MIB Viewer

XEROX-JOB-MONITORING-MIB

161 objects
File: 41jobmon.dfm, .mib, .txt, .pdf Version: 4.03.pub This MIB specifies job and document objects for monitoring print jobs, including accounting, of print jobs. This MIB does not provide for management and control of print jobs, such as cancelling or modifying them. If job control is desired, another MIB that augments this one should be developed. The groups in this MIB are arranged so that an additional MIB may be developed that supports monitoring of multifunction jobs (print, scan, FAX, etc.), including scan-only jobs. Such a MIB is intended to augment this MIB. See the companion Job Monitoring MIB textual conventions module: XEROX-JOB-MONITORING-TC for the textual conventions and for an explanation of the use of this MIB (see file 40jobtc.txt). The specification for many of the objects in this MIB is taken directly from the ISO 10175 Document Printing Application (DPA) standard, clause 9.2, Job Attributes and clause 9.3, Document Attributes. Such direct inclusions are explicitly indicated. However, this MIB is intended to be used with non-DPA implementations, so only a small set of general DPA attributes have been included in the Job Monitoring MIB. In addition, a single print-centric group is included. Finally, some of the ISO DPA specifications have been generalized so that they may be used with non-print job services. For example, changing the names and descriptions from 'printer' to 'device'. All such changes to ISO DPA text are indicated inside square brackets to make it clear how this Job Monitoring MIB differs from ISO DPA. Copyright 1996-2002 Xerox Corporation. All Rights Reserved. REFERENCES See 40jobtc.txt for the conformance requirements and textual conventions for use with this MIB module.
Imported Objects
HOST-RESOURCES-MIB2580 hrDeviceIndex InternationalDisplayString ProductID
SNMPv2-CONF2579 MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE
SNMPv2-TC2578 DateAndTime DisplayString RowStatus
XEROX-COMMON-MIB2790 xeroxCommonMIB
XEROX-GENERAL-TCCardinal16 Cardinal32 Cardinal64High Cardinal64Low CodeIndexedStringIndex mib Ordinal16 Ordinal32 zeroDotZero
XEROX-HOST-RESOURCES-EXT-TCmib XcmHrDevInfoXStatus XcmHrDevTrafficUnit
XEROX-JOB-MONITORING-TCXcmJMDocFileNameType XcmJMDocOutputMethod XcmJMDocState XcmJMDocType XcmJMGroupSupport XcmJMImpsCountType XcmJMJobServiceTypeOID XcmJMJobState XcmJMJobStateReasons XcmJMJobX2StateReasons XcmJMJobXStateReasons XcmJMMediumType
XEROX-PRINTER-EXT-TCmib XcmPrtChannelType XcmPrtInterpreterLangFamily XcmPrtMediumSize XcmPrtPrintQuality
OIDNameAccessStatusDescription
0.0.59NodexcmJobZeroDummy
1.3.6.1.4.1.253.8.59IdentityxcmJobMonMIBFile: 41jobmon.dfm, .mib, .txt, .pdf Version: 4.03.pub This MIB specifies job and document objects for monitoring print jobs, including accounting, of print jo…
1.3.6.1.4.1.253.8.59.1NodexcmJobMonBase
1.3.6.1.4.1.253.8.59.1.2TablexcmJobMonBaseTablenot-accessiblecurrentA table of general counters and capabilities for ease of use of the XCMI Job Monitoring MIB on this host system. Usage: The ONLY valid row in the 'xcmJobMonBas…
1.3.6.1.4.1.253.8.59.1.2.1RowxcmJobMonBaseEntrynot-accessiblecurrentAn entry of general counters and capabilities for ease of use of the XCMI Job Monitoring MIB on this host system. Usage: The ONLY valid row in the 'xcmJobMonBa…
1.3.6.1.4.1.253.8.59.1.2.1.1ColumnxcmJobMonBaseIndexnot-accessiblecurrentA unique value used by this host system to identify this conceptual row in the 'xcmJobMonBaseTable'. Usage: The ONLY valid row in the 'xcmJobMonBaseTable' shal…
1.3.6.1.4.1.253.8.59.1.2.1.2ColumnxcmJobMonBaseRowStatusread-onlycurrentThis object is used to display status of the ONLY valid conceptual row in the 'xcmJobMonBaseTable'. Usage: 'xcmJobMonBaseRowStatus' is 'read-only' because the …
1.3.6.1.4.1.253.8.59.1.2.1.3ColumnxcmJobMonBaseVersionIDread-onlycurrentThe software product ID of the SNMP sub-agent which implements the XCMI Job Monitoring MIB on this host system. Usage: This object shall specify the software p…
1.3.6.1.4.1.253.8.59.1.2.1.4ColumnxcmJobMonBaseVersionDateread-onlycurrentThe software build date of the SNMP sub-agent which implements the XCMI Job Monitoring MIB on this host system. Usage: This object shall specify the BUILD date…
1.3.6.1.4.1.253.8.59.1.2.1.5ColumnxcmJobMonBaseGroupSupportread-onlycurrentThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Job Monitoring MIB groups supported by this management agent imple…
1.3.6.1.4.1.253.8.59.1.2.1.6ColumnxcmJobMonBaseCreateSupportread-onlycurrentThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Job Monitoring MIB groups supported for dynamic row creation (via …
1.3.6.1.4.1.253.8.59.1.2.1.7ColumnxcmJobMonBaseUpdateSupportread-onlycurrentThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Job Monitoring MIB groups supported for existing row update (via S…
1.3.6.1.4.1.253.8.59.2NodexcmJobMonMIBConformance
1.3.6.1.4.1.253.8.59.2.1CompliancexcmJobMonCompliancecurrentThe mandatory compliance statement for the agents that implement the XCMI Job Monitoring MIB, i.e., all the mandatory groups. NOTE: These two groups are CONDIT…
1.3.6.1.4.1.253.8.59.2.3NodexcmJobMonMIBGroups
1.3.6.1.4.1.253.8.59.2.3.1GroupxcmJMBaseGroupcurrentThe conditionally mandatory Job Monitoring Base group, i.e., SHALL be implemented if implementing traps and/or SJMM.
