X25G-MIB
43 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429 | Nodeusr | |||
| 1.3.6.1.4.1.429.1 | Nodenas | |||
| 1.3.6.1.4.1.429.1.11 | Nodex25g | |||
| 1.3.6.1.4.1.429.1.11.1 | Nodex25gwId | |||
| 1.3.6.1.4.1.429.1.11.1.1 | Tablex25gwIdTable | not-accessible | mandatory | A table that contains information that identifies the hardware and software that make up the specified X.25 card. |
| 1.3.6.1.4.1.429.1.11.1.1.1 | Rowx25gwIdEntry | not-accessible | mandatory | There is one entry in this table for every X.25 card in the chassis. |
| 1.3.6.1.4.1.429.1.11.1.1.1.1 | Columnx25gwIdIndex | read-only | mandatory | An index that uniquely identifies the X.25 card for which this row in the table pertains. The value of this index matches the value of the index for the corres… |
| 1.3.6.1.4.1.429.1.11.1.1.1.2 | Columnx25gwIdHardwareSerNum | read-only | mandatory | The X.25 card's hardware serial number as stored in EEPROM. |
| 1.3.6.1.4.1.429.1.11.1.1.1.3 | Columnx25gwIdHardwareRev | read-only | mandatory | The hardware revision of the specified X.25 card as stored in its EEPROM. |
| 1.3.6.1.4.1.429.1.11.1.1.1.4 | Columnx25gwIdSoftwareRev | read-only | mandatory | The revision of the software being executed in the specified X.25 card. |
| 1.3.6.1.4.1.429.1.11.1.1.1.5 | Columnx25gwIdCpuType | read-only | mandatory | Defines the type of CPU present on the X.25 Gateway NAC. |
| 1.3.6.1.4.1.429.1.11.1.1.1.6 | Columnx25gwIdRamInstalled | read-only | mandatory | Specifies the amount of DRAM installed on the X.25 Gateway NAC in Kbytes. |
| 1.3.6.1.4.1.429.1.11.1.1.1.7 | Columnx25gwIdFlashInstalled | read-only | mandatory | Specifies the amount of Flash Rom installed on the X.25 Gateway NAC in Kbytes. |
| 1.3.6.1.4.1.429.1.11.1.1.1.8 | Columnx25gwIdOperCfgSts | read-only | mandatory | Informs the operator as to whether the operational parameters are the NVRAM parameters or if the administrative parameters have been saved to NVRAM. |
| 1.3.6.1.4.1.429.1.11.1.1.1.9 | Columnx25gwIdSelfTestResult | read-only | mandatory | Displays the results of the most resent self test performed by the X.25 Gateway NAC. If all tests have passed a value of 0 is returned. |
| 1.3.6.1.4.1.429.1.11.1.1.1.10 | Columnx25gwIdMgmtConnect | read-only | mandatory | Indicates the current status of X.25 gateway user interface. |
| 1.3.6.1.4.1.429.1.11.2 | Nodex25gwCmd | |||
| 1.3.6.1.4.1.429.1.11.2.1 | Tablex25gwCmdTable | not-accessible | mandatory | The X.25 Card Command table contains an entry for each of the manageable X.25 Cards in the chassis. It provides a means through which to take specific actions … |
| 1.3.6.1.4.1.429.1.11.2.1.1 | Rowx25gwCmdEntry | not-accessible | mandatory | There is one X.25 Card Command entry per X.25 Card in the chassis. |
| 1.3.6.1.4.1.429.1.11.2.1.1.1 | Columnx25gwCmdIndex | read-only | mandatory | A unique value for each X.25 Card in the chassis. The value of this object matches the value of the index of the corresponding X.25 Card's entry in the entity … |
| 1.3.6.1.4.1.429.1.11.2.1.1.2 | Columnx25gwCmdMgtStationId | read-write | mandatory | This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a com… |
| 1.3.6.1.4.1.429.1.11.2.1.1.3 | Columnx25gwCmdReqId | read-only | mandatory | This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this X.25 Card. If the reque… |
| 1.3.6.1.4.1.429.1.11.2.1.1.4 | Columnx25gwCmdFunction | read-write | mandatory | This object contains a value which describes the command which is being invoked. |
