MIB Viewer

XEROX-PRINTER-EXT-MIB

211 objects
Version: 6.006.pub Xerox XCMI Extension to IETF Printer MIB Module. This Module provides extension to the IETF Printer MIB. Copyright (C) 1997-2013 Xerox Corporation. All Rights Reserved.
Imported Objects
HOST-RESOURCES-MIB2580 hrDeviceIndex
Printer-MIB-- prtLocalizationIndex PresentOnOff prtChannelEntry prtConsoleLocalization prtGeneralEntry prtInputEntry prtInterpreterEntry prtInterpreterIndex prtLocalizationCharacterSet prtLocalizationCountry prtLocalizationLanguage prtOutputEntry
SNMPv2-CONF2579 MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE
SNMPv2-TC2578 DisplayString RowStatus TruthValue
XEROX-COMMON-MIB-- Successor to RFC 1759 xeroxCommonMIB
XEROX-GENERAL-TCCardinal32 Ordinal32 XcmFixedLocaleDisplayString XcmGenRowPersistence
XEROX-PRINTER-EXT-TC-- XcmPrtAuxSheetContent XcmPrtAuxSheetType XcmPrtGeneralMonoPrintOpt XcmPrtGroupSupport XcmPrtIETFPrintMIBGroupSupport XcmPrtInputTraysConfiguration XcmPrtMediaTypeErrorPolicy XcmPrtMediumClassType XcmPrtMediumSize XcmPrtOutputOffsetStackingType XcmPrtOutputPunchPosition XcmPrtOutputStaplePosition XcmPrtPageSizeErrorPolicy XcmPrtPCLFontSource XcmPrtPlex XcmPrtPrintQuality XcmPrtPrintScreen XcmPrtTraySwitch
OIDNameAccessStatusDescription
1.3.6.1.4.1.253.8.55IdentityxcmPrintMIBVersion: 6.006.pub Xerox XCMI Extension to IETF Printer MIB Module. This Module provides extension to the IETF Printer MIB. Copyright (C) 1997-2013 Xerox Corpo…
1.3.6.1.4.1.253.8.55.1NodexcmPrtBase
1.3.6.1.4.1.253.8.55.1.2TablexcmPrtBaseTablenot-accessiblecurrentA table of general counters and information for ease of use of the XCMI Extension to IETF Printer MIB Module and the IETF Printer MIB on this host system. Usag…
1.3.6.1.4.1.253.8.55.1.2.1RowxcmPrtBaseEntrynot-accessiblecurrentAn entry of general counters and information for ease of use of the XCMI Extension to IETF Printer MIB Module and the IETF Printer MIB on this host system. Usa…
1.3.6.1.4.1.253.8.55.1.2.1.1ColumnxcmPrtBaseIndexnot-accessiblecurrentA unique value used by this host system to identify this conceptual row in the 'xcmPrtBaseTable'. Usage: The ONLY valid row in the 'xcmPrtBaseTable' shall ALWA…
1.3.6.1.4.1.253.8.55.1.2.1.2ColumnxcmPrtBaseRowStatusread-onlycurrentThis object is used to display status of the ONLY valid conceptual row in the 'xcmPrtBaseTable'. Usage: 'xcmPrtBaseRowStatus' is 'read-only' because the ONLY v…
1.3.6.1.4.1.253.8.55.1.2.1.3ColumnxcmPrtBaseGroupSupportread-onlycurrentThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects which are supported by this management agent implementat…
1.3.6.1.4.1.253.8.55.1.2.1.4ColumnxcmPrtBaseUpdateSupportread-onlycurrentThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects which are supported for existing row update (via SNMP Se…
1.3.6.1.4.1.253.8.55.1.2.1.5ColumnxcmPrtBaseCreateSupportread-onlycurrentThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects which are supported for dynamic row creation (via '...Ro…
1.3.6.1.4.1.253.8.55.1.2.1.6ColumnxcmPrtBaseIETFMIBGroupSupportread-onlycurrentThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects in the IETF Printer MIB which are supported by this mana…
1.3.6.1.4.1.253.8.55.1.2.1.7ColumnxcmPrtBaseIETFMIBUpdateSupportread-onlycurrentThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects in the IETF Printer MIB supported for existing row updat…
1.3.6.1.4.1.253.8.55.1.2.1.8ColumnxcmPrtBaseIETFMIBCreateSupportread-onlycurrentThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects in the IETF Printer MIB supported for dynamic row creati…
1.3.6.1.4.1.253.8.55.2NodexcmPrtMIBConformance
1.3.6.1.4.1.253.8.55.2.1CompliancexcmPrtMIBComplianceread-onlycurrentThe compliance statement for agents that implement the printer MIB extension module.
1.3.6.1.4.1.253.8.55.2.2NodexcmPrtMIBGroups
1.3.6.1.4.1.253.8.55.2.2.1GroupxcmPrtBaseGroupcurrentThe general printer group extension.
1.3.6.1.4.1.253.8.55.2.2.5GroupxcmPrtGeneralGroupcurrentThe general printer group extension.
1.3.6.1.4.1.253.8.55.2.2.6GroupxcmPrtDriverOptionsGroupcurrentThe printer driver options group extension.
1.3.6.1.4.1.253.8.55.2.2.8GroupxcmPrtInputGroupcurrentThe input group extension.
1.3.6.1.4.1.253.8.55.2.2.9GroupxcmPrtOutputGroupcurrentThe output group extension.
1.3.6.1.4.1.253.8.55.2.2.14GroupxcmPrtChannelGroupcurrentThe Channel group extension.
1.3.6.1.4.1.253.8.55.2.2.15GroupxcmPrtInterpreterGroupcurrentThe interpreter group extension.
1.3.6.1.4.1.253.8.55.2.2.50GroupxcmPrtInputAliasGroupcurrentThe Input Alias group.