1.3.6.1.4.1.253.8.59.2.3.6GroupxcmJMJobGenBasicGroupcurrentThe conditionally mandatory Job General Basic group, i.e., SHALL be implemented if implementing traps and/or SJMM.
1.3.6.1.4.1.253.8.59.2.3.7GroupxcmJMDevicesAssignedGroupcurrentThe deprecated Devices Assigned group.
1.3.6.1.4.1.253.8.59.2.3.8GroupxcmJMClientIdMapGroupcurrentThe optional client id map group - applies to all jobs.
1.3.6.1.4.1.253.8.59.2.3.10GroupxcmJMJobGenExtGroupcurrentThe Job General Extended group.
1.3.6.1.4.1.253.8.59.2.3.12GroupxcmJMDocGenBasicGroupcurrentThe document information group.
1.3.6.1.4.1.253.8.59.2.3.13GroupxcmJMDocPrintExtGroupcurrentThe Document Print-centric group.
1.3.6.1.4.1.253.8.59.2.3.14GroupxcmJMJobGenSpoolingBasicGroupcurrentThe Job General Spooling Basic group.
1.3.6.1.4.1.253.8.59.2.3.15GroupxcmJMJobGenSpoolingExtGroupcurrentThe Job General Spooling Extended group.
1.3.6.1.4.1.253.8.59.2.3.16GroupxcmJMJobGenAccountingBasicGroupcurrentThe Job General Accounting Basic group.
1.3.6.1.4.1.253.8.59.2.3.17GroupxcmJMMediaConsumedGroupcurrentThe media consumed group.
1.3.6.1.4.1.253.8.59.2.3.18GroupxcmJMColorImpsConsumedGroupcurrentThe optional color impressions consumed group.
1.3.6.1.4.1.253.8.59.2.3.21GroupxcmJMJobImpsByMediumSizeGroupcurrentThe Job Impressions by Medium Size group.
1.3.6.1.4.1.253.8.59.6NodexcmJobGenBasic
1.3.6.1.4.1.253.8.59.6.1TablexcmJobGenBasicTablenot-accessiblecurrentA table of general mandatory job information per (logical or physical) device that is independent of the type of device (printer, scanner, fax, ...) and that d…
1.3.6.1.4.1.253.8.59.6.1.1RowxcmJobGenBasicEntrynot-accessiblecurrentAn entry exists in this table for each job in the device, no matter what the state of the job is. Each device is represented as a separate device entry in the …
1.3.6.1.4.1.253.8.59.6.1.1.1ColumnxcmJobIdentifierOnSystemread-onlycurrentThe job identifier generated on the system that the agent is instrumenting. The job identifier is generated by the job service provider when it accepts a submi…
1.3.6.1.4.1.253.8.59.6.1.1.2ColumnxcmJobIdentifierUpstreamread-onlycurrentUniquely identifies the job on the immediately upstream client, server or device as generated by that client, server or device. The server or device is specifi…
1.3.6.1.4.1.253.8.59.6.1.1.3ColumnxcmJobClientIdread-onlycurrentA client end system supplies the 'xcmJobClientId' attribute to clearly identify jobs which that client has submitted to the server. This attribute is used as o…
1.3.6.1.4.1.253.8.59.6.1.1.4ColumnxcmJobServiceTyperead-onlycurrentJob-service-type (ISO DPA extension) This attribute specifies the type of the service to which this job was submitted. The value of this object is filled in by…
1.3.6.1.4.1.253.8.59.6.1.1.5ColumnxcmJobNameread-onlycurrentISO DPA: Job-name This attribute supplies a human readable string for the print- job. This string is used for naming the print-job in human- readable 'free-for…
1.3.6.1.4.1.253.8.59.6.1.1.6ColumnxcmJobOwnerread-onlycurrentISO DPA: Job-owner This attribute supplies the name of the human owner of the print-job. The value of job-owner will often be the same as job- originator. The …