| 1.3.6.1.4.1.429.1.11.2.1.1.5 | Columnx25gwCmdForce | read-write | mandatory | In some cases, the X.25 Card may be in a state such that certain commands could adversely affect connections. In such cases, a command request with this object… |
| 1.3.6.1.4.1.429.1.11.2.1.1.6 | Columnx25gwCmdParam | read-write | mandatory | This object contains parameters that are specific to the particular command being issued. In some cases, there will be no aditional parameters required. |
| 1.3.6.1.4.1.429.1.11.2.1.1.7 | Columnx25gwCmdResult | read-only | mandatory | This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since the last reset. |
| 1.3.6.1.4.1.429.1.11.2.1.1.8 | Columnx25gwCmdCode | read-only | mandatory | The Value of this object is value of this object is noError(1) if the command was successful, and indicates a further description of what went wrong if it was … |
| 1.3.6.1.4.1.429.1.11.3 | Nodex25gwCfg | |||
| 1.3.6.1.4.1.429.1.11.3.1 | Tablex25gwCfgTable | not-accessible | mandatory | A table of configurable parameters specific to the X.25 Gateway NAC. |
| 1.3.6.1.4.1.429.1.11.3.1.1 | Rowx25gwCfgEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.429.1.11.3.1.1.1 | Columnx25gwCfgIndex | read-only | mandatory | A unique value for each X.25 NAC installed in the chassis. The value of this index is identical to the index in the USR chassis MIB associates with the X.25 Ga… |
| 1.3.6.1.4.1.429.1.11.3.1.1.2 | Columnx25gwCfgUiPort | read-only | mandatory | Defines how the user interface port on the X.25 NIC will be used. When configured for PAD access the UI port will provide a means of accessing the X.25 network… |
| 1.3.6.1.4.1.429.1.11.3.1.1.3 | Columnx25gwCfgLocModemConn | read-write | mandatory | Defines whether the gateway UI access will be via direct attachment or by Dial up Modem. |
| 1.3.6.1.4.1.429.1.11.3.1.1.4 | Columnx25gwCfgRoutingType | read-write | mandatory | Determines the means by which X.25 call will be routed to the NMC or modem. Default=None(1). |
| 1.3.6.1.4.1.429.1.11.3.1.1.5 | Columnx25gwCfgCudRoutStr | read-write | mandatory | Call user data string is used to compare to the incoming X.25 call request CUD. If they match then the call is routed to the NMC. Default=MGMTOVX25. |
| 1.3.6.1.4.1.429.1.11.3.1.1.6 | Columnx25gwCfgX121SubAddr | read-write | mandatory | X.121 Subaddress is used to compare to the incoming X.25 call request Subaddress. If they match then the call is routed to the NMC. Default=99. |
| 1.3.6.1.4.1.429.1.11.3.1.1.7 | Columnx25gwCfgSysDate | read-write | mandatory | X.25 gateway system date. Default = 01-01-95. |
| 1.3.6.1.4.1.429.1.11.3.1.1.8 | Columnx25gwCfgSysTime | read-write | mandatory | X.25 gateway system time. Default = 00:00:00. |
| 1.3.6.1.4.1.429.1.11.4 | Nodex25gwTrapEna | |||
| 1.3.6.1.4.1.429.1.11.4.1 | Tablex25gwTrapEnaTable | not-accessible | mandatory | Table containing objects to enable traps on the X.25 Cards in the chassis. |
| 1.3.6.1.4.1.429.1.11.4.1.1 | Rowx25gwTrapEnaEntry | not-accessible | mandatory | There is one entry for each X.25 Card in the chassis. |
| 1.3.6.1.4.1.429.1.11.4.1.1.1 | Columnx25gwTrapEnaIndex | read-only | mandatory | A unique index identifying the X.25 Card to which the trap enable objects pertain. |
| 1.3.6.1.4.1.429.1.11.4.1.1.2 | Columnx25gwTrapEnaUiReset | read-write | mandatory | Enables reporting of NAC Reset by user interface command traps. Default=disable(2). |