1.3.6.1.4.1.253.8.55.2.2.51GroupxcmPrtOutputFinishingGroupcurrentThe Output Finishing group.
1.3.6.1.4.1.253.8.55.2.2.52GroupxcmPrtGeneralAuxSheetGroupcurrentThe General Auxiliary Sheet group.
1.3.6.1.4.1.253.8.55.2.2.55GroupxcmPrtGeneralProdSpecificGroupcurrentThe general printer product specific group.
1.3.6.1.4.1.253.8.55.2.2.60GroupxcmPrtAuxPackageGroupcurrentThe Auxiliary Package group.
1.3.6.1.4.1.253.8.55.2.2.64GroupxcmPrtChannelProdSpecificGroupcurrentThe Channel group extension for prod specific objects.
1.3.6.1.4.1.253.8.55.2.2.65GroupxcmPrtInterpProdSpecificGroupcurrentThe interpreter group extension.
1.3.6.1.4.1.253.8.55.2.2.70GroupxcmPrtInterpPCLGroupcurrentThe Interpreter PCL group.
1.3.6.1.4.1.253.8.55.2.2.71GroupxcmPrtInterpPCLProdSpecificGroupcurrentThe Interpreter PCL Product Specific group.
1.3.6.1.4.1.253.8.55.2.2.75GroupxcmPrtMediumTypeSupportedGroupcurrentThe Medium Type Supported group.
1.3.6.1.4.1.253.8.55.5NodexcmPrtGeneral
1.3.6.1.4.1.253.8.55.5.1TablexcmPrtGeneralTablenot-accessiblecurrentA table of general information per printer. This table augments the prtGeneralTable.
1.3.6.1.4.1.253.8.55.5.1.1RowxcmPrtGeneralEntrynot-accessiblecurrentAn entry exists in this table for each device entry in the hostmib device table whose type is printer.
1.3.6.1.4.1.253.8.55.5.1.1.1ColumnxcmPrtGeneralRowStatusread-createcurrentManages the status of this conceptual row in the xcmPrtGeneralTable.
1.3.6.1.4.1.253.8.55.5.1.1.2ColumnxcmPrtGeneralAuxSheetPackageread-createcurrentThis object is an index into the xcmPrtAuxPackageTable. This table is used to enable or disable printing of auxiliary sheets at the printer box level. The valu…
1.3.6.1.4.1.253.8.55.5.1.1.3ColumnxcmPrtGeneralManualFeedTimeoutread-createcurrentThe duration in seconds after which the printer shall either: (a) switch to another input subunit, if the value of prtInputNextIndex is non-zero and prtGeneral…
1.3.6.1.4.1.253.8.55.5.1.1.4ColumnxcmPrtGeneralInputAutoSwitchread-createcurrentIndicates the state of the auto input switching feature. The value notPresent indicates the feature is not currently supported. Exact behavior of this feature …
1.3.6.1.4.1.253.8.55.5.1.1.5ColumnxcmPrtGeneralOutputAutoSwitchread-createcurrentIndicates the state of the auto output tray switching feature. The value notPresent indicates the feature is not currently supported. Exact behavior of this fe…
1.3.6.1.4.1.253.8.55.5.1.1.6ColumnxcmPrtGeneralMediumClassDefaultread-createcurrentThis object sets the default medium size class for the printer. This object sets the medium size for printer management functions such as printing the configur…
1.3.6.1.4.1.253.8.55.5.1.1.7ColumnxcmPrtGeneralDarknessLevelsread-createcurrentThis value indicates the maximum number of darkness levels supported by this printer. The level settings range from 1 to xcmPrtGeneralDarknessLevels where 1 re…
1.3.6.1.4.1.253.8.55.5.1.1.8ColumnxcmPrtGeneralDarknessLevelNormread-createcurrentThe normal setting for the darkness printing object. The value 0 means unspecified.
1.3.6.1.4.1.253.8.55.5.1.1.9ColumnxcmPrtGeneralDarknessLevelDfltread-createcurrentThe default setting for the density printing option. The value (-2) indicates unknown. The value (-4) indicates the auto setting.
1.3.6.1.4.1.253.8.55.5.1.1.10ColumnxcmPrtGeneralHexDumpEnableread-createcurrentThis object controls whether the printer is in a special diagnostic mode wherein all received print data is printed in hexadecimal format. Whether a reset or p…
1.3.6.1.4.1.253.8.55.5.1.1.11ColumnxcmPrtGeneralStartupPageread-createcurrentUsed to enable or disable printing a startup page. If enabled, a startup page will be printed shortly after power-up, when the device is ready. Typical startup…
1.3.6.1.4.1.253.8.55.5.1.1.12ColumnxcmPrtGeneralBannerPageread-createcurrentUsed to enable or disable printing banner pages at the beginning of jobs. This is a master switch which applies to all jobs, regardless of interpreter. Usage: …
1.3.6.1.4.1.253.8.55.5.1.1.13ColumnxcmPrtGeneralTonerLowStopread-createcurrentIndicates the action taken when a low toner condition exists. 'on' indicates that the printer will stop printing when then toner is low 'off' indicates that pr…
1.3.6.1.4.1.253.8.55.5.1.1.14ColumnxcmPrtGeneralEndBannerPageread-createcurrentUsed to enable or disable printing banner pages at the end of jobs. This is a master switch which applies to all jobs, regardless of interpreter.
