XYLAN-XIP-MIB
34 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | MacAddress |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | IpAddress |
| XYLAN-BASE-MIB | xylanXIPArch |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.20.1 | NodexylanXIPGMAPconfig | |||
| 1.3.6.1.4.1.800.2.20.1.1 | ScalarxylanXIPGMAPstate | read-write | mandatory | Current state of the GMAP functionality. |
| 1.3.6.1.4.1.800.2.20.1.2 | ScalarxylanXIPGMAPgaptime | read-write | mandatory | The time in milliseconds for gaps between successive GMAP protocol packets. |
| 1.3.6.1.4.1.800.2.20.1.3 | ScalarxylanXIPGMAPupdatetime | read-write | mandatory | The time in seconds between GMAP update packet generation. |
| 1.3.6.1.4.1.800.2.20.1.4 | ScalarxylanXIPGMAPholdtime | read-write | mandatory | The time in minutes that the switch will remember information received in GMAP update packets. |
| 1.3.6.1.4.1.800.2.20.1.5 | ScalarxylanXIPGMAPLastTrapReason | read-only | mandatory | Reason for last GMAP update to not be applied. Valid reasons are: 0 - No trap has been sent 1 - Target group is an authenticated group 2 - Update would conflic… |
| 1.3.6.1.4.1.800.2.20.1.6 | ScalarxylanXIPGMAPLastTrapPort | read-only | mandatory | The virtual port number of the last port on which the GMAP change was not applied because of a conflict. |
| 1.3.6.1.4.1.800.2.20.1.7 | ScalarxylanXIPGMAPLastTrapMac | read-only | mandatory | The last MAC address for which a GMAP change was not applied because of a conflict. |
| 1.3.6.1.4.1.800.2.20.1.8 | ScalarxylanXIPGMAPLastTrapProtocol | read-only | mandatory | The protocol identifier of the last GMAP change that was not applied because of a conflict. |
| 1.3.6.1.4.1.800.2.20.1.9 | ScalarxylanXIPGMAPLastTrapGroup | read-only | mandatory | The group identifier of the last GMAP change that was not applied because of a conflict. |
| 1.3.6.1.4.1.800.2.20.1.10 | TablexylanXIPGMAPTable | not-accessible | mandatory | GMAP MAC address list. |
| 1.3.6.1.4.1.800.2.20.1.10.1 | RowxylanXIPGMAPTableEntry | not-accessible | mandatory | GMAP MAC address list. |
| 1.3.6.1.4.1.800.2.20.1.10.1.1 | ColumnxylanXIPGMAPMacAddr | read-only | mandatory | The MAC address of a GMAP entry. |
| 1.3.6.1.4.1.800.2.20.1.10.1.2 | ColumnxylanXIPGMAPProtocol | read-only | mandatory | The protocol identifier for a GMAP entry. |
| 1.3.6.1.4.1.800.2.20.1.10.1.3 | ColumnxylanXIPGMAPGroup | read-only | mandatory | The group identifier for a GMAP entry. |
| 1.3.6.1.4.1.800.2.20.1.10.1.4 | ColumnxylanXIPGMAPSrcSwitch | read-only | mandatory | The MAC address of the switch that provided the information for a GMAP entry. |
| 1.3.6.1.4.1.800.2.20.1.10.1.5 | ColumnxylanXIPGMAPFlags | read-only | mandatory | The flags for a GMAP entry. The least significant byte holds the router flags. The next byte contains the flags from auto-tracker. The most significant 2 bytes… |
| 1.3.6.1.4.1.800.2.20.1.10.1.6 | ColumnxylanXIPGMAPTimeout | read-only | mandatory | Seconds remaining before this entry will age out. |
| 1.3.6.1.4.1.800.2.20.2 | NodexylanXIPXMAPconfig | |||
| 1.3.6.1.4.1.800.2.20.2.1 | ScalarxylanXIPXMAPstate | read-write | mandatory | Current state of the XMAP agent. |
| 1.3.6.1.4.1.800.2.20.2.2 | ScalarxylanXIPXMAPdisctime | read-write | mandatory | The time in seconds for interval betweeen hello packets in the initial discovery phase of the XMAP protocol. |
| 1.3.6.1.4.1.800.2.20.2.3 | ScalarxylanXIPXMAPcommontime | read-write | mandatory | The time in seconds for the interval between hello packets at other than the discovery phase. |
| 1.3.6.1.4.1.800.2.20.2.4 | ScalarxylanXIPXMAPLastTrapReason | read-only | mandatory | Reason for last change of port status. Valid reasons are: 0 - no trap has been sent 1 - port added 2 - change of information on existing port 3 - port deleted |
| 1.3.6.1.4.1.800.2.20.2.5 | ScalarxylanXIPXMAPLastTrapPort | read-only | mandatory | The virtual port number of the port that most recently changed. |
| 1.3.6.1.4.1.800.2.20.2.6 | TablexylanXIPXMAPports | not-accessible | mandatory | XMAP adjacent switch, remote port, and group information. |
| 1.3.6.1.4.1.800.2.20.2.6.1 | RowxylanXIPXMAPPortentry | not-accessible | mandatory | XMAP adjacent switch, remote port, and group information. |
| 1.3.6.1.4.1.800.2.20.2.6.1.1 | ColumnxylanXIPXMAPAdjPort | read-only | mandatory | The local virtual port number which has an adjacent switch connected. |
| 1.3.6.1.4.1.800.2.20.2.6.1.2 | ColumnxylanXIPXMAPRemMac | read-only | mandatory | The MAC Address of the MPM in the adjacent switch. |
| 1.3.6.1.4.1.800.2.20.2.6.1.3 | ColumnxylanXIPXMAPRemPort | read-only | mandatory | The remote virtual port number in the adjacent switch. |
| 1.3.6.1.4.1.800.2.20.2.6.1.4 | ColumnxylanXIPXMAPRemGroup | read-only | mandatory | The remote group for the virtual port in the adjacent switch. |
| 1.3.6.1.4.1.800.2.20.2.7 | TablexylanXIPXMAPhosts | not-accessible | mandatory | XMAP adjacent switch IP address information. |
| 1.3.6.1.4.1.800.2.20.2.7.1 | RowxylanXIPXMAPHostentry | not-accessible | mandatory | XMAP adjacent switch IP address information. |
| 1.3.6.1.4.1.800.2.20.2.7.1.1 | ColumnxylanXIPXMAPHostMac | read-only | mandatory | The MAC Address of the MPM in the adjacent switch. |
| 1.3.6.1.4.1.800.2.20.2.7.1.2 | ColumnxylanXIPXMAPIpAddr | read-only | mandatory | An IP address of the adjacent switch. |