XYLAN-DS3-MIB
69 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.11.2 | Nodedsx3Port | |||
| 1.3.6.1.4.1.800.2.11.2.1 | Tabledsx3PortConfigTable | not-accessible | mandatory | A table of DS3/E3 physical layer status and parameter information. |
| 1.3.6.1.4.1.800.2.11.2.1.1 | Rowdsx3PortConfigEntry | not-accessible | mandatory | An entry in the table, containing information about the physical layer of a DS3/E3 interface. |
| 1.3.6.1.4.1.800.2.11.2.1.1.1 | Columndsx3PortConfigSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.11.2.1.1.2 | Columndsx3PortConfigPortIndex | read-only | mandatory | A unique value which identifies this port. |
| 1.3.6.1.4.1.800.2.11.2.1.1.3 | Columndsx3PortConfigIfType | read-only | mandatory | This objects indicates type of interface. |
| 1.3.6.1.4.1.800.2.11.2.1.1.4 | Columndsx3PortConfigTcSubLayer | read-write | mandatory | The type of specific Transmission Convergence sublayer used on this port. Each option is described as follows: none - specific sublayer is not present. plcp - … |
| 1.3.6.1.4.1.800.2.11.2.1.1.5 | Columndsx3PortConfigPlcpStatus | read-only | mandatory | This object indicates current status of PLCP. This object only applies to port which sublayer is configured to PLCP. A value of 1 is returned for other cases. … |
| 1.3.6.1.4.1.800.2.11.2.1.1.6 | Columndsx3PortConfigFEAC | read-only | mandatory | This object indicates the presence FEAC being received by this port. This object only applies to DS3 interface with framing format configured to C-bit parity. … |
| 1.3.6.1.4.1.800.2.11.2.1.1.7 | Columndsx3PortConfigNatUse | read-only | mandatory | The object indicates current state of National Use Bit which is bit 12 of G.751 frame. This object only applies to E3 port which line framimg is configured to … |
| 1.3.6.1.4.1.800.2.11.2.1.1.8 | Columndsx3PortConfigRxPayloadType | read-only | mandatory | The object indicates current state of payload type bits (bit 3,4,5 of Maintenance and Adaptation byte) of an E3 G.832 frame. This objects only applies to E3 po… |
| 1.3.6.1.4.1.800.2.11.2.1.1.9 | Columndsx3PortConfigTimeMarker | read-only | mandatory | The object indicates current state of Timing Marker bit (bit 8 of Maintenanc and Adaptation byte) of an E3 G.832 frame. This objects only applies to E3 port wh… |
| 1.3.6.1.4.1.800.2.11.2.1.1.10 | Columndsx3PortConfigTxPayloadType | read-write | mandatory | The object reflects the value to be inserted in the payload type bits (bit 3,4,5 of Maintenance and Adaptation byte) of an E3 G.832 frame. This objects only ap… |
| 1.3.6.1.4.1.800.2.11.2.1.1.11 | Columndsx3PortConfigExpectedPayloadType | read-write | mandatory | The object indicates the current expected payload type bits (bit 3,4,5 of Maintenance and Adaptation byte) of an E3 G.832 frame. This objects only applies to E… |
| 1.3.6.1.4.1.800.2.11.2.1.1.12 | Columndsx3PortConfigTxTrailTraceID | read-write | mandatory | The object indicates the characters to be inserted as Trail Trace Identifier of an E3 G.832 frame. This object only applies to E3 port whose framing is configu… |
| 1.3.6.1.4.1.800.2.11.2.1.1.13 | Columndsx3PortConfigRxTrailTraceID | read-only | mandatory | The object indicates the current characters received as Trail Trace Identifier of an E3 G.832 frame. This object only applies to E3 port whose framing is confi… |
| 1.3.6.1.4.1.800.2.11.2.1.1.14 | Columndsx3PortConfigExpectedTrailTraceID | read-write | mandatory | The object indicates the expected characters received as Trail Trace Identifier of an E3 G.832 frame. This object only applies to E3 port whose framing is conf… |
