XF-RADIOLINK-PTP-TERMINAL-MIB
463 objects
This MIB defines objects on terminal level for point-to-point Radiolink terminals.
Imported Objects
| ENTITY-MIB | entLogicalIndex entPhysicalIndex |
| HC-PerfHist-TC-MIB | HCPerfCurrentCount |
| IF-MIB | ifIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| XF-TOP-MIB | xfRadioLink |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.81.3.4.1 | IdentityxfRadioLinkPtpTerminalMIB | for | This MIB defines objects on terminal level for point-to-point Radiolink terminals. | |
| 1.3.6.1.4.1.193.81.3.4.1.1 | NodexfRadioLinkPtpTerminalObjects | |||
| 1.3.6.1.4.1.193.81.3.4.1.1.1 | TablexfRLPtpTerminalTable | not-accessible | current | Table for Radiolink point-to-point terminal managed objects. The table is indexed with entLogicalIndex. |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1 | RowxfRLPtpTerminalEntry | not-accessible | current | An entry in the xfRLPtpTerminalTable |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.1 | ColumnxfTermId | read-write | current | Network identity for terminal. Same as GNM id. Note! Id TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set. Default = .TRMA. (also for Far End) Near… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.2 | ColumnxfTermType | read-only | current | Terminal type - other - Unknown - rlMLE - MLE classic - rlXfMLE - MMU2 - rlXfMLTN - MMU2B - rlXfMLStandalone(5) - MMU2 CS - rlXfMLTNPT(6) - Pt1 |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.3 | ColumnxfTermProtection | read-write | current | This object sets the protection mode of the terminal. - other - Unknown - unprotected - 1+0 - protectedHotStandby - 1+1 Hot - protectedWorkingStandby - 1+1 Wor… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.4 | ColumnxfTermCapacity | read-write | current | This object sets the capacity on the terminal * other - Unknown * twoE1 - 2x2 Mbps * fourE1 - 4*2 Mbps (only rlMLE) * oneE2 - 8 Mbps * twoE2 - 2x8 Mbps * oneE3… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.5 | ColumnxfTermCapacityCapability | read-only | current | This object shows the capacity capability on the terminal. Binary AND on contained modems units capabilities. |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.6 | ColumnxfTermModulation | read-write | current | This object sets the modulation method on the terminal. Legal settable values are: - cqpsk(2) CQPSK - qam16(3) 16-QAM - qam128(4) 128-QAM - qam32(5) 32-QAM - q… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.7 | ColumnxfTermModulationCapability | read-only | current | This object shows the modulation capability on the terminal. Binary AND on contained modems and radio units capabilities. |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.8 | ColumnxfTermRestore | read-write | current | rlXfMLTN: Restore command is clearing RF, IF and RxLoop, enable xfTermTrapEnable, turn transmitter on and set protection switch mode to Auto. In case of MMU2 E… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.9 | ColumnxfTermAlarmSeverity | read-only | current | This object shows the highest alarm severity for contained units and interfaces in the terminal including E1, E2 and E3 interfaces. Terminal alarm severity is … |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.10 | ColumnxfTermTrapEnable | read-write | current | Disables/enables trap sending from this terminal. Note, terminals with termType = rlXfMLE will not include E1, E2 and E3 interfaces. Default value: enable(2) |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.11 | ColumnxfTermAsPort | read-only | current | rlXfMLTN: Access server port used to reach far end terminals of type rlMLE or rlXfMLE, else notAvailable (1). rlXfMLE: Access server port used to reach a near … |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.12 | ColumnxfTermRemoteIdCheck | read-write | current | This object sets if check of identity of remote terminal shall be performed or not. Legal values are: - enable(2): radio id check enabled - disable(3): radio i… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.13 | ColumnxfTermRemoteId | read-write | current | Network identity for remote terminal. Same as GNM id. Note: TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set. A change of the far end value might … |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.14 | ColumnxfTermPreset | read-write | current | For terminals with termType = rlXfMLE or rlMLE: - Terminal is restored with factory settings. - Protected terminals will be set to unprotected. For terminals w… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.15 | ColumnxfTermBerAlarmThreshold | read-write | current | Threshold for BER alarm. Legal values: - ber1e3(2): BER=1e-3 (default) - ber1e4(3): BER=1e-4 - ber1e5(4): BER=1e-5 - ber1e6(5): BER=1e-6 |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.16 | ColumnxfTermFadeNotificationTimer | read-write | current | Notification suppression timer for protection alarms. Unit: 1 sec Value range: 0-1000 Default value: 200 Near end access: read-write Far end access: read-only … |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.17 | ColumnxfTermEquipmentProtectionIndex | read-only | current | Unprotected: 0 Protected: EntPhysicalindex of MMU in lowest slot |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.18 | ColumnxfTermSysName | read-only | current | The system name of the TN hosting the terminal. Near end terminal: a zero-length string is returned as MIB-II/system/sysName should be used instead. Far end te… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.19 | ColumnxfTermChannelMode | read-write | current | Channel mode for the terminal (administrative status). This is only settable according to xfTermChannelModeCapability. Legal values are: - ccdp(2): Co-Channel … |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.20 | ColumnxfTermChannelModeCapability | read-only | current | Channel mode capability. Legal values are: - ccdp(0) ........ Co-Channel Dual Polarization (XPIC) - accp(1) ........ Adjacent Channels Co-Polarization (non-XPI… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.21 | ColumnxfTermTrafficAndDCN | read-write | current | Enable or disable traffic. AIS is generated on all traffic interfaces when traffic is disabled, i.e. xfTermTrafficAndDCN = DCNOnly. The hop and DCN is working,… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.22 | ColumnxfTermFrameFormat | read-write | current | The frame format version used by the modem. Legal values are: - version0(2) only valid for MMU2 C modems - version1(3) only valid for MMU2 C modem. Default val… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.23 | ColumnxfTermFrameFormatCapability | read-only | current | Frame format versions supported by the modem. Bit 0: modem MMU2 C supports frame format Version 0 Bit 1: modem MMU2 C supports frame format Version 1 (for QAM … |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.24 | ColumnxfTermDCNRadioConfiguration | read-write | current | DCN radio capacity for terminal. Legal values are: - dcnRadio128kbps(2) RFCOH channel only: all RSOH bytes pass transparently over the hop - dcnRadio320kbpsDCC… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.25 | ColumnxfTermDCNRadioCapability | read-only | current | Binary AND on contained MMUs DCN radio configuration capability. bits 210 000 undetermined 001 128kbps 010 320kbpsDCCr 100 320kbpsMSB ... 111 128kbps & 320kbps… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.26 | ColumnxfTermDCNLineConfiguration | read-write | current | DCN line capacity for terminal. Legal values are: transparent(2) All RSOH bytes pass transparently over the hop. dcnLine192kbpsDCCr(3) (default) DCCr dcnLine19… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.27 | ColumnxfTermDCNLineCapability | read-only | current | Binary AND on contained MMUs DCN line configuration. bits 210 000 undetermined 001 transparent 010 192kbpsDCCr 100 192kbpsMSB ... 111 transparent & 192kbpsDCCr… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.28 | ColumnxfTermFadeNotificationConfiguration | read-write | current | This object enables or disables the notification suppress timer for Protection alarm. Default value: enabled(3), Near end access: read-write Far end access: re… |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.29 | ColumnxfTermLineProtection | read-write | current | Administrative status of the line protection for a terminal physical line interface, e.g. MMU2 E and MMU2 F. Operational status is xfRLLineProtectionMode. Lega… |
| 1.3.6.1.4.1.193.81.3.4.1.1.2 | TablexfRLPtpTerminalOutputPowerTable | not-accessible | current | Table for Radiolink point-to-points terminal output power managed objects. The tabled is indexed with entLogicalIndex. |
| 1.3.6.1.4.1.193.81.3.4.1.1.2.1 | RowxfRLPtpTerminalOutputPowerEntry | not-accessible | current | An entry in the xfRLPtpTerminalOutputPowerTable |
| 1.3.6.1.4.1.193.81.3.4.1.1.2.1.1 | ColumnxfTermOutputPowerOperStatus | read-only | current | This object shows the output power mode that is running. It is necessarily not equal to configured mode. |
| 1.3.6.1.4.1.193.81.3.4.1.1.2.1.2 | ColumnxfTermOutputPowerAdminStatus | read-write | current | This object sets the output mode of the terminal. Legal values are: - other(1) - rtpc(2) - atpc(3) - localControl(4) - ra1LocalControlRa2Rtpc(5) - ra1RtpcRa2Lo… |
