XYLAN-IPX-MIB
62 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| XYLAN-BASE-MIB | xylanIpxArch |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.6.1 | NodexylanIpxRoutingGroup | |||
| 1.3.6.1.4.1.800.2.6.1.1 | TablexylanIpxStaticRouteTable | not-accessible | mandatory | The Static Routes table contains information about all destinations reached via statically configured routes. |
| 1.3.6.1.4.1.800.2.6.1.1.1 | RowxylanIpxStaticRouteEntry | not-accessible | mandatory | Each entry corresponds to one static route. |
| 1.3.6.1.4.1.800.2.6.1.1.1.1 | ColumnxylanIpxStaticRouteNetNum | read-write | mandatory | The IPX network number of the route's destination. |
| 1.3.6.1.4.1.800.2.6.1.1.1.2 | ColumnxylanIpxStaticRouteAdminState | read-write | mandatory | The current status of this route. active (1) means the route is functioning, delete (2) tell SNMP to delete the route |
| 1.3.6.1.4.1.800.2.6.1.1.1.3 | ColumnxylanIpxStaticRouteNextHopNet | read-write | mandatory | The IPX network number of the router used to reach the first hop in the static route. |
| 1.3.6.1.4.1.800.2.6.1.1.1.4 | ColumnxylanIpxStaticRouteNextHopNode | read-write | mandatory | The IPX node number of the router used to reach the first hop in the static route. |
| 1.3.6.1.4.1.800.2.6.1.1.1.5 | ColumnxylanIpxStaticRouteTicks | read-only | mandatory | The delay, in ticks, to reach the route's destination. |
| 1.3.6.1.4.1.800.2.6.1.1.1.6 | ColumnxylanIpxStaticRouteHopCount | read-only | mandatory | The number of hops necessary to reach the destination. |
| 1.3.6.1.4.1.800.2.6.2 | NodexylanIpxFilterGroup | |||
| 1.3.6.1.4.1.800.2.6.2.1 | TablexylanIpxRipSapFilterTable | not-accessible | mandatory | The IPX Rip/Sap Filter Table contains information about all filters that have been defined. |
| 1.3.6.1.4.1.800.2.6.2.1.1 | RowxylanIpxRipSapFilterEntry | not-accessible | mandatory | Each entry corresponds to one filter. |
| 1.3.6.1.4.1.800.2.6.2.1.1.1 | ColumnxylanIpxRipSapFilterNum | read-only | mandatory | The number identifying this instance. This number can be used when specifying a filter to delete. |
| 1.3.6.1.4.1.800.2.6.2.1.1.2 | ColumnxylanIpxRipSapFilterAdminState | read-write | mandatory | The current status of this filter, active (1) means the filter is functioning, delete (2) tells SNMP to delete the filter |
| 1.3.6.1.4.1.800.2.6.2.1.1.3 | ColumnxylanIpxRipSapFilterType | read-write | mandatory | The type of filter. |
| 1.3.6.1.4.1.800.2.6.2.1.1.4 | ColumnxylanIpxRipSapFilterNet | read-write | mandatory | The IPX Network Address to filter. A network address of all 0's is used to denote All Networks. |
| 1.3.6.1.4.1.800.2.6.2.1.1.5 | ColumnxylanIpxRipSapFilterNetMask | read-write | mandatory | The IPX Network Mask to be used. |
| 1.3.6.1.4.1.800.2.6.2.1.1.6 | ColumnxylanIpxRipSapFilterNode | read-write | mandatory | The IPX node address to filter. A node address of all 0's is used to denote All Nodes. |
| 1.3.6.1.4.1.800.2.6.2.1.1.7 | ColumnxylanIpxRipSapFilterNodeMask | read-write | mandatory | The IPX node address mask to be used. |
| 1.3.6.1.4.1.800.2.6.2.1.1.8 | ColumnxylanIpxRipSapFilterSvcType | read-write | mandatory | The SAP service type on which to filter. The SAP service types are defined by Novell. A value of ALL (65535) indicates that all services will be filtered. |
