XYLAN-M013-MIB
199 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.25.1 | Nodem013ProvisioningGroup | |||
| 1.3.6.1.4.1.800.2.25.1.1 | Tablem013ProvisioningTable | not-accessible | mandatory | A table of provisioning configuration data used to configure an HDLC interface on a DS3 connection. |
| 1.3.6.1.4.1.800.2.25.1.1.1 | Rowm013ProvisioningEntry | not-accessible | mandatory | An entry in the table, containing information about provisioning an HDLC channel on a DS3 connection. |
| 1.3.6.1.4.1.800.2.25.1.1.1.1 | Columnm013SlotIndex | read-only | mandatory | Slot for channel being provisioned. |
| 1.3.6.1.4.1.800.2.25.1.1.1.2 | Columnm013LogicalPortIndex | read-only | mandatory | A per-slot unique HDLC channel number. |
| 1.3.6.1.4.1.800.2.25.1.1.1.3 | Columnm013Description | read-write | mandatory | A user description of this channel. |
| 1.3.6.1.4.1.800.2.25.1.1.1.4 | Columnm013Ds3PortIndex | read-write | mandatory | Physical DS3 port for channel being provisioned. |
| 1.3.6.1.4.1.800.2.25.1.1.1.5 | Columnm013Ds1Fraction | read-write | mandatory | The DS1 channel within the DS3 circuit that is used to create this HDLC channel. An entry of 0 indicates this is a clear channel (full DS3 bandwidth) connectio… |
| 1.3.6.1.4.1.800.2.25.1.1.1.6 | Columnm013Ds0Mask | read-write | mandatory | This is a bit mask of the DS0 channels within the selected DS1 fraction that make up the desired HDLC channel. If m013Ds1Fraction is 0 this value has no meaning |
| 1.3.6.1.4.1.800.2.25.1.1.1.7 | Columnm013IfIndex | read-only | mandatory | A per-switch unique number for this HDLC channel. This number is a combination of Slot and Logical Port numbers. |
| 1.3.6.1.4.1.800.2.25.1.1.1.8 | Columnm013Protocol | read-write | mandatory | The L2 protocol that is used on this HDLC channel. |
| 1.3.6.1.4.1.800.2.25.1.1.1.9 | Columnm013EntryStatus | read-write | mandatory | Value used for the control of the creation of this interface. |
| 1.3.6.1.4.1.800.2.25.2 | Nodem013ServiceGroup | |||
| 1.3.6.1.4.1.800.2.25.2.1 | Tablem013ServiceTable | not-accessible | mandatory | A table of M013 services status and parameter information. |
| 1.3.6.1.4.1.800.2.25.2.1.1 | Rowm013ServiceEntry | not-accessible | mandatory | An entry in the table, containing information about the M013 services. |
| 1.3.6.1.4.1.800.2.25.2.1.1.1 | Columnm013ServiceSlotIndex | read-write | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.25.2.1.1.2 | Columnm013ServiceLogicalPortIndex | read-write | mandatory | A per-slot unique value which identifies this HDLC logical port. |
| 1.3.6.1.4.1.800.2.25.2.1.1.3 | Columnm013ServiceNumber | read-only | mandatory | The unique service number for this particular slot/logical port. |
| 1.3.6.1.4.1.800.2.25.2.1.1.4 | Columnm013ServiceTableEntryType | read-write | mandatory | The type of table entry for this M013 Serivce. A static entry is one that is stored in non-volatile memory. A dynamic entry is one that is automatically create… |
| 1.3.6.1.4.1.800.2.25.2.1.1.5 | Columnm013ServiceDescription | read-write | mandatory | A description for this M013 service. |
| 1.3.6.1.4.1.800.2.25.2.1.1.6 | Columnm013ServiceType | read-write | mandatory | The service type. |
| 1.3.6.1.4.1.800.2.25.2.1.1.7 | Columnm013ServiceOperStatus | read-only | mandatory | The service operational status. |
| 1.3.6.1.4.1.800.2.25.2.1.1.8 | Columnm013ServiceAdminStatus | read-write | mandatory | The service adminstration status. |
| 1.3.6.1.4.1.800.2.25.2.1.1.9 | Columnm013ServiceVirtualCircuit | read-write | mandatory | The virtual circuit for this service. In case of PPP it should be set to zero, in case of Frame Relay - to the appropriate DLCI value. |
| 1.3.6.1.4.1.800.2.25.2.1.1.10 | Columnm013ServiceVlans | read-write | mandatory | The Vlans for this service. Interpret this as a 16 bit field per vlan: Trunking 1-32, Bridging 1, IP 1 |