| 1.3.6.1.4.1.193.81.3.4.1.1.2.1.3 | ColumnxfTermAtpcCapability | read-only | current | This object shows the ATPC capability for the terminal, calculated as worst case capability for all units contained in the terminal. |
| 1.3.6.1.4.1.193.81.3.4.1.1.4 | TablexfRLPtpTerminalPerformanceTable | not-accessible | current | Table for performance data. For 1+0 systems performance data is calculated according to ITU-T Rec. G.826. For 1+1 systems - calculated as the combined performa… |
| 1.3.6.1.4.1.193.81.3.4.1.1.4.1 | RowxfRLPtpTerminalPerformanceEntry | not-accessible | current | An entry in the xfRLPtpTerminalPerformanceTable |
| 1.3.6.1.4.1.193.81.3.4.1.1.4.1.1 | ColumnxfTermTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the age… |
| 1.3.6.1.4.1.193.81.3.4.1.1.4.1.2 | ColumnxfTermCurrentES | read-only | current | This object shows the error seconds. |
| 1.3.6.1.4.1.193.81.3.4.1.1.4.1.3 | ColumnxfTermCurrentSES | read-only | current | This object shows the severely error seconds. |
| 1.3.6.1.4.1.193.81.3.4.1.1.4.1.4 | ColumnxfTermCurrentBBE | read-only | current | This object shows the background block errors. |
| 1.3.6.1.4.1.193.81.3.4.1.1.4.1.5 | ColumnxfTermCurrentUAS | read-only | current | This object shows the unavailable seconds (or unavailable time). |
| 1.3.6.1.4.1.193.81.3.4.1.1.4.1.6 | ColumnxfTermCurrentBB | read-only | current | This object shows the background blocks. |
| 1.3.6.1.4.1.193.81.3.4.1.1.4.1.7 | ColumnxfTermPerfReset | read-write | current | This object is used to reset the performance counters. It is settable also when the radio unit isn't present. Near end access: read-write Far end access: read-… |
| 1.3.6.1.4.1.193.81.3.4.1.1.4.1.8 | ColumnxfTermTimeElapsedEnRLBExt | read-only | current | The number of seconds that have elapsed in Enhanced RLB Extended capacity mode since RLB was enabled and the beginning of the current measurement period. |
| 1.3.6.1.4.1.193.81.3.4.1.1.5 | TablexfRLProtectionTable | not-accessible | current | Table for control and supervision of the protection mechanism |
| 1.3.6.1.4.1.193.81.3.4.1.1.5.1 | RowxfRLProtectionEntry | not-accessible | current | An entry in the xfRLProtectionTable |
| 1.3.6.1.4.1.193.81.3.4.1.1.5.1.1 | ColumnxfRLProtectionMode | read-only | current | This is the operational status of the protection mode. Default: unprotected(2) |
| 1.3.6.1.4.1.193.81.3.4.1.1.5.1.2 | ColumnxfRLProtectionRau1 | read-only | current | entPhysicalIndex for RAU 1. |
| 1.3.6.1.4.1.193.81.3.4.1.1.5.1.3 | ColumnxfRLProtectionRau2 | read-only | current | entPhysicalIndex for RAU 2. |
| 1.3.6.1.4.1.193.81.3.4.1.1.5.1.4 | ColumnxfRLActiveTxRadio | read-write | current | Active radio setting. Default value: txRadio1(1) |
| 1.3.6.1.4.1.193.81.3.4.1.1.5.1.5 | ColumnxfRLSwitchOverReset | read-write | current | Reset of the activated external alarms Tx Switch Over and Remote Tx Switch Over by resetting internal alarms. |
| 1.3.6.1.4.1.193.81.3.4.1.1.5.1.6 | ColumnxfRLSwitchRevertiveTx | read-write | current | Preferred Tx Radio. Default value: off(3) Near end access: read-write Far end access: read-only (Traffic Node only) |
| 1.3.6.1.4.1.193.81.3.4.1.1.5.1.7 | ColumnxfRLProtectionCapability | read-only | current | This object shows the protection capabilities of the traffic node. Near end access: read-only Far end access: read-only |
| 1.3.6.1.4.1.193.81.3.4.1.1.5.1.8 | ColumnxfRLTxSwitchOverConfiguration | read-write | current | Indicates whether the remote Tx switching function and Tx switchover alarm are enabled. When disabled, the remote Tx switching function is disabled and Tx swit… |
| 1.3.6.1.4.1.193.81.3.4.1.1.6 | TablexfRLLineProtectionTable | not-accessible | current | Table for line protection status. |
| 1.3.6.1.4.1.193.81.3.4.1.1.6.1 | RowxfRLLineProtectionEntry | not-accessible | current | An entry in the xfRLLineProtectionTable |
| 1.3.6.1.4.1.193.81.3.4.1.1.6.1.1 | ColumnxfRLLineProtectionStatus | read-only | current | Extension to xfLineProtectionStatus. |
| 1.3.6.1.4.1.193.81.3.4.1.1.6.1.2 | ColumnxfRLLineProtectionMode | read-only | current | Operational status of the line protection for a terminal physical line interface, e.g. MMU2 E and MMU2 F. Administrative status is xfTermLineProtection. |
| 1.3.6.1.4.1.193.81.3.4.1.1.7 | TablexfRADIORSTable | not-accessible | current | Traffic node extension of ifTable. The tabled is indexed with ifIndex. |
| 1.3.6.1.4.1.193.81.3.4.1.1.7.1 | RowxfRADIORSEntry | not-accessible | current | An entry in the xfRADIORSTable |
| 1.3.6.1.4.1.193.81.3.4.1.1.7.1.1 | ColumnxfRADIORSAlarms | read-only | current | This object shows rau rs related alarms. |
| 1.3.6.1.4.1.193.81.3.4.1.1.8 | TablexfRADIORSPerformanceTable | not-accessible | current | Traffic node extension of ifTable. The tabled is indexed with ifIndex. |
| 1.3.6.1.4.1.193.81.3.4.1.1.8.1 | RowxfRADIORSPerformanceEntry | not-accessible | current | An entry in the xfRADIORSPerformanceTable |
| 1.3.6.1.4.1.193.81.3.4.1.1.8.1.1 | ColumnxfRADIORSPerformanceAlarms | read-only | current | This object shows RAU RS related alarms. |
| 1.3.6.1.4.1.193.81.3.4.1.1.9 | TablexfRLPMConfigTable | not-accessible | current | This table contains the alarm threshold values for RL PM |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1 | RowxfRLPMConfigEntry | not-accessible | current | Entry in the xfRLPMConfigTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.1 | ColumnxfPMSetThreshold15mESs | read-write | current | The 15 minute set threshold for ES. Default value is 180. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.2 | ColumnxfPMSetThreshold15mSESs | read-write | current | The 15 minute set threshold for SES. Default value is 15. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.3 | ColumnxfPMSetThreshold15mBBEs | read-write | current | The 15 minute set threshold for BBE. Default value is 9900. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.4 | ColumnxfPMResetThreshold15mESs | read-write | current | The 15 minute reset threshold for ES. Default value is 20. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.5 | ColumnxfPMResetThreshold15mSESs | read-write | current | The 15 minute reset threshold for SES. Default value is 1. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.6 | ColumnxfPMResetThreshold15mBBEs | read-write | current | The 15 minute reset threshold for BBE. Default value is 200. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.7 | ColumnxfPMSetThreshold24hESs | read-write | current | The 24 hours set threshold for ES. Default value is 1500. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.8 | ColumnxfPMSetThreshold24hSESs | read-write | current | The 24 hours set threshold for SES. Default value is 20. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.9 | ColumnxfPMSetThreshold24hBBEs | read-write | current | The 24 hours set threshold for BBE. Default value is 48000. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.10 | ColumnxfPMView | read-write | current | Enable/disable visibility of PM tables. Default value: pmEnable(1) Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.11 | ColumnxfPMStatus | read-only | current | Threshold alarm status. Values from rlts1Counter15m0(21) to tltmCounter24h2(50) are related to obsoleted MOs. |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.12 | ColumnxfPMRLTS1Threshold | read-write | current | RLTS1 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.9 ... -20.1 dBm] Valid for both 15 m & 24 h intervals. If changed… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.13 | ColumnxfPMSetThreshold15mRLTS1 | read-write | current | Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold f… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.14 | ColumnxfPMResetThreshold15mRLTS1 | read-write | current | Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.15 | ColumnxfPMRLTS2Threshold | read-write | current | RLTS2 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.8 ... -20.0 dBm] Valid for both 15 m & 24 h intervals. If changed… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.16 | ColumnxfPMSetThreshold15mRLTS2 | read-write | current | Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold f… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.17 | ColumnxfPMResetThreshold15mRLTS2 | read-write | current | Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.18 | ColumnxfPMSetThreshold15mRLTM | read-write | current | Receive Level Tide Mark (RLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Input Power in current 15 minute interval. RF inpu… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.19 | ColumnxfPMResetThreshold15mRLTM | read-write | current | Receive Level Tide Mark (RLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Input Power for entire current 15 minute interva… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.20 | ColumnxfPMTLTS1Threshold | read-write | current | TLTS1 Alarm Threshold for Maximum RF Output Power. RF output level = value dBm. Domain: [-100 ... 