1.3.6.1.4.1.253.8.59.6.1.1.7ColumnxcmJobSourceChannelTyperead-onlycurrentJob-source-channel-type (ISO DPA extension) This attribute specifies the type of channel that is receiving the job from the input device. See XCMI Printer Exte…
1.3.6.1.4.1.253.8.59.6.1.1.8ColumnxcmJobSubmittedLocaleIndexread-onlycurrentJob-submitted-locale (ISO DPA extension) This object is the locale (country, territory, and language) index into the xcmGenLocalizationTable specifying the loc…
1.3.6.1.4.1.253.8.59.6.1.1.9ColumnxcmJobCurrentStateread-onlycurrentISO DPA: Current-job-state This attribute identifies the current state of the job (pending, processing, held, etc.) Print clients and DP-Servers shall be prepa…
1.3.6.1.4.1.253.8.59.6.1.1.10ColumnxcmJobStateReasonsread-onlycurrentThis object is bit-encoded, so that multiple reasons can occur at once. Each bit corresponds to an ISO DPA OID for the same reason. See textual conventions. IS…
1.3.6.1.4.1.253.8.59.6.1.1.11ColumnxcmJobXStateReasonsread-onlycurrentThis object is bit-encoded, so that multiple reasons can occur at once. Each bit corresponds to a Xerox extension OID for the same reason. See textual conventi…
1.3.6.1.4.1.253.8.59.6.1.1.12ColumnxcmJobX2StateReasonsread-onlycurrentThis object is bit-encoded, so that multiple reasons can occur at once. Each bit corresponds to a second set of 31 Xerox extension OIDs for the same reason. Se…
1.3.6.1.4.1.253.8.59.7NodexcmDevicesAssigned
1.3.6.1.4.1.253.8.59.7.1TablexcmDevicesAssignedTablenot-accessiblecurrentThis table contains the hrDeviceIndex values and states of the device(s) to which this job has been assigned, if the job has been assigned to a physical device…
1.3.6.1.4.1.253.8.59.7.1.1RowxcmDevicesAssignedEntrynot-accessiblecurrentEntries may exist in the table for each device index whose device type is 'printer', 'scanner', etc. and for each job. See Host Resources MIB and the XCMI Host…
1.3.6.1.4.1.253.8.59.7.1.1.1ColumnxcmDevicesAssignedHrDeviceIndexnot-accessiblecurrentThe hrDeviceIndex of one of the [physical] devices (printers, scanners, FAX, etc. to which the job has been assigned. For devices and systems that ensure that …
1.3.6.1.4.1.253.8.59.7.1.1.2ColumnxcmDeviceStateOfDevicesAssignedread-onlycurrentFor the MIB, the object applies to scanners, Faxes, etc., as well as printers. For job services that are purely software or that have software document transfo…
1.3.6.1.4.1.253.8.59.7.1.1.3ColumnxcmJobIdentifierDownstreamread-onlycurrentUniquely identifies the job(s) on the immediately downstream server or device as generated by that server or device that this system has submitted in order to …
1.3.6.1.4.1.253.8.59.8NodexcmClientIdMap
1.3.6.1.4.1.253.8.59.8.1TablexcmClientIdMapTablenot-accessiblecurrentA table that maps 1) job identifiers generated by the client that submitted the job to 2) job identifiers generated by the server that accepted the job.
1.3.6.1.4.1.253.8.59.8.1.1RowxcmClientIdMapEntrynot-accessiblecurrentEntries exist in this table for each device entry in the Host Resources MIB device table whose type is 'printer', 'scanner', 'fax', etc. Such a device may repr…
1.3.6.1.4.1.253.8.59.8.1.1.2ColumnxcmClientIdMapHrDeviceIndexread-onlycurrentThe device index from the Host Resources MIB, so that the client can determine to which (logical or physical) device this job has been submitted.
