XEDIA-DS1-MIB
55 objects
This module defines additional objects for management of DS1 links in Xedia devices, above and beyond what is defined in the standard DS1 mib, and proposed drafts.
Imported Objects
| RFC1406-MIB | dsx1ConfigEntry dsx1CurrentEntry dsx1IntervalEntry dsx1TotalEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| XEDIA-REG | xediaMibs |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.838.3.18 | IdentityxediaDs1MIB | This module defines additional objects for management of DS1 links in Xedia devices, above and beyond what is defined in the standard DS1 mib, and proposed dra… | ||
| 1.3.6.1.4.1.838.3.18.1 | NodexDs1Objects | |||
| 1.3.6.1.4.1.838.3.18.2 | NodexDs1Tables | |||
| 1.3.6.1.4.1.838.3.18.2.1 | TablexDsx1ConfigTable | not-accessible | current | The Xedia DS1 Config table contains extensions to the DS1 Config table. |
| 1.3.6.1.4.1.838.3.18.2.1.1 | RowxDsx1ConfigEntry | not-accessible | current | An entry in the Xedia DS1 Config table. |
| 1.3.6.1.4.1.838.3.18.2.1.1.1 | Columnxdsx1LineStatus | read-only | current | Indicates the line status of the interface. This obect is identical to dsx1LineStatus in the DS1 MIB except that it uses the SNMPv2 BIT STRING object type. |
| 1.3.6.1.4.1.838.3.18.2.1.1.2 | Columnxdsx1LoopbackStatus | read-only | current | Indicates the local and remote loopback status of the interface. This object is identical to dsx1LoopbackStatus in the DS1 MIB except that it uses the SNMPv2 B… |
| 1.3.6.1.4.1.838.3.18.2.1.1.3 | Columnxdsx1CfgCrcMode | read-write | current | The configured CRC mode of the interface. |
| 1.3.6.1.4.1.838.3.18.2.1.1.4 | Columnxdsx1CfgLineBuildOut | read-write | current | The line buildout of the ds1. |
| 1.3.6.1.4.1.838.3.18.2.1.1.5 | Columnxdsx1CfgLineInterface | read-write | current | The line buildout of the ds1. |
| 1.3.6.1.4.1.838.3.18.2.1.1.6 | Columnxdsx1CfgInsertTVerrs | read-write | current | The number of Line Code Violation (LCV) errors to inject. |
| 1.3.6.1.4.1.838.3.18.2.1.1.7 | Columnxdsx1CfgInsertTFerrs | read-write | current | The number of Frame Bit (FBE) errors to inject. |
| 1.3.6.1.4.1.838.3.18.2.1.1.8 | Columnxdsx1CfgInsertTCerrs | read-write | current | The number of Checksum (CRC) errors to inject. |
| 1.3.6.1.4.1.838.3.18.2.1.1.9 | Columnxdsx1CfgInsertTBerrs | read-write | current | The number of PRBS errors to inject. |
| 1.3.6.1.4.1.838.3.18.2.1.1.10 | Columnxdsx1CfgChannelMask | read-write | current | The number of PRBS errors to inject. |
| 1.3.6.1.4.1.838.3.18.2.1.1.11 | Columnxdsx1OutOfFrames | read-only | current | The number of 'out of frame' errors. |
| 1.3.6.1.4.1.838.3.18.2.1.1.12 | Columnxdsx1ChangeOfFrameAlignment | read-only | current | The number of times frames changed alignment. |
| 1.3.6.1.4.1.838.3.18.2.1.1.13 | Columnxdsx1CfgLoopbackConfig | read-write | current | This variable represents the loopback configuration of the DS1 interface. Agents supporting read/write access should return badValue in response to a requested… |
| 1.3.6.1.4.1.838.3.18.2.1.1.14 | Columnxdsx1CfgTestCode | read-write | current | This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: xdsx1SendNone - sending looped or normal dat… |
| 1.3.6.1.4.1.838.3.18.2.1.1.15 | Columnxdsx1CfgLineCharacteristics | read-write | current | The valid combinations of interface type, and buildout for the circuit. |
| 1.3.6.1.4.1.838.3.18.2.1.1.16 | Columnxdsx1CfgLineType | read-write | current | The line type of the circuit. |
| 1.3.6.1.4.1.838.3.18.2.1.1.17 | Columnxdsx1CfgLineCoding | read-write | current | The line coding of the circuit. |
| 1.3.6.1.4.1.838.3.18.2.2 | TablexDsx1CurrentTable | not-accessible | current | The Xedia DS1 Current table contains extensions to the DS1 Current table which includes statistics being collected for the current 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.2.1 | RowxDsx1CurrentEntry | not-accessible | current | An entry in the Xedia DS1 Current table. |
| 1.3.6.1.4.1.838.3.18.2.2.1.1 | Columnxdsx1CurrentFBEs | read-only | current | The number of F Bit Errores encountered during the current 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.2.1.2 | Columnxdsx1CurrentFEBEs | read-only | current | The number of Far End Block Errors encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.2.1.3 | Columnxdsx1CurrentCRCEs | read-only | current | The number of CRC errors encountered during the current 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.2.1.4 | Columnxdsx1CurrentLCEs | read-only | current | The number of Line Coding Errors encountered during the current 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.2.1.5 | Columnxdsx1CurrentBEs | read-only | current | The number of Bit Errors encountered during the current 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.2.1.6 | Columnxdsx1CurrentSlips | read-only | current | The number of rx/tx slips encountered during the current 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.2.1.7 | Columnxdsx1CurrentLineStatus | read-only | current | The bitwise ORing of the dsx1LineStatus values (line status) encountered during the current 15 minute interval. This object is useful in identifying all xdsx1L… |