45 dBm] Valid for both 15 m & 24 h intervals. If changed curr… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.21 | ColumnxfPMSetThreshold15mTLTS1 | read-write | current | Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Thresh… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.22 | ColumnxfPMResetThreshold15mTLTS1 | read-write | current | Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Thre… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.23 | ColumnxfPMSetThreshold15mTLTM | read-write | current | Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Output Power in current 15 minute interval. RF… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.24 | ColumnxfPMResetThreshold15mTLTM | read-write | current | Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Output Power for entire current 15 minute in… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.25 | ColumnxfPMSetThreshold24hRLTS1 | read-write | current | Received Level 1 Threshold Second (RLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Thres… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.26 | ColumnxfPMSetThreshold24hRLTS2 | read-write | current | Received Level 2 Threshold Second (RLTS2) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Thres… |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.27 | ColumnxfPMSetThreshold24hRLTM | read-write | current | Receive Level Tide Mark (RLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Input Power in current 24 hour interval. RF … |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.28 | ColumnxfPMSetThreshold24hTLTS1 | read-write | current | Transmitted Levels 1 Threshold Second (TLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm … |
| 1.3.6.1.4.1.193.81.3.4.1.1.9.1.29 | ColumnxfPMSetThreshold24hTLTM | read-write | current | Transmitted Level Tide Mark (TLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Output Power in current 24 hour interval… |
| 1.3.6.1.4.1.193.81.3.4.1.1.10 | TablexfRLPMCurrent24hTable | not-accessible | current | TBD |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1 | RowxfRLPMCurrent24hEntry | not-accessible | current | Entry in the xfRLPMCurrent24hTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.1 | ColumnxfPMCurrent24hTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the age… |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.2 | ColumnxfPMCurrent24hESs | read-only | current | Errored Seconds in the current 24-hour interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.3 | ColumnxfPMCurrent24hSESs | read-only | current | Severely Errored Seconds in the current 24-hour interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.4 | ColumnxfPMCurrent24hBBEs | read-only | current | Background Block Errors in the current 24 hour interval |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.5 | ColumnxfPMCurrent24hUASs | read-only | current | Unavailable seconds (or Unavailable Time) in the current 24 hour interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.6 | ColumnxfPMCurrent24hBBs | read-only | current | The number of Background Blocks in the current 24 hour interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.7 | ColumnxfPMCurrent24hRLTS1 | read-only | current | Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the current 24 hour interval. -1 indicates … |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.8 | ColumnxfPMCurrent24hRLTS2 | read-only | current | Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the current 24 hour interval. -1 indicates … |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.9 | ColumnxfPMCurrent24hRLMin | read-only | current | Indicate Min RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset b… |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.10 | ColumnxfPMCurrent24hRLMax | read-only | current | Indicate Max RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset b… |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.11 | ColumnxfPMCurrent24hTLTS1 | read-only | current | Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the current 24 hour interval -1 indicat… |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.12 | ColumnxfPMCurrent24hTLMin | read-only | current | Indicate Min RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPe… |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.13 | ColumnxfPMCurrent24hTLMax | read-only | current | Indicate Max RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPe… |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.14 | ColumnxfPMCurrent24hMSEMin | read-only | current | Indicate Min MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfR… |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.15 | ColumnxfPMCurrent24hMSEMax | read-only | current | Indicate Max MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfR… |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.16 | ColumnxfPMCurrent24hXPIMin | read-only | current | Indicate Min Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid … |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.17 | ColumnxfPMCurrent24hXPIMax | read-only | current | Indicate Max Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid … |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.18 | ColumnxfPMCurrent24hESR | read-only | current | Error Seconds Ratio in the current 24-hour interval |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.19 | ColumnxfPMCurrent24hSESR | read-only | current | Severely Error Seconds Ratio in the current 24-hour interval |
| 1.3.6.1.4.1.193.81.3.4.1.1.10.1.20 | ColumnxfPMCurrent24hBBER | read-only | current | Background Block Errors Ratio in the current 24-hour interval |
| 1.3.6.1.4.1.193.81.3.4.1.1.11 | TablexfRLPMInterval24hTable | not-accessible | current | TBD |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1 | RowxfRLPMInterval24hEntry | not-accessible | current | Entry in the xfRLPMInterval24hTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.1 | ColumnxfPMInterval24hESs | read-only | current | The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the previous 24-hour interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.2 | ColumnxfPMInterval24hSESs | read-only | current | The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the previous 24-hour interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.3 | ColumnxfPMInterval24hBBEs | read-only | current | The counter associated with the number of Coding Violations (Errored Blocks) encountered by a SONET/SDH Section in the previous 24-hour interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.4 | ColumnxfPMInterval24hUASs | read-only | current | The number of UnAvailable Seconds encountered by a SONET/SDH Section in the previous 24 hour interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.5 | ColumnxfPMInterval24hBBs | read-only | current | The number of Background Blocks in a SONET/SDH Section in the previous 24 hour interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.6 | ColumnxfPMInterval24hValidData | read-only | current | This variable indicates whether the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.7 | ColumnxfPMInterval24hRLTS1 | read-only | current | Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the previous 24 hour interval. -1 indicates… |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.8 | ColumnxfPMInterval24hRLTS2 | read-only | current | Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the previous 24 hour interval. -1 indicates… |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.9 | ColumnxfPMInterval24hRLMin | read-only | current | Indicate Min RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset … |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.10 | ColumnxfPMInterval24hRLMax | read-only | current | Indicate Max RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset … |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.11 | ColumnxfPMInterval24hTLTS1 | read-only | current | Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the previous 24 hour interval -1 indica… |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.12 | ColumnxfPMInterval24hTLMin | read-only | current | Indicate Min RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermP… |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.13 | ColumnxfPMInterval24hTLMax | read-only | current | Indicate Max RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermP… |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.14 | ColumnxfPMInterval24hMSEMin | read-only | current | Indicate Min MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerf… |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.15 | ColumnxfPMInterval24hMSEMax | read-only | current | Indicate Max MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerf… |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.16 | ColumnxfPMInterval24hXPIMin | read-only | current | Indicate Min Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid… |