| 1.3.6.1.4.1.800.2.11.2.1.1.15 | Columndsx3PortConfigLineStatus | read-only | mandatory | This object indicates the line status of a ds3/e3 interface. Each bit position (bit-0 to bit-18) represents one failure condition of the interface. Bit-19 and … |
| 1.3.6.1.4.1.800.2.11.2.1.1.16 | Columndsx3PortConfigPlScramble | read-write | mandatory | Payload Scrambling Enable. |
| 1.3.6.1.4.1.800.2.11.2.2 | Tabledsx3PortStatsTable | not-accessible | mandatory | A table of DS3/E3 physical port statistics. |
| 1.3.6.1.4.1.800.2.11.2.2.1 | Rowdsx3PortStatsEntry | not-accessible | mandatory | An entry in the table, containing information about the physical port statistics of a DS3/E3 interface. |
| 1.3.6.1.4.1.800.2.11.2.2.1.1 | Columndsx3PortStatsSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.11.2.2.1.2 | Columndsx3PortStatsPortIndex | read-only | mandatory | A unique value which identifies this port. |
| 1.3.6.1.4.1.800.2.11.2.2.1.3 | Columndsx3PortStatsLossOfSignal | read-only | mandatory | Total number of Loss of Signals that have been detected on this port. |
| 1.3.6.1.4.1.800.2.11.2.2.1.4 | Columndsx3PortStatsOutOfFrame | read-only | mandatory | Total number of Out of Frames that have been detected on this port. |
| 1.3.6.1.4.1.800.2.11.2.2.1.5 | Columndsx3PortStatsAISEvent | read-only | mandatory | Total number of AIS events that have been detected on this port. |
| 1.3.6.1.4.1.800.2.11.2.2.1.6 | Columndsx3PortStatsRedAlarmEvent | read-only | mandatory | Total number of Red Alarm events that have been detected on this port. This object only applies to DS3 interface. |
| 1.3.6.1.4.1.800.2.11.2.2.1.7 | Columndsx3PortStatsFarEndReceiveError | read-only | mandatory | Total number of Far-end Receive Error events that have been received on this port. |
| 1.3.6.1.4.1.800.2.11.2.2.1.8 | Columndsx3PortStatsFarEndBlkError | read-only | mandatory | Total number of Far-end Block Error events that have been received on this port. |
| 1.3.6.1.4.1.800.2.11.2.2.1.9 | Columndsx3PortStatsLineCodeVioEvent | read-only | mandatory | Total number of Line Code Violation events that have been received on this port. This is a count of both Bipolar Violation (BPV) and Excessive zeros (EXZs). |
| 1.3.6.1.4.1.800.2.11.2.2.1.10 | Columndsx3PortStatsFramingBitError | read-only | mandatory | Total number of Framing Bit Error events that have been detected on this port. |
| 1.3.6.1.4.1.800.2.11.2.2.1.11 | Columndsx3PortStatsChangeOfFrameAlign | read-only | mandatory | Total number of Change of Frame Alignment events that have been detected on this port. |
| 1.3.6.1.4.1.800.2.11.2.2.1.12 | Columndsx3PortStatsParityBitError | read-only | mandatory | Total number of parity bit errors that have been detected on this port. |
| 1.3.6.1.4.1.800.2.11.2.2.1.13 | Columndsx3PortStatsPathParityBitError | read-only | mandatory | Total number of path parity bit errors that have been detected on this port. |
| 1.3.6.1.4.1.800.2.11.2.2.1.14 | Columndsx3PortStatsPlcpLossOfFrame | read-only | mandatory | Total number of PLCP loss of frame events that have been detected on this port. A value of zero is returned if port sublayer is not PLCP. |
| 1.3.6.1.4.1.800.2.11.2.2.1.15 | Columndsx3PortStatsPlcpOutOfFrame | read-only | mandatory | Total number of PLCP out of frame events that have been detected on this port. A value of zero is returned if port sublayer is not PLCP. |
| 1.3.6.1.4.1.800.2.11.2.2.1.16 | Columndsx3PortStatsPlcpYellowAlarm | read-only | mandatory | Total number of PLCP Yellow Alarms that have been detected on this port. A value of zero is returned if port sublayer is not PLCP. |
