XYLAN-PORT-MIB

114 objects

No module-level DESCRIPTION found.

Imported Objects

BRIDGE-MIB	MacAddress
RFC-1212	OBJECT-TYPE
RFC1155-SMI	Counter
RFC1213-MIB	DisplayString
XYLAN-BASE-MIB	xylanVportArch

OID	Name	Access	Status	Description
1.3.6.1.4.1.800.2.3.1	NodevirtualPort
1.3.6.1.4.1.800.2.3.1.1	TablevportTable	not-accessible	mandatory	A list of Virtual Port instances.
1.3.6.1.4.1.800.2.3.1.1.1	RowvportEntry	not-accessible	mandatory	A Virtual Port entry.
1.3.6.1.4.1.800.2.3.1.1.1.1	ColumnvportNumber	read-write	mandatory	A unique number identifies this Virtual Port instance within the physical OmniSwitch. This number is NOT meant for user consumption.
1.3.6.1.4.1.800.2.3.1.1.1.2	ColumnvportSlot	read-write	mandatory	The physical slot number for this port instance (vport).
1.3.6.1.4.1.800.2.3.1.1.1.3	ColumnvportIF	read-write	mandatory	The on-board interface number.
1.3.6.1.4.1.800.2.3.1.1.1.4	ColumnvportFuncType	read-write	mandatory	The function for this vport. ie. local, remote, atm.
1.3.6.1.4.1.800.2.3.1.1.1.5	ColumnvportFuncTypeInstance	read-write	mandatory	The specific instance of this slot/IF/type. For 'most' interface types this will always be 1. The exception is an ATM connected port.
1.3.6.1.4.1.800.2.3.1.1.1.6	ColumnvportVlanNumber	read-write	mandatory	The VLAN that this virtual port belongs to. The default for row creation is 1.
1.3.6.1.4.1.800.2.3.1.1.1.7	ColumnvportMACaddress	read-only	mandatory	The MAC address represented by this Virtual Port. This value is returned upon row creation and attachment.
1.3.6.1.4.1.800.2.3.1.1.1.8	ColumnvportBridgeProtocol	read-write	mandatory	The type of bridge protocol supported for this service. The default rfor row creation is transparent(3).
1.3.6.1.4.1.800.2.3.1.1.1.9	ColumnvportEncapsulation	read-write	mandatory	The frame encapsulation translation to be used for this particular port. The value indicates the frame format required for the output interface. The default fo…
1.3.6.1.4.1.800.2.3.1.1.1.10	ColumnvportBrdgMode	read-write	mandatory	If vportFuncType is either localBridge(1) or localOpSwitch(2) type, setting this field to autoSwitch(3), the default, will allow the port to switch between the…
1.3.6.1.4.1.800.2.3.1.1.1.11	ColumnvportSwitchTimer	read-write	mandatory	The time out period for a Bridged port to convert to a switch optimized mode in seconds if vportBrdgMode is set to autoSwitch(1). Setting it to zero will cause…
1.3.6.1.4.1.800.2.3.1.1.1.12	ColumnvportDescription	read-write	mandatory	A string to identify the instance of this port.
1.3.6.1.4.1.800.2.3.1.1.1.13	ColumnvportAdmStatus	read-write	mandatory	The administrative status of this port which the user can attach or detach during configuration. The attached port can also be switched to disable(1) or enable…
1.3.6.1.4.1.800.2.3.1.1.1.14	ColumnvportOperStatus	read-only	mandatory	The operational status of this virtual port. This is called slot/if/type/instance???. Note that if the card is removed for this slot, the service will be marke…
1.3.6.1.4.1.800.2.3.1.1.1.15	ColumnvportFrameIns	read-only	mandatory	The number of frames received from this port.
1.3.6.1.4.1.800.2.3.1.1.1.16	ColumnvportInOctets	read-only	mandatory	The total number of octets received from this port.
1.3.6.1.4.1.800.2.3.1.1.1.17	ColumnvportInUcastPkts	read-only	mandatory	The total number of subnetwork-unicast packets received.
1.3.6.1.4.1.800.2.3.1.1.1.18	ColumnvportInNUcastPkts	read-only	mandatory	The total number of non-unicast packets received.
1.3.6.1.4.1.800.2.3.1.1.1.19	ColumnvportInBufDiscs	read-only	mandatory	The number of inbound frames discarded from this port due to receive queue overrun.
1.3.6.1.4.1.800.2.3.1.1.1.20	ColumnvportInErrDiscs	read-only	mandatory	The number of inbound frames discarded from this port due to error.