| 1.3.6.1.4.1.193.81.3.4.1.1.11.1.17 | ColumnxfPMInterval24hXPIMax | read-only | current | Indicate Max Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12 | TablexfRLPMCurrent15mTable | not-accessible | current | TBD |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1 | RowxfRLPMCurrent15mEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.1 | ColumnxfPMCurrent15mElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.2 | ColumnxfPMCurrent15mESs | read-only | current | Error seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.3 | ColumnxfPMCurrent15mSESs | read-only | current | Severely error seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.4 | ColumnxfPMCurrent15mBBEs | read-only | current | Background Block Errors in the current 15 minute interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.5 | ColumnxfPMCurrent15mUASs | read-only | current | Unavailable seconds (or Unavailable Time) in the current 15 minute interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.6 | ColumnxfPMCurrent15mBBs | read-only | current | The number of Background Blocks encountered by a SONET/SDH Section in the current 15 minute interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.7 | ColumnxfPMCurrent15mRLTS1 | read-only | current | Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the current 15 minute interval. -1 indicat… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.8 | ColumnxfPMCurrent15mRLTS2 | read-only | current | Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the current 15 minute interval. -1 indicat… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.9 | ColumnxfPMCurrent15mRLMin | read-only | current | Indicate Min RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.10 | ColumnxfPMCurrent15mRLMax | read-only | current | Indicate Max RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.11 | ColumnxfPMCurrent15mTLTS1 | read-only | current | Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the current 15 minute interval -1 indi… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.12 | ColumnxfPMCurrent15mTLMin | read-only | current | Indicate Min RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTerm… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.13 | ColumnxfPMCurrent15mTLMax | read-only | current | Indicate Max RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTerm… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.14 | ColumnxfPMCurrent15mMSEMin | read-only | current | Indicate Min MSE level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPer… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.15 | ColumnxfPMCurrent15mMSEMax | read-only | current | Indicate Max MSE level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPer… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.16 | ColumnxfPMCurrent15mXPIMin | read-only | current | Indicate Min Cross-Polar Interference (XPI) level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invali… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.17 | ColumnxfPMCurrent15mXPIMax | read-only | current | Indicate Max Cross-Polar Interference (XPI) level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invali… |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.18 | ColumnxfPMCurrent15mESR | read-only | current | Error Seconds Ratio in the current 15 minute interval |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.19 | ColumnxfPMCurrent15mSESR | read-only | current | Severely Error Seconds Ratio in the current 15 minute interval |
| 1.3.6.1.4.1.193.81.3.4.1.1.12.1.20 | ColumnxfPMCurrent15mBBER | read-only | current | Background Block Errors Ratio in the current 15 minute interval |
| 1.3.6.1.4.1.193.81.3.4.1.1.13 | TablexfRLPMInterval15mTable | not-accessible | current | TBD |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1 | RowxfRLPMInterval15mEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.1 | ColumnxfPMInterval15mIntervalNumber | read-only | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.2 | ColumnxfPMInterval15mESs | read-only | current | Error seconds in the xfPMInterval15mIntervalNumber 15 minute interval |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.3 | ColumnxfPMInterval15mSESs | read-only | current | Severely error seconds in the xfPDHCompInterval15mIntervalNumber 15 minute interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.4 | ColumnxfPMInterval15mBBEs | read-only | current | Background Block Errors in the xfPDHCompInterval15mIntervalNumber 15 minute intervall. |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.5 | ColumnxfPMInterval15mUASs | read-only | current | UnAvailable Seconds in the xfPDHCompInterval15mIntervalNumber 15 minute interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.6 | ColumnxfPMInterval15mBBs | read-only | current | Background blocks in the xfPDHCompInterval15mIntervalNumber 15 minute interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.7 | ColumnxfPMInterval15mValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.8 | ColumnxfPMInterval15mRLTS1 | read-only | current | Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the previous 15 minute interval. -1 indica… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.9 | ColumnxfPMInterval15mRLTS2 | read-only | current | Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the previous 15 minute interval. -1 indica… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.10 | ColumnxfPMInterval15mRLMin | read-only | current | Indicate Min RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Rese… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.11 | ColumnxfPMInterval15mRLMax | read-only | current | Indicate Max RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Rese… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.12 | ColumnxfPMInterval15mTLTS1 | read-only | current | Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the previous 15 minute interval -1 ind… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.13 | ColumnxfPMInterval15mTLMin | read-only | current | Indicate Min RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTer… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.14 | ColumnxfPMInterval15mTLMax | read-only | current | Indicate Max RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTer… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.15 | ColumnxfPMInterval15mMSEMin | read-only | current | Indicate Min MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPe… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.16 | ColumnxfPMInterval15mMSEMax | read-only | current | Indicate Max MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPe… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.17 | ColumnxfPMInterval15mXPIMin | read-only | current | Indicate Min Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates inval… |
| 1.3.6.1.4.1.193.81.3.4.1.1.13.1.18 | ColumnxfPMInterval15mXPIMax | read-only | current | Indicate Max Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates inval… |
| 1.3.6.1.4.1.193.81.3.4.1.1.14 | TablexfRLPtpTerminalXTable | not-accessible | current | Extension table to xfRLPtpTerminalTable. The table is indexed with entLogicalIndex. |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1 | RowxfRLPtpTerminalXEntry | not-accessible | current | Entry in the table |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.1 | ColumnxfTermInterfaces | read-write | current | Interface constellation for the terminal |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.2 | ColumnxfTermInterfacesCapability | read-only | current | Interface constellation capability for the terminal |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.3 | ColumnxfTermChannelModeOperStatus | read-only | current | Channel mode for the terminal (operational status). - ccdp(2): Co-Channel Dual Polarization (XPIC) - accp(3): Adjacent Channels Co-Polarization (non-XPIC) - ac… |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.4 | ColumnxfTermXPICRestore | read-write | current | Restore XPIC |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.5 | ColumnxfTermTribCapacityActual | read-only | current | Actual tributary capacity |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.6 | ColumnxfTermTribCapacityDesired | read-write | current | Desired tributary capacity |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.7 | ColumnxfTermBitPipeCapacity | read-only | current | Bit pipe capacity, Kbps |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.8 | ColumnxfTermRowIndex | read-write | current | Points to a row in xfRlPtpTerminalCapabilityTable |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.9 | ColumnxfTermCapabilitiesLastChange | read-only | current | The value of sysUpTime at the time of the last creation or deletion of an entry in the xfRLPtpTerminalCapabilityTable. If the number of entries has been unchan… |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.10 | ColumnxfTermActualRowIndex | read-only | current | The actual row that is pointed out in xfRlPtpTerminalCapabilityTable |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.11 | ColumnxfTermMaxRowIndex | read-write | current | Points to a row in xfRlPtpTerminalCapabilityTable where the maximum capacity is, including license |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.12 | ColumnxfTermAdaptiveManualRowIndex | read-write | current | Manual row index |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.13 | ColumnxfTermAdaptiveManualMode | read-write | current | Adaptive manual mode - other(1) - disable(2)(default) - enable(3) - enabledAsRequest(4) |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.14 | ColumnxfTermSpectrumEfficiencyClass | read-write | current | Spectrum Efficiency Class: - other(1): unknown - sec2(2): spectrum eff. Class 2 - sec3(3): spectrum eff. Class 3 - sec4L(4): spectrum eff. Class 4L - sec4H(5):… |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.15 | ColumnxfTermSpectrumEfficiencyClassCapability | read-only | current | Spectrum Efficiency Class Capability - 0 Sec2 Spectrum eff. Class 2 - 1 Sec3 Specturm eff. Class 3 - 2 Sec4L Specturm eff. Class 4L - 3 Sec4H Spectrum eff. Cla… |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.16 | ColumnxfTermIpAddress | read-only | current | LAN ip address |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.17 | ColumnxfTermProtectionCapability | read-only | current | Terminal protection capability - 0 Unprotected ............... The terminal supports 1+0 - 1 protectedHotStandby ....... The terminal supports 1+1 Hot Standby … |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.18 | ColumnxfTermLineProtectionCapability | read-only | current | Terminal Line protection capability - 0 unprotected ................. - 1 singleInterfaceLowSlot ...... - 2 singleInterfaceHighSlot ..... - 3 opticalSplitter .