XF-RADIOLINK-RLT-MIB
369 objects
This MIB defines objects for Radio Link Terminal (RLT) and Carrier Termination (CT) for new Radio Link application in MINI-LINK TN supporting dual carrier capability.
Imported Objects
| ENTITY-MIB | entLogicalIndex entPhysicalIndex |
| HC-PerfHist-TC-MIB | HCPerfCurrentCount |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddressIPv6 |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| XF-TOP-MIB | xfRadioLink |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.81.3.4.5 | IdentityxfRadioLinkRltMIB | This MIB defines objects for Radio Link Terminal (RLT) and Carrier Termination (CT) for new Radio Link application in MINI-LINK TN supporting dual carrier capa… | ||
| 1.3.6.1.4.1.193.81.3.4.5.1 | NodexfRadioLinkRltObjects | |||
| 1.3.6.1.4.1.193.81.3.4.5.1.1 | TablexfChannelGroupTable | not-accessible | current | This table lists all relationships, for ech Channel Group (CG), between the Bonding/RLP interface and the RL WAN interface and allows to configure CG as either… |
| 1.3.6.1.4.1.193.81.3.4.5.1.1.1 | RowxfChannelGroupEntry | not-accessible | current | An entry in the xfChannelGroupTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.1.1.1 | ColumncgIfIndex | read-only | current | It is the ifIndex of WAN interface. The interface identified by atIfIndex is the same interface as identified by the same value of ifIndex. |
| 1.3.6.1.4.1.193.81.3.4.5.1.1.1.2 | ColumncgTypeIndex | read-only | current | Index representing the Channel Group interface type: - Bonding (2) - RLP: Radio Link Protection (3) |
| 1.3.6.1.4.1.193.81.3.4.5.1.1.1.3 | ColumnxfIfStatus | read-only | current | This object defines the Channel Group interface type: either Bonding or RLP (Radio Link Protection). Default: notReady |
| 1.3.6.1.4.1.193.81.3.4.5.1.2 | TablexfLIMappingTable | not-accessible | current | This table is used when navigating from a logical entity to interface, representing the relationship between: - RLT logical entity and either Bonding/RLP inter… |
| 1.3.6.1.4.1.193.81.3.4.5.1.2.1 | RowxfLIMappingEntry | not-accessible | current | An entry in the xfLIMappingTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.2.1.1 | ColumnliEntLogicalIndex | read-only | current | The value of this object uniquely identifies the logical entity: RLT (Radio Link Terminal) and CT (Carrier Termination). The logical entity identified by liEnt… |
| 1.3.6.1.4.1.193.81.3.4.5.1.2.1.2 | ColumnliIfIndex | read-only | current | It represents the ifIndex of Bonding/RLP interface and RAU IF. The interface identified by liIfIndex is the same interface as identified by the same value of i… |
| 1.3.6.1.4.1.193.81.3.4.5.1.2.1.3 | ColumnxfLIName | read-only | current | It represents the Name of the Radio Link Terminal (RLT) or Carrier Termination (CT). |
| 1.3.6.1.4.1.193.81.3.4.5.1.2.1.4 | ColumnxfLIIfDescr | read-only | current | A textual string containing information about the ifDescr of both Channel Group interface (either Bonding or RLP (Radio Link Protection)) and RAU IF interface. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3 | TablexfCarrierTerminationTable | not-accessible | current | This table is used to configure the Carrier Termination (CT). |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1 | RowxfCarrierTerminationEntry | not-accessible | current | An entry in the xfCarrierTerminationTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.1 | ColumnxfCarrierTermDistinguishedName | read-only | current | It represents the distinguished name of the Carrier Termination in the format Rack/Slot/CT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.2 | ColumnxfCarrierTermLabel | read-write | current | Label identifying the Carrier Termination. It can be freely set by operator to label the Carrier Termination. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.3 | ColumnxfCarrierTermOperStatus | read-only | current | It represents the operative status of the Carrier Termination: - down(2) - up(3) - degraded(4) - testing(5) |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.4 | ColumnxfCarrierTermRadioFrameId | read-write | current | It represents the selected Radio Frame ID. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.5 | ColumnxfCarrierTermPreamble | read-write | current | It allows to set different preambles in the radio frame of each Carrier Termination in a XPIC or MIMO configuration: - preambleA(2) - preambleB(3) - preambleC(… |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.6 | ColumnxfCarrierTermSelectedMinACM | read-write | current | It represents the selected minimum Tx ACM (Adaptive Code Modulation). |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.7 | ColumnxfCarrierTermActualACM | read-only | current | It represents the actual (current) Tx ACM (Adaptive Code Modulation). |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.8 | ColumnxfCarrierTermSelectedMaxACM | read-write | current | It represents the selected maximum Tx ACM (Adaptive Code Modulation). |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.9 | ColumnxfCarrierTermCapabilitiesLastChange | read-only | current | The value of sysUpTime at the time of the last creation or deletion of an entry in the xfCarrierTerminationCapabilityTable. If the number of entries has been u… |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.10 | ColumnxfCarrierTermReferenceSEC | read-write | current | Reference Spectrum Efficiency Class (SEC): - notSpecified(1): not configured, not possible to set - sec2(2): spectrum eff. Class 2 - sec4L(3): spectrum eff. Cl… |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.11 | ColumnxfCarrierTermWantedLicensedCapacity | read-write | current | It represents the wanted traffic licensed capacity on the Carrier Termination, expressed in Kbps. The default value 0 (i.e. disabled) means that no wanted lice… |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.12 | ColumnxfCarrierTermActualLicensedCapacity | read-only | current | This MO represents the Actual Licensed Capacity used on the Carrier Termination: - if Wanted Licensed Capacity is disabled (i.e. xfCarrierTermWantedLicensedCap… |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.13 | ColumnxfCarrierTermActualCapacity | read-only | current | It represents the actual transmitted capacity supported by Carrier Termination in Kbps. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.14 | ColumnxfCarrierTermPolarization | read-write | current | XPIC polarization, either horizontal or vertical. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.15 | ColumnxfCarrierTermXPICOperStatus | read-only | current | XPIC locking status: - Other(1): don't use - Locked(2): XPIC is locked: XPI valid - Unlocked(3): XPIC is not locked: XPI not valid - Mute(4): XPIC is muted (XP… |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.16 | ColumnxfCarrierTermMIMOOperStatus | read-only | current | MIMO locking status: - Other(1): don't use - Locked(2): MIMO is locked: XPI and SNIR valid - Unlocked(3): MIMO is not locked: XPI and SNIR not valid - Mute(4):… |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.17 | ColumnxfCarrierTermSNIR | read-only | current | Signal to Noise Interference Ratio (SNIR) in dB. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.18 | ColumnxfCarrierTermXPI | read-only | current | Cross-Polar Interference (XPI) level of the receiver in tenth of dB. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.19 | ColumnxfCarrierTermReset | read-write | current | Reset command forces all the Carrier Termination settings to their own default. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.20 | ColumnxfCarrierTermRestore | read-write | current | Restore command clears RFloop, IFloop and turns RAU transmitter on. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.21 | ColumnxfCarrierTermAutoRemoveLoopEnable | read-write | current | Auto remove all RL loops after 15 minutes. |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.22 | ColumnxfCarrierTermBerAlarmThreshold | read-write | current | Threshold for BER alarm. Default: ber1e3(2). |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.23 | ColumnxfCarrierTermActualRxACM | read-only | current | It represents the actual (current) Rx ACM (Adaptive Code Modulation). |
| 1.3.6.1.4.1.193.81.3.4.5.1.3.1.24 | ColumnxfCarrierTermFeCTSeverity | read-only | current | This object represents the highest severity of Far-End CT alarms and is populated only if Far-End terminal is represented by a Packet terminal (PT). Craft uses… |
| 1.3.6.1.4.1.193.81.3.4.5.1.4 | TablexfCarrierTerminationCapabilityTable | not-accessible | current | This table is used to configure the Carrier Termination (CT). |
| 1.3.6.1.4.1.193.81.3.4.5.1.4.1 | RowxfCarrierTerminationCapabilityEntry | not-accessible | current | An entry in the xfCarrierTerminationCapabilityTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.4.1.1 | ColumnxfRadioFrameId | read-only | current | It represents the Radio Frame Id. |
| 1.3.6.1.4.1.193.81.3.4.5.1.4.1.2 | ColumnxfChannelSpacing | read-only | current | Channel spacing: - ETSI: 3.5, 7, 14, 28, 40, 56, 112 MHz - ANSI: 10, 20, 30, 40, 50, 60, 80 MHz |
| 1.3.6.1.4.1.193.81.3.4.5.1.4.1.3 | ColumnxfFrameFormatType | read-only | current | It represents the Frame Format type: - Standard - XPIC - MIMO - Long Haul Standard - Long Haul XPIC - XPIC on two boards - Long Haul XPIC on two boards |
| 1.3.6.1.4.1.193.81.3.4.5.1.4.1.4 | ColumnxfMinACMCapacity | read-only | current | It represents the minimum capacity designed for the specific frame format (Radio Frame Id). |
| 1.3.6.1.4.1.193.81.3.4.5.1.4.1.5 | ColumnxfMaxACMCapacity | read-only | current | It represents the maximum capacity designed for the frame format (Radio Frame Id). |
| 1.3.6.1.4.1.193.81.3.4.5.1.4.1.6 | ColumnxfACMProfile | read-only | current | It specifies which adaptive code and modulation profiles are supported. |
| 1.3.6.1.4.1.193.81.3.4.5.1.5 | TablexfACMProfileCapacityTable | not-accessible | current | This tables reports the ACM capacities of the selected Radio Frame Id per each Carrier Termination. |
| 1.3.6.1.4.1.193.81.3.4.5.1.5.1 | RowxfACMProfileCapacityEntry | not-accessible | current | An entry in the xfACMProfileCapacityTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.5.1.1 | ColumnxfACMIndex | read-only | current | It represents the positional index of the bitmap xfACMProfile in xfCarrierTerminationCapabilityTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.5.1.2 | ColumnxfACMCapacity | read-only | current | It represents the capacity in Kbps of the ACM profile identified by the positional index xfACMIndex of the xfACMProfile in xfCarrierTerminationCapabilityTable.… |
| 1.3.6.1.4.1.193.81.3.4.5.1.6 | TablexfRLTTable | not-accessible | current | This table is used to configure the Radio Link Terminal (RLT). |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1 | RowxfRLTEntry | not-accessible | current | An entry in the xfRLTTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.1 | ColumnrltEntLogicalIndex | read-only | current | It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by rltEntLogicalIndex is the same entity as identified by the… |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.2 | ColumnxfRLTDistinguishedName | read-only | current | It represents the distinguished name of the Radio Link Terminal (RLT): Rack/Slot/RLT number. It is the ifName of RL-WAN i/f. |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.3 | ColumnxfRLTIpAddress | read-only | current | IPv4 address of the network element the Radio Link Terminal (RLT) belongs to. |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.4 | ColumnxfRLTIPv6Address | read-only | current | IPv6 Address of the network element the Radio Link Terminal (RLT) belongs to. |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.5 | ColumnxfRLTNeName | read-only | current | The name of the network element the Radio Link Terminal (RLT) belongs to (System Name - sysName). |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.6 | ColumnxfRLTNeType | read-only | current | The type of the network element the Radio Link Terminal (RLT) belongs to (System Descr - sysDescr). |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.7 | ColumnxfRLTId | read-write | current | Radio Link Terminal (RLT) identifier used for integrity check with far-end. |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.8 | ColumnxfRLTExpectedFarEndId | read-write | current | Expected Id of far-end Radio Link Terminal (RLT), used for integrity check with near-end. |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.9 | ColumnxfRLTFarEndIdCheck | read-write | current | When enabled, the system verifies that far-end Radio Link Terminal name is equal to the expected. If ok Radio Link Terminal status is UP. If not ok the Radio L… |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.10 | ColumnxfRLTStatus | read-only | current | It represents the operational status of the Radio Link Terminal (RLT). |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.11 | ColumnxfRLTMode | read-write | current | The mode of the Radio Link Terminal (RLT). Values: - 1+0: onePlusZero (default) - 1+1 RLP: onePlusOneRadioLinkProtection - 2+0 RLB: twoPlusZeroAdvancedRadioLin… |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.12 | ColumnxfRLTActualTXTotalCapacity | read-only | current | It represents the total transmitted capacity throughput (considering both Packet and TDM traffic), expressed in bps, of the Radio Link Terminal (RLT). |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.13 | ColumnxfRLTActualTXPacketCapacity | read-only | current | It represents the transmitted packet capacity throughput (only packet traffic), expressed in bps, of the Radio Link Terminal (RLT). |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.14 | ColumnxfRLTLimitedTotalCapacity | read-only | current | It represents the total transmitted capacity throughput (considering both Packet and TDM traffic), expressed in bps, of the Radio Link Terminal (RLT) limited b… |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.15 | ColumnxfRLTRltSeverity | read-only | current | This object represents the highest severity alarm related to RLT with logical index 'rltEntLogicalIndex'. Node GUI uses the Far-End entry value (of this MIB MO… |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.16 | ColumnxfRLTCapability | read-only | current | Each bit of this object represents an RLT capability: Bit 0 - XPIC capability Bit 1 - TDM capability Bit 2 - CsPlurality capability Bit 3 - CtAutoSelection cap… |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.17 | ColumnxfRLTInventoryLastChange | read-only | current | The value of sysUpTime at the time of the last creation or deletion of an entry in the xfRLTHierarchyModuleTable. If the current state was entered prior to the… |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.18 | ColumnxfRLTCpriMode | read-only | current | Set the mode of the CPRI front-haul product. Default: notApplicable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.19 | ColumnxfRLTReset | read-write | current | It resets RLT to default configuration. |
| 1.3.6.1.4.1.193.81.3.4.5.1.6.1.20 | ColumnxfRLTMeasuredHopLength | read-only | current | It represents the measured value of the radio hop length expressed in Km. Values: - Radio hop length measurement not yet available: -1; - Measured hop length i… |
| 1.3.6.1.4.1.193.81.3.4.5.1.7 | TablexfTrafficTable | not-accessible | current | This table is used to map the TDM interface to the specified RLT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.7.1 | RowxfTrafficEntry | not-accessible | current | An entry in the xfTrafficEntry. |
| 1.3.6.1.4.1.193.81.3.4.5.1.7.1.1 | ColumntrEntLogicalIndex | read-only | current | It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by trEntLogicalIndex is the same interface as identified by t… |
| 1.3.6.1.4.1.193.81.3.4.5.1.7.1.2 | ColumnxfTDMEnable | read-write | current | It allows to map TDM interface to a specific Radio Link Terminal (RLT). Default: disable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.8 | TablexfRLTDMIfTable | not-accessible | current | This table is an extention of the ifTable used to configure TDM interface. |
| 1.3.6.1.4.1.193.81.3.4.5.1.8.1 | RowxfRLTDMIfEntry | not-accessible | current | An entry in the xfRLTDMIfEntry. |
| 1.3.6.1.4.1.193.81.3.4.5.1.8.1.1 | ColumnxfRLTDMIfIndex | read-only | current | It is the ifIndex of RL TDM I/F table. |
| 1.3.6.1.4.1.193.81.3.4.5.1.8.1.2 | ColumnxfActualTDMCapacity | read-only | current | It represents the current tributary capacity. |
| 1.3.6.1.4.1.193.81.3.4.5.1.8.1.3 | ColumnxfWantedTDMAllocation | read-write | current | It represents the wanted tributary allocation. |
| 1.3.6.1.4.1.193.81.3.4.5.1.8.1.4 | ColumnxfActualTDMAllocation | read-only | current | It represents the actual tributary allocation. |
| 1.3.6.1.4.1.193.81.3.4.5.1.8.1.5 | ColumnxfTDMIfAlarms | read-only | current | This object shows TDM if related alarms. |
| 1.3.6.1.4.1.193.81.3.4.5.1.8.1.6 | ColumnxfTDMRxLoop | read-write | current | It configures TDM RX loop: - other(1) - enable(2) - disable(3) (default) |
| 1.3.6.1.4.1.193.81.3.4.5.1.8.1.7 | ColumnxfTDMDistinguishedName | read-only | current | It is the disinguished name of TDM i/f, i.e. R/S/P. |
| 1.3.6.1.4.1.193.81.3.4.5.1.8.1.8 | ColumnxfTDMMaxTributaries | read-only | current | It represents the maximum number of tributaries that can be allocated to TDM i/f, depending on frame ID, minimum ACM profile configured and licensed capacity i… |
| 1.3.6.1.4.1.193.81.3.4.5.1.8.1.9 | ColumnxfTDMHopLength | read-write | current | It represents the length of the radio hop expressed in Km. This is used to calculate the propagation delay over the radio hop that shall be compensated to guar… |
| 1.3.6.1.4.1.193.81.3.4.5.1.9 | TablexfCGIfTable | not-accessible | current | This table is an extension of ifTable reporting the main characteristics of CG i/f. |
| 1.3.6.1.4.1.193.81.3.4.5.1.9.1 | RowxfCGIfEntry | not-accessible | current | An entry in the xfCGIfEntry. |
| 1.3.6.1.4.1.193.81.3.4.5.1.9.1.1 | ColumnxfCGIfIndex | read-only | current | It is the ifIndex of CG interface. |
| 1.3.6.1.4.1.193.81.3.4.5.1.9.1.2 | ColumnxfCGIfMinSpeed | read-only | current | The minimum speed (throughput) of this interface expressed in bit/s, including both Ethernet and TDM capacities. Note: in case of bonding configurations, it re… |
| 1.3.6.1.4.1.193.81.3.4.5.1.9.1.3 | ColumnxfCGIfMaxSpeed | read-only | current | The maximum speed (throughput) of this interface expressed in bit/s, including both Ethernet and TDM capacities. Note: in case of bonding configurations, it re… |
| 1.3.6.1.4.1.193.81.3.4.5.1.9.1.4 | ColumnxfCGIfRCNum | read-only | current | Number of Carrier Termination members belonging to the CG group. |
| 1.3.6.1.4.1.193.81.3.4.5.1.9.1.5 | ColumnxfCGIfAlarms | read-only | current | This object shows CG i/f related alarms. |
| 1.3.6.1.4.1.193.81.3.4.5.1.9.1.6 | ColumnxfCGIfHopViewStatus | read-only | current | This object represents the Hop View status. Up: Far-End is reachable Down: Far-End not reachable The status is related to HCC-NE alarm. |
| 1.3.6.1.4.1.193.81.3.4.5.1.10 | TablexfXPICPairTable | not-accessible | current | This table is used to enable XPIC (Admid Status) and set the CT pair in XPIC. |
| 1.3.6.1.4.1.193.81.3.4.5.1.10.1 | RowxfXPICPairEntry | not-accessible | current | An entry in the xfXPICPairTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.10.1.1 | ColumnxpicPairEntLogicalIIndex | read-only | current | It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by xpicPairEntLogicalIIndex is the same entity as identified … |
| 1.3.6.1.4.1.193.81.3.4.5.1.10.1.2 | ColumnxfXPICPairAdminStatus | read-write | current | Administrative status of XPIC pair. Default value: disable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.10.1.3 | ColumnxfXPICPairNumber | read-write | current | It specifies the number used for identification of the XPIC pair. |
| 1.3.6.1.4.1.193.81.3.4.5.1.10.1.4 | ColumnxfXPICPairRecovery | read-write | current | It allows to enable/disable the recovery procedure when XPIC mode is enabled. |
| 1.3.6.1.4.1.193.81.3.4.5.1.10.1.5 | ColumnxfXPICPairRestore | read-write | current | Restore XPIC functionality after XPIC recovery has been triggered and resets XPIC Auto Restore procedure |
| 1.3.6.1.4.1.193.81.3.4.5.1.10.1.6 | ColumnxfXPICCTmember1 | read-write | current | It specifies the first Carrier Termination (CT) member of the XPIC pair. The member is identified by the CT distinguished name (R/S/P). |