1.3.6.1.4.1.253.8.59.10NodexcmJobGenExt
1.3.6.1.4.1.253.8.59.10.1TablexcmJobGenExtTablenot-accessiblecurrentA table of general job information per (logical or physical) device that is independent of the type of device and that does not require a spooling implementati…
1.3.6.1.4.1.253.8.59.10.1.1RowxcmJobGenExtEntrynot-accessiblecurrentAn entry exists in this table for each job in the device, no matter what the state of the job is. Each device is represented as a separate device entry in the …
1.3.6.1.4.1.253.8.59.10.1.1.1ColumnxcmJobOriginatorread-onlycurrentISO DPA: Job-originator This attribute supplies the name of the human or programmatic originator of the print-job. If this attribute is not specified, no value…
1.3.6.1.4.1.253.8.59.10.1.1.2ColumnxcmJobSubmittingApplicationread-onlycurrentISO DPA: (ISO DPA extension) This attribute supplies the name of the programmatic originator of the print-job, i.e., name of the program that submitted the job…
1.3.6.1.4.1.253.8.59.10.1.1.3ColumnxcmJobCommentread-onlycurrentISO DPA: Job-comment This attribute supplies an arbitrary human-readable text string associated with the print-job. This attribute is intended for enabling a u…
1.3.6.1.4.1.253.8.59.10.1.1.4ColumnxcmJobCopiesread-onlycurrentFor the MIB: this object is generalized so that it applies to scanning as well as printing. ISO DPA: job-copies (an element of results-profile attribute) Total…
1.3.6.1.4.1.253.8.59.10.1.1.5ColumnxcmJobCopiesCompletedread-onlycurrentFor the MIB: this object is generalized so that it applies to scanning as well as printing. ISO DPA: Job-copies-completed This attribute indicates the number o…
1.3.6.1.4.1.253.8.59.10.1.1.6ColumnxcmJobOutputBinIndexread-onlycurrentISO DPA: output-bin Special MIB definition: specifies the index of the output subunit table for the job. NOTE - ISO DPA allows the output-bin to be specified d…
1.3.6.1.4.1.253.8.59.10.1.1.7ColumnxcmJobServiceNameRequestedread-onlycurrentSpecifies the job service name instance on which the job is to be processed as specified by the job service requester when the job was submitted. NOTE: this ob…
1.3.6.1.4.1.253.8.59.10.1.1.8ColumnxcmJobPreviousStateread-onlycurrentThis object permits the management application to display the previous job state to the user without having to monitor all job state changes. For example, when…
1.3.6.1.4.1.253.8.59.10.1.1.9ColumnxcmJobEstimatedCompletionTimeread-onlycurrentJob Monitoring MIB: If the estimated completion time is unknown, the agent should return the DEFVAL. This object is a 'best efforts' object, so any estimate ba…
1.3.6.1.4.1.253.8.59.10.1.1.10ColumnxcmJobSubmissionTimeread-onlycurrentISO DPA: Submission-time This attribute indicates the time at which the latest Print request for this job was accepted by the server. An implementation that ca…
1.3.6.1.4.1.253.8.59.10.1.1.11ColumnxcmJobPagesCompletedread-onlycurrentFor the MIB: this object is generalized so that it applies to scanning as well as printing. ISO DPA: Pages-completed This attribute indicates the number of pag…
1.3.6.1.4.1.253.8.59.10.1.1.12ColumnxcmJobOctetsCompletedHighread-onlycurrentFor the Job Monitoring MIB: two objects are used to represent a full 62-bit value. The sign bit of each half is not used. This object is generalized for use wi…
1.3.6.1.4.1.253.8.59.10.1.1.13ColumnxcmJobOctetsCompletedLowread-onlycurrentISO DPA: Octets-completed [low 31 bits] See explanation of xcmJobOctetsCompletedHigh.
1.3.6.1.4.1.253.8.59.10.1.1.14ColumnxcmJobErrorCountread-onlycurrentISO DPA: Error-count This attribute provides the number of error events occurring while processing the job.
1.3.6.1.4.1.253.8.59.10.1.1.15ColumnxcmJobWarningCountread-onlycurrentISO DPA: Warning-count This attribute provides the number of warning events occurring while processing the job.
1.3.6.1.4.1.253.8.59.10.1.1.16ColumnxcmJobProcessingTimeread-onlycurrentISO DPA: Processing-time This attribute indicates how long an individual job has been processing [in seconds].
