XYLAN-FRAME-RELAY-MIB
75 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.8.1 | NodefrxPortGroup | |||
| 1.3.6.1.4.1.800.2.8.1.1 | TablefrxPortTable | not-accessible | mandatory | A table of port layer status and parameter information for the UNI's physical interface. |
| 1.3.6.1.4.1.800.2.8.1.1.1 | RowfrxPortEntry | not-accessible | mandatory | An entry in the table, containing information about the physical layer of a UNI interface. |
| 1.3.6.1.4.1.800.2.8.1.1.1.1 | ColumnfrxPortSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.8.1.1.1.2 | ColumnfrxPortPortIndex | read-only | mandatory | A unique value which identifies this WSM submodule port. |
| 1.3.6.1.4.1.800.2.8.1.1.1.3 | ColumnfrxPortDescription | read-write | mandatory | A description for this Frame Relay port. |
| 1.3.6.1.4.1.800.2.8.1.1.1.4 | ColumnfrxPortDefaultBridgingVLAN | read-write | mandatory | The default VLAN for new PVCs that have not been configured for the Bridging Service. A value of zero(0) indicates that unconfigured VCs will not perform a bri… |
| 1.3.6.1.4.1.800.2.8.1.1.1.5 | ColumnfrxPortDefaultBridgingServiceNumber | read-write | mandatory | If non-zero, this is the unique service number which unconfigured Bridging Virtual Circuits are added to if frxPortDefaultBridgingVLAN is non zero (set to a VL… |
| 1.3.6.1.4.1.800.2.8.1.1.1.6 | ColumnfrxPortDefaultRoutingVLAN | read-write | mandatory | The default VLAN for new PVCs that have not been configured for a routing Service. A value of zero(0) indicates that unconfigured VCs will not perform a routin… |
| 1.3.6.1.4.1.800.2.8.1.1.1.7 | ColumnfrxPortDefaultCompressionAdminStatus | read-write | mandatory | This object controls whether or not an unconfigured virtual circuit will attempt (enable) or not attempt (disable) to negotiate for compression. |
| 1.3.6.1.4.1.800.2.8.1.1.1.8 | ColumnfrxPortDefaultCompressionPRetryTime | read-write | mandatory | The default P-Retry-Time for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9. This object cont… |
| 1.3.6.1.4.1.800.2.8.1.1.1.9 | ColumnfrxPortDefaultCompressionPRetryCount | read-write | mandatory | The default P-Retry-Count for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9 This object cont… |
| 1.3.6.1.4.1.800.2.8.1.1.1.10 | ColumnfrxPortDefaultBridgingMode | read-write | mandatory | The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY |
| 1.3.6.1.4.1.800.2.8.2 | NodefrxVcControlGroup | |||
| 1.3.6.1.4.1.800.2.8.2.1 | TablefrxVcControlTable | not-accessible | mandatory | A table of Frame Relay virtual circuit configuration and control information. |
| 1.3.6.1.4.1.800.2.8.2.1.1 | RowfrxVcControlEntry | not-accessible | mandatory | An entry in the table, containing information about the Frame Relay virtual circuit statistics. |
| 1.3.6.1.4.1.800.2.8.2.1.1.1 | ColumnfrxVcControlSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.8.2.1.1.2 | ColumnfrxVcControlPortIndex | read-only | mandatory | A unique value which identifies this WSM submodule port. |
| 1.3.6.1.4.1.800.2.8.2.1.1.3 | ColumnfrxVcControlDlci | read-only | mandatory | A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit. |
| 1.3.6.1.4.1.800.2.8.2.1.1.4 | ColumnfrxVcControlCompressionAdminStatus | read-write | mandatory | This object controls whether or not the virtual circuit will attempt (enable) or not attemp (disable) to negotiate for compression. The current state of compre… |
| 1.3.6.1.4.1.800.2.8.2.1.1.5 | ColumnfrxVcControlCompressionOperPhase | read-only | mandatory | This object reports the current phase (state) of compression for this virtual circuit if the Compression Admin Status is set to enable. If the compression Admi… |
| 1.3.6.1.4.1.800.2.8.2.1.1.6 | ColumnfrxVcControlCompressionPRetryTime | read-write | mandatory | The default P-Retry-Time for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9. This object repr… |
| 1.3.6.1.4.1.800.2.8.2.1.1.7 | ColumnfrxVcControlCompressionPRetryCount | read-write | mandatory | The default P-Retry-Count for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9 This object repr… |
| 1.3.6.1.4.1.800.2.8.2.1.1.8 | ColumnfrxVcControlBridgingInUse | read-write | mandatory | Determine for NMS Manager to see whether VC is already in-use. 1=InUse, 0=Free. |
| 1.3.6.1.4.1.800.2.8.3 | NodefrxServiceGroup | |||
| 1.3.6.1.4.1.800.2.8.3.1 | TablefrxServiceTable | not-accessible | mandatory | A table of Frame Relay services status and parameter information. |
| 1.3.6.1.4.1.800.2.8.3.1.1 | RowfrxServiceEntry | not-accessible | mandatory | An entry in the table, containing information about the Frame Relay services. |
| 1.3.6.1.4.1.800.2.8.3.1.1.1 | ColumnfrxServiceSlotIndex | read-write | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.8.3.1.1.2 | ColumnfrxServicePortIndex | read-write | mandatory | A unique value which identifies this WSM submodule port. |
| 1.3.6.1.4.1.800.2.8.3.1.1.3 | ColumnfrxServiceNumber | read-only | mandatory | The unique service number for this particular slot/port. |
| 1.3.6.1.4.1.800.2.8.3.1.1.4 | ColumnfrxServiceTableEntryType | read-write | mandatory | The type of table entry for this Frame Relay Serivce. A static entry is one that is stored in non-volatile memory. A dynamic entry is one that is automatically… |
| 1.3.6.1.4.1.800.2.8.3.1.1.5 | ColumnfrxServiceDescription | read-write | mandatory | A description for this Frame Relay service. |
| 1.3.6.1.4.1.800.2.8.3.1.1.6 | ColumnfrxServiceType | read-write | mandatory | The service type. |
| 1.3.6.1.4.1.800.2.8.3.1.1.7 | ColumnfrxServiceOperStatus | read-only | mandatory | The service operational status. |