| 1.3.6.1.4.1.800.2.25.2.1.1.11 | Columnm013ServiceBridgingMode | read-write | mandatory | The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY |
| 1.3.6.1.4.1.800.2.25.3 | Nodem013FrxPortGroup | |||
| 1.3.6.1.4.1.800.2.25.3.1 | Tablem013FrxPortTable | not-accessible | mandatory | A table of port layer status and parameter information for the UNI's logical interface. |
| 1.3.6.1.4.1.800.2.25.3.1.1 | Rowm013FrxPortEntry | not-accessible | mandatory | An entry in the table, containing information about the logical layer of a UNI interface. |
| 1.3.6.1.4.1.800.2.25.3.1.1.1 | Columnm013FrxPortSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.25.3.1.1.2 | Columnm013FrxPortPortIndex | read-only | mandatory | A per-slot unique value which identifies this HDLC logical port. |
| 1.3.6.1.4.1.800.2.25.3.1.1.3 | Columnm013FrxPortDescription | read-write | mandatory | A description for this Frame Relay port. |
| 1.3.6.1.4.1.800.2.25.3.1.1.4 | Columnm013FrxPortAdminStatus | read-write | mandatory | If set to enabled, enables Frame Relay Interface. If set to disabled, disables Frame Relay Interface |
| 1.3.6.1.4.1.800.2.25.3.1.1.5 | Columnm013FrxPortDefaultIpRoutingAdminStatus | read-write | mandatory | If set to enabled, enables Default IP Routing. If set to disabled, disables Default IP Routing |
| 1.3.6.1.4.1.800.2.25.3.1.1.6 | Columnm013FrxPortDefaultBridgingAdminStatus | read-write | mandatory | If set to enabled, enables Default Bridging. If set to disabled, disables Default Bridging. |
| 1.3.6.1.4.1.800.2.25.3.1.1.7 | Columnm013FrxPortDefaultBridgingVLAN | read-write | mandatory | The default VLAN for new PVCs that have not been configured for the Bridging Service. A value of zero(0) indicates that unconfigured VCs will not perform a bri… |
| 1.3.6.1.4.1.800.2.25.3.1.1.8 | Columnm013FrxPortDefaultBridgingMode | read-write | mandatory | The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY |
| 1.3.6.1.4.1.800.2.25.3.1.1.9 | Columnm013FrxPortDynamicVCCreation | read-write | mandatory | If set to enabled, enables Dynamic VC creation. If set to disabled, disables Dynamic VC creation. |
| 1.3.6.1.4.1.800.2.25.4 | Nodem013FrxVcControlGroup | |||
| 1.3.6.1.4.1.800.2.25.4.1 | Tablem013FrxVcControlTable | not-accessible | mandatory | A table of Frame Relay virtual circuit configuration and control information. |
| 1.3.6.1.4.1.800.2.25.4.1.1 | Rowm013FrxVcControlEntry | not-accessible | mandatory | An entry in the table, containing information about the Frame Relay virtual circuit statistics. |
| 1.3.6.1.4.1.800.2.25.4.1.1.1 | Columnm013FrxVcControlSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.25.4.1.1.2 | Columnm013FrxVcControlPortIndex | read-only | mandatory | A per-slot unique value which identifies this HDLC logical port. |
| 1.3.6.1.4.1.800.2.25.4.1.1.3 | Columnm013FrxVcControlDlci | read-only | mandatory | A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit. |
| 1.3.6.1.4.1.800.2.25.4.1.1.4 | Columnm013FrxVcControlIpRoutingAdminStatus | read-write | mandatory | If set to enabled, enables IP Routing. If set to disabled, disables IP Routing |
| 1.3.6.1.4.1.800.2.25.5 | Nodem013FrxVcStatsGroup | |||
| 1.3.6.1.4.1.800.2.25.5.1 | Tablem013FrxVcStatsTable | not-accessible | mandatory | A table of Frame Relay virtual circuit statistics information. |
| 1.3.6.1.4.1.800.2.25.5.1.1 | Rowm013FrxVcStatsEntry | not-accessible | mandatory | An entry in the table, containing information about the Frame Relay virtual circuit statistics. |
| 1.3.6.1.4.1.800.2.25.5.1.1.1 | Columnm013FrxVcStatsSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.25.5.1.1.2 | Columnm013FrxVcStatsPortIndex | read-only | mandatory | A per-slot unique value which identifies this HDLC logical port. |