1.3.6.1.4.1.800.2.3.1.1.1.21	ColumnvportFrameOuts	read-only	mandatory	The number of frames transmitted from this port.
1.3.6.1.4.1.800.2.3.1.1.1.22	ColumnvportOutOctets	read-only	mandatory	The total number of octets transmitted from this port.
1.3.6.1.4.1.800.2.3.1.1.1.23	ColumnvportOutUcastPkts	read-only	mandatory	The total number of subnetwork-unicast packets transmitted.
1.3.6.1.4.1.800.2.3.1.1.1.24	ColumnvportOutNUcastPkts	read-only	mandatory	The total number of non-unicast packets transmitted.
1.3.6.1.4.1.800.2.3.1.1.1.25	ColumnvportOutBufDiscs	read-only	mandatory	The number of outbound frames discarded from this port due to transmit queue overrun.
1.3.6.1.4.1.800.2.3.1.1.1.26	ColumnvportOutErrDiscs	read-only	mandatory	The number of outbound frames discarded from this port due to error.
1.3.6.1.4.1.800.2.3.1.1.1.27	ColumnvportFloodLimit	read-write	mandatory	The amount of flooded bandwidth in byte / second that may be transmitted on this port.
1.3.6.1.4.1.800.2.3.1.1.1.28	ColumnvportVLANMembership	read-only	mandatory	This object is a bit mask with each bit that is set indicating that the VLAN given by the bit position is active on this port.
1.3.6.1.4.1.800.2.3.1.1.1.29	ColumnvportManualMode	read-write	mandatory	This setting permits the user to manually set the spanning tree state of the given port. It is designed primarily for those virtual ports that can not utilize …
1.3.6.1.4.1.800.2.3.1.1.1.30	ColumnvportMVLANMembership	read-only	mandatory	This object is a bit mask with each bit that is set indicating that the Multicast VLAN given by the bit position is active on this port.
1.3.6.1.4.1.800.2.3.1.1.1.31	ColumnvportFloodLimitDiscs	read-only	mandatory	The number of outbound frames discarded from this port due to the flood limit being exceed.
1.3.6.1.4.1.800.2.3.1.1.1.32	ColumnvportIfIndex	read-only	mandatory	The MIB-2 interface table 'ifIndex' assigned to this virtual port.
1.3.6.1.4.1.800.2.3.1.2	TablevportSwitchTable	not-accessible	mandatory	A list of Virtual Port instances.
1.3.6.1.4.1.800.2.3.1.2.2	RowvportSwitchEntry	not-accessible	mandatory	A Virtual Port Switch Options entry.
1.3.6.1.4.1.800.2.3.1.2.2.1	ColumnvportSwitchSlot	read-write	mandatory	The physical slot number for this port instance (vport).
1.3.6.1.4.1.800.2.3.1.2.2.2	ColumnvportSwitchIF	read-write	mandatory	The on-board interface number.
1.3.6.1.4.1.800.2.3.1.2.2.3	ColumnvportSwitchFuncType	read-write	mandatory	The function for this vport. ie. local, remote, atm.
1.3.6.1.4.1.800.2.3.1.2.2.4	ColumnvportSwitchFuncTypeInstance	read-write	mandatory	The specific instance of this slot/IF/type. For 'most' interface types this will always be 1. The exception is an ATM connected port.
1.3.6.1.4.1.800.2.3.1.2.2.5	ColumnvportSwitchipEthertype	read-write	mandatory	A Virtual Port Switch translation option for IP Ethertype traffic.
1.3.6.1.4.1.800.2.3.1.2.2.6	ColumnvportSwitchipSnap	read-write	mandatory	A Virtual Port Switch translation option for IP SNAP traffic.
1.3.6.1.4.1.800.2.3.1.2.2.7	ColumnvportSwitchipxEthertype	read-write	mandatory	A Virtual Port Switch translation option for IPX Ethertype traffic.
1.3.6.1.4.1.800.2.3.1.2.2.8	ColumnvportSwitchipxProp	read-write	mandatory	A Virtual Port Switch translation option for IPX 802.3 traffic.
1.3.6.1.4.1.800.2.3.1.2.2.9	ColumnvportSwitchipxLlc	read-write	mandatory	A Virtual Port Switch translation option for IPX 802.2 traffic.
1.3.6.1.4.1.800.2.3.1.2.2.10	ColumnvportSwitchipxSnap	read-write	mandatory	A Virtual Port Switch translation option for IPX SNAP traffic.
1.3.6.1.4.1.800.2.3.1.3	TablevportSwitchDefaultTable	not-accessible	mandatory	A list of Media instances.
1.3.6.1.4.1.800.2.3.1.3.2	RowvportSwitchDefaultEntry	not-accessible	mandatory	A Virtual Port Switch Options entry.
1.3.6.1.4.1.800.2.3.1.3.2.1	ColumnvportSwitchDefaultIndex	read-write	mandatory	The index selecting which media type default is to be configured/viewed.