… |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.19 | ColumnxfTermTribAllocationActual | read-only | current | Actual tributary allocation in a MMU2 D or MMU2 H, the rest is packet link |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.20 | ColumnxfTermTribAllocationDesired | read-write | current | Desired tibutary allocation in a MMU2 D or MMU2 H, the rest is packet link |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.21 | ColumnxfTermAutoRemoveLoopEnable | read-write | current | Auto Remove Loops - other(1) - enable(2) (default) - disable(3) |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.22 | ColumnxfTermCapability | read-only | current | Terminal capability |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.23 | ColumnxfTermCapacityLicense | read-write | current | Licensetable |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.24 | ColumnxfTermFadingRates | read-write | current | Fading rates - other(1): unknown - fr50(2): 50dB/s HighTroughputMode (default) - fr150(3): 100dB/s HighFadingResistanceMode |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.25 | ColumnxfTermFadingRatesCapability | read-only | current | Fading rate capability - fr50(0): HighTroughputMode - fr100(1): HighFadingResistanceMode |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.26 | ColumnxfTermConfiguredBitPipeCapacity | read-only | current | Configured bit pipe capacity, Kbps |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.27 | ColumnxfTermTribCapacityConfigured | read-only | current | Configured tributary capacity |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.28 | ColumnxfTermPacketMaxCapacity | read-only | current | Packet Max Capacity |
| 1.3.6.1.4.1.193.81.3.4.1.1.14.1.29 | ColumnxfTermPacketMinCapacity | read-only | current | Packet Min Capacity |
| 1.3.6.1.4.1.193.81.3.4.1.1.15 | TablexfRlPtpTerminalCapabilityTable | not-accessible | current | Table for misc. capability informatio. |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1 | RowxfRlPtpTerminalCapabilityEntry | not-accessible | current | Entry in the table |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1.1 | ColumnxfTermChannelSpacing | read-only | current | Channel spacing - ETSI: 3.5, 7, 14, 28, 40, 56 MHz - ANSI: 10, 20, 30, 40, 50, 60 MHz |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1.2 | ColumnxfTermChannelModulation | read-only | current | Channel modulation - cqpsk(2) CQPSK - qam16(3) 16-QAM - qam128(4) 128-QAM - qam32(5) 32-QAM - qam64(6) 64-QAM - qam4(7) 4-QAM - qam8(8) 8-QAM - qam256(9) 256-Q… |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1.3 | ColumnxfTermMaxTribCapacity | read-only | current | Max number of tributaries |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1.4 | ColumnxfTermDCNCapacity | read-only | current | DCN hop capacity |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1.5 | ColumnxfTermValidRow | read-only | current | Max capacity license - vr0(0) = invalid row - vr10(1) = 10 Mbps, no license - vr25(2) = 25 Mbps - vr50(3) = 50 Mbps - vr100(4) = 100 Mbps - vr15(5) = 15 Mbps -… |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1.6 | ColumnxfTermMaxCapacity | read-only | current | Max capacity |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1.7 | ColumnxfTermSpectrumEfficiencyClassObsolete | read-only | obsolete | xfTermSpectrumEfficiencyClassObsolete |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1.8 | ColumnxfTermFrameFormatType | read-only | current | Frame format type - fftOther(0) - fftStatic(1) - fftAdmod(2) - fftXpic(3) - fftXpicAdmod(4) - fftLegacy(5) - fftStaticLH(6) - fftAdmodLH(7) - fftXpicLH(8) - ff… |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1.9 | ColumnxfTermFrameFormatRev | read-only | current | Frame format revision |
| 1.3.6.1.4.1.193.81.3.4.1.1.15.1.10 | ColumnxfTermBerAlarmThresholdCapability | read-only | current | List of the allowed BER thresholds |
| 1.3.6.1.4.1.193.81.3.4.1.1.16 | TablexfRLPMAMConfigTable | not-accessible | current | Alarm threshold values for RL PM |
| 1.3.6.1.4.1.193.81.3.4.1.1.16.1 | RowxfRLPMAMConfigEntry | not-accessible | current | Entry in the xfRLPMAMConfigTable |
| 1.3.6.1.4.1.193.81.3.4.1.1.16.1.1 | ColumnxfPMAMSetThreshold15m | read-write | current | The 15 minute set threshold for AdMod. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.16.1.2 | ColumnxfPMAMSetThreshold24h | read-write | current | The 24 hour set threshold for AdMod. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.16.1.3 | ColumnxfPMAMResetThreshold15m | read-write | current | The 15 minute reset threshold for AdMod. Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.16.1.4 | ColumnxfPMAMStatus | read-only | current | Threshold alarm status |
| 1.3.6.1.4.1.193.81.3.4.1.1.16.1.5 | ColumnxfPMAMValidData | read-only | current | It reports which modulation's PM data that are valid. |
| 1.3.6.1.4.1.193.81.3.4.1.1.17 | TablexfRLPMAMCurrent24hTable | not-accessible | current | TBD |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1 | RowxfRLPMAMCurrent24hEntry | not-accessible | current | Entry in the xfRLPMAMCurrent24hTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.1 | ColumnxfPMAMCurrent24h4QAM | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.2 | ColumnxfPMAMCurrent24h8QAM | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.3 | ColumnxfPMAMCurrent24h16QAM | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.4 | ColumnxfPMAMCurrent24h32QAM | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.5 | ColumnxfPMAMCurrent24h64QAM | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.6 | ColumnxfPMAMCurrent24h128QAM | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.7 | ColumnxfPMAMCurrent24h256QAM | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.8 | ColumnxfPMAMCurrent24h512QAM | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.9 | ColumnxfPMAMCurrent24h1024QAM | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.10 | ColumnxfPMAMCurrent24h4QAMEnRLB | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.11 | ColumnxfPMAMCurrent24h8QAMEnRLB | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.12 | ColumnxfPMAMCurrent24h16QAMEnRLB | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.13 | ColumnxfPMAMCurrent24h32QAMEnRLB | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.14 | ColumnxfPMAMCurrent24h64QAMEnRLB | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.15 | ColumnxfPMAMCurrent24h128QAMEnRLB | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.16 | ColumnxfPMAMCurrent24h256QAMEnRLB | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.17 | ColumnxfPMAMCurrent24h512QAMEnRLB | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.17.1.18 | ColumnxfPMAMCurrent24h1024QAMEnRLB | read-only | current | Valid time since reset |
| 1.3.6.1.4.1.193.81.3.4.1.1.18 | TablexfRLPMAMInterval24hTable | not-accessible | current | TBD |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1 | RowxfRLPMAMInterval24hEntry | not-accessible | current | Entry in the xfRLPMAMInterval24hTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.1 | ColumnxfPMAMInterval24h4QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.2 | ColumnxfPMAMInterval24h8QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.3 | ColumnxfPMAMInterval24h16QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.4 | ColumnxfPMAMInterval24h32QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.5 | ColumnxfPMAMInterval24h64QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.6 | ColumnxfPMAMInterval24h128QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.7 | ColumnxfPMAMInterval24h256QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.8 | ColumnxfPMAMInterval24h512QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.9 | ColumnxfPMAMInterval24hValidData | read-only | current | This variable indicates whether the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.10 | ColumnxfPMAMInterval24h1024QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.11 | ColumnxfPMAMInterval24h4QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.12 | ColumnxfPMAMInterval24h8QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.13 | ColumnxfPMAMInterval24h16QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.14 | ColumnxfPMAMInterval24h32QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.15 | ColumnxfPMAMInterval24h64QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.16 | ColumnxfPMAMInterval24h128QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.17 | ColumnxfPMAMInterval24h256QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.18 | ColumnxfPMAMInterval24h512QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.18.1.19 | ColumnxfPMAMInterval24h1024QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19 | TablexfRLPMAMCurrent15mTable | not-accessible | current | TBD |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1 | RowxfRLPMAMCurrent15mEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.1 | ColumnxfPMAMCurrent15m4QAM | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.2 | ColumnxfPMAMCurrent15m8QAM | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.3 | ColumnxfPMAMCurrent15m16QAM | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.4 | ColumnxfPMAMCurrent15m32QAM | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.5 | ColumnxfPMAMCurrent15m64QAM | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.6 | ColumnxfPMAMCurrent15m128QAM | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.7 | ColumnxfPMAMCurrent15m256QAM | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.8 | ColumnxfPMAMCurrent15m512QAM | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.9 | ColumnxfPMAMCurrent15m1024QAM | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.10 | ColumnxfPMAMCurrent15m4QAMEnRLB | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.11 | ColumnxfPMAMCurrent15m8QAMEnRLB | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.12 | ColumnxfPMAMCurrent15m16QAMEnRLB | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.13 | ColumnxfPMAMCurrent15m32QAMEnRLB | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.14 | ColumnxfPMAMCurrent15m64QAMEnRLB | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.15 | ColumnxfPMAMCurrent15m128QAMEnRLB | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.16 | ColumnxfPMAMCurrent15m256QAMEnRLB | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.17 | ColumnxfPMAMCurrent15m512QAMEnRLB | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.19.1.18 | ColumnxfPMAMCurrent15m1024QAMEnRLB | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20 | TablexfRLPMAMInterval15mTable | not-accessible | current | TBD |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1 | RowxfRLPMAMInterval15mEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.1 | ColumnxfPMAMInterval15mIntervalNumber | read-only | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.2 | ColumnxfPMAMInterval15m4QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.3 | ColumnxfPMAMInterval15m8QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.4 | ColumnxfPMAMInterval15m16QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.5 | ColumnxfPMAMInterval15m32QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.6 | ColumnxfPMAMInterval15m64QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.7 | ColumnxfPMAMInterval15m128QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.8 | ColumnxfPMAMInterval15m256QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.9 | ColumnxfPMAMInterval15m512QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.10 | ColumnxfPMAMInterval15mValidData | read-only | current | This variable indicates whether the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.11 | ColumnxfPMAMInterval15m1024QAM | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.12 | ColumnxfPMAMInterval15m4QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.13 | ColumnxfPMAMInterval15m8QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.14 | ColumnxfPMAMInterval15m16QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.15 | ColumnxfPMAMInterval15m32QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.16 | ColumnxfPMAMInterval15m64QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.17 | ColumnxfPMAMInterval15m128QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.18 | ColumnxfPMAMInterval15m256QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.19 | ColumnxfPMAMInterval15m512QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.20.1.20 | ColumnxfPMAMInterval15m1024QAMEnRLB | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.1.1.21 | TablexfRLPtpTerminalCapacityLicenseTable | not-accessible | current | TBD |
| 1.3.6.1.4.1.193.81.3.4.1.1.21.1 | RowxfRLPtpTerminalCapacityLicenseEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.1.1.21.1.1 | ColumnxfTermCapacityLicenseRange | read-only | current | xfTermCapacityLicenseRange |
| 1.3.6.1.4.1.193.81.3.4.1.1.21.1.2 | ColumnxfTermMaxCapacityRange | read-only | current | TermMaxCapacityRange |
| 1.3.6.1.4.1.193.81.3.4.1.1.21.1.3 | ColumnxfTermMaxTribCapacityRange | read-only | current | xfTermMaxTribCapacityRange |
| 1.3.6.1.4.1.193.81.3.4.1.1.22 | TablexfRLPMSDCGainCurrent15mTable | not-accessible | current | This table monitors the time spent in each SDC gain value in the current 15 minute period. |
| 1.3.6.1.4.1.193.81.3.4.1.1.22.1 | RowxfRLPMSDCGainCurrent15mEntry | not-accessible | current | Entry in xfRLPMSDCGainCurrent15mTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.22.1.1 | ColumnxfPMSDCGainCurrent15m0005dB | read-only | current | The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.22.1.2 | ColumnxfPMSDCGainCurrent15m0510dB | read-only | current | The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.22.1.3 | ColumnxfPMSDCGainCurrent15m1015dB | read-only | current | The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.22.1.4 | ColumnxfPMSDCGainCurrent15m1520dB | read-only | current | The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.22.1.5 | ColumnxfPMSDCGainCurrent15m2025dB | read-only | current | The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.22.1.6 | ColumnxfPMSDCGainCurrent15m2530dB | read-only | current | The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.23 | TablexfRLPMSDCGainInterval15mTable | not-accessible | current | This table collects the time spent in each SDC gain value for the 15 minute intervals. |
| 1.3.6.1.4.1.193.81.3.4.1.1.23.1 | RowxfRLPMSDCGainInterval15mEntry | not-accessible | current | Entry in xfRLPMSDCGainInterval15mTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.23.1.1 | ColumnxfPMSDCGainInterval15mIntervalNumber | read-only | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.193.81.3.4.1.1.23.1.2 | ColumnxfPMSDCGainInterval15m0005dB | read-only | current | The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.23.1.3 | ColumnxfPMSDCGainInterval15m0510dB | read-only | current | The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.23.1.4 | ColumnxfPMSDCGainInterval15m1015dB | read-only | current | The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.23.1.5 | ColumnxfPMSDCGainInterval15m1520dB | read-only | current | The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.23.1.6 | ColumnxfPMSDCGainInterval15m2025dB | read-only | current | The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.23.1.7 | ColumnxfPMSDCGainInterval15m2530dB | read-only | current | The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.24 | TablexfRLPMSDCGainCurrent24hTable | not-accessible | current | This table monitors the time spent in each SDC gain value in the current 24 hours period. |
| 1.3.6.1.4.1.193.81.3.4.1.1.24.1 | RowxfRLPMSDCGainCurrent24hEntry | not-accessible | current | Entry in xfRLPMSDCGainCurrent24hTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.24.1.1 | ColumnxfPMSDCGainCurrent24h0005dB | read-only | current | The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.24.1.2 | ColumnxfPMSDCGainCurrent24h0510dB | read-only | current | The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.24.1.3 | ColumnxfPMSDCGainCurrent24h1015dB | read-only | current | The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.24.1.4 | ColumnxfPMSDCGainCurrent24h1520dB | read-only | current | The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.24.1.5 | ColumnxfPMSDCGainCurrent24h2025dB | read-only | current | The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.24.1.6 | ColumnxfPMSDCGainCurrent24h2530dB | read-only | current | The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.25 | TablexfRLPMSDCGainInterval24hTable | not-accessible | current | This table collects the time spent in each SDC gain value for the 24 hours interval. |
| 1.3.6.1.4.1.193.81.3.4.1.1.25.1 | RowxfRLPMSDCGainInterval24hEntry | not-accessible | current | Entry in xfRLPMSDCGainInterval24hTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.25.1.1 | ColumnxfPMSDCGainInterval24h0005dB | read-only | current | The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.25.1.2 | ColumnxfPMSDCGainInterval24h0510dB | read-only | current | The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.25.1.3 | ColumnxfPMSDCGainInterval24h1015dB | read-only | current | The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.25.1.4 | ColumnxfPMSDCGainInterval24h1520dB | read-only | current | The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.25.1.5 | ColumnxfPMSDCGainInterval24h2025dB | read-only | current | The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.25.1.6 | ColumnxfPMSDCGainInterval24h2530dB | read-only | current | The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. |