| 1.3.6.1.4.1.800.2.25.5.1.1.3 | Columnm013FrxVcStatsDlci | read-only | mandatory | A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.4 | Columnm013FrxVcStatsTxIPOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.5 | Columnm013FrxVcStatsTxIPFrames | read-only | mandatory | The total number of transmitted routed IP format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.6 | Columnm013FrxVcStatsRxIPOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.7 | Columnm013FrxVcStatsRxIPFrames | read-only | mandatory | The total number of received routed IP format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.8 | Columnm013FrxVcStatsTxIPXOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.9 | Columnm013FrxVcStatsTxIPXFrames | read-only | mandatory | The total number of transmitted routed IPX format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.10 | Columnm013FrxVcStatsRxIPXOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.11 | Columnm013FrxVcStatsRxIPXFrames | read-only | mandatory | The total number of received routed IPX format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.12 | Columnm013FrxVcStatsTxBPDUOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.13 | Columnm013FrxVcStatsTxBPDUFrames | read-only | mandatory | The total number of transmitted BPDU frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.14 | Columnm013FrxVcStatsRxBPDUOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.15 | Columnm013FrxVcStatsRxBPDUFrames | read-only | mandatory | The total number of received BPDU frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.16 | Columnm013FrxVcStatsTxEthernetOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.17 | Columnm013FrxVcStatsTxEthernetFrames | read-only | mandatory | The total number of transmitted bridged 802.3 format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.18 | Columnm013FrxVcStatsRxEthernetOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.19 | Columnm013FrxVcStatsRxEthernetFrames | read-only | mandatory | The total number of received bridged 802.3 format frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.20 | Columnm013FrxVcStatsTx8025Octets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.21 | Columnm013FrxVcStatsTx8025Frames | read-only | mandatory | The total number of transmitted 8025 frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.22 | Columnm013FrxVcStatsRx8025Octets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.23 | Columnm013FrxVcStatsRx8025Frames | read-only | mandatory | The total number of received 8025 frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.24 | Columnm013FrxVcStatsTxFDDIOctets | read-only | mandatory | The total number of transmitted octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.25 | Columnm013FrxVcStatsTxFDDIFrames | read-only | mandatory | The total number of transmitted FDDI frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.26 | Columnm013FrxVcStatsRxFDDIOctets | read-only | mandatory | The total number of received octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.5.1.1.27 | Columnm013FrxVcStatsRxFDDIFrames | read-only | mandatory | The total number of received FDDI frames on this virtual circuit. |
| 1.3.6.1.4.1.800.2.25.6 | Nodem013PppxConfigGroup | |||
| 1.3.6.1.4.1.800.2.25.6.1 | Tablem013PppxConfigTable | not-accessible | mandatory | A table of PPP protocol entity configuration information. |
| 1.3.6.1.4.1.800.2.25.6.1.1 | Rowm013PppxConfigEntry | not-accessible | mandatory | An entry in the PPP Entity Configuration table, containing information about PPP protocol configuration. |
| 1.3.6.1.4.1.800.2.25.6.1.1.1 | Columnm013PppxConfigSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.25.6.1.1.2 | Columnm013PppxConfigPortIndex | read-only | mandatory | A per-slot unique value which identifies this HDLC logical port. |
| 1.3.6.1.4.1.800.2.25.6.1.1.3 | Columnm013PppxConfigDescription | read-write | mandatory | A description for this PPP port. |