1.3.6.1.4.1.800.2.3.1.3.2.2	ColumnvportSwitchDefaultipEthertype	read-write	mandatory	A Virtual Port Switch translation option for IP Ethertype traffic.
1.3.6.1.4.1.800.2.3.1.3.2.3	ColumnvportSwitchDefaultipSnap	read-write	mandatory	A Virtual Port Switch translation option for IP SNAP traffic.
1.3.6.1.4.1.800.2.3.1.3.2.4	ColumnvportSwitchDefaultipxEthertype	read-write	mandatory	A Virtual Port Switch translation option for IPX Ethertype traffic.
1.3.6.1.4.1.800.2.3.1.3.2.5	ColumnvportSwitchDefaultipxProp	read-write	mandatory	A Virtual Port Switch translation option for IPX 802.3 traffic.
1.3.6.1.4.1.800.2.3.1.3.2.6	ColumnvportSwitchDefaultipxLlc	read-write	mandatory	A Virtual Port Switch translation option for IPX LLC traffic.
1.3.6.1.4.1.800.2.3.1.3.2.7	ColumnvportSwitchDefaultipxSnap	read-write	mandatory	A Virtual Port Switch translation option for IPX SNAP traffic.
1.3.6.1.4.1.800.2.3.2	NodelogicalPort
1.3.6.1.4.1.800.2.3.3	NodephysicalPort
1.3.6.1.4.1.800.2.3.3.1	TablephyPortTable	not-accessible	mandatory	A list of Physical Port instances.
1.3.6.1.4.1.800.2.3.3.1.1	RowphyPortEntry	not-accessible	mandatory	A Physical Port entry.
1.3.6.1.4.1.800.2.3.3.1.1.1	ColumnphyPortSlot	read-only	mandatory	The physical slot number for this port.
1.3.6.1.4.1.800.2.3.3.1.1.2	ColumnphyPortIF	read-only	mandatory	The on-board interface number.
1.3.6.1.4.1.800.2.3.3.1.1.3	ColumnphyPortMediaType	read-only	mandatory	The device type of this physical port
1.3.6.1.4.1.800.2.3.3.1.1.4	ColumnphyPortDescription	read-write	mandatory	A string to identify the instance of this port.
1.3.6.1.4.1.800.2.3.3.1.1.5	ColumnphyPortAdmStatus	read-write	mandatory	The administrative status of this port. The user can enable or disable this physical port.
1.3.6.1.4.1.800.2.3.3.1.1.6	ColumnphyPortOperStatus	read-only	mandatory	The operational status of this port.
1.3.6.1.4.1.800.2.3.3.1.1.7	ColumnphyPortFrameIns	read-only	mandatory	The number of frames received from this port.
1.3.6.1.4.1.800.2.3.3.1.1.8	ColumnphyPortInOctets	read-only	mandatory	The total number of octets received from this port.
1.3.6.1.4.1.800.2.3.3.1.1.9	ColumnphyPortInUcastPkts	read-only	mandatory	The total number of subnetwork-unicast packets received.
1.3.6.1.4.1.800.2.3.3.1.1.10	ColumnphyPortInNUcastPkts	read-only	mandatory	The total number of non-unicast packets received.
1.3.6.1.4.1.800.2.3.3.1.1.11	ColumnphyPortInBufDiscs	read-only	mandatory	The number of inbound frames discarded from this port due to receive queue overrun.
1.3.6.1.4.1.800.2.3.3.1.1.12	ColumnphyPortInErrDiscs	read-only	mandatory	The number of inbound frames discarded from this port due to error.
1.3.6.1.4.1.800.2.3.3.1.1.13	ColumnphyPortFrameOuts	read-only	mandatory	The number of frames transmitted from this port.
1.3.6.1.4.1.800.2.3.3.1.1.14	ColumnphyPortOutOctets	read-only	mandatory	The total number of octets transmitted from this port.
1.3.6.1.4.1.800.2.3.3.1.1.15	ColumnphyPortOutUcastPkts	read-only	mandatory	The total number of subnetwork-unicast packets transmitted.
1.3.6.1.4.1.800.2.3.3.1.1.16	ColumnphyPortOutNUcastPkts	read-only	mandatory	The total number of non-unicast packets transmitted.
1.3.6.1.4.1.800.2.3.3.1.1.17	ColumnphyPortOutBufDiscs	read-only	mandatory	The number of outbound frames discarded from this port due to transmit queue overrun.
1.3.6.1.4.1.800.2.3.3.1.1.18	ColumnphyPortOutErrDiscs	read-only	mandatory	The number of outbound frames discarded from this port due to error.
1.3.6.1.4.1.800.2.3.3.1.1.19	ColumnphyPortToInterface	read-only	mandatory	The interface number which instantiates the MIB-2 'ifTable' for this physical port. It is calculated as 'phyPortSlot' multipled by 100 plus 'phyPortIF' for thi…
