XDLC-OPT-MIB
308 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress mgmt NetworkAddress TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.13 | Tablecdx6500PPCTXDLCPortTable | not-accessible | mandatory | All of the configuration parameters relevant to the XDLC port table. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1 | Rowcdx6500PPCTXDLCPortEntry | not-accessible | mandatory | A row of XDLC Port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.1 | Columncdx6500xdlcpCfgPortNumber | read-only | mandatory | XDLC Port Number. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.2 | Columncdx6500xdlcpPortControl | read-only | mandatory | Specify any of the following port control options: NONE - no option specified. MB - raise Pin 22 when the port becomes disabled. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.3 | Columncdx6500xdlcpTxCoding | read-only | mandatory | This is the data encoding used on the XDLC link. nrz - Non Return to Zero. nrzi - Non Return to Zero Inverted. newvalNrz - same functionality as 'nrz', new enu… |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.4 | Columncdx6500xdlcpLineType | read-only | mandatory | Type of line, indicates whether half duplex or full duplex signals are being generated. fdx - communications occuring in both directions simultaneously between… |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.5 | Columncdx6500xdlcpTxType | read-only | mandatory | This is the transmission mode used on the line. twa - Two Way Alternate used by most controllers. tws - Two Way Simultaneous. newvalTws - same functionality as… |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.6 | Columncdx6500xdlcpClockSource | read-only | mandatory | int - Internal clock source. ext - External clock source. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.7 | Columncdx6500xdlcpClockSpeed | read-only | mandatory | This is the speed of the port in bits per second, when using internal clocking. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.8 | Columncdx6500xdlcpStationCnt | read-only | mandatory | This is the number of stations on the XDLC line. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.9 | Columncdx6500xdlcpPollTimer | read-only | mandatory | Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds … |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.10 | Columncdx6500xdlcpPollPeriod | read-only | mandatory | Time in milliseconds between polls when no data is exchanged. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.11 | Columncdx6500xdlcpTries | read-only | mandatory | Maximum number of attempts to complete a transmission. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.12 | Columncdx6500xdlcpPortOptions | read-only | mandatory | Select options on this XDLC port as follows: NONE - no option specified. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.13 | Columncdx6500xdlcpPortAddress | read-only | mandatory | When an XDLC port makes a call, this address is inserted into the calling address field. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.14 | Columncdx6500xdlcpRestartTimer | read-only | mandatory | Restart-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.15 | Columncdx6500xdlcpResetTimer | read-only | mandatory | Reset-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.16 | Columncdx6500xdlcpCallTimer | read-only | mandatory | Call-Request timeout timer in seconds. If timer expires, call is cleared. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.17 | Columncdx6500xdlcpClearTimer | read-only | mandatory | Clear-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.18 | Columncdx6500xdlcpMaxFrameSize | read-only | mandatory | Maximum size (in bytes) of a frame, excluding the frame header and CRC for SDLC frames. This parameter is Not effective on MX25 type stations. |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.19 | Columncdx6500xdlcpElectricalInterfaceType | read-only | mandatory | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.20 | Columncdx6500xdlcpV24ElectricalInterfaceOption | read-only | mandatory | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| 1.3.6.1.4.1.449.2.1.2.1.1.13.1.21 | Columncdx6500xdlcpHighSpeedElectricalInterfaceOption | read-only | mandatory | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| 1.3.6.1.4.1.449.2.1.2.1.3 | Nodecdx6500PCTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.3.5 | Nodecdx6500SPCTXDLCStationTable | |||
| 1.3.6.1.4.1.449.2.1.2.1.3.5.1 | Tablecdx6500SPCTXDLCStnTable | not-accessible | mandatory | All of the configuration parameters relevant to the XDLC station table. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.1.1 | Rowcdx6500SPCTXDLCStnEntry | not-accessible | mandatory | A row of XDLC station configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.1.1.1 | Columncdx6500xdlcsCfgPortNumber | read-only | mandatory | XDLC Port Number. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.1.1.2 | Columncdx6500xdlcsCfgStationNumber | read-only | mandatory | The number of the station on the multidrop line. Also used for routing purposes. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.1.1.3 | Columncdx6500xdlcsStationType | read-only | mandatory | Enter the type of station to configure. sdlc - SDLC Station. mx25 - MX25 Station. newvalSdlc - same functionality as 'sdlc', new enumeration added for RFC1155 … |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2 | Tablecdx6500SPCTXDLCSDLCStnTable | not-accessible | mandatory | All of the configuration parameters relevant to the XDLC SDLC station table. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1 | Rowcdx6500SPCTXDLCSDLCStnEntry | not-accessible | mandatory | A row of XDLC SDLC station configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.1 | Columncdx6500xdlcsdlcCfgPortNum | read-only | mandatory | XDLC Port Number. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.2 | Columncdx6500xdlcsdlcCfgStationNum | read-only | mandatory | The number of the station on the multidrop line. Also used for routing purposes. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.3 | Columncdx6500xdlcsdlcStationAddress | read-only | mandatory | The station address on the multidrop line. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.4 | Columncdx6500xdlcsdlcFrameWinSize | read-only | mandatory | Frame level window size must be set to the same value in devices at each end of the link. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.5 | Columncdx6500xdlcsdlcAutocallMnem | read-only | mandatory | This mnemonic references the remote address which will be called when polling activity is detected on the sdlc line. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.6 | Columncdx6500xdlcsdlcProtocolID | read-only | mandatory | The protocol identifier is the first four bytes of the call user data. If not configured the PAD will use C3000000 as the protocol ID in the call. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.7 | Columncdx6500xdlcsdlcCUG | read-only | mandatory | The station may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number, separated by a comma. (e.g. 12,34,5… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.8 | Columncdx6500xdlcsdlcOptions | read-only | mandatory | Select options on this SDLC station as follows: NONE - no option specified CUG - check closed user group in incoming calls, and insert closed user group facili… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.9 | Columncdx6500xdlcsdlcXID | read-only | mandatory | With this option selected, the TPAD's response to a QXID will contain the XID identification value defined in this parameter instead of from an exchange of ide… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.10 | Columncdx6500xdlcsdlcStnSubaddress | read-only | mandatory | The calling subaddress is appended to the port address to create the calling address in the autocall generated. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.11 | Columncdx6500xdlcsdlcBillingRecords | read-only | mandatory | This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for R… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.12 | Columncdx6500xdlcsdlcProtectionLevel | read-only | mandatory | This specifies the level of data or connection protection which will be applied to calls to or from this port. The actual level for a call will be negotiated t… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.13 | Columncdx6500xdlcsdlcReconnectTimeout | read-only | mandatory | This specifies the number of seconds that DCP on the originating side will wait between reconnection attempts. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.14 | Columncdx6500xdlcsdlcReconnectLimit | read-only | mandatory | This specifies the number of times that DCP on the originating side will attempt to reconnect before clearing the call. If 0 is entered, it will not attempt to… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.15 | Columncdx6500xdlcsdlcCallTimer | read-only | mandatory | This specifies the time before the next call is made. If 0 is entered, the time to the next call is handled internally. The time is in seconds. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.16 | Columncdx6500xdlcsdlcIdleTimer | read-only | mandatory | The Link Idle Timer is used by the SNA Dial on Demand feature for determining how long the station should wait for a data frame before bringing the X.25 call d… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.17 | Columncdx6500xdlcsdlcVerConnTimer | read-only | mandatory | The Verify Connection Timer is used by the SNA Dial on Demand feature for periodically verifying that the connection to the remote station is still active, aft… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.18 | Columncdx6500xdlcsdlcUnsusWaitTimer | read-only | mandatory | The Unsuspend Wait Timer is used by the SNA Dial on Demand feature for determining how long the station will wait in LINK-UNSUSPENDING state after receiving a … |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3 | Tablecdx6500SPCTXDLCMX25StnTable | not-accessible | mandatory | All of the configuration parameters relevant to the XDLC MX.25 station table. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1 | Rowcdx6500SPCTXDLCMX25StnEntry | not-accessible | mandatory | A row of XDLC MX.25 station configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.1 | Columncdx6500xdlcmx25CfgPortNum | read-only | mandatory | XDLC Port Number. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.2 | Columncdx6500xdlcmx25CfgStationNum | read-only | mandatory | The number of the station on the multidrop line. Also used for routing purposes. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.3 | Columncdx6500xdlcmx25StationAddress | read-only | mandatory | The station address on the multidrop line. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.4 | Columncdx6500xdlcmx25PVCChannels | read-only | mandatory | Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and cons… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.5 | Columncdx6500xdlcmx25StartingPVC | read-only | mandatory | This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.6 | Columncdx6500xdlcmx25SVCChannels | read-only | mandatory | Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consis… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.7 | Columncdx6500xdlcmx25StartingSVC | read-only | mandatory | This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.8 | Columncdx6500xdlcmx25FrameWinSize | read-only | mandatory | Frame level window size must be set to the same value in devices at each end of the link. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.9 | Columncdx6500xdlcmx25PacketWinSize | read-only | mandatory | Packet level window size must be set to the same value in devices at each end of the link. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.10 | Columncdx6500xdlcmx25Options | read-only | mandatory | Select options on this MX.25 port as follows: NONE - no option specified. HOLD - hold calls over link restart. CUG - check closed user group; otherwise, CUG pa… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.11 | Columncdx6500xdlcmx25RCDestination | read-only | mandatory | All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to rout… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.12 | Columncdx6500xdlcmx25CUG | read-only | mandatory | The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except (e.g. 12,34,56,09,02,03). 00-99… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.13 | Columncdx6500xdlcmx25BillingRecords | read-only | mandatory | This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for R… |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.14 | Columncdx6500xdlcmx25UpperQueue | read-only | mandatory | This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the attached channel. |