1.3.6.1.4.1.253.8.55.5.1.1.15ColumnxcmPrtGeneralTrayLowWarningread-createcurrentIndicates the action taken when a input tray paper condition 'on' indicates that the printer will report the warning over the user interfaces: Control Panel, C…
1.3.6.1.4.1.253.8.55.5.1.1.50ColumnxcmPrtGeneralScanlineCompactionread-createcurrentThis object enables a printing mode wherein the printer compresses selected scanlines of raster image data as they are received and holds them in compressed fo…
1.3.6.1.4.1.253.8.55.5.1.1.51ColumnxcmPrtGeneralMonoPrintOptimizationread-createcurrentThis object enables a printing mode wherein the printer can be set to either one of two modes overall. Mode 1 is Optimized for Speed, Mode 2 is Optimized for E…
1.3.6.1.4.1.253.8.55.5.1.1.70ColumnxcmPrtGeneralInstalledFeederread-onlycurrentThis object uniquely specifies the currently installed Feeder hardware. Its purpose is to allow clients to determine via a single MIB object the number and typ…
1.3.6.1.4.1.253.8.55.5.1.1.71ColumnxcmPrtGeneralInstalledFinisherread-onlycurrentThis object uniquely specifies the currently installed Finisher hardware. Its purpose is to allow clients to determine via a single MIB object the number and t…
1.3.6.1.4.1.253.8.55.5.1.1.72ColumnxcmPrtGeneralInstalledAnalogFaxread-onlycurrentThis object uniquely specifies the currently installed analog fax card. Its purpose is to allow clients to determine via a single MIB object whether an analog …
1.3.6.1.4.1.253.8.55.5.2IdentityxcmPrtGeneralConsoleLocalizationV1EventOIDcurrentThe value of the enterprise-specific OID in an SNMPv1 trap sent whenever 'prtConsoleLocalization' in the industry standard printer mib is updated. See SNMPv2 t…
1.3.6.1.4.1.253.8.55.5.2.0NodexcmPrtGeneralConsoleLocalizationV2EventPrefix
1.3.6.1.4.1.253.8.55.5.2.0.1NotificationxcmPrtGeneralConsoleLocalizationV2EventcurrentThis trap is sent when the value for prtConsoleLocalization in the industry standard printer MIB gets updated. Note: The variable-bindings of this trap have be…
1.3.6.1.4.1.253.8.55.6NodexcmPrtDriverOptions
1.3.6.1.4.1.253.8.55.6.1ScalarxcmPrtDrvrHwdOptStaplerread-onlycurrentObject that indicates if a Stapler Unit is installed within the print device.
1.3.6.1.4.1.253.8.55.6.2ScalarxcmPrtDrvrHwdOptDuplexUnitread-onlycurrentObject that indicates if a Duplex Unit is installed within the print device.
1.3.6.1.4.1.253.8.55.6.3ScalarxcmPrtDrvrHwdOptPhaserBookletMakerread-onlycurrentObject that indicates if a Booklet Maker Module is installed within the Phaser print device.
1.3.6.1.4.1.253.8.55.6.4ScalarxcmPrtDrvrHwdOptEnvelopeTrayread-onlycurrentObject that indicates if an Envelope Tray is installed within the print device.
1.3.6.1.4.1.253.8.55.6.5ScalarxcmPrtDrvrHwdOptCoilPunchUnitread-onlycurrentObject that indicates if a Coil Punch Unit is installed within the print device.
1.3.6.1.4.1.253.8.55.6.6ScalarxcmPrtDrvrHwdOptFinisherDFAread-onlycurrentObject that indicates the type of Finisher DFA that is installed within the print device.
1.3.6.1.4.1.253.8.55.6.7ScalarxcmPrtDrvrHwdOptHighCapacityFeederread-onlycurrentObject that indicates the type of High Capacity Feeder that is installed within the print device.
1.3.6.1.4.1.253.8.55.6.8ScalarxcmPrtDriverOutputDeliveryUnitread-onlycurrentObject used to indicate the type of Output Delivery Units that are installed within the print device. The contents of this object shall expose a string of vali…
1.3.6.1.4.1.253.8.55.6.9ScalarxcmPrtDrvrHwdOptHardDriveread-onlycurrentObject that indicates if a Hard Drive is installed within the print device.
1.3.6.1.4.1.253.8.55.6.10ScalarxcmPrtDrvrHwdOptHolePunchUnitread-onlycurrentObject used to indicate the type of Hole Punch Unit that is installed within the print device.
1.3.6.1.4.1.253.8.55.6.11ScalarxcmPrtDriverInputPaperTraysread-onlycurrentObject used to indicate the type of Paper Trays that are installed within the print device. The contents of this object shall expose a string of valid Paper Tr…
1.3.6.1.4.1.253.8.55.6.12ScalarxcmPrtDrvrHwdOptInserterUnitread-onlycurrentObject that indicates if an Inserter Unit is installed within the print device.
1.3.6.1.4.1.253.8.55.6.13ScalarxcmPrtDrvrHwdOptJobAccountingFdiread-onlycurrentObject that indicates if a Job Accounting FDI Unit is installedthe print device.
1.3.6.1.4.1.253.8.55.6.14ScalarxcmPrtDrvrHwdOptFaxOutread-onlycurrentObject that indicates if a Fax Out Unit is installed within the print device.
1.3.6.1.4.1.253.8.55.6.15ScalarxcmPrtDrvrHwdOptMemoryInMBsread-onlycurrentObject that indicates the size of physical memory in units of Megabytes installed within the print device. A value of zero indicates that no memory is installe…
1.3.6.1.4.1.253.8.55.6.16ScalarxcmPrtDrvrHwdOptOutputBinSideread-onlycurrentObject that indicates if a Side Output Bin is installed within the print device.
1.3.6.1.4.1.253.8.55.6.17ScalarxcmPrtDrvrHwdOptOutputBinCenterread-onlycurrentObject that indicates if a Center Output Bin is installed within the print device.
1.3.6.1.4.1.253.8.55.6.18ScalarxcmPrtDrvrHwdOptPhaserModuleread-onlycurrentObject that indentifies the configuration of the Phaser print device.
1.3.6.1.4.1.253.8.55.6.19ScalarxcmPrtDrvrHwdOptPrintEngineread-onlycurrentObject that indicates if the print device contains a single print engine or has two print engines.
