XEDIA-POLICY-MIB
117 objects
This module defines objects for the management of Routing Policies in Xedia devices.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| XEDIA-REG | xediaMibs |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.838.3.10 | IdentityxediaPolicyMIB | This module defines objects for the management of Routing Policies in Xedia devices. | ||
| 1.3.6.1.4.1.838.3.10.1 | NodexpolicyObjects | |||
| 1.3.6.1.4.1.838.3.10.1.1 | NodexpolicyGeneral | |||
| 1.3.6.1.4.1.838.3.10.1.2 | NodexpolicyCounts | |||
| 1.3.6.1.4.1.838.3.10.1.2.1 | NodexpolicyRxCounts | |||
| 1.3.6.1.4.1.838.3.10.1.2.1.1 | ScalarxpolicyNumRxConfiguredTotal | read-only | current | The total number of configured 'receive' policies. |
| 1.3.6.1.4.1.838.3.10.1.2.1.2 | ScalarxpolicyNumRxConfiguredValid | read-only | current | Represents the number of configured 'receive' policies that have a RowStatus of 'active'. This means that they are configured correctly without any conflicts a… |
| 1.3.6.1.4.1.838.3.10.1.2.1.3 | ScalarxpolicyNumRxConfiguredInValid | read-only | current | Represents the number of configured 'receive' policies that have a RowStatus of 'notReady'. This means that they are configured, but have conflicts among the e… |
| 1.3.6.1.4.1.838.3.10.1.2.1.4 | ScalarxpolicyNumRxInUseTotal | read-only | current | Represents the number of 'receive' policies that are currently being used by the run-time application. Normally this number is the same as the number of Config… |
| 1.3.6.1.4.1.838.3.10.1.2.1.5 | ScalarxpolicyNumRxInUseBGP | read-only | current | Represents the number of BGP 'receive' policies that are currently being used by the run-time application. |
| 1.3.6.1.4.1.838.3.10.1.2.1.6 | ScalarxpolicyNumRxInUseOSPF | read-only | current | Represents the number of OSPF 'receive' policies that are currently being used by the run-time application. |
| 1.3.6.1.4.1.838.3.10.1.2.1.7 | ScalarxpolicyNumRxInUseRIP | read-only | current | Represents the number of RIP 'receive' policies that are currently being used by the run-time application. |
| 1.3.6.1.4.1.838.3.10.1.2.1.8 | ScalarxpolicyNumRxInUseStatic | read-only | current | Represents the number of static 'receive' policies that are currently being used by the run-time application. |
| 1.3.6.1.4.1.838.3.10.1.2.2 | NodexpolicyTxCounts | |||
| 1.3.6.1.4.1.838.3.10.1.2.2.1 | ScalarxpolicyNumTxConfiguredTotal | read-only | current | The total number of configured 'send' policies. |
| 1.3.6.1.4.1.838.3.10.1.2.2.2 | ScalarxpolicyNumTxConfiguredValid | read-only | current | Represents the number of configured 'send' policies that have a RowStatus of 'active'. This means that they are configured correctly without any conflicts amon… |
| 1.3.6.1.4.1.838.3.10.1.2.2.3 | ScalarxpolicyNumTxConfiguredInValid | read-only | current | Represents the number of configured 'send' policies that have a RowStatus of 'notReady'. This means that they are configured, but have conflicts among the elem… |
| 1.3.6.1.4.1.838.3.10.1.2.2.4 | ScalarxpolicyNumTxInUseTotal | read-only | current | Represents the number of 'send' policies that are currently being used by the run-time application. Normally this number is the same as the number of Configure… |
| 1.3.6.1.4.1.838.3.10.1.2.2.5 | ScalarxpolicyNumTxInUseBGP | read-only | current | Represents the number of BGP 'send' policies that are currently being used by the run-time application. |
| 1.3.6.1.4.1.838.3.10.1.2.2.6 | ScalarxpolicyNumTxInUseOSPF | read-only | current | Represents the number of OSPF 'send' policies that are currently being used by the run-time application. |
| 1.3.6.1.4.1.838.3.10.1.2.2.7 | ScalarxpolicyNumTxInUseRIP | read-only | current | Represents the number of RIP 'send' policies that are currently being used by the run-time application. |
| 1.3.6.1.4.1.838.3.10.2 | NodexpolicyTables | |||
| 1.3.6.1.4.1.838.3.10.2.1 | NodexpolicyRouting | |||
| 1.3.6.1.4.1.838.3.10.2.1.1 | TablexpolicyReceiveTable | not-accessible | current | This entity's Route Policy Receive table. |
| 1.3.6.1.4.1.838.3.10.2.1.1.1 | RowxpolicyReceiveEntry | not-accessible | current | An entry to the Route Policy Receive Table. |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.1 | ColumnxpolicyRxProtocol | read-only | current | The protocol from which the update was received. |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.2 | ColumnxpolicyRxPeer | read-only | current | The destination IP address of the routing update. If it is zero, then all peers are accepted. |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.3 | ColumnxpolicyRxName | read-only | current | A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, the priority numbers allow hiearc… |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.4 | ColumnxpolicyRxAddrStart | read-create | current | The base of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.5 | ColumnxpolicyRxAddrEnd | read-create | current | The end of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.6 | ColumnxpolicyRxAsString | read-create | current | A string describing a complete, or partial 'Autonomyous System' inwhich to perform matches. This string uses a limited form of regular expression syntax to