| 1.3.6.1.4.1.193.81.3.4.5.1.10.1.7 | ColumnxfXPICCTmember2 | read-write | current | It specifies the second Carrier Termination (CT) member of the XPIC pair. The member is identified by the CT distinguished name (R/S/P). |
| 1.3.6.1.4.1.193.81.3.4.5.1.10.1.8 | ColumnxfXPICAutoRestore | read-write | current | It enable/disables the XPIC Auto Recovery procedure. |
| 1.3.6.1.4.1.193.81.3.4.5.1.10.1.9 | ColumnxfXpicPairIndex | read-only | current | It represents the table second index and is used to index the XPIC pair associated to Radio Link Terminal (RLT) with entLogicalIndex equal to xpicPairEntLogica… |
| 1.3.6.1.4.1.193.81.3.4.5.1.11 | TablexfMIMOGroupTable | not-accessible | current | This table is used to enable MIMO (Admid Status) and set the CTs in MIMO group. |
| 1.3.6.1.4.1.193.81.3.4.5.1.11.1 | RowxfMIMOGroupEntry | not-accessible | current | An entry in the xfMIMOGroupTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.11.1.1 | ColumnmimoGroupEntLogicalIIndex | read-only | current | It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by mimoGroupEntLogicalIIndex is the same entity as identified… |
| 1.3.6.1.4.1.193.81.3.4.5.1.11.1.2 | ColumnxfMIMOGroupAdminStatus | read-write | current | Administrative status of MIMO group. Default value: disable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.11.1.3 | ColumnxfMIMOGroupNumber | read-write | current | It specifies the Number used for identification of the MIMO group. |
| 1.3.6.1.4.1.193.81.3.4.5.1.11.1.4 | ColumnxfMIMOGroupRecovery | read-write | current | It allows to enable/disable the recovery procedure when MIMO mode is enabled. |
| 1.3.6.1.4.1.193.81.3.4.5.1.11.1.5 | ColumnxfMIMOGroupRestore | read-write | current | Restore MIMO functionality after MIMO recovery has been triggered. |
| 1.3.6.1.4.1.193.81.3.4.5.1.11.1.6 | ColumnxfMIMOCTmember1 | read-only | current | It specifies the first Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P). |
| 1.3.6.1.4.1.193.81.3.4.5.1.11.1.7 | ColumnxfMIMOCTmember2 | read-only | current | It specifies the second Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P). |
| 1.3.6.1.4.1.193.81.3.4.5.1.11.1.8 | ColumnxfMIMOCTmember3 | read-only | current | It specifies the third Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P). |
| 1.3.6.1.4.1.193.81.3.4.5.1.11.1.9 | ColumnxfMIMOCTmember4 | read-only | current | It specifies the forth Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P). |
| 1.3.6.1.4.1.193.81.3.4.5.1.12 | TablexfRLWANIfTable | not-accessible | current | This table is used to handle the RL-WAN i/f. |
| 1.3.6.1.4.1.193.81.3.4.5.1.12.1 | RowxfRLWANIfEntry | not-accessible | current | An entry in the xfRLWANIfTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.12.1.1 | ColumnxfRLWANIfIndex | read-only | current | It is the table index. It contains the ifIndex value of the WAN interface. |
| 1.3.6.1.4.1.193.81.3.4.5.1.12.1.2 | ColumnxfRLWANDistinguishedName | read-only | current | It is the name uniquely identifying the RL-WAN interface within the system, i.e. R/S/P. |
| 1.3.6.1.4.1.193.81.3.4.5.1.12.1.3 | ColumnxfRLWANCompAdminStatus | read-write | current | It enables and disables MLHC and PLC on the RL-WAN interface. down(2): both MLHC and PLC are disabled. mlhcUp(3): only MLHC is enabled. mlhcPlcUp(4): both MLHC… |
| 1.3.6.1.4.1.193.81.3.4.5.1.12.1.4 | ColumnxfRLWANCompConnStatus | read-only | current | It specifies if the compression building block is physically connected to the RL-WAN interface. Physical connection of the compression building block to the RL… |
| 1.3.6.1.4.1.193.81.3.4.5.1.12.1.5 | ColumnxfRLWANMlhcMplsMode | read-write | current | It specifies the wanted mpls mode. mplsOnly(2): Ethernet customer bridge, provider bridge and QinQ headers, including MPLS labels (up to 3) are compressed. con… |
| 1.3.6.1.4.1.193.81.3.4.5.1.12.1.6 | ColumnxfRLWANMlhcOperStatus | read-only | current | Multi-Layer Header Compression operative status. |
| 1.3.6.1.4.1.193.81.3.4.5.1.12.1.7 | ColumnxfRLWANPlcOperStatus | read-only | current | Payload Compression operative status. |
| 1.3.6.1.4.1.193.81.3.4.5.1.12.1.8 | ColumnxfRLWANActualCapacity | read-only | current | Actual Capacity (speed) of RL WAN interface, in bps. |
| 1.3.6.1.4.1.193.81.3.4.5.1.12.1.9 | ColumnxfRLWANLimitedCapacity | read-only | current | Capacity (speed) limited by license of RL WAN interface, in bps. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13 | TablexfRLTHierarchyModuleTable | not-accessible | current | This table is used to handle Module (MMU - RAU) hierarchy for the specific RLT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1 | RowxfRLTHierarchyModuleEntry | not-accessible | current | An entry in the xfRLTHierarchyModuleTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.1 | ColumnxfRLTMHIndex | read-only | current | It is the table index. It contains the entPhisycalIndex of the WAN port associated to the RLT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.2 | ColumnxfRLTModuleIndex | read-only | current | It is the table index. It is a sequential number referred to the module (entity), either MMU or RAU, constituting the RLT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.3 | ColumnxfRLTEntPhysicalIndex | read-only | current | This MO represents the value of entPhysicalIndex of the module, either MMU or RAU, constituting the RLT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.4 | ColumnxfRLTPhysicalCointainedIn | read-only | current | This MO represents the value of entPhysicalIndex for the physical entity which 'contains' this physical entity, which is either MMU or RAU (constituting the RL… |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.5 | ColumnxfRLTPhysicalParentRelPos | read-only | current | This MO represents the indication of the relative position of this 'child' component among all its 'sibling' components. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.6 | ColumnxfRLTEntityPhysicalDescr | read-only | current | This MO represents a textual description of physical entity (module), either MMU or RAU, constituting the RLT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.7 | ColumnxfRLTModuleSlotPosition | read-only | current | This MO represents the slot position of the physical entity (module), either MMU or RAU, constituting the RLT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.8 | ColumnxfRLTFEDistinguishedName | read-only | current | This MO represents the distinguished name of the Near-End logical entity, either RLT or CT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.9 | ColumnxfRLTNEDistinguishedName | read-only | current | This MO represents the distinguished name of the Far-End logical entity, either RLT or CT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.10 | ColumnxfRLTInterfaceIndex | read-only | current | This MO represents the value of ifIndex of the interface, either CG IF (Bonding/RLP) or RAU IF, constituting the RLT. |