| 1.3.6.1.4.1.800.2.6.2.1.1.9 | ColumnxylanIpxRipSapFilterMode | read-write | mandatory | The action defined by this filter. block (1) means packets matching this filter will be blocked, and allow (0) means that packets matching this filter will be … |
| 1.3.6.1.4.1.800.2.6.2.1.1.10 | ColumnxylanIpxRipSapFilterGroupId | read-write | mandatory | The GroupId can be used to apply this filter to a particular interface. A GroupId of 0 means that the filter is global. |
| 1.3.6.1.4.1.800.2.6.2.1.1.11 | ColumnxylanIpxRipSapFilterVlanId | read-write | mandatory | The VlanId for this filter. |
| 1.3.6.1.4.1.800.2.6.2.1.1.12 | ColumnxylanIpxRipSapFilterWanType | read-write | mandatory | If the Vlan has Wan Routing enabled, this object can be used to specify whether this interface is a Frame Relay service or a PPP service. This will be used to … |
| 1.3.6.1.4.1.800.2.6.2.1.1.13 | ColumnxylanIpxRipSapFilterSlot | read-write | mandatory | If the WanType specifies a Frame Relay service, the slot/port/vc can be used to apply this filter to a particular Virtual Circuit (VC). |
| 1.3.6.1.4.1.800.2.6.2.1.1.14 | ColumnxylanIpxRipSapFilterPort | read-write | mandatory | If the WanType specifies a Frame Relay service, the slot/port/vc can be used to apply this filter to a particular Virtual Circuit (VC). |
| 1.3.6.1.4.1.800.2.6.2.1.1.15 | ColumnxylanIpxRipSapFilterVc | read-write | mandatory | If the WanType specifies a Frame Relay service, the slot/port/vc can be used to apply this filter to a particular Virtual Circuit (VC). |
| 1.3.6.1.4.1.800.2.6.2.1.1.16 | ColumnxylanIpxRipSapFilterPeerId | read-write | mandatory | If the WanType specifies a PPP service, the PeerId can be used to apply this filter to a particular Peer. |
| 1.3.6.1.4.1.800.2.6.3 | NodexylanIpxWatchdogSpoofGroup | |||
| 1.3.6.1.4.1.800.2.6.3.1 | TablexylanIpxWatchdogSpoofTable | not-accessible | mandatory | The IPX Watchdog Spoofing Table contains information about all of the WAN routing services and their current IPX spoofing status. |
| 1.3.6.1.4.1.800.2.6.3.1.1 | RowxylanIpxWatchdogSpoofEntry | not-accessible | mandatory | Each entry corresponds to one WAN routing service. |
| 1.3.6.1.4.1.800.2.6.3.1.1.1 | ColumnxylanIpxWatchdogSpoofGroupId | read-write | mandatory | The GroupId of the WAN routing service that this entry applies to. |
| 1.3.6.1.4.1.800.2.6.3.1.1.2 | ColumnxylanIpxWatchdogSpoofMode | read-write | mandatory | This controls whether the IPX Watchdog Spoofing is enabled or disabled. When enabled, this routing service will spoof IPX Watchdog packets. When disabled, this… |
| 1.3.6.1.4.1.800.2.6.4 | NodexylanIpxSerialFilterGroup | |||
| 1.3.6.1.4.1.800.2.6.4.1 | TablexylanIpxSerialFilterTable | not-accessible | mandatory | The IPX Serialization Filtering Table contains information about all of the WAN routing services and their current IPX Serialization Filtering status. |
| 1.3.6.1.4.1.800.2.6.4.1.1 | RowxylanIpxSerialFilterEntry | not-accessible | mandatory | Each entry corresponds to one WAN routing service. |
| 1.3.6.1.4.1.800.2.6.4.1.1.1 | ColumnxylanIpxSerialFilterGroupId | read-write | mandatory | The GroupId of the WAN routing service that this entry applies to. |
| 1.3.6.1.4.1.800.2.6.4.1.1.2 | ColumnxylanIpxSerialFilterMode | read-write | mandatory | This controls whether the IPX Serialization Filtering is enabled or disabled. When enabled, this routing service will filter IPX Serialization packets. When di… |
| 1.3.6.1.4.1.800.2.6.5 | NodexylanSpxKeepaliveSpoofGroup | |||