def… |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.7 | ColumnxpolicyRxCommunityId | read-create | current | Allows matching on one of the integers listed in the community attrubute list. This is only valid for routes sourced from BGP. |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.8 | ColumnxpolicyRxReceiveOption | read-create | current | Receive action/options taken on 'matching' entries. |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.9 | ColumnxpolicyRxLocalPref | read-create | current | A positive four byte integer defining the preference to a matched routes. Higher values assign greater preference. Internal routes use 0xffffffff. note: It is … |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.10 | ColumnxpolicyRxRowStatus | read-create | current | This object is used to add and remove entries from the table. |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.11 | ColumnxpolicyRxPrefixMin | read-create | current | Minimum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.1.1.12 | ColumnxpolicyRxPrefixMax | read-create | current | Maximum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2 | TablexpolicySendTable | not-accessible | current | This entity's Route Policy Send table. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1 | RowxpolicySendEntry | not-accessible | current | An entry to the Route Policy Table. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.1 | ColumnxpolicyTxProtocol | read-only | current | The protocol identifying where the update will be sent. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.2 | ColumnxpolicyTxPeer | read-only | current | The destination IP address of the routing update. If zero, then all peers receive them. For OSPF and RIP, this value should be zero. BGP should not use 0. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.3 | ColumnxpolicyTxName | read-only | current | A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, the priority numbers allow hiearc… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.4 | ColumnxpolicyTxSrcProtocol | read-create | current | The protocol identifying the origin of the update. Often this 'src protocol will be the same as the TX Protocol index. This allows routes learned by BGP to be … |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.5 | ColumnxpolicyTxSrcProtSubType | read-create | current | The protocol sub-type discription. Currently, this only applies to OSPF entries. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.6 | ColumnxpolicyTxAddrStart | read-create | current | The base of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.7 | ColumnxpolicyTxAddrEnd | read-create | current | The end of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.8 | ColumnxpolicyTxAsString | read-create | current | A string describing a complete, or partial 'Autonomyous System' inwhich to perform matches. This string uses a limited form of regular expression syntax to def… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.9 | ColumnxpolicyTxCommunityId | read-create | current | Allows matching on one of the integers listed in the community attrubute list. This is only valid for routes sourced from BGP. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.10 | ColumnxpolicyTxSendOption | read-create | current | Send action/options taken on 'matching' entries. Never, indicates that routes within the range are not sent to the peer. Normal, allows routes within the speci… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.11 | ColumnxpolicyTxMED | read-create | current | The 'Multi-Exit-Descriminator'. A lower value assigns a higher preference to the route. Normally, the MED attribute ia attached to all matched routes. Except i… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.12 | ColumnxpolicyTxMEDAuto | read-create | current | Admininstative status for calculating the 'Multi-Exit-Descriminator' using IGP_metric + 1. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.13 | ColumnxpolicyTxAsPrepend | read-create | current | The number of times to prepend the router's AS to the transmitted AS path in updates to the peer for all matching routes. note: It is only used for BGP. If it … |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.14 | ColumnxpolicyTxSendCommunityId | read-create | current | The value that is added to the community attribute for all matched routes. note: It is only used for BGP. If it is used (>0), then the 'xpolicyTxSendOption' ca… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.15 | ColumnxpolicyTxIgpMetric | read-create | current | The metric used for IGP. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.16 | ColumnxpolicyTxIgpMetricType | read-create | current | Type of metric being used. Currently, only for defining OSPF internal and external routes. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.17 | ColumnxpolicyTxIgpMetricAuto | read-create | current | Administrative status for generating an 'auto' metric. If set to localPref, the igp's metric is igpMetric - localPref. If set to MED, the the igp's metric is i… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.18 | ColumnxpolicyTxNextHopSelf | read-create | current | Setting this object to the value 'true(1)' will set the BGP NEXT_HOP attribute to the local router address instead of leaving it as it was received from an EBG… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.19 | ColumnxpolicyTxRowStatus | read-create | current | This object is used to add and remove entries from the table. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.20 | ColumnxpolicyTxPrefixMin | read-create | current | Minimum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.21 | ColumnxpolicyTxPrefixMax | read-create | current | Maximum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.2 | TablexpolicyDisplayTable | not-accessible | current | This table contains a read-only display of the internally linked list of policy entries. |