| 1.3.6.1.4.1.838.3.18.2.3 | TablexDsx1IntervalTable | not-accessible | current | The Xedia DS1 Interval Table contains extensions to the DS1 Interval table which includes statistics collected over the previous 24 hours of operation. The pas… |
| 1.3.6.1.4.1.838.3.18.2.3.1 | RowxDsx1IntervalEntry | not-accessible | current | An entry in the Xedia DS1 Interval Table. |
| 1.3.6.1.4.1.838.3.18.2.3.1.1 | Columnxdsx1IntervalFBEs | read-only | current | The number of F Bit Errores encountered during the specified 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.3.1.2 | Columnxdsx1IntervalFEBEs | read-only | current | The number of Far End Block Errors encountered in the specified 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.3.1.3 | Columnxdsx1IntervalCRCEs | read-only | current | The number of CRC errors encountered during the specified 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.3.1.4 | Columnxdsx1IntervalLCEs | read-only | current | The number of Line Coding Errors encountered during the specified 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.3.1.5 | Columnxdsx1IntervalBEs | read-only | current | The number of Bit Errors encountered during the specified 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.3.1.6 | Columnxdsx1IntervalSlips | read-only | current | The number of rx/tx slips encountered during the specified 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.3.1.7 | Columnxdsx1IntervalLineStatus | read-only | current | The bitwise ORing of the dsx1LineStatus values (line status) encountered during the specified 15 minute interval. This object is useful in identifying all xdsx… |
| 1.3.6.1.4.1.838.3.18.2.4 | TablexDsx1TotalTable | not-accessible | current | The Xedia DS1 Total Table contains extensions to the DS1 Total table which includes cumulative sums of the various statistics for the 24 hour period preceding … |
| 1.3.6.1.4.1.838.3.18.2.4.1 | RowxDsx1TotalEntry | not-accessible | current | An entry in the Xedai DS1 Total Table. |
| 1.3.6.1.4.1.838.3.18.2.4.1.1 | Columnxdsx1TotalFBEs | read-only | current | The sum of F Bit Errores encountered during all 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.4.1.2 | Columnxdsx1TotalFEBEs | read-only | current | The sum of Far End Block Errors encountered for all of the 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.4.1.3 | Columnxdsx1TotalCRCEs | read-only | current | The sum of CRC errors encountered for all of the 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.4.1.4 | Columnxdsx1TotalLCEs | read-only | current | The sum of Line Coding Errors encountered for all of the 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.4.1.5 | Columnxdsx1TotalBEs | read-only | current | The sum of Bit Errors encountered during of the 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.4.1.6 | Columnxdsx1TotalSlips | read-only | current | The sum of rx/tx slips encountered during of the 15 minute interval. |
| 1.3.6.1.4.1.838.3.18.2.4.1.7 | Columnxdsx1TotalLineStatus | read-only | current | The bitwise ORing of the dsx1LineStatus values (line status) encountered during all of the 15 minute intervals. This object is useful in identifying all xdsx1L… |
| 1.3.6.1.4.1.838.3.18.3 | NodexDs1Conformance | |||
| 1.3.6.1.4.1.838.3.18.3.1 | NodexDs1Compliances | |||
| 1.3.6.1.4.1.838.3.18.3.1.1 | CompliancexDs1Compliance | current | The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. | |
| 1.3.6.1.4.1.838.3.18.3.2 | NodexDs1Groups | |||
| 1.3.6.1.4.1.838.3.18.3.2.1 | GroupxDs1AllGroup | current | The set of all accessible objects in this MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| XDsx1LineStatus | BIT STRING { noAlarm(0), rcvFarEndLOF(1), xmitFarEndLOF(2), rcvAIS(3), xmitAIS(4), lossOfFrame(5), lossOfSignal(6), loopbackState(7), t16AIS(8), rcvFarEndLOMF(9), xmitFarEndLOMF(10), rcvTestCode(11), otherFailure(12) } | current | This type is a bit string representing a sum of line conditions, therefore, it can indicate multiple failures and loopback simultaneously. The value dsx1NoAlarm is set if and only if no other flag is set. |