1.3.6.1.4.1.253.8.55.6.20ScalarxcmPrtDrvrHwdOptSquareFoldTrimmerread-onlycurrentObject that indicates if a Square Fold Trimmer Unit is installed within the print device.
1.3.6.1.4.1.253.8.55.6.21ScalarxcmPrtDrvrHwdOptTriFoldread-onlycurrentObject that indicates if a Tri-Fold Unit is installed within the print device.
1.3.6.1.4.1.253.8.55.6.50ScalarxcmPrtDrvrFntCollationread-onlycurrentObject that indicates if the Collation function is supported by the print device.
1.3.6.1.4.1.253.8.55.6.51ScalarxcmPrtDrvrFntAsciiJobTicketread-onlycurrentObject that indicates if an ACSII Job Ticket function is supported by the print device.
1.3.6.1.4.1.253.8.55.6.52ScalarxcmPrtDrvrFntAuthenticationModeread-onlycurrentObject that indicates the type of Authentication Mode function that is supported by the print device.
1.3.6.1.4.1.253.8.55.6.53ScalarxcmPrtDrvrFntHoldForAuthenModeread-onlycurrentObject that indicates the type of Hold for Authentication Mode function that is supported by the print device.
1.3.6.1.4.1.253.8.55.6.54ScalarxcmPrtDrvrFntEnhancedImageQualityModeread-onlycurrentObject that indicates if the Enhanced Image Quality function is supported by the print device.
1.3.6.1.4.1.253.8.55.6.55ScalarxcmPrtDrvrFntProductivityPackread-onlycurrentObject that indicates if the Productivity Pack function is supported by the print device.
1.3.6.1.4.1.253.8.55.6.56ScalarxcmPrtDrvrFntJobStorageread-onlycurrentObject that indicates if the Job Storage software function is supported by the print device.
1.3.6.1.4.1.253.8.55.6.57ScalarxcmPrtDrvrFntJobAccountingSystemread-onlycurrentObject that indicates the type of Job Accounting System that is supported by the print device.
1.3.6.1.4.1.253.8.55.8NodexcmPrtInput
1.3.6.1.4.1.253.8.55.8.1TablexcmPrtInputTablenot-accessiblecurrentThis table logically augments the Printer MIB's prtInputTable.
1.3.6.1.4.1.253.8.55.8.1.1RowxcmPrtInputEntrynot-accessiblecurrentEntries may exist for each entry in the prtInputTable.
1.3.6.1.4.1.253.8.55.8.1.1.1ColumnxcmPrtInputRowStatusread-createcurrentManages the status of this conceptual row in the xcmPrtInputTable.
1.3.6.1.4.1.253.8.55.8.1.1.2ColumnxcmPrtInputNextPrtInputIndexread-createcurrentThe value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied. The value of zero indicates that auto inpu…
1.3.6.1.4.1.253.8.55.8.1.1.3ColumnxcmPrtInputUseCustomSizeread-createcurrentSpecifies how this input subunit determines the paper size to use. If the value is 'Off' this input subunit uses the paper size automatically sensed by the sub…
1.3.6.1.4.1.253.8.55.8.1.1.4ColumnxcmPrtInputCustDimFeedDirDeclread-createcurrentProvides the dimension, in the feed direction, of the media in this input subunit, when the value of xcmPrtInputUseCustomSize is set to 'On'. When xcmPrtInputU…
1.3.6.1.4.1.253.8.55.8.1.1.5ColumnxcmPrtInputCustDimXFeedDirDeclread-createcurrentProvides the dimension, in the feed direction, of the media in this input subunit, when the value of xcmPrtInputUseCustomSize is set to 'On'. When xcmPrtInputU…
1.3.6.1.4.1.253.8.55.8.1.1.6ColumnxcmPrtInputTrayPriorityread-createcurrentThe current priority of this tray. This value/mechanism is independent of xcmPrtNextPrtInputIndex and xcmPrtInputAliasGroup. Usage: The priority of this device…
1.3.6.1.4.1.253.8.55.8.2TablexcmPrtInputTrayTablenot-accessiblecurrentThis table logically augments the Printer MIB's Input Group.
1.3.6.1.4.1.253.8.55.8.2.1RowxcmPrtInputTrayEntrynot-accessiblecurrentEntries may exist for each unique hrDeviceIndex entry in the prtInputTable.
1.3.6.1.4.1.253.8.55.8.2.1.1ColumnxcmPrtInputTraysRowStatusread-createcurrentManages the status of this conceptual row in the xcmPrtInputTrayTable.
1.3.6.1.4.1.253.8.55.8.2.1.2ColumnxcmPrtInputTraysInstalledread-createcurrentThe number of printer input trays installed on this device. This is read-only on devices that are able to determine this value at The value is read-write on de…
1.3.6.1.4.1.253.8.55.8.2.1.3ColumnxcmPrtInputTraysConfigurationread-onlycurrentThis single object represents the input tray configuration for the entire machine. The value exposed by this object will be utilized by Xerox print driver soft…
1.3.6.1.4.1.253.8.55.9NodexcmPrtOutput
1.3.6.1.4.1.253.8.55.9.1TablexcmPrtOutputTablenot-accessiblecurrentThis table logically augments the prtOutputTable in the Printer MIB.
1.3.6.1.4.1.253.8.55.9.1.1RowxcmPrtOutputEntrynot-accessiblecurrentEntries may exist for each entry in the prtOutputTable.
1.3.6.1.4.1.253.8.55.9.1.1.1ColumnxcmPrtOutputRowStatusread-createcurrentManages the status of this conceptual row in the xcmPrtOutputTable.
1.3.6.1.4.1.253.8.55.9.1.1.2ColumnxcmPrtOutputNextIndexread-createcurrentThe value of prtOutputIndex corresponding to the output subunit which will be used when this output subunit is filled. A value of zero(0) indicates that auto o…
1.3.6.1.4.1.253.8.55.9.1.1.3ColumnxcmPrtOutputPasswordread-createcurrentThis object is used as the password for an Output Tray, e.g. an output mailbox. It is the value that must be entered to open the output tray.