| 1.3.6.1.4.1.800.2.11.2.2.1.17 | Columndsx3PortStatsPlcpFarEndBlkError | read-only | mandatory | Total number of PLCP Far-end Block Errors that have been detected on this port. A value of zero is returned if port sublayer is not PLCP. |
| 1.3.6.1.4.1.800.2.11.2.2.1.18 | Columndsx3PortStatsPlcpFramingError | read-only | mandatory | Total number of PLCP Framing Octet Errors that have been detected on this port. A value of zero is returned if port sublayer is not PLCP. |
| 1.3.6.1.4.1.800.2.11.2.2.1.19 | Columndsx3PortStatsPlcpBIPError | read-only | mandatory | Total number of PLCP Bit Interleaved Parity Errors that have been detected on this port. A value of zero is returned if port sublayer is not PLCP. |
| 1.3.6.1.4.1.800.2.11.2.2.1.20 | Columndsx3PortStatsPayloadTypeMismatchError | read-only | mandatory | Total number of payload type mismatch failure that have been detected on this port. This object is applicable to E3 G.832 only. A value of zero is returned if … |
| 1.3.6.1.4.1.800.2.11.2.2.1.21 | Columndsx3PortStatsUnequippedError | read-only | mandatory | Total number of unequipped failure that have been detected on this port. This object is applicable to E3 G.832 only. A value of zero is returned if the port is… |
| 1.3.6.1.4.1.800.2.11.2.2.1.22 | Columndsx3PortStatsTrailTraceIDMismatchError | read-only | mandatory | Total number of trail trace identification mismatch failure that have been detected on this port. This object is applicable to E3 G.832 only. A value of zero i… |
| 1.3.6.1.4.1.800.2.11.2.3 | Tabledsx3PortIntervalTable | not-accessible | mandatory | A table of DS3/E3 physical port statistics. |
| 1.3.6.1.4.1.800.2.11.2.3.1 | Rowdsx3PortIntervalEntry | not-accessible | mandatory | An entry in the table, containing information about the physical port statistics of a DS3/E3 interface. |
| 1.3.6.1.4.1.800.2.11.2.3.1.1 | Columndsx3PortIntervalSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.11.2.3.1.2 | Columndsx3PortIntervalPortIndex | read-only | mandatory | A unique value which identifies this port. |
| 1.3.6.1.4.1.800.2.11.2.3.1.3 | Columndsx3PortIntervalClear | read-write | mandatory | This object allows clearing all interval statistics of this port to value of zero. Setting this object to clearRequest will initiate managed entity to clear th… |
| 1.3.6.1.4.1.800.2.11.2.3.1.4 | Columndsx3PortIntervalLastClear | read-only | mandatory | The value of MIB II's sysUpTime object at the time this table statistics is cleared. |
| 1.3.6.1.4.1.800.2.11.2.3.1.5 | Columndsx3PortIntervalLossOfSignal | read-only | mandatory | Total number of Loss of Signals that have been detected on this port since it's cleared by the managing station. |
| 1.3.6.1.4.1.800.2.11.2.3.1.6 | Columndsx3PortIntervalOutOfFrame | read-only | mandatory | Total number of Out of Frames that have been detected on this port since it's cleared by the managing station. |
| 1.3.6.1.4.1.800.2.11.2.3.1.7 | Columndsx3PortIntervalAISEvent | read-only | mandatory | Total number of AIS events that have been detected on this port since it's cleared by the managing station. |
| 1.3.6.1.4.1.800.2.11.2.3.1.8 | Columndsx3PortIntervalRedAlarmEvent | read-only | mandatory | Total number of Red Alarm events that have been detected on this port since it's cleared by the managing station. This object only applies to DS3 interface. |
| 1.3.6.1.4.1.800.2.11.2.3.1.9 | Columndsx3PortIntervalFarEndReceiveError | read-only | mandatory | Total number of far-end receive error events that have been received on this port since it's cleared by the managing station. |