1.3.6.1.4.1.253.8.59.10.1.1.17ColumnxcmJobNumberOfDocumentsread-onlycurrentISO DPA: Number-of-documents This attribute indicates the number of documents in the job. The number indicates how many Print operations that specified a docum…
1.3.6.1.4.1.253.8.59.10.1.1.18ColumnxcmJobAuthorizationUserNameread-onlycurrentThe user's name for authorization purposes. The value of xcmJobAuthorizationUserName may be the same or may be different than the value of the xcmJobAccounting…
1.3.6.1.4.1.253.8.59.12NodexcmDocGenBasic
1.3.6.1.4.1.253.8.59.12.1TablexcmDocGenBasicTablenot-accessiblecurrentA table of general mandatory document information that is per document which in turn is per job and which in turn is per (logical or physical) device and is in…
1.3.6.1.4.1.253.8.59.12.1.1RowxcmDocGenBasicEntrynot-accessiblecurrentAn entry exists in this table for each document in each job, no matter what the state of the job is. Each printer is represented as a separate device entry in …
1.3.6.1.4.1.253.8.59.12.1.1.1ColumnxcmDocSequenceNumberread-onlycurrentFor the MIB, a row shall not exist in this table if the job does not (yet) have any documents. A 32-bit index is required, since the ISO DPA has a 2**31-1 maxi…
1.3.6.1.4.1.253.8.59.12.1.1.2ColumnxcmDocNameread-onlycurrentFor the MIB, the single xcmDocName object is both the document name for scan-to-file and the document name for file-to-print. ISO DPA: Document-name This attri…
1.3.6.1.4.1.253.8.59.12.1.1.3ColumnxcmDocFileNameread-onlycurrentFor the MIB, the single xcmDocFileName object is both the document file name for scan-to-file and the document file name for file-to-print. If this attribute i…
1.3.6.1.4.1.253.8.59.12.1.1.4ColumnxcmDocFileNameTyperead-onlycurrentThe type of file name syntax from which a document is obtained for an output job, such as print, or for which a document is produced for an input job, such as …
1.3.6.1.4.1.253.8.59.12.1.1.5ColumnxcmDocTyperead-onlycurrentISO DPA: Document-type This attribute indicates that the document being passed by the current Print abstract-operation is either a printable document, a font, …
1.3.6.1.4.1.253.8.59.12.1.1.6ColumnxcmDocFormatread-onlycurrentThe interpreter language family enum value registered by IANA is used according to the Printer MIB (RFC 1759). See prtInterpreterLangFamily. For the Job Monito…
1.3.6.1.4.1.253.8.59.12.1.1.7ColumnxcmDocFormatVariantsread-onlycurrentFor scan-to-file jobs, the xcmDocFormatVariants object specifies the document format variant desired as a result of the scan. ISO DPA: Document-format-variants…
1.3.6.1.4.1.253.8.59.12.1.1.8ColumnxcmDocFormatVersionread-onlycurrentFor scan-to-file jobs, the xcmDocFormatVersion object specifies the document format version desired as a result of the scan. ISO DPA: Document-format-version T…
1.3.6.1.4.1.253.8.59.12.1.1.9ColumnxcmDocOctetCountread-onlycurrentFor the MIB, the value of the xcmDocOctetCount is used for both scan-to-file and file-to-print jobs. In the case of scan-to-file jobs, the value starts at 0 an…
1.3.6.1.4.1.253.8.59.12.1.1.10ColumnxcmDocStateread-onlycurrentFor the MIB, if the document is being scanned and printed in the same simple job, the xcmDocState object represents the state of the document being printed, si…
1.3.6.1.4.1.253.8.59.13NodexcmDocPrintExt
1.3.6.1.4.1.253.8.59.13.1TablexcmDocPrintExtTablenot-accessiblecurrentA table of print-centric document information which is per document which in turn is per job and which in turn is per (logical or physical) printer. Document i…
1.3.6.1.4.1.253.8.59.13.1.1RowxcmDocPrintExtEntrynot-accessiblecurrentAn entry exists in this table for each job in the device, no matter what the state of the job is. Each printer is represented as a separate device entry in the…
1.3.6.1.4.1.253.8.59.13.1.1.1ColumnxcmDocPrintDefaultMediumNameread-onlycurrentThe value of this object is the name of the medium that is the default medium for this document. A null string indicates that neither the submitting client, no…
1.3.6.1.4.1.253.8.59.13.1.1.2ColumnxcmDocPrintDefaultInputIndexread-onlycurrentThe value of this object is the index of the input sub-unit in the prtInputTable in the printer MIB that is the default input tray for this document. An index …
1.3.6.1.4.1.253.8.59.13.1.1.3ColumnxcmDocPrintFinishingread-onlycurrentSpecifies finishing to be performed on the document. NOTE: This attribute that is supplied by the job service requester is localizable by the job service provi…
1.3.6.1.4.1.253.8.59.13.1.1.4ColumnxcmDocPrintOutputMethodread-onlycurrentThis object is bit coded, so that multiple document output requests may be made for the document. Each bit corresponds to one of the ISO DPA output OIDs. See X…