1.3.6.1.4.1.253.8.55.9.1.1.4ColumnxcmPrtOutputOffsetStackingTyperead-createcurrentThis object further refines the type of offset stacking from that specified by the object prtOutputOffsetStacking in the Printer MIB.
1.3.6.1.4.1.253.8.55.9.1.1.5ColumnxcmPrtOutputTrayTimeoutSupportread-createcurrentDetermines whether the printer should wait before sending the printed output to another output destination when the selected or default destination is full. 'O…
1.3.6.1.4.1.253.8.55.9.1.1.6ColumnxcmPrtOutputTrayTimeoutread-createcurrentDetermines how long the printer should wait before sending the printed output to another output destination when the selected or default destination is full. A…
1.3.6.1.4.1.253.8.55.9.1.1.100ColumnxcmPrtOutputStapleread-createcurrentThis object declares whether the printer has the ability to staple multi-page documents delivered to the specified output destination, and whether this ability…
1.3.6.1.4.1.253.8.55.9.1.1.101ColumnxcmPrtOutputStaplePosSupportedread-createcurrentThis object declares the stapling positions supported.
1.3.6.1.4.1.253.8.55.9.1.1.102ColumnxcmPrtOutputStapleDefaultread-createcurrentThis object declares for the cases where the job-stream does not specify whether to staple a particular job, whether the printer should apply the default stapl…
1.3.6.1.4.1.253.8.55.9.1.1.103ColumnxcmPrtOutputStaplePosDefaultread-createcurrentThis object controls the default staple position to be used when stapling is enabled, and the job-stream does not specify whether to staple the particular job …
1.3.6.1.4.1.253.8.55.9.1.1.104ColumnxcmPrtOutputPunchread-createcurrentThis object declares whether the printer has the ability to punch holes in documents delivered to the specified output destination, and whether this ability is…
1.3.6.1.4.1.253.8.55.9.1.1.105ColumnxcmPrtOutputPunchDefaultread-createcurrentThis object declares whether the printer will punch the job when the print stream does not specify a punch requirement. 'on' indicates hole punching is support…
1.3.6.1.4.1.253.8.55.9.1.1.106ColumnxcmPrtOutputPunchPosSupportedread-createcurrentThis object declares the punch positions supported.
1.3.6.1.4.1.253.8.55.9.1.1.107ColumnxcmPrtOutputBookletFoldStapleread-createcurrentThis object declares whether the device has the ability to fold and or staple booklet documents delivered to the specifie output destination, and whether this …
1.3.6.1.4.1.253.8.55.14NodexcmPrtChannel
1.3.6.1.4.1.253.8.55.14.1TablexcmPrtChannelTablenot-accessiblecurrentThis table logically augments Printer MIB's prtChannelTable.
1.3.6.1.4.1.253.8.55.14.1.1RowxcmPrtChannelEntrynot-accessiblecurrentAn entry exists corresponding to each entry in the prtChannelTable.
1.3.6.1.4.1.253.8.55.14.1.1.1ColumnxcmPrtChannelRowStatusread-createcurrentManages the status of this conceptual row in the xcmPrtChannelTable.
1.3.6.1.4.1.253.8.55.14.1.1.2ColumnxcmPrtChannelEOJTimeoutread-createcurrentDefines the number of seconds that the channel waits before timing out. For example, this may be used for the parallel channel. The value zero means infinite o…
1.3.6.1.4.1.253.8.55.14.1.1.3ColumnxcmPrtChannelAuxSheetPackageread-createcurrentThis object is an index into the xcmPrtAuxPackageTable. This table is used to enable or disable printing of auxiliary sheets by this channel. The value zero sh…
1.3.6.1.4.1.253.8.55.14.1.1.4ColumnxcmPrtChannelSpoolingEnableread-createcurrentThis object controls spooling to a large data store such as a hard disk. When set to On, data received and waiting to be processed from any port is spooled ont…
1.3.6.1.4.1.253.8.55.14.1.1.5ColumnxcmPrtChannelLangSensingread-createcurrentThis object indicates whether the channel supports detection of the input PDL language type, and if so, whether the feature is enabled. Currently, the prtChann…
1.3.6.1.4.1.253.8.55.14.1.1.6ColumnxcmPrtChannelBinaryPostScriptread-createcurrentIf 'On' PostScript received over this channel is processed as pure binary data. If 'Off' PostScript is interpretted as ASCII or TBCP data. The value 'other' sh…
1.3.6.1.4.1.253.8.55.14.1.1.80ColumnxcmPrtChannelAutoJobEndread-createcurrentControls automatic ending of a print job that does not finish printing. When 'On', after the current print job has paused long enough to exceed the xcmPrtChann…
1.3.6.1.4.1.253.8.55.14.1.1.81ColumnxcmPrtChannelBinaryPostScriptZread-createcurrentIf 'On' PostScript received over this channel is processed as pure binary data. If 'Off' PostScript is interpretted as ASCII or TBCP data. The value 'other' sh…
1.3.6.1.4.1.253.8.55.15NodexcmPrtInterpreter
1.3.6.1.4.1.253.8.55.15.1TablexcmPrtInterpreterTablenot-accessiblecurrentThis table logically augments the Printer MIB's prtInterpreterTable.
1.3.6.1.4.1.253.8.55.15.1.1RowxcmPrtInterpreterEntrynot-accessiblecurrentAn entry exists corresponding to each entry in the prtInterpreterTable.
1.3.6.1.4.1.253.8.55.15.1.1.1ColumnxcmPrtInterpRowStatusread-createcurrentManages the status of this conceptual row in the xcmPrtInterpreterTable.