| 1.3.6.1.4.1.800.2.25.6.1.1.4 | Columnm013PppxConfigAdminStatus | read-write | mandatory | This object controls the Administrative Status of this PPP Entity. Enabled will allow the PPP Entity to operate. Disabled will disable the PPP Entity without d… |
| 1.3.6.1.4.1.800.2.25.6.1.1.5 | Columnm013PppxConfigMode | read-write | mandatory | This object controls whether or not Multilink PPP will be used. |
| 1.3.6.1.4.1.800.2.25.6.1.1.6 | Columnm013PppxConfigIpConfigAdminStatus | read-write | mandatory | The immediate desired status of the IP network protocol. Setting this object to open will inject an administrative open event into the IP network protocol's fi… |
| 1.3.6.1.4.1.800.2.25.6.1.1.7 | Columnm013PppxConfigBcpConfigAdminStatus | read-write | mandatory | The immediate desired status of the BCP network protocol. Setting this object to open will inject an administrative open event into the BCP network protocol's … |
| 1.3.6.1.4.1.800.2.25.6.1.1.8 | Columnm013PppxConfigIpxConfigAdminStatus | read-write | mandatory | The immediate desired status of the IPX network protocol. Setting this object to open will inject an administrative open event into the IPX network protocol's … |
| 1.3.6.1.4.1.800.2.25.6.1.1.9 | Columnm013PppxConfigRemoteIpAddress | read-write | mandatory | The Remote IP address of the PPP connection. If set to 0.0.0.0 and IP routing is enabled then the IP address will be learned during the IP LCP negotiation. If … |
| 1.3.6.1.4.1.800.2.25.6.1.1.10 | Columnm013PppxConfigAuthenticationType | read-write | mandatory | The desired Authentication protocol to use for this PPP connection. |
| 1.3.6.1.4.1.800.2.25.6.1.1.11 | Columnm013PppxConfigUserIdToRemote | read-write | mandatory | User ID sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur. |
| 1.3.6.1.4.1.800.2.25.6.1.1.12 | Columnm013PppxConfigPasswordToRemote | read-write | mandatory | Password sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur. |
| 1.3.6.1.4.1.800.2.25.6.1.1.13 | Columnm013PppxConfigUserIdFromRemote | read-write | mandatory | User ID expected to be received remote during PAP or CHAP Authentication. If this string is empty, then no remote to local authentication will be required. |
| 1.3.6.1.4.1.800.2.25.6.1.1.14 | Columnm013PppxConfigPasswordFromRemote | read-write | mandatory | Password expected to be received remote during PAP or CHAP Authentication. If this string is empty, then no remote to local authentication will be required. |
| 1.3.6.1.4.1.800.2.25.6.1.1.15 | Columnm013PppxConfigMaxFailureCount | read-write | mandatory | PPP LCP and NCP Negotiation Maximum Failure Count |
| 1.3.6.1.4.1.800.2.25.6.1.1.16 | Columnm013PppxConfigMaxConfigureCount | read-write | mandatory | PPP LCP Negotiation Maximum Configure Count |
| 1.3.6.1.4.1.800.2.25.6.1.1.17 | Columnm013PppxConfigMaxTerminateCount | read-write | mandatory | PPP LCP Negotiation Maximum Terminate Count |
| 1.3.6.1.4.1.800.2.25.6.1.1.18 | Columnm013PppxConfigRetryTimeout | read-write | mandatory | PPP LCP Negotiation Retry Timeout |
| 1.3.6.1.4.1.800.2.25.7 | Nodem013PppxCpGroup | |||
| 1.3.6.1.4.1.800.2.25.7.1 | Tablem013PppxCpTable | not-accessible | mandatory | A table of PPP connection Link Control and Network Control Protocol status and statistics information. |
| 1.3.6.1.4.1.800.2.25.7.1.1 | Rowm013PppxCpEntry | not-accessible | mandatory | An entry in the table, containing information about the PPP LCP and NCP status and statistics. |
| 1.3.6.1.4.1.800.2.25.7.1.1.1 | Columnm013PppxCpSlotIndex | read-only | mandatory | A unique value which identifies this WSM board slot that the PPP Control Protocol Entity is running on. |
| 1.3.6.1.4.1.800.2.25.7.1.1.2 | Columnm013PppxCpPortIndex | read-only | mandatory | A per-slot unique value which identifies this HDLC logical port. |
| 1.3.6.1.4.1.800.2.25.7.1.1.3 | Columnm013PppxCpIpOperStatus | read-only | mandatory | The operational status of the IP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the … |