| 1.3.6.1.4.1.838.3.10.2.2.1 | RowxpolicyDisplayEntry | not-accessible | current | Individual piece of text information regarding a policy entry. |
| 1.3.6.1.4.1.838.3.10.2.2.1.1 | ColumnxpolicyDisplayIndex | not-accessible | current | The row number in the table. |
| 1.3.6.1.4.1.838.3.10.2.2.1.2 | ColumnxpolicyRxDisplayString | read-only | current | A single text line of information about a particular Receive policy. |
| 1.3.6.1.4.1.838.3.10.2.2.1.3 | ColumnxpolicyTxDisplayString | read-only | current | A single text line of information about a particular Send policy. |
| 1.3.6.1.4.1.838.3.10.2.3 | TablexpolicyPeerGroupTable | not-accessible | current | This table contains configuration for policy peer group members. |
| 1.3.6.1.4.1.838.3.10.2.3.1 | RowxpolicyPeerGroupEntry | not-accessible | current | Individual peer group configuration. |
| 1.3.6.1.4.1.838.3.10.2.3.1.1 | ColumnxpolicyPeerGroupIndex | read-only | current | The index used to identify this peer group. |
| 1.3.6.1.4.1.838.3.10.2.3.1.2 | ColumnxpolicyPeerGroupPeer | read-only | current | The peer contained in this group. |
| 1.3.6.1.4.1.838.3.10.2.3.1.3 | ColumnxpolicyPeerGroupRowStatus | read-create | current | This object is used to add and remove entries from the table. |
| 1.3.6.1.4.1.838.3.10.2.4 | NodexpolicyPriRouting | |||
| 1.3.6.1.4.1.838.3.10.2.4.1 | TablexpolicyPriReceiveTable | not-accessible | current | This entity's Route Policy Receive table. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1 | RowxpolicyPriReceiveEntry | not-accessible | current | An entry to the Route Policy Receive Table. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.1 | ColumnxpolicyPriRxProtocol | read-only | current | The protocol from which the update was received. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.2 | ColumnxpolicyPriRxPeer | read-create | current | The destination IP address of the routing update. If it is zero, then all peers are accepted. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.3 | ColumnxpolicyPriRxName | read-only | current | A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, the priority numbers allow hiearc… |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.4 | ColumnxpolicyPriRxAddrStart | read-create | current | The base of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.5 | ColumnxpolicyPriRxAddrEnd | read-create | current | The end of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.6 | ColumnxpolicyPriRxAsString | read-create | current | A string describing a complete, or partial 'Autonomyous System' inwhich to perform matches. This string uses a limited form of regular expression syntax to def… |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.7 | ColumnxpolicyPriRxCommunityId | read-create | current | Allows matching on one of the integers listed in the community attrubute list. This is only valid for routes sourced from BGP. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.8 | ColumnxpolicyPriRxReceiveOption | read-create | current | Receive action/options taken on 'matching' entries. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.9 | ColumnxpolicyPriRxLocalPref | read-create | current | A positive four byte integer defining the preference to a matched routes. Higher values assign greater preference. Internal routes use 0xffffffff. note: It is … |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.10 | ColumnxpolicyPriRxRowStatus | read-create | current | This object is used to add and remove entries from the table. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.11 | ColumnxpolicyPriRxPrefixMin | read-create | current | Minimum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.12 | ColumnxpolicyPriRxPrefixMax | read-create | current | Maximum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.4.1.1.13 | ColumnxpolicyPriRxDistance | read-create | current | Administrative distance value to be set to a matched route. |