| 1.3.6.1.4.1.193.81.3.4.1.1.26 | TablexfRLPMSDCGainConfigTable | not-accessible | current | xfRLPMSDCGainConfigTable contains thresholds for setting and resetting alarms for SDC Gain PM data in SDC current and interval tables. |
| 1.3.6.1.4.1.193.81.3.4.1.1.26.1 | RowxfRLPMSDCGainConfigEntry | not-accessible | current | Entry in xfRLPMSDCGainConfigTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.26.1.1 | ColumnxfPMSDCGainSetThreshold15m | read-write | current | The 15 minute set threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 180. |
| 1.3.6.1.4.1.193.81.3.4.1.1.26.1.2 | ColumnxfPMSDCGainSetThreshold24h | read-write | current | The 24 hour set threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 1500. |
| 1.3.6.1.4.1.193.81.3.4.1.1.26.1.3 | ColumnxfPMSDCGainResetThreshold15m | read-write | current | The 15 minute reset threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 20. |
| 1.3.6.1.4.1.193.81.3.4.1.1.26.1.4 | ColumnxfPMSDCGainStatus | read-only | current | Threshold crossing SDC alarm status. |
| 1.3.6.1.4.1.193.81.3.4.1.1.27 | TablexfRLExtRFPMConfigTable | not-accessible | current | This table contains the alarm threshold values for RL Extended RF PM. Its index id the RF IF ifIndex. |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1 | RowxfRLExtRFPMConfigEntry | not-accessible | current | Entry in the xfRLExtRFPMConfigTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.1 | ColumnxfExtRFPMRLTS1Threshold | read-write | current | RLTS1 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.9 ... -20.1 dBm] Valid for both 15 m & 24 h intervals. If changed… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.2 | ColumnxfExtRFPMSetThreshold15mRLTS1 | read-write | current | Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold f… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.3 | ColumnxfExtRFPMResetThreshold15mRLTS1 | read-write | current | Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.4 | ColumnxfExtRFPMRLTS2Threshold | read-write | current | RLTS2 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.8 ... -20.0 dBm] Valid for both 15 m & 24 h intervals. If changed… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.5 | ColumnxfExtRFPMSetThreshold15mRLTS2 | read-write | current | Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold f… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.6 | ColumnxfExtRFPMResetThreshold15mRLTS2 | read-write | current | Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.7 | ColumnxfExtRFPMSetThreshold15mRLTM | read-write | current | Receive Level Tide Mark (RLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Input Power in current 15 minute interval. RF inpu… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.8 | ColumnxfExtRFPMResetThreshold15mRLTM | read-write | current | Receive Level Tide Mark (RLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Input Power for entire current 15 minute interva… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.9 | ColumnxfExtRFPMTLTS1Threshold | read-write | current | TLTS1 Alarm Threshold for Maximum RF Output Power. RF output level = value dBm. Domain: [-100 ... 45 dBm] Valid for both 15 m & 24 h intervals. If changed curr… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.10 | ColumnxfExtRFPMSetThreshold15mTLTS1 | read-write | current | Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Thresh… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.11 | ColumnxfExtRFPMResetThreshold15mTLTS1 | read-write | current | Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Thre… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.12 | ColumnxfExtRFPMSetThreshold15mTLTM | read-write | current | Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Output Power in current 15 minute interval. RF… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.13 | ColumnxfExtRFPMResetThreshold15mTLTM | read-write | current | Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Output Power for entire current 15 minute in… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.14 | ColumnxfExtRFPMSetThreshold24hRLTS1 | read-write | current | Received Level 1 Threshold Second (RLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Thres… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.15 | ColumnxfExtRFPMSetThreshold24hRLTS2 | read-write | current | Received Level 2 Threshold Second (RLTS2) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Thres… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.16 | ColumnxfExtRFPMSetThreshold24hRLTM | read-write | current | Receive Level Tide Mark (RLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Input Power in current 24 hour interval. RF … |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.17 | ColumnxfExtRFPMSetThreshold24hTLTS1 | read-write | current | Transmitted Levels 1 Threshold Second (TLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm … |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.18 | ColumnxfExtRFPMSetThreshold24hTLTM | read-write | current | Transmitted Level Tide Mark (TLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Output Power in current 24 hour interval… |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.19 | ColumnxfExtRFPMStatus | read-only | current | Threshold alarm status |
| 1.3.6.1.4.1.193.81.3.4.1.1.27.1.20 | ColumnxfExtRFPMView | read-write | current | Enable/disable visibility of PM tables. Default value: extPmEnable(1) Near end access: read-write Far end access: No access |
| 1.3.6.1.4.1.193.81.3.4.1.1.28 | TablexfRLExtRFPMCurrent24hTable | not-accessible | current | Current 24h Extended RF PM table. Its index is RF IF ifIndex |
| 1.3.6.1.4.1.193.81.3.4.1.1.28.1 | RowxfRLExtRFPMCurrent24hEntry | not-accessible | current | Entry in the xfRLExtRFPMCurrent24hTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.28.1.1 | ColumnxfExtRFPMCurrent24hElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the age… |
| 1.3.6.1.4.1.193.81.3.4.1.1.28.1.2 | ColumnxfExtRFPMCurrent24hRLTS1 | read-only | current | Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the current 24 hour interval. -1 indicates … |
| 1.3.6.1.4.1.193.81.3.4.1.1.28.1.3 | ColumnxfExtRFPMCurrent24hRLTS2 | read-only | current | Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the current 24 hour interval. -1 indicates … |
| 1.3.6.1.4.1.193.81.3.4.1.1.28.1.4 | ColumnxfExtRFPMCurrent24hRLMin | read-only | current | Indicate Min RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The ins… |
| 1.3.6.1.4.1.193.81.3.4.1.1.28.1.5 | ColumnxfExtRFPMCurrent24hRLMax | read-only | current | Indicate Max RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The ins… |
| 1.3.6.1.4.1.193.81.3.4.1.1.28.1.6 | ColumnxfExtRFPMCurrent24hTLTS1 | read-only | current | Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the current 24 hour interval -1 indicat… |
| 1.3.6.1.4.1.193.81.3.4.1.1.28.1.7 | ColumnxfExtRFPMCurrent24hTLMin | read-only | current | Indicate Min RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are… |
| 1.3.6.1.4.1.193.81.3.4.1.1.28.1.8 | ColumnxfExtRFPMCurrent24hTLMax | read-only | current | Indicate Max RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are… |
| 1.3.6.1.4.1.193.81.3.4.1.1.29 | TablexfRLExtRFPMInterval24hTable | not-accessible | current | Interval 24h Extended RF PM table. Its index is RF IF ifIndex |
| 1.3.6.1.4.1.193.81.3.4.1.1.29.1 | RowxfRLExtRFPMInterval24hEntry | not-accessible | current | Entry in the xfRLExtRFPMInterval24hTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.29.1.1 | ColumnxfExtRFPMInterval24hRLTS1 | read-only | current | Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the previous 24 hour interval. -1 indicates… |
| 1.3.6.1.4.1.193.81.3.4.1.1.29.1.2 | ColumnxfExtRFPMInterval24hRLTS2 | read-only | current | Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the previous 24 hour interval. -1 indicates… |
| 1.3.6.1.4.1.193.81.3.4.1.1.29.1.3 | ColumnxfExtRFPMInterval24hRLMin | read-only | current | Indicate Min RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The in… |
| 1.3.6.1.4.1.193.81.3.4.1.1.29.1.4 | ColumnxfExtRFPMInterval24hRLMax | read-only | current | Indicate Max RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The in… |
| 1.3.6.1.4.1.193.81.3.4.1.1.29.1.5 | ColumnxfExtRFPMInterval24hTLTS1 | read-only | current | Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the previous 24 hour interval -1 indica… |
| 1.3.6.1.4.1.193.81.3.4.1.1.29.1.6 | ColumnxfExtRFPMInterval24hTLMin | read-only | current | Indicate Min RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances ar… |
| 1.3.6.1.4.1.193.81.3.4.1.1.29.1.7 | ColumnxfExtRFPMInterval24hTLMax | read-only | current | Indicate Max RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances ar… |
| 1.3.6.1.4.1.193.81.3.4.1.1.29.1.8 | ColumnxfExtRFPMInterval24hValidData | read-only | current | This variable indicates whether the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.1.1.30 | TablexfRLExtRFPMCurrent15mTable | not-accessible | current | Current 15m Extended RF PM table. Its index is RF IF ifIndex |