| 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.15 | Columncdx6500xdlcmx25LowerQueue | read-only | mandatory | This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the attached channel. |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.13 | Tablecdx6500PPSTXDLCPortTable | not-accessible | mandatory | All of the statistics parameters relevant to the XDLC Port table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1 | Rowcdx6500PPSTXDLCPortEntry | not-accessible | mandatory | A row of XDLC Port statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.1 | Columncdx6500xdlcpStatsPortNumber | read-only | mandatory | Specifies a specific port (physical port number) in the node. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.2 | Columncdx6500xdlcpPortStatus | read-only | mandatory | Specifies the current port status. disabled : The port is disabled by user. enabled : The port is enabled by user. busyOut : The port is busy outed by user. up… |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.3 | Columncdx6500xdlcpPortSpeed | read-only | mandatory | The measured port speed in bits per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.4 | Columncdx6500xdlcpUtilizationIn | read-only | mandatory | Indicates a percentage of the port recources that are currently in use from the line to the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.5 | Columncdx6500xdlcpUtilizationOut | read-only | mandatory | Indicates a percentage of the port recources that are currently in use from the port to the line. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.6 | Columncdx6500xdlcpCharInTotal | read-only | mandatory | Total number of characters processed until now, not including header characters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.7 | Columncdx6500xdlcpCharOutTotal | read-only | mandatory | Total number of characters processed until now, not including header characters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.8 | Columncdx6500xdlcpCharsInPerSec | read-only | mandatory | The average number of characters received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.9 | Columncdx6500xdlcpCharsOutPerSec | read-only | mandatory | The average number of characters transmitted per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.10 | Columncdx6500xdlcpFrameInTotal | read-only | mandatory | Total number of MX25 and SDLC frames processed until now. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.11 | Columncdx6500xdlcpFrameOutTotal | read-only | mandatory | Total number of MX25 and SDLC frames processed until now. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.12 | Columncdx6500xdlcpFramesInPerSec | read-only | mandatory | The average number of frames received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.13 | Columncdx6500xdlcpFramesOutPerSec | read-only | mandatory | The average number of frames transmitted per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.14 | Columncdx6500xdlcpCRCErrors | read-only | mandatory | Total number of CRC errors counted by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.15 | Columncdx6500xdlcpOverrunErrors | read-only | mandatory | Total number of overrun errors counted by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.16 | Columncdx6500xdlcpUnderrunErrors | read-only | mandatory | Total number of overrun errors counted by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.17 | Columncdx6500xdlcpRNRFramesIn | read-only | mandatory | Indicates the total number of RNR frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.18 | Columncdx6500xdlcpRNRFramesOut | read-only | mandatory | Indicates the total number of RNR frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.19 | Columncdx6500xdlcpRRFramesIn | read-only | mandatory | Indicates the total number of RR frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.20 | Columncdx6500xdlcpRRFramesOut | read-only | mandatory | Indicates the total number of RR frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.21 | Columncdx6500xdlcpREJFramesIn | read-only | mandatory | Indicates the total number of REJ frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.22 | Columncdx6500xdlcpREJFramesOut | read-only | mandatory | Indicates the total number of REJ frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.23 | Columncdx6500xdlcpMX25StationsUp | read-only | mandatory | Number of MX.25 stations up. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.24 | Columncdx6500xdlcpMX25StationsDown | read-only | mandatory | Number of MX.25 stations down. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.25 | Columncdx6500xdlcpMX25StationsDisabled | read-only | mandatory | Number of MX.25 stations disabled. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.26 | Columncdx6500xdlcpSDLCStationsUp | read-only | mandatory | Number of SDLC stations up. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.27 | Columncdx6500xdlcpSDLCStationsDown | read-only | mandatory | Number of SDLC stations down. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.28 | Columncdx6500xdlcpSDLCStationsDisabled | read-only | mandatory | Number of SDLC stations disabled. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.29 | Columncdx6500xdlcpStateChange | read-only | mandatory | The date and time when the link entered the current state. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.30 | Columncdx6500xdlcpLinkDowns | read-only | mandatory | Total number of times link has made a transition from the UP state to the DOWN state. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.31 | Columncdx6500xdlcpPacketsQueued | read-only | mandatory | Total number of packets queued at the XDLC protocol layer by the transmitter. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.32 | Columncdx6500xdlcpSNRMInFrames | read-only | mandatory | Total number of SNRM frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.33 | Columncdx6500xdlcpSNRMOutFrames | read-only | mandatory | Total number of SNRM frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.34 | Columncdx6500xdlcpUAInFrames | read-only | mandatory | Total number of UA frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.35 | Columncdx6500xdlcpUAOutFrames | read-only | mandatory | Total number of UA frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.36 | Columncdx6500xdlcpDMInFrames | read-only | mandatory | Total number of DM frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.37 | Columncdx6500xdlcpDMOutFrames | read-only | mandatory | Total number of DM frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.38 | Columncdx6500xdlcpXIDInFrames | read-only | mandatory | Total number of XID frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.39 | Columncdx6500xdlcpXIDOutFrames | read-only | mandatory | Total number of XID frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.40 | Columncdx6500xdlcpDISCInFrames | read-only | mandatory | Total number of DISC frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.41 | Columncdx6500xdlcpDISCOutFrames | read-only | mandatory | Total number of DISC frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.42 | Columncdx6500xdlcpRDInFrames | read-only | mandatory | Total number of RD frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.43 | Columncdx6500xdlcpRDOutFrames | read-only | mandatory | Total number of RD frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.44 | Columncdx6500xdlcpFRMRInFrames | read-only | mandatory | Total number of FRMR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.45 | Columncdx6500xdlcpFRMROutFrames | read-only | mandatory | Total number of FRMR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.46 | Columncdx6500xdlcpUPInFrames | read-only | mandatory | Total number of UP frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.47 | Columncdx6500xdlcpUPOutFrames | read-only | mandatory | Total number of UP frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.48 | Columncdx6500xdlcpTESTInFrames | read-only | mandatory | Total number of TEST frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.49 | Columncdx6500xdlcpTESTOutFrames | read-only | mandatory | Total number of TEST frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.50 | Columncdx6500xdlcpXIDNullInFrames | read-only | mandatory | Total number of XID Null frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.51 | Columncdx6500xdlcpXIDNullOutFrames | read-only | mandatory | Total number of XID Null frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.52 | Columncdx6500xdlcpXID0InFrames | read-only | mandatory | Total number of XID Type 0 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.53 | Columncdx6500xdlcpXID0OutFrames | read-only | mandatory | Total number of XID Type 0 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.54 | Columncdx6500xdlcpXID1InFrames | read-only | mandatory | Total number of XID Type 1 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.55 | Columncdx6500xdlcpXID1OutFrames | read-only | mandatory | Total number of XID Type 1 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.56 | Columncdx6500xdlcpXID3InFrames | read-only | mandatory | Total number of XID Type 3 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.13.1.57 | Columncdx6500xdlcpXID3OutFrames | read-only | mandatory | Total number of XID Type 3 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3 | Nodecdx6500PSTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.3.5 | Nodecdx6500SPSTXDLCStationTable | |||
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1 | Tablecdx6500SPSTXDLCSDLCStnTable | not-accessible | mandatory | All of the statistics parameters relevant to the XDLC SDLC Station table. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1 | Rowcdx6500SPSTXDLCSDLCStnEntry | not-accessible | mandatory | A row of XDLC SDLC Station statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.1 | Columncdx6500xdlcsdlcStatsPortNum | read-only | mandatory | Refers to the physical port number. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.2 | Columncdx6500xdlcsdlcStatsStationNum | read-only | mandatory | Station reference number. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.3 | Columncdx6500xdlcsdlcUtilizationIn | read-only | mandatory | Indicates the percentage of station resources currently in use from the line to the port. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.4 | Columncdx6500xdlcsdlcUtilizationOut | read-only | mandatory | Indicates the percentage of station resources currently in use from the port to the line. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.5 | Columncdx6500xdlcsdlcCharInTotal | read-only | mandatory | Total number of characters processed until now, not including header characters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.6 | Columncdx6500xdlcsdlcCharOutTotal | read-only | mandatory | Total number of characters processed until now, not including header characters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.7 | Columncdx6500xdlcsdlcCharsInPerSec | read-only | mandatory | The average number of characters received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.8 | Columncdx6500xdlcsdlcCharsOutPerSec | read-only | mandatory | The average number of characters transmitted per second. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.9 | Columncdx6500xdlcsdlcPacketsQueued | read-only | mandatory | The total number of packets queued at the SDLC protocol layer. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.10 | Columncdx6500xdlcsdlcFrameInTotal | read-only | mandatory | Total number of MX25 and SDLC frames processed until now. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.11 | Columncdx6500xdlcsdlcFrameOutTotal | read-only | mandatory | Total number of MX25 and SDLC frames processed until now. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.12 | Columncdx6500xdlcsdlcFramesInPerSec | read-only | mandatory | The average number of frames received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.13 | Columncdx6500xdlcsdlcFramesOutPerSec | read-only | mandatory | The average number of frames transmitted per second. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.14 | Columncdx6500xdlcsdlcRNRFramesIn | read-only | mandatory | Indicates the total number of RNR frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.15 | Columncdx6500xdlcsdlcRNRFramesOut | read-only | mandatory | Indicates the total number of RNR frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.16 | Columncdx6500xdlcsdlcRRFramesIn | read-only | mandatory | Indicates the total number of RR frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.17 | Columncdx6500xdlcsdlcRRFramesOut | read-only | mandatory | Indicates the total number of RR frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.18 | Columncdx6500xdlcsdlcREJFramesIn | read-only | mandatory | Indicates the total number of REJ frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.19 | Columncdx6500xdlcsdlcREJFramesOut | read-only | mandatory | Indicates the total number of REJ frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.20 | Columncdx6500xdlcsdlcQLLCState | read-only | mandatory | Indicates the status of the QLLC layer: INOPERATIVE : Noconnection exists with the station. CLOSED : Call connected. OPENING : Setting up session. OPENED : Rea… |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.21 | Columncdx6500xdlcsdlcQRRIn | read-only | mandatory | Total number of QRR packets received until now. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.22 | Columncdx6500xdlcsdlcQRROut | read-only | mandatory | Total number of QRR packets transmitted until now. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.23 | Columncdx6500xdlcsdlcSNRMInFrames | read-only | mandatory | Total number of SNRM frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.24 | Columncdx6500xdlcsdlcSNRMOutFrames | read-only | mandatory | Total number of SNRM frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.25 | Columncdx6500xdlcsdlcUAInFrames | read-only | mandatory | Total number of UA frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.26 | Columncdx6500xdlcsdlcUAOutFrames | read-only | mandatory | Total number of UA frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.27 | Columncdx6500xdlcsdlcDMInFrames | read-only | mandatory | Total number of DM frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.28 | Columncdx6500xdlcsdlcDMOutFrames | read-only | mandatory | Total number of DM frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.29 | Columncdx6500xdlcsdlcXIDInFrames | read-only | mandatory | Total number of XID frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.30 | Columncdx6500xdlcsdlcXIDOutFrames | read-only | mandatory | Total number of XID frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.31 | Columncdx6500xdlcsdlcDISCInFrames | read-only | mandatory | Total number of DISC frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.32 | Columncdx6500xdlcsdlcDISCOutFrames | read-only | mandatory | Total number of DISC frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.33 | Columncdx6500xdlcsdlcRDInFrames | read-only | mandatory | Total number of RD frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.34 | Columncdx6500xdlcsdlcRDOutFrames | read-only | mandatory | Total number of RD frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.35 | Columncdx6500xdlcsdlcFRMRInFrames | read-only | mandatory | Total number of FRMR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.36 | Columncdx6500xdlcsdlcFRMROutFrames | read-only | mandatory | Total number of FRMR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.37 | Columncdx6500xdlcsdlcUPInFrames | read-only | mandatory | Total number of UP frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.38 | Columncdx6500xdlcsdlcUPOutFrames | read-only | mandatory | Total number of UP frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.39 | Columncdx6500xdlcsdlcTESTInFrames | read-only | mandatory | Total number of TEST frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.40 | Columncdx6500xdlcsdlcTESTOutFrames | read-only | mandatory | Total number of TEST frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.41 | Columncdx6500xdlcsdlcQSMInFrames | read-only | mandatory | Total number of QSM packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.42 | Columncdx6500xdlcsdlcQSMOutFrames | read-only | mandatory | Total number of QSM packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.43 | Columncdx6500xdlcsdlcQUAInFrames | read-only | mandatory | Total number of QUA packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.44 | Columncdx6500xdlcsdlcQUAOutFrames | read-only | mandatory | Total number of QUA packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.45 | Columncdx6500xdlcsdlcQRDInFrames | read-only | mandatory | Total number of QRD packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.46 | Columncdx6500xdlcsdlcQRDOutFrames | read-only | mandatory | Total number of QRD packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.47 | Columncdx6500xdlcsdlcQFRMRInFrames | read-only | mandatory | Total number of QFRMR packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.48 | Columncdx6500xdlcsdlcQFRMROutFrames | read-only | mandatory | Total number of QFRMR packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.49 | Columncdx6500xdlcsdlcQXIDInFrames | read-only | mandatory | Total number of QXID packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.50 | Columncdx6500xdlcsdlcQXIDOutFrames | read-only | mandatory | Total number of QXID packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.51 | Columncdx6500xdlcsdlcQDCInFrames | read-only | mandatory | Total number of QDC packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.52 | Columncdx6500xdlcsdlcQDCOutFrames | read-only | mandatory | Total number of QDC packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.53 | Columncdx6500xdlcsdlcQDMInFrames | read-only | mandatory | Total number of QDM packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.54 | Columncdx6500xdlcsdlcQDMOutFrames | read-only | mandatory | Total number of QDM packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.55 | Columncdx6500xdlcsdlcQTESTInFrames | read-only | mandatory | Total number of QTEST packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.56 | Columncdx6500xdlcsdlcQTESTOutFrames | read-only | mandatory | Total number of QTEST packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.57 | Columncdx6500xdlcsdlcQSSInFrames | read-only | mandatory | Total number of QSS packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.58 | Columncdx6500xdlcsdlcQSSOutFrames | read-only | mandatory | Total number of QSS packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.59 | Columncdx6500xdlcsdlcQRSInFrames | read-only | mandatory | Total number of QRS packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.60 | Columncdx6500xdlcsdlcQRSOutFrames | read-only | mandatory | Total number of QRS packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.61 | Columncdx6500xdlcsdlcXIDNullInFrames | read-only | mandatory | Total number of XID Null frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.62 | Columncdx6500xdlcsdlcXIDNullOutFrames | read-only | mandatory | Total number of XID Null frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.63 | Columncdx6500xdlcsdlcXID0InFrames | read-only | mandatory | Total number of XID Type 0 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.64 | Columncdx6500xdlcsdlcXID0OutFrames | read-only | mandatory | Total number of XID Type 0 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.65 | Columncdx6500xdlcsdlcXID1InFrames | read-only | mandatory | Total number of XID Type 1 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.66 | Columncdx6500xdlcsdlcXID1OutFrames | read-only | mandatory | Total number of XID Type 1 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.67 | Columncdx6500xdlcsdlcXID3InFrames | read-only | mandatory | Total number of XID Type 3 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.68 | Columncdx6500xdlcsdlcXID3OutFrames | read-only | mandatory | Total number of XID Type 3 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.69 | Columncdx6500xdlcsdlcVSNumber | read-only | mandatory | Next VS seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.70 | Columncdx6500xdlcsdlcVRNumber | read-only | mandatory | Next VR seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.71 | Columncdx6500xdlcsdlcNRNumber | read-only | mandatory | Next NR seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.72 | Columncdx6500xdlcsdlcNSNumber | read-only | mandatory | Next NS seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2 | Tablecdx6500SPSTXDLCMX25StnTable | not-accessible | mandatory | All of the statistics parameters relevant to the XDLC MX.25 Station table. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1 | Rowcdx6500SPSTXDLCMX25StnEntry | not-accessible | mandatory | A row of XDLC MX.25 Station statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.1 | Columncdx6500xdlcmx25StatsPortNum | read-only | mandatory | Refers to the physical port number. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.2 | Columncdx6500xdlcmx25StatsStationNum | read-only | mandatory | Station reference number. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.3 | Columncdx6500xdlcmx25UtilizationIn | read-only | mandatory | Indicates the percentage of station resources currently in use from the line to the port. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.4 | Columncdx6500xdlcmx25UtilizationOut | read-only | mandatory | Indicates the percentage of station resources currently in use from the port to the line. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.5 | Columncdx6500xdlcmx25CharInTotal | read-only | mandatory | Total number of characters processed until now, not including frame and packet headers. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.6 | Columncdx6500xdlcmx25CharOutTotal | read-only | mandatory | Total number of characters processed until now, not including frame and packet headers. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.7 | Columncdx6500xdlcmx25CharsInPerSec | read-only | mandatory | The average number of characters received per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.8 | Columncdx6500xdlcmx25CharsOutPerSec | read-only | mandatory | The average number of characters transmitted per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.9 | Columncdx6500xdlcmx25PktInTotal | read-only | mandatory | Total number of data packets passed through the station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.10 | Columncdx6500xdlcmx25PktOutTotal | read-only | mandatory | Total number of data packets passed through the station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.11 | Columncdx6500xdlcmx25PktsInPerSec | read-only | mandatory | The average number of packets received per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.12 | Columncdx6500xdlcmx25PktsOutPerSec | read-only | mandatory | The average number of packets transmitted per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.13 | Columncdx6500xdlcmx25PacketsQueued | read-only | mandatory | Total number of packets queued at the MX25 protocol layer. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.14 | Columncdx6500xdlcmx25FrameInTotal | read-only | mandatory | Total number of frames processed until now. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.15 | Columncdx6500xdlcmx25FrameOutTotal | read-only | mandatory | Total number of frames processed until now. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.16 | Columncdx6500xdlcmx25FramesInPerSec | read-only | mandatory | The average number of frames received per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.17 | Columncdx6500xdlcmx25FramesOutPerSec | read-only | mandatory | The average number of frames transmitted per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.18 | Columncdx6500xdlcmx25RNRFramesIn | read-only | mandatory | Indicates the total number of RNR frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.19 | Columncdx6500xdlcmx25RNRFramesOut | read-only | mandatory | Indicates the total number of RNR frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.20 | Columncdx6500xdlcmx25RRFramesIn | read-only | mandatory | Indicates the total number of RR frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.21 | Columncdx6500xdlcmx25RRFramesOut | read-only | mandatory | Indicates the total number of RR frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.22 | Columncdx6500xdlcmx25REJFramesIn | read-only | mandatory | Indicates the total number of REJ frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.23 | Columncdx6500xdlcmx25REJFramesOut | read-only | mandatory | Indicates the total number of REJ frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.24 | Columncdx6500xdlcmx25DataPktsIn | read-only | mandatory | Indicates the total number of packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.25 | Columncdx6500xdlcmx25DataPktsOut | read-only | mandatory | Indicates the total number of packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.26 | Columncdx6500xdlcmx25MaxSVC | read-only | mandatory | The maximum number SVC channels used by this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.27 | Columncdx6500xdlcmx25CurrentSVC | read-only | mandatory | The number of SVC channels currently in use. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.28 | Columncdx6500xdlcmx25MaxPVC | read-only | mandatory | The maximum number PVC channels used by this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.29 | Columncdx6500xdlcmx25CurrentPVC | read-only | mandatory | The number of PVC channels currently in use. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.30 | Columncdx6500xdlcmx25InfoInFrames | read-only | mandatory | Indicates the total number of Info frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.31 | Columncdx6500xdlcmx25InfoOutFrames | read-only | mandatory | Indicates the total number of Info frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.32 | Columncdx6500xdlcmx25SNRMInFrames | read-only | mandatory | Indicates the total number of SNRM frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.33 | Columncdx6500xdlcmx25SNRMOutFrames | read-only | mandatory | Indicates the total number of SNRM frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.34 | Columncdx6500xdlcmx25UAInFrames | read-only | mandatory | Indicates the total number of UA frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.35 | Columncdx6500xdlcmx25UAOutFrames | read-only | mandatory | Indicates the total number of UA frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.36 | Columncdx6500xdlcmx25FRMRInFrames | read-only | mandatory | Indicates the total number of FRMR frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.37 | Columncdx6500xdlcmx25FRMROutFrames | read-only | mandatory | Indicates the total number of FRMR frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.38 | Columncdx6500xdlcmx25RRInPkts | read-only | mandatory | Indicates the total number of RR packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.39 | Columncdx6500xdlcmx25RROutPkts | read-only | mandatory | Indicates the total number of RR packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.40 | Columncdx6500xdlcmx25RNRInPkts | read-only | mandatory | Indicates the total number of RNR packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.41 | Columncdx6500xdlcmx25RNROutPkts | read-only | mandatory | Indicates the total number of RNR packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.42 | Columncdx6500xdlcmx25REJInPkts | read-only | mandatory | Indicates the total number of REJ packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.43 | Columncdx6500xdlcmx25REJOutPkts | read-only | mandatory | Indicates the total number of REJ packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.44 | Columncdx6500xdlcmx25InCallReqs | read-only | mandatory | Indicates the total number of Call Request packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.45 | Columncdx6500xdlcmx25OutCallReqs | read-only | mandatory | Indicates the total number of Call Request packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.46 | Columncdx6500xdlcmx25InCallAccepts | read-only | mandatory | Indicates the total number of Call Accept packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.47 | Columncdx6500xdlcmx25OutCallAccepts | read-only | mandatory | Indicates the total number of Call Accept packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.48 | Columncdx6500xdlcmx25InClearReqs | read-only | mandatory | Indicates the total number of Clear Request packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.49 | Columncdx6500xdlcmx25OutClearReqs | read-only | mandatory | Indicates the total number of Clear Request packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.50 | Columncdx6500xdlcmx25InClearConfs | read-only | mandatory | Indicates the total number of Clear confirmation packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.51 | Columncdx6500xdlcmx25OutClearConfs | read-only | mandatory | Indicates the total number of Clear confirmation packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.52 | Columncdx6500xdlcmx25InInterruptReqs | read-only | mandatory | Indicates the total number of Interrupt Request packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.53 | Columncdx6500xdlcmx25OutInterruptReqs | read-only | mandatory | Indicates the total number of Interrupt Request packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.54 | Columncdx6500xdlcmx25InInterruptConfs | read-only | mandatory | Indicates the total number of Interrupt Confimation packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.55 | Columncdx6500xdlcmx25OutInterruptConfs | read-only | mandatory | Indicates the total number of Interrupt Confirmation packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.56 | Columncdx6500xdlcmx25InResetReqs | read-only | mandatory | Indicates the total number of Reset Request packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.57 | Columncdx6500xdlcmx25OutResetReqs | read-only | mandatory | Indicates the total number of Reset Request packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.58 | Columncdx6500xdlcmx25InResetConfs | read-only | mandatory | Indicates the total number of Reset Confimation packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.59 | Columncdx6500xdlcmx25OutResetConfs | read-only | mandatory | Indicates the total number of Reset Confirmation packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.60 | Columncdx6500xdlcmx25InRestartReqs | read-only | mandatory | Indicates the total number of Restart Request packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.61 | Columncdx6500xdlcmx25OutRestartReqs | read-only | mandatory | Indicates the total number of Restart Request packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.62 | Columncdx6500xdlcmx25InRestartConfs | read-only | mandatory | Indicates the total number of Restart Confimation packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.63 | Columncdx6500xdlcmx25OutRestartConfs | read-only | mandatory | Indicates the total number of Restart Confirmation packets transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.64 | Columncdx6500xdlcmx25LastInLCN | read-only | mandatory | Channel number of last inbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.65 | Columncdx6500xdlcmx25InStatus | read-only | mandatory | Success : Message has been through the network successfully. Process OK, call passed to ROUTE : Inbound call has been processed and passed to Route and is bein… |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.66 | Columncdx6500xdlcmx25LICBPCalledAddr | read-only | mandatory | Last inbound call before processing: the X.25 address that was called. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.67 | Columncdx6500xdlcmx25LICBPCallingAddr | read-only | mandatory | Last inbound call before processing: the X.25 address that initiated the call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.68 | Columncdx6500xdlcmx25LICBPFacilities | read-only | mandatory | Last inbound call before processing: the facilities that were requested in the most recent call request packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.69 | Columncdx6500xdlcmx25LICBPCUD | read-only | mandatory | Last inbound call before processing: Call User Data contains end-user or routing information specific to the network. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.70 | Columncdx6500xdlcmx25LICAPCalledAddr | read-only | mandatory | Last inbound call after processing: the X.25 address that was called. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.71 | Columncdx6500xdlcmx25LICAPCallingAddr | read-only | mandatory | Last inbound call after processing: the X.25 address that initiated the call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.72 | Columncdx6500xdlcmx25LICAPFacilities | read-only | mandatory | Last inbound call after processing: the facilities that were requested in the most recent call request packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.73 | Columncdx6500xdlcmx25LICAPCUD | read-only | mandatory | Last inbound call after processing: Call User Data contains end-user or routing information specific to the network. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.74 | Columncdx6500xdlcmx25LastOutLCN | read-only | mandatory | Channel number of last outbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.75 | Columncdx6500xdlcmx25OutStatus | read-only | mandatory | Success : Message has been through the network successfully. Process OK, call passed to ROUTE : Inbound call has been processed and passed to Route and is bein… |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.76 | Columncdx6500xdlcmx25LOCBPCalledAddr | read-only | mandatory | Last outbound call before processing: the X.25 address that was called. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.77 | Columncdx6500xdlcmx25LOCBPCallingAddr | read-only | mandatory | Last outbound call before processing: the X.25 address that initiated the call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.78 | Columncdx6500xdlcmx25LOCBPFacilities | read-only | mandatory | Last outbound call before processing: the facilities that were requested in the most recent call request packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.79 | Columncdx6500xdlcmx25LOCBPCUD | read-only | mandatory | Last outbound call before processing: Call User Data contains end-user or routing information specific to the network. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.80 | Columncdx6500xdlcmx25LOCAPCalledAddr | read-only | mandatory | Last outbound call after processing: the X.25 address that was called. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.81 | Columncdx6500xdlcmx25LOCAPCallingAddr | read-only | mandatory | Last outbound call after processing: the X.25 address that initiated the call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.82 | Columncdx6500xdlcmx25LOCAPFacilities | read-only | mandatory | Last outbound call after processing: the facilities that were requested in the most recent call request packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.83 | Columncdx6500xdlcmx25LOCAPCUD | read-only | mandatory | Last outbound call after processing: Call User Data contains end-user or routing information specific to the network. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.7 | Nodecdx6500ContXDLC | |||
| 1.3.6.1.4.1.449.2.1.4.7.1 | Tablecdx6500ContXDLCStationTable | not-accessible | mandatory | All of the control parameters relevant to the XDLC Station table. |
| 1.3.6.1.4.1.449.2.1.4.7.1.1 | Rowcdx6500ContXDLCStationEntry | not-accessible | mandatory | A row of XDLC Station Control parameters. |
| 1.3.6.1.4.1.449.2.1.4.7.1.1.1 | Columncdx6500xdlcsContPortNum | not-accessible | mandatory | XDLC Port Number. |
| 1.3.6.1.4.1.449.2.1.4.7.1.1.2 | Columncdx6500xdlcsContStationNum | not-accessible | mandatory | XDLC Station Number |
| 1.3.6.1.4.1.449.2.1.4.7.1.1.3 | Columncdx6500xdlcsContBootStation | write-only | mandatory | Boots the specified XDLC station. boot - Boot Station. noBoot- Do not boot Station. |
| 1.3.6.1.4.1.449.2.1.4.7.1.1.4 | Columncdx6500xdlcsContDisableStation | write-only | mandatory | Disables the specified XDLC station. disable - Disable Station. noDisable - Do not disable Station. |
| 1.3.6.1.4.1.449.2.1.4.7.1.1.5 | Columncdx6500xdlcsContEnableStation | write-only | mandatory | Enables the specified XDLC station. enable - Enable Station noEnable - Not not enable Station |
| 1.3.6.1.4.1.449.2.1.4.7.1.1.6 | Columncdx6500xdlcsContResetStnStats | write-only | mandatory | Resets statistics for the specified XDLC station reset - Reset Station Statistics noReset - Do not reset Station Statistics |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Counter16 | INTEGER (0..65535) | ||
| DisplayString | OCTET STRING |