| 1.3.6.1.4.1.800.2.25.7.1.1.4 | Columnm013PppxCpIpxOperStatus | read-only | mandatory | The operational status of the IPX network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the… |
| 1.3.6.1.4.1.800.2.25.7.1.1.5 | Columnm013PppxCpBcpOperStatus | read-only | mandatory | The operational status of the BCP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the… |
| 1.3.6.1.4.1.800.2.25.7.1.1.6 | Columnm013PppxCpTxLcpPackets | read-only | mandatory | The total number of transmitted Link Control Protocol packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.7.1.1.7 | Columnm013PppxCpRxLcpPackets | read-only | mandatory | The total number of received Link Control Protocol packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.7.1.1.8 | Columnm013PppxCpTxIpcpPackets | read-only | mandatory | The total number of transmitted IP Control Protocol packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.7.1.1.9 | Columnm013PppxCpRxIpcpPackets | read-only | mandatory | The total number of received IP Control Protocol packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.7.1.1.10 | Columnm013PppxCpTxIpxcpPackets | read-only | mandatory | The total number of transmitted IPX Control Protocol packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.7.1.1.11 | Columnm013PppxCpRxIpxcpPackets | read-only | mandatory | The total number of received IPX Control Protocol packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.7.1.1.12 | Columnm013PppxCpTxBcpPackets | read-only | mandatory | The total number of transmitted Bridge Control Protocol packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.7.1.1.13 | Columnm013PppxCpRxBcpPackets | read-only | mandatory | The total number of received Bridge Control Protocol packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8 | Nodem013PppxStatsGroup | |||
| 1.3.6.1.4.1.800.2.25.8.1 | Tablem013PppxStatsTable | not-accessible | mandatory | A table of PPP connection statistics information. |
| 1.3.6.1.4.1.800.2.25.8.1.1 | Rowm013PppxStatsEntry | not-accessible | mandatory | An entry in the table, containing information about the PPP PPP connection statistics. |
| 1.3.6.1.4.1.800.2.25.8.1.1.1 | Columnm013PppxStatsSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot that this PPP link is running on. |
| 1.3.6.1.4.1.800.2.25.8.1.1.2 | Columnm013PppxStatsPortIndex | read-only | mandatory | A per-slot unique value which identifies HDLC channel that this PPP link is running on. |
| 1.3.6.1.4.1.800.2.25.8.1.1.3 | Columnm013PppxStatsTxIPOctets | read-only | mandatory | The total number of transmitted octets (including the PPP Header field) within routed IP format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.4 | Columnm013PppxStatsTxIPPackets | read-only | mandatory | The total number of transmitted routed IP format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.5 | Columnm013PppxStatsRxIPOctets | read-only | mandatory | The total number of received octets (including the PPP Header field) within routed IP format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.6 | Columnm013PppxStatsRxIPPackets | read-only | mandatory | The total number of received routed IP format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.7 | Columnm013PppxStatsTxIPXOctets | read-only | mandatory | The total number of transmitted octets (including the PPP Header field) within routed IPX format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.8 | Columnm013PppxStatsTxIPXPackets | read-only | mandatory | The total number of transmitted routed IPX format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.9 | Columnm013PppxStatsRxIPXOctets | read-only | mandatory | The total number of received octets (including the PPP Header field) within routed IPX format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.10 | Columnm013PppxStatsRxIPXPackets | read-only | mandatory | The total number of received routed IPX format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.11 | Columnm013PppxStatsTxBPDUOctets | read-only | mandatory | The total number of transmitted octets (including the PPP Header field) within BPDU packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.12 | Columnm013PppxStatsTxBPDUPackets | read-only | mandatory | The total number of transmitted BPDU packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.13 | Columnm013PppxStatsRxBPDUOctets | read-only | mandatory | The total number of received octets (including the PPP Header field) within BPDU packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.14 | Columnm013PppxStatsRxBPDUPackets | read-only | mandatory | The total number of received BPDU packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.15 | Columnm013PppxStatsTxEthernetOctets | read-only | mandatory | The total number of transmitted octets (including the PPP Header field) within bridged 802.3 format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.16 | Columnm013PppxStatsTxEthernetPackets | read-only | mandatory | The total number of transmitted bridged 802.3 format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.17 | Columnm013PppxStatsRxEthernetOctets | read-only | mandatory | The total number of received octets (including the PPP Header field) within bridged 802.3 format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.18 | Columnm013PppxStatsRxEthernetPackets | read-only | mandatory | The total number of received bridged 802.3 format packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.19 | Columnm013PppxStatsTx8025Octets | read-only | mandatory | The total number of transmitted octets (including the PPP Header field) within 8025 packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.20 | Columnm013PppxStatsTx8025Packets | read-only | mandatory | The total number of transmitted 8025 packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.21 | Columnm013PppxStatsRx8025Octets | read-only | mandatory | The total number of received octets (including the PPP Header field) within 8025 packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.22 | Columnm013PppxStatsRx8025Packets | read-only | mandatory | The total number of received 8025 packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.23 | Columnm013PppxStatsTxFDDIOctets | read-only | mandatory | The total number of transmitted octets (including the PPP Header field) within FDDI packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.24 | Columnm013PppxStatsTxFDDIPackets | read-only | mandatory | The total number of transmitted FDDI packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.25 | Columnm013PppxStatsRxFDDIOctets | read-only | mandatory | The total number of received octets (including the PPP Header field) within FDDI packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.8.1.1.26 | Columnm013PppxStatsRxFDDIPackets | read-only | mandatory | The total number of received FDDI packets on this PPP connection. |
| 1.3.6.1.4.1.800.2.25.9 | Nodem013IPRouterGroup | |||
| 1.3.6.1.4.1.800.2.25.9.1 | Tablem013IPRouterIfTable | not-accessible | mandatory | A list of M013 Router instances in this physical OmniSwitch. |
| 1.3.6.1.4.1.800.2.25.9.1.1 | Rowm013IPRouterIfEntry | not-accessible | mandatory | A VLAN entry. |
| 1.3.6.1.4.1.800.2.25.9.1.1.1 | Columnm013IPRouterIfSlotIndex | read-only | mandatory | Slot for channel being provisioned. |
| 1.3.6.1.4.1.800.2.25.9.1.1.2 | Columnm013IPRouterIfLogicalPortIndex | read-only | mandatory | A per-slot unique HDLC channel number. |
| 1.3.6.1.4.1.800.2.25.9.1.1.3 | Columnm013IPRouterIfAddress | read-only | mandatory | The IP address for this IP interface |
| 1.3.6.1.4.1.800.2.25.9.1.1.4 | Columnm013IPRouterIfSubNetMask | read-write | mandatory | The IP network subnet mask for this IP interface |