1.3.6.1.4.1.800.2.3.3.1.1.20	ColumnphyPortFddiAdmMode	read-write	mandatory	The administrative mode of this FDDI port. The user can set this port to either station(2) of concentrator(3) mode. NOTE: this does not take effect until the S…
1.3.6.1.4.1.800.2.3.3.1.1.21	ColumnphyPortFddiOpMode	read-only	mandatory	The current station Operational Mode of this FDDI port. The Operational Mode will be invalid(1) for all but FDDI or CDDI boards.
1.3.6.1.4.1.800.2.3.3.1.1.22	ColumnphyPortFddiMacFlushMode	read-write	mandatory	The current MAC address flush mode (only valid for FDDI ports of mode concentrator). This controls whether MAC addresses will be flushed if any PHY port discon…
1.3.6.1.4.1.800.2.3.3.2	TablemesmConfTable	not-accessible	mandatory	A list of MESM Physical Port instances.
1.3.6.1.4.1.800.2.3.3.2.1	RowmesmConfEntry	not-accessible	mandatory	A MESM Physical Port entry.
1.3.6.1.4.1.800.2.3.3.2.1.1	ColumnmesmPortSlot	read-only	mandatory	The physical slot number for this MESM port.
1.3.6.1.4.1.800.2.3.3.2.1.2	ColumnmesmPortIF	read-only	mandatory	The on-board interface number for this MESM port.
1.3.6.1.4.1.800.2.3.3.2.1.3	ColumnmesmPortAutoNegotiate	read-write	mandatory	The current autonegotiate mode of this MESM port. This object decides if port line speed and duplex mode are controlled by the user or negotiated automatically.
1.3.6.1.4.1.800.2.3.3.2.1.4	ColumnmesmPortAutoSpeed	read-only	mandatory	The automatically detected port line speed of this MESM port.
1.3.6.1.4.1.800.2.3.3.2.1.5	ColumnmesmPortAutoDuplexMode	read-only	mandatory	The automatically detected port duplex mode of this MESM port.
1.3.6.1.4.1.800.2.3.3.2.1.6	ColumnmesmPortCfgSpeed	read-write	mandatory	The configured port line speed of this MESM port.
1.3.6.1.4.1.800.2.3.3.2.1.7	ColumnmesmPortCfgDuplexMode	read-write	mandatory	The configured port duplex mode of this MESM port.
1.3.6.1.4.1.800.2.3.3.3	ScalarphyPortPCause	not-accessible	mandatory	The cause for a port partitioning event. This object is not intended to be accessed directly. It is defined for use in port partitioning traps.
1.3.6.1.4.1.800.2.3.4	NodemirrorPort
1.3.6.1.4.1.800.2.3.4.1	TablemirrorTable	not-accessible	mandatory	A list of Virtual Port instances.
1.3.6.1.4.1.800.2.3.4.1.1	RowmirrorEntry	not-accessible	mandatory	A Virtual Port entry.
1.3.6.1.4.1.800.2.3.4.1.1.1	ColumnmirrorNumber	read-only	mandatory	A unique number identifies this Virtual Port instance within the physical OmniSwitch. This number is NOT meant for user consumption.
1.3.6.1.4.1.800.2.3.4.1.1.2	ColumnmirrorSlot	read-only	mandatory	The physical slot number for this port instance (mirror).
1.3.6.1.4.1.800.2.3.4.1.1.3	ColumnmirrorIF	read-only	mandatory	The on-board interface number.
1.3.6.1.4.1.800.2.3.4.1.1.4	ColumnmirrorFuncType	read-only	mandatory	The function for this Vport. ie. local, remote, atm.
1.3.6.1.4.1.800.2.3.4.1.1.5	ColumnmirrorFuncTypeInstance	read-only	mandatory	The specific instance of this slot/IF/type. For 'most' interface types this will always be 1. The exception is an ATM connected port.
1.3.6.1.4.1.800.2.3.4.1.1.6	ColumnmirrorMirroringSlot	read-write	mandatory	The physical slot number of the mirroring port.
1.3.6.1.4.1.800.2.3.4.1.1.7	ColumnmirrorMirroringIF	read-write	mandatory	The on-board interface number or the mirroring port.
1.3.6.1.4.1.800.2.3.4.1.1.8	ColumnmirrorMirroringFuncType	read-write	mandatory	The function for this Vport. ie. local, remote, atm.
1.3.6.1.4.1.800.2.3.4.1.1.9	ColumnmirrorMirroringFuncTypeInstance	read-write	mandatory	The specific instance of this slot/IF/type. For 'most' interface types this will always be 1. The exception is an ATM connected port.
1.3.6.1.4.1.800.2.3.4.1.1.10	ColumnmirrorStatus	read-write	mandatory	Whether mirroring is enabled or disabled for this port. prior to enabling mirroring, or at the same time all other read write values in this table for the same…
1.3.6.1.4.1.800.2.3.5	NodeechannelPort

