XYLANPNNI-MIB
106 objects
This MIB specifies additional Xylan functionality to the ATM Forum's PNNI MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.3.2.1.2 | IdentityxylanPnniMIB | This MIB specifies additional Xylan functionality to the ATM Forum's PNNI MIB. | ||
| 1.3.6.1.4.1.800.3.2.1.2.1 | NodexylanPnniMIBExtens | |||
| 1.3.6.1.4.1.800.3.2.1.2.1.1 | NodexylanPnniMIBObjs | |||
| 1.3.6.1.4.1.800.3.2.1.2.1.1.1 | TablexPnniAssociativeNameTable | not-accessible | mandatory | The xPnniAssociativeNameTable contains attributes that bind node names to PNNI Node IDs. There is a single row in this table for each PNNI node in the network.… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.1.1 | RowxPnniNameEntry | not-accessible | mandatory | An entry in the table, containing information about a PNNI node in this network. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.1.1.1 | ColumnxPnniNodeIndex | read-write | mandatory | The index into the associative name table. This index also corresponds to entries in the nodal map table. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.1.1.2 | ColumnxPnniNodeId | read-write | mandatory | The value of the 22-byte node ID which a switching system uses to represent itself in the peer-group. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.1.1.3 | ColumnxPnniNodeName | read-write | mandatory | The ASCII text string which represents this node. The default node name has the value NODE_n where n is 1..65535. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2 | TablexPnniAddressFilterTable | not-accessible | mandatory | The xPnniAddressFilterTable contains attributes that allow an administrator to configure address filters for security. Address filters are specified by the fol… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1 | RowxPnniAddressFilterEntry | not-accessible | mandatory | An entry in the table, containing information about a filter in this switching system. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.1 | ColumnxPnniFiltIndex | read-write | mandatory | The index into the PNNI Filter Table. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.2 | ColumnxPnniFiltNodeLevel | read-write | mandatory | The level of the node within this switching system. Note that filters may be defined for any level. If a node at a specific level is disabled, then correspondi… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.3 | ColumnxPnniFiltSrcPrefLen | read-write | mandatory | The length (in bits) of the source prefix. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.4 | ColumnxPnniFiltSrcPrefix | read-write | mandatory | The source prefix to be filtered. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.5 | ColumnxPnniFiltDestPrefLen | read-write | mandatory | The length (in bits) of the destination prefix. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.6 | ColumnxPnniFiltDestPrefix | read-write | mandatory | The destination prefix to be filtered. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.7 | ColumnxPnniFiltCallType | read-write | mandatory | The call type indicates if the filter is to be applied to point to point calls, point to multi-point calls (add parties), or to both. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.8 | ColumnxPnniFiltCallSrvCls | read-write | mandatory | The service class (if any) which this filter is active for. If the service class is CBR, then the xPnniFiltCallMtrcConstrnt field below must be set to PCR. If … |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.9 | ColumnxPnniFiltCallMtrcConstrnt | read-write | mandatory | A metric constraint that is used with xPnniFiltCallSrvCls. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.10 | ColumnxPnniFiltCallMtrcThresh | read-write | mandatory | A metric threshold value that is used with xPnniFiltCallSrvCls. The value 0 is only valid if the xPnniFiltCallSrvCls is none-specified. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.11 | ColumnxPnniFiltTrapThresh | read-write | mandatory | A threshold which when this number of filter hits are encountered, will cause a trap to be sent to all trap-clients. The value of 0 causes traps to be inhibite… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.12 | ColumnxPnniFiltSrcExceptionCriteria | read-write | mandatory | The criteria used to cause exceptions to the source address filters. If the value is none-specified, then the fields: xPnniFiltSrcExceptionLen and xPnniFiltSrc… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.13 | ColumnxPnniFiltSrcExceptionLen | read-write | mandatory | The length (in bits) of the exception address prefix attribute: xPnniFiltSrcException. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.14 | ColumnxPnniFiltSrcException | read-write | mandatory | The ATM Address Prefix of the source address exception. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.15 | ColumnxPnniFiltDestExceptionCriteria | read-write | mandatory | The criteria used to cause exceptions to the destination address filters. If the value is none-specified, then the fields: xPnniFiltDestExceptionLen and xPnniF… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.16 | ColumnxPnniFiltDestExceptionLen | read-write | mandatory | The length (in bits) of the exception address prefix attribute: xPnniFiltDestException. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.17 | ColumnxPnniFiltDestException | read-write | mandatory | The ATM Address Prefix of the destination address exception. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.18 | ColumnxPnniFiltDeniedHitCount | read-write | mandatory | A counter specifying how many times this filter was activated. Writing a 0 value to this field will cause this counter to be reset for this filter. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.19 | ColumnxPnniFiltExceptionHitCount | read-write | mandatory | A counter specifying how many times this filter was activated but an exception was permitted. Writing a 0 value to this field will cause this counter to be res… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.20 | ColumnxPnniFiltTODStartHr | read-write | mandatory | The hour of the day (using a 24 hour clock) when the filter is to be activated. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.21 | ColumnxPnniFiltTODStartMin | read-write | mandatory | The minute of the hour when the filter is to be activated. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.22 | ColumnxPnniFiltTODStartSec | read-write | mandatory | The second of the minute when the filter is to be activated. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.23 | ColumnxPnniFiltTODStopHr | read-write | mandatory | The hour of the day (using a 24 hour clock) when the filter is to be de-activated. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.24 | ColumnxPnniFiltTODStopMin | read-write | mandatory | The minute of the hour when the filter is to be de-activated. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.2.1.25 | ColumnxPnniFiltTODStopSec | read-write | mandatory | The second of the minute when the filter is to be de-activated. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3 | NodexPnniIAdjMIBObjects | |||
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1 | NodexPnniIAdjGroup | |||
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.1 | ScalarxPnniNumIAdj | read-only | mandatory | The number of adjacencies registered via ILMI in PNNIs lowest nodes adjacency table in this switching system. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2 | TablexPnniIAdjTable | not-accessible | mandatory | The xPnniIAdjTable stores records of adjacencies which ILMI has registered with the lowest level PNNI node in this network. There is a single row in this table… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2.1 | RowxPnniIAdjEntry | not-accessible | mandatory | An entry in the table, containing information about a PNNI logical node in this switching system. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2.1.1 | ColumnxPnniIAdjIndex | not-accessible | mandatory | A value assigned to an ILMI client registered via ILMI in this switching system that uniquely identifies it in the PNNI ILMI adjacency table. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2.1.2 | ColumnxPnniIAdjAtmAddress | read-only | mandatory | This adjacency's ATM End System Address. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2.1.3 | ColumnxPnniIAdjSlot | read-only | mandatory | The slot in which this adjacency is physically connected to this switching system. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2.1.4 | ColumnxPnniIAdjPort | read-only | mandatory | The port in the slot which this adjacency is physically connected to this switching system. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2.1.5 | ColumnxPnniIAdjInst | read-only | mandatory | The instance identifier on the slot port pair which this adjacency is physically connected to this switching system. In the event that this is not a tunnel, th… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2.1.6 | ColumnxPnniIAdjCsmPPort | read-only | mandatory | The unique port id which PNNI has bound to this physical slot, port, and instance tuple. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2.1.7 | ColumnxPnniIAdjAdvertised | read-only | mandatory | Indicates if this ILMI client is advertised by this switching system. Note that if this value is False, the summary address may be used by remote nodes to stil… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2.1.8 | ColumnxPnniIAdjSummarized | read-only | mandatory | Indicates if this ILMI client is summarized by this switching system. Note that if this value is True, other nodes in the peer group will route to this node's … |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.3.1.2.1.9 | ColumnxPnniIAdjLearned | read-only | mandatory | This field contains a timestamp of when ILMI registered this adjacency with PNNI. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4 | NodexPnniTestMIBObjects | |||