| 1.3.6.1.4.1.838.3.10.2.4.2 | TablexpolicyPriSendTable | not-accessible | current | This entity's Route Policy Send table. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1 | RowxpolicyPriSendEntry | not-accessible | current | An entry to the Route Policy Table. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.1 | ColumnxpolicyPriTxProtocol | read-only | current | The protocol identifying where the update will be sent. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.2 | ColumnxpolicyPriTxPeer | read-create | current | The destination IP address of the routing update. If zero, then all peers receive them. For OSPF and RIP, this value should be zero. BGP should not use 0. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.3 | ColumnxpolicyPriTxName | read-only | current | A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, the priority numbers allow hiearc… |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.4 | ColumnxpolicyPriTxSrcProtocol | read-create | current | The protocol identifying the origin of the update. Often this 'src protocol will be the same as the TX Protocol index. This allows routes learned by BGP to be … |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.5 | ColumnxpolicyPriTxSrcProtSubType | read-create | current | The protocol sub-type discription. Currently, this only applies to OSPF entries. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.6 | ColumnxpolicyPriTxAddrStart | read-create | current | The base of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.7 | ColumnxpolicyPriTxAddrEnd | read-create | current | The end of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.8 | ColumnxpolicyPriTxAsString | read-create | current | A string describing a complete, or partial 'Autonomyous System' inwhich to perform matches. This string uses a limited form of regular expression syntax to def… |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.9 | ColumnxpolicyPriTxCommunityId | read-create | current | Allows matching on one of the integers listed in the community attrubute list. This is only valid for routes sourced from BGP. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.10 | ColumnxpolicyPriTxSendOption | read-create | current | Send action/options taken on 'matching' entries. Never, indicates that routes within the range are not sent to the peer. Normal, allows routes within the speci… |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.11 | ColumnxpolicyPriTxMED | read-create | current | The 'Multi-Exit-Descriminator'. A lower value assigns a higher preference to the route. Normally, the MED attribute ia attached to all matched routes. Except i… |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.12 | ColumnxpolicyPriTxMEDAuto | read-create | current | Admininstative status for calculating the 'Multi-Exit-Descriminator' using IGP_metric + 1. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.13 | ColumnxpolicyPriTxAsPrepend | read-create | current | The number of times to prepend the router's AS to the transmitted AS path in updates to the peer for all matching routes. note: It is only used for BGP. If it … |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.14 | ColumnxpolicyPriTxSendCommunityId | read-create | current | The value that is added to the community attribute for all matched routes. note: It is only used for BGP. If it is used (>0), then the 'xpolicyTxSendOption' ca… |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.15 | ColumnxpolicyPriTxIgpMetric | read-create | current | The metric used for IGP. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.16 | ColumnxpolicyPriTxIgpMetricType | read-create | current | Type of metric being used. Currently, only for defining OSPF internal and external routes. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.17 | ColumnxpolicyPriTxIgpMetricAuto | read-create | current | Administrative status for generating an 'auto' metric. If set to localPref, the igp's metric is igpMetric - localPref. If set to MED, the the igp's metric is i… |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.18 | ColumnxpolicyPriTxNextHopSelf | read-create | current | Setting this object to the value 'true(1)' will set the BGP NEXT_HOP attribute to the local router address instead of leaving it as it was received from an EBG… |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.19 | ColumnxpolicyPriTxRowStatus | read-create | current | This object is used to add and remove entries from the table. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.20 | ColumnxpolicyPriTxPrefixMin | read-create | current | Minimum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.4.2.1.21 | ColumnxpolicyPriTxPrefixMax | read-create | current | Maximum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.3 | NodexpolicyConformance | |||
| 1.3.6.1.4.1.838.3.10.3.1 | NodexpolicyCompliances | |||
| 1.3.6.1.4.1.838.3.10.3.1.1 | CompliancexpolicyCompliance | current | The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. | |
| 1.3.6.1.4.1.838.3.10.3.2 | NodexpolicyGroups | |||
| 1.3.6.1.4.1.838.3.10.3.2.1 | GroupxpolicyAllGroup | current | The set of all accessible objects in this MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| XPolicyAsString | DisplayString (SIZE (0..32)) | current | The AS string used to match paths. |
| XPolicyName | DisplayString (SIZE (1..32)) | current | The unique name used to identify an entry in a policy table. |
| XPriPolicyName | DisplayString (SIZE (1..32)) | current | The unique name used to identify an entry in a priority policy table. The name must contain at least one priority value which is interpreted in the getnext. This type of name MAY have a '[<priority value>]' prepended fo… |