| 1.3.6.1.4.1.193.81.3.4.1.1.30.1 | RowxfRLExtRFPMCurrent15mEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.1.1.30.1.1 | ColumnxfExtRFPMCurrent15mElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.193.81.3.4.1.1.30.1.2 | ColumnxfExtRFPMCurrent15mRLTS1 | read-only | current | Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the current 15 minute interval. -1 indicat… |
| 1.3.6.1.4.1.193.81.3.4.1.1.30.1.3 | ColumnxfExtRFPMCurrent15mRLTS2 | read-only | current | Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the current 15 minute interval. -1 indicat… |
| 1.3.6.1.4.1.193.81.3.4.1.1.30.1.4 | ColumnxfExtRFPMCurrent15mRLMin | read-only | current | Indicate Min RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The i… |
| 1.3.6.1.4.1.193.81.3.4.1.1.30.1.5 | ColumnxfExtRFPMCurrent15mRLMax | read-only | current | Indicate Max RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The i… |
| 1.3.6.1.4.1.193.81.3.4.1.1.30.1.6 | ColumnxfExtRFPMCurrent15mTLTS1 | read-only | current | Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the current 15 minute interval -1 indi… |
| 1.3.6.1.4.1.193.81.3.4.1.1.30.1.7 | ColumnxfExtRFPMCurrent15mTLMin | read-only | current | Indicate Min RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances a… |
| 1.3.6.1.4.1.193.81.3.4.1.1.30.1.8 | ColumnxfExtRFPMCurrent15mTLMax | read-only | current | Indicate Max RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances a… |
| 1.3.6.1.4.1.193.81.3.4.1.1.31 | TablexfRLExtRFPMInterval15mTable | not-accessible | current | Interval 15m Extended RF PM table. Its index is RF IF ifIndex |
| 1.3.6.1.4.1.193.81.3.4.1.1.31.1 | RowxfRLExtRFPMInterval15mEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.1.1.31.1.1 | ColumnxfExtRFPMInterval15mIntervalNumber | read-only | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.193.81.3.4.1.1.31.1.2 | ColumnxfExtRFPMInterval15mRLTS1 | read-only | current | Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the previous 15 minute interval. -1 indica… |
| 1.3.6.1.4.1.193.81.3.4.1.1.31.1.3 | ColumnxfExtRFPMInterval15mRLTS2 | read-only | current | Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the previous 15 minute interval. -1 indica… |
| 1.3.6.1.4.1.193.81.3.4.1.1.31.1.4 | ColumnxfExtRFPMInterval15mRLMin | read-only | current | Indicate Min RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The … |
| 1.3.6.1.4.1.193.81.3.4.1.1.31.1.5 | ColumnxfExtRFPMInterval15mRLMax | read-only | current | Indicate Max RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The … |
| 1.3.6.1.4.1.193.81.3.4.1.1.31.1.6 | ColumnxfExtRFPMInterval15mTLTS1 | read-only | current | Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the previous 15 minute interval -1 ind… |
| 1.3.6.1.4.1.193.81.3.4.1.1.31.1.7 | ColumnxfExtRFPMInterval15mTLMin | read-only | current | Indicate Min RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances … |
| 1.3.6.1.4.1.193.81.3.4.1.1.31.1.8 | ColumnxfExtRFPMInterval15mTLMax | read-only | current | Indicate Max RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances … |
| 1.3.6.1.4.1.193.81.3.4.1.1.31.1.9 | ColumnxfExtRFPMInterval15mValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.1.1.32 | TablexfRLExtRAUPMCurrent24hTable | not-accessible | current | Current 24h Extended RAU PM table. Its index is RAU IF ifIndex |
| 1.3.6.1.4.1.193.81.3.4.1.1.32.1 | RowxfRLExtRAUPMCurrent24hEntry | not-accessible | current | Entry in the xfRLExtRAUPMCurrent24hTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.32.1.1 | ColumnxfExtRAUPMCurrent24hElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the age… |
| 1.3.6.1.4.1.193.81.3.4.1.1.32.1.2 | ColumnxfExtRAUPMCurrent24hMSEMin | read-only | current | Indicate Min MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are re… |
| 1.3.6.1.4.1.193.81.3.4.1.1.32.1.3 | ColumnxfExtRAUPMCurrent24hMSEMax | read-only | current | Indicate Max MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are re… |
| 1.3.6.1.4.1.193.81.3.4.1.1.32.1.4 | ColumnxfExtRAUPMCurrent24hXPIMin | read-only | current | Indicate Min Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid … |
| 1.3.6.1.4.1.193.81.3.4.1.1.32.1.5 | ColumnxfExtRAUPMCurrent24hXPIMax | read-only | current | Indicate Max Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid … |
| 1.3.6.1.4.1.193.81.3.4.1.1.33 | TablexfRLExtRAUPMInterval24hTable | not-accessible | current | Interval 24h Extended RAU PM table. Its index is RAU IF ifIndex |
| 1.3.6.1.4.1.193.81.3.4.1.1.33.1 | RowxfRLExtRAUPMInterval24hEntry | not-accessible | current | Entry in the xfRLExtRAUPMInterval24hTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.33.1.1 | ColumnxfExtRAUPMInterval24hMSEMin | read-only | current | Indicate Min MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are r… |
| 1.3.6.1.4.1.193.81.3.4.1.1.33.1.2 | ColumnxfExtRAUPMInterval24hMSEMax | read-only | current | Indicate Max MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are r… |
| 1.3.6.1.4.1.193.81.3.4.1.1.33.1.3 | ColumnxfExtRAUPMInterval24hXPIMin | read-only | current | Indicate Min Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid… |
| 1.3.6.1.4.1.193.81.3.4.1.1.33.1.4 | ColumnxfExtRAUPMInterval24hXPIMax | read-only | current | Indicate Max Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid… |
| 1.3.6.1.4.1.193.81.3.4.1.1.33.1.5 | ColumnxfExtRAUPMInterval24hValidData | read-only | current | This variable indicates whether the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.1.1.34 | TablexfRLExtRAUPMCurrent15mTable | not-accessible | current | Current 15m Extended RAU PM table. Its index is RF IF ifIndex |
| 1.3.6.1.4.1.193.81.3.4.1.1.34.1 | RowxfRLExtRAUPMCurrent15mEntry | not-accessible | current | Entry in the xfRLExtRAUPMCurrent15mTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.34.1.1 | ColumnxfExtRAUPMCurrent15mElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the age… |
| 1.3.6.1.4.1.193.81.3.4.1.1.34.1.2 | ColumnxfExtRAUPMCurrent15mMSEMin | read-only | current | Indicate Min MSE level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are … |
| 1.3.6.1.4.1.193.81.3.4.1.1.34.1.3 | ColumnxfExtRAUPMCurrent15mMSEMax | read-only | current | Indicate Max MSE level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are … |
| 1.3.6.1.4.1.193.81.3.4.1.1.34.1.4 | ColumnxfExtRAUPMCurrent15mXPIMin | read-only | current | Indicate Min Cross-Polar Interference (XPI) level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invali… |
| 1.3.6.1.4.1.193.81.3.4.1.1.34.1.5 | ColumnxfExtRAUPMCurrent15mXPIMax | read-only | current | Indicate Max Cross-Polar Interference (XPI) level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invali… |
| 1.3.6.1.4.1.193.81.3.4.1.1.35 | TablexfRLExtRAUPMInterval15mTable | not-accessible | current | Interval 15 Extended RAU PM table. Its index is RAU IF ifIndex |
| 1.3.6.1.4.1.193.81.3.4.1.1.35.1 | RowxfRLExtRAUPMInterval15mEntry | not-accessible | current | Entry in the xfRLExtRAUPMInterval15mTable. |
| 1.3.6.1.4.1.193.81.3.4.1.1.35.1.1 | ColumnxfExtRAUPMInterval15mIntervalNumber | read-only | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.193.81.3.4.1.1.35.1.2 | ColumnxfExtRAUPMInterval15mMSEMin | read-only | current | Indicate Min MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are… |
| 1.3.6.1.4.1.193.81.3.4.1.1.35.1.3 | ColumnxfExtRAUPMInterval15mMSEMax | read-only | current | Indicate Max MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are… |
| 1.3.6.1.4.1.193.81.3.4.1.1.35.1.4 | ColumnxfExtRAUPMInterval15mXPIMin | read-only | current | Indicate Min Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates inval… |
| 1.3.6.1.4.1.193.81.3.4.1.1.35.1.5 | ColumnxfExtRAUPMInterval15mXPIMax | read-only | current | Indicate Max Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates inval… |
| 1.3.6.1.4.1.193.81.3.4.1.1.35.1.6 | ColumnxfExtRAUPMInterval15mValidData | read-only | current | This variable indicates whether the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.1.2 | NodexfRadioLinkPtpTerminalConformance | |||
| 1.3.6.1.4.1.193.81.3.4.1.2.1 | NodexfRadioLinkPtpTerminalCompliances | |||
| 1.3.6.1.4.1.193.81.3.4.1.2.1.1 | CompliancexfRadioLinkPtpTerminalFullCompliance | current | The compliance statement for SNMP entities which implement everything. | |
| 1.3.6.1.4.1.193.81.3.4.1.2.2 | NodexfRadioLinkPtpTerminalGroups | |||
| 1.3.6.1.4.1.193.81.3.4.1.2.2.1 | GroupxfRadioLinkPtpTerminalCompleteGroup | current | A collection of all current objects in this MIB module. | |
| 1.3.6.1.4.1.193.81.3.4.1.2.2.2 | GroupxfRadioLinkPtpTerminalObsoleteGroup | obsolete | A collection of all obsolete objects in this MIB module. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ChannelMode | INTEGER { other(1), ccdp(2), accp(3), acap(4) } | current | Terminal channel mode |
| TermAdaptiveManualMode | INTEGER { other(1), disable(2), enable(3), enabledAsRequest(4) } | current | Adaptive Modulation mode |
| TermAutoRemoveLoopEnable | INTEGER { other(1), enable(2), disable(3) } | current | Auto Removal loops |
| TermModulation | INTEGER { other(1), cqpsk(2), qam16(3), qam128(4), qam32(5), qam64(6), qam4(7), qam8(8), qam256(9), qam512(10), qam1024(11) } | current | Channel Modulation |
| TermOutputPowerStatus | INTEGER { other(1), rtpc(2), atpc(3), localControl(4), ra1LocalControlRa2Rtpc(5), ra1RtpcRa2LocalControl(6) } | current | Output power mode |
| TermRauSec | INTEGER { other(0), sec2(1), sec4(2), sec5b(3) } | current | Spectrum Effeciency Class |