Type Definitions

Name	Syntax	Status	Description
XylanMirrorEnableCodes	INTEGER { disable(1), enable(2) }
XylanPhyPortAdminStatCodes	INTEGER { disable(1), enable(2) }
XylanPhyPortTypeCodes	INTEGER { unknown(1), other(2), eth(3), x100eth(4), tr4m(5), tr16m(6), fddi(7), cddi(8), atm25(9), atm50(10), ds1(11), ds3(12), oc3(13), oc12(14), oc48(15), wsm(16), e1(18), e3(19), serial(21) }
XylanPortFuncCodes	INTEGER { unknown(1), other(2), router(3), bridge(4), trunk(5), atmtrunk(6), atmLANE(7), cip(8), atmMUX(9), vlmp80210(10), frtrunking(12), vlmpDBr(13), vlmp8021q(14), lsm (15), phyeth(203), phyx100eth(204), phytr4m(205), phytr16m(206), phyfddi(207), phycddi(208), phyatm25(209), phyatm50(210), phyds1(211), phyds3(212), phyoc3(213), phyoc12(214), phyoc48(215) }
XylanPortOperStatCodes	INTEGER { unknown(1), portDown(2), portUp(3) }
XylanVportAdminStatCodes	INTEGER { disable(1), enable(2), delete(3), create(4), modify(5) }
XylanVportEncapsulationCodes	INTEGER { switch(1),
XylanVportTranslationCodes	INTEGER { ethertype(1), llc(2), snap(3), prop(4), tunnel1(5), tunnel2(6) }

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

XYLAN-PORT-MIB

Bulk Translate

Search Vendor MIBs

Search Vendor Traps