mandatory | Total Number of Packets Dropped on this VC. These drops are caused by insufficient resources being available to forward the packets to the PLP layer. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.32 | ColumnwfX25VcPlpPktDrops | read-only | mandatory | Total Number of Packets Dropped by PLP on this VC. These drops are due to either the line being disabled or the lack of buffering to store packets for transmis… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.33 | ColumnwfX25VcMbsOutstanding | read-only | mandatory | Number of packets sent to the PLP layer from the upper layer that have not yet been added to the local assembly/deassembly queue at the PLP layer. These packet… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.34 | ColumnwfX25VcMbsOutstandingPostTx | read-only | mandatory | Number of buffers sent to the PLP layer that have not yet been added to the local asembly/deassembly queue. This value is set after the PLP layer has completed… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.35 | ColumnwfX25VcMaxTx | read-only | mandatory | Maximum Number of buffers that can be sent from the upper layer to the PLP layer at any one time without overflowing the local assembly/desasembly queue. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.36 | ColumnwfX25VcMbsQueueCnt | read-only | mandatory | Number of buffers sent to the PLP layer that are currently on the local assembly/deassembly queue at the PLP layer. This value is set after the PLP layer has c… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.37 | ColumnwfX25VcMbsQueueCntPostTx | read-only | mandatory | Number of buffers sent to the PLP layer that have not yet been added to the local assembly/deassembly queue. This value is set after the PLP layer has complete… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.38 | ColumnwfX25VcTxQueueCnt | read-only | mandatory | Number of buffers sent to the PLP layer that are currently on the transmit queue at the PLP layer. This value is set after the PLP layer has completed processi… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.39 | ColumnwfX25VcTxQueueCntPostTx | read-only | mandatory | Number of buffers sent to the PLP layer that are currently on thequeue to transmit at the PLP layer. This value is set after the PLP layer has completed transm… |
| 1.3.6.1.4.1.18.3.5.9.4.5 | TablewfLapbPktTable | not-accessible | mandatory | The table of LAPB PKT Level Parameters |
| 1.3.6.1.4.1.18.3.5.9.4.5.1 | RowwfLapbPktEntry | not-accessible | mandatory | An entry in the LAPB PKT table |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.1 | ColumnwfLapbPktDelete | read-write | mandatory | Create/Delete parameter. Default is created. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.2 | ColumnwfLapbPktDisable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.3 | ColumnwfLapbPktSlotNum | read-only | mandatory | Instance identifier. This is the slot number where this X.25 packet layer is running. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.4 | ColumnwfLapbPktConnector | read-only | mandatory | Instance identifier. This is the Physical connector number for the Physical layer associated with this X25 Packet layer. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.5 | ColumnwfLapbPktLineNumber | read-only | mandatory | Instance identifier. This is the line number assigned to the LAPB Driver associated with this X25 Packet Layer. Not used in 7.60 |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.6 | ColumnwfLapbPktLLIndex | read-only | mandatory | Instance identifier. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stack. If the lower layer is a driver, th… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.7 | ColumnwfLapbPktLapbCct | read-only | mandatory | Circuit number of Lapb (SYNC) driver associated with this X25 Packet Layer |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.8 | ColumnwfLapbPktLinkId | read-only | mandatory | Access Link identifier - index into line information array. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.9 | ColumnwfLapbPktLineState | read-only | mandatory | Reflects the state of the X.25 packet layer that is associated with this network record. When the state of this parameter is set to Up, the router can transfer… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.10 | ColumnwfLapbPktSeqSize | read-write | mandatory | Sequence numbering scheme for the data packets. Modulo 8 or Modulo 128 |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.11 | ColumnwfLapbPktMaxWindow | read-write | mandatory | Maximum window size that can be negotiated on a per call basis, if the flow control facility is subscribed too. Extended window size of 127 can be used if wfLa… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.12 | ColumnwfLapbPktMaxLength | read-write | mandatory | Maximum packet length that can be negotiated on a per call basis, if the flow control facility is subscribed too. This attribute is effective only if the attri… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.13 | ColumnwfLapbPktMaxThroughput | read-write | mandatory | Maximum throughput class value that can be negotiated on a per call basis, if the throughput class negotiation facility is subscribed too. For this to be effec… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.14 | ColumnwfLapbPktFlowCtl | read-write | mandatory | Flow control parameter negotiation facility subscription |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.15 | ColumnwfLapbPktThroughput | read-write | mandatory | Throughput class negotiation facility subscription |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.16 | ColumnwfLapbPktUserIdentity | read-write | mandatory | Network user identification (NUI) related facility subscription |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.17 | ColumnwfLapbPktInCalls | read-write | mandatory | Specifies whether or not (ON/OFF) incoming calls are permitted |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.18 | ColumnwfLapbPktOutCalls | read-write | mandatory | Specifies whether or not (ON/OFF) outgoing calls are permitted |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.19 | ColumnwfLapbPktFastAccept | read-write | mandatory | Specifies whether or not (ON/OFF) fast select acceptance facility is subscribed too. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.20 | ColumnwfLapbPktReverseAccept | read-write | mandatory | Specifies whether or not (ON/OFF) reverse charge aceptance facility is subscribed to. If this is set this packet layer will simply accept calls with reverse ch… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.21 | ColumnwfLapbPktFastSelect | read-write | mandatory | Specifies whether or not (ON/OFF) fast select facility is allowed on a per call basis. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.22 | ColumnwfLapbPktReverseCharging | read-write | mandatory | Specifies whether or not (ON/OFF) reverse charging facility is allowed on a per call basis. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.23 | ColumnwfLapbPktCugSelection | read-write | mandatory | Format of the Closed User Group (CUG) related facilities supported. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.24 | ColumnwfLapbPktCugOA | read-write | mandatory | Specifies whether or not CUG with Outgoing access selection facility is supported. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.25 | ColumnwfLapbPktCugBilateral | read-write | mandatory | Specifies whether or not Bilateral Closed User Group related facility is supported. If this is set, then the wfLapbPktCugSelection should be set to EXTENDED. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.26 | ColumnwfLapbPktRpoaSelection | read-write | mandatory | Specifies whether or not RPOA related facility is supported. Outgoing calls will not contain any RPOA facility. But if set this packet layer will simply accept… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.27 | ColumnwfLapbPktChargeInform | read-write | mandatory | Specifies whether or not the charging information related facilities are supported. Outgoing calls will not contain the charge information related facility. Bu… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.28 | ColumnwfLapbPktTransitDelay | read-write | mandatory | Transit delay indication facility. If set, accept calls with this facility. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.29 | ColumnwfLapbPktFullAddressing | read-write | mandatory | If this attribute is set, the full local X121 address (calling address) is supplied in the outgoing call request and the X.25 network also expected to provide … |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.30 | ColumnwfLapbPktAccFormat | read-write | mandatory | Specifies the format of the call accepted packet. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.31 | ColumnwfLapbPktRelFormat | read-write | mandatory | Connection release format - format of Clear Requests |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.32 | ColumnwfLapbPktT1 | read-write | mandatory | Local confirmation timeouts in seconds. This timer represents the following CCITT timers. If DCE: T10 (restart), T12 (reset), T13 (clear) If DTE: T20 (restart)… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.33 | ColumnwfLapbPktT2 | read-write | mandatory | Call confirmation time out in seconds. This represent the CCITT T11 timer for the DCE and T21 timer for the DTE. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.34 | ColumnwfLapbPktT3 | read-write | mandatory | Congestion or busy condition watchdog timer in milliseconds. When system resources needed for packet assembly/deassembly depleted, this timer is set to reenter… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.35 | ColumnwfLapbPktT4 | read-write | mandatory | Data packet transmission watchdog timer in milliseconds. This is the delay for acknowledgement. It is used to reenter PLP state machine also. User should use e… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.36 | ColumnwfLapbPktIwcCnt | read-write | mandatory | Number of IWC (Incoming VC's) defined on this access link. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.37 | ColumnwfLapbPktIwcId | read-write | mandatory | Low LCN ID for IWC (Incoming VC's) defined on this access link. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.38 | ColumnwfLapbPktBwcCnt | read-write | mandatory | Number of BWC (Bidirectional VC's) defined on this access link. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.39 | ColumnwfLapbPktBwcId | read-write | mandatory | Low LCN ID for BWC (Bidirectional VC's) defined on this access link. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.40 | ColumnwfLapbPktOwcCnt | read-write | mandatory | Number of OWC (Outgoing VC's) defined on this access link. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.41 | ColumnwfLapbPktOwcId | read-write | mandatory | Low LCN ID for OWC (Outgoing VC's) defined on this access link. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.42 | ColumnwfLapbPktDefWindow | read-write | mandatory | Non standard default transmit/receive window size. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.43 | ColumnwfLapbPktDefLength | read-write | mandatory | Non standard default transmit/receive packet size. This attribute should not be greater than the wfSyncEntry attribute wfSyncMtu. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.44 | ColumnwfLapbPktDefClass | read-write | mandatory | Non standard default transmit/receive throughput class assignment. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.45 | ColumnwfLapbPktDxe | read-write | mandatory | Specify type of local X25 interface and imply subsequent rules of X.25. DXE_X25DTERSTA ->DTE mode with Restart Procedure. DXE_X25DTE ->DTE mode without any res… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.46 | ColumnwfLapbPktConformance | read-write | mandatory | CCITT conformance recommendation used on each line. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.47 | ColumnwfLapbPktStandard | read-write | mandatory | Network Standard to be used on each line. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.48 | ColumnwfLapbPktNetaddr | read-only | mandatory | This Link's Network address (X121 address). |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.49 | ColumnwfLapbPktStatistics | read-write | mandatory | Gives the user the ability to Turn ON or Shut OFF statistics computation. This can be shut off for better performance on the line. Now it also provides a small… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.50 | ColumnwfLapbPktNetaddrType | read-write | mandatory | This defines whether the Network connection is to a DDN network or PDN Network. This is used to decide how the Local X121 Network address is derived. If this a… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.51 | ColumnwfLapbPktDDNIpAddr | read-write | mandatory | If the wfLapbPktNetaddrType is DDNTYPE or DDN_BFE this is the user supplied local IP address. The router will convert this to the corresponding X121 address an… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.52 | ColumnwfLapbPktPDNX121Addr | read-write | mandatory | If the wfLapbPktNetaddrType is PDNTYPE this is the user supplied local X.121 address. The router will put this value in wfLapbPktNetaddr attribute. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.53 | ColumnwfLapbPktTxT5 | read-write | mandatory | Tx window size transmit delay timer |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.54 | ColumnwfLapbPktUseDfltService | read-write | mandatory | Indicates whether or not to use the default ddn service. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.55 | ColumnwfLapbPktPVCCnt | read-write | mandatory | Number of PVCs defined on this access link. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.56 | ColumnwfLapbPktPVCLowLcn | read-write | mandatory | Low LCN ID for PVCs defined on this access link. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.57 | ColumnwfLapbPktClientTimer | read-write | mandatory | Client application response timeout period in seconds. This timer allows for the extended delays that can occur negotiating with remote clients (e.g., IPEX or … |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.58 | ColumnwfLapbPktPduSize | read-write | mandatory | The X.25 PDU Size for this logical channel. This PDU size represents the M_BUF_SIZE used for X.25 Fragmentation and Reassembly in the packet layer. This is the… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.59 | ColumnwfLapbPktTranspacCauseCodeEnable | read-write | mandatory | Use Transpac Cause Codes , default = disabled. |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.60 | ColumnwfLapbPktTxMbsQueueThreshold | read-write | mandatory | The maximum number of packets that TX mbs queue can hold. If X.25 receives more packets and TX mbs queue count reaches this maximum, it will open up another SV… |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.61 | ColumnwfLapbPktBackupDebugLvl | read-write | mandatory | Debug level for X.25 backup messages |
| 1.3.6.1.4.1.18.3.5.9.4.5.1.62 | ColumnwfLapbPktBackupEnable | read-write | mandatory | Backup Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.5.9.4.6 | TablewfLapbPktStatsTable | not-accessible | mandatory | The table of LAPB PKT Level Statistics. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1 | RowwfLapbPktStatsEntry | not-accessible | mandatory | Packet level statistics. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.1 | ColumnwfLapbPktStatsSlotNum | read-only | mandatory | Slot number and instance ID for this Lapb Packet Layer Line instance. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.2 | ColumnwfLapbPktStatsConnector | read-only | mandatory | Port number and instance ID for this Lapb Packet Layer Line instance. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.3 | ColumnwfLapbPktStatsLineNumber | read-only | mandatory | Instance identifier member. This is the line number assigned to the driver X.25 is running over. No used in 7.60 |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.4 | ColumnwfLapbPktStatsLLIndex | read-only | mandatory | Instance identifier member. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stack. If the lower layer is a dri… |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.5 | ColumnwfLapbPktStatsCct | read-only | mandatory | Circuit number for this instance. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.6 | ColumnwfLapbPktStatsLineAddress | read-only | mandatory | The local X.121 address of this line. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.7 | ColumnwfLapbPktStatsMaxVcs | read-only | mandatory | Maximum number of Virtual Circuits allowed on this line. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.8 | ColumnwfLapbPktStatsActiveVcs | read-only | mandatory | Number of Active Virtual Circuits on this line. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.9 | ColumnwfLapbPktStatsActiveMax | read-only | mandatory | Highest number of active Virtual Circuits on this line. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.10 | ColumnwfLapbPktStatsTotalConnections | read-only | mandatory | Number of Total Virtual Connections performed since start up. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.11 | ColumnwfLapbPktStatsFailedConnections | read-only | mandatory | Number of unsuccessful Virtual Connections performed since start up. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.12 | ColumnwfLapbPktStatsNormalDisconnects | read-only | mandatory | Number of Normal Virtual Circuit Disconnections. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.13 | ColumnwfLapbPktStatsAbnormalDisconnects | read-only | mandatory | Number of Abnormal Virtual Circuit Disconnections. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.14 | ColumnwfLapbPktStatsDataTxs | read-only | mandatory | Number of Data Packets Transmitted on this line. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.15 | ColumnwfLapbPktStatsInterruptTxs | read-only | mandatory | Number of Interrupt Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.16 | ColumnwfLapbPktStatsResetTxs | read-only | mandatory | Number of Reset Requests sent. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.17 | ColumnwfLapbPktStatsRrTxs | read-only | mandatory | Number of Receiver Ready Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.18 | ColumnwfLapbPktStatsRnrTxs | read-only | mandatory | Number of Receiver Not Ready Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.19 | ColumnwfLapbPktStatsRejectTxs | read-only | mandatory | Number of Reject Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.20 | ColumnwfLapbPktStatsRestartTxs | read-only | mandatory | Number of Restart Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.21 | ColumnwfLapbPktStatsDiagTxs | read-only | mandatory | Number of Diagnostic Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.22 | ColumnwfLapbPktStatsSegmentTxs | read-only | mandatory | Number of Charge Units sent. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.23 | ColumnwfLapbPktStatsBytesTxs | read-only | mandatory | Number of Data Bytes sent. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.24 | ColumnwfLapbPktStatsIntBytesTxs | read-only | mandatory | Number of Interrupt Data Bytes sent. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.25 | ColumnwfLapbPktStatsDataRxs | read-only | mandatory | Number of Data Packets received on this line. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.26 | ColumnwfLapbPktStatsInterruptRxs | read-only | mandatory | Number of Interrupt Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.27 | ColumnwfLapbPktStatsResetRxs | read-only | mandatory | Number of Reset Requests received. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.28 | ColumnwfLapbPktStatsRrRxs | read-only | mandatory | Number of Receiver Ready Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.29 | ColumnwfLapbPktStatsRnrRxs | read-only | mandatory | Number of Receiver Not Ready Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.30 | ColumnwfLapbPktStatsRejectRxs | read-only | mandatory | Number of Reject Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.31 | ColumnwfLapbPktStatsRestartRxs | read-only | mandatory | Number of Restart Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.32 | ColumnwfLapbPktStatsDiagRxs | read-only | mandatory | Number of Diagnostic Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.33 | ColumnwfLapbPktStatsSegmentRxs | read-only | mandatory | Number of Charge Units received. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.34 | ColumnwfLapbPktStatsBytesRxs | read-only | mandatory | Number of Data Bytes received. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.35 | ColumnwfLapbPktStatsIntBytesRxs | read-only | mandatory | Number of Interrupt Data Bytes received. |
| 1.3.6.1.4.1.18.3.5.9.4.6.1.36 | ColumnwfLapbPktStatsOnOffSwitch | read-only | mandatory | This tells the user if Statistics Computation is turned ON or OFF. |
| 1.3.6.1.4.1.18.3.5.9.4.7 | TablewfX25PvcServiceTable | not-accessible | mandatory | the table of Lapb Pvc Packet level parameters |
| 1.3.6.1.4.1.18.3.5.9.4.7.1 | RowwfX25PvcServiceEntry | not-accessible | mandatory | An entry in the LAPB PKT table |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.1 | ColumnwfX25PvcDelete | read-write | mandatory | Create/Delete parameter, Default is created |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.2 | ColumnwfX25PvcDisable | read-write | mandatory | Enable/Disable Parameter |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.3 | ColumnwfX25SlotNum | read-only | mandatory | Part of the Instance Identifier. This is the slot number where this X25 packet layer is running |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.4 | ColumnwfX25Connector | read-only | mandatory | Part of the Instance Identifier. This is the physical connector number for the physical layer associated with this packet layer |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.5 | ColumnwfX25LineNumber | read-only | mandatory | Part of the Instance Id. This is the line number assigned to the LAPB driver associated with the X25 Packet layer. |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.6 | ColumnwfX25LLIndex | read-only | mandatory | Instance identifier. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stack. If the lower layer is a driver, th… |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.7 | ColumnwfX25PvcServiceCct | read-only | mandatory | Instance Id. This is the Circuit number |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.8 | ColumnwfX25PvcServiceIndex | read-only | mandatory | Instace Id. This is the lcn on which this pvc is running |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.9 | ColumnwfX25PvcServiceType | read-write | mandatory | Type of Service for this PVC Service record |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.10 | ColumnwfX25PvcRxDefWindow | read-write | mandatory | This is the receive window size used for setting up the pvc. |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.11 | ColumnwfX25PvcTxDefWindow | read-write | mandatory | This is the transmit window size used for setting up the pvc. |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.12 | ColumnwfX25PvcRxDefLength | read-write | mandatory | This is the receive packet size. |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.13 | ColumnwfX25PvcTxDefLength | read-write | mandatory | This is the trasmit packet size |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.14 | ColumnwfX25PvcRxDefClass | read-write | mandatory | This is the receive througput class value that can be used on a per pvc basis. For this to be effective, the wfX25Throughput must be set ON |
| 1.3.6.1.4.1.18.3.5.9.4.7.1.15 | ColumnwfX25PvcTxDefClass | read-write | mandatory | This is the transmit througput class value that can be used on a per pvc basis. For this to be effective, the wfX25Throughput must be set ON |
| 1.3.6.1.4.1.18.3.5.9.4.8 | TablewfX25QllcAddrMapTable | not-accessible | mandatory | table of X.121 address to LLC Mac address mappings. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1 | RowwfX25QllcAddrMapEntry | not-accessible | mandatory | An entry in the QLLC Address Mapping table |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.1 | ColumnwfX25QllcAddrMapDelete | read-write | mandatory | Create/Delete parameter. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.2 | ColumnwfX25QllcAddrMapDisable | read-write | mandatory | Enable/Disable parameter. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.3 | ColumnwfX25QllcAddrMapState | read-only | mandatory | The current state of the QLLC Mapping. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.4 | ColumnwfX25QllcAddrMapCct | read-only | mandatory | Circuit number and instance ID member. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.5 | ColumnwfX25QllcAddrMapIndex | read-only | mandatory | X.25 QLLC Address Map entry record ID for this instance. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.6 | ColumnwfX25QllcAddrMapPartnerX121 | read-write | mandatory | The X.121 address of a X.25 device emulated by this interface. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.7 | ColumnwfX25QllcAddrMapAdjacentX121 | read-write | mandatory | The X.121 address of a X.25 device connecting thru this interface. This address may contain wildcard characters. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.8 | ColumnwfX25QllcAddrMapPid | read-write | mandatory | QLLC Protocol ID used in the first byte of Call User Data of the X.25 Call Request packet. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.9 | ColumnwfX25QllcAddrMapPartnerMac | read-write | mandatory | The LLC MAC address of a LLC device connecting thru this interface. The LLC MAC address may contain wildcard characters, see wfX25QllcAddrMapOptions attribute … |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.10 | ColumnwfX25QllcAddrMapPartnerSap | read-write | mandatory | The SAP of a LLC device connecting thru this interface. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.11 | ColumnwfX25QllcAddrMapAdjacentMac | read-write | mandatory | The LLC MAC address of a LLC device emulated by this interface. If set to nil, a LLC MAC address will be dynamically assign by X.25 from an address pool define… |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.12 | ColumnwfX25QllcAddrMapAdjacentSap | read-write | mandatory | The SAP of a LLC device emulated by this interface. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.13 | ColumnwfX25QllcAddrMapOptions | read-write | mandatory | This object is a bitmask, setting individual bit postions enable the option. Values may be added together to enable multiple options. Hex Dec Value Value Optio… |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.14 | ColumnwfX25QllcAddrMapTrace | read-write | mandatory | This object is a bitmask, setting individual bit postions enable logging of internal QLLC messages and events. Values may be added together to enable multiple … |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.15 | ColumnwfX25QllcAddrMapPuType | read-write | obsolete | PU type (T2.0 or T2.1) of the locally attached QLLC device. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.16 | ColumnwfX25QllcAddrMapGenXid | read-write | mandatory | Simulate receiving an XID command from the QLLC device. This object should be enabled when an PU 2.0 QLLC device is connecting thru DLSw to an non-X.25 host. |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.17 | ColumnwfX25QllcAddrMapNodeId | read-write | obsolete | The 8 hexadecimal digit Node Identification field of the simulated XID (see wfX25QllcAddrMapGenXid object). This field has two sub-fields, ID Block and ID Numb… |
| 1.3.6.1.4.1.18.3.5.9.4.8.1.18 | ColumnwfX25QllcAddrMapName | read-write | mandatory | A informational name for this QLLC Mapping. |