1.3.6.1.4.1.253.8.55.15.1.1.2ColumnxcmPrtInterpAuxSheetPackageread-createcurrentThis object is an index into the xcmPrtAuxPackageTable. This table is used to enable or disable printing of auxiliary sheets by this interpreter. The value zer…
1.3.6.1.4.1.253.8.55.15.1.1.3ColumnxcmPrtInterpContextSavingread-createcurrentEnables reserving memory for saving permanently downloaded fonts and macros, when the printer switches between this and another interpreter. The effect is to s…
1.3.6.1.4.1.253.8.55.15.1.1.4ColumnxcmPrtInterpEdgeEnhancementread-createcurrentSpecifies whether the printer should perform EdgeEnhancement of the image of the printed document for this interpreter. The value 'other' shall mean not specif…
1.3.6.1.4.1.253.8.55.15.1.1.5ColumnxcmPrtInterpFontIndexDefaultread-createcurrentThe value of xcmFontIndex corresponding to the xcmFontEntry which represents the default font for this Interpreter. A value of (-1) means 'other'. A value of (…
1.3.6.1.4.1.253.8.55.15.1.1.6ColumnxcmPrtInterpGrayLevelsread-createcurrentThis object describes the gray levels supported by this interpreter. This may represent gray levels within a color plane. The value zero means not specified fo…
1.3.6.1.4.1.253.8.55.15.1.1.7ColumnxcmPrtInterpGrayLevelDefaultread-createcurrentThis object controls the number of gray scales for this interpreter. The value zero means not specified for this interpreter.
1.3.6.1.4.1.253.8.55.15.1.1.8ColumnxcmPrtInterpJamRecoveryread-createcurrentThis object controls how the printer recovers from a paper jam. When set to On, the printer reprints any pages in the printer at the time of the jam, after the…
1.3.6.1.4.1.253.8.55.15.1.1.9ColumnxcmPrtInterpJobCopiesDefaultread-createcurrentThis defines the default number of job copies to be printed by this interpreter. If set incorrectly, this object may cause difficulties at customer sites. Agen…
1.3.6.1.4.1.253.8.55.15.1.1.10ColumnxcmPrtInterpLineWrapread-createcurrentThis object controls whether long lines are wrapped or truncated. If On, long lines wrap to the next line. If Off, long lines are truncated. Note the meaning o…
1.3.6.1.4.1.253.8.55.15.1.1.11ColumnxcmPrtInterpMediumSizeDefaultread-createcurrentThis object specifies the default medium size for an interpreter. It is used if no medium size is specified. For PCL, this object sets the General PJL Environm…
1.3.6.1.4.1.253.8.55.15.1.1.12ColumnxcmPrtInterpPageProtectread-createcurrentThis object enables reserving sufficient memory for printing complex pages, thus avoiding Page Too Complex errors. The amount of memory reserved is implementat…
1.3.6.1.4.1.253.8.55.15.1.1.13ColumnxcmPrtInterpPageProtectSizeread-createcurrentThis object sets the PageSize to be used by this interpreter in reserving sufficient memory for printing complex pages, thus avoiding Page Too Complex Errors. …
1.3.6.1.4.1.253.8.55.15.1.1.14ColumnxcmPrtInterpPageSizeErrorPolicyread-createcurrentControls interpreter behavior when the requested Page Size is not currently available.
1.3.6.1.4.1.253.8.55.15.1.1.15ColumnxcmPrtInterpPlexSupportedread-createcurrentThis object specifies the Plex modes supported by this interpreter. These Plex modes specify the relative orientations between consecutive pages, and capabilit…
1.3.6.1.4.1.253.8.55.15.1.1.16ColumnxcmPrtInterpPlexDefaultread-createcurrentThis object specifies the default plex for this interpreter. The device shall set no more than one bit. The value zero shall indicate not specified.
1.3.6.1.4.1.253.8.55.15.1.1.17ColumnxcmPrtInterpPrintEdgeToEdgeread-createcurrentEnables edge to edge printing for interpreters that try to enforce a coordinate system that is offset from the edge of the paper, e.g., PCL. When On, jobs are …
1.3.6.1.4.1.253.8.55.15.1.1.18ColumnxcmPrtInterpPrintQualityread-createcurrentSets the default output quality of the printed document for this interpreter. Some printers have programmatically controlled output quality.
1.3.6.1.4.1.253.8.55.15.1.1.19ColumnxcmPrtInterpPrtInputIndexDfltread-createcurrentSets the default input source for the interpreter. It is the index to the prtInputGroup. The value zero means not specified.
1.3.6.1.4.1.253.8.55.15.1.1.20ColumnxcmPrtInterpPrtOutputIndexDfltread-createcurrentThe value of the index of the default Output bin for this interpreter. If specified, this object overrides the box level object prtOutputDefaultIndex. The valu…
1.3.6.1.4.1.253.8.55.15.1.1.21ColumnxcmPrtInterpResFeedDirDefaultread-createcurrentThis object specifies for this interpreter, the default resolution in the Feed direction in 10000 units of measure specified by prtMarkerAddressabilityUnit for…
1.3.6.1.4.1.253.8.55.15.1.1.22ColumnxcmPrtInterpResXFeedDirDefaultread-createcurrentThis object specifies for this interpreter, the default resolution in the Cross Feed direction in 10000 units of measure specified by prtMarkerAddressabilityUn…
1.3.6.1.4.1.253.8.55.15.1.1.23ColumnxcmPrtInterpResIPResIndexread-createcurrentThis object shall provide an index into the xcmIPResTable. The xcmIPResTable shall be used to list available resolutions supported by this interpreter. Each ro…
1.3.6.1.4.1.253.8.55.15.1.1.24ColumnxcmPrtInterpResIPResIndexDfltread-createcurrentThis object which is a pointer into the xcmIPResTable sets the print resolution for this interpreter. The value zero means unspecified.