1.3.6.1.4.1.253.8.59.13.1.1.5ColumnxcmDocPrintNumberUpread-onlycurrentFor the MIB: this object is specified as a text string which can be a number, e.g., '2' meaning the number of logical pages per side, or a name, e.g., 'simple-…
1.3.6.1.4.1.253.8.59.13.1.1.6ColumnxcmDocPrintSidesread-onlycurrentNOTE - The xcmDocPrintSides attribute is for print jobs. A scanner-specific object, xcmDocScanSides is needed to be added when scanning is supported, so that i…
1.3.6.1.4.1.253.8.59.13.1.1.7ColumnxcmDocPrintCopyCountread-onlycurrentISO DPA: Copy-count This attribute specifies the number of copies of the documents, or of the selected pages of the document, to be printed. A value of 1 for c…
1.3.6.1.4.1.253.8.59.13.1.1.8ColumnxcmDocPrintCopiesCompletedread-onlycurrentFor the MIB: on job recovery after power failure or a crash, the value of xcmDocPrintCopiesCompleted may be set to a lower value which would normally violate t…
1.3.6.1.4.1.253.8.59.14NodexcmJobGenSpoolingBasic
1.3.6.1.4.1.253.8.59.14.1TablexcmJobGenSpoolingBasicTablenot-accessiblecurrentA table of general job information per (logical or physical) device that is independent of the type of device (printer, scanner, fax, ...) but does require spo…
1.3.6.1.4.1.253.8.59.14.1.1RowxcmJobGenSpoolingBasicEntrynot-accessiblecurrentAn entry exists in this table for each job in the device, no matter what the state of the job is. Each device is represented as a separate device entry in the …
1.3.6.1.4.1.253.8.59.14.1.1.1ColumnxcmJobNumberOfJobResultSetsread-onlycurrent
1.3.6.1.4.1.253.8.59.14.1.1.2ColumnxcmJobPriorityread-onlycurrentFor the MIB: A value of 0 means that the priority was not specified by the job service requester and the system did not specify a default value. ISO DPA: Job-p…
1.3.6.1.4.1.253.8.59.14.1.1.3ColumnxcmJobTotalOctetsHighread-onlycurrentFor the Job Monitoring MIB: two objects are used to represent a full 62-bit value. The sign bit of each half is not used. This object is generalized for use wi…
1.3.6.1.4.1.253.8.59.14.1.1.4ColumnxcmJobTotalOctetsLowread-onlycurrentISO DPA: Total-job-octets [low 31 bits] This attribute indicates the size of the job in octets, including document and job copies. See xcmJobTotalOctetsHigh fo…
1.3.6.1.4.1.253.8.59.14.1.1.5ColumnxcmJobInterveningJobsread-onlycurrentThe number of jobs that are expected to complete before this job is completed according to the implementation's queuing and processing algorithm if no other jo…
1.3.6.1.4.1.253.8.59.15NodexcmJobGenSpoolingExt
1.3.6.1.4.1.253.8.59.15.1TablexcmJobGenSpoolingExtTablenot-accessiblecurrentA table of general extended job information per device that is independent of the type of device but that does require a spooling implementation. Job informati…
1.3.6.1.4.1.253.8.59.15.1.1RowxcmJobGenSpoolingExtEntrynot-accessiblecurrentAn entry exists in this table for each job in the (logical) device, no matter what the state of the job is. Each device is represented as a separate device ent…
1.3.6.1.4.1.253.8.59.15.1.1.1ColumnxcmJobProcessAfterread-onlycurrentSpecifies the calendar date and time of day after which the server is to process the job on the specified device. The server shall hold the job in the held sta…
1.3.6.1.4.1.253.8.59.15.1.1.3ColumnxcmJobDeadlineTimeread-onlycurrentISO DPA: job-deadline-time This attribute specifies the calendar date and time of day by which the user desires the print-job to be completed. This attribute i…
1.3.6.1.4.1.253.8.59.15.1.1.4ColumnxcmJobDiscardTimeread-onlycurrentISO DPA: job-discard-time This attribute specifies the calendar date and time of day at which the print-job should be discarded, whether or not the job has pri…
1.3.6.1.4.1.253.8.59.15.1.1.5ColumnxcmJobRetentionPeriodread-onlycurrentISO DPA: job-retention-period This attribute specifies the minimum period [in seconds] of time following the completion of job processing that the server shall…
1.3.6.1.4.1.253.8.59.15.1.1.6ColumnxcmJobMessageToOperatorread-onlycurrentISO DPA: job-message-to-operator This attribute carries a message from the user to the operator to indicate something about the processing of this print-job. T…
1.3.6.1.4.1.253.8.59.15.1.1.7ColumnxcmJobMessageFromOperatorread-onlycurrentXerox extension to ISO DPA: job-message-from-operator This attribute carries a message from the operator to the user to indicate something about the processing…
1.3.6.1.4.1.253.8.59.15.1.1.8ColumnxcmJobMessageFromAdministratorread-onlycurrentISO DPA: Job-message-from-administrator This attribute provides a message from an operator, system administrator or 'intelligent' process to indicate to the us…