| 1.3.6.1.4.1.800.2.25.9.1.1.5 | Columnm013IPRouterIfBcastAddress | read-write | mandatory | The IP broadcast address for this IP interface |
| 1.3.6.1.4.1.800.2.25.9.1.1.6 | Columnm013IPRouterIfDescription | read-write | optional | Textual description of the router instance. |
| 1.3.6.1.4.1.800.2.25.9.1.1.7 | Columnm013IPRouterIfAdmStatus | read-write | mandatory | The particular routing environment can be enable(1) or disable(2) (or delete (3)) upon user's request. |
| 1.3.6.1.4.1.800.2.25.9.1.1.8 | Columnm013IPRouterIfOperStatus | read-only | mandatory | Provide operating status of a particular router envirnment. |
| 1.3.6.1.4.1.800.2.25.9.1.1.9 | Columnm013IPRouterIfFramingType | read-write | mandatory | Provides the ability to set the outbound frame type for IP traffic. The default frame type is Ethernet. If the frame type is incompatible with the transmitting… |
| 1.3.6.1.4.1.800.2.25.9.1.1.10 | Columnm013IPRouterIfMtu | read-write | mandatory | Provides the ability to set the MTU size for this IP interface. The default size is 1500 |
| 1.3.6.1.4.1.800.2.25.9.1.1.11 | Columnm013IPRouterIfProtocol | read-write | mandatory | The routing protocol(s) for this m013 router port. Which are: ipOther(1), ipRip(2), ipOspf(4), ipBgp(8), ipHello(16), ipIs-is(32) |
| 1.3.6.1.4.1.800.2.25.10 | Nodem013Dsx3Group | |||
| 1.3.6.1.4.1.800.2.25.10.1 | Tablem013Dsx3ConfigTable | not-accessible | mandatory | The DS3 Configuration table. |
| 1.3.6.1.4.1.800.2.25.10.1.1 | Rowm013Dsx3ConfigEntry | not-accessible | mandatory | An entry in the DS3 Configuration table. |
| 1.3.6.1.4.1.800.2.25.10.1.1.1 | Columnm013Dsx3LineIndex | read-only | mandatory | This object is the identifier of a DS3 port on a managed device. |
| 1.3.6.1.4.1.800.2.25.10.1.1.2 | Columnm013Dsx3ChannelizedMode | read-write | mandatory | This object controls whether or not DS3 port is channelized. The default mode is enabled which means that this port is channelized to 28 T1s. |
| 1.3.6.1.4.1.800.2.25.10.1.1.3 | Columnm013Dsx3MdlEIC | read-write | mandatory | MDL Equipment Identification Code (EIC). |
| 1.3.6.1.4.1.800.2.25.10.1.1.4 | Columnm013Dsx3MdlLIC | read-write | mandatory | MDL Location Identification Code (LIC). |
| 1.3.6.1.4.1.800.2.25.10.1.1.5 | Columnm013Dsx3MdlFIC | read-write | mandatory | MDL Frame Identification Code (FIC). |
| 1.3.6.1.4.1.800.2.25.10.1.1.6 | Columnm013Dsx3MdlUNIT | read-write | mandatory | MDL Unit Identification Code (UNIT). |
| 1.3.6.1.4.1.800.2.25.10.1.1.7 | Columnm013Dsx3MdlPFI | read-write | mandatory | MDL Path Facility Identification Code (PFI). |
| 1.3.6.1.4.1.800.2.25.10.1.1.8 | Columnm013Dsx3MdlPortIdleSignalCode | read-write | mandatory | MDL Port Idle Signal Code |
| 1.3.6.1.4.1.800.2.25.10.1.1.9 | Columnm013Dsx3MdlGenerator | read-write | mandatory | MDL Generator. |
| 1.3.6.1.4.1.800.2.25.10.1.1.10 | Columnm013Dsx3MdlTransmitPath | read-write | mandatory | Enables the MDL path message transmission. |
| 1.3.6.1.4.1.800.2.25.10.1.1.11 | Columnm013Dsx3MdlTransmitIdleSignal | read-write | mandatory | Enables the MDL idle signal message transmission. |
| 1.3.6.1.4.1.800.2.25.10.1.1.12 | Columnm013Dsx3MdlTransmitTestSignal | read-write | mandatory | Enables the MDL test signal message transmission. |
| 1.3.6.1.4.1.800.2.25.10.1.1.13 | Columnm013Dsx3FEACEnable | read-write | mandatory | Allows the DS3 to send the following alarms on the FEAC channel when detected locally: - DS3 Equipment Failure - LOS - OOF - AIS Received . |
| 1.3.6.1.4.1.800.2.25.10.1.1.14 | Columnm013Dsx3REIEnable | read-write | mandatory | Allows the DS3 to send Remote Error Indications. |
| 1.3.6.1.4.1.800.2.25.10.1.1.15 | Columnm013Dsx3RxMdlEnable | read-write | mandatory | Allows the DS3 to receive MDL messages. |
| 1.3.6.1.4.1.800.2.25.10.1.1.16 | Columnm013Dsx3RxMdlEIC | read-write | mandatory | Received MDL Equipment Identification Code (EIC). |