1.3.6.1.4.1.253.8.55.15.1.1.25ColumnxcmPrtInterpTextFormLengthread-createcurrentThis object sets the maximum number of lines per page for a text file that is being printed using this interpreter. For PCL Interpreters, this object provides …
1.3.6.1.4.1.253.8.55.15.1.1.26ColumnxcmPrtInterpTimeoutJobread-createcurrentThis object sets how long printer will wait for correct end of job from the interpreter. This setting lets you adjust how long the printer will wait to receive…
1.3.6.1.4.1.253.8.55.15.1.1.27ColumnxcmPrtInterpTimeoutPageread-createcurrentThis object sets how long printer will wait for correct end of page from the interpreter. If, for example, a print job contains a page without the correct end …
1.3.6.1.4.1.253.8.55.15.1.1.28ColumnxcmPrtInterpInputAliasIndexDfltread-createcurrentSets the default input tray alias for this interpreter. It is the xcmPrtInputAliasIndex to the xcmPrtInputAlias table. The value zero means 'not specified'.
1.3.6.1.4.1.253.8.55.15.1.1.29ColumnxcmPrtInterpTraySwitchread-createcurrentThis object declares for this interpreter the tray switching declaration mechanism used. Note: The tray switching declaration mechanisms do not specify how or …
1.3.6.1.4.1.253.8.55.15.1.1.30ColumnxcmPrtInterpMediumTypeDefaultread-createcurrentSpecifies the paper type used to print a page if no paper type is specified by the software application Typical paper types could include Plain, Preprinted, et…
1.3.6.1.4.1.253.8.55.15.1.1.31ColumnxcmPrtInterpMediaTypeErrPolicyread-createcurrentControls interpreter behavior when the requested Media Type is not currently available.
1.3.6.1.4.1.253.8.55.15.1.1.32ColumnxcmPrtInterpErrorPolicyTimeoutread-createcurrentProvides the timeout for ErrorPolicy enumerations requiring one, e.g. 'ignoreAfterTimeout' The value zero shall mean infinite or not supported.
1.3.6.1.4.1.253.8.55.15.1.1.33ColumnxcmPrtInterpLineTermread-createcurrentEnables adding a Carriage Return after every Line Feed. The value 'On' indicates that a Carriage Return will be added after every Line Feed. Usage example: Thi…
1.3.6.1.4.1.253.8.55.15.1.1.34ColumnxcmPrtInterpEnhancedResolutionread-createcurrentThis value determines whether the value of prtMarkerAddressabilityFeedDir and prtMarkerAddressabilityXFeedDir is generated directly or generated by enhancing a…
1.3.6.1.4.1.253.8.55.15.1.1.50ColumnxcmPrtInterpAutoContinueread-createcurrentThis object controls whether the printer resumes printing after a system error occurs. When set to Off, the printer does not automatically resume. Manual inter…
1.3.6.1.4.1.253.8.55.15.1.1.51ColumnxcmPrtInterpEnvFeederSizeread-createcurrentThis object informs the printer what size of envelope is currently loaded in the envelope feeder. Because the input tray feeding envelopes may not have a size …
1.3.6.1.4.1.253.8.55.15.1.1.52ColumnxcmPrtInterpManualFeedPgSizeread-createcurrentThis object sets the default medium size of the manual input tray for this interpreter.
1.3.6.1.4.1.253.8.55.15.1.1.53ColumnxcmPrtInterpOffsetStackingTyperead-createcurrentThis object further refines the type of offset stacking from that specified by the object prtOutputOffsetStacking in the Printer MIB. Printers who need to spec…
1.3.6.1.4.1.253.8.55.15.1.1.54ColumnxcmPrtInterpProcessBarcodesread-createcurrentSpecifies whether the 'extra' barcode processing within the interpreter should be used.
1.3.6.1.4.1.253.8.55.50NodexcmPrtInputAlias
1.3.6.1.4.1.253.8.55.50.1TablexcmPrtInputAliasTablenot-accessiblecurrentThis table defines one or more aliases for input sub-units defined in the Input Group.
1.3.6.1.4.1.253.8.55.50.1.1RowxcmPrtInputAliasEntrynot-accessiblecurrentOne or more entries may exist corresponding to each entry in the prtInputTable.
1.3.6.1.4.1.253.8.55.50.1.1.1ColumnxcmPrtInputAliasIndexnot-accessiblecurrentA unique value used to identify this row in the xcmPrtInputAliasTable.
1.3.6.1.4.1.253.8.55.50.1.1.2ColumnxcmPrtInputAliasRowStatusread-createcurrentManages the status of this conceptual row in the xcmPrtInputAliasTable.
1.3.6.1.4.1.253.8.55.50.1.1.3ColumnxcmPrtInputAliasNameread-createcurrentDefines an alternate name for the input source. This is in addition to the prtInputName from the Input Group. Typical usage is to map an interpreter specific n…
1.3.6.1.4.1.253.8.55.50.1.1.4ColumnxcmPrtInputAliasSwitchProgramread-createcurrentThe input tray switching program for this 'InputAliasName' presented in a '.' separated list of prtInputIndex values. For example, the string '1.4.3' indicates…
1.3.6.1.4.1.253.8.55.52NodexcmPrtAuxSheet
1.3.6.1.4.1.253.8.55.60NodexcmPrtAuxPackage
1.3.6.1.4.1.253.8.55.60.1TablexcmPrtAuxPackageTablenot-accessiblecurrentThis table lists Auxiliary Sheets enabled for this printer.
1.3.6.1.4.1.253.8.55.60.1.1RowxcmPrtAuxPackageEntrynot-accessiblecurrentAn entry exists corresponding to each entry in the xcmPrtAuxPackageTable.
1.3.6.1.4.1.253.8.55.60.1.1.1ColumnxcmPrtAuxPackageIndexnot-accessiblecurrentA unique value used by the printer to identify this Auxiliary Sheet.
1.3.6.1.4.1.253.8.55.60.1.1.2ColumnxcmPrtAuxPackageRowStatusread-createcurrentManages the status of this conceptual row in the xcmPrtAuxPackageTable.