| 1.3.6.1.4.1.193.81.3.4.5.1.13.1.11 | ColumnxfRLTHighestSeverityAlarm | read-only | current | This MO reports the highest severity of the alarms active in the physical module, MMU or RAU, it refers to. Value list: - critical(0): highest severity is Crit… |
| 1.3.6.1.4.1.193.81.3.4.5.1.14 | TablexfRLTProtectionTable | not-accessible | current | This table is used to handle RL Protection for the RLT whose mode is set 1+1RLP. |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1 | RowxfRLTProtectionEntry | not-accessible | current | An entry in the xfRLTProtectionTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.1 | ColumnxfRLTProtIndex | read-only | current | It is the table index. It contains the entity logical index of the RLT configured in 1+1RLP. |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.2 | ColumnxfRLTProtectionSwitchMode | read-write | current | The mode in which the switching mechanism is configured. Auto: System automatically switches from the degraded to the other transmitter (Tx). Manual: Automatic… |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.3 | ColumnxfRLTProtectionStatus | read-only | current | Status of the protection, when configured in a protected mode. Values: - unprotected; - protected - unableToProtect Note: Applicable only when RLT-mode is RL p… |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.4 | ColumnxfRLTRevertivePreferredTX | read-write | current | It specifies the preferred TX Radio Carrier Termination (CT) in revertive protection mode. The member is identified by the CT distinguished name (R/S/P). |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.5 | ColumnxfRLTProtectionWaitToRestoreTime | read-write | current | The time, in # of seconds, to wait before switching back to the preferred Tx in Auto & Revertive mode. Default: 0. |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.6 | ColumnxfRLTFadeNotificationTimer | read-write | current | Notifications for alarms caused by fading, with a duration less than the specified time (0 - 1000 seconds) are not sent. Only applicable for protected configur… |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.7 | ColumnxfRLTManualSwitchCommand | read-write | current | Used to request a TX switch-over. Applicable for protected configurations and when protectionSwitchMode is set to Manual. Not Applicable for RLT mode RLB Value… |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.8 | ColumnxfRLTTxSwitchOverConfiguration | read-write | current | Enable or disable the function to switch TX on a request from far-end, including also the TX switchover alarm notifications , both local and remote. Only appli… |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.9 | ColumnxfRLTTxSwitchOverAlarmReset | read-write | current | Used to manual reset the TX switch-over alarm and Remote TX switchover alarm (consequently to TX switch ordered from far-end). Note: the alarm is raised when T… |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.10 | ColumnxfRLTNumOfRLPSwitch | read-only | current | It represents the number of RLP Radio TX switch. |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.11 | ColumnxfRLTEnhancedACMProtectionMode | read-write | current | It configures the enhanced ACM protection mode. The enhanced ACM protection uses RX indicators from both the working and the protection links to select an ACM … |
| 1.3.6.1.4.1.193.81.3.4.5.1.14.1.12 | ColumnxfRLTEnhancedACMProtectionOperStatus | read-only | current | Status of the enhanched ACM protection engine, when ACM engine is configured either in maximum-troughtput or maximum-protection mode. Values: - notApplicable :… |
| 1.3.6.1.4.1.193.81.3.4.5.1.15 | TablexfRLTEncryptionTable | not-accessible | current | This table is used to handle Radio Link Encryption. |
| 1.3.6.1.4.1.193.81.3.4.5.1.15.1 | RowxfRLTEncryptionEntry | not-accessible | current | An entry in the xfRLTEncryptionTable. |
| 1.3.6.1.4.1.193.81.3.4.5.1.15.1.1 | ColumnxfRLTEncryptionIndex | read-only | current | It represents the xfRLTEncryptionTable index and is the RLT entity logical index. |
| 1.3.6.1.4.1.193.81.3.4.5.1.15.1.2 | ColumnxfRLTEncryptionAdminStatus | read-write | current | This MO allows to enable/disable the Encryption of both control and traffic plain over the Radio Link hop. Values: - enable; - disable. Default: DISABLE. |
| 1.3.6.1.4.1.193.81.3.4.5.1.15.1.3 | ColumnxfRLTEncryptionOperStatus | read-only | current | This MO represents the Operative Status of the Encryption function over the Radio Link hop and refers to receiving direction. Therefore, it indicates if the re… |
| 1.3.6.1.4.1.193.81.3.4.5.1.15.1.4 | ColumnxfRLTEncryptionMasterKey | read-write | current | This MO allows to define the Master Key used to initiate the Encryption operation. Master Key is hidden. |
| 1.3.6.1.4.1.193.81.3.4.5.2 | NodexfRadioLinkRltPmObjects | |||
| 1.3.6.1.4.1.193.81.3.4.5.2.1 | TablexfRLPMContinuousCounterTable | not-accessible | current | Table for RLT performance data. |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1 | RowxfRLPMContinuousCounterEntry | not-accessible | current | An entry in the xfRLPMContinuousCounterTable. |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1.1 | ColumnxfPMTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the age… |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1.2 | ColumnxfPMCurrentES | read-only | current | This object shows the errored seconds. Reset by xfPMPerfReset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1.3 | ColumnxfPMCurrentSES | read-only | current | This object shows the severely errored seconds. Reset by xfPMPerfReset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1.4 | ColumnxfPMCurrentBBE | read-only | current | This object shows the background block errors. Reset by xfPMPerfReset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1.5 | ColumnxfPMCurrentUAS | read-only | current | This object shows the unavailable seconds (or unavailable time). Reset by xfPMPerfReset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1.6 | ColumnxfPMCurrentBB | read-only | current | This object shows the background blocks. Reset by xfPMPerfReset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1.7 | ColumnxfPMPerfReset | read-write | current | This object is used to reset the performance counters: - Elapsed Time, ES, SES, BBE, BB - PM ACM - ETSI - EN 301 129 (TLTS, RLTS, ...) current/interval 15m/24h… |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1.8 | ColumnxfPMCurrentESR | read-only | current | The ratio of ES to total seconds in available time during a fixed measurement interval. Reset by xfPMPerfReset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1.9 | ColumnxfPMCurrentSESR | read-only | current | The ratio of SES to total seconds in available time during a fixed measurement interval. Reset by xfPMPerfReset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.1.1.10 | ColumnxfPMCurrentBBER | read-only | current | The ratio of Background Block Errors (BBE) to total blocks in available time during a fixed measurement interval. Reset by xfPMPerfReset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.2 | TablexfRLPMACMConfigTable | not-accessible | current | Alarm threshold values for RL PM. |