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1 | NodexPnniRtstMIBGroup | |||
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1 | TablexPnniRtstTable | not-accessible | mandatory | The xPnniRtstTable is a single-row table which returns the results of a route test requested by a remote mgmt station. The route test parameters are specified … |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1 | RowxPnniRtstEntry | not-accessible | mandatory | An entry in the route test table, containing information about a route lookup request. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.1 | ColumnxPnniRtstClass | not-accessible | mandatory | The class the route request is to use. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.2 | ColumnxPnniRtstType | not-accessible | mandatory | This index specifies the type of call which may be either point to point or point to multi-point. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.3 | ColumnxPnniRtstDest | not-accessible | mandatory | The destination address. This may be specified by the user as an address prefix, but the SNMP manager must pad this out to 20 octets. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.4 | ColumnxPnniRtstError | read-only | mandatory | Indicates if an error has occurred and if so, the nature of the error. If this is set to success, then no error occurred and the rest of the row contains usefu… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.5 | ColumnxPnniRtstFlags | read-only | mandatory | If error is set to success, this flag indicates the nature of the route lookup confirmation. If this flag is set to dtlAdded, then the route request resulted i… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.6 | ColumnxPnniRtstOutboundPort | read-only | mandatory | If error is set to success, this indicates the outbound port of the route lookup confirmation. If this is set to 0, then this indicates the call was placed to … |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.7 | ColumnxPnniRtstVPI | read-only | mandatory | If error is set to success, and xPnniRtstFlags is set to directEreach, then this indicates the vpi (if set by the user) used to route the call. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.8 | ColumnxPnniRtstE164 | read-only | mandatory | If error is set to success, and xPnniRtstFlags is set to directEreach, then this indicates the E.164 address (if set by the user) used to route the call. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.9 | ColumnxPnniRtstE164len | read-only | mandatory | If error is set to success, and xPnniRtstFlags is set to directEreach, then this indicates the number of significant octets used in the above E.164 address. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.10 | ColumnxPnniRtstHopCount | read-only | mandatory | If error is set to success, and xPnniRtstFlags is set to dtlAdded, then this indicates the number of hops in the xPnniRtstDTL. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.11 | ColumnxPnniRtstDTL | read-only | mandatory | If error is set to success, and xPnniRtstFlags is set to dtlAdded, then this indicates the DTL generated by the route lookup function in the switching system. … |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.1.1.1.12 | ColumnxPnniRtstCurPointer | read-only | mandatory | If error is set to success, and xPnniRtstFlags is set to dtlAdded, then this indicates the offset (in bytes) into xPnniRtstDTL of the curPtr. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2 | NodexPnniTrcMIBGroup | |||
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.1 | ScalarxPnniTrcBufSiz | read-write | mandatory | A value indicating the size of the trace capture buffer. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.2 | ScalarxPnniTrcBufTrigger | read-write | mandatory | A value indicating action on buffer capacity reached. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.3 | ScalarxPnniTrcBufControl | read-write | mandatory | A value indicating a control action on trace. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.4 | ScalarxPnniTrcNodeIndex | read-write | mandatory | This variable indicates the node index within this switching system to be traced. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5 | TablexPnniTrcTable | not-accessible | mandatory | The xPnniITrcTable stores records of captured frames from both the AAL-SAP as well as signalled RCCs. There is a single row in this table for each adjacency wh… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1 | RowxPnniTrcEntry | not-accessible | mandatory | An entry in the analyzer table, containing information about a PNNI received by a node in this switching system. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1.1 | ColumnxPnniTrcFrameIndex | read-only | mandatory | An index selecting a particular frame. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1.2 | ColumnxPnniTrcFrameFrag | read-only | mandatory | A fragment within a captured frame. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1.3 | ColumnxPnniTrcDirection | read-only | mandatory | Indicates whether the frame was transmitted or received. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1.4 | ColumnxPnniTrcSlot | read-only | mandatory | Indicates the physical slot where the frame was transmitted or received. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1.5 | ColumnxPnniTrcPort | read-only | mandatory | Indicates the physical port where the frame was transmitted or received. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1.6 | ColumnxPnniTrcCsmPPort | read-only | mandatory | Indicates the advertised PNNI port ID where the frame was transmitted or received. This is used primarily for signaled RCCs. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1.7 | ColumnxPnniTrcFrType | read-only | mandatory | Indicates the type of frame as specified in the ATM-Forum PNNI V1.0 Specification, Section 5.14.4, Table 5-21. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1.8 | ColumnxPnniTrcFrLen | read-only | mandatory | Indicates the overall frame length. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1.9 | ColumnxPnniTrcLearned | read-only | mandatory | Indicates the timestamp of when the frame was either transmitted or received. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.4.2.5.1.10 | ColumnxPnniTrcFrame | read-only | mandatory | Contains the raw frame contents. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.5 | TablexPnniAliasTable | not-accessible | mandatory | This table stores address (prefix) bindings for Display purposes. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.5.1 | RowxPnniAliasEntry | not-accessible | mandatory | An entry in the alias table containing information about a binding between PNNI address, nodeId or address prefix and a text string. When referring to a nodeId… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.5.1.1 | ColumnxPnniAliasIndex | read-write | mandatory | An index selecting a particular name-binding. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.5.1.2 | ColumnxPnniAliasName | read-write | mandatory | The name to be bound to the prefix. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.5.1.3 | ColumnxPnniAliasPrefLen | read-write | mandatory | An length (in bits) of the prefix binding. A Prefix length of 176 bits (22 Octets) implies a node ID. A length of 160 bits implies an ATM Address. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.5.1.4 | ColumnxPnniAliasPrefixBinding | read-write | mandatory | The prefix binding. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.6 | NodexPnniTrapMIBObjects | |||
| 1.3.6.1.4.1.800.3.2.1.2.1.1.6.1 | ScalarxPnniTrapPnPortId | read-only | mandatory | On a trap condition, this identifies the port-related variable. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.6.2 | ScalarxPnniTrapRouteAddrAddress | read-only | mandatory | On a trap condition, this identifies the address prefix-related variable. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.6.3 | ScalarxPnniTrapRouteAddrPrefixLength | read-only | mandatory | On a trap condition, this identifies the address prefix length related variable. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.6.4 | ScalarxPnniTrapFiltIndex | read-only | mandatory | On a trap condition, this identifies the filter index variable. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.6.5 | ScalarxPnniTrapNeighborId | read-only | mandatory | On a Neighbor trap condition, this identifies the neighbor node Id-related variable. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.6.6 | ScalarxPnniTrapNodeId | read-only | mandatory | On a trap condition, this identifies the local node ID variable which specifies the level and LGN or lowest level node. |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.6.7 | ScalarxPnniTrapNodeDownReason | read-only | mandatory | On a trap condition, this identifies the reason a node has gone down. A value of LocalUiAdmin specifies that a user on the MPM's Console or Modem Port has caus… |
| 1.3.6.1.4.1.800.3.2.1.2.1.1.6.8 | ScalarxPnniTrapNodeDownRemoteIPAddr | read-only | mandatory | If the above variable: xPnniTrapNodeDownReason indicates a value of either RemoteTelnet or then this variable indicates the remote IP Address of the entity cau… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| XPnniAddrPrefix | OCTET STRING (SIZE(19)) | ||
| XPnniAtmAddr | OCTET STRING (SIZE(0|20)) | ||
| XPnniFiltCallType | INTEGER { both-ptop-pmp(0), ptop(1), pmp(2) } | ||
| XPnniFilterPrefixLength | INTEGER (0..152) | ||
| XPnniFiltExceptionCriteria | INTEGER { none-specified(0), all-addrs-pass-except(1), no-addrs-pass-except(2) } | ||
| XPnniFiltMetricConstraint | INTEGER { none-specified(0), pcr(1), min-cr(2), scr(3), max-burst(4) } | ||
| XPnniFiltServiceCategory | INTEGER { none-specified(0), cbr(1), rtVbr(2), abr(3) } | ||
| XPnniNodeId | OCTET STRING (SIZE(22)) | ||
| XPnniNodeLevel | INTEGER (0..104) |