| 1.3.6.1.4.1.800.2.11.2.3.1.10 | Columndsx3PortIntervalFarEndBlkError | read-only | mandatory | Total number of far-end block error events that have been received on this port since it's cleared by the managing station. |
| 1.3.6.1.4.1.800.2.11.2.3.1.11 | Columndsx3PortIntervalLineCodeVioEvent | read-only | mandatory | Total number of line code violation events that have been received on this port. This is a count of both Bipolar Violation (BPV) and Excessive zeros (EXZs) sin… |
| 1.3.6.1.4.1.800.2.11.2.3.1.12 | Columndsx3PortIntervalFramingBitError | read-only | mandatory | Total number of Framing Bit Error events that have been detected on this port since it's cleared by the managing station. |
| 1.3.6.1.4.1.800.2.11.2.3.1.13 | Columndsx3PortIntervalChangeOfFrameAlign | read-only | mandatory | Total number of change of frame alignment events that have been detected on this port since it's cleared by the managing station. |
| 1.3.6.1.4.1.800.2.11.2.3.1.14 | Columndsx3PortIntervalParityBitError | read-only | mandatory | Total number of parity bit errors that have been detected on this port since it's cleared by the managing station. |
| 1.3.6.1.4.1.800.2.11.2.3.1.15 | Columndsx3PortIntervalPathParityBitError | read-only | mandatory | Total number of path parity bit errors that have been detected on this port since it's cleared by the managing station. |
| 1.3.6.1.4.1.800.2.11.2.3.1.16 | Columndsx3PortIntervalPlcpLossOfFrame | read-only | mandatory | Total number of PLCP loss of frame events that have been detected on this port since it's cleared by the managing station. A value of zero is returned if port … |
| 1.3.6.1.4.1.800.2.11.2.3.1.17 | Columndsx3PortIntervalPlcpOutOfFrame | read-only | mandatory | Total number of PLCP out of frame events that have been detected on this port since it's cleared by the managing station. A value of zero is returned if port s… |
| 1.3.6.1.4.1.800.2.11.2.3.1.18 | Columndsx3PortIntervalPlcpYellowAlarm | read-only | mandatory | Total number of PLCP Yellow Alarms that have been detected detected on this port since it's cleared by the managing station. A value of zero is returned if por… |
| 1.3.6.1.4.1.800.2.11.2.3.1.19 | Columndsx3PortIntervalPlcpFarEndBlkError | read-only | mandatory | Total number of PLCP Far-end Block Errors that have been detected on this port since it's cleared by the managing station. A value of zero is returned if port … |
| 1.3.6.1.4.1.800.2.11.2.3.1.20 | Columndsx3PortIntervalPlcpFramingError | read-only | mandatory | Total number of PLCP Framing Octet Errors that have been detected on this port since it's cleared by the managing station. A value of zero is returned if port … |
| 1.3.6.1.4.1.800.2.11.2.3.1.21 | Columndsx3PortIntervalPlcpBIPError | read-only | mandatory | Total number of PLCP Bit Interleaved Parity Errors that have detected on this port since it's cleared by the managing station. A value of zero is returned if p… |
| 1.3.6.1.4.1.800.2.11.2.3.1.22 | Columndsx3PortIntervalPayloadTypeMismatchError | read-only | mandatory | Total number of payload type mismatch failure that have been detected on this port since it's cleared by the managing station. This object is applicable to E3 … |
| 1.3.6.1.4.1.800.2.11.2.3.1.23 | Columndsx3PortIntervalUnequippedError | read-only | mandatory | Total number of unequipped failure that have been detected on this port sinece it's cleared by the managing station. This object is applicable to E3 G.832 only… |
| 1.3.6.1.4.1.800.2.11.2.3.1.24 | Columndsx3PortIntervalTrailTraceIDMismatchError | read-only | mandatory | Total number of trail trace identification mismatch failure that have been detected on this port since it's cleared by the managing station. This object is app… |