XYLAN-BACKUP-MIB
17 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.16.1 | NodebackupxConfigGroup | |||
| 1.3.6.1.4.1.800.2.16.1.1 | TablebackupxConfigTable | not-accessible | mandatory | A table of Backup Services configuration information. |
| 1.3.6.1.4.1.800.2.16.1.1.1 | RowbackupxConfigEntry | not-accessible | mandatory | An entry in the Backup Service Entity Configuration table, containing information about a backup service. |
| 1.3.6.1.4.1.800.2.16.1.1.1.1 | ColumnbackupxConfigID | read-only | mandatory | The Backup Service ID. This is used as a unique ID to identify a backup service entity. |
| 1.3.6.1.4.1.800.2.16.1.1.1.2 | ColumnbackupxConfigDescription | read-write | mandatory | A description for this Backup Service. |
| 1.3.6.1.4.1.800.2.16.1.1.1.3 | ColumnbackupxConfigAdminStatus | read-write | mandatory | This object controls the Administrative Status of this Backup Service. Enabled will allow the Backup Service to operate. Disabled will disable the service with… |
| 1.3.6.1.4.1.800.2.16.1.1.1.4 | ColumnbackupxConfigPrimaryType | read-write | mandatory | This object controls the type of entity to be backed up in case of failure. |
| 1.3.6.1.4.1.800.2.16.1.1.1.5 | ColumnbackupxConfigPrimaryIndex1 | read-write | mandatory | This object controls the first Index object to use to identify the Primary entity to backup based on type: Physical Port: slot Frame Relay PVC: slot |
| 1.3.6.1.4.1.800.2.16.1.1.1.6 | ColumnbackupxConfigPrimaryIndex2 | read-write | mandatory | This object controls the first Index object to use to identify the Primary entity to backup based on type: Physical Port: port Frame Relay PVC: port |
| 1.3.6.1.4.1.800.2.16.1.1.1.7 | ColumnbackupxConfigPrimaryIndex3 | read-write | mandatory | This object controls the first Index object to use to identify the Primary entity to backup based on type: Physical Port: 0 Frame Relay PVC: DLCI number |
| 1.3.6.1.4.1.800.2.16.1.1.1.8 | ColumnbackupxConfigBackupType | read-write | mandatory | This object controls the type of entity to use to back up the primary entity in case of failure. |
| 1.3.6.1.4.1.800.2.16.1.1.1.9 | ColumnbackupxConfigBackupIndex1 | read-write | mandatory | This object controls the first Index object to use to identify the backup entity based on type: PPP Peer: Peer ID |
| 1.3.6.1.4.1.800.2.16.1.1.1.10 | ColumnbackupxConfigBackupIndex2 | read-write | mandatory | This object controls the second Index object to use to identify the backup entity: This object is currently reserved for possible future use. |
| 1.3.6.1.4.1.800.2.16.1.1.1.11 | ColumnbackupxConfigBackupIndex3 | read-write | mandatory | This object controls the third Index object to use to identify the backup entity: This object is currently reserved for possible future use. |
| 1.3.6.1.4.1.800.2.16.1.1.1.12 | ColumnbackupxConfigStartupTimeout | read-write | mandatory | This object controls the time in seconds after system startup to wait for the Primary entity to come up before activating the backup entity. |
| 1.3.6.1.4.1.800.2.16.1.1.1.13 | ColumnbackupxConfigActivateTimeout | read-write | mandatory | This object controls the time in seconds after the Primary entity enters and stays in a Failed state before activating the backup entity. |
| 1.3.6.1.4.1.800.2.16.1.1.1.14 | ColumnbackupxConfigRestoreTimeout | read-write | mandatory | This object controls the time in seconds after the Primary entity enters and stays in a Operational state before deactivating the backup entity. |