| 1.3.6.1.4.1.800.2.6.5.1 | TablexylanSpxKeepaliveSpoofTable | not-accessible | mandatory | The SPX Keepalive Spoofing Table contains information about all of the WAN routing services and their current SPX Keepalive spoofing status. |
| 1.3.6.1.4.1.800.2.6.5.1.1 | RowxylanSpxKeepaliveSpoofEntry | not-accessible | mandatory | Each entry corresponds to one WAN routing service. |
| 1.3.6.1.4.1.800.2.6.5.1.1.1 | ColumnxylanSpxKeepaliveSpoofGroupId | read-write | mandatory | The GroupId of the WAN routing service that this entry applies to. |
| 1.3.6.1.4.1.800.2.6.5.1.1.2 | ColumnxylanSpxKeepaliveSpoofMode | read-write | mandatory | This controls whether the SPX Keepalive Spoofing is enabled or disabled. When enabled, this routing service will spoof SPX Keepalive packets. When disabled, th… |
| 1.3.6.1.4.1.800.2.6.6 | NodexylanIpxType20Group | |||
| 1.3.6.1.4.1.800.2.6.6.1 | TablexylanIpxType20Table | not-accessible | mandatory | The IPX Type 20 packets allow NetBios to use IPX. This can enable the passing of packet on each interface. |
| 1.3.6.1.4.1.800.2.6.6.1.1 | RowxylanIpxType20Entry | not-accessible | mandatory | Each entry corresponds to one Virtual LAN. |
| 1.3.6.1.4.1.800.2.6.6.1.1.1 | ColumnxylanIpxType20VlanId | read-write | mandatory | The VLAN Id of the routing interface that this entry applies to. |
| 1.3.6.1.4.1.800.2.6.6.1.1.2 | ColumnxylanIpxType20Mode | read-write | mandatory | This controls whether IPX Type 20 packet are enabled or disabled. When enabled, this routing interface will forward Type 20 packets. When disabled, the packets… |
| 1.3.6.1.4.1.800.2.6.7 | NodexylanIpxTimerGroup | |||
| 1.3.6.1.4.1.800.2.6.7.1 | TablexylanIpxTimerTable | not-accessible | mandatory | The IPX Timer allows adjustable variation of the RIP and SAP timers. |
| 1.3.6.1.4.1.800.2.6.7.1.1 | RowxylanIpxTimerEntry | not-accessible | mandatory | Each entry corresponds to one Virtual LAN. |
| 1.3.6.1.4.1.800.2.6.7.1.1.1 | ColumnxylanIpxTimerVlanId | read-write | mandatory | The VLAN Id of the routing interface that this entry applies to. |
| 1.3.6.1.4.1.800.2.6.7.1.1.2 | ColumnxylanIpxTimerSap | read-write | mandatory | This controls whether IPX SAP packet timer duration. |
| 1.3.6.1.4.1.800.2.6.7.1.1.3 | ColumnxylanIpxTimerRip | read-write | mandatory | This controls whether IPX RIP packet timer duration. |
| 1.3.6.1.4.1.800.2.6.8 | NodexylanIpxDefRouteGroup | |||
| 1.3.6.1.4.1.800.2.6.8.1 | TablexylanIpxDefRouteTable | not-accessible | mandatory | The default route table contains information about the destinations to which all packets are sent when the destination network is not known. |
| 1.3.6.1.4.1.800.2.6.8.1.1 | RowxylanIpxDefRouteEntry | not-accessible | mandatory | One table entry per switch for default route. |
| 1.3.6.1.4.1.800.2.6.8.1.1.1 | ColumnxylanIpxDefRouteNum | read-write | mandatory | The table row ID will always be 1. |
| 1.3.6.1.4.1.800.2.6.8.1.1.2 | ColumnxylanIpxDefRouteNet | read-write | mandatory | The IPX network number of the router used to reach the first hop in the default route. |
| 1.3.6.1.4.1.800.2.6.8.1.1.3 | ColumnxylanIpxDefRouteNode | read-write | mandatory | The IPX node number of the router used to reach the first hop in the default route. |
| 1.3.6.1.4.1.800.2.6.9 | NodexylanIpxExtGroup | |||
| 1.3.6.1.4.1.800.2.6.9.1 | ScalarxylanIpxExtMsg | read-write | mandatory | A boolean variable that indicated whether extended RIP/SAP packets are sent and received. |