| 1.3.6.1.4.1.800.2.8.3.1.1.8 | ColumnfrxServiceAdminStatus | read-write | mandatory | The service adminstration status. |
| 1.3.6.1.4.1.800.2.8.3.1.1.9 | ColumnfrxServiceVirtualCircuits | read-write | mandatory | The virtual circuits for this service. Interpret this as a 16 bit field per connection: Trunking 1, Bridging 1..255, IP 1..255. |
| 1.3.6.1.4.1.800.2.8.3.1.1.10 | ColumnfrxServiceVlans | read-write | mandatory | The Vlans for this service. Interpret this as a 16 bit field per vlan: Trunking 1-32, Bridging 1, IP 1 |
| 1.3.6.1.4.1.800.2.8.3.1.1.11 | ColumnfrxServiceBridgingMode | read-write | mandatory | The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY |
| 1.3.6.1.4.1.800.2.8.4 | NodefrxVcStatsGroup | |||
| 1.3.6.1.4.1.800.2.8.4.1 | TablefrxVcStatsTable | not-accessible | mandatory | A table of Frame Relay virtual circuit statistics information. |
| 1.3.6.1.4.1.800.2.8.4.1.1 | RowfrxVcStatsEntry | not-accessible | mandatory | An entry in the table, containing information about the Frame Relay virtual circuit statistics. |
| 1.3.6.1.4.1.800.2.8.4.1.1.1 | ColumnfrxVcStatsSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.8.4.1.1.2 | ColumnfrxVcStatsPortIndex | read-only | mandatory | A unique value which identifies this WSM submodule port. |
| 1.3.6.1.4.1.800.2.8.4.1.1.3 | ColumnfrxVcStatsDlci | read-only | mandatory | A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.4 | ColumnfrxVcStatsTxIPOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.5 | ColumnfrxVcStatsTxIPFrames | read-only | mandatory | The total number of transmitted routed IP format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.6 | ColumnfrxVcStatsRxIPOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.7 | ColumnfrxVcStatsRxIPFrames | read-only | mandatory | The total number of received routed IP format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.8 | ColumnfrxVcStatsTxIPXOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.9 | ColumnfrxVcStatsTxIPXFrames | read-only | mandatory | The total number of transmitted routed IPX format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.10 | ColumnfrxVcStatsRxIPXOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.11 | ColumnfrxVcStatsRxIPXFrames | read-only | mandatory | The total number of received routed IPX format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.12 | ColumnfrxVcStatsTxBPDUOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.13 | ColumnfrxVcStatsTxBPDUFrames | read-only | mandatory | The total number of transmitted BPDU frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.14 | ColumnfrxVcStatsRxBPDUOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.15 | ColumnfrxVcStatsRxBPDUFrames | read-only | mandatory | The total number of received BPDU frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.16 | ColumnfrxVcStatsTxEthernetOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.17 | ColumnfrxVcStatsTxEthernetFrames | read-only | mandatory | The total number of transmitted bridged 802.3 format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.18 | ColumnfrxVcStatsRxEthernetOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.19 | ColumnfrxVcStatsRxEthernetFrames | read-only | mandatory | The total number of received bridged 802.3 format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.20 | ColumnfrxVcStatsTx8025Octets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.21 | ColumnfrxVcStatsTx8025Frames | read-only | mandatory | The total number of transmitted 8025 frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.22 | ColumnfrxVcStatsRx8025Octets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.23 | ColumnfrxVcStatsRx8025Frames | read-only | mandatory | The total number of received 8025 frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.24 | ColumnfrxVcStatsTxFDDIOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.25 | ColumnfrxVcStatsTxFDDIFrames | read-only | mandatory | The total number of transmitted FDDI frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.26 | ColumnfrxVcStatsRxFDDIOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.27 | ColumnfrxVcStatsRxFDDIFrames | read-only | mandatory | The total number of received FDDI frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.28 | ColumnfrxVcStatsTxCompressedOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within compressed format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.29 | ColumnfrxVcStatsTxCompressedFrames | read-only | mandatory | The total number of transmitted compressed format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.30 | ColumnfrxVcStatsRxCompressedOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within compressed format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.31 | ColumnfrxVcStatsRxCompressedFrames | read-only | mandatory | The total number of received compressed format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.8.4.1.1.32 | ColumnfrxVcStatsTxPrecompressedOctets | read-only | mandatory | The total number of octets (including the Frame Relay Header field) prior to compression of data for transmission within compressed format frames on this virtu… |
| 1.3.6.1.4.1.800.2.8.4.1.1.33 | ColumnfrxVcStatsRxDecompressedOctets | read-only | mandatory | The total number of octets (including the Frame Relay Header field) after decompression of data received within compressed format frames on this virtual circui… |
| 1.3.6.1.4.1.800.2.8.4.1.1.34 | ColumnfrxVcStatsRxCompressedDiscards | read-only | mandatory | The total number of received compressed format frames on this virtual circuit that were discarded due to error or lost frames (e.g. out of sequence, decompress… |