1.3.6.1.4.1.253.8.59.15.1.1.9ColumnxcmJobPageCountread-onlycurrentISO DPA: Job-page-count This attribute contains the number of source pages in the job that the server expects to image. The server shall compute this value by …
1.3.6.1.4.1.253.8.59.16NodexcmJobGenAccountingBasic
1.3.6.1.4.1.253.8.59.16.1TablexcmJobGenAccountingBasicTablenot-accessiblecurrentA table of general job accounting information per (logical if spooling or physical if not spooling) device that is independent of the type of device (printer, …
1.3.6.1.4.1.253.8.59.16.1.1RowxcmJobGenAccountingBasicEntrynot-accessiblecurrentAn entry exists in this table for each job in the device, no matter what the state of the job is. Each device is represented as a separate device entry in the …
1.3.6.1.4.1.253.8.59.16.1.1.1ColumnxcmJobAccountingBasicRowStatusread-writecurrentManages the status of this conceptual row in the xcmJobGenAccountingBasicTable. When an accounting program has copied the data from this row into an accounting…
1.3.6.1.4.1.253.8.59.16.1.1.2ColumnxcmJobAccountingUserNameread-onlycurrentThis attribute specifies the name of the user for accounting purposes. See xcmJobOriginator, xcmJobOwner, and xcmJobAuthorizationUserName for additional user n…
1.3.6.1.4.1.253.8.59.16.1.1.3ColumnxcmJobAccountingInformationread-onlycurrentThis object is intended as an accounting identifier, so that a user can indicate to which account this job should be charged. A user can have any number of acc…
1.3.6.1.4.1.253.8.59.16.1.1.4ColumnxcmJobStartedProcessingTimeread-onlycurrentThe time at which the job started to be processed by the intended device (printed, scanned, faxed, etc.). NOTE: For use with this MIB, this attribute has been …
1.3.6.1.4.1.253.8.59.16.1.1.5ColumnxcmJobImpressionsCompletedread-onlycurrentIf no impressions are completed, this value shall remain 0. ISO DPA: Impressions-completed This attribute indicates the number of impressions that the printer …
1.3.6.1.4.1.253.8.59.16.1.1.6ColumnxcmJobMediaSheetsCompletedread-onlycurrentIf no media sheets are completed, this value shall remain 0. ISO DPA: Media-sheets-completed This attribute indicates the number of sheets of media that the pr…
1.3.6.1.4.1.253.8.59.16.1.1.7ColumnxcmJobCompletionTimeread-onlycurrentA conforming implementation shall return an actual date and time, rather than the DEFVAL, unless the implementation cannot tell time. ISO DPA: Completion-time …
1.3.6.1.4.1.253.8.59.16.1.1.8ColumnxcmJobWorkUnitTyperead-onlycurrentXerox extension This attribute indicates the type of work that is being accounted for. It shall be different from pages, sheets, or impressions, which already …
1.3.6.1.4.1.253.8.59.16.1.1.9ColumnxcmJobUnitsOfWorkCompletedread-onlycurrentXerox extension: The number of work units completed. See xcmJobWorkUnitType to determine what is being counted.
1.3.6.1.4.1.253.8.59.17NodexcmMediaConsumed
1.3.6.1.4.1.253.8.59.17.1TablexcmMediaConsumedTablenot-accessiblecurrentThis table contains pairs of media indexes and the number of sheets of that media consumed by this job.
1.3.6.1.4.1.253.8.59.17.1.1RowxcmMediaConsumedEntrynot-accessiblecurrentEntries may exist in the table for each device index in the Host Resource MIB whose device type is `printer', 'fax', etc., and for each job.
1.3.6.1.4.1.253.8.59.17.1.1.1ColumnxcmMediaConsumedIndexnot-accessiblecurrentA unique value used by the device to identify this medium entry in this job. For devices and systems that ensure that jobs are not lost across crashes and powe…
1.3.6.1.4.1.253.8.59.17.1.1.2ColumnxcmMediaConsumedRowStatusread-writecurrentManages the status of this conceptual row in the xcmMediaConsumedTable. When an accounting program has copied the data from this row into an accounting system,…
1.3.6.1.4.1.253.8.59.17.1.1.3ColumnxcmMediaConsumedTyperead-onlycurrentThis attribute indicates the medium type that has been consumed by the device(s) for this job, e.g. stationery, envelope, transparency, etc.
1.3.6.1.4.1.253.8.59.17.1.1.4ColumnxcmMediaConsumedNameread-onlycurrentThis attribute indicates the name of the medium that has been consumed by the device(s) for this job, e.g. letter-white, iso-a4-white, iso-a4-blanc, monarch-en…
1.3.6.1.4.1.253.8.59.17.1.1.5ColumnxcmMediaConsumedSheetCountread-onlycurrentThis attribute indicates the number of sheets of the medium that have been consumed by the device(s) for this job.
1.3.6.1.4.1.253.8.59.18NodexcmColorImpsConsumed
1.3.6.1.4.1.253.8.59.18.1TablexcmColorImpsConsumedTablenot-accessiblecurrentThis table contains pairs of colorant indexes and the number of impressions of that colorant consumed by this job.