1.3.6.1.4.1.253.8.55.60.1.1.3ColumnxcmPrtAuxPackageTyperead-createcurrentSpecifies the Auxiliary Sheet type associated with this row. Note: DEFVAL commented out due to the negative enum definition in 15prtxtc being illegal in strict…
1.3.6.1.4.1.253.8.55.60.1.1.4ColumnxcmPrtAuxPackageContentread-createcurrentSpecifies the information content of this auxiliary sheet. The value zero shall mean notSpecified.
1.3.6.1.4.1.253.8.55.60.1.1.5ColumnxcmPrtAuxPackagePrtInputIndexread-createcurrentSpecifies the input tray the printer shall use in printing this auxiliary sheet. The value zero shall mean notSpecified.
1.3.6.1.4.1.253.8.55.60.1.1.6ColumnxcmPrtAuxPackageNextread-createcurrentProvides the index of the next Auxiliary Sheet declared for this printer. This provides a linking mechanism to group auxiliary pages. The last auxiliary page t…
1.3.6.1.4.1.253.8.55.70NodexcmPrtInterpPCL
1.3.6.1.4.1.253.8.55.70.1TablexcmPrtInterpPCLTablenot-accessiblecurrentThis table is an extension to the prtInterpPCLTable.
1.3.6.1.4.1.253.8.55.70.1.1RowxcmPrtInterpPCLEntrynot-accessiblecurrentAn entry exists corresponding to each entry in the xcmPrtInterpPCLTable.
1.3.6.1.4.1.253.8.55.70.1.1.1ColumnxcmPrtInterpPCLRowStatusread-createcurrentManages the status of this conceptual row in the xcmPrtInterpPCLTable.
1.3.6.1.4.1.253.8.55.70.1.1.2ColumnxcmPrtInterpPCLFontSourceDfltread-createcurrentThis object provides the PCL-specific PJL variable 'FONTSOURCE'. 'FONTSOURCE' specifies the device location of the default font in PCL.
1.3.6.1.4.1.253.8.55.70.1.1.3ColumnxcmPrtInterpPCLFontNumberDfltread-createcurrentThis object provides the PCL-specific PJL variable 'FONTNUMBER'. In PCL, 'FONTNUMBER' specifies the ID of the default font within the default FONTSOURCE.
1.3.6.1.4.1.253.8.55.70.1.1.4ColumnxcmPrtInterpPCLPitchNumeratorread-createcurrentThis object along with xcmPrtInterpPCLPitchDenominator sets the default for the PCL-specific PJL variable 'PITCH. These two object sets the default pitch size …
1.3.6.1.4.1.253.8.55.70.1.1.5ColumnxcmPrtInterpPCLPitchDenominatorread-createcurrentThis object along with xcmPrtInterpPCLPitchNumerator sets the default for the PCL-specific PJL variable 'PITCH'. These two object sets the default pitch size f…
1.3.6.1.4.1.253.8.55.70.1.1.6ColumnxcmPrtInterpPCLPtSizeNumeratorread-createcurrentThis object along with xcmPrtInterpPCLPtSizeDenominatr sets the default for the PCL-specific PJL variable 'PTSIZE'. The PTSIZE variable only applies when the F…
1.3.6.1.4.1.253.8.55.70.1.1.7ColumnxcmPrtInterpPCLPtSizeDenominatrread-createcurrentThis object along with xcmPrtInterpPCLPtSizeNumerator sets the default for the PCL-specific PJL variable 'PTSIZE'. The PTSIZE variable only applies when the FO…
1.3.6.1.4.1.253.8.55.70.1.1.50ColumnxcmPrtInterpPCLPrintScreenread-createcurrentThis object sets a special mode for 80 character screen dumps.
1.3.6.1.4.1.253.8.55.75NodexcmPrtMediumTypeSupported
1.3.6.1.4.1.253.8.55.75.2TablexcmPrtMedmTypeSupTablenot-accessiblecurrentA table of specific and general medium 'types' which are associated with this host system.
1.3.6.1.4.1.253.8.55.75.2.1RowxcmPrtMedmTypeSupEntrynot-accessiblecurrentAn entry for a specific or general medium 'types' which is associated with this host system.
1.3.6.1.4.1.253.8.55.75.2.1.1ColumnxcmPrtMedmTypeSupIndexnot-accessiblecurrentA unique value used to identify this medium type supported.
1.3.6.1.4.1.253.8.55.75.2.1.2ColumnxcmPrtMedmTypeSupRowStatusread-createcurrentManages the status of this conceptual row in the 'xcmPrtMedmTypeSupTable'.
1.3.6.1.4.1.253.8.55.75.2.1.3ColumnxcmPrtMedmTypeSupRowPersistenceread-createcurrentIndicates persistence of this row, from the given enumeration.
1.3.6.1.4.1.253.8.55.75.2.1.4ColumnxcmPrtMedmTypeSupNameread-createcurrentNamed 'type' of this medium instance. This can be the name of the media type provided by a user.
1.3.6.1.4.1.253.8.55.75.2.1.5ColumnxcmPrtMedmTypeSupFuserTempread-createcurrentIndicates the relative fuser temperature for this medium type. The range is 1 - 100. A value to '50' indciates the 'normal' fuser temperature. Values higher th…
1.3.6.1.4.1.253.8.55.75.2.1.6ColumnxcmPrtMedmTypeSupPaperTyperead-createcurrentThe paper type for this xcmPrtMedmTypeSupName.
1.3.6.1.4.1.253.8.55.75.2.1.7ColumnxcmPrtMedmTypeSupPDLStringread-createcurrentThe string used in the print stream for this xcmPrtMedmTypeSupName.
1.3.6.1.4.1.253.8.55.75.2.1.8ColumnxcmPrtMedmTypeSupFuserHideread-createcurrentIndicates if the custom type has to be hidden in host drivers. True means the media type is not displayed. False means the media type can be selected for a pri…