XYLO-MODEM-MIB
26 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.100.3 | NodemdmIdObjects | |||
| 1.3.6.1.4.1.15.2.100.3.1 | TablemdmIdTable | not-accessible | mandatory | A table of modem identification objects per modem. |
| 1.3.6.1.4.1.15.2.100.3.1.1 | RowmdmIdEntry | not-accessible | mandatory | A row in the modem identfication table. |
| 1.3.6.1.4.1.15.2.100.3.1.1.1 | ColumnmdmNumber | read-only | mandatory | A unique number from 1 to totalModems that identifies each internal modem. |
| 1.3.6.1.4.1.15.2.100.3.1.1.2 | ColumnmdmIdHardwareRev | read-only | mandatory | Modem hardware version. Note. 1. Currently we provide a hardware revision as part of the software revision string. This object returns a value of ascii 0 |
| 1.3.6.1.4.1.15.2.100.3.1.1.3 | ColumnmdmIdSoftwareRev | read-only | mandatory | Modem software version. This object obsoletes anxpModemFirmware. |
| 1.3.6.1.4.1.15.2.100.3.2 | ScalarmdmId56kProprietaryCode | read-only | mandatory | This object corresponds to the cli command set56k. none(1) means no proprietary modem code is running. In the future, when the 56k standard is in place, none(1… |
| 1.3.6.1.4.1.15.2.100.4 | NodemdmCtlObjects | |||
| 1.3.6.1.4.1.15.2.100.4.1 | ScalarmdmCtlResetAll | read-write | mandatory | Setting this object to execute(2) causes a hardware reset on all internal modems. This will terminate any active session on the modem. Setting this object will… |
| 1.3.6.1.4.1.15.2.100.4.2 | ScalarmdmCtlReadConfig | read-write | mandatory | Read modem config file. Setting this object to execute(2) will not disrupt active calls. The new configuration information is passed to the modem when connecti… |
| 1.3.6.1.4.1.15.2.100.4.3 | TablemdmCtlTable | not-accessible | mandatory | A table of modem control objects executable per modem. |
| 1.3.6.1.4.1.15.2.100.4.3.1 | RowmdmCtlEntry | not-accessible | mandatory | A row in the modem control table. |
| 1.3.6.1.4.1.15.2.100.4.3.1.1 | ColumnmdmCtlReset | read-write | mandatory | Does hardware reset on a specific modem. Executing this object will end any current session on the modem. However this object will not read or change the modem… |
| 1.3.6.1.4.1.15.2.100.4.3.1.2 | ColumnmdmCtlState | read-write | mandatory | Command to put a modem back into service (if busied out) or to put the modem out of service (if available). Busying out a modem will take the modem out of serv… |
| 1.3.6.1.4.1.15.2.100.4.4 | ScalarmdmCtlResetModemThresh | read-write | mandatory | After every configurable number (as specified by the modem_reset_threshold parameter) of consecutive failures on a modem, it will be reset. This will not affec… |
| 1.3.6.1.4.1.15.2.100.7 | NodemdmStatsObjects | |||
| 1.3.6.1.4.1.15.2.100.7.1 | TablemdmStatTable | not-accessible | mandatory | A table of modem statistics. |
| 1.3.6.1.4.1.15.2.100.7.1.1 | RowmdmStatEntry | not-accessible | mandatory | A row in the modem statistics table. |
| 1.3.6.1.4.1.15.2.100.7.1.1.1 | ColumnmdmStatAssign | read-only | mandatory | A call progress counter, displayed by CLI command 'inmoderr'. Number of times this modem has been assigned to a call. |
| 1.3.6.1.4.1.15.2.100.7.1.1.2 | ColumnmdmStatChat | read-only | mandatory | A call progress counter, displayed by CLI command 'inmoderr'. Number of times this modem has been told to answer. |
| 1.3.6.1.4.1.15.2.100.7.1.1.3 | ColumnmdmStatDcd | read-only | mandatory | A call progress counter, displayed by CLI command 'inmoderr'. Number of times this modem has established a connection. |
| 1.3.6.1.4.1.15.2.100.7.1.1.4 | ColumnmdmStatConsecFail | read-only | mandatory | A call progress counter, displayed by CLI command 'inmoderr'. Number of consecutive times this modem has failed to establish a connection. |
| 1.3.6.1.4.1.15.2.100.7.1.1.5 | ColumnmdmStatStatus | read-only | mandatory | Current State of the modem. State explaination are: busy(1) - Modem is handling a call. avail(2) - modem is idle and available. busiedOut(3) - modem is taken o… |
| 1.3.6.1.4.1.15.2.100.7.1.1.6 | ColumnmdmStatTotCalls | read-only | mandatory | The total number of calls handled by this modem. This counter is reset to zero after system reboot or after the modem is reset. |
| 1.3.6.1.4.1.15.2.100.7.1.1.7 | ColumnmdmStatTotFailures | read-only | mandatory | The total number of calls failed to be answered by this modem. This counter is reset to zero after system reboot or after the modem os reset. |
| 1.3.6.1.4.1.15.2.100.7.2 | ScalarmdmAvailModems | read-only | mandatory | The number of modems available to the dial-in point. That is, the number of modems not busy, buisied-out, failed, crashed, out of service or otherwise unavaila… |