| 1.3.6.1.4.1.193.81.3.4.5.2.2.1 | RowxfRLPMACMConfigEntry | not-accessible | current | Entry in the xfRLPMACMConfigTable |
| 1.3.6.1.4.1.193.81.3.4.5.2.2.1.1 | ColumnxfPMACMSetThreshold15m | read-write | current | The 15 minute set threshold for minimum modulation. Near end access: read-write. Far end access: no access. Default value is 180. |
| 1.3.6.1.4.1.193.81.3.4.5.2.2.1.2 | ColumnxfPMACMSetThreshold24h | read-write | current | The 24 hour set threshold for minimum modulation. Near end access: read-write. Far end access: no access. Default value is 1500. |
| 1.3.6.1.4.1.193.81.3.4.5.2.2.1.3 | ColumnxfPMACMResetThreshold15m | read-write | current | The 15 minute reset threshold for minimum modulation. Near end access: read-write. Far end access: no access. Default value is 20. |
| 1.3.6.1.4.1.193.81.3.4.5.2.2.1.4 | ColumnxfPMACMStatus | read-only | current | It reports threshold crossing alarm status: - acm15m: ACM 15 min threshold crossing: ACM has been in the lowest configured profile for a number of seconds exce… |
| 1.3.6.1.4.1.193.81.3.4.5.2.2.1.5 | ColumnxfPMACMValidData | read-only | current | It reports which ACM's PM data are valid. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3 | TablexfRLPMACMCurrent24hTable | not-accessible | current | ACM-based counters for current 24h table. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1 | RowxfRLPMACMCurrent24hEntry | not-accessible | current | Entry in the xfRLPMACMCurrent24hTable. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.1 | ColumnxfPMACMCurrent24h4QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.2 | ColumnxfPMACMCurrent24h4QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.3 | ColumnxfPMACMCurrent24h4QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.4 | ColumnxfPMACMCurrent24h16QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.5 | ColumnxfPMACMCurrent24h16QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.6 | ColumnxfPMACMCurrent24h16QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.7 | ColumnxfPMACMCurrent24h32QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.8 | ColumnxfPMACMCurrent24h32QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.9 | ColumnxfPMACMCurrent24h32QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.10 | ColumnxfPMACMCurrent24h64QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.11 | ColumnxfPMACMCurrent24h64QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.12 | ColumnxfPMACMCurrent24h64QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.13 | ColumnxfPMACMCurrent24h128QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.14 | ColumnxfPMACMCurrent24h128QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.15 | ColumnxfPMACMCurrent24h128QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.16 | ColumnxfPMACMCurrent24h256QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.17 | ColumnxfPMACMCurrent24h256QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.18 | ColumnxfPMACMCurrent24h256QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.19 | ColumnxfPMACMCurrent24h512QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.20 | ColumnxfPMACMCurrent24h512QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.21 | ColumnxfPMACMCurrent24h512QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.22 | ColumnxfPMACMCurrent24h1024QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.23 | ColumnxfPMACMCurrent24h1024QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.24 | ColumnxfPMACMCurrent24h1024QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.25 | ColumnxfPMACMCurrent24h2048QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.26 | ColumnxfPMACMCurrent24h2048QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.27 | ColumnxfPMACMCurrent24h2048QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.28 | ColumnxfPMACMCurrent24h4096QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.29 | ColumnxfPMACMCurrent24h4096QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.30 | ColumnxfPMACMCurrent24h4096QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.31 | ColumnxfPMACMCurrent24h8192QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.32 | ColumnxfPMACMCurrent24h8192QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.33 | ColumnxfPMACMCurrent24h8192QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.34 | ColumnxfPMACMCurrent24h16384QAMStrong | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.35 | ColumnxfPMACMCurrent24h16384QAMStd | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.3.1.36 | ColumnxfPMACMCurrent24h16384QAMLight | read-only | current | Valid time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4 | TablexfRLPMACMInterval24hTable | not-accessible | current | ACM-based counters for interval 24h table. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1 | RowxfRLPMACMInterval24hEntry | not-accessible | current | Entry in the xfRLPMACMInterval24hTable. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.1 | ColumnxfPMACMInterval24h4QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.2 | ColumnxfPMACMInterval24h4QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.3 | ColumnxfPMACMInterval24h4QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.4 | ColumnxfPMACMInterval24h16QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.5 | ColumnxfPMACMInterval24h16QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.6 | ColumnxfPMACMInterval24h16QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.7 | ColumnxfPMACMInterval24h32QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.8 | ColumnxfPMACMInterval24h32QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.9 | ColumnxfPMACMInterval24h32QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.10 | ColumnxfPMACMInterval24h64QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.11 | ColumnxfPMACMInterval24h64QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.12 | ColumnxfPMACMInterval24h64QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.13 | ColumnxfPMACMInterval24h128QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.14 | ColumnxfPMACMInterval24h128QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.15 | ColumnxfPMACMInterval24h128QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.16 | ColumnxfPMACMInterval24h256QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.17 | ColumnxfPMACMInterval24h256QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.18 | ColumnxfPMACMInterval24h256QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.19 | ColumnxfPMACMInterval24h512QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.20 | ColumnxfPMACMInterval24h512QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.21 | ColumnxfPMACMInterval24h512QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.22 | ColumnxfPMACMInterval24h1024QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.23 | ColumnxfPMACMInterval24h1024QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.24 | ColumnxfPMACMInterval24h1024QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.25 | ColumnxfPMACMInterval24h2048QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.26 | ColumnxfPMACMInterval24h2048QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.27 | ColumnxfPMACMInterval24h2048QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.28 | ColumnxfPMACMInterval24h4096QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.29 | ColumnxfPMACMInterval24h4096QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.30 | ColumnxfPMACMInterval24h4096QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.31 | ColumnxfPMACMInterval24hValidData | read-only | current | This variable indicates whether the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.32 | ColumnxfPMACMInterval24h8192QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.33 | ColumnxfPMACMInterval24h8192QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.34 | ColumnxfPMACMInterval24h8192QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.35 | ColumnxfPMACMInterval24h16384QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.36 | ColumnxfPMACMInterval24h16384QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.4.1.37 | ColumnxfPMACMInterval24h16384QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5 | TablexfRLPMACMCurrent15mTable | not-accessible | current | ACM-based counters for current 15m table. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1 | RowxfRLPMACMCurrent15mEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.1 | ColumnxfPMACMCurrent15m4QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.2 | ColumnxfPMACMCurrent15m4QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.3 | ColumnxfPMACMCurrent15m4QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.4 | ColumnxfPMACMCurrent15m16QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.5 | ColumnxfPMACMCurrent15m16QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.6 | ColumnxfPMACMCurrent15m16QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.7 | ColumnxfPMACMCurrent15m32QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.8 | ColumnxfPMACMCurrent15m32QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.9 | ColumnxfPMACMCurrent15m32QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.10 | ColumnxfPMACMCurrent15m64QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.11 | ColumnxfPMACMCurrent15m64QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.12 | ColumnxfPMACMCurrent15m64QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.13 | ColumnxfPMACMCurrent15m128QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.14 | ColumnxfPMACMCurrent15m128QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.15 | ColumnxfPMACMCurrent15m128QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.16 | ColumnxfPMACMCurrent15m256QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.17 | ColumnxfPMACMCurrent15m256QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.18 | ColumnxfPMACMCurrent15m256QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.19 | ColumnxfPMACMCurrent15m512QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.20 | ColumnxfPMACMCurrent15m512QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.21 | ColumnxfPMACMCurrent15m512QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.22 | ColumnxfPMACMCurrent15m1024QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.23 | ColumnxfPMACMCurrent15m1024QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.24 | ColumnxfPMACMCurrent15m1024QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.25 | ColumnxfPMACMCurrent15m2048QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.26 | ColumnxfPMACMCurrent15m2048QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.27 | ColumnxfPMACMCurrent15m2048QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.28 | ColumnxfPMACMCurrent15m4096QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.29 | ColumnxfPMACMCurrent15m4096QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.30 | ColumnxfPMACMCurrent15m4096QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.31 | ColumnxfPMACMCurrent15m8192QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.32 | ColumnxfPMACMCurrent15m8192QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.33 | ColumnxfPMACMCurrent15m8192QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.34 | ColumnxfPMACMCurrent15m16384QAMStrong | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.35 | ColumnxfPMACMCurrent15m16384QAMStd | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.5.1.36 | ColumnxfPMACMCurrent15m16384QAMLight | read-only | current | Valid interval time since reset. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6 | TablexfRLPMACMInterval15mTable | not-accessible | current | ACM-based counters for interval 15m table. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1 | RowxfRLPMACMInterval15mEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.1 | ColumnxfPMACMInterval15mIntervalNumber | read-only | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.2 | ColumnxfPMACMInterval15m4QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.3 | ColumnxfPMACMInterval15m4QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.4 | ColumnxfPMACMInterval15m4QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.5 | ColumnxfPMACMInterval15m16QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.6 | ColumnxfPMACMInterval15m16QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.7 | ColumnxfPMACMInterval15m16QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.8 | ColumnxfPMACMInterval15m32QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.9 | ColumnxfPMACMInterval15m32QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.10 | ColumnxfPMACMInterval15m32QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.11 | ColumnxfPMACMInterval15m64QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.12 | ColumnxfPMACMInterval15m64QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.13 | ColumnxfPMACMInterval15m64QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.14 | ColumnxfPMACMInterval15m128QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.15 | ColumnxfPMACMInterval15m128QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.16 | ColumnxfPMACMInterval15m128QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.17 | ColumnxfPMACMInterval15m256QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.18 | ColumnxfPMACMInterval15m256QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.19 | ColumnxfPMACMInterval15m256QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.20 | ColumnxfPMACMInterval15m512QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.21 | ColumnxfPMACMInterval15m512QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.22 | ColumnxfPMACMInterval15m512QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.23 | ColumnxfPMACMInterval15m1024QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.24 | ColumnxfPMACMInterval15m1024QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.25 | ColumnxfPMACMInterval15m1024QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.26 | ColumnxfPMACMInterval15m2048QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.27 | ColumnxfPMACMInterval15m2048QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.28 | ColumnxfPMACMInterval15m2048QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.29 | ColumnxfPMACMInterval15m4096QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.30 | ColumnxfPMACMInterval15m4096QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.31 | ColumnxfPMACMInterval15m4096QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.32 | ColumnxfPMACMInterval15mValidData | read-only | current | This variable indicates whether the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.33 | ColumnxfPMACMInterval15m8192QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.34 | ColumnxfPMACMInterval15m8192QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.35 | ColumnxfPMACMInterval15m8192QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.36 | ColumnxfPMACMInterval15m16384QAMStrong | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.37 | ColumnxfPMACMInterval15m16384QAMStd | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.6.1.38 | ColumnxfPMACMInterval15m16384QAMLight | read-only | current | Interval count. |
| 1.3.6.1.4.1.193.81.3.4.5.2.7 | TablexfRLPMMimoCurrentTable | not-accessible | current | Table for RLT MIMO Current performance data. |
| 1.3.6.1.4.1.193.81.3.4.5.2.7.1 | RowxfRLPMMimoCurrentEntry | not-accessible | current | An entry in the xfRLPMMimoCurrentTable. |
| 1.3.6.1.4.1.193.81.3.4.5.2.7.1.1 | ColumnxfPMPerfCurrentEta | read-only | current | Performance Monitoring for Current MIMO Eta Value. |
| 1.3.6.1.4.1.193.81.3.4.5.2.7.1.2 | ColumnxfPMPerfEtaMinLast7days | read-only | current | Indicate ETA Min level for the last 7 days. |
| 1.3.6.1.4.1.193.81.3.4.5.2.7.1.3 | ColumnxfPMPerfEtaMaxLast7days | read-only | current | Indicate ETA Max level for the last 7 days. |
| 1.3.6.1.4.1.193.81.3.4.5.2.8 | TablexfRLPMMimoCurrent24hTable | not-accessible | current | Counters for Eta in current 24h. |
| 1.3.6.1.4.1.193.81.3.4.5.2.8.1 | RowxfRLPMMimoCurrent24hEntry | not-accessible | current | Entry in the xfRLPMMimoCurrent24hTable. |
| 1.3.6.1.4.1.193.81.3.4.5.2.8.1.1 | ColumnxfPMPerfCurrent24hElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.193.81.3.4.5.2.8.1.2 | ColumnxfPMPerfCurrent24hEtaMin | read-only | current | Performance Monitoring for MIMO Eta Min Value in Current 24h. |
| 1.3.6.1.4.1.193.81.3.4.5.2.8.1.3 | ColumnxfPMPerfCurrent24hEtaMax | read-only | current | Performance Monitoring for Current MIMO 24h Eta Max Value. |
| 1.3.6.1.4.1.193.81.3.4.5.2.9 | TablexfRLPMMimoInterval24hTable | not-accessible | current | Performance Monitoring for MIMO Eta Min Value in Interval of 24h. |
| 1.3.6.1.4.1.193.81.3.4.5.2.9.1 | RowxfRLPMMimoInterval24hEntry | not-accessible | current | Entry in the xfRLPMMimoInterval24hTable. |
| 1.3.6.1.4.1.193.81.3.4.5.2.9.1.1 | ColumnxfPMPerfInterval24hValidData | read-only | current | This variable indicates whether the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.5.2.9.1.2 | ColumnxfPMPerfInterval24hEtaMin | read-only | current | Performance Monitoring for MIMO Eta Min Value in Interval of 24h. |
| 1.3.6.1.4.1.193.81.3.4.5.2.9.1.3 | ColumnxfPMPerfInterval24hEtaMax | read-only | current | Performance Monitoring for MIMO Eta Max Value in Interval of 24h. |
| 1.3.6.1.4.1.193.81.3.4.5.2.10 | TablexfRLPMMimoCurrent15mTable | not-accessible | current | Counters for Eta MIMO Current 15m table. |
| 1.3.6.1.4.1.193.81.3.4.5.2.10.1 | RowxfRLPMMimoCurrent15mEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.5.2.10.1.1 | ColumnxfPMPerfCurrent15mElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period |
| 1.3.6.1.4.1.193.81.3.4.5.2.10.1.2 | ColumnxfPMPerfCurrent15mEtaMin | read-only | current | Performance Monitoring for MIMO Eta Min Value in Current 15m. |
| 1.3.6.1.4.1.193.81.3.4.5.2.10.1.3 | ColumnxfPMPerfCurrent15mEtaMax | read-only | current | Performance Monitoring for MIMO Eta Max Value in Current 15m. |
| 1.3.6.1.4.1.193.81.3.4.5.2.11 | TablexfRLPMMimoInterval15mTable | not-accessible | current | Counters for Eta MIMO for Interval 15m. |
| 1.3.6.1.4.1.193.81.3.4.5.2.11.1 | RowxfRLPMMimoInterval15mEntry | not-accessible | current | Entry in the table. |
| 1.3.6.1.4.1.193.81.3.4.5.2.11.1.1 | ColumnxfPMPerfInterval15mIntervalNumber | read-only | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.193.81.3.4.5.2.11.1.2 | ColumnxfPMPerfInterval15mEtaMin | read-only | current | Performance Monitoring for MIMO Eta Min Value in Interval 15m. |
| 1.3.6.1.4.1.193.81.3.4.5.2.11.1.3 | ColumnxfPMPerfInterval15mEtaMax | read-only | current | Performance Monitoring for MIMO Eta Max Value in Interval 15m. |
| 1.3.6.1.4.1.193.81.3.4.5.2.11.1.4 | ColumnxfPMPerfInterval15mValidData | read-only | current | This variable indicates whether the data for this interval is valid. |
| 1.3.6.1.4.1.193.81.3.4.5.3 | NodexfRadioLinkRltConformance | |||
| 1.3.6.1.4.1.193.81.3.4.5.3.1 | NodexfRadioLinkRltCompliances | |||
| 1.3.6.1.4.1.193.81.3.4.5.3.1.1 | CompliancexfRadioLinkRltFullCompliance | current | The compliance statement for SNMP entities which implement everything. | |
| 1.3.6.1.4.1.193.81.3.4.5.3.2 | NodexfRadioLinkRltGroups | |||
| 1.3.6.1.4.1.193.81.3.4.5.3.2.1 | GroupxfRadioLinkRltCompleteGroup | current | A collection of all current objects in this MIB module |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CarrierTermACMIndex | INTEGER { acm4QAMStrong(1), acm4QAMStd(2), acm4QAMLight(3), acm16QAMStrong(4), acm16QAMStd(5), acm16QAMLight(6), acm32QAMStrong(7), acm32QAMStd(8), acm32QAMLight(9), acm64QAMStrong(10), acm64QAMStd(11), acm64QAMLight(12), acm128QAMStrong(13), acm128QAMStd(14), acm128QAMLight(15), acm256QAMStrong(16), acm256QAMStd(17), acm256QAMLight(18), acm512QAMStrong(19), acm512QAMStd(20), acm512QAMLight(21), acm1024QAMStrong(22), acm1024QAMStd(23), acm1024QAMLight(24), acm2048QAMStrong(25), acm2048QAMStd(26), acm2048QAMLight(27), acm4096QAMStrong(28), acm4096QAMStd(29), acm4096QAMLight(30), acm8192QAMStrong(31), acm8192QAMStd(32), acm8192QAMLight(33), acm16384QAMStrong(34), acm16384QAMStd(35), acm16384QAMLight(36) } | current | This TC enumerates all possible ACM index values. |