1.3.6.1.4.1.253.8.59.18.1.1RowxcmColorImpsConsumedEntrynot-accessiblecurrentEntries may exist in the table for each device index whose device type is 'printer', 'fax', etc. and for each job.
1.3.6.1.4.1.253.8.59.18.1.1.1ColumnxcmColorImpsConsumedIndexnot-accessiblecurrentA unique value used by the printer to identify this colorant entry for this job. For devices and systems that ensure that jobs are not lost across crashes and …
1.3.6.1.4.1.253.8.59.18.1.1.2ColumnxcmColorImpsConsumedRowStatusread-writecurrentManages the status of this conceptual row in the xcmColorImpsConsumedTable. When an accounting program has copied the data from this row into an accounting sys…
1.3.6.1.4.1.253.8.59.18.1.1.3ColumnxcmColorImpsConsumedTypeIndexread-onlycurrentThis attribute indicates one of the colorant type (index into the prtColorantsTable in the Printer MIB) that have been consumed by the printer(s) for this prin…
1.3.6.1.4.1.253.8.59.18.1.1.4ColumnxcmColorImpsConsumedCountread-onlycurrentThis attribute indicates the number of impressions that have been consumed by the printer(s) for this print job and this colorant. For implementations that mak…
1.3.6.1.4.1.253.8.59.19NodexcmJobAlert
1.3.6.1.4.1.253.8.59.19.4IdentityxcmJobV1AlertNewcurrentThe value of the enterprise-specific OID in an SNMPv1 trap sent whenever the state of a job changes.
1.3.6.1.4.1.253.8.59.19.4.0NodexcmJobV2AlertPrefixNew
1.3.6.1.4.1.253.8.59.19.4.0.1NotificationxcmJobV2AlertNewcurrentThis trap is sent whenever the state of a job changes. The 'state of a job' is comprised by the aggregate values of the xcmJobCurrentState, xcmJobPriority, xcm…
1.3.6.1.4.1.253.8.59.20NodexcmDocAlert
1.3.6.1.4.1.253.8.59.20.4IdentityxcmDocV1AlertNewcurrentThe value of the enterprise-specific OID in an SNMPv1 trap sent whenever the state of a document changes.
1.3.6.1.4.1.253.8.59.20.4.0NodexcmDocV2AlertPrefixNew
1.3.6.1.4.1.253.8.59.20.4.0.1NotificationxcmDocV2AlertNewcurrentThis trap is sent whenever the state of one of the documents in a job changes. The state of a single document is represented in the xcmDocGenBasicTable column:…
1.3.6.1.4.1.253.8.59.21NodexcmJobImpsByMediumSize
1.3.6.1.4.1.253.8.59.21.1TablexcmJobImpsByMediumSizeTablenot-accessiblecurrentThis table contains tuples of medium size, count-type, and the number of impressions counted by count-type on that medium consumed by this job.
1.3.6.1.4.1.253.8.59.21.1.1RowxcmJobImpsByMediumSizeEntrynot-accessiblecurrentThis entry has one tuple of medium size, count-type, and the number of impressions counted by count-type on that medium consumed by this job.
1.3.6.1.4.1.253.8.59.21.1.1.1ColumnxcmJobImpsByMediumSizeIndexnot-accessiblecurrentA unique value used by the device to identify this impressions-by-medium-size entry in this job. For devices and systems that ensure that jobs are not lost acr…
1.3.6.1.4.1.253.8.59.21.1.1.2ColumnxcmJobImpsByMediumSizeRowStatusread-writecurrentManages the status of this conceptual row in the xcmJobImpsByMediumSizeTable. When an accounting program has copied the data from this row into an accounting s…
1.3.6.1.4.1.253.8.59.21.1.1.3ColumnxcmJobImpsByMediumSizeMediumSizeread-onlycurrentThis attribute indicates the medium size that has been produced by the device(s) for this job, e.g. naLetter(1000), isoA4(1024), jisB4(1084), etc.
1.3.6.1.4.1.253.8.59.21.1.1.4ColumnxcmJobImpsByMediumSizeCountTyperead-onlycurrentThis attribute indicates the count-type that is how to count impressions produced by the device(s) for this job, e.g. blackAndWhiteCount, highlightColorCount, …
1.3.6.1.4.1.253.8.59.21.1.1.5ColumnxcmJobImpsByMediumSizeCountread-onlycurrentThis attribute indicates the number of impressions by medium size, count-type, and quality-type for the job, which are specified respectively by xcmJobImpsByMe…
1.3.6.1.4.1.253.8.59.21.1.1.6ColumnxcmJobImpsByMediumSizeCountQualityread-onlycurrentThis attribute indicates the quality-type used for counting impressions produced by the device(s) for this job, e.g., draft, normal, high, etc.