| 1.3.6.1.4.1.800.2.25.10.1.1.17 | Columnm013Dsx3RxMdlLIC | read-write | mandatory | Received MDL Location Identification Code (LIC). |
| 1.3.6.1.4.1.800.2.25.10.1.1.18 | Columnm013Dsx3RxMdlFIC | read-write | mandatory | Received MDL Frame Identification Code (FIC). |
| 1.3.6.1.4.1.800.2.25.10.1.1.19 | Columnm013Dsx3RxMdlUNIT | read-write | mandatory | Received MDL Unit Identification Code (UNIT). |
| 1.3.6.1.4.1.800.2.25.10.1.1.20 | Columnm013Dsx3RxMdlPFI | read-write | mandatory | Received MDL Path Facility Identification Code (PFI). |
| 1.3.6.1.4.1.800.2.25.10.1.1.21 | Columnm013Dsx3RxMdlPortIdleSignalCode | read-write | mandatory | Received MDL Port Idle Signal Code |
| 1.3.6.1.4.1.800.2.25.10.1.1.22 | Columnm013Dsx3RxMdlGenerator | read-write | mandatory | Received MDL Generator. |
| 1.3.6.1.4.1.800.2.25.10.1.1.23 | Columnm013Dsx3RemoteStatus | read-only | mandatory | This variable indicates the Remote Line Status of the interface. |
| 1.3.6.1.4.1.800.2.25.10.1.1.24 | Columnm013Dsx3RemoteStatusLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time the Remote DS3/E3 entered its current line status state. If the current state was entered prior to the last … |
| 1.3.6.1.4.1.800.2.25.10.1.1.25 | Columnm013Dsx3LedStatus | read-only | mandatory | The LED state for this M013 Port. M013 module has 5 LEDs per port. The current bit definitions for the DS3 Port are: T3EN 0 - GRN OFF (0 off, 1 on) LOS 1 - RED… |
| 1.3.6.1.4.1.800.2.25.10.1.1.26 | Columnm013Dsx3Ds1StatsEnableMask | read-write | mandatory | This is a 28 bit mask which allows selectively enable/disable stats collection on a particular DS1 within DS3 port. Each bit corresponds to one of the 28 DS1 w… |
| 1.3.6.1.4.1.800.2.25.10.2 | Tablem013Dsx3StatsTable | not-accessible | mandatory | The DS3 Statistics table. |
| 1.3.6.1.4.1.800.2.25.10.2.1 | Rowm013Dsx3StatsEntry | not-accessible | mandatory | An entry in the DS3 Statistics table. |
| 1.3.6.1.4.1.800.2.25.10.2.1.1 | Columnm013Dsx3StatsLineIndex | read-only | mandatory | This object is the identifier of a DS3 port on a managed device. |
| 1.3.6.1.4.1.800.2.25.10.2.1.2 | Columnm013Dsx3StatsRxREI | read-only | mandatory | The number of Remote Error Indications received. |
| 1.3.6.1.4.1.800.2.25.10.2.1.3 | Columnm013Dsx3StatsRxFEAC | read-only | mandatory | This object indicates the presence FEAC being received by this port. This object only applies to DS3 interface with framing format configured to C-bit parity. … |
| 1.3.6.1.4.1.800.2.25.11 | Nodem013Dsx1Group | |||
| 1.3.6.1.4.1.800.2.25.11.1 | Tablem013Dsx1ConfigTable | not-accessible | mandatory | The DS1 Configuration table. |
| 1.3.6.1.4.1.800.2.25.11.1.1 | Rowm013Dsx1ConfigEntry | not-accessible | mandatory | An entry in the DS3 Configuration table. |
| 1.3.6.1.4.1.800.2.25.11.1.1.1 | Columnm013Dsx1LineIndex | read-only | mandatory | This object is the identifier of a DS1 port on a managed device. |
| 1.3.6.1.4.1.800.2.25.11.1.1.2 | Columnm013Dsx1T1BertPattern | read-write | mandatory | This variable represents T1 BERT Pattern configuration. The values mean: 1 - 2^15-1, pseudo-random O.151 test pattern (32767-bit long) 2 - 2^20-1, pseudo-rando… |
| 1.3.6.1.4.1.800.2.25.11.1.1.3 | Columnm013Dsx1T1BertInterval | read-write | mandatory | T1 BERT Interval |
| 1.3.6.1.4.1.800.2.25.11.1.1.4 | Columnm013Dsx1T1BertFraming | read-write | mandatory | T1 BERT Framing |
| 1.3.6.1.4.1.800.2.25.11.1.1.5 | Columnm013Dsx1T1BertTestEnable | read-write | mandatory | T1 BERT Start/Stop |
| 1.3.6.1.4.1.800.2.25.11.1.1.6 | Columnm013Dsx1RemoteStatus | read-only | mandatory | This variable indicates the Remote Line Status of the interface. |
| 1.3.6.1.4.1.800.2.25.11.1.1.7 | Columnm013Dsx1RemoteStatusLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time the Remote DS1 entered its current line status state. If the current state was entered prior to the last re-… |